In recent years,there has been an increasing need for climate information across diverse sectors of society.This demand has arisen from the necessity to adapt to and mitigate the impacts of climate variability and cha...In recent years,there has been an increasing need for climate information across diverse sectors of society.This demand has arisen from the necessity to adapt to and mitigate the impacts of climate variability and change.Likewise,this period has seen a significant increase in our understanding of the physical processes and mechanisms that drive precipitation and its variability across different regions of Africa.By leveraging a large volume of climate model outputs,numerous studies have investigated the model representation of African precipitation as well as underlying physical processes.These studies have assessed whether the physical processes are well depicted and whether the models are fit for informing mitigation and adaptation strategies.This paper provides a review of the progress in precipitation simulation overAfrica in state-of-the-science climate models and discusses the major issues and challenges that remain.展开更多
(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbi...(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.展开更多
In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical propert...In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.展开更多
Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evo...Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.展开更多
Slopes are likely to fail in areas with frequent rainfall and earthquakes.The deformation characteristics of unsaturated slopes subjected to post-rainfall earthquakes are investigated using centrifuge model tests and ...Slopes are likely to fail in areas with frequent rainfall and earthquakes.The deformation characteristics of unsaturated slopes subjected to post-rainfall earthquakes are investigated using centrifuge model tests and finite element analyses.Three tests of the slope deformation under earthquake and post-rainfall earthquakes are first studied using image analysis techniques.Then,based on an elastoplastic constitutive model,numerical simulations are carried out using the finite element method and compared with the centrifuge test results.Finally,a parametric study is performed to clarify the effects of antecedent rainfall on earthquake-induced slope deformation.The results show that slope deformation caused by post-rainfall earthquakes differs from that caused by earthquakes without antecedent rainfall.The seepage flow and soil strength of the slope are affected by previous rainfall conditions,such as intensity and duration,which directly influence the slope deformation caused by the subsequent earthquake.Soil displacement and strain become greater and the slip surface is more noticeable during the post-rainfall earthquake of higher intensity.In addition,the time interval between the rainfall and the earthquake has a considerable impact on the detailed characteristics of the slope deformation,and the significant deformation occurs at the time of lowest soil strength when seepage flow reaches the lower part of the slope.Moreover,the repeated intermittent rainfall greatly affects the subsequent earthquake-induced slope deformation,the main characteristics of which are closely related to the changes in saturation and strength of the slope.However,with the prolonged time gap between each round of rainfall,the earthquake-induced slope deformation becomes insignificant.展开更多
Hepatitis B Virus(HBV)infection and heavy alcohol consumption are the two primary pathogenic causes of liver cirrhosis.In this paper,we proposed a deterministic mathematical model and a logistic equation to investigat...Hepatitis B Virus(HBV)infection and heavy alcohol consumption are the two primary pathogenic causes of liver cirrhosis.In this paper,we proposed a deterministic mathematical model and a logistic equation to investigate the dynamics of liver cirrhosis progression as well as to explain the implications of variations in alcohol consumption on chronic hepatitis B patients,respectively.The intricate interactions between liver cirrhosis,recovery,and treatment dynamics are captured by the model.This study aims to show that alcohol consumption by Hepatitis B-infected individuals accelerates liver cirrhosis progression while treatment of acutely infected individuals reduces it.We proved that a unique solution of the proposed model exists,which is positive and bounded.Using the next-generation matrix approach,two basic reproductive numbers R_(A_(0))and R_(A_(max))are calculated to identify future recurrence.The equilibrium points are calculated,and both equilibria are proved locally and globally asymptotically stable when R_(0)is below and above one,respectively.It is shown that bifurcation exists at R_(0)=1 and a detailed proof for forward bifurcation is given.Furthermore,we performed the sensitivity analysis of the model parameters on R_(0).For the confirmation of analytical work,we performed numerical simulations,and the results indicate that the treatment and the inhibitory effects reduce the risk of developing liver cirrhosis in individuals,while heavy alcohol consumption accelerates markedly the liver cirrhosis progression in patients with chronic hepatitis B.展开更多
Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical si...Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.展开更多
To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework ba...To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.展开更多
The intracontinental subduction of a>200-km-long section of the Tajik-Tarim lithosphere beneath the Pamir Mountains is proposed to explain nearly 30 km of shortening in the Tajik fold-thrust belt and the Pamir upli...The intracontinental subduction of a>200-km-long section of the Tajik-Tarim lithosphere beneath the Pamir Mountains is proposed to explain nearly 30 km of shortening in the Tajik fold-thrust belt and the Pamir uplift.Seismic imaging revealed that the upper slab was scraped and that the lower slab had subducted to a depth of>150 km.These features constitute the tectonic complexity of the Pamirs,as well as the thermal subduction mechanism involved,which remains poorly understood.Hence,in this study,high-resolution three-dimensional(3D)kinematic modeling is applied to investigate the thermal structure and geometry of the subducting slab beneath the Pamirs.The modeled slab configuration reveals distinct along-strike variations,with a steeply dipping slab beneath the southern Pamirs,a more gently inclined slab beneath the northern Pamirs,and apparent upper slab termination at shallow depths beneath the Pamirs.The thermal field reveals a cold slab core after delamination,with temperatures ranging from 400℃to 800℃,enveloped by a hotter mantle reaching~1400℃.The occurrence of intermediate-depth earthquakes aligns primarily with colder slab regions,particularly near the slab tear-off below the southwestern Pamirs,indicating a strong correlation between slab temperature and seismicity.In contrast,the northern Pamirs exhibit reduced seismicity at depth,which is likely associated with thermal weakening and delamination.The central Pamirs show a significant thermal anomaly caused by a concave slab,where the coldest crust does not descend deeply,further suggesting crustal detachment or mechanical failure.The lateral asymmetry in slab temperature possibly explains the mechanism of lateral tearing and differential slab-mantle coupling.展开更多
