Fiber quality measurement in spinning preparation is crucial for optimizing waste and meeting yarn quality specifications.The brand-new Uster AFIS 6–the next-generation laboratory instrument from Uster Technologies–...Fiber quality measurement in spinning preparation is crucial for optimizing waste and meeting yarn quality specifications.The brand-new Uster AFIS 6–the next-generation laboratory instrument from Uster Technologies–uniquely tests man-made fiber properties in addition to cotton.It provides critical data to optimize fiber process control for cotton,man-made fibers,and blended yarns.展开更多
Traditional studies on integrated statistical process control and engineering process control (SPC-EPC) are based on linear autoregressive integrated moving average (ARIMA) time series models to describe the dynamic n...Traditional studies on integrated statistical process control and engineering process control (SPC-EPC) are based on linear autoregressive integrated moving average (ARIMA) time series models to describe the dynamic noise of the system.However,linear models sometimes are unable to model complex nonlinear autocorrelation.To solve this problem,this paper presents an integrated SPC-EPC method based on smooth transition autoregressive (STAR) time series model,and builds a minimum mean squared error (MMSE) controller as well as an integrated SPC-EPC control system.The performance of this method for checking the trend and sustained shift is analyzed.The simulation results indicate that this integrated SPC-EPC control method based on STAR model is effective in controlling complex nonlinear systems.展开更多
The methylotrophic yeast Pichia pastoris is a highly successful system for production of a variety of heterologous proteins due to its unique features/abilities for effective protein expression, and tremendous efforts...The methylotrophic yeast Pichia pastoris is a highly successful system for production of a variety of heterologous proteins due to its unique features/abilities for effective protein expression, and tremendous efforts have been made to increase heterologous protein productivity by P. pastoris in recent years. When new engineered yeast strains are constructed and are ready to use tot industrial protein production, process control and optimization techniques should be applied to improve the fermentation performance in the following aspects： （1） increase recombinant cell concentrations in fermentor to high density during growth phase; （2） effectively induce heterologous proteins by enhancing/stabilizing titers or concentrations of the proteins during induction phase; （3） decrease operation costs by relieving the working loads of heat-exchange and oxygen supply. This article reviews and discusses the key and commonly used techniques in heterologous protein production by P. pastoris, with the focus on optimizations of fermentation media and basic operation conditions, development of optimal glycerol feeding strategies for achieving high density cultivation of P. pastoris and effective heterologous protein induction methods by regulating specific growth rate, methanol concentration, temperatures, mixture ratio of multi-carbon substrates, etc. Metabolic analysis for recombinant protein production by P. pastoris is also introduced to interpret the mechanism of sub-optimal heterologous protein production and to explore further optimal expression methods.展开更多
A hybrid neural network model,in which RH process(theoretical)model is combined organically with neural network(NN)and case-base reasoning(CBR),was established.The CBR method was used to select the operation mode and ...A hybrid neural network model,in which RH process(theoretical)model is combined organically with neural network(NN)and case-base reasoning(CBR),was established.The CBR method was used to select the operation mode and the RH operational guide parameters for different steel grades according to the initial conditions of molten steel,and a three-layer BP neural network was adopted to deal with nonlinear factors for improving and compensating the limitations of technological model for RH process control and end-point prediction.It was verified that the hybrid neural network is effective for improving the precision and calculation efficiency of the model.展开更多
Different amounts of absolute ethanol(0-50 mL)are used as process control agents(PCA)to prepare FeCoNiAlCr0.9 high entropy alloy(HEA)powders via 90 h ball milling.The results show that the increased amount of PCA play...Different amounts of absolute ethanol(0-50 mL)are used as process control agents(PCA)to prepare FeCoNiAlCr0.9 high entropy alloy(HEA)powders via 90 h ball milling.The results show that the increased amount of PCA plays an active role in the crystallinity of powders,and regulate the thickness and size distribution of flake particles.As the volume of PCA increases,the real and imaginary parts(ε′andε″)of complex permittivity get increased by the enhancement of the interface polarization and surface polarization,while the increase in the real and imaginary parts(μ′andμ″)of complex permeability arises from the increased anisotropic energy.The addition of PCA not only promotes the reflection loss but also extends the effective bandwidth(up to 4.28 GHz).Here,the performance adjustment of HEA electromagnetic absorber is realized by forthrightly changing the process parameters of ball milling.展开更多
