In order to analyze the failure data from repairable systems, the homogeneous Poisson process (HPP) is usually used. In general, HPP cannot be applied to analyze the entire life cycle of a complex, re-pairable system ...In order to analyze the failure data from repairable systems, the homogeneous Poisson process (HPP) is usually used. In general, HPP cannot be applied to analyze the entire life cycle of a complex, re-pairable system because the rate of occurrence of failures (ROCOF) of the system changes over time rather than remains stable. However, from a practical point of view, it is always preferred to apply the simplest method to address problems and to obtain useful practical results. Therefore, we attempted to use the HPP model to analyze the failure data from real repairable systems. A graphic method and the Laplace test were also used in the analysis. Results of numerical applications show that the HPP model may be a useful tool for the entire life cycle of repairable systems.展开更多
Airborne LiDAR(Light Detection and Ranging)is an evolving high-tech active remote sensing technology that has the capability to acquire large-area topographic data and can quickly generate DEM(Digital Elevation Model)...Airborne LiDAR(Light Detection and Ranging)is an evolving high-tech active remote sensing technology that has the capability to acquire large-area topographic data and can quickly generate DEM(Digital Elevation Model)products.Combined with image data,this technology can further enrich and extract spatial geographic information.However,practically,due to the limited operating range of airborne LiDAR and the large area of task,it would be necessary to perform registration and stitching process on point clouds of adjacent flight strips.By eliminating grow errors,the systematic errors in the data need to be effectively reduced.Thus,this paper conducts research on point cloud registration methods in urban building areas,aiming to improve the accuracy and processing efficiency of airborne LiDAR data.Meanwhile,an improved post-ICP(Iterative Closest Point)point cloud registration method was proposed in this study to determine the accurate registration and efficient stitching of point clouds,which capable to provide a potential technical support for applicants in related field.展开更多
In this paper, we study the joint limit distributions of point processes of exceedances and partial sums of multivariate Gaussian sequences and show that the point processes and partial sums are asymptotically indepen...In this paper, we study the joint limit distributions of point processes of exceedances and partial sums of multivariate Gaussian sequences and show that the point processes and partial sums are asymptotically independent under some mild conditions. As a result, for a sequence of standardized stationary Gaussian vectors, we obtain that the point process of exceedances formed by the sequence （centered at the sample mean） converges in distribution to a Poisson process and it is asymptotically independent of the partial sums. The asymptotic joint limit distributions of order statistics and partial sums are also investigated under different conditions.展开更多
Let N, N1, N2 be simple point processes on a LCCB space (E,) such that N=N1+N2, and p() be a measurable function with 0<p()<1 on (E,). Then any two of the following statements yield another two:(Ⅰ) N is a Poiss...Let N, N1, N2 be simple point processes on a LCCB space (E,) such that N=N1+N2, and p() be a measurable function with 0<p()<1 on (E,). Then any two of the following statements yield another two:(Ⅰ) N is a Poisson process;(Ⅱ) N1 is the p( )thinning of N, N2 is the (1-p())-thinning of N;(Ⅲ) N1 and N2 are independent;(Ⅳ) N1, N2 are Poisson processes with respect to a filtration {F(A), A}, whereF(A)={N1(B), N2(B), B, BA},i.e., for each bounded set A, N1(A) and N2(A) are Poisson variables, independent of F(A ).Indeed, only the fact, (Ⅱ)+(Ⅲ)(Ⅳ)+(Ⅰ), is new.展开更多
We show that the central limit theorem for linear statistics over determinantal point processes with J-Hermitian kernels holds under fairly general conditions.In particular,we establish the Gaussian limit for linear s...We show that the central limit theorem for linear statistics over determinantal point processes with J-Hermitian kernels holds under fairly general conditions.In particular,we establish the Gaussian limit for linear statistics over determinantal point processes on the union of two copies of Rdwhen the correlation kernels are J-Hermitian translation-invariant.展开更多
In this paper, the least square estimator in the problem of multiple change points estimation is studied. Here, the moving-average processes of ALNQD sequence in the mean shifts are discussed. When the number of chang...In this paper, the least square estimator in the problem of multiple change points estimation is studied. Here, the moving-average processes of ALNQD sequence in the mean shifts are discussed. When the number of change points is known, the rate of convergence of change-points estimation is derived. The result is also true for p-mixing, φ-mixing, a-mixing, associated and negatively associated sequences under suitable conditions.展开更多
To address the current issues of inaccurate segmentation and the limited applicability of segmentation methods for building facades in point clouds, we propose a facade segmentation algorithm based on optimal dual-sca...To address the current issues of inaccurate segmentation and the limited applicability of segmentation methods for building facades in point clouds, we propose a facade segmentation algorithm based on optimal dual-scale feature descriptors. First, we select the optimal dual-scale descriptors from a range of feature descriptors. Next, we segment the facade according to the threshold value of the chosen optimal dual-scale descriptors. Finally, we use RANSAC (Random Sample Consensus) to fit the segmented surface and optimize the fitting result. Experimental results show that, compared to commonly used facade segmentation algorithms, the proposed method yields more accurate segmentation results, providing a robust data foundation for subsequent 3D model reconstruction of buildings.展开更多
