The mass non-uniformity of hemispherical resonator is one of reasons for frequency split,and frequency split can cause gyroscope to drift.Therefore,it is of great significance to analyze the relationship between mass ...The mass non-uniformity of hemispherical resonator is one of reasons for frequency split,and frequency split can cause gyroscope to drift.Therefore,it is of great significance to analyze the relationship between mass non-uniformity and frequency split,which can provide a theoretical basis for mass balance of imperfect resonator.The starting point of error mechanism analysis for gyroscope is the motion equations of resonator.Firstly,based on the Kirchhoff-Love hypothesis in the elastic thin shell theory,the geometric deformation equations of resonator are deduced.Secondly,the deformation energy equation of resonator is derived according to the vibration mode and relationship between the stress and strain of hemispherical thin shell.Thirdly,the kinetic energy equation of resonator is deduced by the Coriolis theorem.Finally,the motion equations of resonator are established by the Lagrange mechanics principle.The theoretical values of precession factor and natural frequency are calculated by the motion equations,which are substantially consistent with the ones by the finite element method and practical measurement,the errors are within a reasonable range.Simultaneously,the varying trend of natural frequency with respect to the geometrical and physical parameters of resonator by the motion equations is consistent with that by the finite element analysis.The above conclusions prove the correctness and rationality of motion equations.Similarly,the motion equations of resonator with mass non-uniformity are established by the same modeling method in case of ignoring the input angular rate and damping,and the state equations with respect to the velocity and displacement of vibration system are derived,then twonatural frequencies are solved by the characteristic equation.It is concluded that one of reasons for frequency split is the 4 th harmonic of mass non-uniformity,and thus much attention should be paid to minimizing the 4 th harmonic of mass non-uniformity in the course of mass balancing for imperfect resonator.展开更多
We investigated the feasibility of obtaining large photoresponse in metal-semiconductor-metal(MSM) type single nanowire device where one contact can be blocking type. We showed that suitable modification of the blocki...We investigated the feasibility of obtaining large photoresponse in metal-semiconductor-metal(MSM) type single nanowire device where one contact can be blocking type. We showed that suitable modification of the blocking contact by deposition of a capping metal using focused electron beam(FEB) can lead to considerable enhancement of the photoresponse. The work was done in a single Cu:TCNQ nanowire device fabricated by direct growth of nanowires(NW) from pre-patterned Cu electrode which makes the contact ohmic with the other contact made from Au. Analysis of the data shows that the large photoresponse of the devices arises predominantly due to reduction of the barriers at the Au/NW blocking contact on illumination. This is caused by the diffusion of the photo generated carriers from the nanowires to the contact region. When the barrier height is further reduced by treating the contact with FEB deposited Pt, this results in a large enhancement in the device photoresponse.展开更多
To evaluate the influence of urban non-uniformity on precipitation, the area of a city was divided into three categories （commercial, high-density residential, and low-density residential） according to the building ...To evaluate the influence of urban non-uniformity on precipitation, the area of a city was divided into three categories （commercial, high-density residential, and low-density residential） according to the building density data from Landsat satel- lites. Numerical simulations of three corresponding scenarios （urban non-uniformity, urban uniformity, and non-urban） were performed in Nanjing using the WRF model. The results demonstrate that the existence of the city results in more precip- itation, and that urban heterogeneity enhances this phenomenon. For the urban non-uniformity, uniformity, and non-urban experiments, the mean cumulative summer precipitation was 423.09 mm, 407.40 mm, and 389.67 mm, respectively. Urban non-uniformity has a significant effect on the amount of heavy rainfall in summer. The cumulative precipitation from heavy rain in the summer for the three numerical experiments was 278.2 mm, 250.6 mm, and 236.5 mm, respectively. In the non- uniformity experiments, the amount of precipitation between 1500 and 2200 （LST） increased significantly. Furthermore, the adoption of urban non-uniformity into the WRF model could improve the numerical simulation of summer rain and its daily variation.展开更多
A high-density, high-flux circulating fluidized bed （CFB） riser （100 mm in ID and 10.614 m in height） was ap- plied in a wide range of operating conditions （with solid fluxes up to 400 kg/m2s and superficial gas ...A high-density, high-flux circulating fluidized bed （CFB） riser （100 mm in ID and 10.614 m in height） was ap- plied in a wide range of operating conditions （with solid fluxes up to 400 kg/m2s and superficial gas velocities up to 12 m/s） to examine its radial non-uniformity dynamics. The solids holdup was determined through the use of a fiber-optic probe at 11 axial levels. The results indicated that under all operating conditions, the high superficial gas velocity and low solid flux- es maintained a low radial non-uniformity index （RNI）. The high-density/flux CFB riser had several unique characteristics, so that the peak of the radial solids holdup profile occurred at a position with r/R=0.8. The RNI and solids holdup at the cross-sectional position had a good logarithmic relationship at the low-density condition （with a mean solids holdup of 〈0.2）, and the RNI decreased when the mean solids holdup exceeded 0.2. Investigation of the dynamics of stratified injec- tion revealed that the feed ratio had an important effect on G, and on solids holdup distribution. A novel ＂〈＂ shaped axial solids holdup profile was found. Gs decreased sharply when the up-flow feed ratio exceeded 0.5, and RNI was lowest when the up-flow feed ratio was 1.展开更多
Hemispherical Resonator Gyroscope(HRG)is a classical high precision Coriolis Vibration Gyroscope(CVG),which performs attitude estimation of carrier by detecting the precession of standing wave of resonator,thus,the dr...Hemispherical Resonator Gyroscope(HRG)is a classical high precision Coriolis Vibration Gyroscope(CVG),which performs attitude estimation of carrier by detecting the precession of standing wave of resonator,thus,the drift of standing wave of resonator has a great influence on the output accuracy of gyroscope,where the quality factor non-uniformity of resonator is one of main error sources.Ring electrode is a classical excitation structure of HRG because the standing wave can precess freely under its excitation,which makes the gyroscope have more accurate scale factor,larger measurement range and better dynamic characteristics.In this paper,the equations of motion of an ideal resonator excited by a ring electrode are derived by the elastic thin shell theory and Lagrange mechanical principle,then the corresponding equivalent mechanical model is established.According to the“average method”,it can be seen that the ideal resonator excited by the ring electrode works in integral mode,and any position in the circumferential direction of resonator can be a working point,which means that the quality factor non-uniformity has a great effect on the drift of standing wave.Therefore,the equations of motion of resonator with quality factor non-uniformity under the ring electrode excitation are deduced by the equivalent mechanical model,and the drift model of standing wave is established by the“average method”,it can be found that both the amplitude of quality factor non-uniformity and angle between the“inherent damping axis”and antinode axis of standing wave can affect the drift rate of standing wave.Moreover,the drift model indicates that if the input angular rate does not reach the threshold,the precession angular rate of standing wave will appear“self-locking”phenomenon,that is,the gyroscope will lose the integral effect.展开更多
