Colorectal cancer is a common tumor of the digestive system and is the third leading cause of cancer-related death worldwide.The global incidence of colorectal cancer is currently increasing.In some patients,the tumor...Colorectal cancer is a common tumor of the digestive system and is the third leading cause of cancer-related death worldwide.The global incidence of colorectal cancer is currently increasing.In some patients,the tumor has already spread to nearby organs at the time of diagnosis,with the small intestine and bladder being common sites of invasion.[1,2]The diagnosis of colorectal cancer that has spread to the bladder can be challenging.Aside from a few patients who experience urinary symptoms due to invasion of the bladder trigone or the entire bladder wall,there are no distinct clinical signs,which often leads to misdiagnosis.The following case report details one such instance.展开更多
构建了一种基于IF模型的侧抑制神经网络群,用以实现位置定位.采用基于H-H模型简化的IF模型构造神经网络群并基于概率密度分布进行位置定位.在神经网络群学习过程中,运用PITS(progressive interactive training scheme)方法进行参数学习...构建了一种基于IF模型的侧抑制神经网络群,用以实现位置定位.采用基于H-H模型简化的IF模型构造神经网络群并基于概率密度分布进行位置定位.在神经网络群学习过程中,运用PITS(progressive interactive training scheme)方法进行参数学习,利用信息中心(IC)储存每次训练的结果,在保证输出收敛的情况下,比较跟踪结果的误差函数给出权值调整公式进行自学习.实验结果表明:基于IF模型构建的神经网络群可以实现位置定位.采用H-H模型简化的IF模型提高了学习效率和定位速度;运用PITS算法进行参数学习提高了定位精度.展开更多
Electrochemical techniques and fractal theory were employed to study the corrosion behaviors and pits distribution characteristics on the corroded surfaces of 304 stainless steel exposed in FeCl3 solution. Fractal fea...Electrochemical techniques and fractal theory were employed to study the corrosion behaviors and pits distribution characteristics on the corroded surfaces of 304 stainless steel exposed in FeCl3 solution. Fractal features of pits distribution over the corroded surfaces were observed and described by the fractal dimension. A 5-8-2 back-propagation （BP） artificial neural network model for the diagnoses of the pitting corrosion rate and pits deepness of 304 stainless steel under various conditions was developed by considering the fractal dimension as a key parameter for describing the pitting corrosion characteristics. The predicted results are well in agreement with the experimental data of pitting corrosion rate and pit deepness. The max relative errors between their experimental and simulation data are 6.69% and 4.62%, respectively.展开更多
Date pits for feed preparation or oil extraction are soaked in water to soften before milling or extrusion. Knowledge of water absorption by the date pits helps in better managing the soaking duration. In this researc...Date pits for feed preparation or oil extraction are soaked in water to soften before milling or extrusion. Knowledge of water absorption by the date pits helps in better managing the soaking duration. In this research, the process of water absorption by date pits was modeled and analyzed using Fick's second law of diffusion, finite element approach, and Peleg model. The moisture content of the pits reached to its saturation level of 41.5% (wet basis) after 10 d. The estimated coefficient of diffusion was 9.89×10-12 m2/s. The finite element model with a proposed ellipsoid geometry for a single date pit and the analytical model fitted better to the experimental data with R2 of 0.98. The former model slightly overestimated the moisture content of the pits during the initial stages of the soaking and the latter model generally underestimated this variable through the entire stages of soaking process.展开更多
On top of Shigujian Peak(1477 m a.s.l.) of the Dayangshan Mountain in Jinyun County, Zhejiang Province, large amounts of granite pits with diameters ranging from several dozens of centimeters to around one meter and d...On top of Shigujian Peak(1477 m a.s.l.) of the Dayangshan Mountain in Jinyun County, Zhejiang Province, large amounts of granite pits with diameters ranging from several dozens of centimeters to around one meter and depth from 10 cm to 45 cm are found on rock surface.These pits mainly appear on the NE and SE sides, and their drainage mouths are in the same direction.The identification results through micropolariscope and X-ray fluorescence spectrometer reveal that bedrock of pits is from middle to fine-grained moyite being apt to be weathered and modified.In Dayangshan region the annual mean temperature is 9.2℃ and annual precipitation is over 1700 mm.On the one hand, there always experiences a period of periglacial action with temperature oscillating near 0℃ for 4 months, i.e., from December to March next year.As a consequence, the freezing-thawing cycles may be remarkable to disintegrate the bedrock.On the other hand, the windward slope of Shigujian Peak meets typhoon of over force 10 on the Beaufort scale in summer, therefore, the blowing makes suspending sands or pebbles grind in swirling form.Based on field investigation and periglacial geomorphic theory, the pits on top of Shigujian Peak are attributed to freez-ing-thawing of periglacial action.Meanwhile, storm and strong wind accelerate the process.Observation shows that both the actions are still undergoing and variant directions of wind are the main cause for making different shapes of the pits.Because the top of Shigujian is 1500 m lower than the present snow line, some scholars considered that"glacial pothole"formed in the Quaternary is hard to work, even though in the Last Glacial Maximum(LGM).展开更多
The lower slope of furrow pits has following special features: small extent of weathering destruction, short time of production blasting damage, good arching effect of lower slope with small curvature radius, and good...The lower slope of furrow pits has following special features: small extent of weathering destruction, short time of production blasting damage, good arching effect of lower slope with small curvature radius, and good bottom effect of a pit end for transferring and bearing initial horizontal stresses in lower slope. The new principles provided theoretical basis for convex slope in furrow pits to reduce stripping. Similar phenomena and examples are supplied simultaneously.展开更多
