Six kinds of polymer ligands, supported on SiO_2, containing coordinating atoms P, S and N respectively, have been synthesized. The Ru(Ⅲ)-Co(Ⅱ) bimetallic complexes of these polymer ligands have been obtained and ex...Six kinds of polymer ligands, supported on SiO_2, containing coordinating atoms P, S and N respectively, have been synthesized. The Ru(Ⅲ)-Co(Ⅱ) bimetallic complexes of these polymer ligands have been obtained and examined as catalysts for the hydroformylation of cyclohexene. The effects of reaction temperature, pressure and Co/Ru ratio etc. on the activities of catalysts were investigated in detail. The catalysts are all polymer-noncarbonyl-metal complexes, easily to be prepared, active and stable. From the experimental results it can be suggested that under reaction conditions such polymer-noncarbonyl-metal complexes convert 'in situ' to polymer-carbonyl-metal complexes, thus become active catalysts. The course of this conversion is supposed as a preliminary approach.展开更多
A series of polymer-supported tetranuclear rhodium carbonyl cluster catalysts were prepared b the reaction of Rh4（CO）12with several kinds of polymer supports such as crosslinked poly （N-vinylpyrrolidone） （PNVP） ...A series of polymer-supported tetranuclear rhodium carbonyl cluster catalysts were prepared b the reaction of Rh4（CO）12with several kinds of polymer supports such as crosslinked poly （N-vinylpyrrolidone） （PNVP） and crosslinked poly （ styrene-co-maleic anhydride） （PMAn）, and subsequently were used to catalyze the hydroformylation of olefins. The catalysts were characterized by IR, SEM and XPS. The influence of the supports structure and crosslinking, metal’s content and particle size of the supports on the catalysts hydroformylation properties was studied. The factors which affect the catalytic conversion were also examined. The experimental results show that the polymer-supported Rh cluster catalysts possess very high catalytic activity and aldehyde selectivity as well as good reproducibility.展开更多
Ring-opening copolymerization of CO_(2) and epoxides is a promising way to manufacture high value-added materials.Despite a variety of catalyst systems have been reported,the reaction is still limited by low activity ...Ring-opening copolymerization of CO_(2) and epoxides is a promising way to manufacture high value-added materials.Despite a variety of catalyst systems have been reported,the reaction is still limited by low activity and polymer selectivity.Herein,a strategy of polymerization-enhanced Lewis acidity is reported to construct a series of highly efficient polymeric aluminum porphyrin catalysts(PAPCs).The characterization of the coordination equilibrium constant(K_(eq))showed significantly enhanced Lewis acidity of PAPC(K_(eg)=18.2 L/mol)compared to the monomeric counterpart(K_(eq)=6.4 L/mol),accompanied with increased turnover frequency(TOF)from 136 h^(-1) to 5500 h^(-1).Through detailed regulation of Lewis acidity,the highly Lewis acidic PAPC-OTs displayed a record high TOF of 30,200 h^(-1) with polymer selectivity of up to 99%.展开更多
Polystyrene-supported hydroquinone （PS-HQ） is presented as an in situ polymeric cocatalyst to replace polystyrenesupported benzoquinone （PS-BQ） in the PdCl2-catalyzed acetalization of methyl acrylate with methanol...Polystyrene-supported hydroquinone （PS-HQ） is presented as an in situ polymeric cocatalyst to replace polystyrenesupported benzoquinone （PS-BQ） in the PdCl2-catalyzed acetalization of methyl acrylate with methanol in supercritical carbon dioxide （scCO2） under oxygen atmosphere. Due to deletion of H2O2 oxidation step, PS-HQ is more convenient and relatively inexpensive.展开更多
Vanadium（III） complexes bearing thiophenol-phosphine ligands （2a-2b） （2-R-6-PPh2-C6H2S） VC12（THF）2 （2a： R = H; 2b： R = MeaSi） were prepared from VCla（THF）3 by treating with 1.0 equiv of the ligand in tet...Vanadium（III） complexes bearing thiophenol-phosphine ligands （2a-2b） （2-R-6-PPh2-C6H2S） VC12（THF）2 （2a： R = H; 2b： R = MeaSi） were prepared from VCla（THF）3 by treating with 1.0 equiv of the ligand in tetrahydrofuran in the presence of excess triethylamine. The two complexes were characterized by FTIR and mass spectra as well as elemental analyses. On activation with Et2AIC1, these complexes exhibited high catalytic activities （up to 22.1 kg PE/（mmolv.h.bar）） even at high temperature （70 ℃）, and produced high molecular weight polymers with unimodal molecular weight distributions, indicating the polymerization took place in a single-site nature. This result may be attributed to benefits of introduction of second-row donor atoms for adjusting charge density of the vanadium centers. In addition, these complexes also exhibited high catalytic activities for ethylene/1-hexene copolymerization. Catalytic activity, comonomer incorporation and polymer molecular weight can be controlled in a wide range by the variation of catalyst structure and the reaction parameters such as A1/V molar ratio, comonomer feed concentration and polymerization reaction temperature.展开更多
