Ni-based coating,a kind of surface material,is characterized by high hardness,outstanding wear resistance,and excellent corrosion resistance.Ni-based coatings doped with hard phases can improve the coating quality.Thi...Ni-based coating,a kind of surface material,is characterized by high hardness,outstanding wear resistance,and excellent corrosion resistance.Ni-based coatings doped with hard phases can improve the coating quality.This is an important topic in related fields.Compared with traditional Ni-based coatings,Ni-based coatings doped with a hard phase have stronger competitive advantages.Among these,Ni-based diamond composite coatings have superior performance.Hence,it has become a kind of excellent functional coating.We outline the current state of research on Ni-based diamond composite coatings.Advances in seven preparation processes for Ni-based diamond composite coatings were discussed.These processes mainly include brazing,electrodeposition,sintering,laser cladding,plasma spraying,supersonic laser deposition,and vacuum cladding.The latest studies on the interfacial behavior,microstructure,and bond strength of these composite coatings are also summarized.The deficiencies for present Ni-based diamond composite coatings are pointed out.Meanwhile,the developmental directions of related fields are envisioned.That could provide theoretical guidance and reference information for research and technological development in the near future.展开更多
[Objectives] To establish the preparation process and quality standard of Rougan Huaxian ointment.[Methods] The L_(9)(3^(4)) orthogonal test was employed to optimize the preparation process by considering the multipli...[Objectives] To establish the preparation process and quality standard of Rougan Huaxian ointment.[Methods] The L_(9)(3^(4)) orthogonal test was employed to optimize the preparation process by considering the multiplication of water addition, extraction time, and extraction frequency as influencing factors. The dry paste yield was utilized as the evaluation criterion, in conjunction with the actual production conditions. Thin layer chromatography was employed to identify Radix Astragali, Lycii Fructus, Herba Dendrobii, and Rhizoma Polygoni Cuspidati. Ethanol served as the solvent for the determination of ethanol-soluble extractives using the cold immersion method.[Results] The preparation process was conducted as follows: the specified quantity of medicinal materials was combined with water for extraction purposes, performed in two separate stages. In each stage, eight times the amount of water was added. The first extraction lasted for 1.5 h, while the second extraction was completed in 1.0 h. The resulting liquid was then concentrated into a thick paste with a relative density ranging from 1.25 to 1.30 at a temperature of 60 ℃. The thin-layer chromatography analysis of Radix Astragali, Lycii Fructus, Herba Dendrobii, and Rhizoma Polygoni Cuspidati demonstrated distinct spots, effective separation, and the absence of interference from negative samples. Additionally, the ethanol-soluble extractives yielded a minimum of 8.0% in terms of dry weight.[Conclusions] The preparation process for Rougan Huaxian ointment is both stable and feasible. Furthermore, the quality standards established for this preparation are unique and reproducible, thereby facilitating effective quality control.展开更多
Objective The objective of this study was to investigate the preparation process of Mahuang Xixin Fuzi decoction granules based on the clinical pharmacological effects of the classic formulas and to control the qualit...Objective The objective of this study was to investigate the preparation process of Mahuang Xixin Fuzi decoction granules based on the clinical pharmacological effects of the classic formulas and to control the quality of the product.Methods An orthogonal experimental design was used,with extraction yield and transfer rate of key ingredients as evaluation indicators,to optimize the extraction process ofMahuang Xixin Fuzi decoction.The granulation process was optimized based on indicators such as granule formation rate,dissolution rate,and moisture absorption rate.Results The optimal extraction process for Mahuang Xixin Fuzi decoction was determined as the following:using 10 times the amount of water to soak for 30 minutes,extracting three times,each for 60minutes,with a concentrated extract relative density of 1.3 g/mL.A mixture of dextrin and starch at a 1:2 ratio was used as a binder for wet granulation.The granule formation rate,dissolution time,and dilution rate of three repeated batches showed relative standard deviation(RSD)values of 1.48,2.83,and 1.55%.Conclusion This method is stable and feasible,providing valuable data for the industrial production of Mahuang Xixin Fuzi decoction granules and further research on this formulation.展开更多
Based on the analysis of the preparation of metal rubber （MR） and two pivotal hypotheses, the uniform distribution and the unaltered topological structure of wires in the radial direction of columns in the punch pro...Based on the analysis of the preparation of metal rubber （MR） and two pivotal hypotheses, the uniform distribution and the unaltered topological structure of wires in the radial direction of columns in the punch process, a 3D parametrical model was established based on four approaches： helix-making, planar roughcast-weaving, planar roughcast-rolling, and 3D roughcast punching. In the modeling process, 5 lattice types of weave patterns in planar roughcast were put forward, and 10 quantificational modeling parameters were picked up to exclusively define the column MR component structure. The wire distribution was visualized by CAD techniques. The important performance parameter of column MR components （relative density ρ^- ） can be forecasted by modeling computing, which provides the necessary foundation for the design and optimization of MR materials.展开更多
