We present a theoretical analysis of corrugated long-period gratings in planar waveguides. In particular, we calculate the transmission spectra for both the TE and TM polarizations and highlight the polarization-indep...We present a theoretical analysis of corrugated long-period gratings in planar waveguides. In particular, we calculate the transmission spectra for both the TE and TM polarizations and highlight the polarization-independence conditions.展开更多
Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractive index profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnde...Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractive index profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnder interferometer and applying fringe analysis methods.展开更多
In this paper, we consider the inverse scattering problem of reconstructing a bounded obstacle in a three-dimensional planar waveguide from the scattered near-field data measured on a finite cylindrical surface contai...In this paper, we consider the inverse scattering problem of reconstructing a bounded obstacle in a three-dimensional planar waveguide from the scattered near-field data measured on a finite cylindrical surface containing the obstacle and corresponding to infinitely many incident point sources also placed on the measurement surface. The obstacle is allowed to be an impenetrable scatterer or a penetrable scatterer. We establish the validity of the factorization method with the nearfield data to characterize the obstacle in the planar waveguide by constructing an outgoing-to-incoming operator which is an integral operator defined on the measurement surface with the kernel given in terms of an infinite series.展开更多
Diffractive optical neural networks(DONNs)have exhibited the advantages of parallelization,high speed,and low consumption.However,the existing DONNs based on free-space diffractive optical elements are bulky and unste...Diffractive optical neural networks(DONNs)have exhibited the advantages of parallelization,high speed,and low consumption.However,the existing DONNs based on free-space diffractive optical elements are bulky and unsteady.In this study,we propose a planar-waveguide integrated diffractive neural network chip architecture.The three diffractive layers are engraved on the same side of a quartz wafer.The three-layer chip is designed with 32-mm3 processing space and enables a computing speed of 3.1×109 Tera operations per second.The results show that the proposed chip achieves 73.4%experimental accuracy for the Modified National Institute of Standards and Technology database while showing the system’s robustness in a cycle test.The consistency of experiments is 88.6%,and the arithmetic mean standard deviation of the results is~4.7%.The proposed chip architecture can potentially revolutionize high-resolution optical processing tasks with high robustness.展开更多
We study a generalized higher-order nonlinear Schr¨odinger equation in an optical fiber or a planar waveguide.We obtain the Lax pair and N-fold Darboux transformation(DT)with N being a positive integer.Based on L...We study a generalized higher-order nonlinear Schr¨odinger equation in an optical fiber or a planar waveguide.We obtain the Lax pair and N-fold Darboux transformation(DT)with N being a positive integer.Based on Lax pair obtained by us,we derive the infinitely-many conservation laws.We give the bright one-,two-,and N-soliton solutions,and the first-,second-,and Nth-order breather solutions based on the N-fold DT.We conclude that the velocities of the bright solitons are influenced by the distributed gain function,g(z),and variable coefficients in equation,h_(1)(z),p_(1)(z),r_(1)(z),and s_(1)(z)via the asymptotic analysis,where z represents the propagation variable or spatial coordinate.We also graphically observe that:the velocities of the first-and second-order breathers will be affected by h_(1)(z),p_(1)(z),r_(1)(z),and s_(1)(z),and the background wave depends on g(z).展开更多
TiO2/ ormosil planar waveguide was prepared by sol-gel method at low thermal treatment temperature （ 〈 200 ℃）. Scanning electron microscope, FT-IR spectrometer, spectrophotometer, atomic force microscopy, thermal ...TiO2/ ormosil planar waveguide was prepared by sol-gel method at low thermal treatment temperature （ 〈 200 ℃）. Scanning electron microscope, FT-IR spectrometer, spectrophotometer, atomic force microscopy, thermal analyzer, and dark m-line spectroscopy were used with the method of scattering-detection to investigate optical and structural properties. High optical quality waveguide film was obtained. The propagation loss of film was 0.569 dB/cm at a wavelength of 632.8 nm.展开更多
