This study introduced a microwave-assisted pyrolysis method for the rapid and efficientpreparation of boron-doped porous biochar. The resulting biochar exhibited a large specificsurface area (933.39 m^(2)/g), a rich p...This study introduced a microwave-assisted pyrolysis method for the rapid and efficientpreparation of boron-doped porous biochar. The resulting biochar exhibited a large specificsurface area (933.39 m^(2)/g), a rich porous structure (1.044 cm3/g), and abundant active sites.Consequently, the prepared boron-doped porous biochar exhibited higher efficiency in adsorbingtetracycline with a maximum adsorption capacity of 413.223 mg/g, which significantlyexceeded that of unmodified biochar andmost commercial and reported adsorbents.The correlation analysis between the adsorption capacity and adsorbent characteristics revealedthat the formation of the –BCO_(2) group enhanced π–π electron donor–acceptor interactionsbetween boron-doped porous biochar and tetracycline. This mechanism mainlycontributed to the enhanced adsorption of tetracycline by boron-doped porous biochar. Additionally,the as-prepared boron-doped porous biochar exhibited broad applications in removingantibiotics (tetracycline), phenolics (bisphenol A), and dyes (methylene blue andrhodamine B). Moreover, the boron-doped porous biochar exhibited satisfactory stability,and its adsorption capacity can be nearly completely regenerated through simple heat treatment.This study provides new insights into the effectiveness of boron-doped carbonaceousmaterials in removing antibiotic contaminants.展开更多
SnO_(2)is regarded as a promising lithium storage material due to the advantage of sequential conversion-alloying reaction mechanism.Unfortunately,large volume expansion and undesirable reaction reversibility are iden...SnO_(2)is regarded as a promising lithium storage material due to the advantage of sequential conversion-alloying reaction mechanism.Unfortunately,large volume expansion and undesirable reaction reversibility are identified as two fatal drawbacks.Herein,SnO_(2)nanoparticles encapsulated in graphene oxide-coated porous biochar skeleton(SnO_(2)/PB@GO)are skillfully constructed via an efficient one-step hydrothermal process to be employed as composite anode materials,in which the PB skeleton extracted from waste tea-seed shells possesses enough space to buffer drastic volume variation and the GO coating acts as robust physical matrix to prevent structural degradation.Moreover,double-carbon components successfully anchor SnO_(2)nanoparticles to promote contact and reaction between Sn and Li_(2)O to guarantee high reaction reversibility and structural integration of SnO_(2)/PB@GO electrode.As expected,SnO_(2)/PB@GO-based cell achieves high reversible specific capacity of 783.5 mAh·g^(-1)after 100 cycles at0.1 A.g^(-1)and delivers desirable cycling stability with capacity retention ratio of 81.62%after 300 cycles at1.0 A.g^(-1).Therefore,this work may provide new perspectives on the modification of conversion or alloying typeanodes for lithium-ion batteries and present a feasible strategy to take full advantage of the waste biomass.展开更多
Self-nitrogen-doped porous biochar derived from kapok fibers possesses unique structure and excel- lent electrochemical performance. In this study, one-step pyrolysis method was introduced to prepare porous biochar fr...Self-nitrogen-doped porous biochar derived from kapok fibers possesses unique structure and excel- lent electrochemical performance. In this study, one-step pyrolysis method was introduced to prepare porous biochar from kapok fibers, and effect of pyrolysis temperature on structure and electrochemical performance of the porous biochar was investigated. It was found that pyrolysis temperature played an important role in determining microstructure of the biochar. At the pyrolysis temperature of 750 ℃, the as-prepared biochar （CKF-750） represented a largest specific surface area of 1125.7 m^2 g^-1 and pore vol- ume of 0.7130 m^3 g^-1, and hence brings CKF-750 a highest specific capacitance of 283 F g^-1 at a current density of I A g^-1 in a 6 mol L^-1 KOH electrolyte. Furthermore, the cycle stability of CKF-750 was wonderful, and the specific capacitance retained almost constant after 10000 cycles. Therefore, the pyrolysis tem- perature of 750 ℃ is optimal for the preparation of porous hiochar as an outstanding electrode material for supercapacitor.展开更多
