This paper presents an optimized asymmetric three corrugation-pitch-modulated DFB laser (3CPM-DFB) with extremely high mode selectivity(△αL= 0.97) and low flatness(F = 0.009), which are two key parameters to indicat...This paper presents an optimized asymmetric three corrugation-pitch-modulated DFB laser (3CPM-DFB) with extremely high mode selectivity(△αL= 0.97) and low flatness(F = 0.009), which are two key parameters to indicate the laser’s single longitudinal mode(SLM) performance. In threshold analysis, the optimization process based on transfer matrix method is demonstrated to maximize △αL?and minimize F simultaneously. In the above-threshold regime, the evolutions of △αL?and?longitudinal distribution of photon density with injection current are evaluated. More importantly, nanoimprint lithography which was proved an efficient way to fabricate DFB gratings can provide completely same simple fabrication procedure for both 3CPM grating and conventional uniform grating. So the big practical value of 3CPM-DFB can be expected because of its advanced performance and easy manufacturability.展开更多
In this paper,a theoretical model to analyze the mode coupling induced by heat,when the fiber amplifier works at high power configuration,is proposed.The model mainly takes into consideration the mode field change due...In this paper,a theoretical model to analyze the mode coupling induced by heat,when the fiber amplifier works at high power configuration,is proposed.The model mainly takes into consideration the mode field change due to the thermally induced refractive index change and the coupling between modes.A method to predict the largest average output power of fiber is also proposed according to the mode coupling theory.The largest average output power of a large pitch fiber with a core diameter of 190 μm and an available pulse energy of 100 mJ is predicted to be 540 W,which is the highest in large mode field fibers.展开更多
A novel evaluation term and a more reasonable criterion,which is described by a new parameter of brightness factor for active large mode area fiber design,are presented.The brightness factor evaluation method is based...A novel evaluation term and a more reasonable criterion,which is described by a new parameter of brightness factor for active large mode area fiber design,are presented.The brightness factor evaluation method is based on the transverse mode competition mechanism in fiber lasers and amplifiers.The brightness factor can be seen as a description of fiber general property since it can represent the output laser brightness of the fiber laser system and because of its ability to resist the nonlinear effect.A core-doped active large pitch fiber with a core diameter of 190 μm and a mode-field diameter of180 μm is designed by this method,and the designed fiber allows effective single-mode operation.展开更多
文摘This paper presents an optimized asymmetric three corrugation-pitch-modulated DFB laser (3CPM-DFB) with extremely high mode selectivity(△αL= 0.97) and low flatness(F = 0.009), which are two key parameters to indicate the laser’s single longitudinal mode(SLM) performance. In threshold analysis, the optimization process based on transfer matrix method is demonstrated to maximize △αL?and minimize F simultaneously. In the above-threshold regime, the evolutions of △αL?and?longitudinal distribution of photon density with injection current are evaluated. More importantly, nanoimprint lithography which was proved an efficient way to fabricate DFB gratings can provide completely same simple fabrication procedure for both 3CPM grating and conventional uniform grating. So the big practical value of 3CPM-DFB can be expected because of its advanced performance and easy manufacturability.
基金supported by the National Natural Science Foundation of China(Grant No.61475081)
文摘In this paper,a theoretical model to analyze the mode coupling induced by heat,when the fiber amplifier works at high power configuration,is proposed.The model mainly takes into consideration the mode field change due to the thermally induced refractive index change and the coupling between modes.A method to predict the largest average output power of fiber is also proposed according to the mode coupling theory.The largest average output power of a large pitch fiber with a core diameter of 190 μm and an available pulse energy of 100 mJ is predicted to be 540 W,which is the highest in large mode field fibers.
基金supported by the National Natural Science Foundation of China(Grant No.61475081)
文摘A novel evaluation term and a more reasonable criterion,which is described by a new parameter of brightness factor for active large mode area fiber design,are presented.The brightness factor evaluation method is based on the transverse mode competition mechanism in fiber lasers and amplifiers.The brightness factor can be seen as a description of fiber general property since it can represent the output laser brightness of the fiber laser system and because of its ability to resist the nonlinear effect.A core-doped active large pitch fiber with a core diameter of 190 μm and a mode-field diameter of180 μm is designed by this method,and the designed fiber allows effective single-mode operation.