Carrier transport via the V-shaped pits （V-pits） in InGaN/GaN multiple-quantum-well （MQW） solar cells is numer- ically investigated. By simulations, it is found that the V-pits can act as effective escape paths fo...Carrier transport via the V-shaped pits （V-pits） in InGaN/GaN multiple-quantum-well （MQW） solar cells is numer- ically investigated. By simulations, it is found that the V-pits can act as effective escape paths for the photo-generated carriers. Due to the thin barrier thickness and low indium composition of the MQW on V-pit sidewall, the carriers entered the sidewall QWs can easily escape and contribute to the photocurrent. This forms a parallel escape route for the carries generated in the fiat quantum wells. As the barrier thickness of the fiat MQW increases, more carriers would transport via the V-pits. Furthermore, it is found that the V-pits may reduce the recombination losses of carriers due to their screening effect to the dislocations. These discoveries are not only helpful for understanding the carrier transport mechanism in the InGaN/GaN MQW, but also important in design of the structure of solar cells.展开更多
The value distribution of entire functions defined by Dirichlet series are studied in this present article.It is proved that entire functions defined by Dirichlet series have the pits property,which improve the relati...The value distribution of entire functions defined by Dirichlet series are studied in this present article.It is proved that entire functions defined by Dirichlet series have the pits property,which improve the relative results on lacunary Taylor series obtained by Littlewood J.E.and Offord A.C.展开更多
We present a new method of making a textured V-pit surface for improving the light extraction efficiency in GaN- based light-emitting diodes and compare it with the usual low-temperature method for p-GaN V-pits. Three...We present a new method of making a textured V-pit surface for improving the light extraction efficiency in GaN- based light-emitting diodes and compare it with the usual low-temperature method for p-GaN V-pits. Three types of GaNbased light-emitting diodes （LEDs） with surface V-pits in different densities and regions were grown by metal-organic chemical vapor deposition. We achieved the highest output power and lowest forward voltage values with the p-InGaN V-pit LED. The V-pits enhanced the light output power values by 1.45 times the values of the conventional LED owing to an enhancement of the light scattering probability and an effective reduction of Mg-acceptor activation energy. Moreover, this new technique effectively solved the higher forward voltage problem of the usual V-pit LED.展开更多
In GaN-based green light-emitting diodes（LEDs） with and without Mg-preflow before the growth of p-Al GaN electron blocking layer（EBL） are investigated experimentally.A higher Mg doping concentration is achieved in...In GaN-based green light-emitting diodes（LEDs） with and without Mg-preflow before the growth of p-Al GaN electron blocking layer（EBL） are investigated experimentally.A higher Mg doping concentration is achieved in the EBL after Mg-preflow treatment,effectively alleviating the commonly observed efficiency collapse and electrons overflowing at cryogenic temperatures.However,unexpected decline in quantum efficiency is observed after Mg-preflow treatment at room temperature.Our conclusions are drawn such that the efficiency decline is probably the result of different emission positions.Higher Mg doping concentration in the EBL after Mg-preflow treatment will make it easier for a hole to be injected into multiple quantum wells with emission closer to pGaN side through the（8-plane rather than the V-shape pits,which is not favorable to luminous efficiency due to the preferred occurrence of accumulated strain relaxation and structural defects in upper QWs closer to p-GaN.Within this framework,apparently disparate experimental observations regarding electroluminescence properties,in this work,are well reconciled.展开更多
Biodiesel production had received a considerable attention as a green, non-toxic and renewable alternative to petroleum diesel. To avoid using vegetable oils, which are expensive and compete with food, as feedstock, w...Biodiesel production had received a considerable attention as a green, non-toxic and renewable alternative to petroleum diesel. To avoid using vegetable oils, which are expensive and compete with food, as feedstock, waste oils have been proposed. However, these waste materials contain a large amount of free fatty acids that complicates the production process. In this work, biodiesel production using an alternative feedstock;namely oils from date-pits, has been investigated. These oils have the same favorable features of straight oils, and at the same time are considered waste, since they are extracted from a waste material. The yield of oils extracted using n-hexane in a Soxhlet apparatus was compared to that of oils extracted using methanol-chloroform solvent mixture. The extracted oils were then converted to biodiesel via transesterification with methanol in presence of Novozym𪥣 or Eversa®Transform. The highest oils extraction yield of 11.7%, per dry weight sample, was obtained using Soxhlet extraction apparatus compared to 8.9% using methanol-chloroform mixture. The highest biodiesel production yield was 30% of the oil used, achieved after 6 hours using Novozym𪥣 at 40°C, 5:1 methanol to oil molar ratio and 10wt% enzyme loading. By using a chemical alkaline catalyst, NaOH, at the same conditions, the yield was 27%.展开更多
