Airborne LiDAR(Light Detection and Ranging)is an evolving high-tech active remote sensing technology that has the capability to acquire large-area topographic data and can quickly generate DEM(Digital Elevation Model)...Airborne LiDAR(Light Detection and Ranging)is an evolving high-tech active remote sensing technology that has the capability to acquire large-area topographic data and can quickly generate DEM(Digital Elevation Model)products.Combined with image data,this technology can further enrich and extract spatial geographic information.However,practically,due to the limited operating range of airborne LiDAR and the large area of task,it would be necessary to perform registration and stitching process on point clouds of adjacent flight strips.By eliminating grow errors,the systematic errors in the data need to be effectively reduced.Thus,this paper conducts research on point cloud registration methods in urban building areas,aiming to improve the accuracy and processing efficiency of airborne LiDAR data.Meanwhile,an improved post-ICP(Iterative Closest Point)point cloud registration method was proposed in this study to determine the accurate registration and efficient stitching of point clouds,which capable to provide a potential technical support for applicants in related field.展开更多
A new object-oriented method has been developed for the extraction of Mars rocks from Mars rover data. It is based on a combination of Mars rover imagery and 3D point cloud data. First, Navcam or Pancam images taken b...A new object-oriented method has been developed for the extraction of Mars rocks from Mars rover data. It is based on a combination of Mars rover imagery and 3D point cloud data. First, Navcam or Pancam images taken by the Mars rovers are segmented into homogeneous objects with a mean-shift algorithm. Then, the objects in the segmented images are classified into small rock candidates, rock shadows, and large objects. Rock shadows and large objects are considered as the regions within which large rocks may exist. In these regions, large rock candidates are extracted through ground-plane fitting with the 3D point cloud data. Small and large rock candidates are combined and postprocessed to obtain the final rock extraction results. The shape properties of the rocks （angularity, circularity, width, height, and width-height ratio） have been calculated for subsequent ~eological studies.展开更多
Building outline extraction from segmented point clouds is a critical step of building footprint generation.Existing methods for this task are often based on the convex hull and α-shape algorithm.There are also some ...Building outline extraction from segmented point clouds is a critical step of building footprint generation.Existing methods for this task are often based on the convex hull and α-shape algorithm.There are also some methods using grids and Delaunay triangulation.The common challenge of these methods is the determination of proper parameters.While deep learning-based methods have shown promise in reducing the impact and dependence on parameter selection,their reliance on datasets with ground truth information limits the generalization of these methods.In this study,a novel unsupervised approach,called PH-shape,is proposed to address the aforementioned challenge.The methods of Persistence Homology(PH)and Fourier descriptor are introduced into the task of building outline extraction.The PH from the theory of topological data analysis supports the automatic and adaptive determination of proper buffer radius,thus enabling the parameter-adaptive extraction of building outlines through buffering and“inverse”buffering.The quantitative and qualitative experiment results on two datasets with different point densities demonstrate the effectiveness of the proposed approach in the face of various building types,interior boundaries,and the density variation in the point cloud data of one building.The PH-supported parameter adaptivity helps the proposed approach overcome the challenge of parameter determination and data variations and achieve reliable extraction of building outlines.展开更多
Tunnel deformation monitoring is a crucial task to evaluate tunnel stability during the metro operation period.Terrestrial Laser Scanning(TLS)can collect high density and high accuracy point cloud data in a few minute...Tunnel deformation monitoring is a crucial task to evaluate tunnel stability during the metro operation period.Terrestrial Laser Scanning(TLS)can collect high density and high accuracy point cloud data in a few minutes as an innovation technique,which provides promising applications in tunnel deformation monitoring.Here,an efficient method for extracting tunnel cross-sections and convergence analysis using dense TLS point cloud data is proposed.First,the tunnel orientation is determined using principal component analysis(PCA)in the Euclidean plane.Two control points are introduced to detect and remove the unsuitable points by using point cloud division and then the ground points are removed by defining an elevation value width of 0.5 m.Next,a z-score method is introduced to detect and remove the outlies.Because the tunnel cross-section’s standard shape is round,the circle fitting is implemented using the least-squares method.Afterward,the convergence analysis is made at the angles of 0°,30°and 150°.The proposed approach’s feasibility is tested on a TLS point cloud of a Nanjing subway tunnel acquired using a FARO X330 laser scanner.The results indicate that the proposed methodology achieves an overall accuracy of 1.34 mm,which is also in agreement with the measurements acquired by a total station instrument.The proposed methodology provides new insights and references for the applications of TLS in tunnel deformation monitoring,which can also be extended to other engineering applications.展开更多
