Solid polymer electrolytes(SPEs)have attracted much attention for their safety,ease of packaging,costeffectiveness,excellent flexibility and stability.Poly-dioxolane(PDOL)is one of the most promising matrix materials ...Solid polymer electrolytes(SPEs)have attracted much attention for their safety,ease of packaging,costeffectiveness,excellent flexibility and stability.Poly-dioxolane(PDOL)is one of the most promising matrix materials of SPEs due to its remarkable compatibility with lithium metal anodes(LMAs)and suitability for in-situ polymerization.However,poor thermal stability,insufficient ionic conductivity and narrow electrochemical stability window(ESW)hinder its further application in lithium metal batteries(LMBs).To ameliorate these problems,we have successfully synthesized a polymerized-ionic-liquid(PIL)monomer named DIMTFSI by modifying DOL with imidazolium cation coupled with TFSI^(-)anion,which simultaneously inherits the lipophilicity of DOL,high ionic conductivity of imidazole,and excellent stability of PILs.Then the tridentate crosslinker trimethylolpropane tris[3-(2-methyl-1-aziridine)propionate](TTMAP)was introduced to regulate the excessive Li^(+)-O coordination and prepare a flame-retardant SPE(DT-SPE)with prominent thermal stability,wide ESW,high ionic conductivity and abundant Lit transference numbers(t_(Li+)).As a result,the LiFePO_(4)|DT-SPE|Li cell exhibits a high initial discharge specific capacity of 149.60 mAh g^(-1)at 0.2C and 30℃with a capacity retention rate of 98.68%after 500 cycles.This work provides new insights into the structural design of PIL-based electrolytes for long-cycling LMBs with high safety and stability.展开更多
In this work,by combining the specific selectivity of molecularly imprinted polymer(MIP)with a simple and sensitive electrochemiluminescence(ECL)detection method,a molecularly imprinted ECL sensor for kanamycin(KA)was...In this work,by combining the specific selectivity of molecularly imprinted polymer(MIP)with a simple and sensitive electrochemiluminescence(ECL)detection method,a molecularly imprinted ECL sensor for kanamycin(KA)was developed.The MIP film was synthesized on the surface of gold electrode via electrochemical polymerization,using pyrrole(PY)as the functional monomer and KA as the template molecule.The commonly used luminescent reagent Ru(bpy)32+was employed as the ECL probe,and its co-reagent tripropylamine(TPA)was added to enhance the detection sensitivity of the sensor.Quantitative analysis of KA was performed by evaluating the difference in ECL responses between MIP film electrodes after KA removal and KA rebinding.The sensor exhibited high selectivity,good reproducibility,and stability toward KA,with a linear range of 5.00×10^(-8) to 1.00×10^(-5) mol·L^(-1) and a limit of detection of 1.67×10^(-8) mol·L^(-1)(S/N=3).This work would provide a new idea for the development of simple and sensitive molecularly imprinted ECL sensors.展开更多
Gel polymer electrolytes(GPEs)present the best compromise between mechanical and electrochemical properties,as well as an improvement of the cell safety in the framework of Li metal batteries production.However,the po...Gel polymer electrolytes(GPEs)present the best compromise between mechanical and electrochemical properties,as well as an improvement of the cell safety in the framework of Li metal batteries production.However,the polymerization mechanism typically employed relies on the presence of an initiator,and is hindered by oxygen,thus impeding the industrial scale-up of the GPEs production.In this work,an UV-mediated thiol-ene polymerization,employing polyethylene glycol diacrylate(PEGDA)as oligomer,was carried out in a liquid electrolyte solution(1M LiTFSI in EC/DEC)to obtain a self-standing GPE.A comparative study between two different thiol-containing crosslinkers(trimethylolpropane tris(3-mercaptopropionate)-T3 and pentaerythritol tetrakis(3-mercaptopropionate)-T4)was carried out,studying the effects of the crosslinking environment and the GPE production methods on the cell performances.All the produced GPEs present an excellent room temperature ionic conductivity above 1 mS cm^(-1),as well as a wide electrochemical stability window up to 4.59 V.When cycled at a current density of C/10 for more than 250 cycles,all of the tested cells showed a stable cycling profile and a specific capacity>100 mAh g^(-1),indicating the suitability of such processes for up-scaling.展开更多
Organosilicone thin films were prepared through plasma polymerization(pp)in a plasma enhance chemical vapour deposition(PECVD)system,utilizing hexamethyldisilazane(HMDSN)as a monomer precursor,at varying distances(25 ...Organosilicone thin films were prepared through plasma polymerization(pp)in a plasma enhance chemical vapour deposition(PECVD)system,utilizing hexamethyldisilazane(HMDSN)as a monomer precursor,at varying distances(25 mm,35 mm,45 mm,55 mm,and 65 mm)from the plasma source to the substrate.Research has examined how the distance between the substrate and plasma source impacts the properties of thin films,including their thickness,surface morphology,and photoluminescence(PL).It was discovered that as the distance increased,both film thickness and PL intensity also increased.Additionally,the film was observed to be more uniform and smoother when deposited 45 mm below the plasma source.展开更多
In-situ polymerized solid-state lithium metal batteries have garnered significant attention due to their conformal interface contact and continuous pathways for lithium ion(Li^(+))conduction.However,their electrochemi...In-situ polymerized solid-state lithium metal batteries have garnered significant attention due to their conformal interface contact and continuous pathways for lithium ion(Li^(+))conduction.However,their electrochemical performance is often hindered by slow Li^(+)transport within high-area-loading cathodes.This study presents an in-situ poly(ε-caprolactone)electrolyte with gradient molar mass(iGPCE)through lithium metal anode(LMA)-induced anionic ring-opening polymerization.Our electrochemical and kinetic analyses reveal that the iGPCE,characterized by low molar mass(M),significantly enhances Li~+diffusion within high-area-loading cathodes and bulk electrolytes,thereby reducing concentration polarization and promoting uniform electrochemical reactions.Moreover,the high M region on LMA side acts as artificial solid electrolyte interphases,stabilizing the stripping and plating of lithium.Consequently,Li//LFP(20 mg cm^(-2))and Li//NCM622(7.4 mg cm^(-2))utilizing iGPCE exhibit stable charge/discharge behaviors.This study offers a fresh approach to accelerate Li~+diffusion kinetics of high-area-loading batteries and suggests broad applicability in other systems.展开更多