Combustion chamber components （cylinder head, cylinder liner, piston assembly and oil film） are treated as a coupled body. Based on the three-dimensional numerical simulation of heat transfer of the coupled body, a ...Combustion chamber components （cylinder head, cylinder liner, piston assembly and oil film） are treated as a coupled body. Based on the three-dimensional numerical simulation of heat transfer of the coupled body, a coupled three-dimensional calculation model for the in-cylinder working process and the combustion chamber components was built with domain decomposition and boundary coupling method, in which the coupled three-dimensional simulation of in-cylindcr working process and the combustion chamber components was adopted. The simulation was applied in the influence investigation of the space non-uniformity in heat transfer among combustion chamber components on the generation of in-cylinder emissions. The results show that the space non-uniformity in heat transfer among the combustion chamber components has great influence on the generation of in-cylinder NOx emissions. The heat transfer space non-uniformity of combustion chamber components has little effect on soot formation, and far less effect on soot formation than on NOx. Under two situations of different wall temperature distributions, the soot in cylinder is different by 1.3% when exhaust valves are open.展开更多
The components of combustion chamber (cylinder head-cylinder liner-piston assembly-oil film) were taken as a coupled body.Based on the three-dimensional heat transfer numerical simulation of the coupled body,a coupled...The components of combustion chamber (cylinder head-cylinder liner-piston assembly-oil film) were taken as a coupled body.Based on the three-dimensional heat transfer numerical simulation of the coupled body,a coupled three-dimensional calculation model for in-cylinder working process and the combustion chamber components was built with domain decomposition and boundary coupled method,which implements the coupled three-dimensional simulation of in-cylinder working process and the combustion chamber components.The model was applied in the influence investigation of the space non-uniformity in heat transfer among combustion chamber components on the generation of in-cylinder emissions:NOx.The results showed that the heat transfer space non-uniformity of combustion chamber components directly influences the formation of in-cylinder NOx.The main area being influenced was the accessory area on the wall,while the influence on the generation of NOx in the central area couold be omitted.展开更多
The uncooled microbolometer has a severe temperature requirement for non-uniformity correction. An improved two-point non-uniformity correction method is proposed, which can operate in wider uniform substrate temperat...The uncooled microbolometer has a severe temperature requirement for non-uniformity correction. An improved two-point non-uniformity correction method is proposed, which can operate in wider uniform substrate temperatures. This method can control the bias voltage of MOS transistors by memory and DAC to meet two restrictions about responsivity and offset before traditional two-point calibration is implemented. The simulation results seem that this non-uniformity correction can work at uniform substrate temperature with fluctuant range of 4K.展开更多
Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failur...Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failure,the coefficient of variation(Cv)is examined and reformed in this study.We test the Cv calculation way of the"normal-abnormal"model proposed in the previous studies.Based on the analysis of the physical process of rock failure and its relationship to the shear strain field,we construct a new way to calculate the Cv value.The variation of shear strain field on rock sample with the increase of stress is obtained by the digital speckle correlation method(DSCM).The new Cv value calculation way is used to study the non-uniformity of the spatial distribution for the shear strain field.The results show that this Cv calculation way can get more obvious abnormal signals.When the number of observation points are limited,the specific distribution of points can increase the signal strength,which may provide reference for the research on precursor detection of earthquakes.展开更多
Heavy-ion-driven fusion （HIF） is a scheme to achieve inertial confinement fusion （ICF）. Investigation of the non-uniformity of heavy-ion beam （HIB） irradiation is one of the key issues for ICF driven by powerful...Heavy-ion-driven fusion （HIF） is a scheme to achieve inertial confinement fusion （ICF）. Investigation of the non-uniformity of heavy-ion beam （HIB） irradiation is one of the key issues for ICF driven by powerful heavy-ion beams. Ions in HIB impinge on the pellet surface and deposit their energy in a relatively deep and wide area. Therefore, the non-uniformity of HIB irradiation should be evaluated in the volume of the deposition area in the absorber layer. By using the OK1 code with some corrections, the non-uniformity of heavy-ion beam irradiation for the different ion beams on two kinds of targets were evaluated in 12-beam, 20-beam, 60-beam and 120-beam irradiation schemes. The root-mean-square （RMS） non-uniformity value becomes aRMS = 8.39% in an aluminum mono-layer pellet structure and aRMS = 6.53% in a lead-aluminum layer target for the 12-uranium-beam system. The RMS non-uniformity for the lead-aluminum layer target was lower than that for the mono-layer target. The RMS and peak-to-valley （PTV） non-uniformities are reduced with the increase in beam number, and low at the Bragg peak layer.展开更多