A supported iron catalyst, which was prepared by anchoring FeCl2/FeCl3 on the cross-linking macroporous polyacrylate ion exchange resin, was evaluated via the controlled radical polymerization. When a small amount of ...A supported iron catalyst, which was prepared by anchoring FeCl2/FeCl3 on the cross-linking macroporous polyacrylate ion exchange resin, was evaluated via the controlled radical polymerization. When a small amount of CuCl2/ Me6TREN was added, the controllability of the polymerization over the iron-mediated catalyst was significantly improved（Mw/Mn = 1.23-1.73 ）, affording a polymer with a low residual metal via a simple catalyst separation procedure. After suitable regeneration, the supported iron catalyst could also he recycled. UV-Vis analysis showed that the additional copper catalyst could facilitate the radical deactivation process.展开更多
Polymerization of styrene and 1,3-butadiene were performed by calix[4]arene-neodymium complexes using di-n-butylmagnesium and tri-iso-butylaluminum as cocatalyst respectively. The effect of the substituent groups in c...Polymerization of styrene and 1,3-butadiene were performed by calix[4]arene-neodymium complexes using di-n-butylmagnesium and tri-iso-butylaluminum as cocatalyst respectively. The effect of the substituent groups in calix[4]arene on the catalytic activity was first investigated.展开更多
A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecula...A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.展开更多
(Imido)vanadium(V)-alkylidene complexes of type V(CHSiMe3)(NR)(OR?)(PMe3)2 [R = Ad, C6H5, 2,6-Me2C6H3, 2,6-Cl2C6H3;R?= 2,6-Me2C6H3, 2,6-i Pr2C6H3, 2,6-F2C6H3, C6F5, C6Cl5] exhibited from moderate to remarkable catalyt...(Imido)vanadium(V)-alkylidene complexes of type V(CHSiMe3)(NR)(OR?)(PMe3)2 [R = Ad, C6H5, 2,6-Me2C6H3, 2,6-Cl2C6H3;R?= 2,6-Me2C6H3, 2,6-i Pr2C6H3, 2,6-F2C6H3, C6F5, C6Cl5] exhibited from moderate to remarkable catalytic activities for ringopening metathesis polymerization(ROMP) of norbornene(NBE). The catalytic activities were affected by the ligand substituents, and V(CHSiMe3)(N-2,6-Cl2C6H3)(OC6X5)(PMe3)2(X = F, Cl) demonstrated the exceptionally high catalytic activities for ROMP of NBE.The complexes polymerized cycloheptene(CHPE) and cis-cyclooctene(COE), and ROMP of COE by the OC6 Cl5 analogue proceeded in a living manner even at 80℃, and the activity increased with increasing the temperature up to 120 ℃. Highly active catalysts for ROMP of cyclic olefins(NBE, cyclopentene, and CHPE) can be generated in situ by premixing isolated V(CHSiMe3)(NC6F5)(O-2,6-iPr2C6H3)(PMe3)2 with 1.0 equiv. of C6F5OH or C6Cl5OH via immediate phenoxy exchange;the activity was affected by the kind of phenol added [TOF in the ROMPs of NBE: 4.62 × 10^4 min^–1(upon addition of C6F5OH) versus 37.3 min^–1(none)].展开更多
The penta-ether compound was synthesized by the reaction of di（trimethylolpropane） with sodium hydride as the strong base and methyl iodide as the alkyl halide. This compound was characterized by NMR, FTIR, and GC t...The penta-ether compound was synthesized by the reaction of di（trimethylolpropane） with sodium hydride as the strong base and methyl iodide as the alkyl halide. This compound was characterized by NMR, FTIR, and GC techniques. The MgCl_2-supported titanium catalysts were incorporated with varying amounts of penta-ether compound as the internal donor and also the catalysts without the internal donor were synthesized. The synthesized catalysts and the conventional ZieglerNatta catalyst were characterized. The titanium contents were determined by spectrophotometry, magnesium by complexometric titration and chloride by argentometric titration. The effects of the new internal donor on propylene polymerization with the prepared MgCl_2-supported Ziegler-Natta catalysts were investigated and then these results were compared to the results obtained using the conventional diisobutyl phthalate-besed-Ziegler-Natta catalyst. The highest crystallinity degree, melting temperature, and isotacticity of polypropylene were obtained using the catalyst with a pentaether/Mg molar ratio equal to 0.21.展开更多