Considering large volume variation and dissolution issues of some promising electrode materials for chloride ion batteries(CIB),the construction of solid polymer electrolytes(SPE)for efficient chloride ion transport i...Considering large volume variation and dissolution issues of some promising electrode materials for chloride ion batteries(CIB),the construction of solid polymer electrolytes(SPE)for efficient chloride ion transport is intriguing.However,this is hindered by low ionic conductivity of chloride SPEs and poor cycling performance of CIBs.Herein,an in-situ polymerized and cross-linked poly(ethylene gly-col)diacrylate-based chloride SPE with a low plasticizer content of succinonitrile is designed,yielding a room-temperature ionic conductivity of 7.6×10^(−5) S cm^(−1),which is higher than that of previously re-ported SPEs for CIBs.Moreover,the use of the asprepared SPE achieves an integrated organic cathode with significantly enhanced rate performance and capacity retention of 96.1%after 100 cycles at room temperature,which is much higher than 49.9%(80 cycles)of the cathode in the CIB with a sandwiched structure.These improved properties are also superior to that of other reported cathodes coupled with different chloride SPEs.The chloride ion transfer mechanism of the cathode is revealed by X-ray photo-electron spectroscopy and energy dispersive spectroscopy.展开更多
A polymerized lyotropic liquid crystal monomer of sodium 3,4,5-tris（11-acryloxyundecyloxy）- benzoate was synthesized by a convenient route starting from 3,4,5-trihydroxybenzoic acid via esterification followed by et...A polymerized lyotropic liquid crystal monomer of sodium 3,4,5-tris（11-acryloxyundecyloxy）- benzoate was synthesized by a convenient route starting from 3,4,5-trihydroxybenzoic acid via esterification followed by etherification, acylation and finally neutralization. The chemi- cal structure was confirmed by Fourier transform infrared （FT-IR） and 1H nuclear magnetic resonance spectral analysis. The self-organization behavior of the monomer with deionized water in methanol at room temperature was also demonstrated. The assemblies were char- acterized by polarized optical microscope and X-ray diffraction. The results show that a solution containing 80：20 of the monomer to water was found to be able to self-organize into Lamellar （La） phase and 92：8 with inverted hexagonal （H]I） phase, which was in ac- cordance with the theoretical calculation of critical packing parameter. It suggests that the concentration of the monomer was the key factor to influence assembly structure. Addi- tionally, the acrylate conversion with different photoinitiators and nanostructure retention after polymerization were investigated. The research shows that the acrylate conversion of the monomer with Darocur2959 could reach up to 78% when irradiated by 30 mW/cm2 UV light of 365 nm for 30 min characterized by Real-time FT-IR as well as the sol-gel method. Meanwhile, the La and HII phase nanostructures were both retained after polymerization.展开更多
The bifunctional oxygen catalyst is essential for zinc-air batteries(ZABs).Here,an efficient bifunctional oxygen catalyst,PPcFeCo/3D-G,is obtained throughπ-πinteraction between the conjugated polymerized iron-cobalt...The bifunctional oxygen catalyst is essential for zinc-air batteries(ZABs).Here,an efficient bifunctional oxygen catalyst,PPcFeCo/3D-G,is obtained throughπ-πinteraction between the conjugated polymerized iron-cobalt phthalocyanine(PPcFeCo)with excellent thermal stability and three-dimensional graphene(3D-G).The bimetallic synergistic effect of PPcFeCo,verified by DFT(Density functional theory)calculation,andπ-πinteractions enhances the catalytic activity and durability of the PPcFeCo/3D-G.Regarding electrochemical performance,the PPcFeCo/3D-G with a high electron transfer number(3.98,@0.768 V vs.RHE)has excellent half-wave potential(E_(1/2)=0.890 V vs.RHE)and exhibits outstanding reversibility(ΔE=0.700 V,ΔE=Ej=10-E_(1/2)).The liquid ZAB(LZAB)employed PPcFeCo/3D-G displays a high power density(222 m W cm^(-2)),a specific capacity(792 m A h g-1),and excellent durability(120 h).This work has guiding significance for the preparation of high-efficiency bifunctional catalysts.展开更多
Antiserum against PreS2 peptide was raised with a synthetic polypeptide from the rabbits.The anti-preS2 antibody and polymerized human serum albumin were used as reagents in aradioimmunoassay to detect preS2 and polym...Antiserum against PreS2 peptide was raised with a synthetic polypeptide from the rabbits.The anti-preS2 antibody and polymerized human serum albumin were used as reagents in aradioimmunoassay to detect preS2 and polymerized human serum albumin bindingactivity respectively. Both were absent in patients with hepatitis A or HBsAg negative chronic liver di-seases. In biopsy - proven patients with chronic active hepatitis (CAH)B, prevalences of bothmarkers were significantly higher at exacerbation that at remission stage of the disease, and so werein CAH than in chronic asymptomatic HBV carrier (AsC) with normal histology. Besides, the pre-valences were significantly higher in HBeAg positive group than in anti-HBe positive group.However, the polymerized human serum albumin binding activity and the preS2 were undoubtedlynot the same, as the prevalence of the latter was only 56.7% of the former.展开更多
Water existing in water-absorbing plasma polymerized N-vinyl-2-pyrrolidone(PPNVP) include pure bulk water, freezable water and non-freezing, or bound, water. The C-N bond of N, N-disubstituted amides in PPNVP was cons...Water existing in water-absorbing plasma polymerized N-vinyl-2-pyrrolidone(PPNVP) include pure bulk water, freezable water and non-freezing, or bound, water. The C-N bond of N, N-disubstituted amides in PPNVP was considered as an active binding site for bound water.展开更多