In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit so...In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit software to extract geometric information about the indoor environment.Furthermore,we proposed a method for constructing indoor elements based on parametric components.The research outcomes of this paper will offer new methods and tools for indoor space modeling and design.The approach of indoor space modeling based on 3D laser point cloud data and parametric component construction can enhance modeling efficiency and accuracy,providing architects,interior designers,and decorators with a better working platform and design reference.展开更多
Rice variety selection and quality inspection are key links in rice planting.Compared with two-dimensional images,three-dimensional information on rice seeds shows the appearance characteristics of rice seeds more com...Rice variety selection and quality inspection are key links in rice planting.Compared with two-dimensional images,three-dimensional information on rice seeds shows the appearance characteristics of rice seeds more comprehensively and accurately.This study proposed a rice variety classification method using three-dimensional point cloud data of the surface of rice seeds combined with a deep learning network to achieve the rapid and accurate identification of rice varieties.First,a point cloud collection platform was set up with a Raytrix light field camera as the core to collect three-dimensional point cloud data on the surface of rice seeds;then,the collected point cloud was filled,filtered and smoothed;after that,the point cloud segmentation is based on the RANSAC algorithm,and the point cloud downsampling is based on a combination of random sampling algorithm and voxel grid filtering algorithm.Finally,the processed point cloud was input to the improved PointNet network for feature extraction and species classification.The improved PointNet network added a cross-level feature connection structure,made full use of features at different levels,and better extracted the surface structure features of rice seeds.After testing,the improved PointNet model had an average classification accuracy of 89.4%for eight varieties of rice,which was 1.2%higher than that of the PointNet model.The method proposed in this study combined deep learning and point cloud data to achieve the efficient classification of rice varieties.展开更多
Surfaces of stored grain bulk are often reconstructed from organized point sets with noise by 3-D laser scanner in an online measuring system.As a result,denoising is an essential procedure in processing point cloud d...Surfaces of stored grain bulk are often reconstructed from organized point sets with noise by 3-D laser scanner in an online measuring system.As a result,denoising is an essential procedure in processing point cloud data for more accurate surface reconstruction and grain volume calculation.A classified denoising method was presented in this research for noise removal from point cloud data of the grain bulk surface.Based on the distribution characteristics of cloud point data,the noisy points were divided into three types:The first and second types of the noisy points were either sparse points or small point cloud data deviating and suspending from the main point cloud data,which could be deleted directly by a grid method;the third type of the noisy points was mixed with the main body of point cloud data,which were most difficult to distinguish.The point cloud data with those noisy points were projected into a horizontal plane.An image denoising method,discrete wavelet threshold(DWT)method,was applied to delete the third type of the noisy points.Three kinds of denoising methods including average filtering method,median filtering method and DWT method were applied respectively and compared for denoising the point cloud data.Experimental results show that the proposed method remains the most of the details and obtains the lowest average value of RMSE(Root Mean Square Error,0.219)as well as the lowest relative error of grain volume(0.086%)compared with the other two methods.Furthermore,the proposed denoising method could not only achieve the aim of removing noisy points,but also improve self-adaptive ability according to the characteristics of point cloud data of grain bulk surface.The results from this research also indicate that the proposed method is effective for denoising noisy points and provides more accurate data for calculating grain volume.展开更多
Recent applications of digital photogrammetry in forestry have highlighted its utility as a viable mensuration technique.However,in tropical regions little research has been done on the accuracy of this approach for s...Recent applications of digital photogrammetry in forestry have highlighted its utility as a viable mensuration technique.However,in tropical regions little research has been done on the accuracy of this approach for stem volume calculation.In this study,the performance of Structure from Motion photogrammetry for estimating individual tree stem volume in relation to traditional approaches was evaluated.We selected 30 trees from five savanna species growing at the periphery of the W National Park in northern Benin and measured their circumferences at different heights using traditional tape and clinometer.Stem volumes of sample trees were estimated from the measured circumferences using nine volumetric formulae for solids of revolution,including cylinder,cone,paraboloid,neiloid and their respective fustrums.Each tree was photographed and stem volume determined using a taper function derived from tri-dimensional stem models.This reference volume was compared with the results of formulaic estimations.Tree stem profiles were further decomposed into different portions,approximately corresponding to the stump,butt logs and logs,and the suitability of each solid of revolution was assessed for simulating the resulting shapes.Stem volumes calculated using the fustrums of paraboloid and neiloid formulae were the closest to reference volumes with a bias and root mean square error of 8.0%and 24.4%,respectively.Stems closely resembled fustrums of a paraboloid and a neiloid.Individual stem portions assumed different solids as follows:fustrums of paraboloid and neiloid were more prevalent from the stump to breast height,while a paraboloid closely matched stem shapes beyond this point.Therefore,a more accurate stem volumetric estimate was attained when stems were considered as a composite of at least three geometric solids.展开更多
