Utilizing Si, Fe and Mn concentrations within the end-member PACMANUS hydrothermal fluid, Si-Fe-Mn-H2O Pourbaix diagrams were constructed at 300℃and 25℃. ThePourbaix diagrams show that the main Si, Fe and Mn oxides ...Utilizing Si, Fe and Mn concentrations within the end-member PACMANUS hydrothermal fluid, Si-Fe-Mn-H2O Pourbaix diagrams were constructed at 300℃and 25℃. ThePourbaix diagrams show that the main Si, Fe and Mn oxides species precipitating from the hydrothermal fluid were SiO2, Fe（OH）3, Fe3（OH）8, Mn3O4, and Mn2O3at 25℃. During mixing of hydrothermal fluid with seawater, SiO2 precipitated earlier than Fe-Mn-oxyhydroxides because of the lower stability boundary. Then Fe（OH）2 precipitated first, followed by Fe3（OH）8 and Fe（OH）3, and last, small amounts of Mn3O4 and Mn2O3 precipitated. Fe（OH）3was readily de-posited in alkaline solution with little influence by Eh. There were many Si-Fe-Mn-concentric particles in the polished sections of the massive precipitates collected from PACMANUS. In the concentric nucleus and ellipsoid, Si oxides precipitated first before the hydrothermal fluid had mixed with seawater. In the concen-tric nucleus, after the precipitation of Si oxides, the increase of pH and Eh promoted the precipitation of Mn oxides around the Si oxides. In the large ellipsoid, the precipitation of Fe was divided into two periods. In the early period, increase of pH value of hydrothermal fluid produced by low-temperature convection and an input of a small volume of seawater promoted a small amount of Fe（OH）3 to precipitate in the Si-rich core. In the late period, after complete mixing with seawater and the resultant fluid was close to neutral or slightly alkaline in pH, Fe（OH）3was easily precipitated from the solution and distributed around the Si-rich core.展开更多
Aldehydes are valuable intermediates with widespread industrial applications,and their traditional synthesis relies on chemical oxidation that is often hazardous and environmentally unfriendly.Electrochemical oxidatio...Aldehydes are valuable intermediates with widespread industrial applications,and their traditional synthesis relies on chemical oxidation that is often hazardous and environmentally unfriendly.Electrochemical oxidation offers a more sustainable and milder alternative;however,it faces challenges such as aldehyde overoxidation and susceptibility to base-catalyzed Cannizzaro disproportionation.Electrochemical glycerol oxidation to glyceraldehyde is a representative example,which typically requires precious metal-based electrocatalysts but still suffers from low selectivity and activity.Here,we report a metal-free oxidation strategy mediated by 2,2,6,6-tetramethylpiperidine-1-oxyl.By systematically investigating the redox thermodynamics and kinetics of TEMPO across a broad pH range,we construct a Pourbaix diagram and elucidate the relative kinetics of each reaction step.These insights allow us to explain the anomalously high apparent Faradaic efficiency(~200%)observed under acidic conditions,and identify neutral media as the optimal environment for selective glyceraldehyde production.Under optimized conditions,our system achieves a glyceraldehyde Faradaic efficiency exceeding 93%and a partial current density of 23.3 mA cm^(-2)at 0.57 V—more than doubling the performance of the best reported precious metal-based systems.Furthermore,the versatility of this strategy extends to the selective oxidation of other primary alcohols to their corresponding aldehydes with near-unity selectivity.展开更多