In this study,copper extraction from low-grade oxide-sulfide ores was investigated using a leaching method combined with response surface methodology(RSM)to optimize operational conditions and assess leaching kinetics...In this study,copper extraction from low-grade oxide-sulfide ores was investigated using a leaching method combined with response surface methodology(RSM)to optimize operational conditions and assess leaching kinetics.Given copper's extensive industrial applications,sustainable recovery from low-grade ores is critical.Five key parameters-acid concentration,leaching time,particle size,temperature,and solids percentage-were identified as major influences on copper recovery.The results revealed that leaching time and solids percentage,along with interactions between temperature-time and temperature-solids percentage,had the most significant effects.Optimal conditions for 80% copper recovery while minimizing iron recovery below 3% included an acid concentration of 1.21 mol L^(-1),a leaching time of 108 min,a particle size of 438μm,a temperature of 45℃,and a solids percentage of 18.2%.Leaching kinetics were analyzed using shrinking core models,with the Dickinson model best describing the process,showing an activation energy of 32.63 kJ mol^(-1),indicative of mixed diffusion and chemical reaction control.The final kinetic model effectively predicted the influence of key parameters.These findings highlight the importance of optimizing process variables and selecting suitable kinetic models to enhance extraction efficiency,reduce costs,and improve sustainability in copper recovery.展开更多
Background Multibreed genomic prediction(MBGP)is crucial for improving prediction accuracy for breeds with small populations,for which limited data are often available.Recent studies have demonstrated that partitionin...Background Multibreed genomic prediction(MBGP)is crucial for improving prediction accuracy for breeds with small populations,for which limited data are often available.Recent studies have demonstrated that partitioning the genome into nonoverlapping blocks to model heterogeneous genetic(co)variance in multitrait models can achieve higher joint prediction accuracy.However,the block partitioning method,a key factor influencing model performance,has not been extensively explored.Results We introduce mbBayesABLD,a novel Bayesian MBGP model that partitions each chromosome into nonoverlapping blocks on the basis of linkage disequilibrium(LD)patterns.In this model,marker effects within each block are assumed to follow normal distributions with block-specific parameters.We employ simulated data as well as empirical datasets from pigs and beans to assess genomic prediction accuracy across different models using cross-validation.The results demonstrate that mbBayesABLD significantly outperforms conventional MBGP models,such as GBLUP and BayesR.For the meat marbling score trait in pigs,compared with GBLUP,which does not account for heterogeneous genetic(co)variance,mbBayesABLD improves the prediction accuracy for the small-population breed Landrace by 15.6%.Furthermore,our findings indicate that a moderate level of similarity in LD patterns between breeds(with an average correlation of 0.6)is sufficient to improve the prediction accuracy of the target breed.Conclusions This study presents a novel LD block-based approach for multibreed genomic prediction.Our work provides a practical tool for livestock breeding programs and offers new insights into leveraging genetic diversity across breeds for improved genomic prediction.展开更多
Deep rock engineering is affected by coupled thermo-hydro-mechanical(THM)-dynamic fields,necessitating the elucidation of the dynamic mechanical behavior and failure mechanisms.This study utilized a Multi-field Couple...Deep rock engineering is affected by coupled thermo-hydro-mechanical(THM)-dynamic fields,necessitating the elucidation of the dynamic mechanical behavior and failure mechanisms.This study utilized a Multi-field Coupled Controlled Split Hopkinson Pressure Bar(MCC-SHPB)system to elucidate the cross-scale dynamic responses of rocks and the boundaries of failure modes under THM coupling.Impact tests were conducted on green sandstone under coupled conditions of temperature(25℃-80℃),confining pressure(0-15 MPa),and seepage water pressure(0-15 MPa).Scanning electron microscopy(SEM)microstructural characterization and COMSOL Multiphysics numerical simulations were conducted,and a dynamic constitutive theoretical framework and failure-prediction methodology were established.We investigated the impact toughness index(I_(t)),dynamic modulus(E_(d)),dynamic triaxial compressive strength(TCS_(d)),fragmentation degree(W),and failure modes of green sandstone under thermo-confining pressure-seepage-impact loading conditions.The key findings reveal that the(I_(t))reflects different energy regulation mechanisms across different confining pressure regimes.Thermal-microcrack interactions dominate at low pressure,and energy absorption prevails at high pressure.A triphasic dynamic modulus model captures stiffness evolution under energy-driven conditions,revealing cross-scale crack nucleation-propagation and fragment reorganization.The TCSd inflection point signifies energy dissipation shifts,causing nonlinear skeleton bearing-capacity degradation.A critical criterion based on the W was established to distinguish between the two failure modes and predict the unstable failure initiation.Numerical simulations were used to elucidate the effects of inertia-dominated crack propagation and stress wave interference,validating the critical criterion and the predictive accuracy of the theoretical model during cross-scale failure.This study provides a theoretical foundation for assessing the dynamic stability of rock masses subjected to multi-field coupling during deep resource exploitation.展开更多
We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers...We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers based on the Lambert W function:a voltage-driven V-Lambert solver for high-fidelity I–V computation and a resistance-driven R-Lambert solver designed for seamless integration in a closed-loop PV emulator.Unlike Taylor-linearized explicit models,our proposed formulation retains the exponential nonlinearity of the PV equations.It employs a numerically stable analytical evaluation that eliminates the need for lookup tables and root-finding,all while maintaining limited computational costs and a small memory footprint.The R-Lambert model is integrated into a buck-converter emulator equipped with a discrete PI regulator,which generates current references directly from sensed operating points,thus supporting hardware-constrained implementation.Comprehensive numerical experiments conducted on six commercial modules from various technologies(mono,poly,and multicrystalline)demonstrate significant accuracy improvements under the IEC EN 50530 near-MPP criterion:the V-Lambert solver reduces the±10%Vmpp band error by up to 61 times compared to an explicit-model baseline.Dynamic simulations under varying irradiance,temperature,and load conditions achieve millisecond-scale settling with accurate trajectory tracking.Additionally,processor-in-the-loop experimental validation on an embedded microcontroller supports the simulation results.By unifying exact analytical modeling with embedded realization,this work advances computer modeling for PV emulation,MPPT benchmarking,and controller verification in integrated renewable energy systems.展开更多
