Chemical modification of polymers represents a pivotal method for achieving functionalized polymer materials.However,due to the lack of post-functional handle,the chemical modification of polyester materials remains a...Chemical modification of polymers represents a pivotal method for achieving functionalized polymer materials.However,due to the lack of post-functional handle,the chemical modification of polyester materials remains a significant challenge.Ring-opening copolymerization of cyclic anhydride and epoxides is a powerful approach to synthesize polyesters.In this work,we for the first time demonstrate the functionalizability of polyesters synthesized with brominated anhydride monomers.The post-functionalization is amenable to a wide variety of reactive groups and reactions with high yields.With multiple well-established functionalization pathways of brominated polyester materials and optimized the conditions for the modification reactions,a series of functionalized polyester materials can be obtained with high yields,providing new insights for the research about functionalization of polymers.展开更多
To enhance the properties of bio-based polyesters,enabling them to more closely mimic the characteristics of terephthalate-based materials,a series of aliphatic-aromatic copolyesters(P_(1)–P_(4))were synthesized via ...To enhance the properties of bio-based polyesters,enabling them to more closely mimic the characteristics of terephthalate-based materials,a series of aliphatic-aromatic copolyesters(P_(1)–P_(4))were synthesized via melt polycondensation.Diester monomers M and N were synthesized via the Williamson reaction,using lignin-derived 2-methoxyhydroquinone,methyl 4-chloromethylbenzoate,and methyl chloroacetate as starting materials.Hydroquinone bis(2-hydroxyethyl)ether(HQEE)and 1,4-cyclohexanedimethanol(CHDM)were employed as cyclic segments,while 1,4-butanediol(BDO)and 1,6-hexanediol(HDO)served as alkyl segments within the copolymer structures.The novel copolyesters exhibited molecular weights(Mw)in the range of 5.25×10^(4)–5.87×10^(4) g/mol,with polydispersity indices spanning from 2.50–2.66.Evaluation of the structural and thermomechanical properties indicated that the inclusion of alkyl segments induced a reduction in both crystallinity and molecular weight,while significantly improving the flexibility,whereas cyclic segments enhanced the processability of the copolyesters.Copolyesters P_(1) and P_(2),due to the presence of rigid segments(HQEE and CHDM),displayed relatively high glass transition temperatures(Tg>80℃)and melting temperatures(Tm>170℃).Notably,P_(2),incorporating CHDM,exhibited superior elongation properties(272%),attributed to the enhanced chain mobility resulting from its trans-conformation,while P_(1) was found to be likely brittle owing to excessive chain stiffness.Biodegradability assessment using earthworms as bioindicators revealed that the copolyesters demonstrated moderate degradation profiles,with P_(2) exhibiting a degradation rate of 4.82%,followed by P_(4) at 4.07%,P_(3) at 3.65%,and P_(1) at 3.17%.The higher degradation rate of P_(2) was attributed to its relatively larger d-spacing and lower toxicity,which facilitated enzymatic hydrolytic attack by microorganisms.These findings highlight the significance of optimizing the structural chain segments within aliphatic-aromatic copolyesters.By doing so,it is possible to significantly enhance their properties and performance,offering viable bio-based alternatives to petroleum-based polyesters such as polyethylene terephthalate(PET).展开更多
The asymmetric alternating copolymerization of meso-epoxide and cyclic anhydrides provides an efficient access to enantiopure polyesters.Contrary to the extensive investigation of the stereochemistry resulting from ep...The asymmetric alternating copolymerization of meso-epoxide and cyclic anhydrides provides an efficient access to enantiopure polyesters.Contrary to the extensive investigation of the stereochemistry resulting from epoxide building block,the chirality from anhydride and the configurational match with epoxide remain elusive.Herein,we discover that the bimetallic chromium catalysts have led to an obvious enhancement in terms of reactivity and enantioselectivity for the asymmetric copolymerization of meso-epoxide with various non-symmetric chiral anhydrides.Up to 97%ee was obtained during the asymmetric copolymerization of cyclohexene oxide(CHO)with(R)-methylsuccinic anhydride(R-MSA),and three-or four-carbon chiral centers were simultaneously installed in the aliphatic polyester backbone.In particular,the different combinations of stereochemistry in epoxide and anhydride building blocks considerably affect the thermal properties and crystalline behaviors of the resulting polyesters.This study uncovers an interesting method for regulating polymer crystallinity via matching the chirality of different monomers.展开更多