The increase in user mobility and density in modern cellular networks increases the risk of overloading certain base stations in popular locations such as shopping malls or stadiums,which can result in connection loss...The increase in user mobility and density in modern cellular networks increases the risk of overloading certain base stations in popular locations such as shopping malls or stadiums,which can result in connection loss for some users.To combat this,the traffic load of base stations should be kept as balanced as possible.In this paper,we propose an efficient load balancing-aware handover algorithm for highly dynamic beyond 5G heterogeneous networks by assigning mobile users to base stations with lighter loads when a handover is performed.The proposed algorithm is evaluated in a scenario with users having different levels of mobility,such as pedestrians and vehicles,and is shown to outperform the conventional handover mechanism,as well as another algorithm from the literature.As a secondary benefit,the overall energy consumption in the network is shown to be reduced with the proposed algorithm.展开更多
A drought is when reduced rainfall leads to a water crisis,impacting daily life.Over recent decades,droughts have affected various regions,including South Sulawesi,Indonesia.This study aims to map the probability of m...A drought is when reduced rainfall leads to a water crisis,impacting daily life.Over recent decades,droughts have affected various regions,including South Sulawesi,Indonesia.This study aims to map the probability of meteo-rological drought months using the 1-month Standardized Precipitation Index(SPI)in South Sulawesi.Based on SPI,meteorological drought characteristics are inversely proportional to drought event intensity,which can be modeled using a Non-Homogeneous Poisson Process,specifically the Power Law Process.The estimation method employs Maximum Likelihood Estimation(MLE),where drought event intensities are treated as random variables over a set time interval.Future drought months are estimated using the cumulative Power Law Process function,with theβandγparameters more significant than 0.The probability of drought months is determined using the Non-Homogeneous Poisson Process,which models event occurrence over time,considering varying intensities.The results indicate that,of the 24 districts/cities in South Sulawesi,14 experienced meteorological drought based on the SPI and Power Law Process model.The estimated number of months of drought occurrence in the next 12 months is one month of drought with an occurrence probability value of 0.37 occurring in November in the Selayar,Bulukumba,Bantaeng,Jeneponto,Takalar and Gowa areas,in October in the Sinjai,Barru,Bone,Soppeng,Pinrang and Pare-pare areas,as well as in December in the Maros and Makassar areas.展开更多
The Poisson point process(PPP) has been widely used in wireless network modeling and performance analysis due to the independence between its nodes. Therefore, it may not be a suitable model for many of the exclusive ...The Poisson point process(PPP) has been widely used in wireless network modeling and performance analysis due to the independence between its nodes. Therefore, it may not be a suitable model for many of the exclusive networks between the nodes. This paper analyzes the energy efficiency(EE) and optimizes the two-tier heterogeneous cellular networks(Het Nets). Considering the mutual exclusion between macro base stations(MBSs) distribution, the deployment of MBSs is modeled by the Matérn hard-core point process(MHCPP), and the deployment of pico base stations(PBSs) is modeled by the PPP. We adopt a simple approximation method to study the signal to interference ratio(SIR) distribution in two-tier MHCPP-PPP networks and then derive the coverage probabilities, the average data rates and the energy efficiency of Het Nets. Finally, an optimization algorithm is proposed to improve the EE of Het Nets by controlling the transmit power of PBSs. The simulation results show that the EE of a system can be effectively improved by selecting the appropriate transmit power for the PBSs. In addition, two-tier MHCPP-PPP Het Nets have higher energy efficiency than two-tier PPP-PPP Het Nets.展开更多
Let {Xi}i=1^∞ be a standardized stationary Gaussian sequence with covariance function τ（n） =EX1Xn＋1, Sn =∑i=1^nXi,and X^-n=Sn/n.And let Nn be the point process formed by the exceedances of random level （x/√2 l...Let {Xi}i=1^∞ be a standardized stationary Gaussian sequence with covariance function τ（n） =EX1Xn＋1, Sn =∑i=1^nXi,and X^-n=Sn/n.And let Nn be the point process formed by the exceedances of random level （x/√2 log n＋√2 log n-log（4π log n）/2√log n） √1-τ（n） ＋ X^-n by X1,X2,…, Xn. Under some mild conditions, Nn and Sn are asymptotically independent, and Nn converges weakly to a Poisson process on （0,1].展开更多
A new concept of an equi-attractor is introduced, and defined by the minimal compact set that attracts bounded sets uniformly in the past, for a non-autonomous dynam- ical system. It is shown that the compact equi-att...A new concept of an equi-attractor is introduced, and defined by the minimal compact set that attracts bounded sets uniformly in the past, for a non-autonomous dynam- ical system. It is shown that the compact equi-attraction implies the backward compactness of a pullback attractor. Also, an eventually equi-continuous and strongly bounded process has an equi-attractor if and only if it is strongly point dissipative and strongly asymptotically compact. Those results primely strengthen the known existence result of a backward bounded pullback attractor in the literature. Finally, the theoretical criteria are applied to prove the existence of both equi-attractor and backward compact attractor for a Ginzburg-Landau equation with some varying coefficients and a backward tempered external force.展开更多