In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis...In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis nonlinear characteristics of piezo-positioning actuator.The static nonlinear part and dynamic linear part of the Hammerstein model are represented by models obtained through the Prandtl-Ishlinskii(PI)model and Hankel matrix system identification method,respectively.This model demonstrates good generalization capability for typical input frequencies below 200 Hz.A sliding mode inverse compensation tracking control strategy based on P-I inverse model and integral augmentation is proposed.Experimental results show that compared with PID inverse compensation control and sliding mode control without inverse compensation,the sliding mode inverse compensation control has a more ideal step response and no overshoot,moreover,the settling time is only 6.2 ms.In the frequency domain,the system closed-loop tracking bandwidth reaches 119.9 Hz,and the disturbance rejection bandwidth reaches 86.2 Hz.The proposed control strategy can effectively compensate the hysteresis nonlinearity,and improve the tracking accuracy and antidisturbance capability of piezo-positioning system.展开更多
As a key node of modern transportation network,the informationization management of road tunnels is crucial to ensure the operation safety and traffic efficiency.However,the existing tunnel vehicle modeling methods ge...As a key node of modern transportation network,the informationization management of road tunnels is crucial to ensure the operation safety and traffic efficiency.However,the existing tunnel vehicle modeling methods generally have problems such as insufficient 3D scene description capability and low dynamic update efficiency,which are difficult to meet the demand of real-time accurate management.For this reason,this paper proposes a vehicle twin modeling method for road tunnels.This approach starts from the actual management needs,and supports multi-level dynamic modeling from vehicle type,size to color by constructing a vehicle model library that can be flexibly invoked;at the same time,semantic constraint rules with geometric layout,behavioral attributes,and spatial relationships are designed to ensure that the virtual model matches with the real model with a high degree of similarity;ultimately,the prototype system is constructed and the case region is selected for the case study,and the dynamic vehicle status in the tunnel is realized by integrating real-time monitoring data with semantic constraints for precise virtual-real mapping.Finally,the prototype system is constructed and case experiments are conducted in selected case areas,which are combined with real-time monitoring data to realize dynamic updating and three-dimensional visualization of vehicle states in tunnels.The experiments show that the proposed method can run smoothly with an average rendering efficiency of 17.70 ms while guaranteeing the modeling accuracy(composite similarity of 0.867),which significantly improves the real-time and intuitive tunnel management.The research results provide reliable technical support for intelligent operation and emergency response of road tunnels,and offer new ideas for digital twin modeling of complex scenes.展开更多
With the development of smart cities and smart technologies,parks,as functional units of the city,are facing smart transformation.The development of smart parks can help address challenges of technology integration wi...With the development of smart cities and smart technologies,parks,as functional units of the city,are facing smart transformation.The development of smart parks can help address challenges of technology integration within urban spaces and serve as testbeds for exploring smart city planning and governance models.Information models facilitate the effective integration of technology into space.Building Information Modeling(BIM)and City Information Modeling(CIM)have been widely used in urban construction.However,the existing information models have limitations in the application of the park,so it is necessary to develop an information model suitable for the park.This paper first traces the evolution of park smart transformation,reviews the global landscape of smart park development,and identifies key trends and persistent challenges.Addressing the particularities of parks,the concept of Park Information Modeling(PIM)is proposed.PIM leverages smart technologies such as artificial intelligence,digital twins,and collaborative sensing to help form a‘space-technology-system’smart structure,enabling systematic management of diverse park spaces,addressing the deficiency in park-level information models,and aiming to achieve scale articulation between BIM and CIM.Finally,through a detailed top-level design application case study of the Nanjing Smart Education Park in China,this paper illustrates the translation process of the PIM concept into practice,showcasing its potential to provide smart management tools for park managers and enhance services for park stakeholders,although further empirical validation is required.展开更多
Architecture framework has become an effective method recently to describe the system of systems(SoS)architecture,such as the United States(US)Department of Defense Architecture Framework Version 2.0(DoDAF2.0).As a vi...Architecture framework has become an effective method recently to describe the system of systems(SoS)architecture,such as the United States(US)Department of Defense Architecture Framework Version 2.0(DoDAF2.0).As a viewpoint in DoDAF2.0,the operational viewpoint(OV)describes operational activities,nodes,and resource flows.The OV models are important for SoS architecture development.However,as the SoS complexity increases,constructing OV models with traditional methods exposes shortcomings,such as inefficient data collection and low modeling standards.Therefore,we propose an intelligent modeling method for five OV models,including operational resource flow OV-2,organizational relationships OV-4,operational activity hierarchy OV-5a,operational activities model OV-5b,and operational activity sequences OV-6c.The main idea of the method is to extract OV architecture data from text and generate interoperable OV models.First,we construct the OV meta model based on the DoDAF2.0 meta model(DM2).Second,OV architecture named entities is recognized from text based on the bidirectional long short-term memory and conditional random field(BiLSTM-CRF)model.And OV architecture relationships are collected with relationship extraction rules.Finally,we define the generation rules for OV models and develop an OV modeling tool.We use unmanned surface vehicles(USV)swarm target defense SoS architecture as a case to verify the feasibility and effectiveness of the intelligent modeling method.展开更多