Studies were carried out to assess the effect of distance of sanitary pits on the microbial and heavy metal levels in hand dug well water samples consumed by people living in Akwuke, Enugu South Local government area ...Studies were carried out to assess the effect of distance of sanitary pits on the microbial and heavy metal levels in hand dug well water samples consumed by people living in Akwuke, Enugu South Local government area of Enugu State, using standard biochemical and spectrophotometric analysis. The well water samples were digested with aqua-regia and four heavy metals (Pb, Cd, Cu and Zn) were assayed in the well water samples at sampling distances of 3, 6 and 10 m respectively from the sanitary pits. The range of mean bacterial counts (cfu/g) for the four detected pathogenic bacteria;<em> S. aureus</em>, <em>Klebsiella pnemeoniae</em>, <em>Echerichia coli</em> and <em>Salmonella enteritidis </em>were 83 - 3730, 510 - 870, 50 - 2535 and 240 - 3420 Cfu/g at sampling distances of 3, 6 and 10 m respectively from the sanitary pits. The mean bacteria counts of the four detected pathogenic organisms in the well water sample at sampling distances of 3 and 6 m respectively from the sanitary pits were above the WHO recommended threshold limits for a safe drinking water. The mean bacterial counts of <em>Salmonella enteritidis</em> in the well water samples of sampling distance of 10 m from the sanitary pits was above the WHO recommended permissible limits. At sampling distances of 3, 6 and 10 m from the sanitary pits, the mean range of Pb, Cd, Cu and Zn in the well water samples were, 0.03 - 0.3, 0.02 - 0.05, 0.46 - 1.71 and 1.63 - 7.03 μg/g respectively. The mean levels of Pb and Cd in the well water samples at sampling distances of 3 and 6 m respectively from the sanitary pits were above their respective WHO recommended threshold limits. The mean heavy metals (Cd, Pb, Cu and Zn) in the well water samples at sampling distances of 3, 6, and 10 m respectively from the sanitary pits were statistically significant at p < 0.05.展开更多
Studies were carried out to evaluate the effect of distance of sanitary pits on the physicochemical properties of hand-dug well water samples consumed by people living in Akwuke community, Enugu South Local Government...Studies were carried out to evaluate the effect of distance of sanitary pits on the physicochemical properties of hand-dug well water samples consumed by people living in Akwuke community, Enugu South Local Government Area of Enugu State, using standard analytical procedures and instrumentation. The mean range of pH, turbidity, electrical conductivity, total dissolved solids, nitrate and sulphate in the well water samples at the determined sampling distances of 3, 6 and 10 m from the sanitary pits were 5.9 - 7.24, 1.92 - 6.63 NTU, 122.03 - 303.91 μs/cm, 100.00 - 261.90 mg/L, 1.21 - 4.68 mg/L and 28.89 - 49/61 mg/L respectively. The investigated mean physicochemical parameters of the well water samples were generally observed to increase with decrease in the distance of the well water samples from the sanitary pits. The levels of the determined physicochemical parameter of the well water samples at sampling distances of 3, 6, and 10 m respectively from the sanitary pits were statistically significant. The mean pH values of the well water samples at sampling distances of 3 and 6 m respectively from the sanitary pits were below the WHO recommended threshold limits for safe drinking water. Additionally, the mean values of turbidity and total dissolved solids of the well water samples at a sampling distance of 3 m from the sanitary pits were above the WHO permissible limits. The pH, turbidity and total dissolved solids are some of the most important parameters used in assessing the quality of any water source, therefore, the poor physicochemical properties of well water samples at a sampling distance of 3 m from the sanitary pits could put at severe health risk consumption of this water over a prolonged time. Siting well water at a reasonable far distance (above 10 m) for sanitary pits especially in communities with severe water scarcity would definitely help guarantee access to safe drinking water by rural as well as urban dwellers in Nigeria.展开更多
Enfocus将在IPEX2006展会上预展它的Pitstop Professional 7。这是该公司最畅销的Pitstop Professional软件的最新版本，具有极高的生产力和实用性。Pitstop Professional 7的推出标志着Enfocus公司完成了将其所有程序并入Pitstop系列...Enfocus将在IPEX2006展会上预展它的Pitstop Professional 7。这是该公司最畅销的Pitstop Professional软件的最新版本，具有极高的生产力和实用性。Pitstop Professional 7的推出标志着Enfocus公司完成了将其所有程序并入Pitstop系列软件的过程。展开更多
The management of overburden is an important task in open pit exploitations. Site topography and morphology as well as geological and geotechnical properties of natural and remoulded materials are the most important f...The management of overburden is an important task in open pit exploitations. Site topography and morphology as well as geological and geotechnical properties of natural and remoulded materials are the most important factors affecting the disposal phase. Economic and environmental requirements must be followed in order to achieve the best reclamation results, keeping into account site constraints such as slope stability, hauling and dumping issues, and interactions with groundwater. This paper deals with the above mentioned issues, illustrating a rational approach applied on the case of a large limestone quarry where the thickness of the overburden is relevant and the spoil material has to be dumped in a flooded pit. The proposed multidisciplinary approach led to the selection of most suitable methods for excavation, transportation and disposal. The selection was based on a detailed laboratory and site characterisation that defined favorable and adverse factors to be considered during the preliminary study of a large quarrying project.展开更多