A engineering system is usually repairable, and failure process of a repairable by a failure point process. The power law model is a commonly used approach to model syst the em is often described failure point process...A engineering system is usually repairable, and failure process of a repairable by a failure point process. The power law model is a commonly used approach to model syst the em is often described failure point process. This paper introduces the concept and model for the failure process of repairable system. The method of parameter estimation is developed, and failure observations are fitted into a power-law model by using the least square method. Two applications of the pressent model are discussed according to the practical failure data of the central cooling system of a nuclear power plant. One application is determining the optimal overhaul time, and the other is evaluating the quality of maintenance. This paper provides references for the overhaul decision making and maintenance quality evaluation in reality.展开更多
As 3D acquisition technology develops and 3D sensors become increasingly affordable,large quantities of 3D point cloud data are emerging.How to effectively learn and extract the geometric features from these point clo...As 3D acquisition technology develops and 3D sensors become increasingly affordable,large quantities of 3D point cloud data are emerging.How to effectively learn and extract the geometric features from these point clouds has become an urgent problem to be solved.The point cloud geometric information is hidden in disordered,unstructured points,making point cloud analysis a very challenging problem.To address this problem,we propose a novel network framework,called Tree Graph Network(TGNet),which can sample,group,and aggregate local geometric features.Specifically,we construct a Tree Graph by explicit rules,which consists of curves extending in all directions in point cloud feature space,and then aggregate the features of the graph through a cross-attention mechanism.In this way,we incorporate more point cloud geometric structure information into the representation of local geometric features,which makes our network perform better.Our model performs well on several basic point clouds processing tasks such as classification,segmentation,and normal estimation,demonstrating the effectiveness and superiority of our network.Furthermore,we provide ablation experiments and visualizations to better understand our network.展开更多
Light detection and ranging(LiDAR)sensors play a vital role in acquiring 3D point cloud data and extracting valuable information about objects for tasks such as autonomous driving,robotics,and virtual reality(VR).Howe...Light detection and ranging(LiDAR)sensors play a vital role in acquiring 3D point cloud data and extracting valuable information about objects for tasks such as autonomous driving,robotics,and virtual reality(VR).However,the sparse and disordered nature of the 3D point cloud poses significant challenges to feature extraction.Overcoming limitations is critical for 3D point cloud processing.3D point cloud object detection is a very challenging and crucial task,in which point cloud processing and feature extraction methods play a crucial role and have a significant impact on subsequent object detection performance.In this overview of outstanding work in object detection from the 3D point cloud,we specifically focus on summarizing methods employed in 3D point cloud processing.We introduce the way point clouds are processed in classical 3D object detection algorithms,and their improvements to solve the problems existing in point cloud processing.Different voxelization methods and point cloud sampling strategies will influence the extracted features,thereby impacting the final detection performance.展开更多
Willing to work in reliability theory in a general set up, under stochastically dependence conditions, we intend to characterize a not identically spare standby redundancy operation through compensator transform under...Willing to work in reliability theory in a general set up, under stochastically dependence conditions, we intend to characterize a not identically spare standby redundancy operation through compensator transform under a complete information level, the physic approach, that is, observing its component lifetime. We intend to optimize system reliability under standby redundancy allocation of its components, particularly, under minimal standby redundancy. To get results, we will use a coherent system representation through a signature point process.展开更多
UAV-aided cellular networks,millimeter wave(mm-wave) communications and multi-antenna techniques are viewed as promising components of the solution for beyond-5G(B5G) and even 6G communications.By leveraging the power...UAV-aided cellular networks,millimeter wave(mm-wave) communications and multi-antenna techniques are viewed as promising components of the solution for beyond-5G(B5G) and even 6G communications.By leveraging the power of stochastic geometry,this paper aims at providing an effective framework for modeling and analyzing a UAV-aided heterogeneous cellular network,where the terrestrial base stations(TBSs) and the UAV base stations(UBSs) coexist,and the UBSs are provided with mm-wave and multi-antenna techniques.By modeling the TBSs as a PPP and the UBSs as a Matern hard-core point process of type Ⅱ(MPH-Ⅱ),approximated but accurate analytical results for the average rate of the typical user of both tiers are derived through an approximation method based on the mean interference-to-signal ratio(MISR) gain.The influence of some relevant parameters is discussed in detail,and some insights into the network deployment and optimization are revealed.Numerical results show that some trade-offs are worthy of being considered,such as the antenna array size,the altitude of the UAVs and the power control factor of the UBSs.展开更多