A novel scheme for high-efficiency terahertz(THz)wave generation based on optimized cascaded difference frequency generation(OCDFG)with planar waveguide is presented.The phase mismatches of each-order cascaded differe...A novel scheme for high-efficiency terahertz(THz)wave generation based on optimized cascaded difference frequency generation(OCDFG)with planar waveguide is presented.The phase mismatches of each-order cascaded difference frequency generation(CDFG)are modulated by changing the thickness of the waveguide,resulting in a decrement of phase mismatches in cascaded Stokes processes and an increment of phase mismatches in cascaded anti-Stokes processes simultaneously.The modulated phase mismatches enhance the cascaded Stokes processes and suppress the cascaded anti-Stokes processes simultaneously,yielding energy conversion efficiencies over 25%from optical wave to THz wave at 100 K.展开更多
Based on Rayleigh-Sommerfeld scalar diffraction formula, analyzed is the diffraction field distribution of the restricted output end surface of multiple quantum wells planar waveguide by slit. Obtained is its analytic...Based on Rayleigh-Sommerfeld scalar diffraction formula, analyzed is the diffraction field distribution of the restricted output end surface of multiple quantum wells planar waveguide by slit. Obtained is its analytical expression of field distribution, which permits accurate and effective study on the characteristic of diffraction field from the restricted output end surface of the waveguide by slit. Then, the variation curve of the beam propagation factor M2 versus the slit width is computed by the second moment method. It is useful for understanding the restricted diffraction properties of the multiple quantum wells planar waveguide. When the slit half width is bigger than the core layer's half width, the beam propagation factor M2 value tends to a constant 1.108. Therefore, the corresponding field amplitude distribution is approximated by Gaussian function, and the far field divergence half angle(θ0,G=0.091 8) is calculated by matching efficiency method.展开更多
Multilayer cladded slab waveguides have been solved by using asymptotic theory once or twice. Based on the solution of a three layer slab waveguide, the wave number of guided modes has been expanded in series of one o...Multilayer cladded slab waveguides have been solved by using asymptotic theory once or twice. Based on the solution of a three layer slab waveguide, the wave number of guided modes has been expanded in series of one or two small parameters. One side cladded slab, two side cladded slab and two parallel cladded slab waveguide system are demonstrated to show how to use this essentially analytic method. Numerical examples have also been given and compared with exact solutions, eved the first or second order solutions are highly accurate.展开更多
The deposition of silicon dioxide by plasma enhanced chemical vapor deposition from tetraethylorthosilicate (TEOS) and H_2O has been studied.Silicon oxide with refractive index of 1453 has been obtained.Tests on the 5...The deposition of silicon dioxide by plasma enhanced chemical vapor deposition from tetraethylorthosilicate (TEOS) and H_2O has been studied.Silicon oxide with refractive index of 1453 has been obtained.Tests on the 51mm wafers show that both thickness uniformity of ±15% and constant refractive index of 1453 can be achieved.By raising the deposition temperature,the qualities have been improved,while the deposition rate decreased.A SiO_2 thick film deposition technique has been developed combining TEOS-PECVD technique with high temperature annealing.展开更多
A novel design of 100GHz-spaced 16channel arrayed-waveguide grating (AWG) based on silica-on-silicon chip is reported.AWG is achieved by adding a Y-branch to the AWG and arranging the input/output channel in a neat ro...A novel design of 100GHz-spaced 16channel arrayed-waveguide grating (AWG) based on silica-on-silicon chip is reported.AWG is achieved by adding a Y-branch to the AWG and arranging the input/output channel in a neat row,so the whole configuration can be aligned and packaged using only one fiber-array.This configuration can decrease the device’s size,enlarge the minimum radius of curvature,save time on polishing and alignment,and reduce the chip’s fabrication cost.展开更多
Based on attenuated total reflection （ATR） and thermo-optic effect, the polymeric thin film planar optical waveguide is used as the temperature sensor, and the factors influencing the sensitivity of the temperature ...Based on attenuated total reflection （ATR） and thermo-optic effect, the polymeric thin film planar optical waveguide is used as the temperature sensor, and the factors influencing the sensitivity of the temperature sensor are comprehensively analyzed. Combined with theoretical analysis and experimental investigation, the sensitivity of the temperature sensor is related to the thicknesses of the upper cladding layer, the waveguide layer, the optical loss of the polymer material and the guided wave modes. The results show that the slope value about reflectivity and temperature, which stands for the sensitivity of the polymer thin film temperature sensor, is associated with the waveguide film thickness and the guided wave modes, and the slope value is the highest in the zero reflectance of a certain transverse electric （TE） mode. To improve the sensitivity of the temperature sensor, the sensor＇s working incident light exterior angle α should be chosen under a certain TE mode with the reflectivity to be zero. This temperature sensor is characterized by high sensitivity and simple structure and it is easily fabricated.展开更多