The thermotropic liquid crystal polyester(TLCP)fiber is an increasingly important strategic high-performance fiber.In this paper,the TLCP was prepared by two-step melt polymerization using 4-hydroxybenzoic acid(HBA)an...The thermotropic liquid crystal polyester(TLCP)fiber is an increasingly important strategic high-performance fiber.In this paper,the TLCP was prepared by two-step melt polymerization using 4-hydroxybenzoic acid(HBA)and 6-hydroxy-2-naphthoic acid(HNA)as comonomers at a molar ratio of 7∶3.The structure of TLCP was confirmed by the Fourier transform infrared(FTIR)spectrometer and nuclear magnetic resonance(NMR)spectrometer.The thermal and rheological properties of TLCP before and after heat treatment were analyzed systematically by the differential scanning calorimeter(DSC),dynamic mechanical analyzer(DMA)and high-temperature rotational rheometer.The results revealed that the melting temperature,glass transition temperature and melt viscosity of the TLCP increased significantly after heat treatment.It indicates that the crystallization of the TLCP is perfect,and solid-phase condensation occurs during heat treatment,which increases its molecular mass.In conclusion,heat treatment at a temperature below but close to the melting temperature can effectively regulate the structure and properties of the TLCP,and the results of this study can provide a reference for the high strengthening of TLCP fibers.展开更多
A wide variety of different types of microorganisms are known to produce intracellular energy and carbon storage products, which have been generally described as being poly (β-hydroxybutyrate), PHB, but which are, mo...A wide variety of different types of microorganisms are known to produce intracellular energy and carbon storage products, which have been generally described as being poly (β-hydroxybutyrate), PHB, but which are, more often than not, copolymers containing different alkyl groups at the β-position. Hence, PHB belongs to the family ofpoly (β-hydroxyalkanoastes), PHA, all of which are usually formed as intracellular inclusions in bacteria under unbalanced growth conditions. Recently, it became of industrial interest to evaluate these PHA polyesters as natural biodegradable and biocompatible plastics for a wide range of possible applications, such as surgical sutures or packaging containers. For industrial applications, the controlled incorporation of repeating units with different chain lengths into a series of copolymers is desirable in order to produce polyesters with a range of material properties because physical and chemical characteristics depend strongly on the polymer composition. Such 'tailor-made' copolymers can be produced under controlled growth conditions in that, if a defined mixture of substrates for a certain type of microorganisms is supplied, a well defined and reproducible copolymer is formed.展开更多
Due to the poor solubility of aromatic polyesters in comm on orga nic solve nts,trifluoroacetic acid is usually used as a co-solve nt to increase their solubility for characterizations.However,only few studies have re...Due to the poor solubility of aromatic polyesters in comm on orga nic solve nts,trifluoroacetic acid is usually used as a co-solve nt to increase their solubility for characterizations.However,only few studies have reported the side reactions induced by it.We present here the application of in situ 1H-NMR techniques to explore its effect on the hydroxyl end-groups,which are usually used for the molecular weight determination of polyesters by end-group estimation method.Using bis(2-hydroxyethyl)terephthalate(BHET)as model compound,quantitative NMR results show the peak integration of hydroxyethyl end-groups decreased with time via a pseudo-first-order kinetics in d-trifluoroacetic acid/d-chloroform mixture solvent(1:10,V:V).This is due to the esterification of hydroxyethyl groups with trifluoroacetic acid,revealed by the H-^(13)C gradient-enhanced heteronuclear multiple bond correlation(gHMBC)spectrum.The mixtures of dimethyl terephthalate and BHET with different molar ratios were used to represent poly(ethylene terephthalate)(PET)with different degrees of polymerization,and the effect of trifluoroacetic acid on the estimation of hydroxyethyl groups and subsequent molecular weight determination of polyesters was studied.Our results show that if a relative error of 5%is allowed,the NMR measurements must be finished within 1.3 h of solution preparation at 25℃ in the mixture solve nt.The results were confirmed in PET sample,while in poly(ethyle ne adipate),the obtained esterifaction con stant is faster that those in aromatic system.The results can be applied to other polymer systems with alcohol functionalized groups,and used as a guideline for the characterization of polyesters and polyethers by end-group estimation method.展开更多
Six new thermally stable polyesters （4a-f） were synthesized through the solution polycondensation reaction of 2,5-pyridine dicarbonyldichloride （2） with six aromatic diols in N,N＇-dimethyl acetamide （DMAc） solu...Six new thermally stable polyesters （4a-f） were synthesized through the solution polycondensation reaction of 2,5-pyridine dicarbonyldichloride （2） with six aromatic diols in N,N＇-dimethyl acetamide （DMAc） solution and in the presence of pyridine as a base. The polycondensation reactions produce a series of new polyesters （4a-f） in high yields, and inherent viscosity between 0.30 and 0.55 dL/g. The resulting polyesters were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis （TGA and DTG）, solubility test, Fourier transform infrared （FT-IR） spectroscopy and gel permeation chromatography （GPC）. C 2009 Khalil Faghihi. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phas...A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phase transition behavior and crystallinity were characterized by IR,elemental analysis, TG-DTA, polarizing optical microscope (POM) equipped with a hot stage and X-ray diffraction techniques. The results demonstrate that all the synthesized polyesters exhibit nematic liquid crystalline phases and show relatively high glass transition temperatures and good thermal stability.展开更多
