Cu nanoparticles exhibit excellent properties as high-temperature-resistant,conductive,heat-dissipating,and connecting materials.However,their susceptibility to oxidation poses a major challenge to the production of h...Cu nanoparticles exhibit excellent properties as high-temperature-resistant,conductive,heat-dissipating,and connecting materials.However,their susceptibility to oxidation poses a major challenge to the production of high-quality sintered bodies in the air,severely limiting their widespread adoption in power electronics packaging.This study presents a novel approach to the synthesis of Cu nanoparticles capped with oleylamine ligands.By employing a simple solvent-cleaning process,effective control of the density of oleylamine ligands on particle surfaces was achieved,resulting in high-performance Cu nanoparticles with both oxidation resistance and air-sintering susceptibility.Moreover,through our research,the solvent-cleaning mechanism was clarified,a model for the oleylamine ligand decomposition was developed,the air-sintering behavior of Cu nanoparticles was analyzed,and the impacts of both the sintered bodies and interfaces on the sintering performance were explained.Additionally,Cu nanoparticles subjected to 5 cleaning rounds followed by sintering at 280℃and 5 MPa in air were confirmed to be able to produce the highest shear strength(49.2±3.51 MPa)and lowest resistivity(6.15±0.32μΩ·cm).Based on these results,flexible capacitive pressure sensors with Cu sintered electrodes were fabricated and demonstrated a stable pressure-capacitance response over the temperature range of 25-250℃.These findings underscore the impressive robustness and durability of sintered structures and the potential for high-temperature applications of oleylamine-capped Cu nanoparticles.Our study provides reliable application demonstrations for the low-cost manufacture of high-performance power electronics packaging structures that can operate in high-current-density,high-heat-flow-density,high-temperature,and high-stress environments.展开更多
The present teaching content of the power electronics course is insufficient to cover the power electronics technology used in building electrical engineering.This paper analyzes the relationship between building elec...The present teaching content of the power electronics course is insufficient to cover the power electronics technology used in building electrical engineering.This paper analyzes the relationship between building electrical engineering and power electronics technology,investigates the main power electronics technology used in building electrical engineering,introduces the teaching content of current power electronics course,analyzes the insufficiency of current teaching content related to the practice of electrical engineering,and proposes the principles and directions for the reformation and innovation of the teaching content of the course of power electronics for the major of building electricity and intelligence.展开更多
Against the backdrop of global energy shortages and increasingly severe environmental pollution,renewable energy is gradually becoming a significant direction for future energy development.Power electronics converters...Against the backdrop of global energy shortages and increasingly severe environmental pollution,renewable energy is gradually becoming a significant direction for future energy development.Power electronics converters,as the core technology for energy conversion and control,play a crucial role in enhancing the efficiency and stability of renewable energy systems.This paper explores the basic principles and functions of power electronics converters and their specific applications in photovoltaic power generation,wind power generation,and energy storage systems.Additionally,it analyzes the current innovations in high-efficiency energy conversion,multilevel conversion technology,and the application of new materials and devices.By studying these technologies,the aim is to promote the widespread application of power electronics converters in renewable energy systems and provide theoretical and technical support for achieving sustainable energy development.展开更多
With the increasing demand for high power density,and to meet extreme working conditions,research has been focused on inves-tigating the performance of power electronics devices at cryogenic temperatures.The aim of th...With the increasing demand for high power density,and to meet extreme working conditions,research has been focused on inves-tigating the performance of power electronics devices at cryogenic temperatures.The aim of this paper is to review the performance of power semiconductor devices,passive components,gate drivers,sensors,and eventually power electronics converters at cryogenic temperatures.By comparing the physical properties of semiconductor materials and the electrical performance of commercial power semiconductor devices,silicon carbide switches show obvious disadvantages due to the increased on-resistance and switching time at cryogenic temperature.In contrast,silicon and gallium nitride devices exhibit improved performance when tem-perature is decreased.The performance ceiling of power semiconductor devices can be influenced by gate drivers,within which the commercial alternatives show deteriorated performance at cryogenic temperature compared to room temperature.Moreover,options for voltage and current sense in cryogenic environments are justified.Based on the cryogenic performance of the various components afore-discussed,this paper ends by presenting an overview of the published converter,which are either partially or fully tested in a cryogenic environment.展开更多