Design of multi-functional microwave absorption materials with strong dissipation ability is a practical approach to address the current issue of electromagnetic radiation pollution.Herein,based on the ex-change bias ...Design of multi-functional microwave absorption materials with strong dissipation ability is a practical approach to address the current issue of electromagnetic radiation pollution.Herein,based on the ex-change bias interaction between ferromagnetic and anti-ferromagnetic interfaces,a series of absorbers composed of the porous biochar loaded with ferromagnetic/anti-ferromagnetic NiCO_(2)O_(4)/CoO were suc-cessfully prepared via a fairly simple process of one-step calcination.By regulating the calcination tem-perature,the pore size and porosity of porous carbon,morphology of loaded NPs as well as the elec-tromagnetic response property and impedance matching characteristic in such composites can be mod-ulated.The porous biochar/NiCO_(2)O_(4)/CoO composite prepared under 350 ℃ possesses a remarkable elec-tromagnetic absorption reflection loss(RL)of-48.41 dB at 9.12 GHz with 2.5 mm thickness,and the effective absorption bandwidth(EAB)of 4.32 GHz with 2.2 mm thickness is located at X band,this is owing to the strong coupling effect of multiple dielectric polarizations,magnetic resonances,and eddy current consumption under matched impedance.In addition,the microwave absorbing patch prepared with this composite exhibits a well-hydrophobic property for self-cleaning function,and the large exten-sibility with substantial breaking strength endows its practical usage as a flexible absorber.展开更多
The global consumption of p-xylene(PX)for the production of polymers has raised serious concerns about its impact on the environment.As various reports have shown the risks that PX could pose to human health,research ...The global consumption of p-xylene(PX)for the production of polymers has raised serious concerns about its impact on the environment.As various reports have shown the risks that PX could pose to human health,research into cost-effective remedial methods to remove PX from the environment has gained attraction.In this work,a hierarchical porous crab shell biochar(KCS)was synthesized,characterized,and evaluated for its efficiency to remove PX from aqueous solution.The characterizations of KCS,including the porous structure,surface functional group,phase structure,and surface morphology,were discussed by N_(2) adsorption-desorption,FTIR,XRD,and SEM.Batch adsorption experiments showed that the maximum adsorption capacity of PX on KCS was 393 mg/g within 5 min,larger than most biological/biomass materials,mainly due to the higher specific surface area of 2046 m^(2)/g,and abundant lipophilic functional groups.Subsequent adsorption kinetics study indicated a pseudo-second-order model which implied that the adsorption of PX was due to chemisorption.Thermodynamic parameters showed that the values ofΔH°andΔG°were both negative,indicating that the PX adsorption process on KCS was spontaneous and exothermic.The performance of KCS in delivering a cost-effective,fast,and efficient solution for the removal of PX from aqueous solution would greatly benefit current environmental remediation efforts.展开更多
The development of biochar-based granule-like adsorbents suitable for scaled-up application has been attracting increasing attention in the field of water treatment.Herein,a new formable porous granulated biochar load...The development of biochar-based granule-like adsorbents suitable for scaled-up application has been attracting increasing attention in the field of water treatment.Herein,a new formable porous granulated biochar loaded with La-Fe(hydr)oxides/montmorillonite(LaFe/MB)was fabricated via a granulation and pyrolysis process for enhanced phosphorus(P)removal from wastewater.Montmorillonite acted as a binder that increased the size of the granulated biochar,while the use of Fe promoted the surface charge and facilitated the dispersion of La,which was responsible for selective phosphate removal.LaFe/MB exhibited rapid phosphate adsorption kinetics and a high maximum adsorption capacity(Langmuir model,52.12 mg P g^(−1)),which were better than those of many existing granulated materials.The desorption and recyclability experiments showed that LaFe/MB could be regenerated,and maintained 76.7%of its initial phosphate adsorption capacity after four adsorption cycles.The high hydraulic endurance strength retention rate of the developed material(91.6%)suggested high practical applicability in actual wastewater.Electro-static attraction,surface precipitation,and inner-sphere complexation via ligand exchange were found to be involved in selective P removal over a wide pH range of 3-9.The thermodynamic parameters were determined,which revealed the feasibility and spontaneity of adsorption.Based on approximate site energy distribution analyses,high distribution frequency contributed to efficient P removal.The research results provide a new insight that LaFe/MB shows great application prospects for advanced phosphate removal from wastewater.展开更多
