As bifunctional oxygen evolution/reduction electrocatalysts,transition-metal-based single-atom-doped nitrogen-carbon(NC)matrices are promising successors of the corresponding noblemetal-based catalysts,offering the ad...As bifunctional oxygen evolution/reduction electrocatalysts,transition-metal-based single-atom-doped nitrogen-carbon(NC)matrices are promising successors of the corresponding noblemetal-based catalysts,offering the advantages of ultrahigh atom utilization effciency and surface active energy.However,the fabrication of such matrices(e.g.,well-dispersed single-atom-doped M-N4/NCs)often requires numerous steps and tedious processes.Herein,ultrasonic plasma engineering allows direct carbonization in a precursor solution containing metal phthalocyanine and aniline.When combining with the dispersion effect of ultrasonic waves,we successfully fabricated uniform single-atom M-N4(M=Fe,Co)carbon catalysts with a production rate as high as 10 mg min-1.The Co-N4/NC presented a bifunctional potential drop ofΔE=0.79 V,outperforming the benchmark Pt/C-Ru/C catalyst(ΔE=0.88 V)at the same catalyst loading.Theoretical calculations revealed that Co-N4 was the major active site with superior O2 adsorption-desorption mechanisms.In a practical Zn-air battery test,the air electrode coated with Co-N4/NC exhibited a specific capacity(762.8 mAh g(-1))and power density(101.62 mW cm^(-2)),exceeding those of Pt/C-Ru/C(700.8 mAh g^(-1) and 89.16 mW cm^(-2),respectively)at the same catalyst loading.Moreover,for Co-N4/NC,the potential difference increased from 1.16 to 1.47 V after 100 charge-discharge cycles.The proposed innovative and scalable strategy was concluded to be well suited for the fabrication of single-atom-doped carbons as promising bifunctional oxygen evolution/reduction electrocatalysts for metal-air batteries.展开更多
Two-dimensional transition metal dichalcogenides(TMDs)have shown great potential for application in the next generation of electronics and optoelectronics due to their atomically thin thickness,tunable band gap,and st...Two-dimensional transition metal dichalcogenides(TMDs)have shown great potential for application in the next generation of electronics and optoelectronics due to their atomically thin thickness,tunable band gap,and strong light-matter interaction.However,their practical application is still limited by challenges such as the constraints of high-temperature synthesis processes,compatibility issues of p-type/n-type doping strategies,and insufficient nanoscale patterning accuracy.Plasma treatment has become a key technology to break through these bottlenecks with its unique advantages such as low-temperature operation capability,generation of highly active reactive species and precise controllability of multiple parameters.This review comprehensively reviews the latest progress in plasma engineering of TMDs(MoS_(2),WS_(2),WSe_(2),etc.)based on a systematic“fundamental process-property modulation-device innovation”framework.The key plasma technologies are highlighted:plasma-enhanced chemical vapor deposition(PECVD)for low-temperature growth,bidirectional doping achieved through active species regulation,atomic layer precision etching,and defect engineering.The regulation mechanism of plasma on the intrinsic properties of materials is systematically analyzed,including electronic structure modification,optical property optimization(such as photoluminescence enhancement)and structural feature evolution.It then reveals how plasma technology promotes device innovation:achieving customizable structures(p-n junctions,sub-10 nanometer channels),optimizing interface properties(reducing contact resistance,integrating high-k dielectrics),and significantly improving the performance of gas sensors,photodetectors and neuromorphic computing systems.Finally,this article looks forward to future research directions,emphasizing that plasma technology is a versatile and indispensable platform for promoting TMDs towards practical applications.展开更多
Improved performance of plasma in raw engine exhaust treatment is reported. A new type of reactor referred to as of cross-flow dielectric barrier discharge （DBD） was used, in which the gas flow is perpendicular to t...Improved performance of plasma in raw engine exhaust treatment is reported. A new type of reactor referred to as of cross-flow dielectric barrier discharge （DBD） was used, in which the gas flow is perpendicular to the corona electrode. In raw exhaust environment, the cross-flow （radial-flow） reactor exhibits a superior performance with regard to NOx removal when compared to that with axial flow of gas. Experiments were conducted at different flow rates ranging from 2 L/min to 25 L/min. The plasma assisted barrier discharge reactor has shown encouraging results in NOx removal at high flow rates.展开更多
Presently, there is a high paucity of bone grafts in the United States and worldwide. Regenerating bone is of prime concern due to the current demand of bone grafts and the increasing number of diseases causing bone l...Presently, there is a high paucity of bone grafts in the United States and worldwide. Regenerating bone is of prime concern due to the current demand of bone grafts and the increasing number of diseases causing bone loss. Autogenous bone is the present gold standard of bone regeneration. However, disadvantages like donor site morbidity and its decreased availability limit its use. Even allografts and synthetic grafting materials have their own limitations. As certain specific stem cells can be directed to differentiate into an osteoblastic lineage in the presence of growth factors(GFs), it makes stem cells the ideal agents for bone regeneration.Furthermore, platelet-rich plasma(PRP), which can be easily isolated from whole blood, is often used for bone regeneration, wound healing and bone defect repair. When stem cells are combined with PRP in the presence of GFs, they are able to promote osteogenesis. This review provides in-depth knowledge regarding the use of stem cells and PRP in vitro, in vivo and their application in clinical studies in the future.展开更多
