Individual participation of pollutants in the pollution load should be estimated even if roughly for the appropriate environmental management of a river basin.It is difficult to identify the sources and to quantify th...Individual participation of pollutants in the pollution load should be estimated even if roughly for the appropriate environmental management of a river basin.It is difficult to identify the sources and to quantify the load, especially in modeling nonpoint source.In this study a revised model was established by integrating point and nonpoint sources into one-dimensional Streeter-Phelps(S-P) model on the basis of real-time hydrologic data and surface water quality monitoring data in the Jilin Reach of the Songhua River Basin.Chemical oxygen demand(COD) and ammonia nitrogen(NH 3-N) loads were estimated.Results showed that COD loads of point source and nonpoint source were 134 958 t/yr and 86 209 t/yr, accounting for 61.02% and 38.98% of total loads, respectively.NH 3-N loads of point source and nonpoint source were 16 739 t/yr and 14 272 t/yr, accounting for 53.98% and 46.02%, respectively.Point source pollution was stronger than nonpoint source pollution in the study area at present.The water quality of upstream was better than that of downstream of the rivers and cities.It is indispensable to treat industrial wastewater and municipal sewage out of point sources, to adopt the best management practices to control diffuse pollutants from agricultural land and urban surface runoff in improving water quality of the Songhua River Basin.The revised S-P model can be successfully used to identify pollution source and quantify point source and nonpoint source loads by calibrating and validating.展开更多
Advancing the understanding of the spatial aspects of air pollution in the city regional environment is an area where improved methods can be of great benefit to exposure assessment and policy support. We created land...Advancing the understanding of the spatial aspects of air pollution in the city regional environment is an area where improved methods can be of great benefit to exposure assessment and policy support. We created land use regression （LUR） models for SO2, NO2 and PMI0 for Tianjin, China. Traffic volumes, road networks, land use data, population density, meteorological conditions, physical conditions and satellite-derived greenness, brightness and wetness were used for predicting SOa, NO2 and PMt0 concentrations. We incorporated data on industrial point sources to improve LUR model performance. In order to consider the impact of different sources, we calculated the PSIndex, LSIndex and area of different land use types （agricultural land, industrial land, commercial land, residential land, green space and water area） within different buffer radii （1 to 20 kin）. This method makes up for the lack of consideration of source impact based on the LUR model. Remote sensing-derived variables were significantly correlated with gaseous pollutant concentrations such as SO2 and NO2. R2 values of the multiple linear regression equations for SO2, NO2 and PM10 were 0.78, 0.89 and 0.84, respectively, and the RMSE values were 0.32, 0.18 and 0.21, respectively. Model predictions at validation monitoring sites went well with predictions generally within 15% of measured values. Compared to the relationship between dependent variables and simple variables （such as traffic variables or meteorological condition variables）, the relationship between dependent variables and integrated variables was more consistent with a linear relationship. Such integration has a discernable influence on both the overall model prediction and health effects assessment on the spatial distribution of air pollution in the city region.展开更多
In this study, a point source mathematical model is proposed to describe the diffusion of adenosine di-phosphate (ADP) from either damaged red blood cell (RBC) or activated platelet. The convective diffusion equation ...In this study, a point source mathematical model is proposed to describe the diffusion of adenosine di-phosphate (ADP) from either damaged red blood cell (RBC) or activated platelet. The convective diffusion equation is reduced to describe the suggested problem. The final differential equation is solved using Laplace transforms and ADP concentration profiles around the source are obtained. Thrombi of 5 to 20 μm<sup>3</sup> containing platelets and a range of red blood cells (RBCs) (0%, 25%, 50%, 75%, 100%) concentrations are used to apply the model. Reported ADP concentrations in the literature are used and its dynamic release from the point source is calculated. Results suggest that RBC chemical contribution to platelet aggregation in the bulk is much less than that of platelet (almost) negligible. However, the physical effect of RBCs is dominant in the bulk through augmentation of released ADP and platelets diffusivities. Moreover, the chemical contribution reported in previous studies is suggested to be as a result of interaction of RBC with the surface under the influence of shear stresses in the boundary region.展开更多
By using Lagrangian method, the flow properties of a dusty-gas point source in a supersonic free stream were studied and the particle parameters in the near-symmetry-axis region were obtained . It is demonstrated that...By using Lagrangian method, the flow properties of a dusty-gas point source in a supersonic free stream were studied and the particle parameters in the near-symmetry-axis region were obtained . It is demonstrated that fairly inertial particles travel along oscillating and intersecting trajectories between the bow and termination shock waves . In this region, formation of ' mufti- layer structure' in panicle distribution with alternating low- and high density layers is revealed. Moreover, sharp accumulation of particles occurs near the envelopes of particle trajectories .展开更多