Swarm robot systems are an important application of autonomous unmanned surface vehicles on water surfaces.For monitoring natural environments and conducting security activities within a certain range using a surface ...Swarm robot systems are an important application of autonomous unmanned surface vehicles on water surfaces.For monitoring natural environments and conducting security activities within a certain range using a surface vehicle,the swarm robot system is more efficient than the operation of a single object as the former can reduce cost and save time.It is necessary to detect adjacent surface obstacles robustly to operate a cluster of unmanned surface vehicles.For this purpose,a LiDAR(light detection and ranging)sensor is used as it can simultaneously obtain 3D information for all directions,relatively robustly and accurately,irrespective of the surrounding environmental conditions.Although the GPS(global-positioning-system)error range exists,obtaining measurements of the surface-vessel position can still ensure stability during platoon maneuvering.In this study,a three-layer convolutional neural network is applied to classify types of surface vehicles.The aim of this approach is to redefine the sparse 3D point cloud data as 2D image data with a connotative meaning and subsequently utilize this transformed data for object classification purposes.Hence,we have proposed a descriptor that converts the 3D point cloud data into 2D image data.To use this descriptor effectively,it is necessary to perform a clustering operation that separates the point clouds for each object.We developed voxel-based clustering for the point cloud clustering.Furthermore,using the descriptor,3D point cloud data can be converted into a 2D feature image,and the converted 2D image is provided as an input value to the network.We intend to verify the validity of the proposed 3D point cloud feature descriptor by using experimental data in the simulator.Furthermore,we explore the feasibility of real-time object classification within this framework.展开更多
With the rapid development of reality capture methods,such as laser scanning and oblique photogrammetry,point cloud data have become the third most important data source,after vector maps and imagery.Point cloud data ...With the rapid development of reality capture methods,such as laser scanning and oblique photogrammetry,point cloud data have become the third most important data source,after vector maps and imagery.Point cloud data also play an increasingly important role in scientific research and engineering in the fields of Earth science,spatial cognition,and smart cities.However,how to acquire high-quality three-dimensional(3D)geospatial information from point clouds has become a scientific frontier,for which there is an urgent demand in the fields of surveying and mapping,as well as geoscience applications.To address the challenges mentioned above,point cloud intelligence came into being.This paper summarizes the state-of-the-art of point cloud intelligence,with regard to acquisition equipment,intelligent processing,scientific research,and engineering applications.For this purpose,we refer to a recent project on the hybrid georeferencing of images and LiDAR data for high-quality point cloud collection,as well as a current benchmark for the semantic segmentation of high-resolution 3D point clouds.These projects were conducted at the Institute for Photogrammetry,the University of Stuttgart,which was initially headed by the late Prof.Ackermann.Finally,the development prospects of point cloud intelligence are summarized.展开更多
Roof vertex information is vital for 3D roof structures.Reconstructing 3D roof structures from point cloud data using traditional methods remains a challenge because their extracted roof vertices are affected by uncer...Roof vertex information is vital for 3D roof structures.Reconstructing 3D roof structures from point cloud data using traditional methods remains a challenge because their extracted roof vertices are affected by uncertainty and additional errors from roof plane segmentation and supplementary sub-steps for extracting primitives.In this study,instead of segmenting roof planes and then extracting primitives based on them,a flexible rule-based method is proposed to directly detect the vertices of building roofs from point cloud data without the requirement of training data.The point cloud data is first voxelized with a dominant direction-based rotation.Based on the different features of the interior roof points and vertices,rules for voxel filtering and structure line determination are defined to extract the roof vertices.The experimental results on a custom dataset in Trondheim,Norway demonstrate that the proposed method can effectively and accurately extract roof vertices from point cloud data.The comparative experimental results with an unfine-tuned deep learning-based method on custom and benchmark datasets with different point densities further show that the proposed method has good generalization and can adapt to changes of datasets.展开更多
基金Guangxi Key Laboratory of Spatial Information and Geomatics(21-238-21-12)Guangxi Young and Middle-aged Teachers’Research Fundamental Ability Enhancement Project(2023KY1196).
