Thrust-vectoring capability has become a critical feature for propulsion systems as space missions move from static to dynamic.Thrust-vectoring is a well-developed area of rocket engine science.For electric propulsion...Thrust-vectoring capability has become a critical feature for propulsion systems as space missions move from static to dynamic.Thrust-vectoring is a well-developed area of rocket engine science.For electric propulsion,however,it is an evolving field that has taken a new leap forward in recent years.A review and analysis of thrust-vectoring schemes for electric propulsion systems have been conducted.The scope of this review includes thrust-vectoring schemes that can be implemented for electrostatic,electromagnetic,and beam-driven thrusters.A classification of electric propulsion schemes that provide thrust-vectoring capability is developed.More attention is given to schemes implemented in laboratory prototypes and flight models.The final part is devoted to a discussion on the suitability of different electric propulsion systems with thrust-vectoring capability for modern space mission operations.The thrust-vectoring capability of electric propulsion is necessary for inner and outer space satellites,which are at a disadvantage with conventional unidirectional propulsion systems due to their limited maneuverability.展开更多
In order to realize direct thrust control instead of conventional sensors-based control for aero-engine, a thrust estimator with high accuracy is designed by using the boosting technique to improve the performance of ...In order to realize direct thrust control instead of conventional sensors-based control for aero-engine, a thrust estimator with high accuracy is designed by using the boosting technique to improve the performance of least squares support vector regression （LSSVR）. There exist two distinct features compared with the conven- tional boosting technique： （1） Sampling without replacement is used to avoid numerical instability for modeling LSSVR. （2） To realize the sparseness of LSSVR and reduce the computational complexity, only a subset of the training samples is used to construct LSSVR. Thus, this boosting method for LSSVR is called the boosting sparse LSSVR （BSLSSVR）. Finally, simulation results show that BSLSSVR-based thrust estimator can satisfy the requirement of direct thrust control, i.e. , maximum absolute value of relative error of thrust estimation is not more than 5‰.展开更多
This paper presents the flight dynamical behavior of the thrust vectoring aircraft with extended bifurcation and continuation methods. In contrast to the standard bifurcation and continuation methods, the extended met...This paper presents the flight dynamical behavior of the thrust vectoring aircraft with extended bifurcation and continuation methods. In contrast to the standard bifurcation and continuation methods, the extended methods are capable of calculating the continuation curves of the equilibrium points for the particular type of trimming flight. Therefore, these methods can not only give the performance measures of aircraft, but also determine the stability of trimming points. In this paper, the methods are used to verify the effectiveness of the thrust vectoring control law, to define the flight envelope boundary, to analyze the stability and controllability of trimming flight, and to predict the departures of the instable flight. The result shows that the extended methods provide more flight dynamic information and are useful in preliminary design of the thrust vectoring aircraft.展开更多
The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an...The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an additional auxiliary duct.In this paper,the schlieren photographs at the exit of the high-efficiency SVCSN and the wall static pressure distributions were obtained by experiments,and the numerical results were used to enrich the thrust vectoring characteristics.The effects of the auxiliary injection were analyzed first to reveal the advantages of the high-efficiency SVCSN compared to the conventional SVCSN.Then,the aerodynamic parameters and the structural parameters of the high-efficiency SVCSN were investigated,including the Nozzle Pressure Ratio(NPR),the Secondary flow Pressure Ratio(SPR),the secondary flow relative area and the secondary flow injection angle.Finally,the coupling performance of the high-efficiency SVCSN is studied by using the approximate modeling technology.Results show that the auxiliary injection increases the range between the two shock legs of the “k”shock wave induced by the secondary flow,then causes the separation zone and high-pressure boss of the down wall to expand upstream,and finally results in a prominent increase in the thrust vectoring performance.The thrust vectoring angle and Vectoring Efficiency(VE)of the high-efficiency SVCSN are about 61.6%and 75.7%,respectively,higher than those of the conventional SVCSN at NPR=6.The effects of the NPR and the SPR on the thrust vectoring performance of the high-efficiency SVCSN are coupled with each other.A larger NPR matched with a smaller SPR shows better thrust vectoring performance.The maximum fluctuations in thrust vectoring angle and VE caused by the NPR and SPR are about 22%and 64%.The VE decreases monotonously with the increase of the secondary flow relative area.Smaller secondary flow injection angle shows better thrust vector performance,and the thrust vectoring angle and VE of the secondary flow injection angle of 90are about 20%higher than those of the secondary flow injection angle of 110at NPR=6.Therefore,the secondary flow relative area of 0.06 and the secondary flow injection angle of 90are recommended.展开更多