The Fox function expression and the analytic expression for the concentration distribution of fractional anomalous diffusion caused by an instantaneous point source in n-dimensional space (n= 1, 2 or 3) are derived by...The Fox function expression and the analytic expression for the concentration distribution of fractional anomalous diffusion caused by an instantaneous point source in n-dimensional space (n= 1, 2 or 3) are derived by means of the condition of mass conservation , the time-space similarity of the solution , Mellin transform and the properties of the Fox function . And the asymptotic behaviors for the solutions are also given .展开更多
The advantages of Reichardt＇s hypothesis in dealing with single and multiple circular jets in a stagnant environment are highlighted. The stages involved in the development of the point source method, an offshoot of ...The advantages of Reichardt＇s hypothesis in dealing with single and multiple circular jets in a stagnant environment are highlighted. The stages involved in the development of the point source method, an offshoot of the new hypothesis, are presented, Previous results of experiments on multiple circular jets in a stagnant environment justify the method of superposition. As a prelude to discussion of multiple jets in a co-flowing stream, results on the excess-velocity decay, the growth of the shear layer, and the dilutions for a single jet based on Reichardt＇s hypothesis are presented. The spreading hypothesis is generalized by introducing a link factor kl to account for the co-flowing stream. The distribution of excess-momentum flux uAu is shown to be Gaussian in nature. Based on the principle of superposition, the decay of the maximum excess velocity and the dilution are predicted for odd and even numbers of jets in an array. The predictions seem to be in good agreement with observed data.展开更多
We apply a Cross-Correlation （CC） method developed previously for detecting gamma-ray point sources to the WMAP first year data by using the Point-Spread Function of WMAP and obtain a full sky CC coefficient map. We...We apply a Cross-Correlation （CC） method developed previously for detecting gamma-ray point sources to the WMAP first year data by using the Point-Spread Function of WMAP and obtain a full sky CC coefficient map. We find that the CC method is a powerful tool to examine the WMAP foreground residuals which can be further cleaned accord- ingly. Evident foreground signals are found in the WMAP foreground cleaned maps and the Tegmark cleaned map. In this process 101 point sources are detected, and 26 of them are new sources additional to the originally listed WMAP 208 sources. We estimate the flux of these new sources and verify them by another method. As a result, a revised mask file based on the WMAP first year data is produced by including these new sources.展开更多
A three-dimensional(3 D)steady-state solution of fluid saturated anisotropic finite media is presented.The eigenequation method and the pseudo-Stroh formalism are used to obtain the exact solution for homogeneous satu...A three-dimensional(3 D)steady-state solution of fluid saturated anisotropic finite media is presented.The eigenequation method and the pseudo-Stroh formalism are used to obtain the exact solution for homogeneous saturated finite media.The propagator matrix method is introduced to deal with the corresponding multilayered poroelastic media.The poroelastic solutions due to surface or internal point fluid source are obtained.The comparison of the results of the saturated isotropic media in a half space and those obtained by the finite element method is given to illustrate the accuracy of the solution in a finite domain.Numerical solutions of a sandwich poroelastic medium are presented to analyze its hydromechanical behaviors.Two ratios of the horizontal permeability to vertical permeability and different source positions are investigated.The results show that the fluid parameters and source positions have great influence on the hydromechanical behaviors of the layered media.展开更多
Carbon Capture,Utilization,and Storage(CCUS)technology has gained widespread attention in recent years as a critical strategy to combat global climate change,particularly in achieving carbon neutrality goals.The Guang...Carbon Capture,Utilization,and Storage(CCUS)technology has gained widespread attention in recent years as a critical strategy to combat global climate change,particularly in achieving carbon neutrality goals.The Guangdong-Hong Kong-Macao Greater Bay Area(GBA),as one of China's most economically active regions,serves as a key engine for economic growth while also facing considerable carbon emission challenges.This study analyzes the industrial emission volume and geographical distribution of key emitting enterprises in the GBA,summarizes their technological processes and main carbonemitting equipment,and provides scientific support for precise mitigation policies and low-carbon development.Based on data from 176 key emitting enterprises,the study reveals that Guangzhou and Dongguan host the largest number of such enterprises.Carbon emissions are primarily concentrated in the power sector,dominated by coal-and gas-fired power units,characterized by significant spatial dispersion and uneven distribution.Beyond the power sector,the paper industry has a high number of enterprises but lower emissions.Key facilities such as boilers,cogeneration systems,and production lines are predominantly located near tributaries rivers in Dongguan and Jiangmen.The building materials sector,primarily cement production,ranks as the second-largest emitter,with hightemperature kilns and grinding equipment,particularly rotary kilns and glass furnaces,as the main sources.The petrochemical and chemical sectors have fewer enterprises and lower emissions in the GBA,mainly located in suburban industrial clusters.Carbon emissions in the GBA exhibit distinct industry concentration and geographical distribution disparities.This study provides crucial data and theoretical insights for the development of targeted emission reduction strategies,optimization of source-sink matching,and the advancement of CCUS technologies in the region,particularly from the GBA to the northern South China Sea.展开更多