In this paper,the characteristics of detonation combustion ignited by AC-driven non-thermal plasma and spark plug in air/acetylene mixture have been compared in a doubletube experiment system.The two tubes had the sam...In this paper,the characteristics of detonation combustion ignited by AC-driven non-thermal plasma and spark plug in air/acetylene mixture have been compared in a doubletube experiment system.The two tubes had the same structure,and their closed ends were installed with a plasma generator and a spark plug,respectively.The propagation characteristics of the flame were measured by pressure sensors and ion probes.The experiment results show that,compared with a spark plug,the non-thermal plasma obviously broadened the range of equivalence ratio when the detonation wave could develop successfully,it also heightened the pressure value of detonation wave.Meanwhile,the detonation wave development time and the entire flame propagation time were reduced by half.All of these advantages benefited from the larger ignition volume when a non-thermal plasma was applied.展开更多
At the time of implanting bone-related implants into human body,a variety of biological responses to the material surface occur with respect to surface chemistry and physical state.The commonly used biomaterials(e.g.t...At the time of implanting bone-related implants into human body,a variety of biological responses to the material surface occur with respect to surface chemistry and physical state.The commonly used biomaterials(e.g.titanium and its alloy,Co–Cr alloy,stainless steel,polyetheretherketone,ultra-high molecular weight polyethylene and various calcium phosphates)have many drawbacks such as lack of biocompatibility and improper mechanical properties.As surface modification is very promising technology to overcome such problems,a variety of surface modification techniques have been being investigated.This review paper covers recent advances in surface modification techniques of bone-related materials including physicochemical coating,radiation grafting,plasma surface engineering,ion beam processing and surface patterning techniques.The contents are organized with different types of techniques to applicable materials,and typical examples are also described.展开更多
基金supported by Global Frontier Program through the Global Frontier Hybrid Interface materials(GFHIM)of the National Research Foundation of Korea(NRF)funded by the ministry of science,ICT and Future Planning(2013M3A6B1078874)co-supported by Busan Innovation Institute of Industry,Science&Technology Planning(BISTEP)+1 种基金the financial support of Federal Ministry of Education and Research(BMBF)under the“Make Our Planet Great Again-German Research Initiative”(MOPGAGRI),57429784implemented by the German Academic Exchange Service Deutscher Akademischer Austauschdienst(DAAD)。
文摘As bifunctional oxygen evolution/reduction electrocatalysts,transition-metal-based single-atom-doped nitrogen-carbon(NC)matrices are promising successors of the corresponding noblemetal-based catalysts,offering the advantages of ultrahigh atom utilization effciency and surface active energy.However,the fabrication of such matrices(e.g.,well-dispersed single-atom-doped M-N4/NCs)often requires numerous steps and tedious processes.Herein,ultrasonic plasma engineering allows direct carbonization in a precursor solution containing metal phthalocyanine and aniline.When combining with the dispersion effect of ultrasonic waves,we successfully fabricated uniform single-atom M-N4(M=Fe,Co)carbon catalysts with a production rate as high as 10 mg min-1.The Co-N4/NC presented a bifunctional potential drop ofΔE=0.79 V,outperforming the benchmark Pt/C-Ru/C catalyst(ΔE=0.88 V)at the same catalyst loading.Theoretical calculations revealed that Co-N4 was the major active site with superior O2 adsorption-desorption mechanisms.In a practical Zn-air battery test,the air electrode coated with Co-N4/NC exhibited a specific capacity(762.8 mAh g(-1))and power density(101.62 mW cm^(-2)),exceeding those of Pt/C-Ru/C(700.8 mAh g^(-1) and 89.16 mW cm^(-2),respectively)at the same catalyst loading.Moreover,for Co-N4/NC,the potential difference increased from 1.16 to 1.47 V after 100 charge-discharge cycles.The proposed innovative and scalable strategy was concluded to be well suited for the fabrication of single-atom-doped carbons as promising bifunctional oxygen evolution/reduction electrocatalysts for metal-air batteries.
基金supported by the National Science Foundation of China(Nos.62304151,62204170,and 62474124)the Natural Science Foundation of Tianjin(No.24JCQNJC00520)+3 种基金the China Postdoctoral Science Foundation(No.2023M742585)the Open Project of State Key Laboratory of Transducer Technology(No.SKT2208)the open research of Songshan Lake Materials Laboratory(No.2023SLABFK07)the State Key Laboratory of Fluid Power and Mechatronic Systems(No.GZKF-202327).