In order to increase the accuracy of microscopic traffic flow simulation,two acceleration models are presented to simulate car-following behaviors of the lane-changing vehicle and following putative vehicle during the...In order to increase the accuracy of microscopic traffic flow simulation,two acceleration models are presented to simulate car-following behaviors of the lane-changing vehicle and following putative vehicle during the discretionary lanechanging preparation( DLCP) process, respectively. The proposed acceleration models can reflect vehicle interaction characteristics. Samples used for describing the starting point and the ending point of DLCP are extracted from a real NGSIM vehicle trajectory data set. The acceleration model for a lanechanging vehicle is supposed to be a linear acceleration model.The acceleration model for the following putative vehicle is constructed by referring to the optimal velocity model,in which optimal velocity is defined as a linear function of the velocity of putative leading vehicle. Similar calibration,a hypothesis test and parameter sensitivity analysis were conducted on the acceleration model of the lane-changing vehicle and following putative vehicle,respectively. The validation results of the two proposed models suggest that the training and testing errors are acceptable compared with similar works on calibrations for car following models. The parameter sensitivity analysis shows that the subtle observed error does not lead to severe variations of car-following behaviors of the lane-changing vehicle and following putative vehicle.展开更多
[Objectives]This study was conducted to optimize the preparation process of Tianlu Tongluo Granules and establish its quality standard.[Methods]Tianlu Tongluo Granules was prepared by an orthogonal test.TLC was used t...[Objectives]This study was conducted to optimize the preparation process of Tianlu Tongluo Granules and establish its quality standard.[Methods]Tianlu Tongluo Granules was prepared by an orthogonal test.TLC was used to identify Radix Astragali preparata,Radix Paeoniae Alba,Scutellariae Radix and Acori Tatarinowii Rhizoma in the granules,and the content of paeoniflorin in the finished product was determined by HPLC.[Results]The extraction process of Tianlu Tongluo Granules was as follows:adding 6 times of water,and decocting twice,1 h/time.In the forming process,the optimal ratio of thick paste to excipients as 10∶8.6,and the optimal ratio of excipients dextrin:starch:colloidal silicon dioxide was 6.5∶0.5∶1.6.The results showed that TLC spots were obvious,the separation was significant,and the specificity was strong.The paeoniflorin content had a good linear relationship in the concentration range of 5.9048-590.48 mg/L(r=0.9999).The average sample recovery was 101.10%,and the RSD was 1.18%.[Conclusions]The preparation process is stable and reasonable,and the established quality control method is specific and reproducible,and can be used for the quality control of Tianlu Tongluo Granules.展开更多
[ Objectivel The study aimed to discuss the preparation process of Epigallocatechin-3-gallate （EGCG） effervescent tablets. [ Method] Various raw materials were dried for different time at 50℃, and then the sticking...[ Objectivel The study aimed to discuss the preparation process of Epigallocatechin-3-gallate （EGCG） effervescent tablets. [ Method] Various raw materials were dried for different time at 50℃, and then the sticking degree of EGCG effervescent tablets was reviewed. Hereafter, the formula of EGCG effervescent tablets was optimized by orthogonal test. [ Result] Effervescent tablets without sticking were smooth after being dried for 150 rain. The optimal formula of EGCG effervescent tablets was composed of 4% EGCG, 45% citric acid and sodium carbonate （Citric acid： Sodium carbonate = 1.6：1 ）, 20% lactose, 4% L-leucine, 4% sodium cyclamate and 23% orange powder. [Condusion] The prepared EGCG effervescent tablets without sticking has a good effervescence effect and taste.展开更多
[Objectives] To establish the process flow of preparation of Wufang Babu Poultice and the identification method of thin layer chromatography (TLC). [Methods] For the forming process of Wufang Babu Poultice, the prepar...[Objectives] To establish the process flow of preparation of Wufang Babu Poultice and the identification method of thin layer chromatography (TLC). [Methods] For the forming process of Wufang Babu Poultice, the preparation method of mixed pharmaceutical powder with suitable pharmaceutical excipients was adopted. Qualitative identification of medicinal materials in Wufang Babu Poultice (Strychni Semen, Rhei Radix Et Rhizoma, Dipsaci Radix, and Angelicae Sinensis Radix) was carried out by TLC. [Results] Mixed pharmaceutical powder mixed with glycerol, gelatin and other pharmaceutical excipients can be prepared for forming. The test solution chromatography of each medicinal material (Strychni Semen, Rhei Radix et Rhizoma, Dipsaci Radix, Angelicae Sinensis Radix) showed pigment spots of the same color at the same position as its corresponding control medicinal materials and reference chromatography, and the display was clear. [Conclusions] The preparation process is simple and feasible, and can be used as the forming process of Wufang Babu Poultice. The TLC determination method is simple to operate, has good specificity, and has no effect on negative results, and can be used for identification of Wufang Babu Poultice.展开更多
[Objectives]To prepare plumbagin nanomicelle(PLB-N)in-situ gel,and optimize the formulation and process.[Methods]PLB-N was prepared by self-assembly method,and the optimal formulation of PLB-N in-situ gel was determin...[Objectives]To prepare plumbagin nanomicelle(PLB-N)in-situ gel,and optimize the formulation and process.[Methods]PLB-N was prepared by self-assembly method,and the optimal formulation of PLB-N in-situ gel was determined by orthogonal experiment design and single factor method.[Results]The optimal preparation process for PLB-N was a drug to lipid ratio of 1:3,a Tween 80 content of 5%,an ethanol content of 7.5%of the hydration medium,a magnetic stirring speed of 2200 rpm,a stirring time of 30 min,and an ultrasound time of 10 min.The optimal formulation of PLB-N in-situ gel was 22%of poloxamer 407,6%of poloxamer 188,and 1:1 of PLB-N to water.The encapsulation efficiency of PLB-N prepared with the optimal formula was(95.8%±0.4%),and the average particle size was(75.19±1.14)nm,and the Zeta potential was(-20.73±1.19)mv.[Conclusions]PLB-N in-situ gel had stable and reliable preparation process,uniform content,and broad application prospects.展开更多