Propylene slurry polymerization with a MgCl2-supported Ziegler-Natta catalyst containing internal electron donor was conducted after different durations of pre-contact of the catalyst with triethylaluminum cocatalyst....Propylene slurry polymerization with a MgCl2-supported Ziegler-Natta catalyst containing internal electron donor was conducted after different durations of pre-contact of the catalyst with triethylaluminum cocatalyst. The number of active centers([C*]/[Ti])was determined by quenching the polymerization with 2-thiophenecarbonyl chloride and measuring sulfur content in the polymer. The pre-contact treatment caused selective deactivation of a part of active centers with low stereoselectivity and much lower activity in the initial stage of polymerization as compared with the polymerization run without the pre-contact stage. The active center concentration and polymerization activity decreased with prolonging of the pre-contact stage. The proportion of stereoselective active centers was increased by prolonging the pre-contact stage, so the isotacticity of produced polypropylene was enhanced. Release of active centers through catalyst particle fragmentation was significantly retarded, and the polymerization rate curve changed from decay type to induction type by the precontact treatment. In the induction period both non-stereoselective and stereoselective active centers were released and activated, resulting in gradual reduction of the polymer’s isotacticity in the first 5-10 min of polymerization. Selective deactivation of non-stereoselective active centers also took place in propylene polymerization using the catalyst without pre-contacting with the cocatalyst. In this case, the polymerization rate decayed with time after a short induction period of 2-5 min. Over reduction of the active center precursors with low stereoselectivity by triethylaluminum was considered as the reason for their deactivation during the pre-contact or the polymerization processes.展开更多
Polymerizations of linear α-olefins(CnH2n, CH2=CH―R, R = Cn-2) catalyzed by early transition metals typically afford amorphous polymers with alkyl chains(Cn-2), while chain-straightening polymerizations of α-olefin...Polymerizations of linear α-olefins(CnH2n, CH2=CH―R, R = Cn-2) catalyzed by early transition metals typically afford amorphous polymers with alkyl chains(Cn-2), while chain-straightening polymerizations of α-olefins with nickel-based catalysts produce semicrystalline polyolefins. Polymerizations of various α-olefins were carried out using an α-diamine nickel catalyst with a significantly distorted chelating ring. The influences of temperature, monomer concentration, and chain length of α-olefins on polyolefin microstructure were examined in detail. The α-diamine nickel catalyst realized highly regioselective 2,1-insertion of α-olefins regardless of reaction temperature and monomer concentration. Increased chain length of α-olefins led to the formation of more linear polyolefin.Semicrystalline polyolefins with high melting temperatures(Tm) were made from α-olefins through highly regioselective 2,1-insertion and precise chain-straightening.展开更多
Polymerization of 4-vinylpyridine by complex catalyst of neodymium chloride was studied. The influence of Al/Nd (molar ratio), concentration of catalyst, reaction time and temperature on polymerization of 4-vinylpyrid...Polymerization of 4-vinylpyridine by complex catalyst of neodymium chloride was studied. The influence of Al/Nd (molar ratio), concentration of catalyst, reaction time and temperature on polymerization of 4-vinylpyridine was investigated. The results show that different kinds of ligand in the rare earth complex have an effect on the catalytic activity of the complex. The catalytic activity of the rare earth complex is higher than that of simple rare earth chloride. The catalytic activity of polymer-supported catalyst is higher than those of the similar small molecular system.展开更多
A silica-supported Ziegler-Natta catalyst with dimethyldichlorosilane （DMDS） as modifier and small silica as support was successfully prepared and characterized. Results from pilot screen showed that the new catalys...A silica-supported Ziegler-Natta catalyst with dimethyldichlorosilane （DMDS） as modifier and small silica as support was successfully prepared and characterized. Results from pilot screen showed that the new catalyst exhibited higher catalytic activity, better hydrogen response ability and better copolymerization ability than the commercial M catalyst. Pilot screen in ethylene gas phase fluidized bed polymerization, the catalytic activity of the new catalyst was up to 8000 g PE/g cat, which was twice of that of the commercial M catalyst. The bulk density of polyethylene obtained with the new catalyst was 0.38 g/cm^3. The new catalyst is suitable for condensed and super-condensed process in fluidized bed ethylene polymerization.展开更多