The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically.It is assu...The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically.It is assumed that the source is located outside the cavity at a specified distance from the borehole axis.The magnitudes of the hoop and radial stresses beside the pore pressures exerted on the interface and inside the porous medium surrounding the borehole are calculated and discussed.Biot's poroelastic modeling along with three types of boundary conditions for the cylindrical interface including the ideal fluid,empty borehole,and rigid inclusion with a hard boundary is employed for the analysis.Utilizing a proper translational addition theorem for expressing the incident spherical wave in terms of cylindrical wave expansions,the proposed boundary conditions at the interface are satisfied.Stresses are formulated by means of wave potential functions in a three-dimensional(3D)manner.The effects of the frequency and the radial distance between the source and borehole on the induced stresses are examined for the first cylindrical modes over frequency spectra.Two permeability conditions for the interface and three types of soils for the porous formation are considered throughout the analysis.To give an overall outline of the study,a numerical example is presented.The results clearly indicate that the distance is a key parameter and has considerable effects on the induced stress values.In addition,the interface permeability condition and soil characteristics play an important role in determining the dynamic response of the borehole.Finally,the obtained results are compared with the relevant analyses existing in the literature for some limit cases,and good agreement is achieved.展开更多
Point Sources and Gaussian beams are used frequently as fundamental building blocks for developing ultrasonic beam models. Both these models have different weaknesses that limit their effectiveness. Here, we will show...Point Sources and Gaussian beams are used frequently as fundamental building blocks for developing ultrasonic beam models. Both these models have different weaknesses that limit their effectiveness. Here, we will show that one can develop a Gaussian Beam Equivalent Point Source （GBEPS） model that removes those weaknesses and combines the accuracy and versatility of the point source models with much of the speed and well-behaved nature of Gaussian beam models. We will demonstrate the efficiency and versatility of this new GBEPS model in simulating the beams generated from ultrasonic phased arrays, using as few as one Gaussian beam per element of the array. A single element GBEPS model will be shown to be as accurate as a point source model even when substantial beam focusing or steering is present in the array or where the array beam is transmitted through an interface. At the same time the GBEPS model will be shown to be several orders of magnitude faster than the point source model.展开更多
The complexity of near surface intensifies the diversity of seismic wave fields, which makes study on near surface wavefields important in many aspects. The strong absorption of low velocity layer can affect the resol...The complexity of near surface intensifies the diversity of seismic wave fields, which makes study on near surface wavefields important in many aspects. The strong absorption of low velocity layer can affect the resolution of seismic data, and free boundary can cause surface wave. Considering the above problems, we focus on the Rayleigh wavefields simulation using finite-difference wave equation of higher-order staggered grids and PML boundary conditions. Free boundary, buried source and overlying low velocity layer are taken into consideration and point explosion source is adopted. Through some numerical simulation with different parameters, we quantitatively analyze relationship between wave intensity and source depth, as well as the energy variation with propagation and obtain some practical knowledge and conclusions.展开更多
Using the data taken from Tibet II High Density （HD） Array （1997 February-1999 September） and Tibet-III array （1999 November--2005 November）, our previous northern sky survey for TeV γ-ray point sources has now...Using the data taken from Tibet II High Density （HD） Array （1997 February-1999 September） and Tibet-III array （1999 November--2005 November）, our previous northern sky survey for TeV γ-ray point sources has now been updated by a factor of 2.8 improved statistics. From 0.0° to 60.0° in declination （Dec） range, no new TeV T-ray point sources with sufficiently high significance were identified while the well-known Crab Nebula and Mrk421 remain to be the brightest TeV γ-ray sources within the field of view of the Tibet air shower array. Based on the currently available data and at the 90% confidence level （C.L.）, the flux upper limits for different power law index assumption are re-derived, which are approximately improved by 1.7 times as compared with our previous reported limits.展开更多
We considered the point source identification problems for heat equations from noisy observation data taken at the minimum number of spatially fixed measurement points.We aim to identify the unknown number of sources ...We considered the point source identification problems for heat equations from noisy observation data taken at the minimum number of spatially fixed measurement points.We aim to identify the unknown number of sources and their locations along with their strengths.In our previous work,we proved that minimum measurement points needed under the noise-free setting.In this paper,we extend the proof to cover the noisy cases over a border class of source functions.We show that if the regularization parameter is chosen properly,the problem can be transformed into a poles identification problem.A reconstruction scheme is proposed on the basis of the developed theoretical results.Numerical demonstrations in 2D and 3D conclude the paper.展开更多