Process control is an effective approach to reduce the NO_(x) emission from sintering flue gas.The effects of different materials adhered on coke breeze on NO_(x) emission characteristics and sintering performance wer...Process control is an effective approach to reduce the NO_(x) emission from sintering flue gas.The effects of different materials adhered on coke breeze on NO_(x) emission characteristics and sintering performance were studied.Results showed that the coke breeze adhered with the mixture of CaO and Fe_(2)O_(3) or calcium ferrite significantly lowers the NO_(x) emission concentration and conversion ratio of fuel-N to NO_(x).Pretreating the coke with the mixture of lime slurry and iron ore fines helped to improve the granulation effect,and optimize the carbon distribution in granules.When the mass ratio of coke breeze,quick lime,water and iron ore fines was 2:1:1:1,the average NO_(x) emission concentration was decreased from 220 mg/m^(3) to 166 mg/m^(3),and the conversion ratio of fuel-N was reduced from 54.2%to 40.9%.展开更多
On the basis of a simulated bright continuous annealing experimental machine, a process control model for heating system was built. The heating model was simplified and self-learning parameters were normalized to enha...On the basis of a simulated bright continuous annealing experimental machine, a process control model for heating system was built. The heating model was simplified and self-learning parameters were normalized to enhance the precision of temperature control. By means of the division of temperature layers and the exponential smoothing disposal of the annealing experimental data, the self-learning of the heating model was carried out. Through exponentially smoothing the deviation of self-learning parameters of the heated phase in heating process, dynamic modifications of self-learning parameters and heating electric current were carried out, and the precision of temperature control was confirmed. The application indicated that the process control model for the heating system can control temperature with high precision, and the deviation can be controlled within 8 ℃.展开更多
In recent years,the usage,management and benefit of large-scale scientific research instruments and equipment in scientific research institutes have been a leading issue in the management of scientific research instit...In recent years,the usage,management and benefit of large-scale scientific research instruments and equipment in scientific research institutes have been a leading issue in the management of scientific research institutes.Within the scope of equipment budget,it is necessary for each equipment acquisition team to conduct a round of communication,coordination and negotiation with suppliers in order to improve the cost performance of equipment procurement and maximize the performance index to meet the needs of scientific research.By introducing the practical experience of the State Key Laboratory in purchasing imported equipment and managing large-scale instruments,this paper probes into the management process of the imported large-scale scientific research tax-free equipment of scientific research institutes,and explores the system and methods to guarantee and improve the efficiency of large-scale instruments in scientific research institutes from the aspects of policy,funds and technology.展开更多
Semiconductor fabrication is a manufacturing sequence with hundreds of sophisticated unit operations and it is always challenged by strategy development for ensuring the yield of defect-free products.In this paper,an ...Semiconductor fabrication is a manufacturing sequence with hundreds of sophisticated unit operations and it is always challenged by strategy development for ensuring the yield of defect-free products.In this paper,an advanced control strategy through integrating product and process control is established.The proposed multiscale scheme contains three layers for coordinated equipment control,process control and product quality control.In the upper layer,online control performance assessment is applied to reduce the quality variation and maximize the overall product performance （OPP）.It serves as supervisory control to update the recipe of the process controller in the middle layer.The process controller is designed as an exponentially weighted moving average （EWMA） run-to-run controller to reject disturbances,such as process shift,drift and tool worn out,that are exerted to the op-eration.The equipment in the process is individually controlled to maintain its optimal operational status and maximize the overall equipment effectiveness （OEE）,based on the set point given by the process controller.The ef-ficacy of the proposed integrated control scheme is demonstrated through case studies,where both the OPP （for product） and the OEE （for equipment） are enhanced.展开更多
Design of general multivariable process controllers is an attractive and practical alternative to optimizing design by evolutionary algorithms (EAs) since it can be formulated as an optimization problem. A closed-loop...Design of general multivariable process controllers is an attractive and practical alternative to optimizing design by evolutionary algorithms (EAs) since it can be formulated as an optimization problem. A closed-loop particle swarm optimization (CLPSO) algorithm is proposed by mapping PSO elements into the closed-loop system based on control theories. At each time step, a proportional integral (PI) controller is used to calculate an updated inertia weight for each particle in swarms from its last fitness. With this modification, limitations caused by a uniform inertia weight for the whole population are avoided, and the particles have enough diversity. After the effectiveness, efficiency and robustness are tested by benchmark functions, CLPSO is applied to design a multivariable proportional-integral-derivative (PID) controller for a solvent dehydration tower in a chemical plant and has improved its performances.展开更多