Aliphatic polyesters were synthesized via the ring opening polymerization of the corresponding lactones initiated with dibutylmagnesium both in bulk and in solution. The resulting polymers were characterized by 1H, 13...Aliphatic polyesters were synthesized via the ring opening polymerization of the corresponding lactones initiated with dibutylmagnesium both in bulk and in solution. The resulting polymers were characterized by 1H, 13C NMR, GPC and XRD. The results indicated that dibutylmagnesium is an effective initiator for the ring opening polymerization of lactones.展开更多
A new class of unsaturated polyesters based on diethylketone have been prepared by interfacial polymerization of 2,4-bis（4-hydroxybenzylidene）-3-pentanone（I） and 2,4-bis（4-hydroxy-3-methoxybenzylidene）-3-pentan...A new class of unsaturated polyesters based on diethylketone have been prepared by interfacial polymerization of 2,4-bis（4-hydroxybenzylidene）-3-pentanone（I） and 2,4-bis（4-hydroxy-3-methoxybenzylidene）-3-pentanone（II） with 4,4’-azodibenzoyl chloride and 3,3’-azodibenzoyl chloride at ambient temperature. The model compounds were synthesized by reaction of（I） and（II） with benzoyl chloride. The new monomers, model compounds and polyesters have been characterized by different spectral analyses. The polyesters have inherent viscosity of 0.55-0.80 d L/g and moderate number average molecular weight（Mn） in the range of 6150-7400 g/mol. Most of the compounds exhibited their solubility in aprotic solvents while partial solubility in various halogenated organic solvents was observed. The temperatures of 10% weight loss were high（225-330 °C） in nitrogen, indicating that these polyesters have excellent thermal stability. Doping with iodine dramatically raised the conductivity and produced brown colored semiconductive polymers with a maximum conductivity of 2.7 × 10-6 --1cm-1. Moreover, the morphological properties of selected example of polyesters were detected by SEM.展开更多
Six new polyesters 7a-f were synthesized through the solution polycondensation reaction of diacid chloride 5 with six aromatic diols 6a-f in N,N-dimethyl acetamide(DMAc) as solvent in the presence of pyridine as base....Six new polyesters 7a-f were synthesized through the solution polycondensation reaction of diacid chloride 5 with six aromatic diols 6a-f in N,N-dimethyl acetamide(DMAc) as solvent in the presence of pyridine as base.The polycondensation reaction produced a series of novel polyester containing pyridyl moiety in the main chain in high yields with inherent viscosities between 0.35 and 0.54 dL/g.The resulted polymers were fully characterized by means of FT-IR spectroscopy,elemental analyses,inherent viscosity ...展开更多
Polyesters consisting of substituted aromatic type Schiff base mesogenic unit andpolymethylene spacers were synthesized and their thermal transitions and liquid crystallineproperties were studied. The liquid crystalli...Polyesters consisting of substituted aromatic type Schiff base mesogenic unit andpolymethylene spacers were synthesized and their thermal transitions and liquid crystallineproperties were studied. The liquid crystalline behaviour has been characterized by differentialscanning calorimetry (DSC) and optical polarizing microscopy. Structural broadening bysubstitution of methoxy group in 2, 2' positions of the mesogenic core produce polymers withlower transition temperatures. Polymers synthesized from ortho and meta substituted phenylenediamine did not form a liquid crystal phase.展开更多
A series of degradable polyesters was synthesized via melt polymerization of 3,6-dioxaoctane-1,8-dioic acid and five different diols,catalyzed by antimony trioxide(Sb_(2)O_(3)).The polymers were characterized by FT-IR...A series of degradable polyesters was synthesized via melt polymerization of 3,6-dioxaoctane-1,8-dioic acid and five different diols,catalyzed by antimony trioxide(Sb_(2)O_(3)).The polymers were characterized by FT-IR and ^(1)H NMR spectroscopy,gel permeation chromatography(GPC)and differential scanning calorimetry(DSC)analysis.The polydispersity index(PDI=M_(w)/M_(n))of the polyesters ranged from 1.55 to 1.99,the weight-average molecular weight(M_(w))from 1.8×10^(4) to 3.2×10^(4) Da,the melting point from 63 to 123℃,and the highest decomposition temperature observed was 363℃.The influence of the structure of the polymer chain on hydrolytic degradability was investigated with tests performed at three different values of pH.The findings obtained provide useful insight for the molecular design and the synthesis of degradable polyesters.展开更多
A new type of liquid crystalline polyesters with resorcin as one part of the mesogenic unitconnected together by polymethylene, or phenylene group, and lateral groups consisting of arigid azobenzene as another part of...A new type of liquid crystalline polyesters with resorcin as one part of the mesogenic unitconnected together by polymethylene, or phenylene group, and lateral groups consisting of arigid azobenzene as another part of the mesogenic unit were synthesized by interfacialpolymerization of diacyl chlorides in 1, 2-dichloroethane and 2, 4-dihydroxy-4'-nitroazobenzen inaqueous alkaline solution. The polyester structures were confirmed by proton NMR and IRspectra. Their phase transition behavior and texture were studied by polarizing microscopy andDSC.展开更多