Background: Non-uniformity in signal intensity occurs commonly in magnetic resonance (MR) imaging, which may pose substantial problems when using a 3T scanner. Therefore, image non-uniformity correction is usually app...Background: Non-uniformity in signal intensity occurs commonly in magnetic resonance (MR) imaging, which may pose substantial problems when using a 3T scanner. Therefore, image non-uniformity correction is usually applied. Purpose: To compare the correction effects of the phased-array uniformity enhancement (PURE), a calibration-based image non-uniformity correction method, among three different software versions in 3T Gd-EOB-DTPA-enhanced MR imaging. Material and Methods: Hepatobiliary-phase images of a total of 120 patients who underwent Gd-EOB-DTPA-enhanced MR imaging on the same 3T scanner were analyzed retrospectively. Forty patients each were examined using three software versions (DV25, DV25.1, and DV26). The effects of PURE were compared by visual assessment, histogram analysis of liver signal intensity, evaluation of the spatial distribution of correction effects, and evaluation of quantitative indices of liver parenchymal enhancement. Results: The visual assessment indicated the highest uniformity of PURE-corrected images for DV26, followed by DV25 and DV25.1. Histogram analysis of corrected images demonstrated significantly larger variations in liver signal for DV25.1 than for the other two versions. Although PURE caused a relative increase in pixel values for central and lateral regions, such effects were weaker for DV25.1 than for the other two versions. In the evaluation of quantitative indices of liver parenchymal enhancement, the liver-to-muscle ratio (LMR) was significantly higher for the corrected images than for the uncorrected images, but the liver-to-spleen ratio (LSR) showed no significant differences. For corrected images, the LMR was significantly higher for DV25 and DV26 than for DV25.1, but the LSR showed no significant differences among the three versions. Conclusion: There were differences in the effects of PURE among the three software versions in 3T Gd-EOB-DTPA-enhanced MR imaging. Even if the non-uniformity correction method has the same brand name, correction effects may differ depending on the software version, and these differences may affect visual and quantitative evaluations.展开更多
Endowing stimuli-responsive materials with micro-nano structures is an intriguing strategy for the fabrication of superwetting surfaces;however,its application is limited by poor chemical/mechanical stability.Herein,a...Endowing stimuli-responsive materials with micro-nano structures is an intriguing strategy for the fabrication of superwetting surfaces;however,its application is limited by poor chemical/mechanical stability.Herein,a simple and versatile strategy was developed to fabricate durable polymeric superwetting surfaces with photoswitchable wettability on hierarchically structured metallic substrates.Inspired by nature,a novel functional terpolymer incorporating mussel-inspired catechol groups,photoresponsive azobenzene groups,and low-surface-energy fluorine-containing groups was synthesized via solution radical polymerization.The azobenzene-containing terpolymer possesses outstanding photoresponsiveness in both the solution and film states because of the trans-cis isomerization of the azobenzene moieties.After dip-coating with the mussel-inspired azo-copolymer,the as-prepared smart surfaces exhibited a photo-triggered change in wettability between high hydrophobicity and superhydrophilicity.More importantly,these superwetting surfaces with enhanced adhesion properties can tolerate harsh environmental conditions and repeated abrasion tests,thereby demonstrating excellent chemical robustness and mechanical durability.This study paves a new avenue for the convenient and large-scale fabrication of robust smart surfaces that could find widespread potential applications in microfluidic devices,water treatment,and functional coatings.展开更多
Face masks play a pivotal role in preventing infection transmission.However,the capture of infection-sourced particles in face masks poses challenges related to reuse,necessitating proper disposal.We developed a self-...Face masks play a pivotal role in preventing infection transmission.However,the capture of infection-sourced particles in face masks poses challenges related to reuse,necessitating proper disposal.We developed a self-sterilizable polypropylene-based membrane for face masks to address challenges associated with infection transmission prevention.The membrane,created using 3D printing,underwent functionalization with zinc oxide(ZnO)and polydopamine(PDA)-TEMPO to achieve broad-spectrum light absorption and facilitate self-sterilization through photocatalytic and photothermal effects upon light exposure.The hydrophobic surface(water contact angle:133±2°)minimized moisture accumulation,and the membrane exhibited robust mechanical properties,including shear strength(1.25±0.5kPa)and peel resistance strength(112.8±11.2kPa).The evaluation demonstrated stability in airflow(0-500cm^(3)/s)and excellent aerosol filtration efficiency(94.8±0.6%)for particles(PM 0.3,PM 2.5,PM 10),comparable to commercial masks.The membrane showed antibacterial efficacy over five uses in a simulated respiratory environment.Safety assessments confirmed biocompatibility through cytocompatibility and skin irritation assays.In conclusion,this membrane offers efficient filtration and photo-triggered sterilization,presenting a promising solution for next-generation face masks to address concerns related to reuse,disposal,and infection control.展开更多
Direct numerical simulations have been conducted to investigate the evolution process of liquid metal laminar to turbulent flow in a rectangular duct under the influence of a non-uniform magnetic field.The Reynolds nu...Direct numerical simulations have been conducted to investigate the evolution process of liquid metal laminar to turbulent flow in a rectangular duct under the influence of a non-uniform magnetic field.The Reynolds number is Re=6299,and the inlet Hartmann number is Ha=2900,with the magnetic field strength decreasing along the flow direction.The results indicate that the dynamic reversal of the three-dimensional(3D)Lorentz force direction near the inflection point of the magnetic field dominates the flow reconstruction,driving the wall jet acceleration and forming an M-type velocity distribution.Moreover,the high-speed shear layer of the jet triggers Kelvin-Helmholtz instability,resulting in the generation of secondary vortex structures near the parallel layer in the non-uniform magnetic field region.In the cross-section perpendicular to the flow direction,the secondary flow gradually evolves into a four-vortex structure,while the velocity fluctuations and turbulent kinetic energy reach the peak.Based on the characteristics of the vortex rotation direction near the shear layer,the intrinsic mechanism behind the unique bimodal distribution of the root-mean-square of velocity fluctuations in the parallel layers is revealed.Furthermore,by comparing the evolution of turbulence under different magnetic field gradients,it is revealed that the distributions of shear stress,Reynolds stress,and turbulent kinetic energy exhibit significant parameter dependence.The strong 3D magnetohydrodynamic effects at the magnetic field gradientγ=0.6 have an immediate impact on the pressure distribution.The transverse Lorentz force LFz further promotes the fluid to accumulate at the wall,leading to a significant increase in the pressure drop and transverse pressure difference in the flow.展开更多