A multi-scale model is developed to link the continuum damage variable in macroscale to the number density of multiple pits and cracks in microscale for studying the corrosion fatigue of aluminum alloy from multi-scal...A multi-scale model is developed to link the continuum damage variable in macroscale to the number density of multiple pits and cracks in microscale for studying the corrosion fatigue of aluminum alloy from multi-scale viewpoint.The developed model is used to predict the coherent multi-scale corrosion fatigue process of aluminum alloy component in the 3.5 wt% NaC1water solution under constant stress amplitude at a nominal frequency of 5Hz, and the numerical prediction results are compared with the experimental results.It shows that the model is effective and can be used to study the corrosion fatigue mechanisms of alurninum alloy from both macro and microscale viewpoints.展开更多
To indirectly investigate the dislocation behavior of Fe-36wt%Ni Invar alloy by the etch pit method, polished Invar specimens were etched by a solution containing 4 g copper sulfate, 20 mL hydrochloric acid, and 20 mL...To indirectly investigate the dislocation behavior of Fe-36wt%Ni Invar alloy by the etch pit method, polished Invar specimens were etched by a solution containing 4 g copper sulfate, 20 mL hydrochloric acid, and 20 mL deionized water for 2 min. Etch pits in the etched surfaces were observed. All the etch pits in one specific grain exhibited similar shapes, which are closely related to the grain orienta-tions. These etch pits were characterized as dislocation etch pits. It was observed that etch pits arranged along grain boundaries, gathered at grain tips and strip-like etch pit clusters passed through a number of grains in the pure Invar specimens. After the addition of a small amount of alloying elements, the identification of a single dislocation etch pit is challenging compared with the pure Invar alloy. Thus, the observation of etch pits facilitates the investigation on the dislocation behavior of the pure Invar alloy. In addition, alloying elements may affect the densities and sizes of etch pits.展开更多
A total of 80 weathering pits （gnammas）, located on granite surfaces of Qing Mountain （青山）, Hexigten （克什克腾） Global Geopark, Inner Mongolia, were identified and measured in terms of dimensional and orientat...A total of 80 weathering pits （gnammas）, located on granite surfaces of Qing Mountain （青山）, Hexigten （克什克腾） Global Geopark, Inner Mongolia, were identified and measured in terms of dimensional and orientational features. This article attempts to extract characteristics of the weathering pits by descriptive statistics and orientation rose diagrams, investigate the multi-phase evolution by the modified gnamma morphological analysis （GMA） method, and shed new light on the possible genesis and the influencing factors. Following the modified GMA method, weathering pits in Qing Mountain have been divided into six groups and compared with analogous sites to deduce their approximate age, which might be no older than 30 ka B.P., and explore the possibility that the multi-phase evolution of weathering pits may arise from responses to climate change. In consequence, we suggest that the combination of weathering, especially salt weathering, and wind erosion, both of which are closely related to climatic variation, take the main responsibility for the formation and development of weathering pits in Qing Mountain.展开更多
To ensure the safety of buildings surrounding foundation pits, a study was made on a settlement monitoring and trend prediction method. A statistical testing method for analyzing the stability of a settlement monitori...To ensure the safety of buildings surrounding foundation pits, a study was made on a settlement monitoring and trend prediction method. A statistical testing method for analyzing the stability of a settlement monitoring datum has been discussed. According to a comprehensive survey, data of 16 stages at operating control point, were verified by a standard t test to determine the stability of the operating control point. A stationary auto-regression model, AR(p), used for the observation point settlement prediction has been investigated. Given the 16 stages of the settlement data at an observation point, the applicability of this model was analyzed. Settlement of last four stages was predicted using the stationary auto-regression model AR (1); the maximum difference between predicted and measured values was 0.6 mm, indicating good prediction results of the model. Hence, this model can be applied to settlement predictions for buildings surrounding foundation pits.展开更多
The contents and distribution characteristics of ions, n-alkanes, and polycyclic aromatic hydrocarbons in snow pits on the Yuzhufcng （YZF） Glacier and the Xiao Dongkernadi （XDKMD） Glacier are studied. Parameter ch...The contents and distribution characteristics of ions, n-alkanes, and polycyclic aromatic hydrocarbons in snow pits on the Yuzhufcng （YZF） Glacier and the Xiao Dongkernadi （XDKMD） Glacier are studied. Parameter characteristics and correlation coefficients between ions and two organic compounds are used to explore the possible sources of these chemical compositions. The results indicated that both glaciers are influenced by west wind circulation, but the contents of ions, n-alkanes, and polycyclic aromatic hydrocarbons in the YZF Glacier are higher than in the XDKMD Glacier because of differences in geographical position. The ratios of ∑nC21^-/∑nC22^＋ and CPI values （CPI： carbon preference index） indicate that the n-alkanes from natural sources in these two glaciers are mainly derived from higher plants, whereas the contribution from lower organisms was small, also, n-alkanes from anthropogenic sources in the YZF Glacier are higher than in the XDKMD Glacier. The ratios of LPAHs/HPAHs and （Fly＋Pyr）/（BghiP＋INP） indicate that the polycyclic aromatic hydrocarbons in these two glaciers are mainly derived from low temperature combustion of coal and biomass, and, in the XDKMD Glacier, partially from the vehicle exhaust.展开更多
基金supported by the Project of National Natural Science Foundation(82372206)the Project of Jiangsu Provincial Health Commission(H2023107)the Project of Basic and Clinical Research on Cardiac Arrest in the Emergency and Critical Care Department of the Second Affi liated Hospital of Soochow University(XKTJ-XK202408-2).