Using a dynamic laser monitoring technique,the solubility of 3-nitro-1,2,4-triazole-5-one(NTO)was investigated in two different binary systems,namely hydroxylamine nitrate(HAN)-water and boric acid(HB)-water ranging f...Using a dynamic laser monitoring technique,the solubility of 3-nitro-1,2,4-triazole-5-one(NTO)was investigated in two different binary systems,namely hydroxylamine nitrate(HAN)-water and boric acid(HB)-water ranging from 278.15 K to 318.15 K.The solubility in each system was found to be positively correlated with temperature.Furthermore,solubility data were analyzed using four equations:the modified Apelblat equation,Van’t Hoff equation,λh equation and CNIBS/R-K equations,and they provided satisfactory results for both two systems.The average root-mean-square deviation(105RMSD)values for these models were less than 13.93.Calculations utilizing the Van’t Hoff equation and Gibbs equations facilitated the derivation of apparent thermodynamic properties of NTO dissolution in the two systems,including values for Gibbs free energy,enthalpy and entropy.The%ζ_(H)is larger than%ζ_(TS),and all the%ζ_(H)data are≥58.63%,indicating that the enthalpy make a greater contribution than entropy to theΔG_(soln)^(Θ).展开更多
BACKGROUND Emerging evidence implicates Candida albicans(C.albicans)in human oncogenesis.Notably,studies have supported its involvement in regulating outcomes in colorectal cancer(CRC).This study investigated the para...BACKGROUND Emerging evidence implicates Candida albicans(C.albicans)in human oncogenesis.Notably,studies have supported its involvement in regulating outcomes in colorectal cancer(CRC).This study investigated the paradoxical role of C.albicans in CRC,aiming to determine whether it promotes or suppresses tumor development,with a focus on the mechanistic basis linked to its metabolic profile.AIM To investigate the dual role of C.albicans in the development and progression of CRC through metabolite profiling and to establish a prognostic model that integrates the microbial and metabolic interactions in CRC,providing insights into potential therapeutic strategies and clinical outcomes.METHODSA prognostic model integrating C. albicans with CRC was developed, incorporating enrichment analysis, immuneinfiltration profiling, survival analysis, Mendelian randomization, single-cell sequencing, and spatial transcriptomics.The effects of the C. albicans metabolite mixture on CRC cells were subsequently validated in vitro. Theprimary metabolite composition was characterized using liquid chromatography-mass spectrometry.RESULTSA prognostic model based on five specific mRNA markers, EHD4, LIME1, GADD45B, TIMP1, and FDFT1, wasestablished. The C. albicans metabolite mixture significantly reduced CRC cell viability. Post-treatment analysisrevealed a significant decrease in gene expression in HT29 cells, while the expression levels of TIMP1, EHD4, andGADD45B were significantly elevated in HCT116 cells. Conversely, LIME1 expression and that of other CRC celllines showed reductions. In normal colonic epithelial cells (NCM460), GADD45B, TIMP1, and FDFT1 expressionlevels were significantly increased, while LIME1 and EHD4 levels were markedly reduced. Following metabolitetreatment, the invasive and migratory capabilities of NCM460, HT29, and HCT116 cells were reduced. Quantitativeanalysis of extracellular ATP post-treatment showed a significant elevation (P < 0.01). The C. albicans metabolitemixture had no effect on reactive oxygen species accumulation in CRC cells but led to a reduction in mitochondrialmembrane potential, increased intracellular lipid peroxidation, and induced apoptosis. Metabolomic profilingrevealed significant alterations, with 516 metabolites upregulated and 531 downregulated.CONCLUSIONThis study introduced a novel prognostic model for CRC risk assessment. The findings suggested that the C.albicans metabolite mixture exerted an inhibitory effect on CRC initiation.展开更多
Earth’s internal core and crustal magnetic fields,as measured by geomagnetic satellites like MSS-1(Macao Science Satellite-1)and Swarm,are vital for understanding core dynamics and tectonic evolution.To model these i...Earth’s internal core and crustal magnetic fields,as measured by geomagnetic satellites like MSS-1(Macao Science Satellite-1)and Swarm,are vital for understanding core dynamics and tectonic evolution.To model these internal magnetic fields accurately,data selection based on specific criteria is often employed to minimize the influence of rapidly changing current systems in the ionosphere and magnetosphere.However,the quantitative impact of various data selection criteria on internal geomagnetic field modeling is not well understood.This study aims to address this issue and provide a reference for constructing and applying geomagnetic field models.First,we collect the latest MSS-1 and Swarm satellite magnetic data and summarize widely used data selection criteria in geomagnetic field modeling.Second,we briefly describe the method to co-estimate the core,crustal,and large-scale magnetospheric fields using satellite magnetic data.Finally,we conduct a series of field modeling experiments with different data selection criteria to quantitatively estimate their influence.Our numerical experiments confirm that without selecting data from dark regions and geomagnetically quiet times,the resulting internal field differences at the Earth’s surface can range from tens to hundreds of nanotesla(nT).Additionally,we find that the uncertainties introduced into field models by different data selection criteria are significantly larger than the measurement accuracy of modern geomagnetic satellites.These uncertainties should be considered when utilizing constructed magnetic field models for scientific research and applications.展开更多
基金the World Climate Research Programme(WCRP),Climate Variability and Predictability(CLIVAR),and Global Energy and Water Exchanges(GEWEX)for facilitating the coordination of African monsoon researchsupport from the Center for Earth System Modeling,Analysis,and Data at the Pennsylvania State Universitythe support of the Office of Science of the U.S.Department of Energy Biological and Environmental Research as part of the Regional&Global Model Analysis(RGMA)program area。
文摘In recent years,there has been an increasing need for climate information across diverse sectors of society.This demand has arisen from the necessity to adapt to and mitigate the impacts of climate variability and change.Likewise,this period has seen a significant increase in our understanding of the physical processes and mechanisms that drive precipitation and its variability across different regions of Africa.By leveraging a large volume of climate model outputs,numerous studies have investigated the model representation of African precipitation as well as underlying physical processes.These studies have assessed whether the physical processes are well depicted and whether the models are fit for informing mitigation and adaptation strategies.This paper provides a review of the progress in precipitation simulation overAfrica in state-of-the-science climate models and discusses the major issues and challenges that remain.
基金supported in part by the National Key Research and Development Program of China(2021YFB2900501)in part by the Shaanxi Science and Technology Innovation Team(2023-CX-TD-03)+3 种基金in part by the Science and Technology Program of Shaanxi Province(2021GXLH-Z-038)in part by the Natural Science Foundation of Hunan Province(2023JJ40607 and 2023JJ50045)in part by the Scientific Research Foundation of Hunan Provincial Education Department(23B0713 and 24B0603)in part by the National Natural Science Foundation of China(62401371,62101275,and 62372070).