High performance can be obtained for the integrated power electronics module（IPEM） by using a three-dimensional packaging structure instead of a planar structure. A three- dimensional packaged half bridge-IPEM （HB-...High performance can be obtained for the integrated power electronics module（IPEM） by using a three-dimensional packaging structure instead of a planar structure. A three- dimensional packaged half bridge-IPEM （HB-IPEM）, consisting of two chip scale packaged MOSFETs and the corresponding gate driver and protection circuits, is fabricated at the laboratory. The reliability of the IPEM is controlled from the shape design of solder joints and the control of assembly process parameters. The parasitic parameters are extracted using Agilent 4395A impedance analyzer for building the parasitic parameter model of the HB- IPEM. A 12 V/3 A output synchronous rectifier Buck converter using the HB-IPEM is built to test the electrical performance of the HB-IPEM. Low voltage spikes on two MOSFETs illustrate that the three-dimensional package of the HB-IPEM can decrease parasitic inductance. Temperature distribution simulation results of the HB-IPEM using FLOTHERM are given. Heat dissipation of the solder joints makes the peak junction temperature of the chip drop obviously. The package realizes three-dimensional heat dissipation and has better thermal management.展开更多
Modeling and simulation have emerged as an indispensable approach to create numerical experiment platforms and study engineering systems.However,the increasingly complicated systems that engineers face today dramatica...Modeling and simulation have emerged as an indispensable approach to create numerical experiment platforms and study engineering systems.However,the increasingly complicated systems that engineers face today dramatically challenge state-of-the-art modeling and simulation approaches.Such complicated systems,which are composed of not only continuous states but also discrete events,and which contain complex dynamics across multiple timescales,are defined as generalized hybrid systems(GHSs)in this paper.As a representative GHS,megawatt power electronics(MPE)systems have been largely integrated into the modern power grid,but MPE simulation remains a bottleneck due to its unacceptable time cost and poor convergence.To address this challenge,this paper proposes the numerical convex lens approach to achieve state-discretized modeling and simulation of GHSs.This approach transforms conventional time-discretized passive simulations designed for pure-continuous systems into state-discretized selective simulations designed for GHSs.When this approach was applied to a largescale MPE-based renewable energy system,a 1000-fold increase in simulation speed was achieved,in comparison with existing software.Furthermore,the proposed approach uniquely enables the switching transient simulation of a largescale megawatt system with high accuracy,compared with experimental results,and with no convergence concerns.The numerical convex lens approach leads to the highly efficient simulation of intricate GHSs across multiple timescales,and thus significantly extends engineers’capability to study systems with numerical experiments.展开更多
The rapid pace of change in the wide band gap(WBG)power semiconductor area has led to an explosion in potential uses for WBG devices in a huge variety of applications.The applications include automotive,aerospace and ...The rapid pace of change in the wide band gap(WBG)power semiconductor area has led to an explosion in potential uses for WBG devices in a huge variety of applications.The applications include automotive,aerospace and traction applications,as well as grid related or charging systems,with the potential to provide paradigm shifts in performance and efficiency over Silicon devices in current use today.Despite these exciting developments,however,there are still many outstanding challenges for both researchers and industry to solve before WBG technology becomes pervasive.In this paper we will explore some of these challenges and highlight the strengths of WBG devices,some of the specific issues for machine drives and develop some potential solutions for future developments in power electronics.展开更多
Out of many renewable energy resources, solar energy is one of the conspicuous sources of energy which can supply the increasing demand of energy. As of May 2014, India has an installed PV capacity of 2.5 GW. The sola...Out of many renewable energy resources, solar energy is one of the conspicuous sources of energy which can supply the increasing demand of energy. As of May 2014, India has an installed PV capacity of 2.5 GW. The solar photovoltaic project includes power electronics with high quality performance devices, incorporated with smart energy management principles. Power electronics is used to improve the energy efficiency of apparatus, and help the generation of environmentally clean energy. In this article the explanation of role of power electronics and the discussion about similar and future concepts in solar photovoltaic systems related to reliability and advancement of each technology in India has been presented.展开更多
Power electronics is a new technology of power transmission and control.Compared with the traditional power transmission,non-contact power transmission has the advantages of low wear rate,safety,reliability,convenienc...Power electronics is a new technology of power transmission and control.Compared with the traditional power transmission,non-contact power transmission has the advantages of low wear rate,safety,reliability,convenience and flexibility.In this way,it avoids the problems of friction,wear,aging and so on in the traditional power supply mode,saves a lot of wires,makes up for the shortcomings of the traditional power transmission mode,and has a wider application range.Therefore,it is of great practical significance to study the key technology of power electronic information transmission for promoting the intelligent development of power transmission in China.展开更多
