In order to improve the thermal properties of polylactic acid（PLA） filament,nano-SiO_2 was applied to mix with PLA,then they were spun as composite filament by melt-spinning.The dispersion of nano SiO_2 and the frac...In order to improve the thermal properties of polylactic acid（PLA） filament,nano-SiO_2 was applied to mix with PLA,then they were spun as composite filament by melt-spinning.The dispersion of nano SiO_2 and the fracture surfaces of filaments were studied by scanning electron microscopy（SEM）.The properties of composite filament,such as orientation degree,mechanical properties,and surface friction properties,were analyzed.The thermal performances of composite filament were analyzed by differential scanning calorimetry（DSC） and thermo gravimetric analysis（TGA）.The results showed that the nano-SiO_2 modified by 5% KH-550 could disperse evenly and loosely in nano-scale,and 1 wt% and 3 wt% nano-SiO_2 dispersed throughout PLA evenly.As the quantity of nano-SiO_2 increased,the properties of composite filament,such as orientation degree,friction coefficient,thermal decomposition temperature,and glass transition temperature,increased more or less.The breaking tenacity increased when 1 wt% SiO_2 was added in PLA,but declined when 3 wt% SiO_2 was added.展开更多
The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specim...The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method.The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament.It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens.Time to ignition was found to be much longer in the 3D-printed PLA specimens.Although the maximal heat release rate was a little higher in the PLA than the wood/PLA specimens,the duration of HRR was longer for the wood/PLA specimens.The initial mass of the specimens was smaller in the wood/PLA composites,but during the radiant heat exposure the mass typically decreased slower than in the PLA specimens.展开更多
The increasing demand for sustainable and environmentally friendly materials has driven research towards the development of green composites.In this work,the flax/polylactic acid(PLA)braided yarns were fabricated by b...The increasing demand for sustainable and environmentally friendly materials has driven research towards the development of green composites.In this work,the flax/polylactic acid(PLA)braided yarns were fabricated by braiding PLA filaments with 4 to 24 spindles on flax yarns.After curing at different temperatures(180℃and 190℃),the core/sheath structural flax/PLA composite yarns were manufactured.According to the results of the tensile test,the flax/PLA composite yarn with 4-spindle PLA yarns as a sheath layer and at a curing temperature of 180℃reached the maximum elastic modulus of about(5.79±0.65)GPa and the maximum tensile strength of about(162.17±18.18)MPa.This flax/PLA composite yarn with good mechanical properties would be suitable for green composites in the automobile manufacturing industry and building materials.展开更多
In order to improve the thermal properties of polylactic acid( PLA) master batch,the nano-SiO2 was applied to mixing with PLA. The structure and thermal properties of the composite master batches were studied. The res...In order to improve the thermal properties of polylactic acid( PLA) master batch,the nano-SiO2 was applied to mixing with PLA. The structure and thermal properties of the composite master batches were studied. The results showed that the nano-SiO2 modified by 3% coupling agent KH-570 could be dispersed evenly in PLA in small scale. The thermal decomposition temperature of composite master batches increased by 6. 20-10. 80 ℃, the glass transition temperature increased by 0. 22-5. 16 ℃,and the heat enthalpy at the glass transition temperature increased by 0. 574-2. 437 J /g,compared with pure PLA. The composite master batch possessed superior thermal stability and heat resistance.展开更多
Biodegradable polymers are highly attractive as potential alternatives to petroleum-based polymers in an attempt to achieve carbon neutrality whilst maintaining the mechanical properties of the structures.Among these ...Biodegradable polymers are highly attractive as potential alternatives to petroleum-based polymers in an attempt to achieve carbon neutrality whilst maintaining the mechanical properties of the structures.Among these polymers,polylactic acid(PLA)is particularly promising due to its good mechanical properties,biocompatibility and thermoplasticity.In this work,we aim to enhance the mechanical properties of PLA using mechanically-defibrated cellulose nanofibers(CNFs)that exhibit remarkable mechanical properties and biodegradability.We also employ fused deposition modeling(FDM),one of the three-dimensional printing methods for thermoplastic polymers,for the low-cost fabrication of the products.Mechanically-defibrated CNF-reinforced PLA matrix composites are fabricated by FDM.Their tensile properties are investigated in two printing directions(0°/90°and+45°/-45°).The discussion about the relationship between printing direction and tensile behavoir of mechanically-defibrated CNF-reinforced PLA matrix composite is the unique point of this study.We further discuss the microstructure and fracture surface of mechanically-defibrated CNF-reinforced PLA matrix composite by scanning electron microscope.展开更多
At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional...At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional(3D)printing technology has made a great breakthrough in the clinical application of orthopedic implants.This study explored the combination of 3D printing and tissue engineering to precisely reconstruct the auricle.First,a polylactic acid(PLA)polymer scaffold with a precisely customized patient appearance was fabricated,and then auricle cartilage fragments were loaded into the 3D-printed porous PLA scaffold to promote auricle reconstruction.In vitro,gelatin methacrylamide(GelMA)hydrogels loaded with different sizes of rabbit ear cartilage fragments were studied to assess the regenerative activity of various autologous cartilage fragments.In vivo,rat ear cartilage fragments were placed in an accurately designed porous PLA polymer ear scaffold to promote auricle reconstruction.The results indicated that the chondrocytes in the cartilage fragments could maintain the morphological phenotype in vitro.After three months of implantation observation,it was conducive to promoting the subsequent regeneration of cartilage in vivo.The autologous cartilage fragments combined with 3D printing technology show promising potential in auricle reconstruction.展开更多