This paper presents an optical sensor technique used in the damage evaluation which is formed by structurally integrated fiber optic reticulate sensors embedded in the composite materials. The fibers are processed by ...This paper presents an optical sensor technique used in the damage evaluation which is formed by structurally integrated fiber optic reticulate sensors embedded in the composite materials. The fibers are processed by chemical method and their outsides are peeled to form particles of irregular distribution and they differ in size, so the slight disturbance range of stochastic wall are formed in fibers. According to the characteristics of power loss of waveguide mode caused by slight disturbance of stochastic wall and radiative mode transmission, the range of slight disturbance of stochastic wall may be served as the sensitive range of the sensor. On the basis of theory of slight disturbance of stochastic wall of planar optical waveguide, the relation between the corrosion time and the opposite power loss by experiments is investigated. In this paper, the measurement results of object of SIFORS are also presented. The results show that the optical sensor technique may be used in the damage evaluation of an aircraft.展开更多
We propose a new reverse time migration method for reconstructing extended obstacles in the planar waveguide using acoustic waves at a fixed frequency. We prove the resolution of the reconstruction method in terms of ...We propose a new reverse time migration method for reconstructing extended obstacles in the planar waveguide using acoustic waves at a fixed frequency. We prove the resolution of the reconstruction method in terms of the aperture and the thickness of the waveguide. The resolution analysis implies that the imaginary part of the cross-correlation imaging function is always positive and thus may have better stability properties.Numerical experiments are included to illustrate the powerful imaging quality and to confirm our resolution results.展开更多
The analytic surface plasmon polaritons （SPPs） dispersion relation is studied in a system consisting of a thin metallic film bounded by two sides media of nonlinear dielectric of arbitrary nonlinearity is studied by...The analytic surface plasmon polaritons （SPPs） dispersion relation is studied in a system consisting of a thin metallic film bounded by two sides media of nonlinear dielectric of arbitrary nonlinearity is studied by applying a generalised first integral approach. We consider both asymmetric and symmetric structures. Especially, in the symmetric system, two possible modes can exist： the odd mode and the even mode. The dispersion relations of the two modes are obtained. Due to the nonlinear dielectric, the magnitude of the electric field at the interface appears and alters the dispersion relations. The changes in SPPs dispersion relations depending on film thicknesses and nonlinearity are studied.展开更多
The alignment coupling between optical waveguide chips and optical fiber arrays is the basis of the alignment coupling of planar optical waveguide devices, and the precise position detection with angle and spacing adj...The alignment coupling between optical waveguide chips and optical fiber arrays is the basis of the alignment coupling of planar optical waveguide devices, and the precise position detection with angle and spacing adjustments is one of the key steps of alignment coupling. A methodology for position detection, and angle and spacing adjustment was proposed for optical waveguide chips and optical fiber arrays based on machine vision. The experimental results show angle detection precision levels higher than 0.05°, line detection precision levels higher than 0.1 μm, and detection time less than 2 s. Therefore, the system developed herein meets the precise requirements necessary for position detection, and angle and spacing adjustments for optical waveguide chips and optical fiber arrays.展开更多