Growth of high-quality Nb_(3)Sn thin films for superconducting radiofrequency(SRF)applications using the vapor diffusion method requires a uniform distribution of tin nuclei on the niobium(Nb)surface.This study examin...Growth of high-quality Nb_(3)Sn thin films for superconducting radiofrequency(SRF)applications using the vapor diffusion method requires a uniform distribution of tin nuclei on the niobium(Nb)surface.This study examines the mechanism underlying the observed non-uniform distribution of tin nuclei with tin chloride SnCl_(2).Electron backscatter diffraction(EBSD)analysis was used to examine the correlation between the nucleation behavior and orientation of niobium grains in the substrate.The findings of the density functional theory(DFT)simulation are in good agreement with the experimental results,showing that the non-uniform distribution of tin nuclei is the result of the adsorption energy of SnCl_(2)molecules by varied niobium grain orientations.Further analysis indicated that the surface roughness and grain size of niobium also played significant roles in the nucleation behavior.This study provides valuable insights into enhancing the surface pretreatment of niobium substrates during the growth of Nb_(3)Sn thin films using the vapor diffusion method.展开更多
To thoroughly examine the complex relationships between tire and pavement vibrations,a sophisticated vehicle-pavement coupled system is proposed,incorporating a non-uniform dynamic friction force between the tire and ...To thoroughly examine the complex relationships between tire and pavement vibrations,a sophisticated vehicle-pavement coupled system is proposed,incorporating a non-uniform dynamic friction force between the tire and the pavement.According to the Timoshenko beam theory,a dynamic model of pavement structure with a finite length beam was formulated on a nonlinear Pasternak foundation.To more accurately describe the coupling relationship between the tire and the pavement,and to take into account the vibration state under vehicle-pavement interaction,the load distribution between the tire and the pavement is modeled as a dynamic non-uniform contact.Combined with the classic LuGre tire model,the adhesion between the tire and the pavement is calculated.The Galerkin truncation method is employed to transform the pavement vibration partial differential equation into a finite ordinary differential equation,and the integral expression of the nonlinear foundation beam term is derived using the product to sum formula.By using the Runge-Kutta method,the tire-road coupled system can be numerically calculated,thus determining tire adhesion.This research demonstrates that compared with tire force under the traditional static load distribution,load distribution has a significant influence on adhesion.This study offers valuable insights for pavement structure design and vehicle performance control.展开更多
Cooling system design applicable to more than one photovoltaic(PV)unit may be challenging due to the arrangement and geometry of the modules.Different cooling techniques are provided in this study to regulate the temp...Cooling system design applicable to more than one photovoltaic(PV)unit may be challenging due to the arrangement and geometry of the modules.Different cooling techniques are provided in this study to regulate the temperature of conductive panels that are arranged perpendicular to each other.The model uses two vented cavity systems and one L-shaped channel with ternary nanofluid enhanced non-uniform magnetic field.Their cooling performances and comparative results between different systems are provided.The finite element method is used to conduct a numerical analysis for a range of values of the following:the strength of themagnetic field(Hartmann number(Ha)between 0 and 50),the inclination of the magnetic field(γbetween 0 and 90),and the loading of nanoparticles in the base fluid(ϕbetween 0 and 0.03),taking into account both uniformand non-uniformmagnetic fields.For the L-shaped channel and vented cavities,vortex size is controlled by imposing magnetic field and adjusting its strength.Whether uniform or non-uniform magnetic field is applied affects the cooling performances for different cooling configurations.Temperature drops of the horizontal panel with different magnetic field strengths by using channel cooling,vented cavity-1 and vented cavity-2 systems for uniformmagnetic are 11℃,21.5℃,and 3℃when the reference case of Ha=0 is considered for the same cooling systems.However,they become 9.5℃,13.5℃,and 12.5℃when nonuniform magnetic field is used.In the presence of uniform magnetic field effects and changing its magnitude,the use of cooling channel in vented cavity-1 and vented cavity-2 systems results in temperature drops of 4℃,10.8℃,and 3.8℃for vertical panels.On the other hand,when non-uniform magnetic field effects are present,they become 0.5℃,2.1℃,and 9℃.For L-channel cooling,the average Nu for the horizontal panel is more affected byγ,andNu rises asγrises.With increasing nanoparticle loading of ternary nanofluid,the average panel surface temperature shows a linear drop.For the horizontal panel,the temperature declines for nanofluid at the highest loading are 4℃,10℃,and 12℃as compared to using only base fluid.The values of 5℃,7℃,and 11℃are obtained for the vertical panel.Different cooling systems’performance is estimated using artificial neural networks.The method captures the combined impact of applying non-uniformmagnetic field and nanofluid together on the cooling performancewhile accounting for varied cooling strategies for both panels.展开更多
In low-light image enhancement,prevailing Retinex-based methods often struggle with precise illumina-tion estimation and brightness modulation.This can result in issues such as halo artifacts,blurred edges,and diminis...In low-light image enhancement,prevailing Retinex-based methods often struggle with precise illumina-tion estimation and brightness modulation.This can result in issues such as halo artifacts,blurred edges,and diminished details in bright regions,particularly under non-uniform illumination conditions.We propose an innovative approach that refines low-light images by leveraging an in-depth awareness of local content within the image.By introducing multi-scale effective guided filtering,our method surpasses the limitations of traditional isotropic filters,such as Gaussian filters,in handling non-uniform illumination.It dynamically adjusts regularization parameters in response to local image characteristics and significantly integrates edge perception across different scales.This balanced approach achieves a harmonious blend of smoothing and detail preservation,enabling more accurate illumination estimation.Additionally,we have designed an adaptive gamma correction function that dynamically adjusts the brightness value based on local pixel intensity,further balancing enhancement effects across different brightness levels in the image.Experimental results demonstrate the effectiveness of our proposed method for non-uniform illumination images across various scenarios.It exhibits superior quality and objective evaluation scores compared to existing methods.Our method effectively addresses potential issues that existing methods encounter when processing non-uniform illumination images,producing enhanced images with precise details and natural,vivid colors.展开更多