Biochar with a highly accessible specific surface area can display a higher performance when it is used as the cathode of lithium-ion capacitors.Facing the complex composition and diversity of biomass precursors,there...Biochar with a highly accessible specific surface area can display a higher performance when it is used as the cathode of lithium-ion capacitors.Facing the complex composition and diversity of biomass precursors,there is a lack of a universally applicable method to construct hierarchical porous biochar controllably.In this work,a multi-stage activation strategy combining the feature of different activation methods is proposed for this target.To confirm the porous characteristic in prepared samples,N_(2) adsorption-desorption and transmission electron microscope were used.As the optimal sample,BC-P3K4S had the highest specific surface area of 3583.3 m^(2) g^(−1).Evaluated as the electrode for a lithium-ion capacitor,BC-P3K4S displayed a capacity of 139.1 mAh g^(−1) at 0.1 A g^(−1).After coupling it with pre-lithiated hard carbon,the full device exhibited a high energy density of 129.3 W h kg^(−1) at 153 W kg^(−1).The work outlined herein offers some insights into the preparation of hierarchical porous biochar from complex biomass by multistep activation method.展开更多
Aquatic pollution caused by antibiotics poses a significant threat to human health and the ecosystem.Inspired from“Emmental Cheese”that owns lots of natural pores,we here fabricated a hierarchical cheese-like porous...Aquatic pollution caused by antibiotics poses a significant threat to human health and the ecosystem.Inspired from“Emmental Cheese”that owns lots of natural pores,we here fabricated a hierarchical cheese-like porous Spirulina residue biochar(KSBC)activated by KHCO_(3)for efficiently boosting the removal of sulfathiazole(STZ).Through learning form nature that the CO_(2)produced by bacteria can serve as the natural pore maker(like cheese-making),KHCO_(3)was thus selected as the gas generating agent in this study.The effect of adding KHCO_(3)on the surface properties of KSBC was comprehensively investigated.Benefiting from the activation,the KSBC with the mass ratio of 2:1(2K-SBC)possessed the largest specific surface areas(1100 m^(2)g^(-1)),which was approximately 81 times that of the original(not activated)Spirulina residue biochar(SBC)(13.56 m^(2)g^(-1)).Moreover,2K-SBC exhibited the maximum adsorption capacity for STZ(218.4 mg g^(-1)),dramatically higher than the SBC(25.78 mg g^(-1)).The adsorption kinetics and adsorption isotherms exhibited that the adsorption behavior of 2K-SBC for STZ was consistent with the pseudo-second-order and Langmuir models.Additionally,the adsorption thermodynamics revealed that the adsorption of STZ on 2K-SBC was spontaneous and exothermic.The pore-filling and electrostatic interaction were considered the main mechanism for the adsorption of STZ on 2K-SBC,whereas the p-p electron donor-acceptor(EDA)interaction and hydrogen bond would also partially contribute to the adsorption process.展开更多
A chain of GdCe oxides boosted biochars derived from maize straw and sewage sludge(GdyCe1-y/MPBs)were fabricated for formaldehyde(HCHO)catalytic decomposition.The ingenerate relationship between the abatement performa...A chain of GdCe oxides boosted biochars derived from maize straw and sewage sludge(GdyCe1-y/MPBs)were fabricated for formaldehyde(HCHO)catalytic decomposition.The ingenerate relationship between the abatement performance and corresponding structural feature was comprehensively evaluated by XPS,in situ DRIFTS,BET,XRD,SEM and H_(2)-TPR.Meanwhile,10%Gd0.25Ce0.75/MPB exhibited excellent performance,favorable SO_(2) and moisture toleration over a broad temperature range from 160 to 320℃,where it achieved 96.8%removal efficiency with 90.5%selectivity at 200℃.The single or united effects of O_(2),SO_(2),H_(2)O on HCHO abatement over 10%Gd_(0.25)Ce_(0.75)/MPB were tested,and the findings demonstrated that the suppressive effects of SO_(2) and H_(2)O outweighed the promoting influence of O_(2) within a specific range.Gd and Ce co-modified MPB revealed superior HCHO removal capability in contrast to that of Gd or Ce severally modified MPB,ascribing to the synergistic effect of GdO_(x) and CeO_(x) and benefitting from the augmentation of surface area and total pore volume,the aggrandizement of surface active oxygen species,the promotion of redox ability and the inhibition crystallization of CeO_(x).According to in situ DRIFTS,a series of intermediates including formate species and dioxymethylene(DOM)were produced,which would eventually decompose into H_(2)O and CO_(2).In addition,the mass transfer and diffusion of the reactants along with the accessibility of the catalytic sites were enlarged by the hierarchical porous structure of the support,which were also answerable for its distinguished catalytic performance.Furthermore,10%Gd0.25Ce0.75/MPB possessed remarkable potential for industrial applications.展开更多