When designing a complex mechatronics system, such as high speed trains, it is relatively difficult to effectively simulate the entire system＇s dynamic behaviors because it involves multi-disciplinary subsystems. Cur...When designing a complex mechatronics system, such as high speed trains, it is relatively difficult to effectively simulate the entire system＇s dynamic behaviors because it involves multi-disciplinary subsystems. Currently, a most practical approach for multi-disciplinary simulation is interface based coupling simulation method, but it faces a twofold challenge： spatial and time unsynchronizations among multi-directional coupling simulation of subsystems. A new collaborative simulation method with spatiotemporal synchronization process control is proposed for coupling simulating a given complex mechatronics system across multiple subsystems on different platforms. The method consists of 1） a coupler-based coupling mechanisms to define the interfacing and interaction mechanisms among subsystems, and 2） a simulation process control algorithm to realize the coupling simulation in a spatiotemporal synchronized manner. The test results from a case study show that the proposed method 1） can certainly be used to simulate the sub-systems interactions under different simulation conditions in an engineering system, and 2） effectively supports multi-directional coupling simulation among multi-disciplinary subsystems. This method has been successfully applied in China high speed train design and development processes, demonstrating that it can be applied in a wide range of engineering systems design and simulation with improved efficiency and effectiveness.展开更多
The physical properties of thermosetting resins and resin based composites may be influenced by changes in any one of the mang formulating or process related variables involved in their manufacture. When resins and co...The physical properties of thermosetting resins and resin based composites may be influenced by changes in any one of the mang formulating or process related variables involved in their manufacture. When resins and composite materials are required to perform in aggressive environments, reliable and predicable performance is essential and therefore these materials must be prepared and tested in accorkance with a strictquality plan. This paper outlines the elements of statistical process control (S.P.C.)as it may be applied to non-metallic materials and discusses the concept of Capability Index (Cp).展开更多
Greenhouse environmental management,seedling bed scheduling,and fertilizer and water management are the core technologies of seedling nursery.Precision management and control of the whole production process guarantees...Greenhouse environmental management,seedling bed scheduling,and fertilizer and water management are the core technologies of seedling nursery.Precision management and control of the whole production process guarantees high grated seedling quality.In order to improve management efficiency of grafted watermelon seedling production and seedling quality,this paper designs and develops a grafted watermelon seedling production management system based on process control methods by process control strategy,seedling bed planning design,and handheld device technology.展开更多
For aircraft manufacturing industries, the analyses and prediction of part machining error during machining process are very important to control and improve part machining quality. In order to effectively control mac...For aircraft manufacturing industries, the analyses and prediction of part machining error during machining process are very important to control and improve part machining quality. In order to effectively control machining error, the method of integrating multivariate statistical process control （MSPC） and stream of variations （SoV） is proposed. Firstly, machining error is modeled by multi-operation approaches for part machining process. SoV is adopted to establish the mathematic model of the relationship between the error of upstream operations and the error of downstream operations. Here error sources not only include the influence of upstream operations but also include many of other error sources. The standard model and the predicted model about SoV are built respectively by whether the operation is done or not to satisfy different requests during part machining process. Secondly, the method of one-step ahead forecast error （OSFE） is used to eliminate autocorrelativity of the sample data from the SoV model, and the T2 control chart in MSPC is built to realize machining error detection according to the data characteristics of the above error model, which can judge whether the operation is out of control or not. If it is, then feedback is sent to the operations. The error model is modified by adjusting the operation out of control, and continually it is used to monitor operations. Finally, a machining instance containing two operations demonstrates the effectiveness of the machining error control method presented in this paper.展开更多
Anomaly detection is becoming increasingly significant in industrial cyber security,and different machine-learning algorithms have been generally acknowledged as various effective intrusion detection engines to succes...Anomaly detection is becoming increasingly significant in industrial cyber security,and different machine-learning algorithms have been generally acknowledged as various effective intrusion detection engines to successfully identify cyber attacks.However,different machine-learning algorithms may exhibit their own detection effects even if they analyze the same feature samples.As a sequence,after developing one feature generation approach,the most effective and applicable detection engines should be desperately selected by comparing distinct properties of each machine-learning algorithm.Based on process control features generated by directed function transition diagrams,this paper introduces five different machine-learning algorithms as alternative detection engines to discuss their matching abilities.Furthermore,this paper not only describes some qualitative properties to compare their advantages and disadvantages,but also gives an in-depth and meticulous research on their detection accuracies and consuming time.In the verified experiments,two attack models and four different attack intensities are defined to facilitate all quantitative comparisons,and the impacts of detection accuracy caused by the feature parameter are also comparatively analyzed.All experimental results can clearly explain that SVM(Support Vector Machine)and WNN(Wavelet Neural Network)are suggested as two applicable detection engines under differing cases.展开更多