To investigate the influence of non-uniform water distribution on the mechanical properties and failure behavior of red sandstone,we designed five immersion heights and durations to achieve varying non-uniform water d...To investigate the influence of non-uniform water distribution on the mechanical properties and failure behavior of red sandstone,we designed five immersion heights and durations to achieve varying non-uniform water distribution states.Uniaxial compression tests were conducted on red sandstone under these conditions.The effects of non-uniform water distribution on deformation,failure,strength,and energy characteristics of red sandstone were analyzed.The impact of non-uniform water distribution on the intensity of rock failure was discussed,and the failure mechanism under non-uniform water distribution was revealed.The hazards of low immersion heights on underground rock structures were analyzed.The results demonstrate that peak strength and elastic modulus of red sandstone exhibit high sensitivity to immersion height,with reductions of 38%and 23%respectively even at L=1/50H.Water immersion reduces both energy storage capacity and energy dissipation capability of red sandstone.The immersion height and duration influence the failure mode of red sandstone by controlling the migration and separation of dry-wet interfaces.Low immersion height poses significant risks to underground rock structures(e.g.,a 38%strength reduction when L=1/50H),and the concentration degree of water non-uniform distribution is the key factor in assessing the weakening effect of water on rocks.展开更多
The intrusion of obstacles onto railway tracks presents a significant threat to train safety,characterized by sudden and unpredictable occurrences.With China leading the world in high-speed rail mileage,ensuring railw...The intrusion of obstacles onto railway tracks presents a significant threat to train safety,characterized by sudden and unpredictable occurrences.With China leading the world in high-speed rail mileage,ensuring railway security is paramount.The current laser monitoring technologies suffer from high false alarm rates and unreliable intrusion identification.This study addresses these issues by investigating high-resolution laser monitoring technology for railway obstacles,focusing on key parameters such as monitoring range and resolution.We propose an enhanced non-uniform laser scanning method,developing a laser monitoring system that reduces the obstacle false alarm rate to 2.00%,significantly lower than the 20%standard(TJ/GW135-2015).This rate is the best record for laser monitoring systems on China Railway.Our system operates seamlessly in all weather conditions,providing superior accuracy,resolution,and identification efficiency.It is the only 3D LiDAR system certified by the China State Railway Group Co.,Ltd.(Certificate No.[2023]008).Over three years,our system has been deployed at numerous points along various lines managed by the China State Railway Group,accumulating a dataset of 300,000 observations.This extensive deployment has significantly enhanced railway safety.The development and implementation of our railway laser monitoring system represent a substantial advancement in railway safety technology.Its low false alarm rate(2.00%),high accuracy(20 cm×20 cm×20 cm),and robust performance in diverse conditions underscore its potential for widespread adoption,promising to enhance railway safety in China and internationally.展开更多
基金the Pre-Research Fund during the“13th Five-Year Plan” (No. 41417060101)。
文摘The mass non-uniformity of hemispherical resonator is one of reasons for frequency split,and frequency split can cause gyroscope to drift.Therefore,it is of great significance to analyze the relationship between mass non-uniformity and frequency split,which can provide a theoretical basis for mass balance of imperfect resonator.The starting point of error mechanism analysis for gyroscope is the motion equations of resonator.Firstly,based on the Kirchhoff-Love hypothesis in the elastic thin shell theory,the geometric deformation equations of resonator are deduced.Secondly,the deformation energy equation of resonator is derived according to the vibration mode and relationship between the stress and strain of hemispherical thin shell.Thirdly,the kinetic energy equation of resonator is deduced by the Coriolis theorem.Finally,the motion equations of resonator are established by the Lagrange mechanics principle.The theoretical values of precession factor and natural frequency are calculated by the motion equations,which are substantially consistent with the ones by the finite element method and practical measurement,the errors are within a reasonable range.Simultaneously,the varying trend of natural frequency with respect to the geometrical and physical parameters of resonator by the motion equations is consistent with that by the finite element analysis.The above conclusions prove the correctness and rationality of motion equations.Similarly,the motion equations of resonator with mass non-uniformity are established by the same modeling method in case of ignoring the input angular rate and damping,and the state equations with respect to the velocity and displacement of vibration system are derived,then twonatural frequencies are solved by the characteristic equation.It is concluded that one of reasons for frequency split is the 4 th harmonic of mass non-uniformity,and thus much attention should be paid to minimizing the 4 th harmonic of mass non-uniformity in the course of mass balancing for imperfect resonator.
基金Nanomission,Department of Science and Technology,Govt. of India for financial support as sponsored project:Theme Unit of Excellence in Nanodevice Technology
文摘We investigated the feasibility of obtaining large photoresponse in metal-semiconductor-metal(MSM) type single nanowire device where one contact can be blocking type. We showed that suitable modification of the blocking contact by deposition of a capping metal using focused electron beam(FEB) can lead to considerable enhancement of the photoresponse. The work was done in a single Cu:TCNQ nanowire device fabricated by direct growth of nanowires(NW) from pre-patterned Cu electrode which makes the contact ohmic with the other contact made from Au. Analysis of the data shows that the large photoresponse of the devices arises predominantly due to reduction of the barriers at the Au/NW blocking contact on illumination. This is caused by the diffusion of the photo generated carriers from the nanowires to the contact region. When the barrier height is further reduced by treating the contact with FEB deposited Pt, this results in a large enhancement in the device photoresponse.
基金supported by the National Basic Research Program of China(Program 973)(Grant Nos.2010CB428501 and 2014CB441203)the National Natural Science Foundation of China(Grant No.41575141)
文摘To evaluate the influence of urban non-uniformity on precipitation, the area of a city was divided into three categories （commercial, high-density residential, and low-density residential） according to the building density data from Landsat satel- lites. Numerical simulations of three corresponding scenarios （urban non-uniformity, urban uniformity, and non-urban） were performed in Nanjing using the WRF model. The results demonstrate that the existence of the city results in more precip- itation, and that urban heterogeneity enhances this phenomenon. For the urban non-uniformity, uniformity, and non-urban experiments, the mean cumulative summer precipitation was 423.09 mm, 407.40 mm, and 389.67 mm, respectively. Urban non-uniformity has a significant effect on the amount of heavy rainfall in summer. The cumulative precipitation from heavy rain in the summer for the three numerical experiments was 278.2 mm, 250.6 mm, and 236.5 mm, respectively. In the non- uniformity experiments, the amount of precipitation between 1500 and 2200 （LST） increased significantly. Furthermore, the adoption of urban non-uniformity into the WRF model could improve the numerical simulation of summer rain and its daily variation.