In this work,porous biochar(MN-TRB_(750))was fabricated via direct pyrolysis of tea residue(TR)and Mg(NO_(3))_(2)·6H_(2)O(MN).The as-synthesized MN-TRB_(750) reached a specific surface area of 839.54 m^(2)·g...In this work,porous biochar(MN-TRB_(750))was fabricated via direct pyrolysis of tea residue(TR)and Mg(NO_(3))_(2)·6H_(2)O(MN).The as-synthesized MN-TRB_(750) reached a specific surface area of 839.54 m^(2)·g^(-1)and an average pore size of 3.75 nm with multi-level pore architecture.MN decreased TR's carbonization temperature and promoted the aromatics extent,pore structure for the frizzly flake-like biochar.Rhodamine B(RhB)was chosen as the adsorbate to explore the removal performance of organic dyes in this study.The results indicated that the maximum adsorption capacity of RhB on MN-TRB_(750) at 20℃ is up to 809.0 mg·g^(-1)with isotherms fitted well to Freundlich and Dubinin-Radushkevic models.The adsorption kinetics followed pseudo-second-order and Elovich models with an equilibrium adsorption capacity of 757.6 mg·g^(-1)as the initial concentration of RhB is 260 mg·L^(-1).High pore filling,hydrogen bond,π-πinteraction determined the adsorption of RhB onto MN-TRB850 through a multi-active center and exothermic chemical sorption process.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52100062,and 52230001)China Postdoctoral Science Foundation(No.2023M732785).
文摘This study introduced a microwave-assisted pyrolysis method for the rapid and efficientpreparation of boron-doped porous biochar. The resulting biochar exhibited a large specificsurface area (933.39 m^(2)/g), a rich porous structure (1.044 cm3/g), and abundant active sites.Consequently, the prepared boron-doped porous biochar exhibited higher efficiency in adsorbingtetracycline with a maximum adsorption capacity of 413.223 mg/g, which significantlyexceeded that of unmodified biochar andmost commercial and reported adsorbents.The correlation analysis between the adsorption capacity and adsorbent characteristics revealedthat the formation of the –BCO_(2) group enhanced π–π electron donor–acceptor interactionsbetween boron-doped porous biochar and tetracycline. This mechanism mainlycontributed to the enhanced adsorption of tetracycline by boron-doped porous biochar. Additionally,the as-prepared boron-doped porous biochar exhibited broad applications in removingantibiotics (tetracycline), phenolics (bisphenol A), and dyes (methylene blue andrhodamine B). Moreover, the boron-doped porous biochar exhibited satisfactory stability,and its adsorption capacity can be nearly completely regenerated through simple heat treatment.This study provides new insights into the effectiveness of boron-doped carbonaceousmaterials in removing antibiotic contaminants.
基金financially supported by the National Natural Science Foundation of China(Nos.52274292 and 51874046)the Outstanding Youth Foundation of Hubei Province(No.2020CFA090)+1 种基金the Project of Scientific Research of Jingzhou(No.2023EC37)the Young Top-notch Talent Cultivation Program of Hubei Province
文摘SnO_(2)is regarded as a promising lithium storage material due to the advantage of sequential conversion-alloying reaction mechanism.Unfortunately,large volume expansion and undesirable reaction reversibility are identified as two fatal drawbacks.Herein,SnO_(2)nanoparticles encapsulated in graphene oxide-coated porous biochar skeleton(SnO_(2)/PB@GO)are skillfully constructed via an efficient one-step hydrothermal process to be employed as composite anode materials,in which the PB skeleton extracted from waste tea-seed shells possesses enough space to buffer drastic volume variation and the GO coating acts as robust physical matrix to prevent structural degradation.Moreover,double-carbon components successfully anchor SnO_(2)nanoparticles to promote contact and reaction between Sn and Li_(2)O to guarantee high reaction reversibility and structural integration of SnO_(2)/PB@GO electrode.As expected,SnO_(2)/PB@GO-based cell achieves high reversible specific capacity of 783.5 mAh·g^(-1)after 100 cycles at0.1 A.g^(-1)and delivers desirable cycling stability with capacity retention ratio of 81.62%after 300 cycles at1.0 A.g^(-1).Therefore,this work may provide new perspectives on the modification of conversion or alloying typeanodes for lithium-ion batteries and present a feasible strategy to take full advantage of the waste biomass.