With the acceleration of advanced industrialization and urbanization,the environment is deteriorating rapidly,and non-renewable energy resources are depleted.The gradual advent of potential clean energy storage techno...With the acceleration of advanced industrialization and urbanization,the environment is deteriorating rapidly,and non-renewable energy resources are depleted.The gradual advent of potential clean energy storage technologies is particularly urgent.Electrochemical energy storage technologies have been widely used in multiple fields,especially supercapacitors and rechargeable batteries,as vital elements of storing renewable energy.In recent years,two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties,large specific surface area,and tunability.Based on the layered materials of MXene,researchers have successfully achieved the dual functions of energy storage and conversion by adjusting the surface terminals at the Fermi level.It is worth noting that compared with other two-dimensional materials,MXene has more active sites on the basal plane,showing excellent catalytic performance.In contrast,other two-dimensional materials have catalytic activity only at the edge sites.This article comprehensively overviews the synthesis process,structural characteristics,modification methods for MXene-based polymer materials,and their applications in electrochemical energy storage.It also briefly discusses the potential of MXene-polymer materials in electromagnetic shielding technology and sensors and looks forward to future research directions.展开更多
[Objectives] To optimize the extraction process of Damp-clearing Mixture and establish the quality control indicators. [Methods] The extraction process of Coicis Semen Damp-clearing Mixture was optimized by L 9(3 4) o...[Objectives] To optimize the extraction process of Damp-clearing Mixture and establish the quality control indicators. [Methods] The extraction process of Coicis Semen Damp-clearing Mixture was optimized by L 9(3 4) orthogonal design with the content of total flavonoids and the dry yield rate as the evaluation indicators, and the amount of water, extraction time and extraction times as the factors, to determine the formation process of Coicis Semen Damp-clearing Mixture. In addition, the quality of the mixture was studied by thin layer chromatography (TLC). [Results] The optimal extraction process of Coicis Semen Damp-clearing Mixture was as follows: decocting twice, one hour each time, adding 8 times of water in the first time and 6 times of water in the second time, standing the extract in a cool place, adding 0.1% steviosin to facilitate the formation of the mixture;Acori Tatarinowii Rhizoma and Dendrophenol in the mixture were well separated by TLC with good reproducibility and specificity. [Conclusions] The preparation process and quality control indicators determined by the experiment are reasonable and feasible. It can provide a reference for the pilot production and quality standards of Coicis Semen Damp-clearing Mixture.展开更多
A new type of rice seedling carrier named seedling-growing bowl tray made of paddy straw(SGBTMPS)was developed in China.Traditional preparation process for SGBTMPS is complex and difficult to operate.Hence,a new SGBTM...A new type of rice seedling carrier named seedling-growing bowl tray made of paddy straw(SGBTMPS)was developed in China.Traditional preparation process for SGBTMPS is complex and difficult to operate.Hence,a new SGBTMPS preparation method has been developed by using straw powder as the main raw material.In this method,modified starch-based adhesive was replaced by the binder of thermosetting adhesive,and preparation constraints such as forming pressure,forming temperature,and dwell time were decreased.The effects of factors such as glue(modified starch-based adhesive),forming pressure,forming temperature and dwell time on SGBTMPS preparation were evaluated by single factor experiment.Orthogonal experiment and comprehensive weight analyses were adopted to optimize the parameters for SGBTMPS preparation.The results showed that optimized parameters were 125% glue and 1.2 kg mixed materials with the forming pressure,temperature,and dwell time of 30 MPa,140℃ and 330 seconds,respectively.Compared with traditional preparation process,the proportioning link,preparation link,and preparation time in the new preparation process were reduced by 66.7%,33.3%,and 17%,respectively;the pot-hole percentage and the expansion ratio were increased by 0.09% and 0.05%,respectively.This study indicated that the new preparation process for SGBTMPS was simpler and easier to operate and would provide a useful reference for further research and industrialization on SGBTMPS.展开更多
The free energy change for the reduction-diffusion reaction which was used to prepare the DyFe_2 D_y2 O_3(s) + 3Ca(g) + 4Fe(s) = 3C_aO(s) + 2D_yFe_2(s) intermetallic compound powder was calculated. The reduction-diffu...The free energy change for the reduction-diffusion reaction which was used to prepare the DyFe_2 D_y2 O_3(s) + 3Ca(g) + 4Fe(s) = 3C_aO(s) + 2D_yFe_2(s) intermetallic compound powder was calculated. The reduction-diffusion experiments were carried out at 1073, 1123. 1273 and 1373 K respectively using powders of D_y2O_3, iron, and calcium grains as raw materials. XRD and EDX analysis confirmed that D_yFe_2 was formed by the diffusion of Dy into Fe.展开更多
The predictive model and design of heavy-duty metal rubber shock absorber for the powertrains of heavy-load mining vehicles were investigated.The microstructural characteristics of the wire mesh were elucidated using ...The predictive model and design of heavy-duty metal rubber shock absorber for the powertrains of heavy-load mining vehicles were investigated.The microstructural characteristics of the wire mesh were elucidated using fractal graphs.A numerical model based on virtual fabrication technique was established to propose a design scheme for the wire mesh component.Four sets of wire mesh shock absorbers with various relative densities were prepared and a predictive model based on these relative densities was established through mechanical testing.To further enhance the predictive accuracy,a variable transposition fitting method was proposed to refine the model.Residual analysis was employed to quantitatively validate the results against those obtained from an experimental control group.The results show that the improved model exhibits higher predictive accuracy than the original model,with the determination coefficient(R^(2))of 0.9624.This study provides theoretical support for designing wire mesh shock absorbers with reduced testing requirements and enhanced design efficiency.展开更多