A new structure of integrated low-pass LC filter of DC-DC power converter is proposed in this paper. This filter consists in a circular planar coil enclosed between two ferrites substrates. Mn-Zn ferrite has been chos...A new structure of integrated low-pass LC filter of DC-DC power converter is proposed in this paper. This filter consists in a circular planar coil enclosed between two ferrites substrates. Mn-Zn ferrite has been chosen because of its high permeability and permittivity. In this filter Mn-Zn substrates act not only as a magnetic core but also as a capacitor. In order to reduce the conduction losses in the part of the ferrite used as a capacitor, a particular topology using a blocking layer is proposed. A modelling of the dielectric behaviour of the materials has been performed and injected in a simulation in order to find the resulting LC filter performances and its power range of use. In order to increase the filter efficiency, different solutions have been explored. In particular the inter-turn gap evolution has been optimized to reduce the inter-turn losses. Regarding the bulk losses, BaTiO3?blocking layers have?been added, either upon the ground or the conductor. In this last case a co-firing ferrite tape has been inserted between turns to increase the LC product. Finally the use of low losses Mn-Zn and BaTiO3?has been proposed and the final characteristics (both electrical and dimensional) of our filter have been compared toconventional ones.展开更多
In this paper power electronics used in PV power generation systems have been reviewed and modelled. PV systems need converters for maximum power point tracking, power conditioning, voltage step-up/down as necessary, ...In this paper power electronics used in PV power generation systems have been reviewed and modelled. PV systems need converters for maximum power point tracking, power conditioning, voltage step-up/down as necessary, and for storage charge-controlling. Inverters are needed for AC loads and for utility grid interfacing. The four basic DC-DC converters commonly used with PV systems have been reviewed and modelled. Different DC-AC inverter types and operational architectures have also been reviewed with the two-stage DC-AC inverter, with the point of common coupling (PCC) at the inverter input, suggested as the most cost-effective and efficient architecture for PV-based communal grids. This is because only one inverter is used for the entire system as opposed to an inverter for every module string, resulting in higher efficiencies, low cost, and low harmonic distortions when compared to systems with PCC at AC terminal. The aim of power conversion/inversion is to extract maximum power possible from the PV system and where necessary, to invert it at close to 100% as possible. Highlight: 1) DC-DC converters are necessary for power conditioning in PV systems;2) DC-AC inverters are necessary for AC loads and for utility grid interfacing;3) DC-AC inverters are also used to control the PV systems when grid connected;4) Best inverter configuration cost-effectively and efficiently allows easy system modifications.展开更多
Abstract： This paper presents results from an on-going research project on pressure tolerant power electronics at SINTEF Energy Research, Norway. The driving force for this research is to enable power electronic comp...Abstract： This paper presents results from an on-going research project on pressure tolerant power electronics at SINTEF Energy Research, Norway. The driving force for this research is to enable power electronic components to operate in pressurized dielectric environment. The intended application is the converters for operation down to 3,000 meters ocean depth, primarily for subsea oil and gas processing. The paper focuses on the needed modifications to a general purpose gate driver for IGBT （insulated gate bipolar transistors） that will give pressure tolerance. Adaptations and modifications of the individual driver components are presented.The results from preliminary testing are promising, which shows that the considered adaptations give feasible solutions.展开更多
In the analysis of power electronics system,it is necessary to simulate ordinary differential equations(ODEs)with discontinuities and stiffness.However,there are many difficulties in using traditional discrete-time al...In the analysis of power electronics system,it is necessary to simulate ordinary differential equations(ODEs)with discontinuities and stiffness.However,there are many difficulties in using traditional discrete-time algorithms to solve such equations.Kofman and others presented the quantized state systems(QSS)algorithm in the discrete event system specification(DEVS)formalism.The discretization is applied to the state variables instead of time range in QSS.QSS is efficient to solve ODEs,but it is difficulty to be used when simulating actual power electronics systems with controller’s and other events.Based on the idea of this numerical algorithm and discrete event,a Discrete State Event Driven(DSED)simulation method is presented in this paper,which is fit for simulation of power electronics system.The method is developed to deal with non-linearity,stiffness and multi-time scale of power electronics systems.The DSED simulation method includes event definition,module seperation and modeling,event-driven mechanisms,numerical computation based on QSS,and some other operations.Simulation results verified the effectiveness and validity of the proposed method.展开更多
The heat losses density in power electronics products follows an ever increasing trend. Nowadays they reach 200 W/cmz at chip level and 50 W/cm2 at heatsink base level. Water cooling is the most effective cooling meth...The heat losses density in power electronics products follows an ever increasing trend. Nowadays they reach 200 W/cmz at chip level and 50 W/cm2 at heatsink base level. Water cooling is the most effective cooling method but unfortunately water is often undesired due to high voltages or costumer requirements. Two-phase cooling is a promising technology for electronics cooling. It allows using dielectric fluids in passive systems and still benefits from very high heat transfer coefficients. Thermosyphons are a particularly interesting technology in the field of power electronics because it is entirely passive and a simple equipment. ABB has developed a compact thermosyphon heat exchanger based on automotive technology, which uses numerous multi-port extruded tubes with capillary sized channels disposed in parallel and brazed to a heated base plate in order to achieve the desired compactness. The experimental performances of this novel power electronics cooling system are presented with R134a as a working fluid. The influence of several parameters on the performances was studied experimentally： coolant flow rate, coolant temperature, heat load and fluid filling.展开更多