To overcome the large time-delay in measuring the hardness of mixed rubber, rheological parameters were used to predict the hardness. A novel Q-based model updating strategy was proposed as a universal platform to tra...To overcome the large time-delay in measuring the hardness of mixed rubber, rheological parameters were used to predict the hardness. A novel Q-based model updating strategy was proposed as a universal platform to track time-varying properties. Using a few selected support samples to update the model, the strategy could dramat- ically save the storage cost and overcome the adverse influence of low signal-to-noise ratio samples. Moreover, it could be applied to any statistical process monitoring system without drastic changes to them, which is practical for industrial practices. As examples, the Q-based strategy was integrated with three popular algorithms （partial least squares （PIE）, recursive PIE （RPLS）, and kernel PIE （KPIE）） to form novel regression ones, QPLS, QRPIE and QKPLS, respectively. The applications for predicting mixed rubber hardness on a large-scale tire plant in east China prove the theoretical considerations.展开更多
Managing TG-51 reference dosimetry in a large hospital network can be a challenging task. The objectives of this study are to investigate the effectiveness of using Statistical Process Control (SPC) to manage TG-51 wo...Managing TG-51 reference dosimetry in a large hospital network can be a challenging task. The objectives of this study are to investigate the effectiveness of using Statistical Process Control (SPC) to manage TG-51 workflow in such a network. All the sites in the network performed the annual reference dosimetry in water according to TG-51. These data were used to cross-calibrate the same ion chambers in plastic phantoms for monthly QA output measurements. An energy-specific dimensionless beam quality cross-calibration factor, <img src="Edit_6bfb9907-c034-4197-97a7-e8337a7fc21a.png" width="20" height="19" alt="" />, was derived to monitor the process across multiple sites. The SPC analysis was then performed to obtain the mean, <img src="Edit_c630a2dd-f714-4042-a46e-da0ca863cb41.png" width="30" height="20" alt="" /> , standard deviation, <span style="font-size:6.5pt;font-family:;" "=""><span style="white-space:normal;"><span style="font-size:6.5pt;font-family:"">σ</span><span style="white-space:nowrap;"><sub><i>k</i></sub></span></span></span>, the Upper Control Limit (UCL) and Lower Control Limit (LCL) in each beam. This process was first applied to 15 years of historical data at the main campus to assess the effectiveness of the process. A two-year prospective study including all 30 linear accelerators spread over the main campus and seven satellites in the network followed. The ranges of the control limits (±3σ) were found to be in the range of 1.7% - 2.6% and 3.3% - 4.2% for the main campus and the satellite sites respectively. The wider range in the satellite sites was attributed to variations in the workflow. Standardization of workflow was also found to be effective in narrowing the control limits. The SPC is effective in identifying variations in the workflow and was shown to be an effective tool in managing large network reference dosimetry.展开更多
Advanced Process Control （APC） is necessary for oil refining and chemical process in China, but some problems have emerged in the application of APC techniques in this field. This paper discusses the conditions of A...Advanced Process Control （APC） is necessary for oil refining and chemical process in China, but some problems have emerged in the application of APC techniques in this field. This paper discusses the conditions of APC application concerning process design, distributed control system （DCS） choice and regular control. It analyzes the problems and strategies in APC application. Some suggestions are proposed for the enterprise to benefit from APC application.展开更多
The influence of process control agents （PCAs） on the mechanical properties of Ni3AI intermetallic compounds by mechanical alloying was investigated in order to develop oxide deposition reinforced intermetallics. Th...The influence of process control agents （PCAs） on the mechanical properties of Ni3AI intermetallic compounds by mechanical alloying was investigated in order to develop oxide deposition reinforced intermetallics. The PCAs in mechanical alloying were pure ligroin, 75 vol.% ligroin ＋ 25 vol.% alcohol, 50 vol.% ligroin ＋ 50 vol.% alcohol, 25 vol.% ligroin ＋ 75 vol.% alcohol, and pure alcohol. The normal composition is Ni-22.9at.%Al-0.5at.%B, the ball-to-powder weight ratio is 10：1, and the milling time is 30 min. Then, the powders were sintered by spark plasma sintering under 40 MPa for 5 min at 1000℃. The results show that a higher bending strength and a higher hardness were obtained when the PCAs were 75% ligroin ＋ 25% alcohol in mechanical alloying. The bending strength is about 2700 MPa and the hardness （HV） is more than 6 GPa.展开更多
文摘Fiber quality measurement in spinning preparation is crucial for optimizing waste and meeting yarn quality specifications.The brand-new Uster AFIS 6–the next-generation laboratory instrument from Uster Technologies–uniquely tests man-made fiber properties in addition to cotton.It provides critical data to optimize fiber process control for cotton,man-made fibers,and blended yarns.