Two series of perovskite-type oxides with composition (La_(1-x))Sr_xFeO_3(x≤0.8)and La_(1-x)Sr_xFe_(1-y)Co_yO_3(x=0.2; y=0.2, 0.4)powder productions were synthesized by EDTA complexing sol-gel method. The products we...Two series of perovskite-type oxides with composition (La_(1-x))Sr_xFeO_3(x≤0.8)and La_(1-x)Sr_xFe_(1-y)Co_yO_3(x=0.2; y=0.2, 0.4)powder productions were synthesized by EDTA complexing sol-gel method. The products were characterized by XRD, TEM, SEM, BET method(N_2 adsorption)and laser granularity analysis for different synthesis conditions to obtain the optimum conditions for the preparation process. Single-phased, uniform perovskite-type oxides with small particle size were obtained by EDTA sol-gel process with high stability and repeatability, and the process temperature is much lower than that of solid state reaction method.展开更多
Nuclear energy is a low-carbon,safe,efficient,and sustainable clean energy.The new generation of nuclear energy systems operate in harsher environments under higher working temperatures and irradiation doses,while tra...Nuclear energy is a low-carbon,safe,efficient,and sustainable clean energy.The new generation of nuclear energy systems operate in harsher environments under higher working temperatures and irradiation doses,while traditional nuclear power materials cannot meet the requirements.The development of high-performance nuclear power materials is a key factor for promoting the development of nuclear energy.Oxide dispersion strengthened(ODS)steel contains a high number density of dispersed nano-oxides and defect sinks and exhibits excellent high temperature creep performance and irradiation swelling resistance.Therefore,ODS steel has been considered as one of the most promising candidate materials for fourth-generation nuclear fission reactor cladding tubes and nuclear fusion reactor blankets.The preparation process significantly influences microstructure of ODS steel.This paper reviews the development and perspective of several preparation processes of ODS steel,including the powder metallurgy process,improved powder metallurgy process,liquid metal forming process,hybrid process,and additive forging.This paper also summarizes and analyzes the relationship between microstructures and the preparation process.After comprehensive consideration,the powder metallurgy process is still the best preparation process for ODS steel.Combining the advantages and disadvantages of the above preparation processes,the trend applied additive forging for extreme manufacturing of large ODS steel components is discussed with the goal of providing a reference for the application and development of ODS steel in nuclear energy.展开更多
With the rapid development of asphalt pavement technology,it has attracted considerable attention to improving the durability of asphalt pavement.An effective action is to use modified asphalt with high performance an...With the rapid development of asphalt pavement technology,it has attracted considerable attention to improving the durability of asphalt pavement.An effective action is to use modified asphalt with high performance and durability.Polyurethane(PU)has been used in asphalt pavement engineering to enhance the durability and service life of asphalt pavement because of its excellent high-temperature performance,toughness,wear resistance,aging resistance and oil resistance.However,PU modified asphalt technology is still in the exploratory stage.The preparation,modification mechanism and working performances of PU modified asphalt need to be further clarified.Therefore,this paper summarized the research progress of PU modified asphalt and its mixture.The composition of PU modified asphalt was introduced.The addition methods of PU materials and preparation process parameters of the PU modified asphalt were determined.The modification mechanism of PU on asphalt was discussed.The effects of polyurethane on asphalt were analyzed and the road performances of its mixture were evaluated.Finally,the development tendency towards PU modified asphalt and its mixture were forecasted.展开更多
In order to study the effects of preparation process on the performance and microstructure of the materials, semi-metal friction materials doping rare earths were produced. Different influencing factors in preparation...In order to study the effects of preparation process on the performance and microstructure of the materials, semi-metal friction materials doping rare earths were produced. Different influencing factors in preparation processes (forming pressure, hot-pressing temperature, etc.) were investigated and the optimum technological parameters were selected. The results showed that preparation processes has correlation with the properties of the materials. The morphology of worn surface was observed by scanning electronic microscope, and the conclusion was drawn that wear mechanisms of the materials were mainly abrasive wear, adhesive wear and fatigue wear. Doping RE in the materials can improve the interfacial bonding among the components of semi-metal friction materials and make the structure of the materials more impact.展开更多
基金financially supported by the National Program of Foreign Experts of China(G2023026003L)the National Natural Science Foundation of China(52475347,52071165,51705151)+4 种基金China Postdoctoral Fund(2023M740475)sponsored by the Program for Science&Technology Innovation Talents in Universities of Henan Province,China(22HASTIT026)International Science and Technology Cooperation Project of Henan Province(242102521057),Chinasupported by the Program for the Top Young Talents of Henan Province,ChinaFrontier Exploration Project of Longmen Laboratory(LMQYTSKT016),China.