文摘Airborne LiDAR(Light Detection and Ranging)is an evolving high-tech active remote sensing technology that has the capability to acquire large-area topographic data and can quickly generate DEM(Digital Elevation Model)products.Combined with image data,this technology can further enrich and extract spatial geographic information.However,practically,due to the limited operating range of airborne LiDAR and the large area of task,it would be necessary to perform registration and stitching process on point clouds of adjacent flight strips.By eliminating grow errors,the systematic errors in the data need to be effectively reduced.Thus,this paper conducts research on point cloud registration methods in urban building areas,aiming to improve the accuracy and processing efficiency of airborne LiDAR data.Meanwhile,an improved post-ICP(Iterative Closest Point)point cloud registration method was proposed in this study to determine the accurate registration and efficient stitching of point clouds,which capable to provide a potential technical support for applicants in related field.
基金supported by the National Natural Science Foundation of China(Nos.41171355and41002120)
文摘A new object-oriented method has been developed for the extraction of Mars rocks from Mars rover data. It is based on a combination of Mars rover imagery and 3D point cloud data. First, Navcam or Pancam images taken by the Mars rovers are segmented into homogeneous objects with a mean-shift algorithm. Then, the objects in the segmented images are classified into small rock candidates, rock shadows, and large objects. Rock shadows and large objects are considered as the regions within which large rocks may exist. In these regions, large rock candidates are extracted through ground-plane fitting with the 3D point cloud data. Small and large rock candidates are combined and postprocessed to obtain the final rock extraction results. The shape properties of the rocks （angularity, circularity, width, height, and width-height ratio） have been calculated for subsequent ~eological studies.
基金supported by NTNU Digital project[grant number 81771593].
文摘Building outline extraction from segmented point clouds is a critical step of building footprint generation.Existing methods for this task are often based on the convex hull and α-shape algorithm.There are also some methods using grids and Delaunay triangulation.The common challenge of these methods is the determination of proper parameters.While deep learning-based methods have shown promise in reducing the impact and dependence on parameter selection,their reliance on datasets with ground truth information limits the generalization of these methods.In this study,a novel unsupervised approach,called PH-shape,is proposed to address the aforementioned challenge.The methods of Persistence Homology(PH)and Fourier descriptor are introduced into the task of building outline extraction.The PH from the theory of topological data analysis supports the automatic and adaptive determination of proper buffer radius,thus enabling the parameter-adaptive extraction of building outlines through buffering and“inverse”buffering.The quantitative and qualitative experiment results on two datasets with different point densities demonstrate the effectiveness of the proposed approach in the face of various building types,interior boundaries,and the density variation in the point cloud data of one building.The PH-supported parameter adaptivity helps the proposed approach overcome the challenge of parameter determination and data variations and achieve reliable extraction of building outlines.
基金National Natural Science Foundation of China(No.41801379)Fundamental Research Funds for the Central Universities(No.2019B08414)National Key R&D Program of China(No.2016YFC0401801)。
文摘Tunnel deformation monitoring is a crucial task to evaluate tunnel stability during the metro operation period.Terrestrial Laser Scanning(TLS)can collect high density and high accuracy point cloud data in a few minutes as an innovation technique,which provides promising applications in tunnel deformation monitoring.Here,an efficient method for extracting tunnel cross-sections and convergence analysis using dense TLS point cloud data is proposed.First,the tunnel orientation is determined using principal component analysis(PCA)in the Euclidean plane.Two control points are introduced to detect and remove the unsuitable points by using point cloud division and then the ground points are removed by defining an elevation value width of 0.5 m.Next,a z-score method is introduced to detect and remove the outlies.Because the tunnel cross-section’s standard shape is round,the circle fitting is implemented using the least-squares method.Afterward,the convergence analysis is made at the angles of 0°,30°and 150°.The proposed approach’s feasibility is tested on a TLS point cloud of a Nanjing subway tunnel acquired using a FARO X330 laser scanner.The results indicate that the proposed methodology achieves an overall accuracy of 1.34 mm,which is also in agreement with the measurements acquired by a total station instrument.The proposed methodology provides new insights and references for the applications of TLS in tunnel deformation monitoring,which can also be extended to other engineering applications.