The photopolymerization of two kinds of prepolyesters containing conjugated diacetylene (PDA-6 and PDA-12) was investigated using DSC. By measuring the endothermic enthalpy of the prepolymers after different UV-irradi...The photopolymerization of two kinds of prepolyesters containing conjugated diacetylene (PDA-6 and PDA-12) was investigated using DSC. By measuring the endothermic enthalpy of the prepolymers after different UV-irradiation times, the polymerizations were found to follow the first-order rate law which agreed with the results of other investigators using a different method. The endothermic enthalpy measurements of PDA-6 and PDA-12 before UV-irradiation precluded the possibility that the decrease of endothermic enthalpy was caused by thermal polymerization.展开更多
A series of novel mesogenic polyesters with 2-dichloromethylhydroquinone moieties were synthesized by polycondensation of the novel diacyl chloride monomer 2-dichloromethyl-1,4-bis (4'-chloroformylbenzoyl) oxybenz...A series of novel mesogenic polyesters with 2-dichloromethylhydroquinone moieties were synthesized by polycondensation of the novel diacyl chloride monomer 2-dichloromethyl-1,4-bis (4'-chloroformylbenzoyl) oxybenzene (I) with alpha, omega-polymethylenediols including ethylene glycol, 1,4-butanediol, 1,6-hexanediol and 1,10-decanediol. The diacyl chloride monomer was synthesized by simultaneous transformations of both the carboxy and formaldehyde groups of 2-formyl-1,4-bis (4'-carboxybenzoyl) oxybenzene into acyl chloride and dichloromethyl groups respectively. The syntheses of the monomer (I) and the polymers were reported.展开更多
In order to explore new substitutes for 2,5 furandicarboxylic acid(FDCA)or poly(ethylene 2,5 furandicarboxylate)(PEF)and try to develop more ideal bio based polyesters,several thiophene aromatic polyesters(PETH,PPTH,P...In order to explore new substitutes for 2,5 furandicarboxylic acid(FDCA)or poly(ethylene 2,5 furandicarboxylate)(PEF)and try to develop more ideal bio based polyesters,several thiophene aromatic polyesters(PETH,PPTH,PBTH,and PHTH)were synthesized from dimethyl thiophene 2,5-dicarboxylate(DMTD)and different diols,including ethylene glycol,1,3-propanediol,1,4-butanediol,and 1,6-hexanediol.The chemical structures of obtained polyesters were confirmed by nuclear magnetic resonance spectroscopy(H-NMR and 1'C-NMR).Determined by GPC measurement,their average molecular weight(M.)varied from 5.22 x 10*g/mol to 7.94 x 10*g/mol with the molar-mass dispersity of 1.50-2.00.Based on the DSC and TGA results,the synthesized polyesters PETH,PPTH,and PBTH displayed comparable or even better thermal properties when compared with their FDCA-based analogues.From PETH to PHTH,their Tg varied from 64.6°Cto-1°C while Tsm ranged from 409 C to 380°C in nitrogen atmosphere,PETH showed elongation at break as high as 378%,tensile strength of 67 MPa,and tensile modulus of 1800 MPa.Meanwhile,the CO2 and O2 barrier of PETH was 12.0 and 6.6 folds higher than those of PET,respectively,and similar to those of PEF.Considering the overall properties,the synthesized thiophene aromatic polyesters,especially PETH,showed great potential to be used as an excellent bio based packaging material in the future.展开更多
<span style="font-family:Verdana;">The technological properties of the curing conditions for unsaturated polyesters synthesized on the basis of the alcoholysis products of secondary polyethylene tereph...<span style="font-family:Verdana;">The technological properties of the curing conditions for unsaturated polyesters synthesized on the basis of the alcoholysis products of secondary polyethylene terephthalate and unsaturated polyesters used in the production of fiberglass pipes were studied. It is shown that unsaturated polyesters synthesized on the basis of alcoholysis products can completely replace imported resins of grades 196 and 196A in the production of fiberglass pipes.展开更多
Amphiphilic hydroxyl functioned polyester（HFP） can be used as compatibilizers for blends of starch and resins.We developed a synthetic method for effective preparation of HFPs.Water was removed by high flow rate N_2...Amphiphilic hydroxyl functioned polyester（HFP） can be used as compatibilizers for blends of starch and resins.We developed a synthetic method for effective preparation of HFPs.Water was removed by high flow rate N_2 rather than high vacuum during polycondensation of sebacic acid with xylitol,sorbitol,or mannitol in the presence of dehydrative condensation catalyst and the product is with[η]of 27.2 mL/g,M_n of 1903,M_w of 167,693,T_g of -30.5℃,T_m of 44.0℃.Weight loss is 1.73%under 200℃. The integral distributions of molecular weight are 43.6 wt%and 63.8 wt%over 10,000 and 3000,respectively.The results indicated that higher molecular weight HFP was economically synthesized.展开更多
Polyesters with cyclic structures in the main chain typically possess superior mechanical and thermal properties together with chemical recyclability.Ring-opening polymerization(ROP)of bridged or fused bicyclic lacton...Polyesters with cyclic structures in the main chain typically possess superior mechanical and thermal properties together with chemical recyclability.Ring-opening polymerization(ROP)of bridged or fused bicyclic lactones is a simple,and in most cases controlled method to synthesize polyesters with alicyclic moieties in the polymer backbone.The stereochemistry of the alicyclic structures has a great effect on the polymer properties,which can be regulated by varying the polymerization conditions.Here,we report a systematic investigation on the ROP of 2-oxabicyclo[2.2.2]octan-3-one([2.2.2]VL)under different conditions.When initiated byn-butyl lithium(n-BuLi)or catalyzed by trifluoromethanesulfonic acid(TfOH)in the presence of benzyl alcohol,P[2.2.2]VLs containing all cis^(-1),4 disubstituted cyclohexane ring were obtained.However,P[2.2.2]VLs initiated by sodium methoxide(MeONa)or catalyzed by organic superbase contained both cis and trans isomeric structural units.The cis to trans transformation mechanism under these conditions was manifested,and the effect of stereochemical variations on the properties ofP[2.2.2]VLwas revealed.The stereoregularP[2.2.2]VLs,bothcisandtrans,exhibited higher crystallinity and melting temperatures(Tm)than those of the stereoirregular isomers.Finally,the degradation of P[2.2.2]VL with acid at high temperature could recover 3-cyclohexenecarboxylic acid.展开更多