In this paper,a frictional contact problem between an electro-elastic body and an electrically conductive foundation is studied.The contact is modeled by normal compliance with finite penetration and a version of Coul...In this paper,a frictional contact problem between an electro-elastic body and an electrically conductive foundation is studied.The contact is modeled by normal compliance with finite penetration and a version of Coulomb’s law of dry friction in which the coefficient of friction depends on the slip.In addition,the effects of the electrical conductivity of the foundation are taken into account.This model leads to a coupled system of the quasi-variational inequality of the elliptic type for the displacement and the nonlinear variational equation for the electric potential.The existence of a weak solution is proved by using an abstract result for elliptic variational inequalities and a fixed point argument.Then,a finite element approximation of the problem is presented.Under some regularity conditions,an optimal order error estimate of the approximate solution is derived.Finally,a successive iteration technique is used to solve the problem numerically and a convergence result is established.展开更多
In the railway system,fasteners have the functions of damping,maintaining the track distance,and adjusting the track level.Therefore,routine maintenance and inspection of fasteners are important to ensure the safe ope...In the railway system,fasteners have the functions of damping,maintaining the track distance,and adjusting the track level.Therefore,routine maintenance and inspection of fasteners are important to ensure the safe operation of track lines.Currently,assessment methods for fastener tightness include manual observation,acoustic wave detection,and image detection.There are limitations such as low accuracy and efficiency,easy interference and misjudgment,and a lack of accurate,stable,and fast detection methods.Aiming at the small deformation characteristics and large elastic change of fasteners from full loosening to full tightening,this study proposes high-precision surface-structured light technology for fastener detection and fastener deformation feature extraction based on the center-line projection distance and a fastener tightness regression method based on neural networks.First,the method uses a 3D camera to obtain a fastener point cloud and then segments the elastic rod area based on the iterative closest point algorithm registration.Principal component analysis is used to calculate the normal vector of the segmented elastic rod surface and extract the point on the centerline of the elastic rod.The point is projected onto the upper surface of the bolt to calculate the projection distance.Subsequently,the mapping relationship between the projection distance sequence and fastener tightness is established,and the influence of each parameter on the fastener tightness prediction is analyzed.Finally,by setting up a fastener detection scene in the track experimental base,collecting data,and completing the algorithm verification,the results showed that the deviation between the fastener tightness regression value obtained after the algorithm processing and the actual measured value RMSE was 0.2196 mm,which significantly improved the effect compared with other tightness detection methods,and realized an effective fastener tightness regression.展开更多
Although small cell offloading technology can alleviate the congestion in macrocell, aggressively offloading data traffic from macrocell to small cell can also degrade the performance of small cell due to the heavy lo...Although small cell offloading technology can alleviate the congestion in macrocell, aggressively offloading data traffic from macrocell to small cell can also degrade the performance of small cell due to the heavy load. Because of collision and backoff, the degradation is significant especially in network with contention-based channel access, and finally decreases throughput of the whole network. To find an optimal fraction of traffic to be offloaded in heterogeneous network, we combine Markov chain with the Poisson point process model to analyze contention-based throughput in irregularly deployment networks. Then we derive the close-form solution of the throughput and find that it is a function of the transmit power and density of base stations.Based on this, we propose the load-aware offloading strategies via power control and base station density adjustment. The numerical results verify our analysis and show a great performance gain compared with non-load-aware offloading.展开更多
文摘In order to analyze the failure data from repairable systems, the homogeneous Poisson process (HPP) is usually used. In general, HPP cannot be applied to analyze the entire life cycle of a complex, re-pairable system because the rate of occurrence of failures (ROCOF) of the system changes over time rather than remains stable. However, from a practical point of view, it is always preferred to apply the simplest method to address problems and to obtain useful practical results. Therefore, we attempted to use the HPP model to analyze the failure data from real repairable systems. A graphic method and the Laplace test were also used in the analysis. Results of numerical applications show that the HPP model may be a useful tool for the entire life cycle of repairable systems.