文摘Ni-based coating,a kind of surface material,is characterized by high hardness,outstanding wear resistance,and excellent corrosion resistance.Ni-based coatings doped with hard phases can improve the coating quality.This is an important topic in related fields.Compared with traditional Ni-based coatings,Ni-based coatings doped with a hard phase have stronger competitive advantages.Among these,Ni-based diamond composite coatings have superior performance.Hence,it has become a kind of excellent functional coating.We outline the current state of research on Ni-based diamond composite coatings.Advances in seven preparation processes for Ni-based diamond composite coatings were discussed.These processes mainly include brazing,electrodeposition,sintering,laser cladding,plasma spraying,supersonic laser deposition,and vacuum cladding.The latest studies on the interfacial behavior,microstructure,and bond strength of these composite coatings are also summarized.The deficiencies for present Ni-based diamond composite coatings are pointed out.Meanwhile,the developmental directions of related fields are envisioned.That could provide theoretical guidance and reference information for research and technological development in the near future.
基金Supported by Guangxi Key R&D Programme Project(GK AB21196057)National Old Pharmacist Inheritance Studio Construction Project.
文摘[Objectives] To establish the preparation process and quality standard of Rougan Huaxian ointment.[Methods] The L_(9)(3^(4)) orthogonal test was employed to optimize the preparation process by considering the multiplication of water addition, extraction time, and extraction frequency as influencing factors. The dry paste yield was utilized as the evaluation criterion, in conjunction with the actual production conditions. Thin layer chromatography was employed to identify Radix Astragali, Lycii Fructus, Herba Dendrobii, and Rhizoma Polygoni Cuspidati. Ethanol served as the solvent for the determination of ethanol-soluble extractives using the cold immersion method.[Results] The preparation process was conducted as follows: the specified quantity of medicinal materials was combined with water for extraction purposes, performed in two separate stages. In each stage, eight times the amount of water was added. The first extraction lasted for 1.5 h, while the second extraction was completed in 1.0 h. The resulting liquid was then concentrated into a thick paste with a relative density ranging from 1.25 to 1.30 at a temperature of 60 ℃. The thin-layer chromatography analysis of Radix Astragali, Lycii Fructus, Herba Dendrobii, and Rhizoma Polygoni Cuspidati demonstrated distinct spots, effective separation, and the absence of interference from negative samples. Additionally, the ethanol-soluble extractives yielded a minimum of 8.0% in terms of dry weight.[Conclusions] The preparation process for Rougan Huaxian ointment is both stable and feasible. Furthermore, the quality standards established for this preparation are unique and reproducible, thereby facilitating effective quality control.
基金funded by the Henan Province 2024 Science and Technology Development Plan Science and Technology Key Project(242102310577).
文摘Objective The objective of this study was to investigate the preparation process of Mahuang Xixin Fuzi decoction granules based on the clinical pharmacological effects of the classic formulas and to control the quality of the product.Methods An orthogonal experimental design was used,with extraction yield and transfer rate of key ingredients as evaluation indicators,to optimize the extraction process ofMahuang Xixin Fuzi decoction.The granulation process was optimized based on indicators such as granule formation rate,dissolution rate,and moisture absorption rate.Results The optimal extraction process for Mahuang Xixin Fuzi decoction was determined as the following:using 10 times the amount of water to soak for 30 minutes,extracting three times,each for 60minutes,with a concentrated extract relative density of 1.3 g/mL.A mixture of dextrin and starch at a 1:2 ratio was used as a binder for wet granulation.The granule formation rate,dissolution time,and dilution rate of three repeated batches showed relative standard deviation(RSD)values of 1.48,2.83,and 1.55%.Conclusion This method is stable and feasible,providing valuable data for the industrial production of Mahuang Xixin Fuzi decoction granules and further research on this formulation.
文摘Based on the analysis of the preparation of metal rubber （MR） and two pivotal hypotheses, the uniform distribution and the unaltered topological structure of wires in the radial direction of columns in the punch process, a 3D parametrical model was established based on four approaches： helix-making, planar roughcast-weaving, planar roughcast-rolling, and 3D roughcast punching. In the modeling process, 5 lattice types of weave patterns in planar roughcast were put forward, and 10 quantificational modeling parameters were picked up to exclusively define the column MR component structure. The wire distribution was visualized by CAD techniques. The important performance parameter of column MR components （relative density ρ^- ） can be forecasted by modeling computing, which provides the necessary foundation for the design and optimization of MR materials.