Due to the impact of the novel coronavirus outbreak,universities have adopted online teaching and carried out remote teaching.With the improvement of the epidemic and the approaching of the new school year,the organic...Due to the impact of the novel coronavirus outbreak,universities have adopted online teaching and carried out remote teaching.With the improvement of the epidemic and the approaching of the new school year,the organic connection between online teaching during the epidemic and offline course construction after the epidemic is not only a challenge for tertiary education teachers,but also an urgent issue to be addressed.Therefore,the power electronics course is taken as an example to explore this connection.展开更多
Today, new applications of power electronics systems appear in many domains like transport: more electric aircrafts or electric cars. In order to combine power and electronic systems in the same environment or to take...Today, new applications of power electronics systems appear in many domains like transport: more electric aircrafts or electric cars. In order to combine power and electronic systems in the same environment or to take into account norma- tive constraints in term of electromagnetic field exposure for humans, electromagnetic compatibility (EMC) has to be integrated early in the design flow of the complete system (aircraft or car). The shielding is one of the most used solu- tions to avoid unwanted couplings between power systems and their environment. This paper presents a new experi- mental solution to determine the shielding efficiency of new material (composite material or association of different materials) in the frequency range of power electronic systems.展开更多
Power electronics technology plays a pivotal role in the advancement and modernization of smart grids by enabling efficient energy conversion,management,and control.This paper presents a comprehensive overview of key ...Power electronics technology plays a pivotal role in the advancement and modernization of smart grids by enabling efficient energy conversion,management,and control.This paper presents a comprehensive overview of key technologies underpinning power electronics systems,with particular emphasis on wide-bandgap(WBG)semiconductor devices such as silicon carbide(SiC)and gallium nitride(GaN).These devices offer superior electrical and thermal properties that overcome the limitations of traditional silicon-based components,facilitating higher efficiency,power density,and operational reliability.The paper further explores advanced power conversion topologies,high-performance drive and control strategies,and electromagnetic compatibility techniques critical to optimizing system performance.Core applications in renewable energy integration,energy storage management,intelligent transmission and distribution,microgrids,and electric vehicle infrastructure are discussed.Additionally,multi-level control architectures,adaptive predictive control methods,and communication technologies that enhance system stability and security are examined.Finally,challenges related to reliability,large-scale coordination,emerging technology integration,and sustainable development are analyzed to identify future research directions.This work contributes to the ongoing evolution of power electronics as a fundamental enabler of resilient,efficient,and sustainable smart grids.展开更多
Wide-bandgap(WBG)semiconductor devices based on silicon carbide(SiC)and gallium nitride(GaN)have emerged as transformative technologies in power electronics,offering significant advantages over traditional silicon dev...Wide-bandgap(WBG)semiconductor devices based on silicon carbide(SiC)and gallium nitride(GaN)have emerged as transformative technologies in power electronics,offering significant advantages over traditional silicon devices in terms of efficiency,power density,and thermal performance.This paper provides a comprehensive review of the fundamental material properties,fabrication processes,and key device architectures underpinning WBG technology.We analyze the application of SiC and GaN devices across a range of power electronic systems including inverters,DC-DC converters,motor drives,and grid equipment,highlighting their impact on system efficiency and size reduction.Performance optimization techniques,thermal management strategies,and reliability challenges are discussed in depth to provide insight into current technological limitations and future directions.Furthermore,we explore advanced drive circuits,control algorithms,and system integration methodologies tailored to exploit the fast switching capabilities of WBG devices while ensuring electromagnetic compatibility.This work aims to elucidate the critical role of WBG semiconductors in enabling the next generation of high-efficiency,compact,and robust power electronic systems,thereby facilitating broader adoption in emerging applications such as electric vehicles,renewable energy,and smart grids.展开更多
New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed s...New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.展开更多
基金supported by the Natural Science Foundation of Fujian Province(No.2022J01044)the Digital Twin and Intelligent Transportation Maintenance Engineering Research Centre of Genting Applied Technology R&D Platform at Xiamen City University.