In order to realize direct thrust control instead of traditional sensor-based control for aero-engines,it is indispensable to design a thrust estimator with high accuracy,so a scheme for thrust estimator design based ...In order to realize direct thrust control instead of traditional sensor-based control for aero-engines,it is indispensable to design a thrust estimator with high accuracy,so a scheme for thrust estimator design based on the least square support vector regression machine is proposed to solve this problem. Furthermore,numerical simulations confirm the effectiveness of our presented scheme. During the process of estimator design,a wrapper criterion that can not only reduce the computational complexity but also enhance the generalization performance is proposed to select variables as input variables for estimator.展开更多
In this paper, a practical decoupling control scheme for fighter aircraft is proposed to achieve high angle of attack(AOA)tracking and super maneuver action by utilizing the thrust vector technology. Firstly, a six de...In this paper, a practical decoupling control scheme for fighter aircraft is proposed to achieve high angle of attack(AOA)tracking and super maneuver action by utilizing the thrust vector technology. Firstly, a six degree-of-freedom(DOF) nonlinear model with 12 variables is given. Due to low sufficiency of the aerodynamic actuators at high AOA, a thrust vector model with rotatable engine nozzles is derived. Secondly, the active disturbance rejection control(ADRC) is used to realize a three-channel decoupling control such that a strong coupling between different channels can be treated as total disturbance, which is estimated by the designed extended state observer. The control surface allocation is implemented by the traditional daisy chain method. Finally,the effectiveness of the presented control strategy is demonstrated by some numerical simulation results.展开更多
This paper proposes a method of using multi controllers to control supermaneuverable aircraft. A nonlinear dynamic inversion controller is used for supermaneuver. A gain scheduled controller is used for routine man...This paper proposes a method of using multi controllers to control supermaneuverable aircraft. A nonlinear dynamic inversion controller is used for supermaneuver. A gain scheduled controller is used for routine maneuver. A switch algorithm is designed to switch the controllers. The flight envelopes of the controllers are different but have a common area in which the controllers are switched from one to the other. In the common area, some special boundaries are selected to decide switch conditions. The controllers all use vector thrust for lower velocity maneuver control. Unlike the variation structure theory to use a single boundary, this paper uses two boundaries for switching between the two controllers. One boundary is used for switching from dynamic inversion to gain scheduling, while the other is used for switching from gain scheduling to dynamic inversion. This can effectively avoid the system vibration caused by switching repeatedly at a single boundary. The method is very easy for engineering. It can reduce the risk of design of the supermaneuverable aircraft.展开更多
To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to ...To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to the staggered electrodes, that is, a pair of electrodes on the same side wall are connected to generate an axial current in the channel. Under the action of the magnetic field perpendicular to the direction of the flow, the plasma is subjected to electromagnetic forces perpendicular to these two directions, and the jet is deflected. The computational model including the Navier-Stokes equations coupled with electromagnetic source terms, the electric potential equation and Ohm’s law is solved. The deflection of the gas jet under the action of an electromagnetic field is observed, and the maximum deflection angle is about 14.8°. The influences of the electric field, magnetic field, and conductivity on the jet deflection are studied. Results show that although the influences of these three factors on the deflection are similar, and the effect of increasing the electric field strength is slightly greater, priority should be given to increasing the magnetic field strength from the perspective of reducing energy consumption. The Stuart number is introduced to assess the ability of electromagnetic force to control jet deflection. When the electromagnetic parameters are constant, this solution provides better control of low-density and low-speed fluid flows. The calculation results show that using the staggered electrode method configuration is feasible in terms of controlling the deflection of a plasma jet deflection.展开更多
Based on the theory of EHD （electronhydrodynamic）, a simplified volume force model is applied to simulation to analyze the traits of plasma flow control in flow field, in which the cold plasma is generated by a DBD ...Based on the theory of EHD （electronhydrodynamic）, a simplified volume force model is applied to simulation to analyze the traits of plasma flow control in flow field, in which the cold plasma is generated by a DBD （dielectric-barrier-discharge） actuator. With the para- electric action of volume force in electric field, acceleration characteristics of the plasma flow are investigated for different excitation intensities of RF （radio frequency） power for the actuator. Furthermore, the plasma acceleration leads to an asymmetric distribution of flow field, and hence induces the deflection of jet plume, then results in a significant deflection angle of 6.26° thrustvectoring effect. It appears that the plasma flow control technology is a new tentative method for the thrust-vectoring control of a space vehicle.展开更多