With the increasing awareness of environmental protection and rational utilization of resources,natural fiber reinforced composites have shown broad development prospects.Apocynum fiber,known as the“king of wild fibe...With the increasing awareness of environmental protection and rational utilization of resources,natural fiber reinforced composites have shown broad development prospects.Apocynum fiber,known as the“king of wild fiber”,not only has moisture absorption,air permeability,and good mechanical properties but also has many health-related advantages such as antibacterial properties.In this study,four types of needle-punched Apocynum fiber and ramie fiber mat reinforced polylactic acid(PLA)composites were fabricated.Mechanical and thermal properties of the composites were tested and analyzed.The results showed that compared with those of the ramie fiber finish needle-punched mat reinforced composites,the tensile strength and the tensile modulus of Apocynum fiber finish needle-punched mat reinforced composites had increased by 15.3%and 60.1%,respectively.In comparison,the bending strength and the bending modulus were decreased by 21.8%and 7.6%,respectively.Moreover,compared with the Apocynum fiber finish needled-punched mat reinforced composites and the ramie fiber finish needle-punched mat reinforced composites,the Apocynum 50/ramie 50 finish needle-punched mat reinforced composites had the best tensile and bending properties.The after-fracture morphology was detected by a scanning electron microscope(SEM).The thermal properties of the composites were also characterized.It was found that the thermal properties of the four types of composites showed very similar behaviors.展开更多
Organic polymer materials were used as a layer of adhesive into the graphene sheet between the layers to enhance the interaction force between the nano-structure to achieve excellent mechanical properties and barrier ...Organic polymer materials were used as a layer of adhesive into the graphene sheet between the layers to enhance the interaction force between the nano-structure to achieve excellent mechanical properties and barrier properties. PLA with good flowability and easy processing was selected. The mechanical properties and barrier properties of the graphene-based composites were improved by the use of PLA for good flowability, making it easy to enter the GO layer as a binder. Three methods of preparation of GO/PLA homogeneous composite membranes were designed by vacuum filtration. The experimental results show that the injection of PLA as a molecular binder into the GO layer can effectively mimic the nano-structure, and enhance the intergranular force of the graphene molecules and the compatibility with the polymer matrix.展开更多
A novel magnetic nanocarrier was strategically designed and successfully prepared.Photosensitizer 2,7,12,18-tetramethyl-3,8-di-(1-propoxyethyl)-13,17-bis-(3-hydroxypropyl)porphyrin(PHPP)was encapsulated into polylacti...A novel magnetic nanocarrier was strategically designed and successfully prepared.Photosensitizer 2,7,12,18-tetramethyl-3,8-di-(1-propoxyethyl)-13,17-bis-(3-hydroxypropyl)porphyrin(PHPP)was encapsulated into polylactic acid(PLA)-coated Fe3O4 nanoparticles.The diameter of nanocarrier is 30-50 nm by transmission electron micrograph(TEM).The encapsulation efficiency of photosensitizer is 27.98% calculated from UV-vis absorption spectra.The nanocarrier shows obvious photocytotoxic activity to Hela299 tumor cells in vitro.展开更多
Bio plastics products have a rapid growing demand and market across the globe. Polymers synthesized from renewable resources have gained immense popularity, in numerous applications ranging from films, bottles, food p...Bio plastics products have a rapid growing demand and market across the globe. Polymers synthesized from renewable resources have gained immense popularity, in numerous applications ranging from films, bottles, food packaging, drug delivery, bags to agriculture mulch films. Various naturally occurring resources available for starch and PLA extraction and the associated polymer processing techniques are discussed. Alongside some basic concepts on blown film extrusion, the modifications needed for such specialized polymer processing techniques are also explored, giving a comprehensive outlook on bioplastics. Special process analysis, for its application as films are discussed. In the current scenario, as the world aspires for environmental and polymer sustainability, Bioplastic products are of high value. The review article would be beneficial to those embarked on designing bio-plastics products from renewable resources.展开更多
The β-hydroxybutyrate and β-hydroxyvalerate copolymers( PHBV) /polylactic acid( PLA) is a new biocompatible material,which is developed through bacterial fermentation in vivo systems.The PHBV / PLA material could be...The β-hydroxybutyrate and β-hydroxyvalerate copolymers( PHBV) /polylactic acid( PLA) is a new biocompatible material,which is developed through bacterial fermentation in vivo systems.The PHBV / PLA material could be used to make continuous filaments.However,features of artificial blood vessels,especially small diameter vascular grafts made of PHVB / PLA materials are not known.This research are to evaluate and improve weavability of the PHBV / PLA material, and to explore feasibility of using it in artificial blood vessels.Preliminary results showed that weavability of PHBV / PLV was not good,but its weavability could be improved by using methods of weak chemical,such as sizing.In this research,scanning electron microscope( SEM) was adopted to evaluate weavability of PHBV / PLV after sizing and observe surfaces of yarns and fabrics.Also,in order to set proper parameters in heat settings,differential scanning calorimetry( DSC) was used to identify glass transition temperature.展开更多
In the research,a β-hydroxybutyrate and β-hydroxyvalerate copolymer(PHBV)/polylactic acid(PLA)artificial blood vessel was designed and developed,and it was also implanted in vivo for a period of time to observe its ...In the research,a β-hydroxybutyrate and β-hydroxyvalerate copolymer(PHBV)/polylactic acid(PLA)artificial blood vessel was designed and developed,and it was also implanted in vivo for a period of time to observe its biocompatibility and degradation performance.The results showed that the developed PHBV/PLA artificial blood vessel could be used to replace the natural blood vessel,but its degradation rate was too fast and the mechanical supporting force was insufficient.Thus,properties of the PHBV/PLA need to be further improved.展开更多