基金financially supported by the National Key R&D Program of China(No.2021YFA1501700)the Science and Technology Development Plan of Jilin Province(Nos.20230101042JC and 20210201059GX)+1 种基金the National Natural Science Foundation of China,Basic Science Center Program(No.51988102)the National Natural Science Foundation of China(Nos.52203017 and 52073272)。
文摘Chemical modification of polymers represents a pivotal method for achieving functionalized polymer materials.However,due to the lack of post-functional handle,the chemical modification of polyester materials remains a significant challenge.Ring-opening copolymerization of cyclic anhydride and epoxides is a powerful approach to synthesize polyesters.In this work,we for the first time demonstrate the functionalizability of polyesters synthesized with brominated anhydride monomers.The post-functionalization is amenable to a wide variety of reactive groups and reactions with high yields.With multiple well-established functionalization pathways of brominated polyester materials and optimized the conditions for the modification reactions,a series of functionalized polyester materials can be obtained with high yields,providing new insights for the research about functionalization of polymers.
基金financially supported by State Administration of Foreign Experts Affairs(SAFEA)through the High-End Foreign Expert Program(No.BG2021227001)postdoctoral funding from Wuhan University of Science and Technology(No.105008701)。
文摘To enhance the properties of bio-based polyesters,enabling them to more closely mimic the characteristics of terephthalate-based materials,a series of aliphatic-aromatic copolyesters(P_(1)–P_(4))were synthesized via melt polycondensation.Diester monomers M and N were synthesized via the Williamson reaction,using lignin-derived 2-methoxyhydroquinone,methyl 4-chloromethylbenzoate,and methyl chloroacetate as starting materials.Hydroquinone bis(2-hydroxyethyl)ether(HQEE)and 1,4-cyclohexanedimethanol(CHDM)were employed as cyclic segments,while 1,4-butanediol(BDO)and 1,6-hexanediol(HDO)served as alkyl segments within the copolymer structures.The novel copolyesters exhibited molecular weights(Mw)in the range of 5.25×10^(4)–5.87×10^(4) g/mol,with polydispersity indices spanning from 2.50–2.66.Evaluation of the structural and thermomechanical properties indicated that the inclusion of alkyl segments induced a reduction in both crystallinity and molecular weight,while significantly improving the flexibility,whereas cyclic segments enhanced the processability of the copolyesters.Copolyesters P_(1) and P_(2),due to the presence of rigid segments(HQEE and CHDM),displayed relatively high glass transition temperatures(Tg>80℃)and melting temperatures(Tm>170℃).Notably,P_(2),incorporating CHDM,exhibited superior elongation properties(272%),attributed to the enhanced chain mobility resulting from its trans-conformation,while P_(1) was found to be likely brittle owing to excessive chain stiffness.Biodegradability assessment using earthworms as bioindicators revealed that the copolyesters demonstrated moderate degradation profiles,with P_(2) exhibiting a degradation rate of 4.82%,followed by P_(4) at 4.07%,P_(3) at 3.65%,and P_(1) at 3.17%.The higher degradation rate of P_(2) was attributed to its relatively larger d-spacing and lower toxicity,which facilitated enzymatic hydrolytic attack by microorganisms.These findings highlight the significance of optimizing the structural chain segments within aliphatic-aromatic copolyesters.By doing so,it is possible to significantly enhance their properties and performance,offering viable bio-based alternatives to petroleum-based polyesters such as polyethylene terephthalate(PET).
基金financially supported by the National Natural Science Foundation of China(Nos.22071016 and 21920102006)。
文摘The asymmetric alternating copolymerization of meso-epoxide and cyclic anhydrides provides an efficient access to enantiopure polyesters.Contrary to the extensive investigation of the stereochemistry resulting from epoxide building block,the chirality from anhydride and the configurational match with epoxide remain elusive.Herein,we discover that the bimetallic chromium catalysts have led to an obvious enhancement in terms of reactivity and enantioselectivity for the asymmetric copolymerization of meso-epoxide with various non-symmetric chiral anhydrides.Up to 97%ee was obtained during the asymmetric copolymerization of cyclohexene oxide(CHO)with(R)-methylsuccinic anhydride(R-MSA),and three-or four-carbon chiral centers were simultaneously installed in the aliphatic polyester backbone.In particular,the different combinations of stereochemistry in epoxide and anhydride building blocks considerably affect the thermal properties and crystalline behaviors of the resulting polyesters.This study uncovers an interesting method for regulating polymer crystallinity via matching the chirality of different monomers.