基金Guangxi Key Laboratory of Spatial Information and Geomatics(21-238-21-12)Guangxi Young and Middle-aged Teachers’Research Fundamental Ability Enhancement Project(2023KY1196).
文摘Airborne LiDAR(Light Detection and Ranging)is an evolving high-tech active remote sensing technology that has the capability to acquire large-area topographic data and can quickly generate DEM(Digital Elevation Model)products.Combined with image data,this technology can further enrich and extract spatial geographic information.However,practically,due to the limited operating range of airborne LiDAR and the large area of task,it would be necessary to perform registration and stitching process on point clouds of adjacent flight strips.By eliminating grow errors,the systematic errors in the data need to be effectively reduced.Thus,this paper conducts research on point cloud registration methods in urban building areas,aiming to improve the accuracy and processing efficiency of airborne LiDAR data.Meanwhile,an improved post-ICP(Iterative Closest Point)point cloud registration method was proposed in this study to determine the accurate registration and efficient stitching of point clouds,which capable to provide a potential technical support for applicants in related field.
基金Supported by National Natural Science Foundation of China(Grant No.11171275)the Program for Excellent Talents in Chongqing Higher Education Institutions(Grant No.120060-20600204)supported by the Swiss National Science Foundation Project(Grant No.200021-134785)
文摘In this paper, we study the joint limit distributions of point processes of exceedances and partial sums of multivariate Gaussian sequences and show that the point processes and partial sums are asymptotically independent under some mild conditions. As a result, for a sequence of standardized stationary Gaussian vectors, we obtain that the point process of exceedances formed by the sequence （centered at the sample mean） converges in distribution to a Poisson process and it is asymptotically independent of the partial sums. The asymptotic joint limit distributions of order statistics and partial sums are also investigated under different conditions.
文摘Let N, N1, N2 be simple point processes on a LCCB space (E,) such that N=N1+N2, and p() be a measurable function with 0<p()<1 on (E,). Then any two of the following statements yield another two:(Ⅰ) N is a Poisson process;(Ⅱ) N1 is the p( )thinning of N, N2 is the (1-p())-thinning of N;(Ⅲ) N1 and N2 are independent;(Ⅳ) N1, N2 are Poisson processes with respect to a filtration {F(A), A}, whereF(A)={N1(B), N2(B), B, BA},i.e., for each bounded set A, N1(A) and N2(A) are Poisson variables, independent of F(A ).Indeed, only the fact, (Ⅱ)+(Ⅲ)(Ⅳ)+(Ⅰ), is new.
基金supported by National Natural Science Foundation of China (Grant Nos.Y7116335K1,11801547 and 11688101)supported by National Natural Science Foundation of China (Grant Nos.11722102 and 12026250)+1 种基金Shanghai Technology Innovation Project (Grant No.21JC1400800)Laboratory of Mathematics for Nonlinear Science,Ministry of Education of China。
文摘We show that the central limit theorem for linear statistics over determinantal point processes with J-Hermitian kernels holds under fairly general conditions.In particular,we establish the Gaussian limit for linear statistics over determinantal point processes on the union of two copies of Rdwhen the correlation kernels are J-Hermitian translation-invariant.
基金Supported by the National Natural Science Foundation of China（10471126）.