A series of new photodegradable poly(furan-amine)s(PFAs) were synthesized by a one-pot, catalyst-free, multicomponent cyclopolymerization between diisocyanides, dialkylacetylene dicarboxylates, and aromatic dialdehyde...A series of new photodegradable poly(furan-amine)s(PFAs) were synthesized by a one-pot, catalyst-free, multicomponent cyclopolymerization between diisocyanides, dialkylacetylene dicarboxylates, and aromatic dialdehydes. All polymerizations were conducted in toluene at 100 ℃ for 6 h without inert gas protection and furnished polymers with a satisfactory molecular weight(Mw up to32200) and yield. The PFA structure was confirmed by spectroscopic techniques, such as GPC, FTIR, and NMR, as well as by comparison with a model compound. The polymers exhibited good solubility in common organic solvents and thermal stability. All the PFAs had high refractive indices in the visible light region(400 nm to 800 nm). Moreover, the PFAs were substantially degraded by UV irradiation due to the presence of furan rings. The film thickness reduction rate could be over 90%.展开更多
The formations of defective MgC12 surfaces, and subsequent adsorption of Ti species and electron donor, as well as propylene polymerization over the Ziegler-Natta catalyst have been investigated using density function...The formations of defective MgC12 surfaces, and subsequent adsorption of Ti species and electron donor, as well as propylene polymerization over the Ziegler-Natta catalyst have been investigated using density functional theory （DFT） method. Twelve possible support models of regular and defective MgC12 （110） and （100） surfaces were built. The individual adsorptions of titanium chlorides as mononuclear or dinuclear, and ethyl benzoate （EB） as electron donor, on these models were evaluated. The analysis of energies presented the cases of EB adsorption were generally more stable than titanium chlorides on both surfaces. Thus, EB as internal electron donor mainly prevented TIC14 from coordinating on the MgC12 surfaces where mostly non-stereospecific active sites could be formed. Exceptionally, A5 the site model with terminal Cl-vacancy on the MgC12 support, presented stronger adsorption of TiCl4 than that of EB on （110） surface. Since the TIC14 and ethyl benzoate （EB） would compete to adsorb on the support surface, it seems reasonable to assume that TIC14 might predominately occupy this site, which can act as the most plausible active site for propylene polymerization. The first insertion of propylene monomer into the A5 active site model showed that it exhibited good regioselectivity but poor stereospecificity in the absence of electron donor.展开更多
An unbridged zirconocene complex bis(1,2-diphenylcyclopentadienyl)zirconium dichloride [(1,2-Ph2-C5H3)2ZrCl2] 1 has been synthesized and structurally characterized. When activated by MAO, 1 produces ultra-high molecul...An unbridged zirconocene complex bis(1,2-diphenylcyclopentadienyl)zirconium dichloride [(1,2-Ph2-C5H3)2ZrCl2] 1 has been synthesized and structurally characterized. When activated by MAO, 1 produces ultra-high molecular weight polyethylene with high melting transition temperature, as well as atactic oligopropylene with average molecular weight of ~1150 g mol-1.展开更多
Synthesis and structure of Ti complex having a pair of chelating aminotropone[O-N]ligand have been reported.Calculations of density functional theory（DFT） studies suggest that bis（aminotropone） Ti complex,when act...Synthesis and structure of Ti complex having a pair of chelating aminotropone[O-N]ligand have been reported.Calculations of density functional theory（DFT） studies suggest that bis（aminotropone） Ti complex,when activated with methylaluminoxane （MAO）,have high potential for the polymerization of olefinic monomers.These theoretical studies also show that the active species derived from bis（aminotropone） Ti catalyst normally possess higher electrophilicity nature compared with those produced using bis（phenoxyimine） Ti complexes（Ti-FI catalysts） which are known as high performance olefin polymerization catalysts. Bis（aminotropone） Ti catalyst generates a catalytically active species that has higher electrophilicity than a Ti-FI catalysts.展开更多
Methyl methacrylate (MMA) was polymerized with the rare earth coordination catalyst system of Nd(O? Pr) 3 in toluene. The influences of various ligands in neodymium complexes, molar ratio of Al/Nd, catalyst concent...Methyl methacrylate (MMA) was polymerized with the rare earth coordination catalyst system of Nd(O? Pr) 3 in toluene. The influences of various ligands in neodymium complexes, molar ratio of Al/Nd, catalyst concentration, catalyst aging time, solvents, the third component CCl 4, temperature and time on the polymerization of MMA were studied. The results showed that the polymerization conversion reached more than 80% at a catalyst concentration of 9 2×10 -3 mol/L. The appropriate molar ratio of CCl 4/Nd was 4. Hydrocarbon was preferred for the polymerzation to obtain a high conversion and a high M W of PMMA. The 1H NMR spectra of PMMA indicated that the lower the temperature, the higher the syndiotactic content of PMMA was obtained.展开更多