A new entire biodegradable scaffold has been developed which does not require precellularization before transplantation.This new kind of vascular scaffold prototype made from porous poly-ε-caprolactone( PCL) membrane...A new entire biodegradable scaffold has been developed which does not require precellularization before transplantation.This new kind of vascular scaffold prototype made from porous poly-ε-caprolactone( PCL) membrane to provide three-dimensional environment for cell growth, and embedded with weft-knitted polylactic acid( PLA) fabric to support mechanics.The aim of this paper is to study the variation tendency of mechanical properties with the fabric spacing changing.The basic geometrical parameters were measured to characterize properties of the samples.The tensile and compressive elastic recovery of the samples were tested by the universal mechanical tester and radial compression apparatus,respectively.Both tensile and compressive properties enhanced when reducing the fabric spacing of the composite vascular scaffold.展开更多
This research investigates the mechanical and thermal properties of Morus alba combined with polylactic acid in comparison with other natural fibers. The study uses three different fiber and PLA compositions - 20%, 30...This research investigates the mechanical and thermal properties of Morus alba combined with polylactic acid in comparison with other natural fibers. The study uses three different fiber and PLA compositions - 20%, 30%, and 40% respectively - to produce composite materials. In addition, another composite with the same fiber volume is treated with a 4% NaOH solution to improve mechanical properties. The composites are processed by twin-screw extrusion, granulation, and injection molding. Tensile strength measurements of raw fibers and NaOH-treated fibers were carried out using a single-fiber tensile test with a gauge length of 40 mm. It was observed that the NaOH surface treatment increases the resistance against tensile loading and exhibited improved properties for raw fiber strands. The diameter of the fibers was measured using optical microscopy. During this research, flexural tests, impact tests, differential scanning calorimetry (DSC), and heat deflection temperature measurements (HDT) were conducted to evaluate the mechanical and thermal properties of the developed composite samples. The results indicate that the mechanical properties of NaOH-treated Morus alba-reinforced polylactic acid outperform both virgin PLA samples and untreated Morus alba samples.展开更多
Phase change materials(PCMs)are promising thermal energy storage materials due to their high specific latent heat.Conventional PCMs typically exploit the solid–liquid(s–l)transition.However,leakage and leaching are ...Phase change materials(PCMs)are promising thermal energy storage materials due to their high specific latent heat.Conventional PCMs typically exploit the solid–liquid(s–l)transition.However,leakage and leaching are common issues for solid–liquid PCMs,which have to be addressed before usage in practical applications.In contrast,solid–solid(s–s)PCMs would naturally overcome these issues due to their inherent form stability and homogeneity.In this study,we report a new type of s–s PCM based on chemically linked polyethylene glycol(PEG,the PCM portion)with polylactic acid(PLA,the support portion)in the form of a block co‐polymer.Solid‐solid latent heat of up to 56 J/g could be achieved,with melting points of between 44°C and 55°C.For comparison,PEG was physically mixed into a PLA matrix to form a PEG:PLA composite.However,the composite material saw leakage of up to 9%upon heating,with a corresponding loss in thermal storage capacity.In contrast,the mPEG/PLA block co‐polymers were found to be completely homogeneous and thermally stable even when heated above its phase transition temperature,with no observable leakage,demonstrating the superiority of chemical linking strategies in ensuring form stability.展开更多
3D microgels with various mechanical properties have been important platforms tumor metastasis analysis,and widely adjustable stiffness is crucial for deeper researches.Herein,by mixing biodegradable polylactic acid(P...3D microgels with various mechanical properties have been important platforms tumor metastasis analysis,and widely adjustable stiffness is crucial for deeper researches.Herein,by mixing biodegradable polylactic acid(PLA)nanofibers in the modified alginate with different concentrations of Ca^(2+),we significantly enhance the stiffness range of microgels while retaining the pore size,which provides bionic microenvironment for tumor analysis.As a proof of concept,we simulated the mechanical characteristics of breast tumors by encapsulating cells in 3D microgels with diverse stiffness,and analyzed cellular behaviors of two typical breast cancer cell lines:MCF-7 and SUM-159.Results showed that with the addition of 2.0%(w/v)PLA short nanofibers,the Young’s modulus of modified alginate increased more than three-fold.Besides preserving high survival and proliferation rates,both cells also displayed stronger migration ability in soft microgel spheres,where RT-qPCR analysis revealed the underlying changes at the genetic level.This systematic study demonstrated our method is powerful for creating widely adjustable 3D mechanical microenvironment,and the results of cellular behavior analysis shows its promising application prospects in tumorigenesis and progression.展开更多
To evaluate the biocompatibility of poly（lactic acid/glycolic acid/ asparagic acid-copolyethylene glycol）（PLGA-[ASP-PEG]） tri-block copolymer in vitro, L929 fibroblast was co-cultured with the copolymer for cytoto...To evaluate the biocompatibility of poly（lactic acid/glycolic acid/ asparagic acid-copolyethylene glycol）（PLGA-[ASP-PEG]） tri-block copolymer in vitro, L929 fibroblast was co-cultured with the copolymer for cytotoxicity, hemolysis and pyrogen tests. And, compared with PLGA, the adhesiveness rate of the copolymer was calculated. The experimental results show that the toxicity gradation of the material was 0-1; L929 fibroblasts had a good cell morphology and proliferated rapidly on the surface of the material; hemolysis ratio was 3.08%; there was no pyrogen reaction. The adhesiveness of PLGA-[ASP-PEG] was better than that of the PLGA＇s（P〈0.05）. The results confirm that the PLGA-[ASP-PEG] has a good biocompatibility.展开更多