Traditional asphalt rejuvenators,like aromatic oil(AO),are known to be effective in improving the low-temperature properties and fatigue performances of aged SBS(styrene-butadiene-styrene)modified asphalt(SBSMA)binder...Traditional asphalt rejuvenators,like aromatic oil(AO),are known to be effective in improving the low-temperature properties and fatigue performances of aged SBS(styrene-butadiene-styrene)modified asphalt(SBSMA)binders and mixtures.However,these rejuvenators inevitably compromise their high-temperature properties and deformation resistances because they dilute asphalt binder but do not fix the damaged structures of aged SBS.In this study,a highly-active chemical called polymerized 4,4-diphenylmethane diisocyanate(PMDI)was used to assist the traditional AO asphalt rejuvenator.The physical and rheological characteristics of rejuvenated SBSMA binders and the moisture-induced damage and rut deformation performances of corresponding mixtures were comparatively evaluated.The results showed that the increasing proportion of AO compromises the hightemperature property and hardness of aged SBSMA binder,and an appropriate amount of PMDI works to compensate such losses;3%rejuvenator at mass ratio of AO:PMDI=70:30 can have a rejuvenated SBSMA binder with a high-temperature performance similar to that of fresh binder,approximately at 71.4°C;the use of AO can help reduce the viscosity of PMDI rejuvenated SBSMA binder for improving its workability;PMDI can help improve the resistance of AO rejuvenated SBSMA binder to deformation,especially at elevated temperatures,through its chemical reactions with aged SBS;moisture induction can enhance the resistance to damage of rejuvenated mixtures containing AO/PMDI or only PMDI;and the rejuvenator with a mass ratio of AO:PMDI=70:30 can lead the rejuvenated mixture to meet the application requirement,with a rut depth of only 2.973 mm,although more PMDI can result in a higher resistance of rejuvenated mixtures to high-temperature deformation.展开更多
Lanthanum and nitrogen co-doped SrTiO3 was synthesized using polymerized complex method with Ti(OC3H7)4, SrCl2·6H2O and La(NO3)3·6H2O as starting materials followed by calcinations in NH3. Ethylene glycol an...Lanthanum and nitrogen co-doped SrTiO3 was synthesized using polymerized complex method with Ti(OC3H7)4, SrCl2·6H2O and La(NO3)3·6H2O as starting materials followed by calcinations in NH3. Ethylene glycol and anhydrous citric acid were used as the precursors of synthesis. The samples were characterized using XRD, TEM, DRS, BET, EDX and XPS. The cubic-perovskite type of La/N co-doped SrTiO3 nanoparticle could be successfully synthesized. The photocatalytic activity of SrTiO3 for DeNOx ability in visible light region (λ > 510 nm) could be improved by co-doping of La3+ and N3_. The high visible light photocatalytic activity of this substance was caused by a narrow band gap energy that enables to absorb visible light.展开更多
Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the pres...Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads＇ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy （SEM） and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also results in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1：2, DVB content is at the range of 40%-60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydroquinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.展开更多
Lateral flow immunoassays(LFIAs)provide a powerful tool for rapid real-time assay of cancer biomarkers,which is vital for cancer detection and treatment follow-up.Lanthanide-based LFIAs is one of the most widely used ...Lateral flow immunoassays(LFIAs)provide a powerful tool for rapid real-time assay of cancer biomarkers,which is vital for cancer detection and treatment follow-up.Lanthanide-based LFIAs is one of the most widely used methods,especially Eu(Ⅲ)chelates,which possess distinctive and attractive characteristics,such as time-resolved fluorescence and large Stokes shift.Herein,we adopted a new onestep mini-emulsion polymerization method to synthesize carboxyl-modified fluorescent microsphere(OS-EuCM),which shows good stability,resistance to non-specific adhesion and uniform particle size distribution compared with traditional microspheres synthesized through the swelling method.Benefiting from the above advantages,OS-EuCM was successfully used in LFIAs to detect tumor marker Alpha-fetoprotein with high sensitivity and selectivity in concentration as high as 320 ng/mL,as well as a detection limit of 0.683 ng/mL This lanthanide-based microsphere holds great potential for rapid pointof-care screening and clinical application.展开更多
Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)with good electrochemical stability and excellent Li salt solubility are considered as one of the most promising SPEs for solid-state lithium metal batteri...Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)with good electrochemical stability and excellent Li salt solubility are considered as one of the most promising SPEs for solid-state lithium metal batteries(SSLMBs).However,PEO-based SPEs suffer from low ionic conductivity at room temperature and high interfacial resistance with the electrodes due to poor interfacial contact,seriously hindering their practical applications.As an emerging technology,in-situ polymerization process has been widely used in PEO-based SPEs because it can effectively increase Li-ion transport at the interface and improve the interfacial contact between the electrolyte and electrodes.Herein,we review recent advances in design and fabrication of in-situ polymerized PEO-based SPEs to realize enhanced performance in LMBs.The merits and current challenges of various SPEs,as well as their stabilizing strategies are presented.Furthermore,various in-situ polymerization methods(such as free radical polymerization,cationic polymerization,anionic polymerization)for the preparation of PEO-based SPEs are summarized.In addition,the application of in-situ polymerization technology in PEO-based SPEs for adjustment of the functional units and addition of different functional filler materials was systematically discussed to explore the design concepts,methods and working mechanisms.Finally,the challenges and future prospects of in-situ polymerized PEO-based SPEs for SSLMBs are also proposed.展开更多