基金Supported by National Natural Science Foundation of China (No. 70931004)
文摘Traditional studies on integrated statistical process control and engineering process control (SPC-EPC) are based on linear autoregressive integrated moving average (ARIMA) time series models to describe the dynamic noise of the system.However,linear models sometimes are unable to model complex nonlinear autocorrelation.To solve this problem,this paper presents an integrated SPC-EPC method based on smooth transition autoregressive (STAR) time series model,and builds a minimum mean squared error (MMSE) controller as well as an integrated SPC-EPC control system.The performance of this method for checking the trend and sustained shift is analyzed.The simulation results indicate that this integrated SPC-EPC control method based on STAR model is effective in controlling complex nonlinear systems.
基金Supported by the Key Agricultral Technology Program of Shanghai Science & Technology Committee(073919108)MajorState Basic Research Development Program of China(2007CB714303)
文摘The methylotrophic yeast Pichia pastoris is a highly successful system for production of a variety of heterologous proteins due to its unique features/abilities for effective protein expression, and tremendous efforts have been made to increase heterologous protein productivity by P. pastoris in recent years. When new engineered yeast strains are constructed and are ready to use tot industrial protein production, process control and optimization techniques should be applied to improve the fermentation performance in the following aspects： （1） increase recombinant cell concentrations in fermentor to high density during growth phase; （2） effectively induce heterologous proteins by enhancing/stabilizing titers or concentrations of the proteins during induction phase; （3） decrease operation costs by relieving the working loads of heat-exchange and oxygen supply. This article reviews and discusses the key and commonly used techniques in heterologous protein production by P. pastoris, with the focus on optimizations of fermentation media and basic operation conditions, development of optimal glycerol feeding strategies for achieving high density cultivation of P. pastoris and effective heterologous protein induction methods by regulating specific growth rate, methanol concentration, temperatures, mixture ratio of multi-carbon substrates, etc. Metabolic analysis for recombinant protein production by P. pastoris is also introduced to interpret the mechanism of sub-optimal heterologous protein production and to explore further optimal expression methods.
基金Item Sponsored by National Natural Science Foundation of China(50074026)
文摘A hybrid neural network model,in which RH process(theoretical)model is combined organically with neural network(NN)and case-base reasoning(CBR),was established.The CBR method was used to select the operation mode and the RH operational guide parameters for different steel grades according to the initial conditions of molten steel,and a three-layer BP neural network was adopted to deal with nonlinear factors for improving and compensating the limitations of technological model for RH process control and end-point prediction.It was verified that the hybrid neural network is effective for improving the precision and calculation efficiency of the model.
基金the National Natural Science Foundation of China(Nos.51577021 and U1704253)the National Key R&D Program of China(No.2017YFB0703103)the Fundamental Research Funds for the Central Universities(No.DUT20GF111)。
文摘Different amounts of absolute ethanol(0-50 mL)are used as process control agents(PCA)to prepare FeCoNiAlCr0.9 high entropy alloy(HEA)powders via 90 h ball milling.The results show that the increased amount of PCA plays an active role in the crystallinity of powders,and regulate the thickness and size distribution of flake particles.As the volume of PCA increases,the real and imaginary parts(ε′andε″)of complex permittivity get increased by the enhancement of the interface polarization and surface polarization,while the increase in the real and imaginary parts(μ′andμ″)of complex permeability arises from the increased anisotropic energy.The addition of PCA not only promotes the reflection loss but also extends the effective bandwidth(up to 4.28 GHz).Here,the performance adjustment of HEA electromagnetic absorber is realized by forthrightly changing the process parameters of ball milling.