The development of sustainable and functional biocomposites remains a robust research and industrial claim.Herein,the efficiency of using eco-friendly biochar as reinforcement in Additive Manufacturing(AM)was investig...The development of sustainable and functional biocomposites remains a robust research and industrial claim.Herein,the efficiency of using eco-friendly biochar as reinforcement in Additive Manufacturing(AM)was investigated.Two AM technologies were applied,i.e.,vat photopolymerization(VPP)and material extrusion(MEX).A standard-grade resin in VPP and the also eco-friendly biodegradable Polylactic Acid(PLA)in the MEX process were selected as polymeric matrices.Biochar was prepared in the study from olive trees.Composites were developed for both 3D printing processes at different biochar loadings.Samples were 3D-printed and mechanically tested after international test standards.Thermogravimetric Analysis and Raman revealed the thermal and structural characteristics of the composites.Morphological and fractographic features were derived,among others,with Scanning Electron Microscopy(SEM)and Atomic Force Microscopy(AFM).Biochar was proven to be sufficient reinforcement agent,especially in the filament MEX process,reaching more than 20%improvement at 4 wt.%loading in tensile strength compared to the pure PLA control samples.In the VPP process,results were not as satisfactory,still,a 5%improvement was achieved in the flexural strength with 0.5 wt.%biochar loading.The findings prove the strong potential of biochar-based composites in AM applications,too.展开更多
The aim of the present study was the in vitro and in vivo analysis of a bi-layered 3D-printed scaffold combining a PLA layer and a biphasic PLA/bioglass G5 layer for regeneration of osteochondral defects in vivo Focus...The aim of the present study was the in vitro and in vivo analysis of a bi-layered 3D-printed scaffold combining a PLA layer and a biphasic PLA/bioglass G5 layer for regeneration of osteochondral defects in vivo Focus of the in vitro analysis was on the(molecular)weight loss and the morphological and mechanical variations after immersion in SBF.The in vivo study focused on analysis of the tissue reactions and differences in the implant bed vascularization using an established subcutaneous implantation model in CD-1 mice and established histological and histomorphometrical methods.Both scaffold parts kept their structural integrity,while changes in morphology were observed,especially for the PLA/G5 scaffold.Mechanical properties decreased with progressive degradation,while the PLA/G5 scaffolds presented higher compressive modulus than PLA scaffolds.The tissue reaction to PLA included low numbers of BMGCs and minimal vascularization of its implant beds,while the addition of G5 lead to higher numbers of BMGCs and a higher implant bed vascularization.Analysis revealed that the use of a bi-layered scaffold shows the ability to observe distinct in vivo response despite the physical proximity of PLA and PLA/G5 layers.Altogether,the results showed that the addition of G5 enables to reduce scaffold weight loss and to increase mechanical strength.Furthermore,the addition of G5 lead to a higher vascularization of the implant bed required as basis for bone tissue regeneration mediated by higher numbers of BMGCs,while within the PLA parts a significantly lower vascularization was found optimally for chondral regeneration.Thus,this data show that the analyzed bi-layered scaffold may serve as an ideal basis for the regeneration of osteochondral tissue defects.Additionally,the results show that it might be able to reduce the number of experimental animals required as it may be possible to analyze the tissue response to more than one implant in one experimental animal.展开更多
Prolonged exposure to hot weather and direct sunlight can lead to heat exhaustion and skin irritation,which reduces the productivity of outdoor workers and increases health risks.This study has developed a polylactic ...Prolonged exposure to hot weather and direct sunlight can lead to heat exhaustion and skin irritation,which reduces the productivity of outdoor workers and increases health risks.This study has developed a polylactic acid/boron nitride nanosheet composite fabric by electrospinning.Being selectively modified for hydrophilicity,the fabric has combined passive radiative cooling,thermal conductivity and directional sweat wicking to improve thermal comfort in outdoor environments.Compared to conventional cotton fabrics,the composite fibric exhibits excellent solar reflectance(96%)and infrared heat emissivity(93%),along with high thermal conductivity(0.38 W·m^(−1)·K^(−1)).In outdoor experiments,the composite fabric lowers skin temperature by 2.0℃ under direct sunlight during the day and by 3.8℃ at night relative to bare skin.The composite fabric features a directional perspiration function and an impressive sweat evaporation rate of 1.67 g·h^(−1),which can efficiently transport sweat and heat to the fiber membrane surface to keep the skin dry and cool.This work should advance human thermal management strategies for high-temperature outdoor environments.展开更多
基金Funded by the Shanxi Province Science Foundation for Youths of China[Nos.2014021020-2 and 2015021076]the Shanxi Province Higher School Science and Technology Innovation Project[No.2015125]+2 种基金the Project of Taiyuan University of Technology[Nos.2013T0202013T0212013T022]
文摘In order to improve the thermal properties of polylactic acid（PLA） filament,nano-SiO_2 was applied to mix with PLA,then they were spun as composite filament by melt-spinning.The dispersion of nano SiO_2 and the fracture surfaces of filaments were studied by scanning electron microscopy（SEM）.The properties of composite filament,such as orientation degree,mechanical properties,and surface friction properties,were analyzed.The thermal performances of composite filament were analyzed by differential scanning calorimetry（DSC） and thermo gravimetric analysis（TGA）.The results showed that the nano-SiO_2 modified by 5% KH-550 could disperse evenly and loosely in nano-scale,and 1 wt% and 3 wt% nano-SiO_2 dispersed throughout PLA evenly.As the quantity of nano-SiO_2 increased,the properties of composite filament,such as orientation degree,friction coefficient,thermal decomposition temperature,and glass transition temperature,increased more or less.The breaking tenacity increased when 1 wt% SiO_2 was added in PLA,but declined when 3 wt% SiO_2 was added.