This work investigated the chemical and electrochemical mechanisms of localised corrosion triggered by CaS·xMgO·y Al_(2)O_(3)·TiN complex inclusions in high strength low alloy steel(HSLAS)under a simula...This work investigated the chemical and electrochemical mechanisms of localised corrosion triggered by CaS·xMgO·y Al_(2)O_(3)·TiN complex inclusions in high strength low alloy steel(HSLAS)under a simulated marine environment.Special focus was given to the role of the TiN portion of the inclusion on the initiation and growth of the corrosion pits.The thermodynamic process of pitting initiation was investigated by Gibbs free energy,Pourbaix diagram and first principle calculation.Localised corrosion is mainly induced by inclusions and triggered by dissolution of adjacent distorted matrix.Chemical dissolution of CaS portion in CaS·xMgO·y Al_(2)O_(3)·TiN complex inclusion creates an acidic aggressive environment that accelerates the further dissolution of inclusion and matrix.Galvanic coupling effect between TiN inclusion and matrix is directly verified.TiN covered with a TiOfilm acts as the cathodic phase in galvanic corrosion,although it has a lower Volta potential than the matrix.This is an unusual correlation with the scanning Kelvin probe force microscopy result,which has been explained for this special system.展开更多
Pourbaix diagrams are calculated to describe electrochemical processes for alloys in aqueous solution.With the multi-component differentiation of alloy systems,the construction of Pourbaix diagrams is fac-ing challeng...Pourbaix diagrams are calculated to describe electrochemical processes for alloys in aqueous solution.With the multi-component differentiation of alloy systems,the construction of Pourbaix diagrams is fac-ing challenges,especially for non-single-phase alloy systems.In this study,the simultaneous construction of phase diagrams and Pourbaix diagrams were implemented for predicting the evolution of the phases in the immune and passive regions.The CALPHAD(CALculation of PHAse Diagram)approach was used to quickly access the Gibbs free energies of various phases and the chemical potential of the elements in the phases from the thermodynamic database of the Ni-Si-Al-Y system.The corrosion behavior of two typical Ni-Al-Si and Ni-Al-Y systems was investigated.Si and Y were added to Ni-based alloys to produce the solid solutions L12-Ni_(3)(Al,Si)and L12-Ni_(3)Al+Ni_(5)Y,respectively.Calculations showed that NiO and Al_(2)O_(3)make up the passive area of the Ni_(3)Al 1 alloy.The introduction of SiO_(2)and Y(OH)3 in the passive region separately helped to minimize the alloys’susceptibility to corrosion.However,Si reduced the thermody-namical possibility of NiO for mation in the passive film,and the addition of Y caused extreme galvanic corrosion.Experiments on Ni-based alloys validated the results through electrochemical corrosion.It was also discovered that the presence of Ni_(5)Y produced galvanic corrosion and that Si reduced the oxide in the passive film,causing pitting corrosion.The corrosion prediction of the quaternary alloys indicates that the solid solution of Si in Ni_(5)Y reduces the galvanic corrosion effect and the dissolution of passive film.The current work demonstrates that phase diagrams and Pourbaix diagrams may be efficiently and accurately predicted using a well-constructed thermodynamic database,which has major implications for future studies on the corrosion behavior of multi-component alloys.展开更多
Interfacial engineering to alter the configuration of active sites in heterogeneous catalysts is a potential strategy for activity enhancement,but it remains unelucidated for metal-organic frameworks(MOFs).Here,we dem...Interfacial engineering to alter the configuration of active sites in heterogeneous catalysts is a potential strategy for activity enhancement,but it remains unelucidated for metal-organic frameworks(MOFs).Here,we demonstrate that the surface of two-dimensional Co-based MOF is modified by decorating Ag quantum dots(QDs)simply through in-situ reduction of Ag+ions.Toward oxygen evolution reaction(OER),it reveals that the catalysis is mediated by the reversible redox of Co sites between Co^(3+) and Co^(4+) states coupling with transfer of OHions.The decoration of Ag QDs decreases the redox potential of Co sites,and thus effectively decreases the overpotential of OER.The TOFs of Co sites are increased by 77 times to reach 5.4 s^(-1) at an overpotential of 0.35 V.We attribute the activity enhancement to the tuning of the coupling process between Co sites and OHions during the redox of Co sites by Ag QDs decoration based on Pourbaix analysis.展开更多