文摘Colorectal cancer is a common tumor of the digestive system and is the third leading cause of cancer-related death worldwide.The global incidence of colorectal cancer is currently increasing.In some patients,the tumor has already spread to nearby organs at the time of diagnosis,with the small intestine and bladder being common sites of invasion.[1,2]The diagnosis of colorectal cancer that has spread to the bladder can be challenging.Aside from a few patients who experience urinary symptoms due to invasion of the bladder trigone or the entire bladder wall,there are no distinct clinical signs,which often leads to misdiagnosis.The following case report details one such instance.
文摘构建了一种基于IF模型的侧抑制神经网络群,用以实现位置定位.采用基于H-H模型简化的IF模型构造神经网络群并基于概率密度分布进行位置定位.在神经网络群学习过程中,运用PITS(progressive interactive training scheme)方法进行参数学习,利用信息中心(IC)储存每次训练的结果,在保证输出收敛的情况下,比较跟踪结果的误差函数给出权值调整公式进行自学习.实验结果表明:基于IF模型构建的神经网络群可以实现位置定位.采用H-H模型简化的IF模型提高了学习效率和定位速度;运用PITS算法进行参数学习提高了定位精度.
基金the Natural Science Foundation of Liaoning Province (No.972210)
文摘Electrochemical techniques and fractal theory were employed to study the corrosion behaviors and pits distribution characteristics on the corroded surfaces of 304 stainless steel exposed in FeCl3 solution. Fractal features of pits distribution over the corroded surfaces were observed and described by the fractal dimension. A 5-8-2 back-propagation （BP） artificial neural network model for the diagnoses of the pitting corrosion rate and pits deepness of 304 stainless steel under various conditions was developed by considering the fractal dimension as a key parameter for describing the pitting corrosion characteristics. The predicted results are well in agreement with the experimental data of pitting corrosion rate and pit deepness. The max relative errors between their experimental and simulation data are 6.69% and 4.62%, respectively.
文摘Date pits for feed preparation or oil extraction are soaked in water to soften before milling or extrusion. Knowledge of water absorption by the date pits helps in better managing the soaking duration. In this research, the process of water absorption by date pits was modeled and analyzed using Fick's second law of diffusion, finite element approach, and Peleg model. The moisture content of the pits reached to its saturation level of 41.5% (wet basis) after 10 d. The estimated coefficient of diffusion was 9.89×10-12 m2/s. The finite element model with a proposed ellipsoid geometry for a single date pit and the analytical model fitted better to the experimental data with R2 of 0.98. The former model slightly overestimated the moisture content of the pits during the initial stages of the soaking and the latter model generally underestimated this variable through the entire stages of soaking process.
基金Regional landform and landscape survey programme of the Zhejiang Institute of Geological Survey
文摘On top of Shigujian Peak(1477 m a.s.l.) of the Dayangshan Mountain in Jinyun County, Zhejiang Province, large amounts of granite pits with diameters ranging from several dozens of centimeters to around one meter and depth from 10 cm to 45 cm are found on rock surface.These pits mainly appear on the NE and SE sides, and their drainage mouths are in the same direction.The identification results through micropolariscope and X-ray fluorescence spectrometer reveal that bedrock of pits is from middle to fine-grained moyite being apt to be weathered and modified.In Dayangshan region the annual mean temperature is 9.2℃ and annual precipitation is over 1700 mm.On the one hand, there always experiences a period of periglacial action with temperature oscillating near 0℃ for 4 months, i.e., from December to March next year.As a consequence, the freezing-thawing cycles may be remarkable to disintegrate the bedrock.On the other hand, the windward slope of Shigujian Peak meets typhoon of over force 10 on the Beaufort scale in summer, therefore, the blowing makes suspending sands or pebbles grind in swirling form.Based on field investigation and periglacial geomorphic theory, the pits on top of Shigujian Peak are attributed to freez-ing-thawing of periglacial action.Meanwhile, storm and strong wind accelerate the process.Observation shows that both the actions are still undergoing and variant directions of wind are the main cause for making different shapes of the pits.Because the top of Shigujian is 1500 m lower than the present snow line, some scholars considered that"glacial pothole"formed in the Quaternary is hard to work, even though in the Last Glacial Maximum(LGM).