基金Project(2017YFC0210302)supported by the National Key R&D Program of ChinaProjects(U1660206,U1760107)supported by the National Natural Science Foundation of China
文摘Process control is an effective approach to reduce the NO_(x) emission from sintering flue gas.The effects of different materials adhered on coke breeze on NO_(x) emission characteristics and sintering performance were studied.Results showed that the coke breeze adhered with the mixture of CaO and Fe_(2)O_(3) or calcium ferrite significantly lowers the NO_(x) emission concentration and conversion ratio of fuel-N to NO_(x).Pretreating the coke with the mixture of lime slurry and iron ore fines helped to improve the granulation effect,and optimize the carbon distribution in granules.When the mass ratio of coke breeze,quick lime,water and iron ore fines was 2:1:1:1,the average NO_(x) emission concentration was decreased from 220 mg/m^(3) to 166 mg/m^(3),and the conversion ratio of fuel-N was reduced from 54.2%to 40.9%.
基金Item Sponsored by National Natural Science Foundation of China (50527402)
文摘On the basis of a simulated bright continuous annealing experimental machine, a process control model for heating system was built. The heating model was simplified and self-learning parameters were normalized to enhance the precision of temperature control. By means of the division of temperature layers and the exponential smoothing disposal of the annealing experimental data, the self-learning of the heating model was carried out. Through exponentially smoothing the deviation of self-learning parameters of the heated phase in heating process, dynamic modifications of self-learning parameters and heating electric current were carried out, and the precision of temperature control was confirmed. The application indicated that the process control model for the heating system can control temperature with high precision, and the deviation can be controlled within 8 ℃.
文摘In recent years,the usage,management and benefit of large-scale scientific research instruments and equipment in scientific research institutes have been a leading issue in the management of scientific research institutes.Within the scope of equipment budget,it is necessary for each equipment acquisition team to conduct a round of communication,coordination and negotiation with suppliers in order to improve the cost performance of equipment procurement and maximize the performance index to meet the needs of scientific research.By introducing the practical experience of the State Key Laboratory in purchasing imported equipment and managing large-scale instruments,this paper probes into the management process of the imported large-scale scientific research tax-free equipment of scientific research institutes,and explores the system and methods to guarantee and improve the efficiency of large-scale instruments in scientific research institutes from the aspects of policy,funds and technology.
文摘Semiconductor fabrication is a manufacturing sequence with hundreds of sophisticated unit operations and it is always challenged by strategy development for ensuring the yield of defect-free products.In this paper,an advanced control strategy through integrating product and process control is established.The proposed multiscale scheme contains three layers for coordinated equipment control,process control and product quality control.In the upper layer,online control performance assessment is applied to reduce the quality variation and maximize the overall product performance （OPP）.It serves as supervisory control to update the recipe of the process controller in the middle layer.The process controller is designed as an exponentially weighted moving average （EWMA） run-to-run controller to reject disturbances,such as process shift,drift and tool worn out,that are exerted to the op-eration.The equipment in the process is individually controlled to maintain its optimal operational status and maximize the overall equipment effectiveness （OEE）,based on the set point given by the process controller.The ef-ficacy of the proposed integrated control scheme is demonstrated through case studies,where both the OPP （for product） and the OEE （for equipment） are enhanced.
文摘Design of general multivariable process controllers is an attractive and practical alternative to optimizing design by evolutionary algorithms (EAs) since it can be formulated as an optimization problem. A closed-loop particle swarm optimization (CLPSO) algorithm is proposed by mapping PSO elements into the closed-loop system based on control theories. At each time step, a proportional integral (PI) controller is used to calculate an updated inertia weight for each particle in swarms from its last fitness. With this modification, limitations caused by a uniform inertia weight for the whole population are avoided, and the particles have enough diversity. After the effectiveness, efficiency and robustness are tested by benchmark functions, CLPSO is applied to design a multivariable proportional-integral-derivative (PID) controller for a solvent dehydration tower in a chemical plant and has improved its performances.