基金the financial support of the National Program on Key Basic Research Project (973 Program) of China (no. 2012CB215000)
文摘A high-density, high-flux circulating fluidized bed （CFB） riser （100 mm in ID and 10.614 m in height） was ap- plied in a wide range of operating conditions （with solid fluxes up to 400 kg/m2s and superficial gas velocities up to 12 m/s） to examine its radial non-uniformity dynamics. The solids holdup was determined through the use of a fiber-optic probe at 11 axial levels. The results indicated that under all operating conditions, the high superficial gas velocity and low solid flux- es maintained a low radial non-uniformity index （RNI）. The high-density/flux CFB riser had several unique characteristics, so that the peak of the radial solids holdup profile occurred at a position with r/R=0.8. The RNI and solids holdup at the cross-sectional position had a good logarithmic relationship at the low-density condition （with a mean solids holdup of 〈0.2）, and the RNI decreased when the mean solids holdup exceeded 0.2. Investigation of the dynamics of stratified injec- tion revealed that the feed ratio had an important effect on G, and on solids holdup distribution. A novel ＂〈＂ shaped axial solids holdup profile was found. Gs decreased sharply when the up-flow feed ratio exceeded 0.5, and RNI was lowest when the up-flow feed ratio was 1.
文摘Hemispherical Resonator Gyroscope(HRG)is a classical high precision Coriolis Vibration Gyroscope(CVG),which performs attitude estimation of carrier by detecting the precession of standing wave of resonator,thus,the drift of standing wave of resonator has a great influence on the output accuracy of gyroscope,where the quality factor non-uniformity of resonator is one of main error sources.Ring electrode is a classical excitation structure of HRG because the standing wave can precess freely under its excitation,which makes the gyroscope have more accurate scale factor,larger measurement range and better dynamic characteristics.In this paper,the equations of motion of an ideal resonator excited by a ring electrode are derived by the elastic thin shell theory and Lagrange mechanical principle,then the corresponding equivalent mechanical model is established.According to the“average method”,it can be seen that the ideal resonator excited by the ring electrode works in integral mode,and any position in the circumferential direction of resonator can be a working point,which means that the quality factor non-uniformity has a great effect on the drift of standing wave.Therefore,the equations of motion of resonator with quality factor non-uniformity under the ring electrode excitation are deduced by the equivalent mechanical model,and the drift model of standing wave is established by the“average method”,it can be found that both the amplitude of quality factor non-uniformity and angle between the“inherent damping axis”and antinode axis of standing wave can affect the drift rate of standing wave.Moreover,the drift model indicates that if the input angular rate does not reach the threshold,the precession angular rate of standing wave will appear“self-locking”phenomenon,that is,the gyroscope will lose the integral effect.
基金Projects(50576008,50876016,51006015) supported by the National Natural Science Foundation of ChinaProject(20062180) supported by the Natural Science Foundation of Liaoning Province, ChinaProject(20100470070) supported by China Postdoctoral Science Foundation
文摘Combustion chamber components （cylinder head, cylinder liner, piston assembly and oil film） are treated as a coupled body. Based on the three-dimensional numerical simulation of heat transfer of the coupled body, a coupled three-dimensional calculation model for the in-cylinder working process and the combustion chamber components was built with domain decomposition and boundary coupling method, in which the coupled three-dimensional simulation of in-cylindcr working process and the combustion chamber components was adopted. The simulation was applied in the influence investigation of the space non-uniformity in heat transfer among combustion chamber components on the generation of in-cylinder emissions. The results show that the space non-uniformity in heat transfer among the combustion chamber components has great influence on the generation of in-cylinder NOx emissions. The heat transfer space non-uniformity of combustion chamber components has little effect on soot formation, and far less effect on soot formation than on NOx. Under two situations of different wall temperature distributions, the soot in cylinder is different by 1.3% when exhaust valves are open.
基金Sponsored by the National Natural Science Foundation of China (Grant No. 50576008,50876016,and 51006015)
文摘The components of combustion chamber (cylinder head-cylinder liner-piston assembly-oil film) were taken as a coupled body.Based on the three-dimensional heat transfer numerical simulation of the coupled body,a coupled three-dimensional calculation model for in-cylinder working process and the combustion chamber components was built with domain decomposition and boundary coupled method,which implements the coupled three-dimensional simulation of in-cylinder working process and the combustion chamber components.The model was applied in the influence investigation of the space non-uniformity in heat transfer among combustion chamber components on the generation of in-cylinder emissions:NOx.The results showed that the heat transfer space non-uniformity of combustion chamber components directly influences the formation of in-cylinder NOx.The main area being influenced was the accessory area on the wall,while the influence on the generation of NOx in the central area couold be omitted.
文摘The uncooled microbolometer has a severe temperature requirement for non-uniformity correction. An improved two-point non-uniformity correction method is proposed, which can operate in wider uniform substrate temperatures. This method can control the bias voltage of MOS transistors by memory and DAC to meet two restrictions about responsivity and offset before traditional two-point calibration is implemented. The simulation results seem that this non-uniformity correction can work at uniform substrate temperature with fluctuant range of 4K.
基金jointly supported by the China Postdoctoral Science Foundation(No.2018M630028)the National Natural Science Foundation of China(Nos.41274094,40821062 and 40872133).
文摘Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failure,the coefficient of variation(Cv)is examined and reformed in this study.We test the Cv calculation way of the"normal-abnormal"model proposed in the previous studies.Based on the analysis of the physical process of rock failure and its relationship to the shear strain field,we construct a new way to calculate the Cv value.The variation of shear strain field on rock sample with the increase of stress is obtained by the digital speckle correlation method(DSCM).The new Cv value calculation way is used to study the non-uniformity of the spatial distribution for the shear strain field.The results show that this Cv calculation way can get more obvious abnormal signals.When the number of observation points are limited,the specific distribution of points can increase the signal strength,which may provide reference for the research on precursor detection of earthquakes.