A new scheme which generates multi-frequency terahertz(THz)waves from planar waveguide by the optimized cascaded difference frequency generation(OCDFG)is proposed.A THz wave with frequencyω_(T1)is generated by the OC...A new scheme which generates multi-frequency terahertz(THz)waves from planar waveguide by the optimized cascaded difference frequency generation(OCDFG)is proposed.A THz wave with frequencyω_(T1)is generated by the OCDFG with two infrared pump waves,and simultaneously a series of cascaded optical waves with a frequency intervalω_(T1)is generated.The THz wave with a frequency of M-timesω_(T1)is generated by mixing the m-th-order and the(m+M)-th-order cascaded optical wave.The phase mismatch distributions of cascaded difference frequency generation(CDFG)are modulated by changing the thickness of planar waveguide step by step,thereby satisfying the phase-matching condition from first-order to high-order cascaded Stokes process step by step.As a result,the intensity of THz wave can be enhanced and modulated by controlling the cascading order of OCDFG.展开更多
A hybrid structure based on a planar waveguide （PWG） mode coupling a long-range surface plasmon resonance （LRSPR） mode is proposed to enhance the GH shift. Both the PWG mode and LRSPR mode can be in strong resonan...A hybrid structure based on a planar waveguide （PWG） mode coupling a long-range surface plasmon resonance （LRSPR） mode is proposed to enhance the GH shift. Both the PWG mode and LRSPR mode can be in strong resonance, and these two modes can be coupled together due to the normal-mode splitting. The largest GH shift of PWG-coupled LRSPR structure is 4156 times that of the incident beam, which is 23 times and 3.6 times that of the surface plasmon resonance （SPR） structure and the LRSPR structure, respectively. As a GH shift sensor, the highest sensitivity of 4.68 x 107 λ is realized in the coupled structure. Compared with the sensitivity of the traditional SPR structure, the sensitivity of our structure is increased by more than 2 orders, which theoretically indicates that the proposed configuration can be applied to the field of high-sensitivity sensors in the future.展开更多
Sensitivities of three-layer and four-layer planar waveguide sensors having metamaterial as guiding layer are analyzed for p-polarization of incident light and compared with existing results. Proposed sensors show imp...Sensitivities of three-layer and four-layer planar waveguide sensors having metamaterial as guiding layer are analyzed for p-polarization of incident light and compared with existing results. Proposed sensors show improved cover layer sensitivity for each case of the cover layer refractive index. Also, proposed sensors demonstrate improved adlayer sensitivity for different values of adlayer thickness and adlayer refractive indices. It is observed that metamaterial has increased the evanescent field due to the unconventional nature of it, by which values of cover layer sensitivity as well as adlayer sensitivity are enhanced.展开更多
We present a diode-pumped high-energy ceramic Nd：YAG planar waveguide that is demonstrated as a record in output energy for the ceramic planar waveguide fabricated by nonaqueous tape casting and solid-state reactive ...We present a diode-pumped high-energy ceramic Nd：YAG planar waveguide that is demonstrated as a record in output energy for the ceramic planar waveguide fabricated by nonaqueous tape casting and solid-state reactive sintering. Under a repetition rate of 100 Hz and a pulse width of 250 μs, a maximum output pulse energy of 327 mJ is obtained with a beam quality factor of = 2.6 × 7.0. The corresponding peak power is 1308 W. The extraction efficiency of the system is about 56%.展开更多
文摘We present a theoretical analysis of corrugated long-period gratings in planar waveguides. In particular, we calculate the transmission spectra for both the TE and TM polarizations and highlight the polarization-independence conditions.
文摘Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractive index profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnder interferometer and applying fringe analysis methods.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61421062 and 61520106004)the Microsoft Research Fund of Asia
文摘In this paper, we consider the inverse scattering problem of reconstructing a bounded obstacle in a three-dimensional planar waveguide from the scattered near-field data measured on a finite cylindrical surface containing the obstacle and corresponding to infinitely many incident point sources also placed on the measurement surface. The obstacle is allowed to be an impenetrable scatterer or a penetrable scatterer. We establish the validity of the factorization method with the nearfield data to characterize the obstacle in the planar waveguide by constructing an outgoing-to-incoming operator which is an integral operator defined on the measurement surface with the kernel given in terms of an infinite series.
基金supported by the National Natural Science Foundation of China(Grant Nos.62175050 and U2341245)the Fundamental Research Funds for the Central Universities(Grant No.HIT.OCEF.2024054).
