Microplastics are persistent anthropogenic pollutants that have become a global concern due to their widespread distribution and unfamiliar threat to the environment and living organisms. Conventional technologies are...Microplastics are persistent anthropogenic pollutants that have become a global concern due to their widespread distribution and unfamiliar threat to the environment and living organisms. Conventional technologies are unable to fully decompose and mineralize plastic waste. Therefore, there is a need to develop an environmentally friendly, innovative and sustainable photocatalytic process that can destroy these wastes with much less energy and chemical consumption. In photocatalysis, various nanomaterials based on wide energy band gap semiconductors such as TiO2 and ZnO are used for the conversion of plastic contaminants into environmentally friendly compounds. In this work, the removal of plastic fragments by photocatalytic reactions using newly developed photocatalytic composites and the mechanism of photocatalytic degradation of microplastics are systematically investigated. In these degradation processes, sunlight or an artificial light source is used to activate the photocatalyst in the presence of oxygen.展开更多
ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis ...ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.展开更多
A series of photocatalysts of un-doped, single-doped and co-doped nanometer titanium diox- ide （TiO2） have been successfully prepared by template method using Fe（NO3）3.9H2O, La（NO3）3.6H2O, and tetrabutyl titanat...A series of photocatalysts of un-doped, single-doped and co-doped nanometer titanium diox- ide （TiO2） have been successfully prepared by template method using Fe（NO3）3.9H2O, La（NO3）3.6H2O, and tetrabutyl titanate as precursors and glucan as template. Scanning electron microscopy, X-ray diffraction, and N2 adsorption-desorption measurement were employed to characterize the morphology, crystal structure and surface structure of the samples. The photo-absorbance of the obtained catalysts was measured by UV-Vis absorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl orange in an aqueous solution. The characterizations indicated that the prepared photocatalysts consisted of anatase phase and possessed high surface area of ca. 163-176 m2/g. It was shown that the Fe and La co-doped nano-TiO2 could be activated by visible light and could thus be used as an effective catalyst in photo-oxidation reactions. The synergistic effect of Fe and La co-doping played an important role in improving the photocatalytic activity. In addition, the possibility of cyclic usage of co-doped nano-TiO2 was also confirmed, the photocatalytic activity of codoped nano-TiO2 remained above 89.6% of the fresh sample after being used four times.展开更多
Complex nanometer particles WO3/TiO2 were prepared using a sol-gel process and characterized using XRD spectra. The photocatalytic activity of TiO2 can be increased by doping W^6＋ with TiO2 because the doped W^6＋ th...Complex nanometer particles WO3/TiO2 were prepared using a sol-gel process and characterized using XRD spectra. The photocatalytic activity of TiO2 can be increased by doping W^6＋ with TiO2 because the doped W^6＋ that entered into the crystal lattices of TiO2 led to the formation of defects in the crystal lattices of TiO2 and thereby improved the photocatalytic activity of TiO2.When WO3 doped in TiO2 exceeded 3%, the excess W^6＋ did not enter into the crystal lattices of TiO2 but were uniformly dispersed in TiO2 or they covered the surface of TiO2, which reduced the effective illumination area of TiO2 and thereby lowered the photocatalytic activity of TiOE.The relationship among the composition of the catalyst, the amount of photocatalyst, the illumination time, and the decolorizing rate of methyl orange （MO） were discussed. The results show that the decolorizing rate of MO can reach 82.3% using WO3/TiO2 as the photocatalyst, with the composition of WO3/TiO2 -3：97, the mass of catalyst = 0.400 g, the initial concentration of MO = 20 mg/L, pH = 6.5, and the illumina- tion time = 7 h.展开更多
A series of Ce, H3PW12O40 co-doped TiO2 hollow fibers photocatalysts have been prepared by sol-gel method using ammonium ceric nitrate, H3PW12O40 and tetrabutyltitanate as precursors and cotton fibers as template, fol...A series of Ce, H3PW12O40 co-doped TiO2 hollow fibers photocatalysts have been prepared by sol-gel method using ammonium ceric nitrate, H3PW12O40 and tetrabutyltitanate as precursors and cotton fibers as template, followed by calcination at 500 ℃ in N2 atmosphere for 2 h. Scanning electron microscopy, X-ray diffraction, nitrogen adsorption-desorption mea- surements, and UV-Vis spectroscopy are employed to characterize the morphology, crystal structure, surface structure, and optical absorption properties of the samples. The photo- catalytic performance of the