文摘Heavy-ion-driven fusion （HIF） is a scheme to achieve inertial confinement fusion （ICF）. Investigation of the non-uniformity of heavy-ion beam （HIB） irradiation is one of the key issues for ICF driven by powerful heavy-ion beams. Ions in HIB impinge on the pellet surface and deposit their energy in a relatively deep and wide area. Therefore, the non-uniformity of HIB irradiation should be evaluated in the volume of the deposition area in the absorber layer. By using the OK1 code with some corrections, the non-uniformity of heavy-ion beam irradiation for the different ion beams on two kinds of targets were evaluated in 12-beam, 20-beam, 60-beam and 120-beam irradiation schemes. The root-mean-square （RMS） non-uniformity value becomes aRMS = 8.39% in an aluminum mono-layer pellet structure and aRMS = 6.53% in a lead-aluminum layer target for the 12-uranium-beam system. The RMS non-uniformity for the lead-aluminum layer target was lower than that for the mono-layer target. The RMS and peak-to-valley （PTV） non-uniformities are reduced with the increase in beam number, and low at the Bragg peak layer.
文摘Background: Non-uniformity in signal intensity occurs commonly in magnetic resonance (MR) imaging, which may pose substantial problems when using a 3T scanner. Therefore, image non-uniformity correction is usually applied. Purpose: To compare the correction effects of the phased-array uniformity enhancement (PURE), a calibration-based image non-uniformity correction method, among three different software versions in 3T Gd-EOB-DTPA-enhanced MR imaging. Material and Methods: Hepatobiliary-phase images of a total of 120 patients who underwent Gd-EOB-DTPA-enhanced MR imaging on the same 3T scanner were analyzed retrospectively. Forty patients each were examined using three software versions (DV25, DV25.1, and DV26). The effects of PURE were compared by visual assessment, histogram analysis of liver signal intensity, evaluation of the spatial distribution of correction effects, and evaluation of quantitative indices of liver parenchymal enhancement. Results: The visual assessment indicated the highest uniformity of PURE-corrected images for DV26, followed by DV25 and DV25.1. Histogram analysis of corrected images demonstrated significantly larger variations in liver signal for DV25.1 than for the other two versions. Although PURE caused a relative increase in pixel values for central and lateral regions, such effects were weaker for DV25.1 than for the other two versions. In the evaluation of quantitative indices of liver parenchymal enhancement, the liver-to-muscle ratio (LMR) was significantly higher for the corrected images than for the uncorrected images, but the liver-to-spleen ratio (LSR) showed no significant differences. For corrected images, the LMR was significantly higher for DV25 and DV26 than for DV25.1, but the LSR showed no significant differences among the three versions. Conclusion: There were differences in the effects of PURE among the three software versions in 3T Gd-EOB-DTPA-enhanced MR imaging. Even if the non-uniformity correction method has the same brand name, correction effects may differ depending on the software version, and these differences may affect visual and quantitative evaluations.
基金supported by the Natural Science Foundation of Shandong Province(No.ZR2022MB034)the Development Program Project of the Young Innovation Team of Institutions of Higher Learning in Shandong Province。
文摘Endowing stimuli-responsive materials with micro-nano structures is an intriguing strategy for the fabrication of superwetting surfaces;however,its application is limited by poor chemical/mechanical stability.Herein,a simple and versatile strategy was developed to fabricate durable polymeric superwetting surfaces with photoswitchable wettability on hierarchically structured metallic substrates.Inspired by nature,a novel functional terpolymer incorporating mussel-inspired catechol groups,photoresponsive azobenzene groups,and low-surface-energy fluorine-containing groups was synthesized via solution radical polymerization.The azobenzene-containing terpolymer possesses outstanding photoresponsiveness in both the solution and film states because of the trans-cis isomerization of the azobenzene moieties.After dip-coating with the mussel-inspired azo-copolymer,the as-prepared smart surfaces exhibited a photo-triggered change in wettability between high hydrophobicity and superhydrophilicity.More importantly,these superwetting surfaces with enhanced adhesion properties can tolerate harsh environmental conditions and repeated abrasion tests,thereby demonstrating excellent chemical robustness and mechanical durability.This study paves a new avenue for the convenient and large-scale fabrication of robust smart surfaces that could find widespread potential applications in microfluidic devices,water treatment,and functional coatings.
基金supported by Key Scientific Research Projects of Colleges and Universities in Henan Province(No.23ZX016)University Innovation Research and Training Program(No.202110467004)the Distinguished Professor Program of Institutions of Higher Learning in Henan Province,National Key R&D Program of China(No.2019YFE0101200).
文摘Face masks play a pivotal role in preventing infection transmission.However,the capture of infection-sourced particles in face masks poses challenges related to reuse,necessitating proper disposal.We developed a self-sterilizable polypropylene-based membrane for face masks to address challenges associated with infection transmission prevention.The membrane,created using 3D printing,underwent functionalization with zinc oxide(ZnO)and polydopamine(PDA)-TEMPO to achieve broad-spectrum light absorption and facilitate self-sterilization through photocatalytic and photothermal effects upon light exposure.The hydrophobic surface(water contact angle:133±2°)minimized moisture accumulation,and the membrane exhibited robust mechanical properties,including shear strength(1.25±0.5kPa)and peel resistance strength(112.8±11.2kPa).The evaluation demonstrated stability in airflow(0-500cm^(3)/s)and excellent aerosol filtration efficiency(94.8±0.6%)for particles(PM 0.3,PM 2.5,PM 10),comparable to commercial masks.The membrane showed antibacterial efficacy over five uses in a simulated respiratory environment.Safety assessments confirmed biocompatibility through cytocompatibility and skin irritation assays.In conclusion,this membrane offers efficient filtration and photo-triggered sterilization,presenting a promising solution for next-generation face masks to address concerns related to reuse,disposal,and infection control.