文摘Diffractive optical neural networks(DONNs)have exhibited the advantages of parallelization,high speed,and low consumption.However,the existing DONNs based on free-space diffractive optical elements are bulky and unsteady.In this study,we propose a planar-waveguide integrated diffractive neural network chip architecture.The three diffractive layers are engraved on the same side of a quartz wafer.The three-layer chip is designed with 32-mm3 processing space and enables a computing speed of 3.1×109 Tera operations per second.The results show that the proposed chip achieves 73.4%experimental accuracy for the Modified National Institute of Standards and Technology database while showing the system’s robustness in a cycle test.The consistency of experiments is 88.6%,and the arithmetic mean standard deviation of the results is~4.7%.The proposed chip architecture can potentially revolutionize high-resolution optical processing tasks with high robustness.
基金Project supported by the the Fundamental Research Funds for the Central Universities(Grant No.2023MS163).
文摘We study a generalized higher-order nonlinear Schr¨odinger equation in an optical fiber or a planar waveguide.We obtain the Lax pair and N-fold Darboux transformation(DT)with N being a positive integer.Based on Lax pair obtained by us,we derive the infinitely-many conservation laws.We give the bright one-,two-,and N-soliton solutions,and the first-,second-,and Nth-order breather solutions based on the N-fold DT.We conclude that the velocities of the bright solitons are influenced by the distributed gain function,g(z),and variable coefficients in equation,h_(1)(z),p_(1)(z),r_(1)(z),and s_(1)(z)via the asymptotic analysis,where z represents the propagation variable or spatial coordinate.We also graphically observe that:the velocities of the first-and second-order breathers will be affected by h_(1)(z),p_(1)(z),r_(1)(z),and s_(1)(z),and the background wave depends on g(z).
文摘TiO2/ ormosil planar waveguide was prepared by sol-gel method at low thermal treatment temperature （ 〈 200 ℃）. Scanning electron microscope, FT-IR spectrometer, spectrophotometer, atomic force microscopy, thermal analyzer, and dark m-line spectroscopy were used with the method of scattering-detection to investigate optical and structural properties. High optical quality waveguide film was obtained. The propagation loss of film was 0.569 dB/cm at a wavelength of 632.8 nm.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61735010,31671580,and 61601183)Natural Science Foundation of Henan Province,China(Grant No.162300410190)Program for Science&Technology Innovation Talents in Universities of Henan Province,China(Grant No.18HASTIT023)。
文摘A novel scheme for high-efficiency terahertz(THz)wave generation based on optimized cascaded difference frequency generation(OCDFG)with planar waveguide is presented.The phase mismatches of each-order cascaded difference frequency generation(CDFG)are modulated by changing the thickness of the waveguide,resulting in a decrement of phase mismatches in cascaded Stokes processes and an increment of phase mismatches in cascaded anti-Stokes processes simultaneously.The modulated phase mismatches enhance the cascaded Stokes processes and suppress the cascaded anti-Stokes processes simultaneously,yielding energy conversion efficiencies over 25%from optical wave to THz wave at 100 K.
基金Program of the Science and technology Depart ment of Fujian Province(2007F5040)Natural Science Foundation of Fujian Province(A0540001)
文摘Based on Rayleigh-Sommerfeld scalar diffraction formula, analyzed is the diffraction field distribution of the restricted output end surface of multiple quantum wells planar waveguide by slit. Obtained is its analytical expression of field distribution, which permits accurate and effective study on the characteristic of diffraction field from the restricted output end surface of the waveguide by slit. Then, the variation curve of the beam propagation factor M2 versus the slit width is computed by the second moment method. It is useful for understanding the restricted diffraction properties of the multiple quantum wells planar waveguide. When the slit half width is bigger than the core layer's half width, the beam propagation factor M2 value tends to a constant 1.108. Therefore, the corresponding field amplitude distribution is approximated by Gaussian function, and the far field divergence half angle(θ0,G=0.091 8) is calculated by matching efficiency method.
文摘Multilayer cladded slab waveguides have been solved by using asymptotic theory once or twice. Based on the solution of a three layer slab waveguide, the wave number of guided modes has been expanded in series of one or two small parameters. One side cladded slab, two side cladded slab and two parallel cladded slab waveguide system are demonstrated to show how to use this essentially analytic method. Numerical examples have also been given and compared with exact solutions, eved the first or second order solutions are highly accurate.