基金would like to thank the Slovenian Research Agency for financial support within the scope of the program P4-0015,as well as BI-CN/18-20-016:Study on the functional properties and thermal safety performance of wood materials and adhesives for 3D printing technology.
文摘The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid(PLA)and wood/PLA filaments were investigated.The reaction to fire of the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method.The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament.It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens.Time to ignition was found to be much longer in the 3D-printed PLA specimens.Although the maximal heat release rate was a little higher in the PLA than the wood/PLA specimens,the duration of HRR was longer for the wood/PLA specimens.The initial mass of the specimens was smaller in the wood/PLA composites,but during the radiant heat exposure the mass typically decreased slower than in the PLA specimens.
基金National Natural Science Foundation of China(No.52273054)Shanghai Natural Science Foundation,China(No.20ZR1402200)。
文摘The increasing demand for sustainable and environmentally friendly materials has driven research towards the development of green composites.In this work,the flax/polylactic acid(PLA)braided yarns were fabricated by braiding PLA filaments with 4 to 24 spindles on flax yarns.After curing at different temperatures(180℃and 190℃),the core/sheath structural flax/PLA composite yarns were manufactured.According to the results of the tensile test,the flax/PLA composite yarn with 4-spindle PLA yarns as a sheath layer and at a curing temperature of 180℃reached the maximum elastic modulus of about(5.79±0.65)GPa and the maximum tensile strength of about(162.17±18.18)MPa.This flax/PLA composite yarn with good mechanical properties would be suitable for green composites in the automobile manufacturing industry and building materials.
基金Shanxi Province Science Foundation for Youths,China(No.2014021020-2)the Projects of Taiyuan University of Technology,China(Nos.2012L074,2013T020,2013T021,and 2013T022)Shanxi Province College Students Training Program,China(No.2013067)
文摘In order to improve the thermal properties of polylactic acid( PLA) master batch,the nano-SiO2 was applied to mixing with PLA. The structure and thermal properties of the composite master batches were studied. The results showed that the nano-SiO2 modified by 3% coupling agent KH-570 could be dispersed evenly in PLA in small scale. The thermal decomposition temperature of composite master batches increased by 6. 20-10. 80 ℃, the glass transition temperature increased by 0. 22-5. 16 ℃,and the heat enthalpy at the glass transition temperature increased by 0. 574-2. 437 J /g,compared with pure PLA. The composite master batch possessed superior thermal stability and heat resistance.
基金supported by the Program for Creation of Interdisciplinary Research and Ensemble Program of Frontier Research Institute for Interdisciplinary Sciences,Tohoku University。
文摘Biodegradable polymers are highly attractive as potential alternatives to petroleum-based polymers in an attempt to achieve carbon neutrality whilst maintaining the mechanical properties of the structures.Among these polymers,polylactic acid(PLA)is particularly promising due to its good mechanical properties,biocompatibility and thermoplasticity.In this work,we aim to enhance the mechanical properties of PLA using mechanically-defibrated cellulose nanofibers(CNFs)that exhibit remarkable mechanical properties and biodegradability.We also employ fused deposition modeling(FDM),one of the three-dimensional printing methods for thermoplastic polymers,for the low-cost fabrication of the products.Mechanically-defibrated CNF-reinforced PLA matrix composites are fabricated by FDM.Their tensile properties are investigated in two printing directions(0°/90°and+45°/-45°).The discussion about the relationship between printing direction and tensile behavoir of mechanically-defibrated CNF-reinforced PLA matrix composite is the unique point of this study.We further discuss the microstructure and fracture surface of mechanically-defibrated CNF-reinforced PLA matrix composite by scanning electron microscope.