The electromagnetic field relations are demonstrated on impulse radiating surface and point type sources, which are characterized by first and second order singularities at rest in a Schwartz-Sobolev space setting. Th...The electromagnetic field relations are demonstrated on impulse radiating surface and point type sources, which are characterized by first and second order singularities at rest in a Schwartz-Sobolev space setting. The investigation starts with a general introduction to Schwartz-Sobolev distributions, the electromagnetic field equations and various modes of impulsive radiation. This is followed by an outline of temporal distributional relations in arbitrary media and distributional derivative operations on an arbitrary regular surface, all of which are employed in an investigation of impulse radiation mechanism on single and double layer sources. Similar steps are followed in a description of point distributions and investigation of impulse radiation mechanism on electric and magnetic point dipoles.展开更多
In this study,a seismic hazard algorithm was developed,coupled with a multi-source model.The algorithm can calculate the seismic hazard of 2D planar sources and 3D fault sources.A point source model is used to calcula...In this study,a seismic hazard algorithm was developed,coupled with a multi-source model.The algorithm can calculate the seismic hazard of 2D planar sources and 3D fault sources.A point source model is used to calculate the 2D planar potential seismic source by discretizing the potential seismic source into grid points which represent seismic sources.In contrast,a rupture surface model is used to calculate the 3D fault source so as to account for the influence of rupture scale in large earthquakes.The corresponding computational software was developed in Java and was tested on a study area 39.2°N-40.4°N and 116.6°E-118.7°E;the Tangshan and Xiadian faults were used to construct the fault source.Compared with the hazard results obtained using a point source model to calculate a 2D planar potential seismic source,the hazard results will be higher when a rupture surface model is used to calculate a 3D fault source.Moreover,a lower exceedance probability corresponds to a greater contribution rate of the fault source to the hazard and a greater seismic hazard closer to the fault.The algorithm can be used for seismic hazard analysis and can serve as a reference for the development of next-generation methods for zoning areas based on seismic ground motion.展开更多
Elastic wave on seafloor caused by low frequency noise radiated from ship is called ship seismic wave which can be used to identify ship target. In order to analyze the wave components and the propagating properties o...Elastic wave on seafloor caused by low frequency noise radiated from ship is called ship seismic wave which can be used to identify ship target. In order to analyze the wave components and the propagating properties of ship seismic wave, the numerical calculation of synthetic seismograms on seafloor aroused by a low frequency point sound source is carried out using a wave number integration technique combined with inverse Fourier transform. According to the numerical example of hard seafloor, the time series of seismic wave on seafloor are mostly composed of interface waves and normal mode waves. Each normal mode wave has a well defined low cut-off frequency, while the interface wave doesn't have. The frequency dispersion of normal mode wave is obvious when frequency is lower than 100Hz, while the interface wave is dispersive only in the infra-sound frequency range. The time series of seismic wave is dominated by the interface wave when the source frequency is less than the minimal cut-off frequency of normal mode wave.展开更多
In the present paper, the authors make a theoretical analysis on the autoploidy between the twelve Yuan （source） points and their corresponding Zangfu-organs from 1 ） historical development, 2） correlation, 3） cl...In the present paper, the authors make a theoretical analysis on the autoploidy between the twelve Yuan （source） points and their corresponding Zangfu-organs from 1 ） historical development, 2） correlation, 3） clinical application, 4） experimental research results about the relationship between Yuan points and the Zangfu-organs, and between meridians and Zangfu-organs, and 5） literature description. The twelve Yuan points have an important role in clinical diagnosis and treatment of diseases, and a close association with the Zangfu-organs.展开更多
OBJECTIVE: To investigate the effects of needling the Shu, Yuan, and Mu acupoints on serum uric acid(SUA), xanthine oxidase(XOD), and alkaline phosphatase(ALP) levels and the kidney index in a rat model of gout and hy...OBJECTIVE: To investigate the effects of needling the Shu, Yuan, and Mu acupoints on serum uric acid(SUA), xanthine oxidase(XOD), and alkaline phosphatase(ALP) levels and the kidney index in a rat model of gout and hyperuricemia.METHODS: Fifty rats were randomly divided into five groups: blank, model, Shu-acupoint, Yuan-acupoint, and Mu-acupoint groups. A rat model of hyperuricemia was developed by intragastric administration of adenine and ethambutol. This experiment last for 90 d in total. Treatment groups underwent 3 courses of acupuncture. Each course involved a total of 10 interventions(one intervention every second day) with each intervention lasting15 min. There was a break for 10 d between courses. SUA and ALP were analyzed using an automatic biochemical analyzer and XOD was analyzed using immunofluorescence.RESULTS: Compared with the blank group, SUA and XOD levels in the model group were significantly higher and the renal index significantly improved. Compared with the model group, SUA and XOD levels in the three treatment groups decreased and the renal index significantly improved.When the three treatment groups were compared,the Mu-acupoint group showed the greatest decreases in SUA and XOD levels, followed by the Yuan-acupoint group. There was no significant difference in kidney index among the three treatment groups. There was no significant difference in ALP levels among the groups.CONCLUSION: The three treatments showed significantly reduced SUA and XOD levels compared with the control groups, possibly suggesting reduced renal damage.展开更多