基金Supported by National High Technology Research and Development Program of China(863 Program,Grant No.2015AA043701-02)
文摘When designing a complex mechatronics system, such as high speed trains, it is relatively difficult to effectively simulate the entire system＇s dynamic behaviors because it involves multi-disciplinary subsystems. Currently, a most practical approach for multi-disciplinary simulation is interface based coupling simulation method, but it faces a twofold challenge： spatial and time unsynchronizations among multi-directional coupling simulation of subsystems. A new collaborative simulation method with spatiotemporal synchronization process control is proposed for coupling simulating a given complex mechatronics system across multiple subsystems on different platforms. The method consists of 1） a coupler-based coupling mechanisms to define the interfacing and interaction mechanisms among subsystems, and 2） a simulation process control algorithm to realize the coupling simulation in a spatiotemporal synchronized manner. The test results from a case study show that the proposed method 1） can certainly be used to simulate the sub-systems interactions under different simulation conditions in an engineering system, and 2） effectively supports multi-directional coupling simulation among multi-disciplinary subsystems. This method has been successfully applied in China high speed train design and development processes, demonstrating that it can be applied in a wide range of engineering systems design and simulation with improved efficiency and effectiveness.
文摘The physical properties of thermosetting resins and resin based composites may be influenced by changes in any one of the mang formulating or process related variables involved in their manufacture. When resins and composite materials are required to perform in aggressive environments, reliable and predicable performance is essential and therefore these materials must be prepared and tested in accorkance with a strictquality plan. This paper outlines the elements of statistical process control (S.P.C.)as it may be applied to non-metallic materials and discusses the concept of Capability Index (Cp).
基金the National High Technology Research and Development Program (863) of China(No.2012AA101903)the Shanghai Municipal Agriculture Commission Program(No.20100401)+1 种基金the Science and Technology Commission of Shanghai Municipality Program(No.11DZ1960203)the Shanghai Watermelon and Melon Industry Technology System and the Shanghai Leading Academic Discipline Project Program(No.B209)
文摘Greenhouse environmental management,seedling bed scheduling,and fertilizer and water management are the core technologies of seedling nursery.Precision management and control of the whole production process guarantees high grated seedling quality.In order to improve management efficiency of grafted watermelon seedling production and seedling quality,this paper designs and develops a grafted watermelon seedling production management system based on process control methods by process control strategy,seedling bed planning design,and handheld device technology.
基金National Natural Science Foundation of China (70931004)
文摘For aircraft manufacturing industries, the analyses and prediction of part machining error during machining process are very important to control and improve part machining quality. In order to effectively control machining error, the method of integrating multivariate statistical process control （MSPC） and stream of variations （SoV） is proposed. Firstly, machining error is modeled by multi-operation approaches for part machining process. SoV is adopted to establish the mathematic model of the relationship between the error of upstream operations and the error of downstream operations. Here error sources not only include the influence of upstream operations but also include many of other error sources. The standard model and the predicted model about SoV are built respectively by whether the operation is done or not to satisfy different requests during part machining process. Secondly, the method of one-step ahead forecast error （OSFE） is used to eliminate autocorrelativity of the sample data from the SoV model, and the T2 control chart in MSPC is built to realize machining error detection according to the data characteristics of the above error model, which can judge whether the operation is out of control or not. If it is, then feedback is sent to the operations. The error model is modified by adjusting the operation out of control, and continually it is used to monitor operations. Finally, a machining instance containing two operations demonstrates the effectiveness of the machining error control method presented in this paper.
基金This work is supported by the Scientific Research Project of Educational Department of Liaoning Province(Grant No.LJKZ0082)the Program of Hainan Association for Science and Technology Plans to Youth R&D Innovation(Grant No.QCXM201910)+2 种基金the National Natural Science Foundation of China(Grant Nos.61802092 and 92067110)the Hainan Provincial Natural Science Foundation of China(Grant No.620RC562)2020 Industrial Internet Innovation and Development Project-Industrial Internet Identification Data Interaction Middleware and Resource Pool Service Platform Project,Ministry of Industry and Information Technology of the People’s Republic of China.