文摘Cu nanoparticles exhibit excellent properties as high-temperature-resistant,conductive,heat-dissipating,and connecting materials.However,their susceptibility to oxidation poses a major challenge to the production of high-quality sintered bodies in the air,severely limiting their widespread adoption in power electronics packaging.This study presents a novel approach to the synthesis of Cu nanoparticles capped with oleylamine ligands.By employing a simple solvent-cleaning process,effective control of the density of oleylamine ligands on particle surfaces was achieved,resulting in high-performance Cu nanoparticles with both oxidation resistance and air-sintering susceptibility.Moreover,through our research,the solvent-cleaning mechanism was clarified,a model for the oleylamine ligand decomposition was developed,the air-sintering behavior of Cu nanoparticles was analyzed,and the impacts of both the sintered bodies and interfaces on the sintering performance were explained.Additionally,Cu nanoparticles subjected to 5 cleaning rounds followed by sintering at 280℃and 5 MPa in air were confirmed to be able to produce the highest shear strength(49.2±3.51 MPa)and lowest resistivity(6.15±0.32μΩ·cm).Based on these results,flexible capacitive pressure sensors with Cu sintered electrodes were fabricated and demonstrated a stable pressure-capacitance response over the temperature range of 25-250℃.These findings underscore the impressive robustness and durability of sintered structures and the potential for high-temperature applications of oleylamine-capped Cu nanoparticles.Our study provides reliable application demonstrations for the low-cost manufacture of high-performance power electronics packaging structures that can operate in high-current-density,high-heat-flow-density,high-temperature,and high-stress environments.
基金Cloud Course of Beijing University of Civil Engineering and Architecture at Super Star Learning(YC240109)。
文摘The present teaching content of the power electronics course is insufficient to cover the power electronics technology used in building electrical engineering.This paper analyzes the relationship between building electrical engineering and power electronics technology,investigates the main power electronics technology used in building electrical engineering,introduces the teaching content of current power electronics course,analyzes the insufficiency of current teaching content related to the practice of electrical engineering,and proposes the principles and directions for the reformation and innovation of the teaching content of the course of power electronics for the major of building electricity and intelligence.
文摘Against the backdrop of global energy shortages and increasingly severe environmental pollution,renewable energy is gradually becoming a significant direction for future energy development.Power electronics converters,as the core technology for energy conversion and control,play a crucial role in enhancing the efficiency and stability of renewable energy systems.This paper explores the basic principles and functions of power electronics converters and their specific applications in photovoltaic power generation,wind power generation,and energy storage systems.Additionally,it analyzes the current innovations in high-efficiency energy conversion,multilevel conversion technology,and the application of new materials and devices.By studying these technologies,the aim is to promote the widespread application of power electronics converters in renewable energy systems and provide theoretical and technical support for achieving sustainable energy development.