基金National Key Research and Development Program of China (No.2021YFB3700105)。
文摘The thermotropic liquid crystal polyester(TLCP)fiber is an increasingly important strategic high-performance fiber.In this paper,the TLCP was prepared by two-step melt polymerization using 4-hydroxybenzoic acid(HBA)and 6-hydroxy-2-naphthoic acid(HNA)as comonomers at a molar ratio of 7∶3.The structure of TLCP was confirmed by the Fourier transform infrared(FTIR)spectrometer and nuclear magnetic resonance(NMR)spectrometer.The thermal and rheological properties of TLCP before and after heat treatment were analyzed systematically by the differential scanning calorimeter(DSC),dynamic mechanical analyzer(DMA)and high-temperature rotational rheometer.The results revealed that the melting temperature,glass transition temperature and melt viscosity of the TLCP increased significantly after heat treatment.It indicates that the crystallization of the TLCP is perfect,and solid-phase condensation occurs during heat treatment,which increases its molecular mass.In conclusion,heat treatment at a temperature below but close to the melting temperature can effectively regulate the structure and properties of the TLCP,and the results of this study can provide a reference for the high strengthening of TLCP fibers.
文摘A wide variety of different types of microorganisms are known to produce intracellular energy and carbon storage products, which have been generally described as being poly (β-hydroxybutyrate), PHB, but which are, more often than not, copolymers containing different alkyl groups at the β-position. Hence, PHB belongs to the family ofpoly (β-hydroxyalkanoastes), PHA, all of which are usually formed as intracellular inclusions in bacteria under unbalanced growth conditions. Recently, it became of industrial interest to evaluate these PHA polyesters as natural biodegradable and biocompatible plastics for a wide range of possible applications, such as surgical sutures or packaging containers. For industrial applications, the controlled incorporation of repeating units with different chain lengths into a series of copolymers is desirable in order to produce polyesters with a range of material properties because physical and chemical characteristics depend strongly on the polymer composition. Such 'tailor-made' copolymers can be produced under controlled growth conditions in that, if a defined mixture of substrates for a certain type of microorganisms is supplied, a well defined and reproducible copolymer is formed.
基金by the National Natural Science Foundation of China(No.21774090)National Key R&D Program of China(No.2018YFB1105700)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Due to the poor solubility of aromatic polyesters in comm on orga nic solve nts,trifluoroacetic acid is usually used as a co-solve nt to increase their solubility for characterizations.However,only few studies have reported the side reactions induced by it.We present here the application of in situ 1H-NMR techniques to explore its effect on the hydroxyl end-groups,which are usually used for the molecular weight determination of polyesters by end-group estimation method.Using bis(2-hydroxyethyl)terephthalate(BHET)as model compound,quantitative NMR results show the peak integration of hydroxyethyl end-groups decreased with time via a pseudo-first-order kinetics in d-trifluoroacetic acid/d-chloroform mixture solvent(1:10,V:V).This is due to the esterification of hydroxyethyl groups with trifluoroacetic acid,revealed by the H-^(13)C gradient-enhanced heteronuclear multiple bond correlation(gHMBC)spectrum.The mixtures of dimethyl terephthalate and BHET with different molar ratios were used to represent poly(ethylene terephthalate)(PET)with different degrees of polymerization,and the effect of trifluoroacetic acid on the estimation of hydroxyethyl groups and subsequent molecular weight determination of polyesters was studied.Our results show that if a relative error of 5%is allowed,the NMR measurements must be finished within 1.3 h of solution preparation at 25℃ in the mixture solve nt.The results were confirmed in PET sample,while in poly(ethyle ne adipate),the obtained esterifaction con stant is faster that those in aromatic system.The results can be applied to other polymer systems with alcohol functionalized groups,and used as a guideline for the characterization of polyesters and polyethers by end-group estimation method.
文摘Six new thermally stable polyesters （4a-f） were synthesized through the solution polycondensation reaction of 2,5-pyridine dicarbonyldichloride （2） with six aromatic diols in N,N＇-dimethyl acetamide （DMAc） solution and in the presence of pyridine as a base. The polycondensation reactions produce a series of new polyesters （4a-f） in high yields, and inherent viscosity between 0.30 and 0.55 dL/g. The resulting polyesters were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis （TGA and DTG）, solubility test, Fourier transform infrared （FT-IR） spectroscopy and gel permeation chromatography （GPC）. C 2009 Khalil Faghihi. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
文摘A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phase transition behavior and crystallinity were characterized by IR,elemental analysis, TG-DTA, polarizing optical microscope (POM) equipped with a hot stage and X-ray diffraction techniques. The results demonstrate that all the synthesized polyesters exhibit nematic liquid crystalline phases and show relatively high glass transition temperatures and good thermal stability.