文摘In this paper, the least square estimator in the problem of multiple change points estimation is studied. Here, the moving-average processes of ALNQD sequence in the mean shifts are discussed. When the number of change points is known, the rate of convergence of change-points estimation is derived. The result is also true for p-mixing, φ-mixing, a-mixing, associated and negatively associated sequences under suitable conditions.
文摘To address the current issues of inaccurate segmentation and the limited applicability of segmentation methods for building facades in point clouds, we propose a facade segmentation algorithm based on optimal dual-scale feature descriptors. First, we select the optimal dual-scale descriptors from a range of feature descriptors. Next, we segment the facade according to the threshold value of the chosen optimal dual-scale descriptors. Finally, we use RANSAC (Random Sample Consensus) to fit the segmented surface and optimize the fitting result. Experimental results show that, compared to commonly used facade segmentation algorithms, the proposed method yields more accurate segmentation results, providing a robust data foundation for subsequent 3D model reconstruction of buildings.
基金supported in part by the Istanbul Technical University Scientific Research Projects Coordination Unit under Grant FHD-2024-45764in part by TUBITAK 1515 Frontier R&D Laboratories Support Program for Turkcell 6GEN LAB under Grant 5229902Turkcell Technology R&D Center(Law no.5746)has partially supported this study。
文摘The increase in user mobility and density in modern cellular networks increases the risk of overloading certain base stations in popular locations such as shopping malls or stadiums,which can result in connection loss for some users.To combat this,the traffic load of base stations should be kept as balanced as possible.In this paper,we propose an efficient load balancing-aware handover algorithm for highly dynamic beyond 5G heterogeneous networks by assigning mobile users to base stations with lighter loads when a handover is performed.The proposed algorithm is evaluated in a scenario with users having different levels of mobility,such as pedestrians and vehicles,and is shown to outperform the conventional handover mechanism,as well as another algorithm from the literature.As a secondary benefit,the overall energy consumption in the network is shown to be reduced with the proposed algorithm.
基金funded by Hasanuddin University,grant number 00309/UN4.22/PT.01.03/2024.
文摘A drought is when reduced rainfall leads to a water crisis,impacting daily life.Over recent decades,droughts have affected various regions,including South Sulawesi,Indonesia.This study aims to map the probability of meteo-rological drought months using the 1-month Standardized Precipitation Index(SPI)in South Sulawesi.Based on SPI,meteorological drought characteristics are inversely proportional to drought event intensity,which can be modeled using a Non-Homogeneous Poisson Process,specifically the Power Law Process.The estimation method employs Maximum Likelihood Estimation(MLE),where drought event intensities are treated as random variables over a set time interval.Future drought months are estimated using the cumulative Power Law Process function,with theβandγparameters more significant than 0.The probability of drought months is determined using the Non-Homogeneous Poisson Process,which models event occurrence over time,considering varying intensities.The results indicate that,of the 24 districts/cities in South Sulawesi,14 experienced meteorological drought based on the SPI and Power Law Process model.The estimated number of months of drought occurrence in the next 12 months is one month of drought with an occurrence probability value of 0.37 occurring in November in the Selayar,Bulukumba,Bantaeng,Jeneponto,Takalar and Gowa areas,in October in the Sinjai,Barru,Bone,Soppeng,Pinrang and Pare-pare areas,as well as in December in the Maros and Makassar areas.
基金partly supported by the National Natural Science Foundation of China(Grant No.61871241,No.61701221)the Natural Science Foundation of Jiangsu Province(No.BK20160781)+1 种基金Nantong Science and Technology Project(No.JC2018127,No.JC2019117)the Research Innovation Project for College Graduates of Jiangsu Province(No.KYLX16_0662)。
文摘The Poisson point process(PPP) has been widely used in wireless network modeling and performance analysis due to the independence between its nodes. Therefore, it may not be a suitable model for many of the exclusive networks between the nodes. This paper analyzes the energy efficiency(EE) and optimizes the two-tier heterogeneous cellular networks(Het Nets). Considering the mutual exclusion between macro base stations(MBSs) distribution, the deployment of MBSs is modeled by the Matérn hard-core point process(MHCPP), and the deployment of pico base stations(PBSs) is modeled by the PPP. We adopt a simple approximation method to study the signal to interference ratio(SIR) distribution in two-tier MHCPP-PPP networks and then derive the coverage probabilities, the average data rates and the energy efficiency of Het Nets. Finally, an optimization algorithm is proposed to improve the EE of Het Nets by controlling the transmit power of PBSs. The simulation results show that the EE of a system can be effectively improved by selecting the appropriate transmit power for the PBSs. In addition, two-tier MHCPP-PPP Het Nets have higher energy efficiency than two-tier PPP-PPP Het Nets.