Volume expansion and polysulfide shuttle effect are the main barriers for the commercialization of lithium-sulfur(Li-S) battery.In this work,we in-situ polymerized a cross-linked binder in sulfur cathode to solve the ...Volume expansion and polysulfide shuttle effect are the main barriers for the commercialization of lithium-sulfur(Li-S) battery.In this work,we in-situ polymerized a cross-linked binder in sulfur cathode to solve the aforementioned problems using a facile method under mild conditions.Polycarbonate diol(PCDL),triethanolamine(TEA) and hexamethylene diisocyanate(HDI) were chosen as precursors to prepare the cross-linked binder.The in-situ polymerized binder(PTH) builds a strong network in sulfur cathode,which could restrain the volume expansion of sulfu r.Moreover,by adopting functional groups of oxygen atoms and nitrogen atoms,the binder could effectively facilitate transportation of Li-ion and adsorb polysulfide chemically.The Li-S battery with bare sulfur and carbon/sulfur composite cathodes and cross-linked PTH binder displays much better electrochemical performance than that of the battery with PVDF.The PTH-bare S cathode with a mass loading of 5.97 mg/cm^2 could deliver a capacity of 733.3 mAh/g at 0.2 C,and remained 585.5 mAh/g after 100 cycles.This in-situ polymerized binder is proved to be quite effective on restraining the volume expansion and suppressing polysulfide shuttle effect,then improving the electrochemical performance of Li-S battery.展开更多
H+ doped polyaniline nanofibre(PH) was synthesized by interfacial polymerization and polyanilines doped with Li salt(PLI and PHLI) were prepared by immersing emeraldine base(EB) and H+ doped polyaniline in 1 mol/L LiP...H+ doped polyaniline nanofibre(PH) was synthesized by interfacial polymerization and polyanilines doped with Li salt(PLI and PHLI) were prepared by immersing emeraldine base(EB) and H+ doped polyaniline in 1 mol/L LiPF6/(EC-EMC-DMC),respectively.PH,PLI and PHLI were all characterized by scanning electron microscopy(SEM) and Fourier transform infrared(FT-IR) spectrometry.With 1 mol/L LiPF6/(EC-EMC-DMC) as electrolyte,PH,PHLI and PLI were used as the active materials of symmetric non-aqueous redox supercapacitors.PLI shows the highest initial specific capacitance of 120 F/g(47 F/g for PH and 66 F/g for PHLI) among three samples.After 500 cycles,the specific capacitance of PLI remains 75 F/g,indicating the good cycleability.展开更多
The correlation between ring-opening polymerization （ROP） of cyclic butylene terephthalate （CBT） and crystallization of polymerized CBT （pCBT） strongly affected the final properties of pCBT and its composites. T...The correlation between ring-opening polymerization （ROP） of cyclic butylene terephthalate （CBT） and crystallization of polymerized CBT （pCBT） strongly affected the final properties of pCBT and its composites. The major objective of this contribution is to pinpoint the threshold temperature between them and the interrelation is successfully disclosed. That is, crystallization during polymerization occurs below 204 ℃ and the crystallization properties of pCBT are determined by this isothermal ROP stage; polymerization and crystallization are gradually separated with the increase of temperature of ROP （Tp） from 204 ℃, and the crystallization properties of pCBT are dominated by cooling stage; only polymerization is performed above 212 ℃. Moreover, quantitative analysis suggests that uniform crystal size distributions and thicker lamellar crystals derive from the stage of crystallization during polymerization. On the contrary, the crystal size distributions become wider above 204 ℃ of Tp and lead to obvious double melting peaks during heating scan. These efforts provide a very useful guide for the related investigation and application of CBT.展开更多
Developing all-solid-state polymer electrolytes(SPEs) with high electrochemical performances and stability is of great importance for exploiting of high energy density and safe batteries. Herein, ether linkage and imi...Developing all-solid-state polymer electrolytes(SPEs) with high electrochemical performances and stability is of great importance for exploiting of high energy density and safe batteries. Herein, ether linkage and imidazolium ionic liquid(ILs) are incorporated into the multi-armed polymer backbone though the series and parallel way. The parallel polymeric ionic liquid(P-P(PEGMA-IM)) maximizes the synergistic effect of ILs and ether linkage, which endowed the material with low crystallinity and high flame retardancy. The P-P(PEGMA-IM) based P-SPE presents a high ionic conductivity of 0.489 m S/cm at 60°C, an excellent lithium-ion transference number of 0.46 and a wide electrochemical window of 4.87 V.The assembled lithium metal battery using P-SPE can deliver a capacity of 151 m Ah/g at 0.2 C, and the capacity retention ratio reaches 82% with a columbic efficiency beyond 99%. The overpotential of P-SPE based symmetric battery is 0.08 V, and there is no apparent magnifying even after 130 h cycling. This new design provides a new avenue for exploitation of advanced SPEs for the next-generation batteries.展开更多
In this paper, a surface plasmon resonance （SPR） sensor chip for detection of bovine serum album （BSA） was prepared by electropolymerization of 3-aminophenylboronic acid （3-APBA） based on molecularly imprinted p...In this paper, a surface plasmon resonance （SPR） sensor chip for detection of bovine serum album （BSA） was prepared by electropolymerization of 3-aminophenylboronic acid （3-APBA） based on molecularly imprinted polymer （MIP） technique. The surface morphology of MIP and non-imprinted （NIP） films were characterized by scanning electroscopy （SEM）. SEM images exhibited nanoscale cavities formed on the MIP films surface homogeneously due to the removal of BSA templates. The effects of pH, ion strength of rebinding BSA, the specific binding and selective recognition were studied for MIP films. Results indicated that the BSA-imprinted films exhibited a good adsorption of template protein （0.02-0.8 mg/mL） in 0.05 mol/L sodium phosphate buffer at pH 5.0 with the limit of detection （LOD） of 0.02 mg/mL.展开更多
基金financially supported by the National Key R&D Program of China(Grant No.2022YFE0207300)National Natural Science Foundation of China(Grant Nos.22179142 and 22075314)+1 种基金Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2024ZB051 and 2023ZB836)the technical support for Nano-X from Suzhou Institute of Nano-Tech and Nano-Bionics,Chinese Academy of Sciences(SINANO).