基金supported financially by the Natural Science Foundation of Fujian Province,China(No.2016J01729)the Key Program of Youth Natural Science Foundation of Fujian Province University,China(No.JZ160413)
文摘Self-nitrogen-doped porous biochar derived from kapok fibers possesses unique structure and excel- lent electrochemical performance. In this study, one-step pyrolysis method was introduced to prepare porous biochar from kapok fibers, and effect of pyrolysis temperature on structure and electrochemical performance of the porous biochar was investigated. It was found that pyrolysis temperature played an important role in determining microstructure of the biochar. At the pyrolysis temperature of 750 ℃, the as-prepared biochar （CKF-750） represented a largest specific surface area of 1125.7 m^2 g^-1 and pore vol- ume of 0.7130 m^3 g^-1, and hence brings CKF-750 a highest specific capacitance of 283 F g^-1 at a current density of I A g^-1 in a 6 mol L^-1 KOH electrolyte. Furthermore, the cycle stability of CKF-750 was wonderful, and the specific capacitance retained almost constant after 10000 cycles. Therefore, the pyrolysis tem- perature of 750 ℃ is optimal for the preparation of porous hiochar as an outstanding electrode material for supercapacitor.
基金Surface Project of Local Development in Science and Technology Guided by Central Government(No.2021ZYD0041)National Natural Science Foundation of China(Nos.52377026 and 52301192)+2 种基金Natural Science Foundation of Shandong Province(No.ZR2019YQ24)Shandong Taishan Scholars Young Expert Program(No.tsqn202103057)Qingchuang Talents Induction Program of Shandong Higher Education Institution(Research and Innovation Team of Structural-Functional Polymer Composites).
文摘Design of multi-functional microwave absorption materials with strong dissipation ability is a practical approach to address the current issue of electromagnetic radiation pollution.Herein,based on the ex-change bias interaction between ferromagnetic and anti-ferromagnetic interfaces,a series of absorbers composed of the porous biochar loaded with ferromagnetic/anti-ferromagnetic NiCO_(2)O_(4)/CoO were suc-cessfully prepared via a fairly simple process of one-step calcination.By regulating the calcination tem-perature,the pore size and porosity of porous carbon,morphology of loaded NPs as well as the elec-tromagnetic response property and impedance matching characteristic in such composites can be mod-ulated.The porous biochar/NiCO_(2)O_(4)/CoO composite prepared under 350 ℃ possesses a remarkable elec-tromagnetic absorption reflection loss(RL)of-48.41 dB at 9.12 GHz with 2.5 mm thickness,and the effective absorption bandwidth(EAB)of 4.32 GHz with 2.2 mm thickness is located at X band,this is owing to the strong coupling effect of multiple dielectric polarizations,magnetic resonances,and eddy current consumption under matched impedance.In addition,the microwave absorbing patch prepared with this composite exhibits a well-hydrophobic property for self-cleaning function,and the large exten-sibility with substantial breaking strength endows its practical usage as a flexible absorber.
基金supported by the Natural Science Foundation of Zhejiang Province of China(No.LQ16D060004)Key Research and Development Projects of Zhejiang Province of China(No.2018C02043)+1 种基金Demonstration Project of Marine Economic Innovation and Development of Zhoushan City of ChinaDemonstration Project of Marine Economic Innovation and Development of Yantai City of China(No.YHCX-SW-L-201705).