Several novel mono（β-enaminoketonato） vanadium complexes bearing constrained [（C6Hs）C6H3C（O）=C（CH2）nCH=N-Ar]VCl2（THF）2 （V3a： n = 1, Ar = C6H5; V4a： n = 2, Ar cyclic skeleton, including C6H5; V4b： n = 2,...Several novel mono（β-enaminoketonato） vanadium complexes bearing constrained [（C6Hs）C6H3C（O）=C（CH2）nCH=N-Ar]VCl2（THF）2 （V3a： n = 1, Ar = C6H5; V4a： n = 2, Ar cyclic skeleton, including C6H5; V4b： n = 2, Ar C6F5; V4c： n = 2, Ar = （C3H7）2C6H3; V5a： n = 3, Ar = C6H5）, were synthesized and their structure and properties were characterized. The structures of V4c and V5a in solid-state were further confirmed by X-ray crystallographic analysis. Density functional theory （DFT） results indicated that these complexes showed enhanced steric hindrance around the metal center as compared with the acyclic analogues. Upon activation with Et2AlCl and in the presence of ethyl trichloroacetate as a reactivator, all of the complexes exhibited high catalytic activities （107 gPE/（molv.h）） toward ethylene polymerization, and the obtained polymers exhibited unimodal distributions （Mw/Mn = 2.0-2.3） even produced at elevated temperatures （70-100 ℃） and prolonged reaction time. When MAO was employed as a cocatalyst, they only showed moderate catalytic activities （10^5 gPE/（molv·h））, but the resulting polymers had higher molecular weights （168-241 kg/mol）. These vanadium complexes with cyclic skeleton also showed high catalytic activities toward ethylene/norbornene copolymerization. The produced copolymers displayed approximate alternating structure at high in-feed concentration of norbornene. The catalytic capabilities of these complexes could be tuned conveniently by varying ligand structure. Furthermore, the cyclic voltammetry results also proved that these complexes exhibited better redox stabilities than the complexes bearing linear skeleton.展开更多
文摘Six kinds of polymer ligands, supported on SiO_2, containing coordinating atoms P, S and N respectively, have been synthesized. The Ru(Ⅲ)-Co(Ⅱ) bimetallic complexes of these polymer ligands have been obtained and examined as catalysts for the hydroformylation of cyclohexene. The effects of reaction temperature, pressure and Co/Ru ratio etc. on the activities of catalysts were investigated in detail. The catalysts are all polymer-noncarbonyl-metal complexes, easily to be prepared, active and stable. From the experimental results it can be suggested that under reaction conditions such polymer-noncarbonyl-metal complexes convert 'in situ' to polymer-carbonyl-metal complexes, thus become active catalysts. The course of this conversion is supposed as a preliminary approach.
基金The project is supported by the National Natural Science Foundation of China.
文摘A series of polymer-supported tetranuclear rhodium carbonyl cluster catalysts were prepared b the reaction of Rh4（CO）12with several kinds of polymer supports such as crosslinked poly （N-vinylpyrrolidone） （PNVP） and crosslinked poly （ styrene-co-maleic anhydride） （PMAn）, and subsequently were used to catalyze the hydroformylation of olefins. The catalysts were characterized by IR, SEM and XPS. The influence of the supports structure and crosslinking, metal’s content and particle size of the supports on the catalysts hydroformylation properties was studied. The factors which affect the catalytic conversion were also examined. The experimental results show that the polymer-supported Rh cluster catalysts possess very high catalytic activity and aldehyde selectivity as well as good reproducibility.
基金supported by National Natural Science Foundation of China(Nos.51988102,22271275,22201280,22101277)Special Project of High-tech Industrialization of Cooperation between Jilin Province and Chinese Academy of Sciences(No.2022SYHz0004)Changchun Science and Technology Development Plan Funding Project(No.21ZY10).
文摘Ring-opening copolymerization of CO_(2) and epoxides is a promising way to manufacture high value-added materials.Despite a variety of catalyst systems have been reported,the reaction is still limited by low activity and polymer selectivity.Herein,a strategy of polymerization-enhanced Lewis acidity is reported to construct a series of highly efficient polymeric aluminum porphyrin catalysts(PAPCs).The characterization of the coordination equilibrium constant(K_(eq))showed significantly enhanced Lewis acidity of PAPC(K_(eg)=18.2 L/mol)compared to the monomeric counterpart(K_(eq)=6.4 L/mol),accompanied with increased turnover frequency(TOF)from 136 h^(-1) to 5500 h^(-1).Through detailed regulation of Lewis acidity,the highly Lewis acidic PAPC-OTs displayed a record high TOF of 30,200 h^(-1) with polymer selectivity of up to 99%.
文摘Polystyrene-supported hydroquinone （PS-HQ） is presented as an in situ polymeric cocatalyst to replace polystyrenesupported benzoquinone （PS-BQ） in the PdCl2-catalyzed acetalization of methyl acrylate with methanol in supercritical carbon dioxide （scCO2） under oxygen atmosphere. Due to deletion of H2O2 oxidation step, PS-HQ is more convenient and relatively inexpensive.