基金The National Basic Research Program of China(No.2012CB725405)the National Natural Science Foundation of China(No.51308115)+1 种基金the Science and Technology Demonstration Project of Ministry of Transport of China(No.2015364X16030)Fundamental Research Funds for the Central Universities,the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYLX15_0153)
文摘In order to increase the accuracy of microscopic traffic flow simulation,two acceleration models are presented to simulate car-following behaviors of the lane-changing vehicle and following putative vehicle during the discretionary lanechanging preparation( DLCP) process, respectively. The proposed acceleration models can reflect vehicle interaction characteristics. Samples used for describing the starting point and the ending point of DLCP are extracted from a real NGSIM vehicle trajectory data set. The acceleration model for a lanechanging vehicle is supposed to be a linear acceleration model.The acceleration model for the following putative vehicle is constructed by referring to the optimal velocity model,in which optimal velocity is defined as a linear function of the velocity of putative leading vehicle. Similar calibration,a hypothesis test and parameter sensitivity analysis were conducted on the acceleration model of the lane-changing vehicle and following putative vehicle,respectively. The validation results of the two proposed models suggest that the training and testing errors are acceptable compared with similar works on calibrations for car following models. The parameter sensitivity analysis shows that the subtle observed error does not lead to severe variations of car-following behaviors of the lane-changing vehicle and following putative vehicle.
基金Supported by Project of Guiyang Science and Technology Bureau(ZKHT[2020]-18-4).
文摘[Objectives]This study was conducted to optimize the preparation process of Tianlu Tongluo Granules and establish its quality standard.[Methods]Tianlu Tongluo Granules was prepared by an orthogonal test.TLC was used to identify Radix Astragali preparata,Radix Paeoniae Alba,Scutellariae Radix and Acori Tatarinowii Rhizoma in the granules,and the content of paeoniflorin in the finished product was determined by HPLC.[Results]The extraction process of Tianlu Tongluo Granules was as follows:adding 6 times of water,and decocting twice,1 h/time.In the forming process,the optimal ratio of thick paste to excipients as 10∶8.6,and the optimal ratio of excipients dextrin:starch:colloidal silicon dioxide was 6.5∶0.5∶1.6.The results showed that TLC spots were obvious,the separation was significant,and the specificity was strong.The paeoniflorin content had a good linear relationship in the concentration range of 5.9048-590.48 mg/L(r=0.9999).The average sample recovery was 101.10%,and the RSD was 1.18%.[Conclusions]The preparation process is stable and reasonable,and the established quality control method is specific and reproducible,and can be used for the quality control of Tianlu Tongluo Granules.
文摘[ Objectivel The study aimed to discuss the preparation process of Epigallocatechin-3-gallate （EGCG） effervescent tablets. [ Method] Various raw materials were dried for different time at 50℃, and then the sticking degree of EGCG effervescent tablets was reviewed. Hereafter, the formula of EGCG effervescent tablets was optimized by orthogonal test. [ Result] Effervescent tablets without sticking were smooth after being dried for 150 rain. The optimal formula of EGCG effervescent tablets was composed of 4% EGCG, 45% citric acid and sodium carbonate （Citric acid： Sodium carbonate = 1.6：1 ）, 20% lactose, 4% L-leucine, 4% sodium cyclamate and 23% orange powder. [Condusion] The prepared EGCG effervescent tablets without sticking has a good effervescence effect and taste.
基金Supported by Key R&D Plan of Guangxi Zhuang Autonomous Region(Guike AB20297010).
文摘[Objectives] To establish the process flow of preparation of Wufang Babu Poultice and the identification method of thin layer chromatography (TLC). [Methods] For the forming process of Wufang Babu Poultice, the preparation method of mixed pharmaceutical powder with suitable pharmaceutical excipients was adopted. Qualitative identification of medicinal materials in Wufang Babu Poultice (Strychni Semen, Rhei Radix Et Rhizoma, Dipsaci Radix, and Angelicae Sinensis Radix) was carried out by TLC. [Results] Mixed pharmaceutical powder mixed with glycerol, gelatin and other pharmaceutical excipients can be prepared for forming. The test solution chromatography of each medicinal material (Strychni Semen, Rhei Radix et Rhizoma, Dipsaci Radix, Angelicae Sinensis Radix) showed pigment spots of the same color at the same position as its corresponding control medicinal materials and reference chromatography, and the display was clear. [Conclusions] The preparation process is simple and feasible, and can be used as the forming process of Wufang Babu Poultice. The TLC determination method is simple to operate, has good specificity, and has no effect on negative results, and can be used for identification of Wufang Babu Poultice.
基金Supported by Special Fund for Basic Scientific Research Business in Central Universities(2019NYB31)Scientific Research Funded Project of Southwest Minzu University(2023KYZZ06N).
文摘[Objectives]To prepare plumbagin nanomicelle(PLB-N)in-situ gel,and optimize the formulation and process.[Methods]PLB-N was prepared by self-assembly method,and the optimal formulation of PLB-N in-situ gel was determined by orthogonal experiment design and single factor method.[Results]The optimal preparation process for PLB-N was a drug to lipid ratio of 1:3,a Tween 80 content of 5%,an ethanol content of 7.5%of the hydration medium,a magnetic stirring speed of 2200 rpm,a stirring time of 30 min,and an ultrasound time of 10 min.The optimal formulation of PLB-N in-situ gel was 22%of poloxamer 407,6%of poloxamer 188,and 1:1 of PLB-N to water.The encapsulation efficiency of PLB-N prepared with the optimal formula was(95.8%±0.4%),and the average particle size was(75.19±1.14)nm,and the Zeta potential was(-20.73±1.19)mv.[Conclusions]PLB-N in-situ gel had stable and reliable preparation process,uniform content,and broad application prospects.