基金Supported by the Program for Excellent Talents in Chongqing Higher Education Institutions (120060-20600204)
文摘Let {Xi}i=1^∞ be a standardized stationary Gaussian sequence with covariance function τ（n） =EX1Xn＋1, Sn =∑i=1^nXi,and X^-n=Sn/n.And let Nn be the point process formed by the exceedances of random level （x/√2 log n＋√2 log n-log（4π log n）/2√log n） √1-τ（n） ＋ X^-n by X1,X2,…, Xn. Under some mild conditions, Nn and Sn are asymptotically independent, and Nn converges weakly to a Poisson process on （0,1].
基金supported by the National Natural Science Foundation of China(11571283)supported by Natural Science Foundation of Guizhou Province
文摘A new concept of an equi-attractor is introduced, and defined by the minimal compact set that attracts bounded sets uniformly in the past, for a non-autonomous dynam- ical system. It is shown that the compact equi-attraction implies the backward compactness of a pullback attractor. Also, an eventually equi-continuous and strongly bounded process has an equi-attractor if and only if it is strongly point dissipative and strongly asymptotically compact. Those results primely strengthen the known existence result of a backward bounded pullback attractor in the literature. Finally, the theoretical criteria are applied to prove the existence of both equi-attractor and backward compact attractor for a Ginzburg-Landau equation with some varying coefficients and a backward tempered external force.
基金supported by the National Natural Science Foundation of China(71771029)
文摘A engineering system is usually repairable, and failure process of a repairable by a failure point process. The power law model is a commonly used approach to model syst the em is often described failure point process. This paper introduces the concept and model for the failure process of repairable system. The method of parameter estimation is developed, and failure observations are fitted into a power-law model by using the least square method. Two applications of the pressent model are discussed according to the practical failure data of the central cooling system of a nuclear power plant. One application is determining the optimal overhaul time, and the other is evaluating the quality of maintenance. This paper provides references for the overhaul decision making and maintenance quality evaluation in reality.
基金supported by the National Natural Science Foundation of China (Grant Nos.91948203,52075532).
文摘As 3D acquisition technology develops and 3D sensors become increasingly affordable,large quantities of 3D point cloud data are emerging.How to effectively learn and extract the geometric features from these point clouds has become an urgent problem to be solved.The point cloud geometric information is hidden in disordered,unstructured points,making point cloud analysis a very challenging problem.To address this problem,we propose a novel network framework,called Tree Graph Network(TGNet),which can sample,group,and aggregate local geometric features.Specifically,we construct a Tree Graph by explicit rules,which consists of curves extending in all directions in point cloud feature space,and then aggregate the features of the graph through a cross-attention mechanism.In this way,we incorporate more point cloud geometric structure information into the representation of local geometric features,which makes our network perform better.Our model performs well on several basic point clouds processing tasks such as classification,segmentation,and normal estimation,demonstrating the effectiveness and superiority of our network.Furthermore,we provide ablation experiments and visualizations to better understand our network.
文摘Light detection and ranging(LiDAR)sensors play a vital role in acquiring 3D point cloud data and extracting valuable information about objects for tasks such as autonomous driving,robotics,and virtual reality(VR).However,the sparse and disordered nature of the 3D point cloud poses significant challenges to feature extraction.Overcoming limitations is critical for 3D point cloud processing.3D point cloud object detection is a very challenging and crucial task,in which point cloud processing and feature extraction methods play a crucial role and have a significant impact on subsequent object detection performance.In this overview of outstanding work in object detection from the 3D point cloud,we specifically focus on summarizing methods employed in 3D point cloud processing.We introduce the way point clouds are processed in classical 3D object detection algorithms,and their improvements to solve the problems existing in point cloud processing.Different voxelization methods and point cloud sampling strategies will influence the extracted features,thereby impacting the final detection performance.
文摘Willing to work in reliability theory in a general set up, under stochastically dependence conditions, we intend to characterize a not identically spare standby redundancy operation through compensator transform under a complete information level, the physic approach, that is, observing its component lifetime. We intend to optimize system reliability under standby redundancy allocation of its components, particularly, under minimal standby redundancy. To get results, we will use a coherent system representation through a signature point process.