文摘Solid polymer electrolytes(SPEs)have attracted much attention for their safety,ease of packaging,costeffectiveness,excellent flexibility and stability.Poly-dioxolane(PDOL)is one of the most promising matrix materials of SPEs due to its remarkable compatibility with lithium metal anodes(LMAs)and suitability for in-situ polymerization.However,poor thermal stability,insufficient ionic conductivity and narrow electrochemical stability window(ESW)hinder its further application in lithium metal batteries(LMBs).To ameliorate these problems,we have successfully synthesized a polymerized-ionic-liquid(PIL)monomer named DIMTFSI by modifying DOL with imidazolium cation coupled with TFSI^(-)anion,which simultaneously inherits the lipophilicity of DOL,high ionic conductivity of imidazole,and excellent stability of PILs.Then the tridentate crosslinker trimethylolpropane tris[3-(2-methyl-1-aziridine)propionate](TTMAP)was introduced to regulate the excessive Li^(+)-O coordination and prepare a flame-retardant SPE(DT-SPE)with prominent thermal stability,wide ESW,high ionic conductivity and abundant Lit transference numbers(t_(Li+)).As a result,the LiFePO_(4)|DT-SPE|Li cell exhibits a high initial discharge specific capacity of 149.60 mAh g^(-1)at 0.2C and 30℃with a capacity retention rate of 98.68%after 500 cycles.This work provides new insights into the structural design of PIL-based electrolytes for long-cycling LMBs with high safety and stability.
文摘In this work,by combining the specific selectivity of molecularly imprinted polymer(MIP)with a simple and sensitive electrochemiluminescence(ECL)detection method,a molecularly imprinted ECL sensor for kanamycin(KA)was developed.The MIP film was synthesized on the surface of gold electrode via electrochemical polymerization,using pyrrole(PY)as the functional monomer and KA as the template molecule.The commonly used luminescent reagent Ru(bpy)32+was employed as the ECL probe,and its co-reagent tripropylamine(TPA)was added to enhance the detection sensitivity of the sensor.Quantitative analysis of KA was performed by evaluating the difference in ECL responses between MIP film electrodes after KA removal and KA rebinding.The sensor exhibited high selectivity,good reproducibility,and stability toward KA,with a linear range of 5.00×10^(-8) to 1.00×10^(-5) mol·L^(-1) and a limit of detection of 1.67×10^(-8) mol·L^(-1)(S/N=3).This work would provide a new idea for the development of simple and sensitive molecularly imprinted ECL sensors.
基金the project PNRR-NGEU,which has received funding from the MUR-DM 352/2022.
文摘Gel polymer electrolytes(GPEs)present the best compromise between mechanical and electrochemical properties,as well as an improvement of the cell safety in the framework of Li metal batteries production.However,the polymerization mechanism typically employed relies on the presence of an initiator,and is hindered by oxygen,thus impeding the industrial scale-up of the GPEs production.In this work,an UV-mediated thiol-ene polymerization,employing polyethylene glycol diacrylate(PEGDA)as oligomer,was carried out in a liquid electrolyte solution(1M LiTFSI in EC/DEC)to obtain a self-standing GPE.A comparative study between two different thiol-containing crosslinkers(trimethylolpropane tris(3-mercaptopropionate)-T3 and pentaerythritol tetrakis(3-mercaptopropionate)-T4)was carried out,studying the effects of the crosslinking environment and the GPE production methods on the cell performances.All the produced GPEs present an excellent room temperature ionic conductivity above 1 mS cm^(-1),as well as a wide electrochemical stability window up to 4.59 V.When cycled at a current density of C/10 for more than 250 cycles,all of the tested cells showed a stable cycling profile and a specific capacity>100 mAh g^(-1),indicating the suitability of such processes for up-scaling.
基金the AECS for its financial support of this study
文摘Organosilicone thin films were prepared through plasma polymerization(pp)in a plasma enhance chemical vapour deposition(PECVD)system,utilizing hexamethyldisilazane(HMDSN)as a monomer precursor,at varying distances(25 mm,35 mm,45 mm,55 mm,and 65 mm)from the plasma source to the substrate.Research has examined how the distance between the substrate and plasma source impacts the properties of thin films,including their thickness,surface morphology,and photoluminescence(PL).It was discovered that as the distance increased,both film thickness and PL intensity also increased.Additionally,the film was observed to be more uniform and smoother when deposited 45 mm below the plasma source.
基金supported by the Key Scientific Research Project of Colleges and Universities in Henan(24A480006 and 24A530005)the Natural Science Foundation of Henan Province(242300420337)。
文摘In-situ polymerized solid-state lithium metal batteries have garnered significant attention due to their conformal interface contact and continuous pathways for lithium ion(Li^(+))conduction.However,their electrochemical performance is often hindered by slow Li^(+)transport within high-area-loading cathodes.This study presents an in-situ poly(ε-caprolactone)electrolyte with gradient molar mass(iGPCE)through lithium metal anode(LMA)-induced anionic ring-opening polymerization.Our electrochemical and kinetic analyses reveal that the iGPCE,characterized by low molar mass(M),significantly enhances Li~+diffusion within high-area-loading cathodes and bulk electrolytes,thereby reducing concentration polarization and promoting uniform electrochemical reactions.Moreover,the high M region on LMA side acts as artificial solid electrolyte interphases,stabilizing the stripping and plating of lithium.Consequently,Li//LFP(20 mg cm^(-2))and Li//NCM622(7.4 mg cm^(-2))utilizing iGPCE exhibit stable charge/discharge behaviors.This study offers a fresh approach to accelerate Li~+diffusion kinetics of high-area-loading batteries and suggests broad applicability in other systems.