文摘(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.
基金support from the National Natural Science Foundation of China(Grant Nos.42277161 and 42230709).
文摘In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.
基金supported by the National Natural Science Foundation of China(Grant No.12272018)the National Key Basic Research Project(2022JCJQZD20600).
文摘Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.
基金supported by the China Postdoctoral Science Foundation(CPSF)(Grant No.2024M762769)the Natural Science Basic Research Program of Shaanxi(Grant No.2024JC-YBQN-0333)the Postdoctoral Fellowship Program of CPSF(Grant No.GZC20232230).
文摘Slopes are likely to fail in areas with frequent rainfall and earthquakes.The deformation characteristics of unsaturated slopes subjected to post-rainfall earthquakes are investigated using centrifuge model tests and finite element analyses.Three tests of the slope deformation under earthquake and post-rainfall earthquakes are first studied using image analysis techniques.Then,based on an elastoplastic constitutive model,numerical simulations are carried out using the finite element method and compared with the centrifuge test results.Finally,a parametric study is performed to clarify the effects of antecedent rainfall on earthquake-induced slope deformation.The results show that slope deformation caused by post-rainfall earthquakes differs from that caused by earthquakes without antecedent rainfall.The seepage flow and soil strength of the slope are affected by previous rainfall conditions,such as intensity and duration,which directly influence the slope deformation caused by the subsequent earthquake.Soil displacement and strain become greater and the slip surface is more noticeable during the post-rainfall earthquake of higher intensity.In addition,the time interval between the rainfall and the earthquake has a considerable impact on the detailed characteristics of the slope deformation,and the significant deformation occurs at the time of lowest soil strength when seepage flow reaches the lower part of the slope.Moreover,the repeated intermittent rainfall greatly affects the subsequent earthquake-induced slope deformation,the main characteristics of which are closely related to the changes in saturation and strength of the slope.However,with the prolonged time gap between each round of rainfall,the earthquake-induced slope deformation becomes insignificant.
文摘Hepatitis B Virus(HBV)infection and heavy alcohol consumption are the two primary pathogenic causes of liver cirrhosis.In this paper,we proposed a deterministic mathematical model and a logistic equation to investigate the dynamics of liver cirrhosis progression as well as to explain the implications of variations in alcohol consumption on chronic hepatitis B patients,respectively.The intricate interactions between liver cirrhosis,recovery,and treatment dynamics are captured by the model.This study aims to show that alcohol consumption by Hepatitis B-infected individuals accelerates liver cirrhosis progression while treatment of acutely infected individuals reduces it.We proved that a unique solution of the proposed model exists,which is positive and bounded.Using the next-generation matrix approach,two basic reproductive numbers R_(A_(0))and R_(A_(max))are calculated to identify future recurrence.The equilibrium points are calculated,and both equilibria are proved locally and globally asymptotically stable when R_(0)is below and above one,respectively.It is shown that bifurcation exists at R_(0)=1 and a detailed proof for forward bifurcation is given.Furthermore,we performed the sensitivity analysis of the model parameters on R_(0).For the confirmation of analytical work,we performed numerical simulations,and the results indicate that the treatment and the inhibitory effects reduce the risk of developing liver cirrhosis in individuals,while heavy alcohol consumption accelerates markedly the liver cirrhosis progression in patients with chronic hepatitis B.
基金financially supported by the National Key Research and Development Program of China (2022YFB3706802)。
文摘Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.
基金supported by the confidential research grant No.a8317。
文摘To address the issues of frequent identity switches(IDs)and degraded identification accuracy in multi object tracking(MOT)under complex occlusion scenarios,this study proposes an occlusion-robust tracking framework based on face-pedestrian joint feature modeling.By constructing a joint tracking model centered on“intra-class independent tracking+cross-category dynamic binding”,designing a multi-modal matching metric with spatio-temporal and appearance constraints,and innovatively introducing a cross-category feature mutual verification mechanism and a dual matching strategy,this work effectively resolves performance degradation in traditional single-category tracking methods caused by short-term occlusion,cross-camera tracking,and crowded environments.Experiments on the Chokepoint_Face_Pedestrian_Track test set demonstrate that in complex scenes,the proposed method improves Face-Pedestrian Matching F1 area under the curve(F1 AUC)by approximately 4 to 43 percentage points compared to several traditional methods.The joint tracking model achieves overall performance metrics of IDF1:85.1825%and MOTA:86.5956%,representing improvements of 0.91 and 0.06 percentage points,respectively,over the baseline model.Ablation studies confirm the effectiveness of key modules such as the Intersection over Area(IoA)/Intersection over Union(IoU)joint metric and dynamic threshold adjustment,validating the significant role of the cross-category identity matching mechanism in enhancing tracking stability.Our_model shows a 16.7%frame per second(FPS)drop vs.fairness of detection and re-identification in multiple object tracking(FairMOT),with its cross-category binding module adding aboute 10%overhead,yet maintains near-real-time performance for essential face-pedestrian tracking at small resolutions.
基金the Chinese Academy of Sciences Pioneer Hundred Talents Program and the Second Tibetan Plateau Scientific Expedition and Research Program(Grant No.2019QZKK0708)supported by a MEXT(Ministry of Education,Culture,Sports,Science and Technology)KAKENHI(Grants-in-Aid for Scientific Research)grant(Grant No.21H05203)Kobe University Strategic International Collaborative Research Grant(Type B Fostering Joint Research).