This research paper presents a numerical study on the flow characteristics and performance of a baffled shock two-dimensional vector nozzle. The baffled shock vector nozzle is a type of fluid thrust vectoring nozzle t...This research paper presents a numerical study on the flow characteristics and performance of a baffled shock two-dimensional vector nozzle. The baffled shock vector nozzle is a type of fluid thrust vectoring nozzle that uses a secondary injection to deflect the primary flow and generate a vector angle. The fluid thrust vectoring technology is regarded as a key technology for the development of very low detectable vehicles because of its advantages, such as fast response, lightweight, and good stealth performance. The main objectives of this study are to investigate the effects of various parameters such as slot interval distance, slot width, injection angle, nozzle pressure ratio, secondary flow pressure ratio, and outflow Mach number on the deflection angle, thrust coefficient, thrust efficiency, and secondary flow ratio of the nozzle. The numerical simulations are carried out using the k-epsilon turbulence model, which is validated by comparing it with experimental data. The results indicate that optimizing the slot interval distance and width, increasing the injection angle, adjusting the nozzle pressure ratio and secondary flow pressure ratio, and controlling the outflow Mach number can enhance the nozzle performance. The results also reveal the complex flow phenomena inside the nozzle, such as shock wave interactions, flow separation and reattachment, and boundary layer effects. The study provides a comprehensive understanding of the flow characteristics and performance of a baffled shock two-dimensional vector nozzle and offers some guidance for its design and optimization.展开更多
Dual throat nozzle (DTN) is fast becoming a popular technique for thrust vectoring. The DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the u...Dual throat nozzle (DTN) is fast becoming a popular technique for thrust vectoring. The DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze the performance of a dual throat nozzle at various mass flow rates of secondary flow and nozzle pressure ratios (NPR). Two-dimensional, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. The present computational results were validated with available experimental data. Based on the present results, the control effectiveness of thrust-vectoring is discussed in terms of the thrust coefficient and the coefficient of discharge.展开更多
Aiming at the deficiencies of notch filters on the aspect of vibration suppression for elastic missile with swing nozzle thrust vector control(SNTVC),an active vibration controller(AVC)is proposed.It is composed of an...Aiming at the deficiencies of notch filters on the aspect of vibration suppression for elastic missile with swing nozzle thrust vector control(SNTVC),an active vibration controller(AVC)is proposed.It is composed of an optimal state feedback controller(OSFC)and an optimal minimal order state observer(OMOSO),which can be respectively designed based on the separation principle.The design rules of these two elements are successively given.Computer simulation results present that AVC can realize strong vibration suppression and good convergence property after disturbing.Moreover,it has simple design and then it is easily implemented in engineering.In addition,the AVC scheme can also resolve the poor system stability to a great extent,which is resulted from the bad static stability of missile body.展开更多
基金performed at large-scale research facility"Beam-M"of Bauman Moscow State Technical University following the government task by the Ministry of Science and Higher Education of the Russian Federation(No.FSFN-2024-0007).
文摘Thrust-vectoring capability has become a critical feature for propulsion systems as space missions move from static to dynamic.Thrust-vectoring is a well-developed area of rocket engine science.For electric propulsion,however,it is an evolving field that has taken a new leap forward in recent years.A review and analysis of thrust-vectoring schemes for electric propulsion systems have been conducted.The scope of this review includes thrust-vectoring schemes that can be implemented for electrostatic,electromagnetic,and beam-driven thrusters.A classification of electric propulsion schemes that provide thrust-vectoring capability is developed.More attention is given to schemes implemented in laboratory prototypes and flight models.The final part is devoted to a discussion on the suitability of different electric propulsion systems with thrust-vectoring capability for modern space mission operations.The thrust-vectoring capability of electric propulsion is necessary for inner and outer space satellites,which are at a disadvantage with conventional unidirectional propulsion systems due to their limited maneuverability.
基金Supported by the National Natural Science Foundation of China(50576033)the Aeronautical Science Foundation of China(04C52019)~~
文摘In order to realize direct thrust control instead of conventional sensors-based control for aero-engine, a thrust estimator with high accuracy is designed by using the boosting technique to improve the performance of least squares support vector regression （LSSVR）. There exist two distinct features compared with the conven- tional boosting technique： （1） Sampling without replacement is used to avoid numerical instability for modeling LSSVR. （2） To realize the sparseness of LSSVR and reduce the computational complexity, only a subset of the training samples is used to construct LSSVR. Thus, this boosting method for LSSVR is called the boosting sparse LSSVR （BSLSSVR）. Finally, simulation results show that BSLSSVR-based thrust estimator can satisfy the requirement of direct thrust control, i.e. , maximum absolute value of relative error of thrust estimation is not more than 5‰.