基金Under the auspices of Major State Basic Research Development Program of China (973 Program) (No. 2004CB418502,No. 2007CB407205)the Knowledge Innovation Programs of Chinese Academy of Sciences (No. KSCX1-YW-09-13)
文摘Individual participation of pollutants in the pollution load should be estimated even if roughly for the appropriate environmental management of a river basin.It is difficult to identify the sources and to quantify the load, especially in modeling nonpoint source.In this study a revised model was established by integrating point and nonpoint sources into one-dimensional Streeter-Phelps(S-P) model on the basis of real-time hydrologic data and surface water quality monitoring data in the Jilin Reach of the Songhua River Basin.Chemical oxygen demand(COD) and ammonia nitrogen(NH 3-N) loads were estimated.Results showed that COD loads of point source and nonpoint source were 134 958 t/yr and 86 209 t/yr, accounting for 61.02% and 38.98% of total loads, respectively.NH 3-N loads of point source and nonpoint source were 16 739 t/yr and 14 272 t/yr, accounting for 53.98% and 46.02%, respectively.Point source pollution was stronger than nonpoint source pollution in the study area at present.The water quality of upstream was better than that of downstream of the rivers and cities.It is indispensable to treat industrial wastewater and municipal sewage out of point sources, to adopt the best management practices to control diffuse pollutants from agricultural land and urban surface runoff in improving water quality of the Songhua River Basin.The revised S-P model can be successfully used to identify pollution source and quantify point source and nonpoint source loads by calibrating and validating.
基金supported by the Special Environmental Research Funds for Public Welfare (No. 200909005)the National Natural Science Foundation of China (No.20677030)the Doctor Funds of Tianjin Normal University (No. 52XB1110)
文摘Advancing the understanding of the spatial aspects of air pollution in the city regional environment is an area where improved methods can be of great benefit to exposure assessment and policy support. We created land use regression （LUR） models for SO2, NO2 and PMI0 for Tianjin, China. Traffic volumes, road networks, land use data, population density, meteorological conditions, physical conditions and satellite-derived greenness, brightness and wetness were used for predicting SOa, NO2 and PMt0 concentrations. We incorporated data on industrial point sources to improve LUR model performance. In order to consider the impact of different sources, we calculated the PSIndex, LSIndex and area of different land use types （agricultural land, industrial land, commercial land, residential land, green space and water area） within different buffer radii （1 to 20 kin）. This method makes up for the lack of consideration of source impact based on the LUR model. Remote sensing-derived variables were significantly correlated with gaseous pollutant concentrations such as SO2 and NO2. R2 values of the multiple linear regression equations for SO2, NO2 and PM10 were 0.78, 0.89 and 0.84, respectively, and the RMSE values were 0.32, 0.18 and 0.21, respectively. Model predictions at validation monitoring sites went well with predictions generally within 15% of measured values. Compared to the relationship between dependent variables and simple variables （such as traffic variables or meteorological condition variables）, the relationship between dependent variables and integrated variables was more consistent with a linear relationship. Such integration has a discernable influence on both the overall model prediction and health effects assessment on the spatial distribution of air pollution in the city region.
文摘In this study, a point source mathematical model is proposed to describe the diffusion of adenosine di-phosphate (ADP) from either damaged red blood cell (RBC) or activated platelet. The convective diffusion equation is reduced to describe the suggested problem. The final differential equation is solved using Laplace transforms and ADP concentration profiles around the source are obtained. Thrombi of 5 to 20 μm<sup>3</sup> containing platelets and a range of red blood cells (RBCs) (0%, 25%, 50%, 75%, 100%) concentrations are used to apply the model. Reported ADP concentrations in the literature are used and its dynamic release from the point source is calculated. Results suggest that RBC chemical contribution to platelet aggregation in the bulk is much less than that of platelet (almost) negligible. However, the physical effect of RBCs is dominant in the bulk through augmentation of released ADP and platelets diffusivities. Moreover, the chemical contribution reported in previous studies is suggested to be as a result of interaction of RBC with the surface under the influence of shear stresses in the boundary region.
基金Foundation items : the National Natural Science Foundation of China ( NSFC grant No.90205024) the Russian Foundation for Basic Research (RFBR grant No. 02-01-00770) RFBR-NSFC grant No.99-01-39020)
文摘By using Lagrangian method, the flow properties of a dusty-gas point source in a supersonic free stream were studied and the particle parameters in the near-symmetry-axis region were obtained . It is demonstrated that fairly inertial particles travel along oscillating and intersecting trajectories between the bow and termination shock waves . In this region, formation of ' mufti- layer structure' in panicle distribution with alternating low- and high density layers is revealed. Moreover, sharp accumulation of particles occurs near the envelopes of particle trajectories .