基金supported by the National Natural Science Foundation of China(No.52222211)“333”Project of Jiangsu Province,and the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Considering large volume variation and dissolution issues of some promising electrode materials for chloride ion batteries(CIB),the construction of solid polymer electrolytes(SPE)for efficient chloride ion transport is intriguing.However,this is hindered by low ionic conductivity of chloride SPEs and poor cycling performance of CIBs.Herein,an in-situ polymerized and cross-linked poly(ethylene gly-col)diacrylate-based chloride SPE with a low plasticizer content of succinonitrile is designed,yielding a room-temperature ionic conductivity of 7.6×10^(−5) S cm^(−1),which is higher than that of previously re-ported SPEs for CIBs.Moreover,the use of the asprepared SPE achieves an integrated organic cathode with significantly enhanced rate performance and capacity retention of 96.1%after 100 cycles at room temperature,which is much higher than 49.9%(80 cycles)of the cathode in the CIB with a sandwiched structure.These improved properties are also superior to that of other reported cathodes coupled with different chloride SPEs.The chloride ion transfer mechanism of the cathode is revealed by X-ray photo-electron spectroscopy and energy dispersive spectroscopy.
文摘A polymerized lyotropic liquid crystal monomer of sodium 3,4,5-tris（11-acryloxyundecyloxy）- benzoate was synthesized by a convenient route starting from 3,4,5-trihydroxybenzoic acid via esterification followed by etherification, acylation and finally neutralization. The chemi- cal structure was confirmed by Fourier transform infrared （FT-IR） and 1H nuclear magnetic resonance spectral analysis. The self-organization behavior of the monomer with deionized water in methanol at room temperature was also demonstrated. The assemblies were char- acterized by polarized optical microscope and X-ray diffraction. The results show that a solution containing 80：20 of the monomer to water was found to be able to self-organize into Lamellar （La） phase and 92：8 with inverted hexagonal （H]I） phase, which was in ac- cordance with the theoretical calculation of critical packing parameter. It suggests that the concentration of the monomer was the key factor to influence assembly structure. Addi- tionally, the acrylate conversion with different photoinitiators and nanostructure retention after polymerization were investigated. The research shows that the acrylate conversion of the monomer with Darocur2959 could reach up to 78% when irradiated by 30 mW/cm2 UV light of 365 nm for 30 min characterized by Real-time FT-IR as well as the sol-gel method. Meanwhile, the La and HII phase nanostructures were both retained after polymerization.
基金financially supported by the National Natural Science Foundation of China(22172093 and 21776167)。
文摘The bifunctional oxygen catalyst is essential for zinc-air batteries(ZABs).Here,an efficient bifunctional oxygen catalyst,PPcFeCo/3D-G,is obtained throughπ-πinteraction between the conjugated polymerized iron-cobalt phthalocyanine(PPcFeCo)with excellent thermal stability and three-dimensional graphene(3D-G).The bimetallic synergistic effect of PPcFeCo,verified by DFT(Density functional theory)calculation,andπ-πinteractions enhances the catalytic activity and durability of the PPcFeCo/3D-G.Regarding electrochemical performance,the PPcFeCo/3D-G with a high electron transfer number(3.98,@0.768 V vs.RHE)has excellent half-wave potential(E_(1/2)=0.890 V vs.RHE)and exhibits outstanding reversibility(ΔE=0.700 V,ΔE=Ej=10-E_(1/2)).The liquid ZAB(LZAB)employed PPcFeCo/3D-G displays a high power density(222 m W cm^(-2)),a specific capacity(792 m A h g-1),and excellent durability(120 h).This work has guiding significance for the preparation of high-efficiency bifunctional catalysts.
文摘Antiserum against PreS2 peptide was raised with a synthetic polypeptide from the rabbits.The anti-preS2 antibody and polymerized human serum albumin were used as reagents in aradioimmunoassay to detect preS2 and polymerized human serum albumin bindingactivity respectively. Both were absent in patients with hepatitis A or HBsAg negative chronic liver di-seases. In biopsy - proven patients with chronic active hepatitis (CAH)B, prevalences of bothmarkers were significantly higher at exacerbation that at remission stage of the disease, and so werein CAH than in chronic asymptomatic HBV carrier (AsC) with normal histology. Besides, the pre-valences were significantly higher in HBeAg positive group than in anti-HBe positive group.However, the polymerized human serum albumin binding activity and the preS2 were undoubtedlynot the same, as the prevalence of the latter was only 56.7% of the former.
文摘Water existing in water-absorbing plasma polymerized N-vinyl-2-pyrrolidone(PPNVP) include pure bulk water, freezable water and non-freezing, or bound, water. The C-N bond of N, N-disubstituted amides in PPNVP was considered as an active binding site for bound water.
基金supported by the Scientific Technology R&D Project of CCCC Asset Management Co.,Ltd.(RP2022015294).