基金supported by the Natural Science Basic Research Plan in the Shaanxi Province of China(No.2023-JC-ZD-25)Shaanxi Province(Qin ChuangYuan)“Scientist+Engineer”Team Building(No.2022KXJ-040)+1 种基金Shaanxi Provincial Department of Education Key Scientific Research Project(No.22JY024)Science and Technology Guidance Project Plan of China National Textile and Apparel Council(No.2022038,2023018).
文摘With the acceleration of advanced industrialization and urbanization,the environment is deteriorating rapidly,and non-renewable energy resources are depleted.The gradual advent of potential clean energy storage technologies is particularly urgent.Electrochemical energy storage technologies have been widely used in multiple fields,especially supercapacitors and rechargeable batteries,as vital elements of storing renewable energy.In recent years,two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties,large specific surface area,and tunability.Based on the layered materials of MXene,researchers have successfully achieved the dual functions of energy storage and conversion by adjusting the surface terminals at the Fermi level.It is worth noting that compared with other two-dimensional materials,MXene has more active sites on the basal plane,showing excellent catalytic performance.In contrast,other two-dimensional materials have catalytic activity only at the edge sites.This article comprehensively overviews the synthesis process,structural characteristics,modification methods for MXene-based polymer materials,and their applications in electrochemical energy storage.It also briefly discusses the potential of MXene-polymer materials in electromagnetic shielding technology and sensors and looks forward to future research directions.
基金Supported by Self-funded Research Project of Administration of Traditional Chinese Medicine of Guangxi Zhuang Autonomous Region(GXZYA20220142)Key R&D Project of Guangxi Science and Technology Department(Guike AB21196057).
文摘[Objectives] To optimize the extraction process of Damp-clearing Mixture and establish the quality control indicators. [Methods] The extraction process of Coicis Semen Damp-clearing Mixture was optimized by L 9(3 4) orthogonal design with the content of total flavonoids and the dry yield rate as the evaluation indicators, and the amount of water, extraction time and extraction times as the factors, to determine the formation process of Coicis Semen Damp-clearing Mixture. In addition, the quality of the mixture was studied by thin layer chromatography (TLC). [Results] The optimal extraction process of Coicis Semen Damp-clearing Mixture was as follows: decocting twice, one hour each time, adding 8 times of water in the first time and 6 times of water in the second time, standing the extract in a cool place, adding 0.1% steviosin to facilitate the formation of the mixture;Acori Tatarinowii Rhizoma and Dendrophenol in the mixture were well separated by TLC with good reproducibility and specificity. [Conclusions] The preparation process and quality control indicators determined by the experiment are reasonable and feasible. It can provide a reference for the pilot production and quality standards of Coicis Semen Damp-clearing Mixture.
基金the projects financially supported by National Agricultural Science and Technology Achievement Transformation Project(No.2009GB2B200101)2011 Specialized Research Fund for the Doctoral Program of Higher Education(No.20112305120003)+1 种基金2009 Specialized Research Fund for the Doctoral Program of Higher Education(No.20092305110002)Start-up Capital of Doctoral Research of Heilongjiang Bayi Agricultural University(No.2011YB-08).
文摘A new type of rice seedling carrier named seedling-growing bowl tray made of paddy straw(SGBTMPS)was developed in China.Traditional preparation process for SGBTMPS is complex and difficult to operate.Hence,a new SGBTMPS preparation method has been developed by using straw powder as the main raw material.In this method,modified starch-based adhesive was replaced by the binder of thermosetting adhesive,and preparation constraints such as forming pressure,forming temperature,and dwell time were decreased.The effects of factors such as glue(modified starch-based adhesive),forming pressure,forming temperature and dwell time on SGBTMPS preparation were evaluated by single factor experiment.Orthogonal experiment and comprehensive weight analyses were adopted to optimize the parameters for SGBTMPS preparation.The results showed that optimized parameters were 125% glue and 1.2 kg mixed materials with the forming pressure,temperature,and dwell time of 30 MPa,140℃ and 330 seconds,respectively.Compared with traditional preparation process,the proportioning link,preparation link,and preparation time in the new preparation process were reduced by 66.7%,33.3%,and 17%,respectively;the pot-hole percentage and the expansion ratio were increased by 0.09% and 0.05%,respectively.This study indicated that the new preparation process for SGBTMPS was simpler and easier to operate and would provide a useful reference for further research and industrialization on SGBTMPS.
基金National Key Laboratory of the institute of Metal Corrosion and Proteation,Chinese Academy of Sciences.