基金the National Natural Science Foundation of China (10272067) the Doctoral Foundation of Education Ministry of China (1999042211)
文摘The Fox function expression and the analytic expression for the concentration distribution of fractional anomalous diffusion caused by an instantaneous point source in n-dimensional space (n= 1, 2 or 3) are derived by means of the condition of mass conservation , the time-space similarity of the solution , Mellin transform and the properties of the Fox function . And the asymptotic behaviors for the solutions are also given .
文摘The advantages of Reichardt＇s hypothesis in dealing with single and multiple circular jets in a stagnant environment are highlighted. The stages involved in the development of the point source method, an offshoot of the new hypothesis, are presented, Previous results of experiments on multiple circular jets in a stagnant environment justify the method of superposition. As a prelude to discussion of multiple jets in a co-flowing stream, results on the excess-velocity decay, the growth of the shear layer, and the dilutions for a single jet based on Reichardt＇s hypothesis are presented. The spreading hypothesis is generalized by introducing a link factor kl to account for the co-flowing stream. The distribution of excess-momentum flux uAu is shown to be Gaussian in nature. Based on the principle of superposition, the decay of the maximum excess velocity and the dilution are predicted for odd and even numbers of jets in an array. The predictions seem to be in good agreement with observed data.
基金Supported by the National Natural Science Foundation of China.
文摘We apply a Cross-Correlation （CC） method developed previously for detecting gamma-ray point sources to the WMAP first year data by using the Point-Spread Function of WMAP and obtain a full sky CC coefficient map. We find that the CC method is a powerful tool to examine the WMAP foreground residuals which can be further cleaned accord- ingly. Evident foreground signals are found in the WMAP foreground cleaned maps and the Tegmark cleaned map. In this process 101 point sources are detected, and 26 of them are new sources additional to the originally listed WMAP 208 sources. We estimate the flux of these new sources and verify them by another method. As a result, a revised mask file based on the WMAP first year data is produced by including these new sources.
基金Project supported by the National Natural Science Foundation of China(No.51704015)China Scholarship Council(No.201706465064)。
文摘A three-dimensional(3 D)steady-state solution of fluid saturated anisotropic finite media is presented.The eigenequation method and the pseudo-Stroh formalism are used to obtain the exact solution for homogeneous saturated finite media.The propagator matrix method is introduced to deal with the corresponding multilayered poroelastic media.The poroelastic solutions due to surface or internal point fluid source are obtained.The comparison of the results of the saturated isotropic media in a half space and those obtained by the finite element method is given to illustrate the accuracy of the solution in a finite domain.Numerical solutions of a sandwich poroelastic medium are presented to analyze its hydromechanical behaviors.Two ratios of the horizontal permeability to vertical permeability and different source positions are investigated.The results show that the fluid parameters and source positions have great influence on the hydromechanical behaviors of the layered media.
基金supported by the National Natural Science Foundation of China(52304098,52106092,42376215,52474105)Shenzhen Science and Technology Program(JCYJ20220818095605012,JCYJ20220530113011027)+5 种基金Guangdong Basic and Applied Basic Research Foundation(2022A1515110338,2023A1515012316,2023A1515012761,2025A1515010748)Research Team Cultivation Program of Shenzhen University(2023QNT004)Shenzhen Key Laboratory of Natural Gas Hydrates(ZDSYS20200421111201738)the General Research Fund(No.12616222)Early Career Scheme(No.22611624)of Hong Kong Research Grants CouncilMajor Science and Technology Infrastructure Project of Material Genome Big–science Facilities Platform supported by the Municipal Development and Reform Commission of Shenzhen。
文摘Carbon Capture,Utilization,and Storage(CCUS)technology has gained widespread attention in recent years as a critical strategy to combat global climate change,particularly in achieving carbon neutrality goals.The Guangdong-Hong Kong-Macao Greater Bay Area(GBA),as one of China's most economically active regions,serves as a key engine for economic growth while also facing considerable carbon emission challenges.This study analyzes the industrial emission volume and geographical distribution of key emitting enterprises in the GBA,summarizes their technological processes and main carbonemitting equipment,and provides scientific support for precise mitigation policies and low-carbon development.Based on data from 176 key emitting enterprises,the study reveals that Guangzhou and Dongguan host the largest number of such enterprises.Carbon emissions are primarily concentrated in the power sector,dominated by coal-and gas-fired power units,characterized by significant spatial dispersion and uneven distribution.Beyond the power sector,the paper industry has a high number of enterprises but lower emissions.Key facilities such as boilers,cogeneration systems,and production lines are predominantly located near tributaries rivers in Dongguan and Jiangmen.The building materials sector,primarily cement production,ranks as the second-largest emitter,with hightemperature kilns and grinding equipment,particularly rotary kilns and glass furnaces,as the main sources.The petrochemical and chemical sectors have fewer enterprises and lower emissions in the GBA,mainly located in suburban industrial clusters.Carbon emissions in the GBA exhibit distinct industry concentration and geographical distribution disparities.This study provides crucial data and theoretical insights for the development of targeted emission reduction strategies,optimization of source-sink matching,and the advancement of CCUS technologies in the region,particularly from the GBA to the northern South China Sea.