文摘This paper presents the flight dynamical behavior of the thrust vectoring aircraft with extended bifurcation and continuation methods. In contrast to the standard bifurcation and continuation methods, the extended methods are capable of calculating the continuation curves of the equilibrium points for the particular type of trimming flight. Therefore, these methods can not only give the performance measures of aircraft, but also determine the stability of trimming points. In this paper, the methods are used to verify the effectiveness of the thrust vectoring control law, to define the flight envelope boundary, to analyze the stability and controllability of trimming flight, and to predict the departures of the instable flight. The result shows that the extended methods provide more flight dynamic information and are useful in preliminary design of the thrust vectoring aircraft.
基金supported by the Science Center for Gas Turbine Project,China(Nos.P2022-B-Ⅱ-010-001 and P2022-B-I-002-001)the National Natural Science Foundation of China(Nos.52376032 and 52076180)+2 种基金the Funds for Distinguished Young Scholars of Shaanxi Province,China(No.2021JC-10)the National Science and Technology Major Project,China(No.J2019-Ⅱ-0015-0036)the Fundamental Research Funds for the Central Universities,China(No.501XTCX2023146001).
文摘The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an additional auxiliary duct.In this paper,the schlieren photographs at the exit of the high-efficiency SVCSN and the wall static pressure distributions were obtained by experiments,and the numerical results were used to enrich the thrust vectoring characteristics.The effects of the auxiliary injection were analyzed first to reveal the advantages of the high-efficiency SVCSN compared to the conventional SVCSN.Then,the aerodynamic parameters and the structural parameters of the high-efficiency SVCSN were investigated,including the Nozzle Pressure Ratio(NPR),the Secondary flow Pressure Ratio(SPR),the secondary flow relative area and the secondary flow injection angle.Finally,the coupling performance of the high-efficiency SVCSN is studied by using the approximate modeling technology.Results show that the auxiliary injection increases the range between the two shock legs of the “k”shock wave induced by the secondary flow,then causes the separation zone and high-pressure boss of the down wall to expand upstream,and finally results in a prominent increase in the thrust vectoring performance.The thrust vectoring angle and Vectoring Efficiency(VE)of the high-efficiency SVCSN are about 61.6%and 75.7%,respectively,higher than those of the conventional SVCSN at NPR=6.The effects of the NPR and the SPR on the thrust vectoring performance of the high-efficiency SVCSN are coupled with each other.A larger NPR matched with a smaller SPR shows better thrust vectoring performance.The maximum fluctuations in thrust vectoring angle and VE caused by the NPR and SPR are about 22%and 64%.The VE decreases monotonously with the increase of the secondary flow relative area.Smaller secondary flow injection angle shows better thrust vector performance,and the thrust vectoring angle and VE of the secondary flow injection angle of 90are about 20%higher than those of the secondary flow injection angle of 110at NPR=6.Therefore,the secondary flow relative area of 0.06 and the secondary flow injection angle of 90are recommended.
基金Sponsored by the National Natural Science Foundation of China ( Grant No 50576033)
文摘In order to realize direct thrust control instead of traditional sensor-based control for aero-engines,it is indispensable to design a thrust estimator with high accuracy,so a scheme for thrust estimator design based on the least square support vector regression machine is proposed to solve this problem. Furthermore,numerical simulations confirm the effectiveness of our presented scheme. During the process of estimator design,a wrapper criterion that can not only reduce the computational complexity but also enhance the generalization performance is proposed to select variables as input variables for estimator.
基金supported by the National Natural Science Foundation of China(61973175,61973172)。
文摘In this paper, a practical decoupling control scheme for fighter aircraft is proposed to achieve high angle of attack(AOA)tracking and super maneuver action by utilizing the thrust vector technology. Firstly, a six degree-of-freedom(DOF) nonlinear model with 12 variables is given. Due to low sufficiency of the aerodynamic actuators at high AOA, a thrust vector model with rotatable engine nozzles is derived. Secondly, the active disturbance rejection control(ADRC) is used to realize a three-channel decoupling control such that a strong coupling between different channels can be treated as total disturbance, which is estimated by the designed extended state observer. The control surface allocation is implemented by the traditional daisy chain method. Finally,the effectiveness of the presented control strategy is demonstrated by some numerical simulation results.