文摘The intracontinental subduction of a>200-km-long section of the Tajik-Tarim lithosphere beneath the Pamir Mountains is proposed to explain nearly 30 km of shortening in the Tajik fold-thrust belt and the Pamir uplift.Seismic imaging revealed that the upper slab was scraped and that the lower slab had subducted to a depth of>150 km.These features constitute the tectonic complexity of the Pamirs,as well as the thermal subduction mechanism involved,which remains poorly understood.Hence,in this study,high-resolution three-dimensional(3D)kinematic modeling is applied to investigate the thermal structure and geometry of the subducting slab beneath the Pamirs.The modeled slab configuration reveals distinct along-strike variations,with a steeply dipping slab beneath the southern Pamirs,a more gently inclined slab beneath the northern Pamirs,and apparent upper slab termination at shallow depths beneath the Pamirs.The thermal field reveals a cold slab core after delamination,with temperatures ranging from 400℃to 800℃,enveloped by a hotter mantle reaching~1400℃.The occurrence of intermediate-depth earthquakes aligns primarily with colder slab regions,particularly near the slab tear-off below the southwestern Pamirs,indicating a strong correlation between slab temperature and seismicity.In contrast,the northern Pamirs exhibit reduced seismicity at depth,which is likely associated with thermal weakening and delamination.The central Pamirs show a significant thermal anomaly caused by a concave slab,where the coldest crust does not descend deeply,further suggesting crustal detachment or mechanical failure.The lateral asymmetry in slab temperature possibly explains the mechanism of lateral tearing and differential slab-mantle coupling.
基金Open Access funding enabled and organized by Projekt DEAL.
文摘In this study,copper extraction from low-grade oxide-sulfide ores was investigated using a leaching method combined with response surface methodology(RSM)to optimize operational conditions and assess leaching kinetics.Given copper's extensive industrial applications,sustainable recovery from low-grade ores is critical.Five key parameters-acid concentration,leaching time,particle size,temperature,and solids percentage-were identified as major influences on copper recovery.The results revealed that leaching time and solids percentage,along with interactions between temperature-time and temperature-solids percentage,had the most significant effects.Optimal conditions for 80% copper recovery while minimizing iron recovery below 3% included an acid concentration of 1.21 mol L^(-1),a leaching time of 108 min,a particle size of 438μm,a temperature of 45℃,and a solids percentage of 18.2%.Leaching kinetics were analyzed using shrinking core models,with the Dickinson model best describing the process,showing an activation energy of 32.63 kJ mol^(-1),indicative of mixed diffusion and chemical reaction control.The final kinetic model effectively predicted the influence of key parameters.These findings highlight the importance of optimizing process variables and selecting suitable kinetic models to enhance extraction efficiency,reduce costs,and improve sustainability in copper recovery.
基金supported by the Biological Breeding-Major Projects in National Science and Technology(No.2023ZD0404405)the Earmarked Fund for China Agriculture Research System(No.CARS-pig-35)+2 种基金the National Natural Science Foundation of China(No.3227284,32302708)the 2115 Talent Development Program of China Agricultural University,the Chinese Universities Scientific Fund(No.2023TC196)the Seed Industry Revitalization Action Project of Guangdong Province(No.2024-XPY-06-001)。
文摘Background Multibreed genomic prediction(MBGP)is crucial for improving prediction accuracy for breeds with small populations,for which limited data are often available.Recent studies have demonstrated that partitioning the genome into nonoverlapping blocks to model heterogeneous genetic(co)variance in multitrait models can achieve higher joint prediction accuracy.However,the block partitioning method,a key factor influencing model performance,has not been extensively explored.Results We introduce mbBayesABLD,a novel Bayesian MBGP model that partitions each chromosome into nonoverlapping blocks on the basis of linkage disequilibrium(LD)patterns.In this model,marker effects within each block are assumed to follow normal distributions with block-specific parameters.We employ simulated data as well as empirical datasets from pigs and beans to assess genomic prediction accuracy across different models using cross-validation.The results demonstrate that mbBayesABLD significantly outperforms conventional MBGP models,such as GBLUP and BayesR.For the meat marbling score trait in pigs,compared with GBLUP,which does not account for heterogeneous genetic(co)variance,mbBayesABLD improves the prediction accuracy for the small-population breed Landrace by 15.6%.Furthermore,our findings indicate that a moderate level of similarity in LD patterns between breeds(with an average correlation of 0.6)is sufficient to improve the prediction accuracy of the target breed.Conclusions This study presents a novel LD block-based approach for multibreed genomic prediction.Our work provides a practical tool for livestock breeding programs and offers new insights into leveraging genetic diversity across breeds for improved genomic prediction.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272411 and 42007259).
文摘Deep rock engineering is affected by coupled thermo-hydro-mechanical(THM)-dynamic fields,necessitating the elucidation of the dynamic mechanical behavior and failure mechanisms.This study utilized a Multi-field Coupled Controlled Split Hopkinson Pressure Bar(MCC-SHPB)system to elucidate the cross-scale dynamic responses of rocks and the boundaries of failure modes under THM coupling.Impact tests were conducted on green sandstone under coupled conditions of temperature(25℃-80℃),confining pressure(0-15 MPa),and seepage water pressure(0-15 MPa).Scanning electron microscopy(SEM)microstructural characterization and COMSOL Multiphysics numerical simulations were conducted,and a dynamic constitutive theoretical framework and failure-prediction methodology were established.We investigated the impact toughness index(I_(t)),dynamic modulus(E_(d)),dynamic triaxial compressive strength(TCS_(d)),fragmentation degree(W),and failure modes of green sandstone under thermo-confining pressure-seepage-impact loading conditions.The key findings reveal that the(I_(t))reflects different energy regulation mechanisms across different confining pressure regimes.Thermal-microcrack interactions dominate at low pressure,and energy absorption prevails at high pressure.A triphasic dynamic modulus model captures stiffness evolution under energy-driven conditions,revealing cross-scale crack nucleation-propagation and fragment reorganization.The TCSd inflection point signifies energy dissipation shifts,causing nonlinear skeleton bearing-capacity degradation.A critical criterion based on the W was established to distinguish between the two failure modes and predict the unstable failure initiation.Numerical simulations were used to elucidate the effects of inertia-dominated crack propagation and stress wave interference,validating the critical criterion and the predictive accuracy of the theoretical model during cross-scale failure.This study provides a theoretical foundation for assessing the dynamic stability of rock masses subjected to multi-field coupling during deep resource exploitation.