文摘With the increasing demand for high power density,and to meet extreme working conditions,research has been focused on inves-tigating the performance of power electronics devices at cryogenic temperatures.The aim of this paper is to review the performance of power semiconductor devices,passive components,gate drivers,sensors,and eventually power electronics converters at cryogenic temperatures.By comparing the physical properties of semiconductor materials and the electrical performance of commercial power semiconductor devices,silicon carbide switches show obvious disadvantages due to the increased on-resistance and switching time at cryogenic temperature.In contrast,silicon and gallium nitride devices exhibit improved performance when tem-perature is decreased.The performance ceiling of power semiconductor devices can be influenced by gate drivers,within which the commercial alternatives show deteriorated performance at cryogenic temperature compared to room temperature.Moreover,options for voltage and current sense in cryogenic environments are justified.Based on the cryogenic performance of the various components afore-discussed,this paper ends by presenting an overview of the published converter,which are either partially or fully tested in a cryogenic environment.
基金Fok Ying Tung Education Foundation(No.91058)the Natural Science Foundation of High Education Institutions of Jiangsu Province(No.08KJD470004)Qing Lan Project of Jiangsu Province of 2008
文摘High performance can be obtained for the integrated power electronics module（IPEM） by using a three-dimensional packaging structure instead of a planar structure. A three- dimensional packaged half bridge-IPEM （HB-IPEM）, consisting of two chip scale packaged MOSFETs and the corresponding gate driver and protection circuits, is fabricated at the laboratory. The reliability of the IPEM is controlled from the shape design of solder joints and the control of assembly process parameters. The parasitic parameters are extracted using Agilent 4395A impedance analyzer for building the parasitic parameter model of the HB- IPEM. A 12 V/3 A output synchronous rectifier Buck converter using the HB-IPEM is built to test the electrical performance of the HB-IPEM. Low voltage spikes on two MOSFETs illustrate that the three-dimensional package of the HB-IPEM can decrease parasitic inductance. Temperature distribution simulation results of the HB-IPEM using FLOTHERM are given. Heat dissipation of the solder joints makes the peak junction temperature of the chip drop obviously. The package realizes three-dimensional heat dissipation and has better thermal management.
基金the Major Program of National Natural Science Foundation of China(51490683).
文摘Modeling and simulation have emerged as an indispensable approach to create numerical experiment platforms and study engineering systems.However,the increasingly complicated systems that engineers face today dramatically challenge state-of-the-art modeling and simulation approaches.Such complicated systems,which are composed of not only continuous states but also discrete events,and which contain complex dynamics across multiple timescales,are defined as generalized hybrid systems(GHSs)in this paper.As a representative GHS,megawatt power electronics(MPE)systems have been largely integrated into the modern power grid,but MPE simulation remains a bottleneck due to its unacceptable time cost and poor convergence.To address this challenge,this paper proposes the numerical convex lens approach to achieve state-discretized modeling and simulation of GHSs.This approach transforms conventional time-discretized passive simulations designed for pure-continuous systems into state-discretized selective simulations designed for GHSs.When this approach was applied to a largescale MPE-based renewable energy system,a 1000-fold increase in simulation speed was achieved,in comparison with existing software.Furthermore,the proposed approach uniquely enables the switching transient simulation of a largescale megawatt system with high accuracy,compared with experimental results,and with no convergence concerns.The numerical convex lens approach leads to the highly efficient simulation of intricate GHSs across multiple timescales,and thus significantly extends engineers’capability to study systems with numerical experiments.
文摘The rapid pace of change in the wide band gap(WBG)power semiconductor area has led to an explosion in potential uses for WBG devices in a huge variety of applications.The applications include automotive,aerospace and traction applications,as well as grid related or charging systems,with the potential to provide paradigm shifts in performance and efficiency over Silicon devices in current use today.Despite these exciting developments,however,there are still many outstanding challenges for both researchers and industry to solve before WBG technology becomes pervasive.In this paper we will explore some of these challenges and highlight the strengths of WBG devices,some of the specific issues for machine drives and develop some potential solutions for future developments in power electronics.
文摘Out of many renewable energy resources, solar energy is one of the conspicuous sources of energy which can supply the increasing demand of energy. As of May 2014, India has an installed PV capacity of 2.5 GW. The solar photovoltaic project includes power electronics with high quality performance devices, incorporated with smart energy management principles. Power electronics is used to improve the energy efficiency of apparatus, and help the generation of environmentally clean energy. In this article the explanation of role of power electronics and the discussion about similar and future concepts in solar photovoltaic systems related to reliability and advancement of each technology in India has been presented.