samples has been studied by photodegradation phenol in water under UV and visible light irradiation. The results show that the TiO2 fiber materials have hollow structures, and the co-doped TiO2 hollow fibers exhibit higher photocatalytic activities for the degradation of phenol than un-doped, single-doped TiO2 hollow fibers under UV and visible light. In addition, the recyclability of co-doped TiO2 fibers is also confirmed that the TiO2 fiber retains ca. 90% of its activity after being used four times. It is shown that the co-doped TiO2 fibers can be activated by visible light and may be potentially applied to the treatment of water contaminated by organic pollutants. The synergistic effect of Ce and H3PW12O40 co-doping plays an important role in improving the photocatalytic activity.展开更多
Titania（TiO2） nanorod powder was prepared by nonhydrolytic sol-gel method using titanic chloride（TiCl4） as titanium source, methylene dichloride（CH2Cl2） as solvent, absolute ethyl alcohol（CH（-3）CH2OH） as oxy...Titania（TiO2） nanorod powder was prepared by nonhydrolytic sol-gel method using titanic chloride（TiCl4） as titanium source, methylene dichloride（CH2Cl2） as solvent, absolute ethyl alcohol（CH（-3）CH2OH） as oxygen donor. The effects of Si^（4＋） doping on the TiO2 nanocrystalline phase transformation temperature were systematically researched. The results showed that when the molar ratio of Ti^（4＋） to Si^（4＋） is 1 to1.3, TiO2 prepared by calcination at 1 100 ℃ for 1 hour exhibits rod shape and has good photocatalytic activity. Doping of Si^（4＋） makes glass phase core-shell structure forming on the surface of anatase crystal particles, which can inhibit crystal phase transformation and raise the transformation temperature, making TiO2 stable in anatase phase at 1 200 ℃.展开更多
The treatment of wastewater containing bromphenol blue （BPB） by WO3/α-Fe203 was studied. Reaction mechanism of photocatalysis enhanced by photosensitizer was probed. The relationships between the composition of het...The treatment of wastewater containing bromphenol blue （BPB） by WO3/α-Fe203 was studied. Reaction mechanism of photocatalysis enhanced by photosensitizer was probed. The relationships between the composition of heterogeneous photocatalyst, the starting concentration of BPB, amount of photocatalyst, pH, amount of H2O2, illumination time and the decoloring rate of BPB were discussed. The results show that the decoloring rate of BPB can reach 99.1% by using WO3/α-FeaO3 as heterogeneous photocatalyst, with the composition of m（WO3）：m（α-Fe2O3 ）=3：1, the initial concentration of BPB = 15mg/L, the amount of catalyst = 0.300 g, pH= 6.3, the amount of H2O2 =0.2 mL, and the illumination time = 6 h.展开更多
Carbon nanotube （CNTs）/Fe-Ni/TiO2 nanocomposite photocatalysts have been synthesized by an in situ fluidized bed chemical vapor deposition （FBCVD） method. The composite photocatalysts were characterized by XRD, Ra...Carbon nanotube （CNTs）/Fe-Ni/TiO2 nanocomposite photocatalysts have been synthesized by an in situ fluidized bed chemical vapor deposition （FBCVD） method. The composite photocatalysts were characterized by XRD, Raman spectroscopy, BET, FESEM, TEM, UV-vis spectroscopy, and XPS. The results showed that the CNTs were grown in situ on the surface of TiO2. Fe（Ⅲ） in TiO2 showed no chemical changes in the growth of CNTs. Ni（Ⅱ） was partly reduced to metal Ni in the FBCVD process, and the metal Ni acted as a catalyst for the growth of CNTs. The photocatalytic activities of CNTs/Fe-Ni/TiO2 decreased with the rise of the FBCVD reaction temperature. For the sample synthesized at low FBCVD temperature （500 ℃）, more than 90% and nearly 50% of methylene blue were removed under UV irradiation in 180 min and under visible light irradiation in 300 min, respectively. The probable mechanism of synergistic enhancement of photocatalysis on the CNTs/Fe-Ni/TiO2 nanocomposite is proposed.展开更多
文摘Microplastics are persistent anthropogenic pollutants that have become a global concern due to their widespread distribution and unfamiliar threat to the environment and living organisms. Conventional technologies are unable to fully decompose and mineralize plastic waste. Therefore, there is a need to develop an environmentally friendly, innovative and sustainable photocatalytic process that can destroy these wastes with much less energy and chemical consumption. In photocatalysis, various nanomaterials based on wide energy band gap semiconductors such as TiO2 and ZnO are used for the conversion of plastic contaminants into environmentally friendly compounds. In this work, the removal of plastic fragments by photocatalytic reactions using newly developed photocatalytic composites and the mechanism of photocatalytic degradation of microplastics are systematically investigated. In these degradation processes, sunlight or an artificial light source is used to activate the photocatalyst in the presence of oxygen.