基金funded by Scientific Research Deanship at University of Ha’il-Saudi Arabia through project number(RG-24014).
文摘We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers based on the Lambert W function:a voltage-driven V-Lambert solver for high-fidelity I–V computation and a resistance-driven R-Lambert solver designed for seamless integration in a closed-loop PV emulator.Unlike Taylor-linearized explicit models,our proposed formulation retains the exponential nonlinearity of the PV equations.It employs a numerically stable analytical evaluation that eliminates the need for lookup tables and root-finding,all while maintaining limited computational costs and a small memory footprint.The R-Lambert model is integrated into a buck-converter emulator equipped with a discrete PI regulator,which generates current references directly from sensed operating points,thus supporting hardware-constrained implementation.Comprehensive numerical experiments conducted on six commercial modules from various technologies(mono,poly,and multicrystalline)demonstrate significant accuracy improvements under the IEC EN 50530 near-MPP criterion:the V-Lambert solver reduces the±10%Vmpp band error by up to 61 times compared to an explicit-model baseline.Dynamic simulations under varying irradiance,temperature,and load conditions achieve millisecond-scale settling with accurate trajectory tracking.Additionally,processor-in-the-loop experimental validation on an embedded microcontroller supports the simulation results.By unifying exact analytical modeling with embedded realization,this work advances computer modeling for PV emulation,MPPT benchmarking,and controller verification in integrated renewable energy systems.
文摘In order to enhance the control performance of piezo-positioning system,the influence of hysteresis characteristics and its compensation method are studied.Hammerstein model is used to represent the dynamic hysteresis nonlinear characteristics of piezo-positioning actuator.The static nonlinear part and dynamic linear part of the Hammerstein model are represented by models obtained through the Prandtl-Ishlinskii(PI)model and Hankel matrix system identification method,respectively.This model demonstrates good generalization capability for typical input frequencies below 200 Hz.A sliding mode inverse compensation tracking control strategy based on P-I inverse model and integral augmentation is proposed.Experimental results show that compared with PID inverse compensation control and sliding mode control without inverse compensation,the sliding mode inverse compensation control has a more ideal step response and no overshoot,moreover,the settling time is only 6.2 ms.In the frequency domain,the system closed-loop tracking bandwidth reaches 119.9 Hz,and the disturbance rejection bandwidth reaches 86.2 Hz.The proposed control strategy can effectively compensate the hysteresis nonlinearity,and improve the tracking accuracy and antidisturbance capability of piezo-positioning system.
基金National Natural Science Foundation of China(Nos.42301473,42271424,42171397)Chinese Postdoctoral Innovation Talents Support Program(No.BX20230299)+2 种基金China Postdoctoral Science Foundation(No.2023M742884)Natural Science Foundation of Sichuan Province(Nos.24NSFSC2264,2025ZNSFSC0322)Key Research and Development Project of Sichuan Province(No.24ZDYF0633).
文摘As a key node of modern transportation network,the informationization management of road tunnels is crucial to ensure the operation safety and traffic efficiency.However,the existing tunnel vehicle modeling methods generally have problems such as insufficient 3D scene description capability and low dynamic update efficiency,which are difficult to meet the demand of real-time accurate management.For this reason,this paper proposes a vehicle twin modeling method for road tunnels.This approach starts from the actual management needs,and supports multi-level dynamic modeling from vehicle type,size to color by constructing a vehicle model library that can be flexibly invoked;at the same time,semantic constraint rules with geometric layout,behavioral attributes,and spatial relationships are designed to ensure that the virtual model matches with the real model with a high degree of similarity;ultimately,the prototype system is constructed and the case region is selected for the case study,and the dynamic vehicle status in the tunnel is realized by integrating real-time monitoring data with semantic constraints for precise virtual-real mapping.Finally,the prototype system is constructed and case experiments are conducted in selected case areas,which are combined with real-time monitoring data to realize dynamic updating and three-dimensional visualization of vehicle states in tunnels.The experiments show that the proposed method can run smoothly with an average rendering efficiency of 17.70 ms while guaranteeing the modeling accuracy(composite similarity of 0.867),which significantly improves the real-time and intuitive tunnel management.The research results provide reliable technical support for intelligent operation and emergency response of road tunnels,and offer new ideas for digital twin modeling of complex scenes.
基金Under the auspices of National Natural Science Foundation of China(No.42330510)。
文摘With the development of smart cities and smart technologies,parks,as functional units of the city,are facing smart transformation.The development of smart parks can help address challenges of technology integration within urban spaces and serve as testbeds for exploring smart city planning and governance models.Information models facilitate the effective integration of technology into space.Building Information Modeling(BIM)and City Information Modeling(CIM)have been widely used in urban construction.However,the existing information models have limitations in the application of the park,so it is necessary to develop an information model suitable for the park.This paper first traces the evolution of park smart transformation,reviews the global landscape of smart park development,and identifies key trends and persistent challenges.Addressing the particularities of parks,the concept of Park Information Modeling(PIM)is proposed.PIM leverages smart technologies such as artificial intelligence,digital twins,and collaborative sensing to help form a‘space-technology-system’smart structure,enabling systematic management of diverse park spaces,addressing the deficiency in park-level information models,and aiming to achieve scale articulation between BIM and CIM.Finally,through a detailed top-level design application case study of the Nanjing Smart Education Park in China,this paper illustrates the translation process of the PIM concept into practice,showcasing its potential to provide smart management tools for park managers and enhance services for park stakeholders,although further empirical validation is required.