基金supported by the National Natural Science Foundation of China(No.81171731)the Project of Chengdu Science and Technology Bureau(Nos.2021-YF05-01619-SN and 2021-RC05-00022-CG)+2 种基金the Science and Technology Project of Tibet Autonomous Region(Nos.XZ202202YD0013C and XZ201901-GB-08)the Sichuan Science and Technology Program(No.2022YFG0066)the 1·3·5 Project for Disciplines of Excellence,West China Hospital,Sichuan University(Nos.ZYJC21026,ZYGD21001 and ZYJC21077).
文摘At present,the clinical reconstruction of the auricle usually adopts the strategy of taking autologous costal cartilage.This method has great trauma to patients,poor plasticity and inaccurate shaping.Three-dimensional(3D)printing technology has made a great breakthrough in the clinical application of orthopedic implants.This study explored the combination of 3D printing and tissue engineering to precisely reconstruct the auricle.First,a polylactic acid(PLA)polymer scaffold with a precisely customized patient appearance was fabricated,and then auricle cartilage fragments were loaded into the 3D-printed porous PLA scaffold to promote auricle reconstruction.In vitro,gelatin methacrylamide(GelMA)hydrogels loaded with different sizes of rabbit ear cartilage fragments were studied to assess the regenerative activity of various autologous cartilage fragments.In vivo,rat ear cartilage fragments were placed in an accurately designed porous PLA polymer ear scaffold to promote auricle reconstruction.The results indicated that the chondrocytes in the cartilage fragments could maintain the morphological phenotype in vitro.After three months of implantation observation,it was conducive to promoting the subsequent regeneration of cartilage in vivo.The autologous cartilage fragments combined with 3D printing technology show promising potential in auricle reconstruction.
基金National Natural Science Foundation of China(No.50803010)Natural Science Foundation of Shanghai,China(No.14ZR1400100)。
文摘With the increasing awareness of environmental protection and rational utilization of resources,natural fiber reinforced composites have shown broad development prospects.Apocynum fiber,known as the“king of wild fiber”,not only has moisture absorption,air permeability,and good mechanical properties but also has many health-related advantages such as antibacterial properties.In this study,four types of needle-punched Apocynum fiber and ramie fiber mat reinforced polylactic acid(PLA)composites were fabricated.Mechanical and thermal properties of the composites were tested and analyzed.The results showed that compared with those of the ramie fiber finish needle-punched mat reinforced composites,the tensile strength and the tensile modulus of Apocynum fiber finish needle-punched mat reinforced composites had increased by 15.3%and 60.1%,respectively.In comparison,the bending strength and the bending modulus were decreased by 21.8%and 7.6%,respectively.Moreover,compared with the Apocynum fiber finish needled-punched mat reinforced composites and the ramie fiber finish needle-punched mat reinforced composites,the Apocynum 50/ramie 50 finish needle-punched mat reinforced composites had the best tensile and bending properties.The after-fracture morphology was detected by a scanning electron microscope(SEM).The thermal properties of the composites were also characterized.It was found that the thermal properties of the four types of composites showed very similar behaviors.
基金the National Natural Science Foundation of China(No.51675491)
文摘Organic polymer materials were used as a layer of adhesive into the graphene sheet between the layers to enhance the interaction force between the nano-structure to achieve excellent mechanical properties and barrier properties. PLA with good flowability and easy processing was selected. The mechanical properties and barrier properties of the graphene-based composites were improved by the use of PLA for good flowability, making it easy to enter the GO layer as a binder. Three methods of preparation of GO/PLA homogeneous composite membranes were designed by vacuum filtration. The experimental results show that the injection of PLA as a molecular binder into the GO layer can effectively mimic the nano-structure, and enhance the intergranular force of the graphene molecules and the compatibility with the polymer matrix.
基金National Natural Science Foundations of China(No.30070862,No.30271534)Shanghai Municipal Natural Science Foundation,China(No.05ZR14002,No.06PJ14001,No.064319020,No.108146)the FundamentalResearch Funds for the Central Universities,China(No.10D10514)
文摘A novel magnetic nanocarrier was strategically designed and successfully prepared.Photosensitizer 2,7,12,18-tetramethyl-3,8-di-(1-propoxyethyl)-13,17-bis-(3-hydroxypropyl)porphyrin(PHPP)was encapsulated into polylactic acid(PLA)-coated Fe3O4 nanoparticles.The diameter of nanocarrier is 30-50 nm by transmission electron micrograph(TEM).The encapsulation efficiency of photosensitizer is 27.98% calculated from UV-vis absorption spectra.The nanocarrier shows obvious photocytotoxic activity to Hela299 tumor cells in vitro.
文摘Bio plastics products have a rapid growing demand and market across the globe. Polymers synthesized from renewable resources have gained immense popularity, in numerous applications ranging from films, bottles, food packaging, drug delivery, bags to agriculture mulch films. Various naturally occurring resources available for starch and PLA extraction and the associated polymer processing techniques are discussed. Alongside some basic concepts on blown film extrusion, the modifications needed for such specialized polymer processing techniques are also explored, giving a comprehensive outlook on bioplastics. Special process analysis, for its application as films are discussed. In the current scenario, as the world aspires for environmental and polymer sustainability, Bioplastic products are of high value. The review article would be beneficial to those embarked on designing bio-plastics products from renewable resources.