文摘This paper proposes a method of using multi controllers to control supermaneuverable aircraft. A nonlinear dynamic inversion controller is used for supermaneuver. A gain scheduled controller is used for routine maneuver. A switch algorithm is designed to switch the controllers. The flight envelopes of the controllers are different but have a common area in which the controllers are switched from one to the other. In the common area, some special boundaries are selected to decide switch conditions. The controllers all use vector thrust for lower velocity maneuver control. Unlike the variation structure theory to use a single boundary, this paper uses two boundaries for switching between the two controllers. One boundary is used for switching from dynamic inversion to gain scheduling, while the other is used for switching from gain scheduling to dynamic inversion. This can effectively avoid the system vibration caused by switching repeatedly at a single boundary. The method is very easy for engineering. It can reduce the risk of design of the supermaneuverable aircraft.
文摘To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to the staggered electrodes, that is, a pair of electrodes on the same side wall are connected to generate an axial current in the channel. Under the action of the magnetic field perpendicular to the direction of the flow, the plasma is subjected to electromagnetic forces perpendicular to these two directions, and the jet is deflected. The computational model including the Navier-Stokes equations coupled with electromagnetic source terms, the electric potential equation and Ohm’s law is solved. The deflection of the gas jet under the action of an electromagnetic field is observed, and the maximum deflection angle is about 14.8°. The influences of the electric field, magnetic field, and conductivity on the jet deflection are studied. Results show that although the influences of these three factors on the deflection are similar, and the effect of increasing the electric field strength is slightly greater, priority should be given to increasing the magnetic field strength from the perspective of reducing energy consumption. The Stuart number is introduced to assess the ability of electromagnetic force to control jet deflection. When the electromagnetic parameters are constant, this solution provides better control of low-density and low-speed fluid flows. The calculation results show that using the staggered electrode method configuration is feasible in terms of controlling the deflection of a plasma jet deflection.
基金supported by National Natural Science Foundation of China (No.90716025)
文摘Based on the theory of EHD （electronhydrodynamic）, a simplified volume force model is applied to simulation to analyze the traits of plasma flow control in flow field, in which the cold plasma is generated by a DBD （dielectric-barrier-discharge） actuator. With the para- electric action of volume force in electric field, acceleration characteristics of the plasma flow are investigated for different excitation intensities of RF （radio frequency） power for the actuator. Furthermore, the plasma acceleration leads to an asymmetric distribution of flow field, and hence induces the deflection of jet plume, then results in a significant deflection angle of 6.26° thrustvectoring effect. It appears that the plasma flow control technology is a new tentative method for the thrust-vectoring control of a space vehicle.
文摘This research paper presents a numerical study on the flow characteristics and performance of a baffled shock two-dimensional vector nozzle. The baffled shock vector nozzle is a type of fluid thrust vectoring nozzle that uses a secondary injection to deflect the primary flow and generate a vector angle. The fluid thrust vectoring technology is regarded as a key technology for the development of very low detectable vehicles because of its advantages, such as fast response, lightweight, and good stealth performance. The main objectives of this study are to investigate the effects of various parameters such as slot interval distance, slot width, injection angle, nozzle pressure ratio, secondary flow pressure ratio, and outflow Mach number on the deflection angle, thrust coefficient, thrust efficiency, and secondary flow ratio of the nozzle. The numerical simulations are carried out using the k-epsilon turbulence model, which is validated by comparing it with experimental data. The results indicate that optimizing the slot interval distance and width, increasing the injection angle, adjusting the nozzle pressure ratio and secondary flow pressure ratio, and controlling the outflow Mach number can enhance the nozzle performance. The results also reveal the complex flow phenomena inside the nozzle, such as shock wave interactions, flow separation and reattachment, and boundary layer effects. The study provides a comprehensive understanding of the flow characteristics and performance of a baffled shock two-dimensional vector nozzle and offers some guidance for its design and optimization.
文摘Dual throat nozzle (DTN) is fast becoming a popular technique for thrust vectoring. The DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze the performance of a dual throat nozzle at various mass flow rates of secondary flow and nozzle pressure ratios (NPR). Two-dimensional, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. The present computational results were validated with available experimental data. Based on the present results, the control effectiveness of thrust-vectoring is discussed in terms of the thrust coefficient and the coefficient of discharge.
文摘Aiming at the deficiencies of notch filters on the aspect of vibration suppression for elastic missile with swing nozzle thrust vector control(SNTVC),an active vibration controller(AVC)is proposed.It is composed of an optimal state feedback controller(OSFC)and an optimal minimal order state observer(OMOSO),which can be respectively designed based on the separation principle.The design rules of these two elements are successively given.Computer simulation results present that AVC can realize strong vibration suppression and good convergence property after disturbing.Moreover,it has simple design and then it is easily implemented in engineering.In addition,the AVC scheme can also resolve the poor system stability to a great extent,which is resulted from the bad static stability of missile body.