基金supported by the National Natural Science Foundation of China (No. 21234006)
文摘Vanadium（III） complexes bearing thiophenol-phosphine ligands （2a-2b） （2-R-6-PPh2-C6H2S） VC12（THF）2 （2a： R = H; 2b： R = MeaSi） were prepared from VCla（THF）3 by treating with 1.0 equiv of the ligand in tetrahydrofuran in the presence of excess triethylamine. The two complexes were characterized by FTIR and mass spectra as well as elemental analyses. On activation with Et2AIC1, these complexes exhibited high catalytic activities （up to 22.1 kg PE/（mmolv.h.bar）） even at high temperature （70 ℃）, and produced high molecular weight polymers with unimodal molecular weight distributions, indicating the polymerization took place in a single-site nature. This result may be attributed to benefits of introduction of second-row donor atoms for adjusting charge density of the vanadium centers. In addition, these complexes also exhibited high catalytic activities for ethylene/1-hexene copolymerization. Catalytic activity, comonomer incorporation and polymer molecular weight can be controlled in a wide range by the variation of catalyst structure and the reaction parameters such as A1/V molar ratio, comonomer feed concentration and polymerization reaction temperature.
文摘A supported iron catalyst, which was prepared by anchoring FeCl2/FeCl3 on the cross-linking macroporous polyacrylate ion exchange resin, was evaluated via the controlled radical polymerization. When a small amount of CuCl2/ Me6TREN was added, the controllability of the polymerization over the iron-mediated catalyst was significantly improved（Mw/Mn = 1.23-1.73 ）, affording a polymer with a low residual metal via a simple catalyst separation procedure. After suitable regeneration, the supported iron catalyst could also he recycled. UV-Vis analysis showed that the additional copper catalyst could facilitate the radical deactivation process.
文摘Polymerization of styrene and 1,3-butadiene were performed by calix[4]arene-neodymium complexes using di-n-butylmagnesium and tri-iso-butylaluminum as cocatalyst respectively. The effect of the substituent groups in calix[4]arene on the catalytic activity was first investigated.
文摘A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.
基金partly supported by Grant-in-Aid for Scientific Research on Innovative Areas ("3D Active-Site Science", No. 26105003) from The Ministry of Education, Culture, Sports, Science and Technology (MEXT), JapanGrant-in-Aid for Scientific Research from the Japan Society for the Promotion of Science (JSPS, Nos. 15H03812, 18H01982)the Tokyo Metropolitan government (Tokyo Human Resources Fund for City Diplomacy) for pre-doctoral fellowship
文摘(Imido)vanadium(V)-alkylidene complexes of type V(CHSiMe3)(NR)(OR?)(PMe3)2 [R = Ad, C6H5, 2,6-Me2C6H3, 2,6-Cl2C6H3;R?= 2,6-Me2C6H3, 2,6-i Pr2C6H3, 2,6-F2C6H3, C6F5, C6Cl5] exhibited from moderate to remarkable catalytic activities for ringopening metathesis polymerization(ROMP) of norbornene(NBE). The catalytic activities were affected by the ligand substituents, and V(CHSiMe3)(N-2,6-Cl2C6H3)(OC6X5)(PMe3)2(X = F, Cl) demonstrated the exceptionally high catalytic activities for ROMP of NBE.The complexes polymerized cycloheptene(CHPE) and cis-cyclooctene(COE), and ROMP of COE by the OC6 Cl5 analogue proceeded in a living manner even at 80℃, and the activity increased with increasing the temperature up to 120 ℃. Highly active catalysts for ROMP of cyclic olefins(NBE, cyclopentene, and CHPE) can be generated in situ by premixing isolated V(CHSiMe3)(NC6F5)(O-2,6-iPr2C6H3)(PMe3)2 with 1.0 equiv. of C6F5OH or C6Cl5OH via immediate phenoxy exchange;the activity was affected by the kind of phenol added [TOF in the ROMPs of NBE: 4.62 × 10^4 min^–1(upon addition of C6F5OH) versus 37.3 min^–1(none)].
基金financially supported by the Marun Petrochemical Co.,Mahshahr,Iran
文摘The penta-ether compound was synthesized by the reaction of di（trimethylolpropane） with sodium hydride as the strong base and methyl iodide as the alkyl halide. This compound was characterized by NMR, FTIR, and GC techniques. The MgCl_2-supported titanium catalysts were incorporated with varying amounts of penta-ether compound as the internal donor and also the catalysts without the internal donor were synthesized. The synthesized catalysts and the conventional ZieglerNatta catalyst were characterized. The titanium contents were determined by spectrophotometry, magnesium by complexometric titration and chloride by argentometric titration. The effects of the new internal donor on propylene polymerization with the prepared MgCl_2-supported Ziegler-Natta catalysts were investigated and then these results were compared to the results obtained using the conventional diisobutyl phthalate-besed-Ziegler-Natta catalyst. The highest crystallinity degree, melting temperature, and isotacticity of polypropylene were obtained using the catalyst with a pentaether/Mg molar ratio equal to 0.21.