基金The National Key Basic Research Program of China under contract Nos 2013CB429700the National Special Fund for the 12th Five Year Plan of COMRA under contract Nos DY125-12-R-02 and DY125-12-R-05+3 种基金the National Natural Science Foundation of China under contract Nos 41325021,40830849,40976027 and 41476044the Shandong Province Natural Science Foundation of China for Distinguished Young Scholars under contract Nos JQ200913the Strategic Priority Research Program of the Chinese Academy of Sciences under contract No.XDA11030302the CAS/SAFEA International Partnership Program for Creative Research Teams
文摘Utilizing Si, Fe and Mn concentrations within the end-member PACMANUS hydrothermal fluid, Si-Fe-Mn-H2O Pourbaix diagrams were constructed at 300℃and 25℃. ThePourbaix diagrams show that the main Si, Fe and Mn oxides species precipitating from the hydrothermal fluid were SiO2, Fe（OH）3, Fe3（OH）8, Mn3O4, and Mn2O3at 25℃. During mixing of hydrothermal fluid with seawater, SiO2 precipitated earlier than Fe-Mn-oxyhydroxides because of the lower stability boundary. Then Fe（OH）2 precipitated first, followed by Fe3（OH）8 and Fe（OH）3, and last, small amounts of Mn3O4 and Mn2O3 precipitated. Fe（OH）3was readily de-posited in alkaline solution with little influence by Eh. There were many Si-Fe-Mn-concentric particles in the polished sections of the massive precipitates collected from PACMANUS. In the concentric nucleus and ellipsoid, Si oxides precipitated first before the hydrothermal fluid had mixed with seawater. In the concen-tric nucleus, after the precipitation of Si oxides, the increase of pH and Eh promoted the precipitation of Mn oxides around the Si oxides. In the large ellipsoid, the precipitation of Fe was divided into two periods. In the early period, increase of pH value of hydrothermal fluid produced by low-temperature convection and an input of a small volume of seawater promoted a small amount of Fe（OH）3 to precipitate in the Si-rich core. In the late period, after complete mixing with seawater and the resultant fluid was close to neutral or slightly alkaline in pH, Fe（OH）3was easily precipitated from the solution and distributed around the Si-rich core.
文摘Aldehydes are valuable intermediates with widespread industrial applications,and their traditional synthesis relies on chemical oxidation that is often hazardous and environmentally unfriendly.Electrochemical oxidation offers a more sustainable and milder alternative;however,it faces challenges such as aldehyde overoxidation and susceptibility to base-catalyzed Cannizzaro disproportionation.Electrochemical glycerol oxidation to glyceraldehyde is a representative example,which typically requires precious metal-based electrocatalysts but still suffers from low selectivity and activity.Here,we report a metal-free oxidation strategy mediated by 2,2,6,6-tetramethylpiperidine-1-oxyl.By systematically investigating the redox thermodynamics and kinetics of TEMPO across a broad pH range,we construct a Pourbaix diagram and elucidate the relative kinetics of each reaction step.These insights allow us to explain the anomalously high apparent Faradaic efficiency(~200%)observed under acidic conditions,and identify neutral media as the optimal environment for selective glyceraldehyde production.Under optimized conditions,our system achieves a glyceraldehyde Faradaic efficiency exceeding 93%and a partial current density of 23.3 mA cm^(-2)at 0.57 V—more than doubling the performance of the best reported precious metal-based systems.Furthermore,the versatility of this strategy extends to the selective oxidation of other primary alcohols to their corresponding aldehydes with near-unity selectivity.