文摘The effects of a harmonically exciting monopole source on an infinitely long cylindrical cavity embedded entirely within a fluid-saturated poroelastic formation of infinite extent are examined theoretically.It is assumed that the source is located outside the cavity at a specified distance from the borehole axis.The magnitudes of the hoop and radial stresses beside the pore pressures exerted on the interface and inside the porous medium surrounding the borehole are calculated and discussed.Biot's poroelastic modeling along with three types of boundary conditions for the cylindrical interface including the ideal fluid,empty borehole,and rigid inclusion with a hard boundary is employed for the analysis.Utilizing a proper translational addition theorem for expressing the incident spherical wave in terms of cylindrical wave expansions,the proposed boundary conditions at the interface are satisfied.Stresses are formulated by means of wave potential functions in a three-dimensional(3D)manner.The effects of the frequency and the radial distance between the source and borehole on the induced stresses are examined for the first cylindrical modes over frequency spectra.Two permeability conditions for the interface and three types of soils for the porous formation are considered throughout the analysis.To give an overall outline of the study,a numerical example is presented.The results clearly indicate that the distance is a key parameter and has considerable effects on the induced stress values.In addition,the interface permeability condition and soil characteristics play an important role in determining the dynamic response of the borehole.Finally,the obtained results are compared with the relevant analyses existing in the literature for some limit cases,and good agreement is achieved.
基金supported by the National Science Foundation Industry/University Cooperative Research Center program at Iowa State Universitythe Natural Sciences and Engineering Research Council of Canadaby the National Natural Science Foundation of China(NSFC)
文摘Point Sources and Gaussian beams are used frequently as fundamental building blocks for developing ultrasonic beam models. Both these models have different weaknesses that limit their effectiveness. Here, we will show that one can develop a Gaussian Beam Equivalent Point Source （GBEPS） model that removes those weaknesses and combines the accuracy and versatility of the point source models with much of the speed and well-behaved nature of Gaussian beam models. We will demonstrate the efficiency and versatility of this new GBEPS model in simulating the beams generated from ultrasonic phased arrays, using as few as one Gaussian beam per element of the array. A single element GBEPS model will be shown to be as accurate as a point source model even when substantial beam focusing or steering is present in the array or where the array beam is transmitted through an interface. At the same time the GBEPS model will be shown to be several orders of magnitude faster than the point source model.
基金support of the Major National Science and Technology Projects(No.2011ZX05006-002)the Fundamental Research Funds for the Central Universities of China(No.09CX04009A)
文摘The complexity of near surface intensifies the diversity of seismic wave fields, which makes study on near surface wavefields important in many aspects. The strong absorption of low velocity layer can affect the resolution of seismic data, and free boundary can cause surface wave. Considering the above problems, we focus on the Rayleigh wavefields simulation using finite-difference wave equation of higher-order staggered grids and PML boundary conditions. Free boundary, buried source and overlying low velocity layer are taken into consideration and point explosion source is adopted. Through some numerical simulation with different parameters, we quantitatively analyze relationship between wave intensity and source depth, as well as the energy variation with propagation and obtain some practical knowledge and conclusions.
基金Supported by Grants-in-Aid for Scientific Research on Priority Areas (712) (MEXT)Japan Society for Promotion of Science(JSPS)+1 种基金National Natural Science Foundation of China (10675134,10533020)Chinese Academy of Sciences
文摘Using the data taken from Tibet II High Density （HD） Array （1997 February-1999 September） and Tibet-III array （1999 November--2005 November）, our previous northern sky survey for TeV γ-ray point sources has now been updated by a factor of 2.8 improved statistics. From 0.0° to 60.0° in declination （Dec） range, no new TeV T-ray point sources with sufficiently high significance were identified while the well-known Crab Nebula and Mrk421 remain to be the brightest TeV γ-ray sources within the field of view of the Tibet air shower array. Based on the currently available data and at the 90% confidence level （C.L.）, the flux upper limits for different power law index assumption are re-derived, which are approximately improved by 1.7 times as compared with our previous reported limits.
文摘We considered the point source identification problems for heat equations from noisy observation data taken at the minimum number of spatially fixed measurement points.We aim to identify the unknown number of sources and their locations along with their strengths.In our previous work,we proved that minimum measurement points needed under the noise-free setting.In this paper,we extend the proof to cover the noisy cases over a border class of source functions.We show that if the regularization parameter is chosen properly,the problem can be transformed into a poles identification problem.A reconstruction scheme is proposed on the basis of the developed theoretical results.Numerical demonstrations in 2D and 3D conclude the paper.