基金supported by the Natural Science Foundation of China(No.21174114)the Ministry of Education Plan for Yangtze River Scholar and Innovation Team Development(No.IRT1177)+2 种基金Scientific and Technical Plan Project of Gansu Province(No. 1204GKCA006)the Natural Science Foundation of Gansu Province (No.1010RJZA024)Scientific and Technical Innovation Project of Northwest Normal University(No.nwnu-kjcxgc-03-63)
文摘ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.
文摘A series of photocatalysts of un-doped, single-doped and co-doped nanometer titanium diox- ide （TiO2） have been successfully prepared by template method using Fe（NO3）3.9H2O, La（NO3）3.6H2O, and tetrabutyl titanate as precursors and glucan as template. Scanning electron microscopy, X-ray diffraction, and N2 adsorption-desorption measurement were employed to characterize the morphology, crystal structure and surface structure of the samples. The photo-absorbance of the obtained catalysts was measured by UV-Vis absorption spectroscopy, and the photocatalytic activities of the prepared samples under UV and visible light were estimated by measuring the degradation rate of methyl orange in an aqueous solution. The characterizations indicated that the prepared photocatalysts consisted of anatase phase and possessed high surface area of ca. 163-176 m2/g. It was shown that the Fe and La co-doped nano-TiO2 could be activated by visible light and could thus be used as an effective catalyst in photo-oxidation reactions. The synergistic effect of Fe and La co-doping played an important role in improving the photocatalytic activity. In addition, the possibility of cyclic usage of co-doped nano-TiO2 was also confirmed, the photocatalytic activity of codoped nano-TiO2 remained above 89.6% of the fresh sample after being used four times.
基金This work was financially supported by the Natural Science Foundation of Anhui Province, China (No. 050450301).
文摘Complex nanometer particles WO3/TiO2 were prepared using a sol-gel process and characterized using XRD spectra. The photocatalytic activity of TiO2 can be increased by doping W^6＋ with TiO2 because the doped W^6＋ that entered into the crystal lattices of TiO2 led to the formation of defects in the crystal lattices of TiO2 and thereby improved the photocatalytic activity of TiO2.When WO3 doped in TiO2 exceeded 3%, the excess W^6＋ did not enter into the crystal lattices of TiO2 but were uniformly dispersed in TiO2 or they covered the surface of TiO2, which reduced the effective illumination area of TiO2 and thereby lowered the photocatalytic activity of TiOE.The relationship among the composition of the catalyst, the amount of photocatalyst, the illumination time, and the decolorizing rate of methyl orange （MO） were discussed. The results show that the decolorizing rate of MO can reach 82.3% using WO3/TiO2 as the photocatalyst, with the composition of WO3/TiO2 -3：97, the mass of catalyst = 0.400 g, the initial concentration of MO = 20 mg/L, pH = 6.5, and the illumina- tion time = 7 h.
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.41373127） and Liaon- ing Provincial Natural Science Foundation of China （No.2013020121）.