文摘Two-dimensional transition metal dichalcogenides(TMDs)have shown great potential for application in the next generation of electronics and optoelectronics due to their atomically thin thickness,tunable band gap,and strong light-matter interaction.However,their practical application is still limited by challenges such as the constraints of high-temperature synthesis processes,compatibility issues of p-type/n-type doping strategies,and insufficient nanoscale patterning accuracy.Plasma treatment has become a key technology to break through these bottlenecks with its unique advantages such as low-temperature operation capability,generation of highly active reactive species and precise controllability of multiple parameters.This review comprehensively reviews the latest progress in plasma engineering of TMDs(MoS_(2),WS_(2),WSe_(2),etc.)based on a systematic“fundamental process-property modulation-device innovation”framework.The key plasma technologies are highlighted:plasma-enhanced chemical vapor deposition(PECVD)for low-temperature growth,bidirectional doping achieved through active species regulation,atomic layer precision etching,and defect engineering.The regulation mechanism of plasma on the intrinsic properties of materials is systematically analyzed,including electronic structure modification,optical property optimization(such as photoluminescence enhancement)and structural feature evolution.It then reveals how plasma technology promotes device innovation:achieving customizable structures(p-n junctions,sub-10 nanometer channels),optimizing interface properties(reducing contact resistance,integrating high-k dielectrics),and significantly improving the performance of gas sensors,photodetectors and neuromorphic computing systems.Finally,this article looks forward to future research directions,emphasizing that plasma technology is a versatile and indispensable platform for promoting TMDs towards practical applications.
文摘Improved performance of plasma in raw engine exhaust treatment is reported. A new type of reactor referred to as of cross-flow dielectric barrier discharge （DBD） was used, in which the gas flow is perpendicular to the corona electrode. In raw exhaust environment, the cross-flow （radial-flow） reactor exhibits a superior performance with regard to NOx removal when compared to that with axial flow of gas. Experiments were conducted at different flow rates ranging from 2 L/min to 25 L/min. The plasma assisted barrier discharge reactor has shown encouraging results in NOx removal at high flow rates.
基金supported by the National Institute of Arthritis and Musculoskeletal and Skin Diseases,and National Institute of Dental and Craniofacial Research under Award Numbers AR061052,AR066101 and DE023105 to S.Y
文摘Presently, there is a high paucity of bone grafts in the United States and worldwide. Regenerating bone is of prime concern due to the current demand of bone grafts and the increasing number of diseases causing bone loss. Autogenous bone is the present gold standard of bone regeneration. However, disadvantages like donor site morbidity and its decreased availability limit its use. Even allografts and synthetic grafting materials have their own limitations. As certain specific stem cells can be directed to differentiate into an osteoblastic lineage in the presence of growth factors(GFs), it makes stem cells the ideal agents for bone regeneration.Furthermore, platelet-rich plasma(PRP), which can be easily isolated from whole blood, is often used for bone regeneration, wound healing and bone defect repair. When stem cells are combined with PRP in the presence of GFs, they are able to promote osteogenesis. This review provides in-depth knowledge regarding the use of stem cells and PRP in vitro, in vivo and their application in clinical studies in the future.
基金supported by National Natural Science Foundation of China(No.51176001)
文摘In this paper,the characteristics of detonation combustion ignited by AC-driven non-thermal plasma and spark plug in air/acetylene mixture have been compared in a doubletube experiment system.The two tubes had the same structure,and their closed ends were installed with a plasma generator and a spark plug,respectively.The propagation characteristics of the flame were measured by pressure sensors and ion probes.The experiment results show that,compared with a spark plug,the non-thermal plasma obviously broadened the range of equivalence ratio when the detonation wave could develop successfully,it also heightened the pressure value of detonation wave.Meanwhile,the detonation wave development time and the entire flame propagation time were reduced by half.All of these advantages benefited from the larger ignition volume when a non-thermal plasma was applied.
基金This work was partly supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education,Korea(2012R1A1A2040717)the National Basic Research Program of China funded by the Ministry of Science and Technology(MOST)of China(2011CB606205)+1 种基金the National Science and Technology Supporting Program of China funded by the MOST of China(2012BAI17B02)the National Natural Science Fund funded by the National Natural Science Foundation of China(21371106).
文摘At the time of implanting bone-related implants into human body,a variety of biological responses to the material surface occur with respect to surface chemistry and physical state.The commonly used biomaterials(e.g.titanium and its alloy,Co–Cr alloy,stainless steel,polyetheretherketone,ultra-high molecular weight polyethylene and various calcium phosphates)have many drawbacks such as lack of biocompatibility and improper mechanical properties.As surface modification is very promising technology to overcome such problems,a variety of surface modification techniques have been being investigated.This review paper covers recent advances in surface modification techniques of bone-related materials including physicochemical coating,radiation grafting,plasma surface engineering,ion beam processing and surface patterning techniques.The contents are organized with different types of techniques to applicable materials,and typical examples are also described.