文摘The lower slope of furrow pits has following special features: small extent of weathering destruction, short time of production blasting damage, good arching effect of lower slope with small curvature radius, and good bottom effect of a pit end for transferring and bearing initial horizontal stresses in lower slope. The new principles provided theoretical basis for convex slope in furrow pits to reduce stripping. Similar phenomena and examples are supplied simultaneously.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61564007 and 11364034)the Sci-Tech Support Plan of Jiangxi Province,China(Grant No.20141BBE50035)
文摘Carrier transport via the V-shaped pits （V-pits） in InGaN/GaN multiple-quantum-well （MQW） solar cells is numer- ically investigated. By simulations, it is found that the V-pits can act as effective escape paths for the photo-generated carriers. Due to the thin barrier thickness and low indium composition of the MQW on V-pit sidewall, the carriers entered the sidewall QWs can easily escape and contribute to the photocurrent. This forms a parallel escape route for the carries generated in the fiat quantum wells. As the barrier thickness of the fiat MQW increases, more carriers would transport via the V-pits. Furthermore, it is found that the V-pits may reduce the recombination losses of carriers due to their screening effect to the dislocations. These discoveries are not only helpful for understanding the carrier transport mechanism in the InGaN/GaN MQW, but also important in design of the structure of solar cells.
基金supported by National Basic Research Program of China(973 Program,2005CB321902)National Natural Science Foundation of China(10771011)
文摘The value distribution of entire functions defined by Dirichlet series are studied in this present article.It is proved that entire functions defined by Dirichlet series have the pits property,which improve the relative results on lacunary Taylor series obtained by Littlewood J.E.and Offord A.C.
基金supported by the Natural Science Foundation of Fujian Province,China(Grant No.2012J01280)
文摘We present a new method of making a textured V-pit surface for improving the light extraction efficiency in GaN- based light-emitting diodes and compare it with the usual low-temperature method for p-GaN V-pits. Three types of GaNbased light-emitting diodes （LEDs） with surface V-pits in different densities and regions were grown by metal-organic chemical vapor deposition. We achieved the highest output power and lowest forward voltage values with the p-InGaN V-pit LED. The V-pits enhanced the light output power values by 1.45 times the values of the conventional LED owing to an enhancement of the light scattering probability and an effective reduction of Mg-acceptor activation energy. Moreover, this new technique effectively solved the higher forward voltage problem of the usual V-pit LED.
基金Supported by the National Key R&D Program of China under Grant Nos 2016YFB0400600 and 2016YFB0400601the State Key Program of the National Natural Science of China under Grant No 61334001+2 种基金the Key R&D Program of Jiangxi Province under Grant No 20165ABC28007the Natural Science Foundation of Jiangxi Province under Grant No 20151BAB207053the National Natural Science Foundation of China under Grant No 21405076
文摘In GaN-based green light-emitting diodes（LEDs） with and without Mg-preflow before the growth of p-Al GaN electron blocking layer（EBL） are investigated experimentally.A higher Mg doping concentration is achieved in the EBL after Mg-preflow treatment,effectively alleviating the commonly observed efficiency collapse and electrons overflowing at cryogenic temperatures.However,unexpected decline in quantum efficiency is observed after Mg-preflow treatment at room temperature.Our conclusions are drawn such that the efficiency decline is probably the result of different emission positions.Higher Mg doping concentration in the EBL after Mg-preflow treatment will make it easier for a hole to be injected into multiple quantum wells with emission closer to pGaN side through the（8-plane rather than the V-shape pits,which is not favorable to luminous efficiency due to the preferred occurrence of accumulated strain relaxation and structural defects in upper QWs closer to p-GaN.Within this framework,apparently disparate experimental observations regarding electroluminescence properties,in this work,are well reconciled.
文摘Biodiesel production had received a considerable attention as a green, non-toxic and renewable alternative to petroleum diesel. To avoid using vegetable oils, which are expensive and compete with food, as feedstock, waste oils have been proposed. However, these waste materials contain a large amount of free fatty acids that complicates the production process. In this work, biodiesel production using an alternative feedstock;namely oils from date-pits, has been investigated. These oils have the same favorable features of straight oils, and at the same time are considered waste, since they are extracted from a waste material. The yield of oils extracted using n-hexane in a Soxhlet apparatus was compared to that of oils extracted using methanol-chloroform solvent mixture. The extracted oils were then converted to biodiesel via transesterification with methanol in presence of Novozym𪥣 or Eversa®Transform. The highest oils extraction yield of 11.7%, per dry weight sample, was obtained using Soxhlet extraction apparatus compared to 8.9% using methanol-chloroform mixture. The highest biodiesel production yield was 30% of the oil used, achieved after 6 hours using Novozym𪥣 at 40°C, 5:1 methanol to oil molar ratio and 10wt% enzyme loading. By using a chemical alkaline catalyst, NaOH, at the same conditions, the yield was 27%.