文摘Power electronics is a new technology of power transmission and control.Compared with the traditional power transmission,non-contact power transmission has the advantages of low wear rate,safety,reliability,convenience and flexibility.In this way,it avoids the problems of friction,wear,aging and so on in the traditional power supply mode,saves a lot of wires,makes up for the shortcomings of the traditional power transmission mode,and has a wider application range.Therefore,it is of great practical significance to study the key technology of power electronic information transmission for promoting the intelligent development of power transmission in China.
文摘A new structure of integrated low-pass LC filter of DC-DC power converter is proposed in this paper. This filter consists in a circular planar coil enclosed between two ferrites substrates. Mn-Zn ferrite has been chosen because of its high permeability and permittivity. In this filter Mn-Zn substrates act not only as a magnetic core but also as a capacitor. In order to reduce the conduction losses in the part of the ferrite used as a capacitor, a particular topology using a blocking layer is proposed. A modelling of the dielectric behaviour of the materials has been performed and injected in a simulation in order to find the resulting LC filter performances and its power range of use. In order to increase the filter efficiency, different solutions have been explored. In particular the inter-turn gap evolution has been optimized to reduce the inter-turn losses. Regarding the bulk losses, BaTiO3?blocking layers have?been added, either upon the ground or the conductor. In this last case a co-firing ferrite tape has been inserted between turns to increase the LC product. Finally the use of low losses Mn-Zn and BaTiO3?has been proposed and the final characteristics (both electrical and dimensional) of our filter have been compared toconventional ones.
文摘In this paper power electronics used in PV power generation systems have been reviewed and modelled. PV systems need converters for maximum power point tracking, power conditioning, voltage step-up/down as necessary, and for storage charge-controlling. Inverters are needed for AC loads and for utility grid interfacing. The four basic DC-DC converters commonly used with PV systems have been reviewed and modelled. Different DC-AC inverter types and operational architectures have also been reviewed with the two-stage DC-AC inverter, with the point of common coupling (PCC) at the inverter input, suggested as the most cost-effective and efficient architecture for PV-based communal grids. This is because only one inverter is used for the entire system as opposed to an inverter for every module string, resulting in higher efficiencies, low cost, and low harmonic distortions when compared to systems with PCC at AC terminal. The aim of power conversion/inversion is to extract maximum power possible from the PV system and where necessary, to invert it at close to 100% as possible. Highlight: 1) DC-DC converters are necessary for power conditioning in PV systems;2) DC-AC inverters are necessary for AC loads and for utility grid interfacing;3) DC-AC inverters are also used to control the PV systems when grid connected;4) Best inverter configuration cost-effectively and efficiently allows easy system modifications.
文摘Abstract： This paper presents results from an on-going research project on pressure tolerant power electronics at SINTEF Energy Research, Norway. The driving force for this research is to enable power electronic components to operate in pressurized dielectric environment. The intended application is the converters for operation down to 3,000 meters ocean depth, primarily for subsea oil and gas processing. The paper focuses on the needed modifications to a general purpose gate driver for IGBT （insulated gate bipolar transistors） that will give pressure tolerance. Adaptations and modifications of the individual driver components are presented.The results from preliminary testing are promising, which shows that the considered adaptations give feasible solutions.
基金This work was supported by a grant from the National Nature Science Foundation of China(No 51490680,No 51490683)。
文摘In the analysis of power electronics system,it is necessary to simulate ordinary differential equations(ODEs)with discontinuities and stiffness.However,there are many difficulties in using traditional discrete-time algorithms to solve such equations.Kofman and others presented the quantized state systems(QSS)algorithm in the discrete event system specification(DEVS)formalism.The discretization is applied to the state variables instead of time range in QSS.QSS is efficient to solve ODEs,but it is difficulty to be used when simulating actual power electronics systems with controller’s and other events.Based on the idea of this numerical algorithm and discrete event,a Discrete State Event Driven(DSED)simulation method is presented in this paper,which is fit for simulation of power electronics system.The method is developed to deal with non-linearity,stiffness and multi-time scale of power electronics systems.The DSED simulation method includes event definition,module seperation and modeling,event-driven mechanisms,numerical computation based on QSS,and some other operations.Simulation results verified the effectiveness and validity of the proposed method.