文摘The electromagnetic field relations are demonstrated on impulse radiating surface and point type sources, which are characterized by first and second order singularities at rest in a Schwartz-Sobolev space setting. The investigation starts with a general introduction to Schwartz-Sobolev distributions, the electromagnetic field equations and various modes of impulsive radiation. This is followed by an outline of temporal distributional relations in arbitrary media and distributional derivative operations on an arbitrary regular surface, all of which are employed in an investigation of impulse radiation mechanism on single and double layer sources. Similar steps are followed in a description of point distributions and investigation of impulse radiation mechanism on electric and magnetic point dipoles.
基金supported by the National Key R&D Program of China(No.2022YFC3003502)。
文摘In this study,a seismic hazard algorithm was developed,coupled with a multi-source model.The algorithm can calculate the seismic hazard of 2D planar sources and 3D fault sources.A point source model is used to calculate the 2D planar potential seismic source by discretizing the potential seismic source into grid points which represent seismic sources.In contrast,a rupture surface model is used to calculate the 3D fault source so as to account for the influence of rupture scale in large earthquakes.The corresponding computational software was developed in Java and was tested on a study area 39.2°N-40.4°N and 116.6°E-118.7°E;the Tangshan and Xiadian faults were used to construct the fault source.Compared with the hazard results obtained using a point source model to calculate a 2D planar potential seismic source,the hazard results will be higher when a rupture surface model is used to calculate a 3D fault source.Moreover,a lower exceedance probability corresponds to a greater contribution rate of the fault source to the hazard and a greater seismic hazard closer to the fault.The algorithm can be used for seismic hazard analysis and can serve as a reference for the development of next-generation methods for zoning areas based on seismic ground motion.
基金Sponsored by National Nature Science Foundation of China ( 51179195)National Defense Foundation of China ( 513030203-02)
文摘Elastic wave on seafloor caused by low frequency noise radiated from ship is called ship seismic wave which can be used to identify ship target. In order to analyze the wave components and the propagating properties of ship seismic wave, the numerical calculation of synthetic seismograms on seafloor aroused by a low frequency point sound source is carried out using a wave number integration technique combined with inverse Fourier transform. According to the numerical example of hard seafloor, the time series of seismic wave on seafloor are mostly composed of interface waves and normal mode waves. Each normal mode wave has a well defined low cut-off frequency, while the interface wave doesn't have. The frequency dispersion of normal mode wave is obvious when frequency is lower than 100Hz, while the interface wave is dispersive only in the infra-sound frequency range. The time series of seismic wave is dominated by the interface wave when the source frequency is less than the minimal cut-off frequency of normal mode wave.
文摘In the present paper, the authors make a theoretical analysis on the autoploidy between the twelve Yuan （source） points and their corresponding Zangfu-organs from 1 ） historical development, 2） correlation, 3） clinical application, 4） experimental research results about the relationship between Yuan points and the Zangfu-organs, and between meridians and Zangfu-organs, and 5） literature description. The twelve Yuan points have an important role in clinical diagnosis and treatment of diseases, and a close association with the Zangfu-organs.
基金Supported by Central Universities Fundamental Research Funds Project(Graduate Programs)from the Beijing University of Chinese Medicine:Experiment Research on the Effects of Acupuncturing Shu,Yuan,and Mu Acupoints in a Rat Model of Gout and Hyperuricemia(No.2015-JYB-XS127)
文摘OBJECTIVE: To investigate the effects of needling the Shu, Yuan, and Mu acupoints on serum uric acid(SUA), xanthine oxidase(XOD), and alkaline phosphatase(ALP) levels and the kidney index in a rat model of gout and hyperuricemia.METHODS: Fifty rats were randomly divided into five groups: blank, model, Shu-acupoint, Yuan-acupoint, and Mu-acupoint groups. A rat model of hyperuricemia was developed by intragastric administration of adenine and ethambutol. This experiment last for 90 d in total. Treatment groups underwent 3 courses of acupuncture. Each course involved a total of 10 interventions(one intervention every second day) with each intervention lasting15 min. There was a break for 10 d between courses. SUA and ALP were analyzed using an automatic biochemical analyzer and XOD was analyzed using immunofluorescence.RESULTS: Compared with the blank group, SUA and XOD levels in the model group were significantly higher and the renal index significantly improved. Compared with the model group, SUA and XOD levels in the three treatment groups decreased and the renal index significantly improved.When the three treatment groups were compared,the Mu-acupoint group showed the greatest decreases in SUA and XOD levels, followed by the Yuan-acupoint group. There was no significant difference in kidney index among the three treatment groups. There was no significant difference in ALP levels among the groups.CONCLUSION: The three treatments showed significantly reduced SUA and XOD levels compared with the control groups, possibly suggesting reduced renal damage.