文摘A series of Ce, H3PW12O40 co-doped TiO2 hollow fibers photocatalysts have been prepared by sol-gel method using ammonium ceric nitrate, H3PW12O40 and tetrabutyltitanate as precursors and cotton fibers as template, followed by calcination at 500 ℃ in N2 atmosphere for 2 h. Scanning electron microscopy, X-ray diffraction, nitrogen adsorption-desorption mea- surements, and UV-Vis spectroscopy are employed to characterize the morphology, crystal structure, surface structure, and optical absorption properties of the samples. The photo- catalytic performance of the samples has been studied by photodegradation phenol in water under UV and visible light irradiation. The results show that the TiO2 fiber materials have hollow structures, and the co-doped TiO2 hollow fibers exhibit higher photocatalytic activities for the degradation of phenol than un-doped, single-doped TiO2 hollow fibers under UV and visible light. In addition, the recyclability of co-doped TiO2 fibers is also confirmed that the TiO2 fiber retains ca. 90% of its activity after being used four times. It is shown that the co-doped TiO2 fibers can be activated by visible light and may be potentially applied to the treatment of water contaminated by organic pollutants. The synergistic effect of Ce and H3PW12O40 co-doping plays an important role in improving the photocatalytic activity.
基金Funded by the National Natural Science Foundation of China(No.51302064)
文摘Titania（TiO2） nanorod powder was prepared by nonhydrolytic sol-gel method using titanic chloride（TiCl4） as titanium source, methylene dichloride（CH2Cl2） as solvent, absolute ethyl alcohol（CH（-3）CH2OH） as oxygen donor. The effects of Si^（4＋） doping on the TiO2 nanocrystalline phase transformation temperature were systematically researched. The results showed that when the molar ratio of Ti^（4＋） to Si^（4＋） is 1 to1.3, TiO2 prepared by calcination at 1 100 ℃ for 1 hour exhibits rod shape and has good photocatalytic activity. Doping of Si^（4＋） makes glass phase core-shell structure forming on the surface of anatase crystal particles, which can inhibit crystal phase transformation and raise the transformation temperature, making TiO2 stable in anatase phase at 1 200 ℃.
基金This work is financially supported by the Natural Science Foundation of Anhui Province,China (No. 050450301)
文摘The treatment of wastewater containing bromphenol blue （BPB） by WO3/α-Fe203 was studied. Reaction mechanism of photocatalysis enhanced by photosensitizer was probed. The relationships between the composition of heterogeneous photocatalyst, the starting concentration of BPB, amount of photocatalyst, pH, amount of H2O2, illumination time and the decoloring rate of BPB were discussed. The results show that the decoloring rate of BPB can reach 99.1% by using WO3/α-FeaO3 as heterogeneous photocatalyst, with the composition of m（WO3）：m（α-Fe2O3 ）=3：1, the initial concentration of BPB = 15mg/L, the amount of catalyst = 0.300 g, pH= 6.3, the amount of H2O2 =0.2 mL, and the illumination time = 6 h.
基金supported by the Special Projects for Nanotechnology of Shanghai(1052mm02400)the National Nature Science Foundation of China(20925621)
文摘Carbon nanotube （CNTs）/Fe-Ni/TiO2 nanocomposite photocatalysts have been synthesized by an in situ fluidized bed chemical vapor deposition （FBCVD） method. The composite photocatalysts were characterized by XRD, Raman spectroscopy, BET, FESEM, TEM, UV-vis spectroscopy, and XPS. The results showed that the CNTs were grown in situ on the surface of TiO2. Fe（Ⅲ） in TiO2 showed no chemical changes in the growth of CNTs. Ni（Ⅱ） was partly reduced to metal Ni in the FBCVD process, and the metal Ni acted as a catalyst for the growth of CNTs. The photocatalytic activities of CNTs/Fe-Ni/TiO2 decreased with the rise of the FBCVD reaction temperature. For the sample synthesized at low FBCVD temperature （500 ℃）, more than 90% and nearly 50% of methylene blue were removed under UV irradiation in 180 min and under visible light irradiation in 300 min, respectively. The probable mechanism of synergistic enhancement of photocatalysis on the CNTs/Fe-Ni/TiO2 nanocomposite is proposed.