基金financially supported by the National Natural Science Foundation of China (No. 51773178)
文摘Propylene slurry polymerization with a MgCl2-supported Ziegler-Natta catalyst containing internal electron donor was conducted after different durations of pre-contact of the catalyst with triethylaluminum cocatalyst. The number of active centers([C*]/[Ti])was determined by quenching the polymerization with 2-thiophenecarbonyl chloride and measuring sulfur content in the polymer. The pre-contact treatment caused selective deactivation of a part of active centers with low stereoselectivity and much lower activity in the initial stage of polymerization as compared with the polymerization run without the pre-contact stage. The active center concentration and polymerization activity decreased with prolonging of the pre-contact stage. The proportion of stereoselective active centers was increased by prolonging the pre-contact stage, so the isotacticity of produced polypropylene was enhanced. Release of active centers through catalyst particle fragmentation was significantly retarded, and the polymerization rate curve changed from decay type to induction type by the precontact treatment. In the induction period both non-stereoselective and stereoselective active centers were released and activated, resulting in gradual reduction of the polymer’s isotacticity in the first 5-10 min of polymerization. Selective deactivation of non-stereoselective active centers also took place in propylene polymerization using the catalyst without pre-contacting with the cocatalyst. In this case, the polymerization rate decayed with time after a short induction period of 2-5 min. Over reduction of the active center precursors with low stereoselectivity by triethylaluminum was considered as the reason for their deactivation during the pre-contact or the polymerization processes.
基金financially supported by the National Natural Science Foundation of China (Nos. 21674130, 51873234)Natural Science Foundation of Guangdong Province (No. 2017A030310 349)+1 种基金Fundamental Research Funds for the Central Universities (No. 17lgjc02)PetroChina Innovation Foundation (No. 2017D-5007-0505)
文摘Polymerizations of linear α-olefins(CnH2n, CH2=CH―R, R = Cn-2) catalyzed by early transition metals typically afford amorphous polymers with alkyl chains(Cn-2), while chain-straightening polymerizations of α-olefins with nickel-based catalysts produce semicrystalline polyolefins. Polymerizations of various α-olefins were carried out using an α-diamine nickel catalyst with a significantly distorted chelating ring. The influences of temperature, monomer concentration, and chain length of α-olefins on polyolefin microstructure were examined in detail. The α-diamine nickel catalyst realized highly regioselective 2,1-insertion of α-olefins regardless of reaction temperature and monomer concentration. Increased chain length of α-olefins led to the formation of more linear polyolefin.Semicrystalline polyolefins with high melting temperatures(Tm) were made from α-olefins through highly regioselective 2,1-insertion and precise chain-straightening.
文摘Polymerization of 4-vinylpyridine by complex catalyst of neodymium chloride was studied. The influence of Al/Nd (molar ratio), concentration of catalyst, reaction time and temperature on polymerization of 4-vinylpyridine was investigated. The results show that different kinds of ligand in the rare earth complex have an effect on the catalytic activity of the complex. The catalytic activity of the rare earth complex is higher than that of simple rare earth chloride. The catalytic activity of polymer-supported catalyst is higher than those of the similar small molecular system.
基金supported by the Program for New Century Excellent Talents in Universities(NCET-07-0142)the Program for New Century Excellent Talents in Heilongjiang Provincial Universities(NCET-06-010)+1 种基金the National Natural Science Foundation of China(No.20972025)the Science Foundation of Tianjin University of Science & Technology(No.20090420).
文摘A silica-supported Ziegler-Natta catalyst with dimethyldichlorosilane （DMDS） as modifier and small silica as support was successfully prepared and characterized. Results from pilot screen showed that the new catalyst exhibited higher catalytic activity, better hydrogen response ability and better copolymerization ability than the commercial M catalyst. Pilot screen in ethylene gas phase fluidized bed polymerization, the catalytic activity of the new catalyst was up to 8000 g PE/g cat, which was twice of that of the commercial M catalyst. The bulk density of polyethylene obtained with the new catalyst was 0.38 g/cm^3. The new catalyst is suitable for condensed and super-condensed process in fluidized bed ethylene polymerization.
基金financially supported by the National Natural Science Foundation of China (Nos. 21490574, 21875019, 51673024, and 51803009)Beijing Institute of Technology Research Fund Program for Young Scholars
文摘A series of new photodegradable poly(furan-amine)s(PFAs) were synthesized by a one-pot, catalyst-free, multicomponent cyclopolymerization between diisocyanides, dialkylacetylene dicarboxylates, and aromatic dialdehydes. All polymerizations were conducted in toluene at 100 ℃ for 6 h without inert gas protection and furnished polymers with a satisfactory molecular weight(Mw up to32200) and yield. The PFA structure was confirmed by spectroscopic techniques, such as GPC, FTIR, and NMR, as well as by comparison with a model compound. The polymers exhibited good solubility in common organic solvents and thermal stability. All the PFAs had high refractive indices in the visible light region(400 nm to 800 nm). Moreover, the PFAs were substantially degraded by UV irradiation due to the presence of furan rings. The film thickness reduction rate could be over 90%.