文摘Anomaly detection is becoming increasingly significant in industrial cyber security,and different machine-learning algorithms have been generally acknowledged as various effective intrusion detection engines to successfully identify cyber attacks.However,different machine-learning algorithms may exhibit their own detection effects even if they analyze the same feature samples.As a sequence,after developing one feature generation approach,the most effective and applicable detection engines should be desperately selected by comparing distinct properties of each machine-learning algorithm.Based on process control features generated by directed function transition diagrams,this paper introduces five different machine-learning algorithms as alternative detection engines to discuss their matching abilities.Furthermore,this paper not only describes some qualitative properties to compare their advantages and disadvantages,but also gives an in-depth and meticulous research on their detection accuracies and consuming time.In the verified experiments,two attack models and four different attack intensities are defined to facilitate all quantitative comparisons,and the impacts of detection accuracy caused by the feature parameter are also comparatively analyzed.All experimental results can clearly explain that SVM(Support Vector Machine)and WNN(Wavelet Neural Network)are suggested as two applicable detection engines under differing cases.
文摘To overcome the large time-delay in measuring the hardness of mixed rubber, rheological parameters were used to predict the hardness. A novel Q-based model updating strategy was proposed as a universal platform to track time-varying properties. Using a few selected support samples to update the model, the strategy could dramat- ically save the storage cost and overcome the adverse influence of low signal-to-noise ratio samples. Moreover, it could be applied to any statistical process monitoring system without drastic changes to them, which is practical for industrial practices. As examples, the Q-based strategy was integrated with three popular algorithms （partial least squares （PIE）, recursive PIE （RPLS）, and kernel PIE （KPIE）） to form novel regression ones, QPLS, QRPIE and QKPLS, respectively. The applications for predicting mixed rubber hardness on a large-scale tire plant in east China prove the theoretical considerations.
文摘Managing TG-51 reference dosimetry in a large hospital network can be a challenging task. The objectives of this study are to investigate the effectiveness of using Statistical Process Control (SPC) to manage TG-51 workflow in such a network. All the sites in the network performed the annual reference dosimetry in water according to TG-51. These data were used to cross-calibrate the same ion chambers in plastic phantoms for monthly QA output measurements. An energy-specific dimensionless beam quality cross-calibration factor, <img src="Edit_6bfb9907-c034-4197-97a7-e8337a7fc21a.png" width="20" height="19" alt="" />, was derived to monitor the process across multiple sites. The SPC analysis was then performed to obtain the mean, <img src="Edit_c630a2dd-f714-4042-a46e-da0ca863cb41.png" width="30" height="20" alt="" /> , standard deviation, <span style="font-size:6.5pt;font-family:;" "=""><span style="white-space:normal;"><span style="font-size:6.5pt;font-family:"">σ</span><span style="white-space:nowrap;"><sub><i>k</i></sub></span></span></span>, the Upper Control Limit (UCL) and Lower Control Limit (LCL) in each beam. This process was first applied to 15 years of historical data at the main campus to assess the effectiveness of the process. A two-year prospective study including all 30 linear accelerators spread over the main campus and seven satellites in the network followed. The ranges of the control limits (±3σ) were found to be in the range of 1.7% - 2.6% and 3.3% - 4.2% for the main campus and the satellite sites respectively. The wider range in the satellite sites was attributed to variations in the workflow. Standardization of workflow was also found to be effective in narrowing the control limits. The SPC is effective in identifying variations in the workflow and was shown to be an effective tool in managing large network reference dosimetry.
文摘Advanced Process Control （APC） is necessary for oil refining and chemical process in China, but some problems have emerged in the application of APC techniques in this field. This paper discusses the conditions of APC application concerning process design, distributed control system （DCS） choice and regular control. It analyzes the problems and strategies in APC application. Some suggestions are proposed for the enterprise to benefit from APC application.
文摘The influence of process control agents （PCAs） on the mechanical properties of Ni3AI intermetallic compounds by mechanical alloying was investigated in order to develop oxide deposition reinforced intermetallics. The PCAs in mechanical alloying were pure ligroin, 75 vol.% ligroin ＋ 25 vol.% alcohol, 50 vol.% ligroin ＋ 50 vol.% alcohol, 25 vol.% ligroin ＋ 75 vol.% alcohol, and pure alcohol. The normal composition is Ni-22.9at.%Al-0.5at.%B, the ball-to-powder weight ratio is 10：1, and the milling time is 30 min. Then, the powders were sintered by spark plasma sintering under 40 MPa for 5 min at 1000℃. The results show that a higher bending strength and a higher hardness were obtained when the PCAs were 75% ligroin ＋ 25% alcohol in mechanical alloying. The bending strength is about 2700 MPa and the hardness （HV） is more than 6 GPa.