文摘Traditional asphalt rejuvenators,like aromatic oil(AO),are known to be effective in improving the low-temperature properties and fatigue performances of aged SBS(styrene-butadiene-styrene)modified asphalt(SBSMA)binders and mixtures.However,these rejuvenators inevitably compromise their high-temperature properties and deformation resistances because they dilute asphalt binder but do not fix the damaged structures of aged SBS.In this study,a highly-active chemical called polymerized 4,4-diphenylmethane diisocyanate(PMDI)was used to assist the traditional AO asphalt rejuvenator.The physical and rheological characteristics of rejuvenated SBSMA binders and the moisture-induced damage and rut deformation performances of corresponding mixtures were comparatively evaluated.The results showed that the increasing proportion of AO compromises the hightemperature property and hardness of aged SBSMA binder,and an appropriate amount of PMDI works to compensate such losses;3%rejuvenator at mass ratio of AO:PMDI=70:30 can have a rejuvenated SBSMA binder with a high-temperature performance similar to that of fresh binder,approximately at 71.4°C;the use of AO can help reduce the viscosity of PMDI rejuvenated SBSMA binder for improving its workability;PMDI can help improve the resistance of AO rejuvenated SBSMA binder to deformation,especially at elevated temperatures,through its chemical reactions with aged SBS;moisture induction can enhance the resistance to damage of rejuvenated mixtures containing AO/PMDI or only PMDI;and the rejuvenator with a mass ratio of AO:PMDI=70:30 can lead the rejuvenated mixture to meet the application requirement,with a rut depth of only 2.973 mm,although more PMDI can result in a higher resistance of rejuvenated mixtures to high-temperature deformation.
文摘Lanthanum and nitrogen co-doped SrTiO3 was synthesized using polymerized complex method with Ti(OC3H7)4, SrCl2·6H2O and La(NO3)3·6H2O as starting materials followed by calcinations in NH3. Ethylene glycol and anhydrous citric acid were used as the precursors of synthesis. The samples were characterized using XRD, TEM, DRS, BET, EDX and XPS. The cubic-perovskite type of La/N co-doped SrTiO3 nanoparticle could be successfully synthesized. The photocatalytic activity of SrTiO3 for DeNOx ability in visible light region (λ > 510 nm) could be improved by co-doping of La3+ and N3_. The high visible light photocatalytic activity of this substance was caused by a narrow band gap energy that enables to absorb visible light.
基金Natural Science Foundation of Guangdong Province （No.05006556）.
文摘Functional porous microspheres used for the slow release carrier of actives in cosmetics or pharmaceuticals were prepared by modified suspension polymerization of styrene （ST） with divinylbenzene （DVB） in the presence of toluene, cyclohexanol and heptane as porogenic diluents. The use of ultrasonic dispersion decreases the beads＇ size and improves the uniformity. The effects of the porogen mixture, DVB content and solvent extraction on the surface performance of the synthesized beads were studied. The microspheres were characterized by scanning electron microscopy （SEM） and BET surface area determination. It was found that a great proportion of the non-solvating porogen increases the pore diameter and the specific surface area. High DVB concentration also results in the great specific surface area and porosity. When the ratio of toluene/cyclohexanol is 1：2, DVB content is at the range of 40%-60% and methylene chloride was used as extractant, the beads with good spherical shape and pore size were obtained. The prepared porous microspheres were applied as active carriers and showed satisfactory slow release effect. Over 10h constantly sustained release was observed in vitro releasing test for hydroquinone-loaded microspheres. Great surface area promoted high concentration of released hydroquinone.
基金Project supported by the National Key R&D Program of China(2017YFA0205100)。
文摘Lateral flow immunoassays(LFIAs)provide a powerful tool for rapid real-time assay of cancer biomarkers,which is vital for cancer detection and treatment follow-up.Lanthanide-based LFIAs is one of the most widely used methods,especially Eu(Ⅲ)chelates,which possess distinctive and attractive characteristics,such as time-resolved fluorescence and large Stokes shift.Herein,we adopted a new onestep mini-emulsion polymerization method to synthesize carboxyl-modified fluorescent microsphere(OS-EuCM),which shows good stability,resistance to non-specific adhesion and uniform particle size distribution compared with traditional microspheres synthesized through the swelling method.Benefiting from the above advantages,OS-EuCM was successfully used in LFIAs to detect tumor marker Alpha-fetoprotein with high sensitivity and selectivity in concentration as high as 320 ng/mL,as well as a detection limit of 0.683 ng/mL This lanthanide-based microsphere holds great potential for rapid pointof-care screening and clinical application.
基金This work was supported by the Major Science and Technology Projects of Henan Province(221100230200)the National Key Research and Development Program of China(2020YFB1713500)Open Fund of State Key Laboratory of Advanced Refractories(No.SKLAR202210).
文摘Polyethylene oxide(PEO)-based solid polymer electrolytes(SPEs)with good electrochemical stability and excellent Li salt solubility are considered as one of the most promising SPEs for solid-state lithium metal batteries(SSLMBs).However,PEO-based SPEs suffer from low ionic conductivity at room temperature and high interfacial resistance with the electrodes due to poor interfacial contact,seriously hindering their practical applications.As an emerging technology,in-situ polymerization process has been widely used in PEO-based SPEs because it can effectively increase Li-ion transport at the interface and improve the interfacial contact between the electrolyte and electrodes.Herein,we review recent advances in design and fabrication of in-situ polymerized PEO-based SPEs to realize enhanced performance in LMBs.The merits and current challenges of various SPEs,as well as their stabilizing strategies are presented.Furthermore,various in-situ polymerization methods(such as free radical polymerization,cationic polymerization,anionic polymerization)for the preparation of PEO-based SPEs are summarized.In addition,the application of in-situ polymerization technology in PEO-based SPEs for adjustment of the functional units and addition of different functional filler materials was systematically discussed to explore the design concepts,methods and working mechanisms.Finally,the challenges and future prospects of in-situ polymerized PEO-based SPEs for SSLMBs are also proposed.