文摘The deposition of silicon dioxide by plasma enhanced chemical vapor deposition from tetraethylorthosilicate (TEOS) and H_2O has been studied.Silicon oxide with refractive index of 1453 has been obtained.Tests on the 51mm wafers show that both thickness uniformity of ±15% and constant refractive index of 1453 can be achieved.By raising the deposition temperature,the qualities have been improved,while the deposition rate decreased.A SiO_2 thick film deposition technique has been developed combining TEOS-PECVD technique with high temperature annealing.
文摘A novel design of 100GHz-spaced 16channel arrayed-waveguide grating (AWG) based on silica-on-silicon chip is reported.AWG is achieved by adding a Y-branch to the AWG and arranging the input/output channel in a neat row,so the whole configuration can be aligned and packaged using only one fiber-array.This configuration can decrease the device’s size,enlarge the minimum radius of curvature,save time on polishing and alignment,and reduce the chip’s fabrication cost.
基金The National Natural Science Foundation of China(No.60977038)the Specialized Research Fund for the Doctoral Program of Higher Education(No.20110092110016)+1 种基金the National Basic Research Program of China(973Program)(No.2011CB302004)the Foundation of Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology of Ministry of Education of China(No.201204)
文摘Based on attenuated total reflection （ATR） and thermo-optic effect, the polymeric thin film planar optical waveguide is used as the temperature sensor, and the factors influencing the sensitivity of the temperature sensor are comprehensively analyzed. Combined with theoretical analysis and experimental investigation, the sensitivity of the temperature sensor is related to the thicknesses of the upper cladding layer, the waveguide layer, the optical loss of the polymer material and the guided wave modes. The results show that the slope value about reflectivity and temperature, which stands for the sensitivity of the polymer thin film temperature sensor, is associated with the waveguide film thickness and the guided wave modes, and the slope value is the highest in the zero reflectance of a certain transverse electric （TE） mode. To improve the sensitivity of the temperature sensor, the sensor＇s working incident light exterior angle α should be chosen under a certain TE mode with the reflectivity to be zero. This temperature sensor is characterized by high sensitivity and simple structure and it is easily fabricated.
文摘This paper presents an optical sensor technique used in the damage evaluation which is formed by structurally integrated fiber optic reticulate sensors embedded in the composite materials. The fibers are processed by chemical method and their outsides are peeled to form particles of irregular distribution and they differ in size, so the slight disturbance range of stochastic wall are formed in fibers. According to the characteristics of power loss of waveguide mode caused by slight disturbance of stochastic wall and radiative mode transmission, the range of slight disturbance of stochastic wall may be served as the sensitive range of the sensor. On the basis of theory of slight disturbance of stochastic wall of planar optical waveguide, the relation between the corrosion time and the opposite power loss by experiments is investigated. In this paper, the measurement results of object of SIFORS are also presented. The results show that the optical sensor technique may be used in the damage evaluation of an aircraft.
基金supported by National Key Basic Research Program of China(973 Program)(Grant No.2011CB309700)National Natural Science Foundation of China(Grant Nos.11021101 and11321061)
文摘We propose a new reverse time migration method for reconstructing extended obstacles in the planar waveguide using acoustic waves at a fixed frequency. We prove the resolution of the reconstruction method in terms of the aperture and the thickness of the waveguide. The resolution analysis implies that the imaginary part of the cross-correlation imaging function is always positive and thus may have better stability properties.Numerical experiments are included to illustrate the powerful imaging quality and to confirm our resolution results.
基金supported by the National Basic Research Program of China (Grant No. 2010CB923202)
文摘The analytic surface plasmon polaritons （SPPs） dispersion relation is studied in a system consisting of a thin metallic film bounded by two sides media of nonlinear dielectric of arbitrary nonlinearity is studied by applying a generalised first integral approach. We consider both asymmetric and symmetric structures. Especially, in the symmetric system, two possible modes can exist： the odd mode and the even mode. The dispersion relations of the two modes are obtained. Due to the nonlinear dielectric, the magnitude of the electric field at the interface appears and alters the dispersion relations. The changes in SPPs dispersion relations depending on film thicknesses and nonlinearity are studied.