文摘The free energy change for the reduction-diffusion reaction which was used to prepare the DyFe_2 D_y2 O_3(s) + 3Ca(g) + 4Fe(s) = 3C_aO(s) + 2D_yFe_2(s) intermetallic compound powder was calculated. The reduction-diffusion experiments were carried out at 1073, 1123. 1273 and 1373 K respectively using powders of D_y2O_3, iron, and calcium grains as raw materials. XRD and EDX analysis confirmed that D_yFe_2 was formed by the diffusion of Dy into Fe.
基金National Natural Science Foundation of China(12262028)Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(NJYT22085)Inner Mongolia Autonomous Region Science and Technology Plan Project(2021GG0437)。
文摘The predictive model and design of heavy-duty metal rubber shock absorber for the powertrains of heavy-load mining vehicles were investigated.The microstructural characteristics of the wire mesh were elucidated using fractal graphs.A numerical model based on virtual fabrication technique was established to propose a design scheme for the wire mesh component.Four sets of wire mesh shock absorbers with various relative densities were prepared and a predictive model based on these relative densities was established through mechanical testing.To further enhance the predictive accuracy,a variable transposition fitting method was proposed to refine the model.Residual analysis was employed to quantitatively validate the results against those obtained from an experimental control group.The results show that the improved model exhibits higher predictive accuracy than the original model,with the determination coefficient(R^(2))of 0.9624.This study provides theoretical support for designing wire mesh shock absorbers with reduced testing requirements and enhanced design efficiency.
文摘Two series of perovskite-type oxides with composition (La_(1-x))Sr_xFeO_3(x≤0.8)and La_(1-x)Sr_xFe_(1-y)Co_yO_3(x=0.2; y=0.2, 0.4)powder productions were synthesized by EDTA complexing sol-gel method. The products were characterized by XRD, TEM, SEM, BET method(N_2 adsorption)and laser granularity analysis for different synthesis conditions to obtain the optimum conditions for the preparation process. Single-phased, uniform perovskite-type oxides with small particle size were obtained by EDTA sol-gel process with high stability and repeatability, and the process temperature is much lower than that of solid state reaction method.
基金supported by the National Key Research and Development Program[Grant No.2018YFA0702900]the National Natural Science Foundation of China[Grant No.51774265]+4 种基金the National Science and Technology Major Project of China[Grant No.2019ZX06004010]the Strategic Priority Research Program of the Chinese Academy of Sciences[Grant No.XDC04000000]Ling Chuang Research Project of China National Nuclear CorporationProgram of CAS Interdisciplinary Innovation TeamYouth Innovation Promotion Association,CAS。
文摘Nuclear energy is a low-carbon,safe,efficient,and sustainable clean energy.The new generation of nuclear energy systems operate in harsher environments under higher working temperatures and irradiation doses,while traditional nuclear power materials cannot meet the requirements.The development of high-performance nuclear power materials is a key factor for promoting the development of nuclear energy.Oxide dispersion strengthened(ODS)steel contains a high number density of dispersed nano-oxides and defect sinks and exhibits excellent high temperature creep performance and irradiation swelling resistance.Therefore,ODS steel has been considered as one of the most promising candidate materials for fourth-generation nuclear fission reactor cladding tubes and nuclear fusion reactor blankets.The preparation process significantly influences microstructure of ODS steel.This paper reviews the development and perspective of several preparation processes of ODS steel,including the powder metallurgy process,improved powder metallurgy process,liquid metal forming process,hybrid process,and additive forging.This paper also summarizes and analyzes the relationship between microstructures and the preparation process.After comprehensive consideration,the powder metallurgy process is still the best preparation process for ODS steel.Combining the advantages and disadvantages of the above preparation processes,the trend applied additive forging for extreme manufacturing of large ODS steel components is discussed with the goal of providing a reference for the application and development of ODS steel in nuclear energy.
基金supported by Innovation Capability Support Program of Shaanxi(2022TD-07).
文摘With the rapid development of asphalt pavement technology,it has attracted considerable attention to improving the durability of asphalt pavement.An effective action is to use modified asphalt with high performance and durability.Polyurethane(PU)has been used in asphalt pavement engineering to enhance the durability and service life of asphalt pavement because of its excellent high-temperature performance,toughness,wear resistance,aging resistance and oil resistance.However,PU modified asphalt technology is still in the exploratory stage.The preparation,modification mechanism and working performances of PU modified asphalt need to be further clarified.Therefore,this paper summarized the research progress of PU modified asphalt and its mixture.The composition of PU modified asphalt was introduced.The addition methods of PU materials and preparation process parameters of the PU modified asphalt were determined.The modification mechanism of PU on asphalt was discussed.The effects of polyurethane on asphalt were analyzed and the road performances of its mixture were evaluated.Finally,the development tendency towards PU modified asphalt and its mixture were forecasted.
文摘In order to study the effects of preparation process on the performance and microstructure of the materials, semi-metal friction materials doping rare earths were produced. Different influencing factors in preparation processes (forming pressure, hot-pressing temperature, etc.) were investigated and the optimum technological parameters were selected. The results showed that preparation processes has correlation with the properties of the materials. The morphology of worn surface was observed by scanning electronic microscope, and the conclusion was drawn that wear mechanisms of the materials were mainly abrasive wear, adhesive wear and fatigue wear. Doping RE in the materials can improve the interfacial bonding among the components of semi-metal friction materials and make the structure of the materials more impact.