文摘Studies were carried out to assess the effect of distance of sanitary pits on the microbial and heavy metal levels in hand dug well water samples consumed by people living in Akwuke, Enugu South Local government area of Enugu State, using standard biochemical and spectrophotometric analysis. The well water samples were digested with aqua-regia and four heavy metals (Pb, Cd, Cu and Zn) were assayed in the well water samples at sampling distances of 3, 6 and 10 m respectively from the sanitary pits. The range of mean bacterial counts (cfu/g) for the four detected pathogenic bacteria;<em> S. aureus</em>, <em>Klebsiella pnemeoniae</em>, <em>Echerichia coli</em> and <em>Salmonella enteritidis </em>were 83 - 3730, 510 - 870, 50 - 2535 and 240 - 3420 Cfu/g at sampling distances of 3, 6 and 10 m respectively from the sanitary pits. The mean bacteria counts of the four detected pathogenic organisms in the well water sample at sampling distances of 3 and 6 m respectively from the sanitary pits were above the WHO recommended threshold limits for a safe drinking water. The mean bacterial counts of <em>Salmonella enteritidis</em> in the well water samples of sampling distance of 10 m from the sanitary pits was above the WHO recommended permissible limits. At sampling distances of 3, 6 and 10 m from the sanitary pits, the mean range of Pb, Cd, Cu and Zn in the well water samples were, 0.03 - 0.3, 0.02 - 0.05, 0.46 - 1.71 and 1.63 - 7.03 μg/g respectively. The mean levels of Pb and Cd in the well water samples at sampling distances of 3 and 6 m respectively from the sanitary pits were above their respective WHO recommended threshold limits. The mean heavy metals (Cd, Pb, Cu and Zn) in the well water samples at sampling distances of 3, 6, and 10 m respectively from the sanitary pits were statistically significant at p < 0.05.
文摘Studies were carried out to evaluate the effect of distance of sanitary pits on the physicochemical properties of hand-dug well water samples consumed by people living in Akwuke community, Enugu South Local Government Area of Enugu State, using standard analytical procedures and instrumentation. The mean range of pH, turbidity, electrical conductivity, total dissolved solids, nitrate and sulphate in the well water samples at the determined sampling distances of 3, 6 and 10 m from the sanitary pits were 5.9 - 7.24, 1.92 - 6.63 NTU, 122.03 - 303.91 μs/cm, 100.00 - 261.90 mg/L, 1.21 - 4.68 mg/L and 28.89 - 49/61 mg/L respectively. The investigated mean physicochemical parameters of the well water samples were generally observed to increase with decrease in the distance of the well water samples from the sanitary pits. The levels of the determined physicochemical parameter of the well water samples at sampling distances of 3, 6, and 10 m respectively from the sanitary pits were statistically significant. The mean pH values of the well water samples at sampling distances of 3 and 6 m respectively from the sanitary pits were below the WHO recommended threshold limits for safe drinking water. Additionally, the mean values of turbidity and total dissolved solids of the well water samples at a sampling distance of 3 m from the sanitary pits were above the WHO permissible limits. The pH, turbidity and total dissolved solids are some of the most important parameters used in assessing the quality of any water source, therefore, the poor physicochemical properties of well water samples at a sampling distance of 3 m from the sanitary pits could put at severe health risk consumption of this water over a prolonged time. Siting well water at a reasonable far distance (above 10 m) for sanitary pits especially in communities with severe water scarcity would definitely help guarantee access to safe drinking water by rural as well as urban dwellers in Nigeria.
文摘Enfocus将在IPEX2006展会上预展它的Pitstop Professional 7。这是该公司最畅销的Pitstop Professional软件的最新版本，具有极高的生产力和实用性。Pitstop Professional 7的推出标志着Enfocus公司完成了将其所有程序并入Pitstop系列软件的过程。
文摘The management of overburden is an important task in open pit exploitations. Site topography and morphology as well as geological and geotechnical properties of natural and remoulded materials are the most important factors affecting the disposal phase. Economic and environmental requirements must be followed in order to achieve the best reclamation results, keeping into account site constraints such as slope stability, hauling and dumping issues, and interactions with groundwater. This paper deals with the above mentioned issues, illustrating a rational approach applied on the case of a large limestone quarry where the thickness of the overburden is relevant and the spoil material has to be dumped in a flooded pit. The proposed multidisciplinary approach led to the selection of most suitable methods for excavation, transportation and disposal. The selection was based on a detailed laboratory and site characterisation that defined favorable and adverse factors to be considered during the preliminary study of a large quarrying project.