基金supported by the National Natural Science Foundation of China(No.51672156)Guangdong special support program(No.2015TQ01 N401)+2 种基金Guangdong Province Technical Plan Project(Nos.2017B010119001 and 20178090907005)Shenzhen Technical Plan Project(Nos.JCYJ20170412170706047,JCYJ20170307153806471 and GJHS20170314165324888)Shenzhen Graphene Manufacturing Innovation Center(No.201901161513)。
文摘Volume expansion and polysulfide shuttle effect are the main barriers for the commercialization of lithium-sulfur(Li-S) battery.In this work,we in-situ polymerized a cross-linked binder in sulfur cathode to solve the aforementioned problems using a facile method under mild conditions.Polycarbonate diol(PCDL),triethanolamine(TEA) and hexamethylene diisocyanate(HDI) were chosen as precursors to prepare the cross-linked binder.The in-situ polymerized binder(PTH) builds a strong network in sulfur cathode,which could restrain the volume expansion of sulfu r.Moreover,by adopting functional groups of oxygen atoms and nitrogen atoms,the binder could effectively facilitate transportation of Li-ion and adsorb polysulfide chemically.The Li-S battery with bare sulfur and carbon/sulfur composite cathodes and cross-linked PTH binder displays much better electrochemical performance than that of the battery with PVDF.The PTH-bare S cathode with a mass loading of 5.97 mg/cm^2 could deliver a capacity of 733.3 mAh/g at 0.2 C,and remained 585.5 mAh/g after 100 cycles.This in-situ polymerized binder is proved to be quite effective on restraining the volume expansion and suppressing polysulfide shuttle effect,then improving the electrochemical performance of Li-S battery.
基金Project(2008AA03Z207) supported by the National Hi-tech Research and Development Program of China
文摘H+ doped polyaniline nanofibre(PH) was synthesized by interfacial polymerization and polyanilines doped with Li salt(PLI and PHLI) were prepared by immersing emeraldine base(EB) and H+ doped polyaniline in 1 mol/L LiPF6/(EC-EMC-DMC),respectively.PH,PLI and PHLI were all characterized by scanning electron microscopy(SEM) and Fourier transform infrared(FT-IR) spectrometry.With 1 mol/L LiPF6/(EC-EMC-DMC) as electrolyte,PH,PHLI and PLI were used as the active materials of symmetric non-aqueous redox supercapacitors.PLI shows the highest initial specific capacitance of 120 F/g(47 F/g for PH and 66 F/g for PHLI) among three samples.After 500 cycles,the specific capacitance of PLI remains 75 F/g,indicating the good cycleability.
基金financially supported by the National Natural Science Foundation of China(No.21364004)Gansu Province University Fundamental Research FundsDoctor Research Fund of Lanzhou University of Technology,China
文摘The correlation between ring-opening polymerization （ROP） of cyclic butylene terephthalate （CBT） and crystallization of polymerized CBT （pCBT） strongly affected the final properties of pCBT and its composites. The major objective of this contribution is to pinpoint the threshold temperature between them and the interrelation is successfully disclosed. That is, crystallization during polymerization occurs below 204 ℃ and the crystallization properties of pCBT are determined by this isothermal ROP stage; polymerization and crystallization are gradually separated with the increase of temperature of ROP （Tp） from 204 ℃, and the crystallization properties of pCBT are dominated by cooling stage; only polymerization is performed above 212 ℃. Moreover, quantitative analysis suggests that uniform crystal size distributions and thicker lamellar crystals derive from the stage of crystallization during polymerization. On the contrary, the crystal size distributions become wider above 204 ℃ of Tp and lead to obvious double melting peaks during heating scan. These efforts provide a very useful guide for the related investigation and application of CBT.
基金National Natural Science Foundation of China (No. 51303083)the Natural Science Foundation of Jiangsu Province (No. BK20191293)the Fundamental Research Funds for the Central Universities (No. 30920021123) for financial support。
文摘Developing all-solid-state polymer electrolytes(SPEs) with high electrochemical performances and stability is of great importance for exploiting of high energy density and safe batteries. Herein, ether linkage and imidazolium ionic liquid(ILs) are incorporated into the multi-armed polymer backbone though the series and parallel way. The parallel polymeric ionic liquid(P-P(PEGMA-IM)) maximizes the synergistic effect of ILs and ether linkage, which endowed the material with low crystallinity and high flame retardancy. The P-P(PEGMA-IM) based P-SPE presents a high ionic conductivity of 0.489 m S/cm at 60°C, an excellent lithium-ion transference number of 0.46 and a wide electrochemical window of 4.87 V.The assembled lithium metal battery using P-SPE can deliver a capacity of 151 m Ah/g at 0.2 C, and the capacity retention ratio reaches 82% with a columbic efficiency beyond 99%. The overpotential of P-SPE based symmetric battery is 0.08 V, and there is no apparent magnifying even after 130 h cycling. This new design provides a new avenue for exploitation of advanced SPEs for the next-generation batteries.
基金the National Natural Science Foundation of China(No.20771015)the 111 Project(No.B0712)for the funding
文摘In this paper, a surface plasmon resonance （SPR） sensor chip for detection of bovine serum album （BSA） was prepared by electropolymerization of 3-aminophenylboronic acid （3-APBA） based on molecularly imprinted polymer （MIP） technique. The surface morphology of MIP and non-imprinted （NIP） films were characterized by scanning electroscopy （SEM）. SEM images exhibited nanoscale cavities formed on the MIP films surface homogeneously due to the removal of BSA templates. The effects of pH, ion strength of rebinding BSA, the specific binding and selective recognition were studied for MIP films. Results indicated that the BSA-imprinted films exhibited a good adsorption of template protein （0.02-0.8 mg/mL） in 0.05 mol/L sodium phosphate buffer at pH 5.0 with the limit of detection （LOD） of 0.02 mg/mL.