基金National Natural Science Foundation of China(71690233,71971213,71901214)。
文摘Architecture framework has become an effective method recently to describe the system of systems(SoS)architecture,such as the United States(US)Department of Defense Architecture Framework Version 2.0(DoDAF2.0).As a viewpoint in DoDAF2.0,the operational viewpoint(OV)describes operational activities,nodes,and resource flows.The OV models are important for SoS architecture development.However,as the SoS complexity increases,constructing OV models with traditional methods exposes shortcomings,such as inefficient data collection and low modeling standards.Therefore,we propose an intelligent modeling method for five OV models,including operational resource flow OV-2,organizational relationships OV-4,operational activity hierarchy OV-5a,operational activities model OV-5b,and operational activity sequences OV-6c.The main idea of the method is to extract OV architecture data from text and generate interoperable OV models.First,we construct the OV meta model based on the DoDAF2.0 meta model(DM2).Second,OV architecture named entities is recognized from text based on the bidirectional long short-term memory and conditional random field(BiLSTM-CRF)model.And OV architecture relationships are collected with relationship extraction rules.Finally,we define the generation rules for OV models and develop an OV modeling tool.We use unmanned surface vehicles(USV)swarm target defense SoS architecture as a case to verify the feasibility and effectiveness of the intelligent modeling method.
文摘Using a dynamic laser monitoring technique,the solubility of 3-nitro-1,2,4-triazole-5-one(NTO)was investigated in two different binary systems,namely hydroxylamine nitrate(HAN)-water and boric acid(HB)-water ranging from 278.15 K to 318.15 K.The solubility in each system was found to be positively correlated with temperature.Furthermore,solubility data were analyzed using four equations:the modified Apelblat equation,Van’t Hoff equation,λh equation and CNIBS/R-K equations,and they provided satisfactory results for both two systems.The average root-mean-square deviation(105RMSD)values for these models were less than 13.93.Calculations utilizing the Van’t Hoff equation and Gibbs equations facilitated the derivation of apparent thermodynamic properties of NTO dissolution in the two systems,including values for Gibbs free energy,enthalpy and entropy.The%ζ_(H)is larger than%ζ_(TS),and all the%ζ_(H)data are≥58.63%,indicating that the enthalpy make a greater contribution than entropy to theΔG_(soln)^(Θ).
基金Supported by Gansu Province Joint Fund General Program,No.24JRRA878Gansu Provincial Science and Technology Program Project,No.24JRRA1020+2 种基金Gansu Province Key Talent Program,No.2025RCXM006Teaching Research and Reform Program for Postgraduate Education at Gansu University of Traditional Chinese Medicine(GUSTCM),No.YBXM-202406Special Fund for Mentors of“Qihuang Talents”in the First-Level Discipline of Chinese Medicine,No.ZYXKBD-202415。
文摘BACKGROUND Emerging evidence implicates Candida albicans(C.albicans)in human oncogenesis.Notably,studies have supported its involvement in regulating outcomes in colorectal cancer(CRC).This study investigated the paradoxical role of C.albicans in CRC,aiming to determine whether it promotes or suppresses tumor development,with a focus on the mechanistic basis linked to its metabolic profile.AIM To investigate the dual role of C.albicans in the development and progression of CRC through metabolite profiling and to establish a prognostic model that integrates the microbial and metabolic interactions in CRC,providing insights into potential therapeutic strategies and clinical outcomes.METHODSA prognostic model integrating C. albicans with CRC was developed, incorporating enrichment analysis, immuneinfiltration profiling, survival analysis, Mendelian randomization, single-cell sequencing, and spatial transcriptomics.The effects of the C. albicans metabolite mixture on CRC cells were subsequently validated in vitro. Theprimary metabolite composition was characterized using liquid chromatography-mass spectrometry.RESULTSA prognostic model based on five specific mRNA markers, EHD4, LIME1, GADD45B, TIMP1, and FDFT1, wasestablished. The C. albicans metabolite mixture significantly reduced CRC cell viability. Post-treatment analysisrevealed a significant decrease in gene expression in HT29 cells, while the expression levels of TIMP1, EHD4, andGADD45B were significantly elevated in HCT116 cells. Conversely, LIME1 expression and that of other CRC celllines showed reductions. In normal colonic epithelial cells (NCM460), GADD45B, TIMP1, and FDFT1 expressionlevels were significantly increased, while LIME1 and EHD4 levels were markedly reduced. Following metabolitetreatment, the invasive and migratory capabilities of NCM460, HT29, and HCT116 cells were reduced. Quantitativeanalysis of extracellular ATP post-treatment showed a significant elevation (P < 0.01). The C. albicans metabolitemixture had no effect on reactive oxygen species accumulation in CRC cells but led to a reduction in mitochondrialmembrane potential, increased intracellular lipid peroxidation, and induced apoptosis. Metabolomic profilingrevealed significant alterations, with 516 metabolites upregulated and 531 downregulated.CONCLUSIONThis study introduced a novel prognostic model for CRC risk assessment. The findings suggested that the C.albicans metabolite mixture exerted an inhibitory effect on CRC initiation.
基金supported by the National Natural Science Foundation of China(42250101)the Macao Foundation。
文摘Earth’s internal core and crustal magnetic fields,as measured by geomagnetic satellites like MSS-1(Macao Science Satellite-1)and Swarm,are vital for understanding core dynamics and tectonic evolution.To model these internal magnetic fields accurately,data selection based on specific criteria is often employed to minimize the influence of rapidly changing current systems in the ionosphere and magnetosphere.However,the quantitative impact of various data selection criteria on internal geomagnetic field modeling is not well understood.This study aims to address this issue and provide a reference for constructing and applying geomagnetic field models.First,we collect the latest MSS-1 and Swarm satellite magnetic data and summarize widely used data selection criteria in geomagnetic field modeling.Second,we briefly describe the method to co-estimate the core,crustal,and large-scale magnetospheric fields using satellite magnetic data.Finally,we conduct a series of field modeling experiments with different data selection criteria to quantitatively estimate their influence.Our numerical experiments confirm that without selecting data from dark regions and geomagnetically quiet times,the resulting internal field differences at the Earth’s surface can range from tens to hundreds of nanotesla(nT).Additionally,we find that the uncertainties introduced into field models by different data selection criteria are significantly larger than the measurement accuracy of modern geomagnetic satellites.These uncertainties should be considered when utilizing constructed magnetic field models for scientific research and applications.