文摘The β-hydroxybutyrate and β-hydroxyvalerate copolymers( PHBV) /polylactic acid( PLA) is a new biocompatible material,which is developed through bacterial fermentation in vivo systems.The PHBV / PLA material could be used to make continuous filaments.However,features of artificial blood vessels,especially small diameter vascular grafts made of PHVB / PLA materials are not known.This research are to evaluate and improve weavability of the PHBV / PLA material, and to explore feasibility of using it in artificial blood vessels.Preliminary results showed that weavability of PHBV / PLV was not good,but its weavability could be improved by using methods of weak chemical,such as sizing.In this research,scanning electron microscope( SEM) was adopted to evaluate weavability of PHBV / PLV after sizing and observe surfaces of yarns and fabrics.Also,in order to set proper parameters in heat settings,differential scanning calorimetry( DSC) was used to identify glass transition temperature.
基金"111 Project" Biomedical Textile Materials Science and Technology,China(No.B07024)
文摘In the research,a β-hydroxybutyrate and β-hydroxyvalerate copolymer(PHBV)/polylactic acid(PLA)artificial blood vessel was designed and developed,and it was also implanted in vivo for a period of time to observe its biocompatibility and degradation performance.The results showed that the developed PHBV/PLA artificial blood vessel could be used to replace the natural blood vessel,but its degradation rate was too fast and the mechanical supporting force was insufficient.Thus,properties of the PHBV/PLA need to be further improved.
基金the Fundamental Research Funds for the Central Universities,China，National Natural Science Foundation of China，"111 Project" Biomedical Textile Materials Science and Technology,China，the Donghua University Innovation Fund of Graduate Project,China
文摘A new entire biodegradable scaffold has been developed which does not require precellularization before transplantation.This new kind of vascular scaffold prototype made from porous poly-ε-caprolactone( PCL) membrane to provide three-dimensional environment for cell growth, and embedded with weft-knitted polylactic acid( PLA) fabric to support mechanics.The aim of this paper is to study the variation tendency of mechanical properties with the fabric spacing changing.The basic geometrical parameters were measured to characterize properties of the samples.The tensile and compressive elastic recovery of the samples were tested by the universal mechanical tester and radial compression apparatus,respectively.Both tensile and compressive properties enhanced when reducing the fabric spacing of the composite vascular scaffold.
文摘This research investigates the mechanical and thermal properties of Morus alba combined with polylactic acid in comparison with other natural fibers. The study uses three different fiber and PLA compositions - 20%, 30%, and 40% respectively - to produce composite materials. In addition, another composite with the same fiber volume is treated with a 4% NaOH solution to improve mechanical properties. The composites are processed by twin-screw extrusion, granulation, and injection molding. Tensile strength measurements of raw fibers and NaOH-treated fibers were carried out using a single-fiber tensile test with a gauge length of 40 mm. It was observed that the NaOH surface treatment increases the resistance against tensile loading and exhibited improved properties for raw fiber strands. The diameter of the fibers was measured using optical microscopy. During this research, flexural tests, impact tests, differential scanning calorimetry (DSC), and heat deflection temperature measurements (HDT) were conducted to evaluate the mechanical and thermal properties of the developed composite samples. The results indicate that the mechanical properties of NaOH-treated Morus alba-reinforced polylactic acid outperform both virgin PLA samples and untreated Morus alba samples.
基金Science and Engineering Research Council,Grant/Award Number:GAP/2019/00314。
文摘Phase change materials(PCMs)are promising thermal energy storage materials due to their high specific latent heat.Conventional PCMs typically exploit the solid–liquid(s–l)transition.However,leakage and leaching are common issues for solid–liquid PCMs,which have to be addressed before usage in practical applications.In contrast,solid–solid(s–s)PCMs would naturally overcome these issues due to their inherent form stability and homogeneity.In this study,we report a new type of s–s PCM based on chemically linked polyethylene glycol(PEG,the PCM portion)with polylactic acid(PLA,the support portion)in the form of a block co‐polymer.Solid‐solid latent heat of up to 56 J/g could be achieved,with melting points of between 44°C and 55°C.For comparison,PEG was physically mixed into a PLA matrix to form a PEG:PLA composite.However,the composite material saw leakage of up to 9%upon heating,with a corresponding loss in thermal storage capacity.In contrast,the mPEG/PLA block co‐polymers were found to be completely homogeneous and thermally stable even when heated above its phase transition temperature,with no observable leakage,demonstrating the superiority of chemical linking strategies in ensuring form stability.
基金supported by the National Natural Science Foundation of China(Nos.22034005,81973569,and 21621003).
文摘3D microgels with various mechanical properties have been important platforms tumor metastasis analysis,and widely adjustable stiffness is crucial for deeper researches.Herein,by mixing biodegradable polylactic acid(PLA)nanofibers in the modified alginate with different concentrations of Ca^(2+),we significantly enhance the stiffness range of microgels while retaining the pore size,which provides bionic microenvironment for tumor analysis.As a proof of concept,we simulated the mechanical characteristics of breast tumors by encapsulating cells in 3D microgels with diverse stiffness,and analyzed cellular behaviors of two typical breast cancer cell lines:MCF-7 and SUM-159.Results showed that with the addition of 2.0%(w/v)PLA short nanofibers,the Young’s modulus of modified alginate increased more than three-fold.Besides preserving high survival and proliferation rates,both cells also displayed stronger migration ability in soft microgel spheres,where RT-qPCR analysis revealed the underlying changes at the genetic level.This systematic study demonstrated our method is powerful for creating widely adjustable 3D mechanical microenvironment,and the results of cellular behavior analysis shows its promising application prospects in tumorigenesis and progression.