基金Projects(51475479,51075402)supported by the National Natural Science Foundation of ChinaProject(2012AA040406)supported by the National High Technology Research and Development Program of China+2 种基金Project(20110162130004)supported by the Research Fund for the Doctoral Program of Higher Education of ChinaProject(14JJ2010)supported by the Natural Science Foundation of Hunan Province,ChinaProject(GZKF-201401)supported by the Open Project of Stage Key Laboratory of Fluid Power Transmission and Control(Zhejiang University),China
文摘The alignment coupling between optical waveguide chips and optical fiber arrays is the basis of the alignment coupling of planar optical waveguide devices, and the precise position detection with angle and spacing adjustments is one of the key steps of alignment coupling. A methodology for position detection, and angle and spacing adjustment was proposed for optical waveguide chips and optical fiber arrays based on machine vision. The experimental results show angle detection precision levels higher than 0.05°, line detection precision levels higher than 0.1 μm, and detection time less than 2 s. Therefore, the system developed herein meets the precise requirements necessary for position detection, and angle and spacing adjustments for optical waveguide chips and optical fiber arrays.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61735010,31671580,and 61601183)the Natural Science Foundation of Henan Province,China(Grant No.162300410190)the Program for Science&Technology Innovation Talents in Universities of Henan Province,China(Grant No.18HASTIT023)。
文摘A new scheme which generates multi-frequency terahertz(THz)waves from planar waveguide by the optimized cascaded difference frequency generation(OCDFG)is proposed.A THz wave with frequencyω_(T1)is generated by the OCDFG with two infrared pump waves,and simultaneously a series of cascaded optical waves with a frequency intervalω_(T1)is generated.The THz wave with a frequency of M-timesω_(T1)is generated by mixing the m-th-order and the(m+M)-th-order cascaded optical wave.The phase mismatch distributions of cascaded difference frequency generation(CDFG)are modulated by changing the thickness of planar waveguide step by step,thereby satisfying the phase-matching condition from first-order to high-order cascaded Stokes process step by step.As a result,the intensity of THz wave can be enhanced and modulated by controlling the cascading order of OCDFG.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61505111 and 11604216)the China Postdoctoral Science Foundation(Grant No.2016M600667)+2 种基金the Science and Technology Planning Project of Guangdong Province,China(Grant No.2016B050501005)the Fund from the Educational Commission of Guangdong Province,China(Grant No.2016KCXTD006)the Natural Science Foundation of Guangdong Province,China(Grant No.2015A030313549)
文摘A hybrid structure based on a planar waveguide （PWG） mode coupling a long-range surface plasmon resonance （LRSPR） mode is proposed to enhance the GH shift. Both the PWG mode and LRSPR mode can be in strong resonance, and these two modes can be coupled together due to the normal-mode splitting. The largest GH shift of PWG-coupled LRSPR structure is 4156 times that of the incident beam, which is 23 times and 3.6 times that of the surface plasmon resonance （SPR） structure and the LRSPR structure, respectively. As a GH shift sensor, the highest sensitivity of 4.68 x 107 λ is realized in the coupled structure. Compared with the sensitivity of the traditional SPR structure, the sensitivity of our structure is increased by more than 2 orders, which theoretically indicates that the proposed configuration can be applied to the field of high-sensitivity sensors in the future.
文摘Sensitivities of three-layer and four-layer planar waveguide sensors having metamaterial as guiding layer are analyzed for p-polarization of incident light and compared with existing results. Proposed sensors show improved cover layer sensitivity for each case of the cover layer refractive index. Also, proposed sensors demonstrate improved adlayer sensitivity for different values of adlayer thickness and adlayer refractive indices. It is observed that metamaterial has increased the evanescent field due to the unconventional nature of it, by which values of cover layer sensitivity as well as adlayer sensitivity are enhanced.
基金supported by the Key Laboratory of Science and Technology on High Energy Lasers(China Academy of Engineering Physics)
文摘We present a diode-pumped high-energy ceramic Nd：YAG planar waveguide that is demonstrated as a record in output energy for the ceramic planar waveguide fabricated by nonaqueous tape casting and solid-state reactive sintering. Under a repetition rate of 100 Hz and a pulse width of 250 μs, a maximum output pulse energy of 327 mJ is obtained with a beam quality factor of = 2.6 × 7.0. The corresponding peak power is 1308 W. The extraction efficiency of the system is about 56%.