基金supported by the Program of Introducing Talents of Discipline to Universities (B08021)Fundamental Research Funds for the Central Universities
文摘The formations of defective MgC12 surfaces, and subsequent adsorption of Ti species and electron donor, as well as propylene polymerization over the Ziegler-Natta catalyst have been investigated using density functional theory （DFT） method. Twelve possible support models of regular and defective MgC12 （110） and （100） surfaces were built. The individual adsorptions of titanium chlorides as mononuclear or dinuclear, and ethyl benzoate （EB） as electron donor, on these models were evaluated. The analysis of energies presented the cases of EB adsorption were generally more stable than titanium chlorides on both surfaces. Thus, EB as internal electron donor mainly prevented TIC14 from coordinating on the MgC12 surfaces where mostly non-stereospecific active sites could be formed. Exceptionally, A5 the site model with terminal Cl-vacancy on the MgC12 support, presented stronger adsorption of TiCl4 than that of EB on （110） surface. Since the TIC14 and ethyl benzoate （EB） would compete to adsorb on the support surface, it seems reasonable to assume that TIC14 might predominately occupy this site, which can act as the most plausible active site for propylene polymerization. The first insertion of propylene monomer into the A5 active site model showed that it exhibited good regioselectivity but poor stereospecificity in the absence of electron donor.
文摘An unbridged zirconocene complex bis(1,2-diphenylcyclopentadienyl)zirconium dichloride [(1,2-Ph2-C5H3)2ZrCl2] 1 has been synthesized and structurally characterized. When activated by MAO, 1 produces ultra-high molecular weight polyethylene with high melting transition temperature, as well as atactic oligopropylene with average molecular weight of ~1150 g mol-1.
文摘Synthesis and structure of Ti complex having a pair of chelating aminotropone[O-N]ligand have been reported.Calculations of density functional theory（DFT） studies suggest that bis（aminotropone） Ti complex,when activated with methylaluminoxane （MAO）,have high potential for the polymerization of olefinic monomers.These theoretical studies also show that the active species derived from bis（aminotropone） Ti catalyst normally possess higher electrophilicity nature compared with those produced using bis（phenoxyimine） Ti complexes（Ti-FI catalysts） which are known as high performance olefin polymerization catalysts. Bis（aminotropone） Ti catalyst generates a catalytically active species that has higher electrophilicity than a Ti-FI catalysts.
文摘Methyl methacrylate (MMA) was polymerized with the rare earth coordination catalyst system of Nd(O? Pr) 3 in toluene. The influences of various ligands in neodymium complexes, molar ratio of Al/Nd, catalyst concentration, catalyst aging time, solvents, the third component CCl 4, temperature and time on the polymerization of MMA were studied. The results showed that the polymerization conversion reached more than 80% at a catalyst concentration of 9 2×10 -3 mol/L. The appropriate molar ratio of CCl 4/Nd was 4. Hydrocarbon was preferred for the polymerzation to obtain a high conversion and a high M W of PMMA. The 1H NMR spectra of PMMA indicated that the lower the temperature, the higher the syndiotactic content of PMMA was obtained.
基金the National Natural Science Foundation of China(No.21234006)China National High-tech R&D Program(No.2015AA034002)
文摘Several novel mono（β-enaminoketonato） vanadium complexes bearing constrained [（C6Hs）C6H3C（O）=C（CH2）nCH=N-Ar]VCl2（THF）2 （V3a： n = 1, Ar = C6H5; V4a： n = 2, Ar cyclic skeleton, including C6H5; V4b： n = 2, Ar C6F5; V4c： n = 2, Ar = （C3H7）2C6H3; V5a： n = 3, Ar = C6H5）, were synthesized and their structure and properties were characterized. The structures of V4c and V5a in solid-state were further confirmed by X-ray crystallographic analysis. Density functional theory （DFT） results indicated that these complexes showed enhanced steric hindrance around the metal center as compared with the acyclic analogues. Upon activation with Et2AlCl and in the presence of ethyl trichloroacetate as a reactivator, all of the complexes exhibited high catalytic activities （107 gPE/（molv.h）） toward ethylene polymerization, and the obtained polymers exhibited unimodal distributions （Mw/Mn = 2.0-2.3） even produced at elevated temperatures （70-100 ℃） and prolonged reaction time. When MAO was employed as a cocatalyst, they only showed moderate catalytic activities （10^5 gPE/（molv·h））, but the resulting polymers had higher molecular weights （168-241 kg/mol）. These vanadium complexes with cyclic skeleton also showed high catalytic activities toward ethylene/norbornene copolymerization. The produced copolymers displayed approximate alternating structure at high in-feed concentration of norbornene. The catalytic capabilities of these complexes could be tuned conveniently by varying ligand structure. Furthermore, the cyclic voltammetry results also proved that these complexes exhibited better redox stabilities than the complexes bearing linear skeleton.