基金the National Natural Science Foundation of China(No.30200063,30470483,30170270)the Excellent Youth Foundation of Wuhan Science and Technology Committee(No. 20045006071-10)
文摘To evaluate the biocompatibility of poly（lactic acid/glycolic acid/ asparagic acid-copolyethylene glycol）（PLGA-[ASP-PEG]） tri-block copolymer in vitro, L929 fibroblast was co-cultured with the copolymer for cytotoxicity, hemolysis and pyrogen tests. And, compared with PLGA, the adhesiveness rate of the copolymer was calculated. The experimental results show that the toxicity gradation of the material was 0-1; L929 fibroblasts had a good cell morphology and proliferated rapidly on the surface of the material; hemolysis ratio was 3.08%; there was no pyrogen reaction. The adhesiveness of PLGA-[ASP-PEG] was better than that of the PLGA＇s（P〈0.05）. The results confirm that the PLGA-[ASP-PEG] has a good biocompatibility.
文摘The development of sustainable and functional biocomposites remains a robust research and industrial claim.Herein,the efficiency of using eco-friendly biochar as reinforcement in Additive Manufacturing(AM)was investigated.Two AM technologies were applied,i.e.,vat photopolymerization(VPP)and material extrusion(MEX).A standard-grade resin in VPP and the also eco-friendly biodegradable Polylactic Acid(PLA)in the MEX process were selected as polymeric matrices.Biochar was prepared in the study from olive trees.Composites were developed for both 3D printing processes at different biochar loadings.Samples were 3D-printed and mechanically tested after international test standards.Thermogravimetric Analysis and Raman revealed the thermal and structural characteristics of the composites.Morphological and fractographic features were derived,among others,with Scanning Electron Microscopy(SEM)and Atomic Force Microscopy(AFM).Biochar was proven to be sufficient reinforcement agent,especially in the filament MEX process,reaching more than 20%improvement at 4 wt.%loading in tensile strength compared to the pure PLA control samples.In the VPP process,results were not as satisfactory,still,a 5%improvement was achieved in the flexural strength with 0.5 wt.%biochar loading.The findings prove the strong potential of biochar-based composites in AM applications,too.
基金We thank the Spanish MINECO for supporting the project MAT2012-38793 and for funding MN through the Ramon y Cajal program and TS through the“Personal Tecnico de Apoyo”subprogram.
文摘The aim of the present study was the in vitro and in vivo analysis of a bi-layered 3D-printed scaffold combining a PLA layer and a biphasic PLA/bioglass G5 layer for regeneration of osteochondral defects in vivo Focus of the in vitro analysis was on the(molecular)weight loss and the morphological and mechanical variations after immersion in SBF.The in vivo study focused on analysis of the tissue reactions and differences in the implant bed vascularization using an established subcutaneous implantation model in CD-1 mice and established histological and histomorphometrical methods.Both scaffold parts kept their structural integrity,while changes in morphology were observed,especially for the PLA/G5 scaffold.Mechanical properties decreased with progressive degradation,while the PLA/G5 scaffolds presented higher compressive modulus than PLA scaffolds.The tissue reaction to PLA included low numbers of BMGCs and minimal vascularization of its implant beds,while the addition of G5 lead to higher numbers of BMGCs and a higher implant bed vascularization.Analysis revealed that the use of a bi-layered scaffold shows the ability to observe distinct in vivo response despite the physical proximity of PLA and PLA/G5 layers.Altogether,the results showed that the addition of G5 enables to reduce scaffold weight loss and to increase mechanical strength.Furthermore,the addition of G5 lead to a higher vascularization of the implant bed required as basis for bone tissue regeneration mediated by higher numbers of BMGCs,while within the PLA parts a significantly lower vascularization was found optimally for chondral regeneration.Thus,this data show that the analyzed bi-layered scaffold may serve as an ideal basis for the regeneration of osteochondral tissue defects.Additionally,the results show that it might be able to reduce the number of experimental animals required as it may be possible to analyze the tissue response to more than one implant in one experimental animal.
文摘Prolonged exposure to hot weather and direct sunlight can lead to heat exhaustion and skin irritation,which reduces the productivity of outdoor workers and increases health risks.This study has developed a polylactic acid/boron nitride nanosheet composite fabric by electrospinning.Being selectively modified for hydrophilicity,the fabric has combined passive radiative cooling,thermal conductivity and directional sweat wicking to improve thermal comfort in outdoor environments.Compared to conventional cotton fabrics,the composite fibric exhibits excellent solar reflectance(96%)and infrared heat emissivity(93%),along with high thermal conductivity(0.38 W·m^(−1)·K^(−1)).In outdoor experiments,the composite fabric lowers skin temperature by 2.0℃ under direct sunlight during the day and by 3.8℃ at night relative to bare skin.The composite fabric features a directional perspiration function and an impressive sweat evaporation rate of 1.67 g·h^(−1),which can efficiently transport sweat and heat to the fiber membrane surface to keep the skin dry and cool.This work should advance human thermal management strategies for high-temperature outdoor environments.