文摘Aliphatic polyesters were synthesized via the ring opening polymerization of the corresponding lactones initiated with dibutylmagnesium both in bulk and in solution. The resulting polymers were characterized by 1H, 13C NMR, GPC and XRD. The results indicated that dibutylmagnesium is an effective initiator for the ring opening polymerization of lactones.
文摘A new class of unsaturated polyesters based on diethylketone have been prepared by interfacial polymerization of 2,4-bis（4-hydroxybenzylidene）-3-pentanone（I） and 2,4-bis（4-hydroxy-3-methoxybenzylidene）-3-pentanone（II） with 4,4’-azodibenzoyl chloride and 3,3’-azodibenzoyl chloride at ambient temperature. The model compounds were synthesized by reaction of（I） and（II） with benzoyl chloride. The new monomers, model compounds and polyesters have been characterized by different spectral analyses. The polyesters have inherent viscosity of 0.55-0.80 d L/g and moderate number average molecular weight（Mn） in the range of 6150-7400 g/mol. Most of the compounds exhibited their solubility in aprotic solvents while partial solubility in various halogenated organic solvents was observed. The temperatures of 10% weight loss were high（225-330 °C） in nitrogen, indicating that these polyesters have excellent thermal stability. Doping with iodine dramatically raised the conductivity and produced brown colored semiconductive polymers with a maximum conductivity of 2.7 × 10-6 --1cm-1. Moreover, the morphological properties of selected example of polyesters were detected by SEM.
文摘Six new polyesters 7a-f were synthesized through the solution polycondensation reaction of diacid chloride 5 with six aromatic diols 6a-f in N,N-dimethyl acetamide(DMAc) as solvent in the presence of pyridine as base.The polycondensation reaction produced a series of novel polyester containing pyridyl moiety in the main chain in high yields with inherent viscosities between 0.35 and 0.54 dL/g.The resulted polymers were fully characterized by means of FT-IR spectroscopy,elemental analyses,inherent viscosity ...
文摘Polyesters consisting of substituted aromatic type Schiff base mesogenic unit andpolymethylene spacers were synthesized and their thermal transitions and liquid crystallineproperties were studied. The liquid crystalline behaviour has been characterized by differentialscanning calorimetry (DSC) and optical polarizing microscopy. Structural broadening bysubstitution of methoxy group in 2, 2' positions of the mesogenic core produce polymers withlower transition temperatures. Polymers synthesized from ortho and meta substituted phenylenediamine did not form a liquid crystal phase.
基金Funded by the Program(BG20190227001)of High-end Foreign Experts of the State Administration of Foreign Experts Affairs(SAFEA)the Coal Conversion and New Carbon Materials Hubei Key Laboratory in Wuhan University of Science and Technology(WKDM201909)。
文摘A series of degradable polyesters was synthesized via melt polymerization of 3,6-dioxaoctane-1,8-dioic acid and five different diols,catalyzed by antimony trioxide(Sb_(2)O_(3)).The polymers were characterized by FT-IR and ^(1)H NMR spectroscopy,gel permeation chromatography(GPC)and differential scanning calorimetry(DSC)analysis.The polydispersity index(PDI=M_(w)/M_(n))of the polyesters ranged from 1.55 to 1.99,the weight-average molecular weight(M_(w))from 1.8×10^(4) to 3.2×10^(4) Da,the melting point from 63 to 123℃,and the highest decomposition temperature observed was 363℃.The influence of the structure of the polymer chain on hydrolytic degradability was investigated with tests performed at three different values of pH.The findings obtained provide useful insight for the molecular design and the synthesis of degradable polyesters.
基金This work is supported by the Structure Research Laboratory,University of Science and Technology of China
文摘A new type of liquid crystalline polyesters with resorcin as one part of the mesogenic unitconnected together by polymethylene, or phenylene group, and lateral groups consisting of arigid azobenzene as another part of the mesogenic unit were synthesized by interfacialpolymerization of diacyl chlorides in 1, 2-dichloroethane and 2, 4-dihydroxy-4'-nitroazobenzen inaqueous alkaline solution. The polyester structures were confirmed by proton NMR and IRspectra. Their phase transition behavior and texture were studied by polarizing microscopy andDSC.
文摘The photopolymerization of two kinds of prepolyesters containing conjugated diacetylene (PDA-6 and PDA-12) was investigated using DSC. By measuring the endothermic enthalpy of the prepolymers after different UV-irradiation times, the polymerizations were found to follow the first-order rate law which agreed with the results of other investigators using a different method. The endothermic enthalpy measurements of PDA-6 and PDA-12 before UV-irradiation precluded the possibility that the decrease of endothermic enthalpy was caused by thermal polymerization.