基金supported by the Innovation and Entrepreneurship Training Program Topic for College Students of North China University of Technology in 2023.
文摘In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit software to extract geometric information about the indoor environment.Furthermore,we proposed a method for constructing indoor elements based on parametric components.The research outcomes of this paper will offer new methods and tools for indoor space modeling and design.The approach of indoor space modeling based on 3D laser point cloud data and parametric component construction can enhance modeling efficiency and accuracy,providing architects,interior designers,and decorators with a better working platform and design reference.
基金supported by the National Natural Science Foundation of China Youth Fund Project(Grant No.51305182)the Ministry of Agriculture Key Laboratory of Modern Agricultural Equipment(Grant No.201602004).
文摘Rice variety selection and quality inspection are key links in rice planting.Compared with two-dimensional images,three-dimensional information on rice seeds shows the appearance characteristics of rice seeds more comprehensively and accurately.This study proposed a rice variety classification method using three-dimensional point cloud data of the surface of rice seeds combined with a deep learning network to achieve the rapid and accurate identification of rice varieties.First,a point cloud collection platform was set up with a Raytrix light field camera as the core to collect three-dimensional point cloud data on the surface of rice seeds;then,the collected point cloud was filled,filtered and smoothed;after that,the point cloud segmentation is based on the RANSAC algorithm,and the point cloud downsampling is based on a combination of random sampling algorithm and voxel grid filtering algorithm.Finally,the processed point cloud was input to the improved PointNet network for feature extraction and species classification.The improved PointNet network added a cross-level feature connection structure,made full use of features at different levels,and better extracted the surface structure features of rice seeds.After testing,the improved PointNet model had an average classification accuracy of 89.4%for eight varieties of rice,which was 1.2%higher than that of the PointNet model.The method proposed in this study combined deep learning and point cloud data to achieve the efficient classification of rice varieties.
基金National Natural Science Foundation of China(No.50975121)Jilin Province Science and Technology Development Plan Item(No.20130522150JH)2013 Jilin Province Science Foundation for Post Doctorate Research(No.RB201361).
文摘Surfaces of stored grain bulk are often reconstructed from organized point sets with noise by 3-D laser scanner in an online measuring system.As a result,denoising is an essential procedure in processing point cloud data for more accurate surface reconstruction and grain volume calculation.A classified denoising method was presented in this research for noise removal from point cloud data of the grain bulk surface.Based on the distribution characteristics of cloud point data,the noisy points were divided into three types:The first and second types of the noisy points were either sparse points or small point cloud data deviating and suspending from the main point cloud data,which could be deleted directly by a grid method;the third type of the noisy points was mixed with the main body of point cloud data,which were most difficult to distinguish.The point cloud data with those noisy points were projected into a horizontal plane.An image denoising method,discrete wavelet threshold(DWT)method,was applied to delete the third type of the noisy points.Three kinds of denoising methods including average filtering method,median filtering method and DWT method were applied respectively and compared for denoising the point cloud data.Experimental results show that the proposed method remains the most of the details and obtains the lowest average value of RMSE(Root Mean Square Error,0.219)as well as the lowest relative error of grain volume(0.086%)compared with the other two methods.Furthermore,the proposed denoising method could not only achieve the aim of removing noisy points,but also improve self-adaptive ability according to the characteristics of point cloud data of grain bulk surface.The results from this research also indicate that the proposed method is effective for denoising noisy points and provides more accurate data for calculating grain volume.
基金The work was supported by the International Foundation for Science(Grant No:I-1-D-60661).
文摘Recent applications of digital photogrammetry in forestry have highlighted its utility as a viable mensuration technique.However,in tropical regions little research has been done on the accuracy of this approach for stem volume calculation.In this study,the performance of Structure from Motion photogrammetry for estimating individual tree stem volume in relation to traditional approaches was evaluated.We selected 30 trees from five savanna species growing at the periphery of the W National Park in northern Benin and measured their circumferences at different heights using traditional tape and clinometer.Stem volumes of sample trees were estimated from the measured circumferences using nine volumetric formulae for solids of revolution,including cylinder,cone,paraboloid,neiloid and their respective fustrums.Each tree was photographed and stem volume determined using a taper function derived from tri-dimensional stem models.This reference volume was compared with the results of formulaic estimations.Tree stem profiles were further decomposed into different portions,approximately corresponding to the stump,butt logs and logs,and the suitability of each solid of revolution was assessed for simulating the resulting shapes.Stem volumes calculated using the fustrums of paraboloid and neiloid formulae were the closest to reference volumes with a bias and root mean square error of 8.0%and 24.4%,respectively.Stems closely resembled fustrums of a paraboloid and a neiloid.Individual stem portions assumed different solids as follows:fustrums of paraboloid and neiloid were more prevalent from the stump to breast height,while a paraboloid closely matched stem shapes beyond this point.Therefore,a more accurate stem volumetric estimate was attained when stems were considered as a composite of at least three geometric solids.