文摘The global consumption of p-xylene(PX)for the production of polymers has raised serious concerns about its impact on the environment.As various reports have shown the risks that PX could pose to human health,research into cost-effective remedial methods to remove PX from the environment has gained attraction.In this work,a hierarchical porous crab shell biochar(KCS)was synthesized,characterized,and evaluated for its efficiency to remove PX from aqueous solution.The characterizations of KCS,including the porous structure,surface functional group,phase structure,and surface morphology,were discussed by N_(2) adsorption-desorption,FTIR,XRD,and SEM.Batch adsorption experiments showed that the maximum adsorption capacity of PX on KCS was 393 mg/g within 5 min,larger than most biological/biomass materials,mainly due to the higher specific surface area of 2046 m^(2)/g,and abundant lipophilic functional groups.Subsequent adsorption kinetics study indicated a pseudo-second-order model which implied that the adsorption of PX was due to chemisorption.Thermodynamic parameters showed that the values ofΔH°andΔG°were both negative,indicating that the PX adsorption process on KCS was spontaneous and exothermic.The performance of KCS in delivering a cost-effective,fast,and efficient solution for the removal of PX from aqueous solution would greatly benefit current environmental remediation efforts.
基金National Key Research and Development Program of China(2021YFD1700805)National Natural Science Foundation of China(41807132,22078136,41877090)the Jiangsu Province Agricultural Independent Innovation Fund(CX(19)2003).
文摘The development of biochar-based granule-like adsorbents suitable for scaled-up application has been attracting increasing attention in the field of water treatment.Herein,a new formable porous granulated biochar loaded with La-Fe(hydr)oxides/montmorillonite(LaFe/MB)was fabricated via a granulation and pyrolysis process for enhanced phosphorus(P)removal from wastewater.Montmorillonite acted as a binder that increased the size of the granulated biochar,while the use of Fe promoted the surface charge and facilitated the dispersion of La,which was responsible for selective phosphate removal.LaFe/MB exhibited rapid phosphate adsorption kinetics and a high maximum adsorption capacity(Langmuir model,52.12 mg P g^(−1)),which were better than those of many existing granulated materials.The desorption and recyclability experiments showed that LaFe/MB could be regenerated,and maintained 76.7%of its initial phosphate adsorption capacity after four adsorption cycles.The high hydraulic endurance strength retention rate of the developed material(91.6%)suggested high practical applicability in actual wastewater.Electro-static attraction,surface precipitation,and inner-sphere complexation via ligand exchange were found to be involved in selective P removal over a wide pH range of 3-9.The thermodynamic parameters were determined,which revealed the feasibility and spontaneity of adsorption.Based on approximate site energy distribution analyses,high distribution frequency contributed to efficient P removal.The research results provide a new insight that LaFe/MB shows great application prospects for advanced phosphate removal from wastewater.
基金National Natural Science Foundation of China(51976234)Forestry technology projects of Zhejiang Province(2023SY04)+1 种基金Foundation of Jiangsu Key Lab of Biomass Energy and Material(JSBEM-S-202101)National Nonprofit Institute Research Grant of Chinese Academy of Forestry(CAFYBB2020ZF001).
文摘Biochar with a highly accessible specific surface area can display a higher performance when it is used as the cathode of lithium-ion capacitors.Facing the complex composition and diversity of biomass precursors,there is a lack of a universally applicable method to construct hierarchical porous biochar controllably.In this work,a multi-stage activation strategy combining the feature of different activation methods is proposed for this target.To confirm the porous characteristic in prepared samples,N_(2) adsorption-desorption and transmission electron microscope were used.As the optimal sample,BC-P3K4S had the highest specific surface area of 3583.3 m^(2) g^(−1).Evaluated as the electrode for a lithium-ion capacitor,BC-P3K4S displayed a capacity of 139.1 mAh g^(−1) at 0.1 A g^(−1).After coupling it with pre-lithiated hard carbon,the full device exhibited a high energy density of 129.3 W h kg^(−1) at 153 W kg^(−1).The work outlined herein offers some insights into the preparation of hierarchical porous biochar from complex biomass by multistep activation method.
基金the following funding:National Natural Science Foundation of China(No.52070057 and No.51961165104)Project of a Thousand Youth Talents(No.AUGA2160100917)Open Project of State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.2019DX09).