基金This work was supported by the National Natural Science Foundation of China
文摘A series of novel mesogenic polyesters with 2-dichloromethylhydroquinone moieties were synthesized by polycondensation of the novel diacyl chloride monomer 2-dichloromethyl-1,4-bis (4'-chloroformylbenzoyl) oxybenzene (I) with alpha, omega-polymethylenediols including ethylene glycol, 1,4-butanediol, 1,6-hexanediol and 1,10-decanediol. The diacyl chloride monomer was synthesized by simultaneous transformations of both the carboxy and formaldehyde groups of 2-formyl-1,4-bis (4'-carboxybenzoyl) oxybenzene into acyl chloride and dichloromethyl groups respectively. The syntheses of the monomer (I) and the polymers were reported.
基金This work was finanially supported by the National Natural Science Foundation of China(No.21975270)Zhejiang Provincial Natural Science Foundation of China(No.LR20E030001)+2 种基金Ningbo 2025 Key Scientific Research Programs(No.2018810015)National Key Research and Development Program of China(No.2018YFD0400700)Research Project of Ningbo Natural Science Foundation(No.2019A610141).
文摘In order to explore new substitutes for 2,5 furandicarboxylic acid(FDCA)or poly(ethylene 2,5 furandicarboxylate)(PEF)and try to develop more ideal bio based polyesters,several thiophene aromatic polyesters(PETH,PPTH,PBTH,and PHTH)were synthesized from dimethyl thiophene 2,5-dicarboxylate(DMTD)and different diols,including ethylene glycol,1,3-propanediol,1,4-butanediol,and 1,6-hexanediol.The chemical structures of obtained polyesters were confirmed by nuclear magnetic resonance spectroscopy(H-NMR and 1'C-NMR).Determined by GPC measurement,their average molecular weight(M.)varied from 5.22 x 10*g/mol to 7.94 x 10*g/mol with the molar-mass dispersity of 1.50-2.00.Based on the DSC and TGA results,the synthesized polyesters PETH,PPTH,and PBTH displayed comparable or even better thermal properties when compared with their FDCA-based analogues.From PETH to PHTH,their Tg varied from 64.6°Cto-1°C while Tsm ranged from 409 C to 380°C in nitrogen atmosphere,PETH showed elongation at break as high as 378%,tensile strength of 67 MPa,and tensile modulus of 1800 MPa.Meanwhile,the CO2 and O2 barrier of PETH was 12.0 and 6.6 folds higher than those of PET,respectively,and similar to those of PEF.Considering the overall properties,the synthesized thiophene aromatic polyesters,especially PETH,showed great potential to be used as an excellent bio based packaging material in the future.
文摘<span style="font-family:Verdana;">The technological properties of the curing conditions for unsaturated polyesters synthesized on the basis of the alcoholysis products of secondary polyethylene terephthalate and unsaturated polyesters used in the production of fiberglass pipes were studied. It is shown that unsaturated polyesters synthesized on the basis of alcoholysis products can completely replace imported resins of grades 196 and 196A in the production of fiberglass pipes.
基金the financial support of National Key Technology R&D Program(No.2006BAD07A06)National"863"Program Project of China(No.2006AA100216)
文摘Amphiphilic hydroxyl functioned polyester（HFP） can be used as compatibilizers for blends of starch and resins.We developed a synthetic method for effective preparation of HFPs.Water was removed by high flow rate N_2 rather than high vacuum during polycondensation of sebacic acid with xylitol,sorbitol,or mannitol in the presence of dehydrative condensation catalyst and the product is with[η]of 27.2 mL/g,M_n of 1903,M_w of 167,693,T_g of -30.5℃,T_m of 44.0℃.Weight loss is 1.73%under 200℃. The integral distributions of molecular weight are 43.6 wt%and 63.8 wt%over 10,000 and 3000,respectively.The results indicated that higher molecular weight HFP was economically synthesized.
基金financially supported by the National Natural Science Foundation of China(Nos.21871014 and 21971005)。
文摘Polyesters with cyclic structures in the main chain typically possess superior mechanical and thermal properties together with chemical recyclability.Ring-opening polymerization(ROP)of bridged or fused bicyclic lactones is a simple,and in most cases controlled method to synthesize polyesters with alicyclic moieties in the polymer backbone.The stereochemistry of the alicyclic structures has a great effect on the polymer properties,which can be regulated by varying the polymerization conditions.Here,we report a systematic investigation on the ROP of 2-oxabicyclo[2.2.2]octan-3-one([2.2.2]VL)under different conditions.When initiated byn-butyl lithium(n-BuLi)or catalyzed by trifluoromethanesulfonic acid(TfOH)in the presence of benzyl alcohol,P[2.2.2]VLs containing all cis^(-1),4 disubstituted cyclohexane ring were obtained.However,P[2.2.2]VLs initiated by sodium methoxide(MeONa)or catalyzed by organic superbase contained both cis and trans isomeric structural units.The cis to trans transformation mechanism under these conditions was manifested,and the effect of stereochemical variations on the properties ofP[2.2.2]VLwas revealed.The stereoregularP[2.2.2]VLs,bothcisandtrans,exhibited higher crystallinity and melting temperatures(Tm)than those of the stereoirregular isomers.Finally,the degradation of P[2.2.2]VL with acid at high temperature could recover 3-cyclohexenecarboxylic acid.