基金supported by the Future Challenge Program through the Agency for Defense Development funded by the Defense Acquisition Program Administration (No.UC200015RD)。
文摘Swarm robot systems are an important application of autonomous unmanned surface vehicles on water surfaces.For monitoring natural environments and conducting security activities within a certain range using a surface vehicle,the swarm robot system is more efficient than the operation of a single object as the former can reduce cost and save time.It is necessary to detect adjacent surface obstacles robustly to operate a cluster of unmanned surface vehicles.For this purpose,a LiDAR(light detection and ranging)sensor is used as it can simultaneously obtain 3D information for all directions,relatively robustly and accurately,irrespective of the surrounding environmental conditions.Although the GPS(global-positioning-system)error range exists,obtaining measurements of the surface-vessel position can still ensure stability during platoon maneuvering.In this study,a three-layer convolutional neural network is applied to classify types of surface vehicles.The aim of this approach is to redefine the sparse 3D point cloud data as 2D image data with a connotative meaning and subsequently utilize this transformed data for object classification purposes.Hence,we have proposed a descriptor that converts the 3D point cloud data into 2D image data.To use this descriptor effectively,it is necessary to perform a clustering operation that separates the point clouds for each object.We developed voxel-based clustering for the point cloud clustering.Furthermore,using the descriptor,3D point cloud data can be converted into a 2D feature image,and the converted 2D image is provided as an input value to the network.We intend to verify the validity of the proposed 3D point cloud feature descriptor by using experimental data in the simulator.Furthermore,we explore the feasibility of real-time object classification within this framework.
基金supported by the National Natural Science Foundation Project(No.42130105)Key Laboratory of Spatial-temporal Big Data Analysis and Application of Natural Resources in_Megacities,MNR(No.KFKT-2022-01).
文摘With the rapid development of reality capture methods,such as laser scanning and oblique photogrammetry,point cloud data have become the third most important data source,after vector maps and imagery.Point cloud data also play an increasingly important role in scientific research and engineering in the fields of Earth science,spatial cognition,and smart cities.However,how to acquire high-quality three-dimensional(3D)geospatial information from point clouds has become a scientific frontier,for which there is an urgent demand in the fields of surveying and mapping,as well as geoscience applications.To address the challenges mentioned above,point cloud intelligence came into being.This paper summarizes the state-of-the-art of point cloud intelligence,with regard to acquisition equipment,intelligent processing,scientific research,and engineering applications.For this purpose,we refer to a recent project on the hybrid georeferencing of images and LiDAR data for high-quality point cloud collection,as well as a current benchmark for the semantic segmentation of high-resolution 3D point clouds.These projects were conducted at the Institute for Photogrammetry,the University of Stuttgart,which was initially headed by the late Prof.Ackermann.Finally,the development prospects of point cloud intelligence are summarized.
基金supported by NTNU Digital project(project No.81771593).
文摘Roof vertex information is vital for 3D roof structures.Reconstructing 3D roof structures from point cloud data using traditional methods remains a challenge because their extracted roof vertices are affected by uncertainty and additional errors from roof plane segmentation and supplementary sub-steps for extracting primitives.In this study,instead of segmenting roof planes and then extracting primitives based on them,a flexible rule-based method is proposed to directly detect the vertices of building roofs from point cloud data without the requirement of training data.The point cloud data is first voxelized with a dominant direction-based rotation.Based on the different features of the interior roof points and vertices,rules for voxel filtering and structure line determination are defined to extract the roof vertices.The experimental results on a custom dataset in Trondheim,Norway demonstrate that the proposed method can effectively and accurately extract roof vertices from point cloud data.The comparative experimental results with an unfine-tuned deep learning-based method on custom and benchmark datasets with different point densities further show that the proposed method has good generalization and can adapt to changes of datasets.