基金the National Natural Science Foundation of China(Nos.51871024,51822401 and 52104319)the National Science and Technology Resources Investigation Program of China(No.2019FY101400)。
文摘This work investigated the chemical and electrochemical mechanisms of localised corrosion triggered by CaS·xMgO·y Al_(2)O_(3)·TiN complex inclusions in high strength low alloy steel(HSLAS)under a simulated marine environment.Special focus was given to the role of the TiN portion of the inclusion on the initiation and growth of the corrosion pits.The thermodynamic process of pitting initiation was investigated by Gibbs free energy,Pourbaix diagram and first principle calculation.Localised corrosion is mainly induced by inclusions and triggered by dissolution of adjacent distorted matrix.Chemical dissolution of CaS portion in CaS·xMgO·y Al_(2)O_(3)·TiN complex inclusion creates an acidic aggressive environment that accelerates the further dissolution of inclusion and matrix.Galvanic coupling effect between TiN inclusion and matrix is directly verified.TiN covered with a TiOfilm acts as the cathodic phase in galvanic corrosion,although it has a lower Volta potential than the matrix.This is an unusual correlation with the scanning Kelvin probe force microscopy result,which has been explained for this special system.
基金financially supported by the National Natural Science Foundation of China(No.U21A20127)Excellent Young Scientists Fund of National Natural Science Foundation of China(NSFC),No.52222507)the Natural Science Foundation of Ningbo City(No.2022J304).
文摘Pourbaix diagrams are calculated to describe electrochemical processes for alloys in aqueous solution.With the multi-component differentiation of alloy systems,the construction of Pourbaix diagrams is fac-ing challenges,especially for non-single-phase alloy systems.In this study,the simultaneous construction of phase diagrams and Pourbaix diagrams were implemented for predicting the evolution of the phases in the immune and passive regions.The CALPHAD(CALculation of PHAse Diagram)approach was used to quickly access the Gibbs free energies of various phases and the chemical potential of the elements in the phases from the thermodynamic database of the Ni-Si-Al-Y system.The corrosion behavior of two typical Ni-Al-Si and Ni-Al-Y systems was investigated.Si and Y were added to Ni-based alloys to produce the solid solutions L12-Ni_(3)(Al,Si)and L12-Ni_(3)Al+Ni_(5)Y,respectively.Calculations showed that NiO and Al_(2)O_(3)make up the passive area of the Ni_(3)Al 1 alloy.The introduction of SiO_(2)and Y(OH)3 in the passive region separately helped to minimize the alloys’susceptibility to corrosion.However,Si reduced the thermody-namical possibility of NiO for mation in the passive film,and the addition of Y caused extreme galvanic corrosion.Experiments on Ni-based alloys validated the results through electrochemical corrosion.It was also discovered that the presence of Ni_(5)Y produced galvanic corrosion and that Si reduced the oxide in the passive film,causing pitting corrosion.The corrosion prediction of the quaternary alloys indicates that the solid solution of Si in Ni_(5)Y reduces the galvanic corrosion effect and the dissolution of passive film.The current work demonstrates that phase diagrams and Pourbaix diagrams may be efficiently and accurately predicted using a well-constructed thermodynamic database,which has major implications for future studies on the corrosion behavior of multi-component alloys.
基金gratefully acknowledge the financial support from the National Natural Science Foundation of China(51802265,22002119)the Fundamental Research Funds for the Central Universities of China+2 种基金the Initiative Postdocs Supporting Program(BX20190281)the General Program,Science and Technology Program of Taicang,China(TC2020JC01)the National Natural Science Foundation of Jiangsu,China(BK20200261)。
文摘Interfacial engineering to alter the configuration of active sites in heterogeneous catalysts is a potential strategy for activity enhancement,but it remains unelucidated for metal-organic frameworks(MOFs).Here,we demonstrate that the surface of two-dimensional Co-based MOF is modified by decorating Ag quantum dots(QDs)simply through in-situ reduction of Ag+ions.Toward oxygen evolution reaction(OER),it reveals that the catalysis is mediated by the reversible redox of Co sites between Co^(3+) and Co^(4+) states coupling with transfer of OHions.The decoration of Ag QDs decreases the redox potential of Co sites,and thus effectively decreases the overpotential of OER.The TOFs of Co sites are increased by 77 times to reach 5.4 s^(-1) at an overpotential of 0.35 V.We attribute the activity enhancement to the tuning of the coupling process between Co sites and OHions during the redox of Co sites by Ag QDs decoration based on Pourbaix analysis.