基金supported by National Natural Science Foundation of China (No.62001135)the Joint funds for Regional Innovation and Development of the National Natural Science Foundation of China(No.U21A20449)the Beijing Natural Science Foundation Haidian Original Innovation Joint Fund (No.L232002)
文摘UAV-aided cellular networks,millimeter wave(mm-wave) communications and multi-antenna techniques are viewed as promising components of the solution for beyond-5G(B5G) and even 6G communications.By leveraging the power of stochastic geometry,this paper aims at providing an effective framework for modeling and analyzing a UAV-aided heterogeneous cellular network,where the terrestrial base stations(TBSs) and the UAV base stations(UBSs) coexist,and the UBSs are provided with mm-wave and multi-antenna techniques.By modeling the TBSs as a PPP and the UBSs as a Matern hard-core point process of type Ⅱ(MPH-Ⅱ),approximated but accurate analytical results for the average rate of the typical user of both tiers are derived through an approximation method based on the mean interference-to-signal ratio(MISR) gain.The influence of some relevant parameters is discussed in detail,and some insights into the network deployment and optimization are revealed.Numerical results show that some trade-offs are worthy of being considered,such as the antenna array size,the altitude of the UAVs and the power control factor of the UBSs.
文摘In this paper,a frictional contact problem between an electro-elastic body and an electrically conductive foundation is studied.The contact is modeled by normal compliance with finite penetration and a version of Coulomb’s law of dry friction in which the coefficient of friction depends on the slip.In addition,the effects of the electrical conductivity of the foundation are taken into account.This model leads to a coupled system of the quasi-variational inequality of the elliptic type for the displacement and the nonlinear variational equation for the electric potential.The existence of a weak solution is proved by using an abstract result for elliptic variational inequalities and a fixed point argument.Then,a finite element approximation of the problem is presented.Under some regularity conditions,an optimal order error estimate of the approximate solution is derived.Finally,a successive iteration technique is used to solve the problem numerically and a convergence result is established.
基金Supported by Fundamental Research Funds for the Central Universities of China(Grant No.2023JBMC014).
文摘In the railway system,fasteners have the functions of damping,maintaining the track distance,and adjusting the track level.Therefore,routine maintenance and inspection of fasteners are important to ensure the safe operation of track lines.Currently,assessment methods for fastener tightness include manual observation,acoustic wave detection,and image detection.There are limitations such as low accuracy and efficiency,easy interference and misjudgment,and a lack of accurate,stable,and fast detection methods.Aiming at the small deformation characteristics and large elastic change of fasteners from full loosening to full tightening,this study proposes high-precision surface-structured light technology for fastener detection and fastener deformation feature extraction based on the center-line projection distance and a fastener tightness regression method based on neural networks.First,the method uses a 3D camera to obtain a fastener point cloud and then segments the elastic rod area based on the iterative closest point algorithm registration.Principal component analysis is used to calculate the normal vector of the segmented elastic rod surface and extract the point on the centerline of the elastic rod.The point is projected onto the upper surface of the bolt to calculate the projection distance.Subsequently,the mapping relationship between the projection distance sequence and fastener tightness is established,and the influence of each parameter on the fastener tightness prediction is analyzed.Finally,by setting up a fastener detection scene in the track experimental base,collecting data,and completing the algorithm verification,the results showed that the deviation between the fastener tightness regression value obtained after the algorithm processing and the actual measured value RMSE was 0.2196 mm,which significantly improved the effect compared with other tightness detection methods,and realized an effective fastener tightness regression.
基金supported by the National High-Tech R&D Program (863 Program) under grant No. 2015AA01A705Beijing Municipal Science and Technology Commission research fund project under grant No. D151100000115002+1 种基金China Scholarship Council under grant No. 201406470038BUPT youth scientific research innovation program under grant No. 500401238
文摘Although small cell offloading technology can alleviate the congestion in macrocell, aggressively offloading data traffic from macrocell to small cell can also degrade the performance of small cell due to the heavy load. Because of collision and backoff, the degradation is significant especially in network with contention-based channel access, and finally decreases throughput of the whole network. To find an optimal fraction of traffic to be offloaded in heterogeneous network, we combine Markov chain with the Poisson point process model to analyze contention-based throughput in irregularly deployment networks. Then we derive the close-form solution of the throughput and find that it is a function of the transmit power and density of base stations.Based on this, we propose the load-aware offloading strategies via power control and base station density adjustment. The numerical results verify our analysis and show a great performance gain compared with non-load-aware offloading.