基金Fundamental Research Funds for the Central Universities,Natural Science Foundation of Jiangsu Province (BK20170655,BK20170677),and the National Program on Key Research Project (2016YFC0701301-02).
文摘A multi-scale model is developed to link the continuum damage variable in macroscale to the number density of multiple pits and cracks in microscale for studying the corrosion fatigue of aluminum alloy from multi-scale viewpoint.The developed model is used to predict the coherent multi-scale corrosion fatigue process of aluminum alloy component in the 3.5 wt% NaC1water solution under constant stress amplitude at a nominal frequency of 5Hz, and the numerical prediction results are compared with the experimental results.It shows that the model is effective and can be used to study the corrosion fatigue mechanisms of alurninum alloy from both macro and microscale viewpoints.
文摘To indirectly investigate the dislocation behavior of Fe-36wt%Ni Invar alloy by the etch pit method, polished Invar specimens were etched by a solution containing 4 g copper sulfate, 20 mL hydrochloric acid, and 20 mL deionized water for 2 min. Etch pits in the etched surfaces were observed. All the etch pits in one specific grain exhibited similar shapes, which are closely related to the grain orienta-tions. These etch pits were characterized as dislocation etch pits. It was observed that etch pits arranged along grain boundaries, gathered at grain tips and strip-like etch pit clusters passed through a number of grains in the pure Invar specimens. After the addition of a small amount of alloying elements, the identification of a single dislocation etch pit is challenging compared with the pure Invar alloy. Thus, the observation of etch pits facilitates the investigation on the dislocation behavior of the pure Invar alloy. In addition, alloying elements may affect the densities and sizes of etch pits.
基金supported by China Geological Survey(No.11212011120118)the Fundamental Research Projects of China University of Geosciences,Beijing,China(No.2011YYL016)
文摘A total of 80 weathering pits （gnammas）, located on granite surfaces of Qing Mountain （青山）, Hexigten （克什克腾） Global Geopark, Inner Mongolia, were identified and measured in terms of dimensional and orientational features. This article attempts to extract characteristics of the weathering pits by descriptive statistics and orientation rose diagrams, investigate the multi-phase evolution by the modified gnamma morphological analysis （GMA） method, and shed new light on the possible genesis and the influencing factors. Following the modified GMA method, weathering pits in Qing Mountain have been divided into six groups and compared with analogous sites to deduce their approximate age, which might be no older than 30 ka B.P., and explore the possibility that the multi-phase evolution of weathering pits may arise from responses to climate change. In consequence, we suggest that the combination of weathering, especially salt weathering, and wind erosion, both of which are closely related to climatic variation, take the main responsibility for the formation and development of weathering pits in Qing Mountain.
基金Project 50279005 supported by the National Natural Science Foundation of China
文摘To ensure the safety of buildings surrounding foundation pits, a study was made on a settlement monitoring and trend prediction method. A statistical testing method for analyzing the stability of a settlement monitoring datum has been discussed. According to a comprehensive survey, data of 16 stages at operating control point, were verified by a standard t test to determine the stability of the operating control point. A stationary auto-regression model, AR(p), used for the observation point settlement prediction has been investigated. Given the 16 stages of the settlement data at an observation point, the applicability of this model was analyzed. Settlement of last four stages was predicted using the stationary auto-regression model AR (1); the maximum difference between predicted and measured values was 0.6 mm, indicating good prediction results of the model. Hence, this model can be applied to settlement predictions for buildings surrounding foundation pits.
基金supported by the Global Change Research Program of China (No.2010CB951404)the National Natural Science Foundation of China (Grant No.40930526,40801023,40871038)the West Light Foundation of the Chinese Academy of Sciences (Grant No.290928601)
文摘The contents and distribution characteristics of ions, n-alkanes, and polycyclic aromatic hydrocarbons in snow pits on the Yuzhufcng （YZF） Glacier and the Xiao Dongkernadi （XDKMD） Glacier are studied. Parameter characteristics and correlation coefficients between ions and two organic compounds are used to explore the possible sources of these chemical compositions. The results indicated that both glaciers are influenced by west wind circulation, but the contents of ions, n-alkanes, and polycyclic aromatic hydrocarbons in the YZF Glacier are higher than in the XDKMD Glacier because of differences in geographical position. The ratios of ∑nC21^-/∑nC22^＋ and CPI values （CPI： carbon preference index） indicate that the n-alkanes from natural sources in these two glaciers are mainly derived from higher plants, whereas the contribution from lower organisms was small, also, n-alkanes from anthropogenic sources in the YZF Glacier are higher than in the XDKMD Glacier. The ratios of LPAHs/HPAHs and （Fly＋Pyr）/（BghiP＋INP） indicate that the polycyclic aromatic hydrocarbons in these two glaciers are mainly derived from low temperature combustion of coal and biomass, and, in the XDKMD Glacier, partially from the vehicle exhaust.