文摘The heat losses density in power electronics products follows an ever increasing trend. Nowadays they reach 200 W/cmz at chip level and 50 W/cm2 at heatsink base level. Water cooling is the most effective cooling method but unfortunately water is often undesired due to high voltages or costumer requirements. Two-phase cooling is a promising technology for electronics cooling. It allows using dielectric fluids in passive systems and still benefits from very high heat transfer coefficients. Thermosyphons are a particularly interesting technology in the field of power electronics because it is entirely passive and a simple equipment. ABB has developed a compact thermosyphon heat exchanger based on automotive technology, which uses numerous multi-port extruded tubes with capillary sized channels disposed in parallel and brazed to a heated base plate in order to achieve the desired compactness. The experimental performances of this novel power electronics cooling system are presented with R134a as a working fluid. The influence of several parameters on the performances was studied experimentally： coolant flow rate, coolant temperature, heat load and fluid filling.
基金the Research and Practice of“Power Electronics Technology”Online Course Construction(kczx202007)the Research of“Power Electronics Technology”Course Blended Teaching Reform(2020yb06)Oriented to the New Engineering Discipline by Higher-Order Learning,which is a university-level project of Qilu University of Technology(Shandong Academy of Sciences).
文摘Due to the impact of the novel coronavirus outbreak,universities have adopted online teaching and carried out remote teaching.With the improvement of the epidemic and the approaching of the new school year,the organic connection between online teaching during the epidemic and offline course construction after the epidemic is not only a challenge for tertiary education teachers,but also an urgent issue to be addressed.Therefore,the power electronics course is taken as an example to explore this connection.
文摘Today, new applications of power electronics systems appear in many domains like transport: more electric aircrafts or electric cars. In order to combine power and electronic systems in the same environment or to take into account norma- tive constraints in term of electromagnetic field exposure for humans, electromagnetic compatibility (EMC) has to be integrated early in the design flow of the complete system (aircraft or car). The shielding is one of the most used solu- tions to avoid unwanted couplings between power systems and their environment. This paper presents a new experi- mental solution to determine the shielding efficiency of new material (composite material or association of different materials) in the frequency range of power electronic systems.
文摘Power electronics technology plays a pivotal role in the advancement and modernization of smart grids by enabling efficient energy conversion,management,and control.This paper presents a comprehensive overview of key technologies underpinning power electronics systems,with particular emphasis on wide-bandgap(WBG)semiconductor devices such as silicon carbide(SiC)and gallium nitride(GaN).These devices offer superior electrical and thermal properties that overcome the limitations of traditional silicon-based components,facilitating higher efficiency,power density,and operational reliability.The paper further explores advanced power conversion topologies,high-performance drive and control strategies,and electromagnetic compatibility techniques critical to optimizing system performance.Core applications in renewable energy integration,energy storage management,intelligent transmission and distribution,microgrids,and electric vehicle infrastructure are discussed.Additionally,multi-level control architectures,adaptive predictive control methods,and communication technologies that enhance system stability and security are examined.Finally,challenges related to reliability,large-scale coordination,emerging technology integration,and sustainable development are analyzed to identify future research directions.This work contributes to the ongoing evolution of power electronics as a fundamental enabler of resilient,efficient,and sustainable smart grids.
文摘Wide-bandgap(WBG)semiconductor devices based on silicon carbide(SiC)and gallium nitride(GaN)have emerged as transformative technologies in power electronics,offering significant advantages over traditional silicon devices in terms of efficiency,power density,and thermal performance.This paper provides a comprehensive review of the fundamental material properties,fabrication processes,and key device architectures underpinning WBG technology.We analyze the application of SiC and GaN devices across a range of power electronic systems including inverters,DC-DC converters,motor drives,and grid equipment,highlighting their impact on system efficiency and size reduction.Performance optimization techniques,thermal management strategies,and reliability challenges are discussed in depth to provide insight into current technological limitations and future directions.Furthermore,we explore advanced drive circuits,control algorithms,and system integration methodologies tailored to exploit the fast switching capabilities of WBG devices while ensuring electromagnetic compatibility.This work aims to elucidate the critical role of WBG semiconductors in enabling the next generation of high-efficiency,compact,and robust power electronic systems,thereby facilitating broader adoption in emerging applications such as electric vehicles,renewable energy,and smart grids.
基金supported by the science and technology project of State Grid Shanghai Municipal Electric Power Company(No.52094023003L).
文摘New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.