文摘Aquatic pollution caused by antibiotics poses a significant threat to human health and the ecosystem.Inspired from“Emmental Cheese”that owns lots of natural pores,we here fabricated a hierarchical cheese-like porous Spirulina residue biochar(KSBC)activated by KHCO_(3)for efficiently boosting the removal of sulfathiazole(STZ).Through learning form nature that the CO_(2)produced by bacteria can serve as the natural pore maker(like cheese-making),KHCO_(3)was thus selected as the gas generating agent in this study.The effect of adding KHCO_(3)on the surface properties of KSBC was comprehensively investigated.Benefiting from the activation,the KSBC with the mass ratio of 2:1(2K-SBC)possessed the largest specific surface areas(1100 m^(2)g^(-1)),which was approximately 81 times that of the original(not activated)Spirulina residue biochar(SBC)(13.56 m^(2)g^(-1)).Moreover,2K-SBC exhibited the maximum adsorption capacity for STZ(218.4 mg g^(-1)),dramatically higher than the SBC(25.78 mg g^(-1)).The adsorption kinetics and adsorption isotherms exhibited that the adsorption behavior of 2K-SBC for STZ was consistent with the pseudo-second-order and Langmuir models.Additionally,the adsorption thermodynamics revealed that the adsorption of STZ on 2K-SBC was spontaneous and exothermic.The pore-filling and electrostatic interaction were considered the main mechanism for the adsorption of STZ on 2K-SBC,whereas the p-p electron donor-acceptor(EDA)interaction and hydrogen bond would also partially contribute to the adsorption process.
基金supported by the Scientific Research Project of Hunan Provincial EducationDepartment(No.22B0458)the National Natural Science Foundation of China(No.52270102).
文摘A chain of GdCe oxides boosted biochars derived from maize straw and sewage sludge(GdyCe1-y/MPBs)were fabricated for formaldehyde(HCHO)catalytic decomposition.The ingenerate relationship between the abatement performance and corresponding structural feature was comprehensively evaluated by XPS,in situ DRIFTS,BET,XRD,SEM and H_(2)-TPR.Meanwhile,10%Gd0.25Ce0.75/MPB exhibited excellent performance,favorable SO_(2) and moisture toleration over a broad temperature range from 160 to 320℃,where it achieved 96.8%removal efficiency with 90.5%selectivity at 200℃.The single or united effects of O_(2),SO_(2),H_(2)O on HCHO abatement over 10%Gd_(0.25)Ce_(0.75)/MPB were tested,and the findings demonstrated that the suppressive effects of SO_(2) and H_(2)O outweighed the promoting influence of O_(2) within a specific range.Gd and Ce co-modified MPB revealed superior HCHO removal capability in contrast to that of Gd or Ce severally modified MPB,ascribing to the synergistic effect of GdO_(x) and CeO_(x) and benefitting from the augmentation of surface area and total pore volume,the aggrandizement of surface active oxygen species,the promotion of redox ability and the inhibition crystallization of CeO_(x).According to in situ DRIFTS,a series of intermediates including formate species and dioxymethylene(DOM)were produced,which would eventually decompose into H_(2)O and CO_(2).In addition,the mass transfer and diffusion of the reactants along with the accessibility of the catalytic sites were enlarged by the hierarchical porous structure of the support,which were also answerable for its distinguished catalytic performance.Furthermore,10%Gd0.25Ce0.75/MPB possessed remarkable potential for industrial applications.
基金Supported by the Innovation and Entrepreneurship Plan Project of Shaanxi Province and Shaanxi Xueqian Normal University for College Students(S202314390048,2023DC048)。
文摘In this work,porous biochar(MN-TRB_(750))was fabricated via direct pyrolysis of tea residue(TR)and Mg(NO_(3))_(2)·6H_(2)O(MN).The as-synthesized MN-TRB_(750) reached a specific surface area of 839.54 m^(2)·g^(-1)and an average pore size of 3.75 nm with multi-level pore architecture.MN decreased TR's carbonization temperature and promoted the aromatics extent,pore structure for the frizzly flake-like biochar.Rhodamine B(RhB)was chosen as the adsorbate to explore the removal performance of organic dyes in this study.The results indicated that the maximum adsorption capacity of RhB on MN-TRB_(750) at 20℃ is up to 809.0 mg·g^(-1)with isotherms fitted well to Freundlich and Dubinin-Radushkevic models.The adsorption kinetics followed pseudo-second-order and Elovich models with an equilibrium adsorption capacity of 757.6 mg·g^(-1)as the initial concentration of RhB is 260 mg·L^(-1).High pore filling,hydrogen bond,π-πinteraction determined the adsorption of RhB onto MN-TRB850 through a multi-active center and exothermic chemical sorption process.