基金supported by the Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-087)and the National Key R&D Program of China(Grant No.2022YFA1204100)。
文摘Direct numerical simulations have been conducted to investigate the evolution process of liquid metal laminar to turbulent flow in a rectangular duct under the influence of a non-uniform magnetic field.The Reynolds number is Re=6299,and the inlet Hartmann number is Ha=2900,with the magnetic field strength decreasing along the flow direction.The results indicate that the dynamic reversal of the three-dimensional(3D)Lorentz force direction near the inflection point of the magnetic field dominates the flow reconstruction,driving the wall jet acceleration and forming an M-type velocity distribution.Moreover,the high-speed shear layer of the jet triggers Kelvin-Helmholtz instability,resulting in the generation of secondary vortex structures near the parallel layer in the non-uniform magnetic field region.In the cross-section perpendicular to the flow direction,the secondary flow gradually evolves into a four-vortex structure,while the velocity fluctuations and turbulent kinetic energy reach the peak.Based on the characteristics of the vortex rotation direction near the shear layer,the intrinsic mechanism behind the unique bimodal distribution of the root-mean-square of velocity fluctuations in the parallel layers is revealed.Furthermore,by comparing the evolution of turbulence under different magnetic field gradients,it is revealed that the distributions of shear stress,Reynolds stress,and turbulent kinetic energy exhibit significant parameter dependence.The strong 3D magnetohydrodynamic effects at the magnetic field gradientγ=0.6 have an immediate impact on the pressure distribution.The transverse Lorentz force LFz further promotes the fluid to accumulate at the wall,leading to a significant increase in the pressure drop and transverse pressure difference in the flow.
基金supported by the National Natural Science Foundation of China(No.12175283)Youth Innovation Promotion Association of Chinese Academy of Sciences(2020410)Advanced Energy Science and Technology Guangdong Laboratory(HND20TDSPCD,HND22PTDZD).
文摘Growth of high-quality Nb_(3)Sn thin films for superconducting radiofrequency(SRF)applications using the vapor diffusion method requires a uniform distribution of tin nuclei on the niobium(Nb)surface.This study examines the mechanism underlying the observed non-uniform distribution of tin nuclei with tin chloride SnCl_(2).Electron backscatter diffraction(EBSD)analysis was used to examine the correlation between the nucleation behavior and orientation of niobium grains in the substrate.The findings of the density functional theory(DFT)simulation are in good agreement with the experimental results,showing that the non-uniform distribution of tin nuclei is the result of the adsorption energy of SnCl_(2)molecules by varied niobium grain orientations.Further analysis indicated that the surface roughness and grain size of niobium also played significant roles in the nucleation behavior.This study provides valuable insights into enhancing the surface pretreatment of niobium substrates during the growth of Nb_(3)Sn thin films using the vapor diffusion method.
基金financially supported by the National Natural Science Foundation of China(Grant No.12072204).
文摘To thoroughly examine the complex relationships between tire and pavement vibrations,a sophisticated vehicle-pavement coupled system is proposed,incorporating a non-uniform dynamic friction force between the tire and the pavement.According to the Timoshenko beam theory,a dynamic model of pavement structure with a finite length beam was formulated on a nonlinear Pasternak foundation.To more accurately describe the coupling relationship between the tire and the pavement,and to take into account the vibration state under vehicle-pavement interaction,the load distribution between the tire and the pavement is modeled as a dynamic non-uniform contact.Combined with the classic LuGre tire model,the adhesion between the tire and the pavement is calculated.The Galerkin truncation method is employed to transform the pavement vibration partial differential equation into a finite ordinary differential equation,and the integral expression of the nonlinear foundation beam term is derived using the product to sum formula.By using the Runge-Kutta method,the tire-road coupled system can be numerically calculated,thus determining tire adhesion.This research demonstrates that compared with tire force under the traditional static load distribution,load distribution has a significant influence on adhesion.This study offers valuable insights for pavement structure design and vehicle performance control.
基金funded by the Deanship of Scientific Research and Libraries,Princess Nourah bint Abdulrahman University,through the Program of Research Project Funding after Publication,grant No.(RPFAP-88-1445).
文摘Cooling system design applicable to more than one photovoltaic(PV)unit may be challenging due to the arrangement and geometry of the modules.Different cooling techniques are provided in this study to regulate the temperature of conductive panels that are arranged perpendicular to each other.The model uses two vented cavity systems and one L-shaped channel with ternary nanofluid enhanced non-uniform magnetic field.Their cooling performances and comparative results between different systems are provided.The finite element method is used to conduct a numerical analysis for a range of values of the following:the strength of themagnetic field(Hartmann number(Ha)between 0 and 50),the inclination of the magnetic field(γbetween 0 and 90),and the loading of nanoparticles in the base fluid(ϕbetween 0 and 0.03),taking into account both uniformand non-uniformmagnetic fields.For the L-shaped channel and vented cavities,vortex size is controlled by imposing magnetic field and adjusting its strength.Whether uniform or non-uniform magnetic field is applied affects the cooling performances for different cooling configurations.Temperature drops of the horizontal panel with different magnetic field strengths by using channel cooling,vented cavity-1 and vented cavity-2 systems for uniformmagnetic are 11℃,21.5℃,and 3℃when the reference case of Ha=0 is considered for the same cooling systems.However,they become 9.5℃,13.5℃,and 12.5℃when nonuniform magnetic field is used.In the presence of uniform magnetic field effects and changing its magnitude,the use of cooling channel in vented cavity-1 and vented cavity-2 systems results in temperature drops of 4℃,10.8℃,and 3.8℃for vertical panels.On the other hand,when non-uniform magnetic field effects are present,they become 0.5℃,2.1℃,and 9℃.For L-channel cooling,the average Nu for the horizontal panel is more affected byγ,andNu rises asγrises.With increasing nanoparticle loading of ternary nanofluid,the average panel surface temperature shows a linear drop.For the horizontal panel,the temperature declines for nanofluid at the highest loading are 4℃,10℃,and 12℃as compared to using only base fluid.The values of 5℃,7℃,and 11℃are obtained for the vertical panel.Different cooling systems’performance is estimated using artificial neural networks.The method captures the combined impact of applying non-uniformmagnetic field and nanofluid together on the cooling performancewhile accounting for varied cooling strategies for both panels.
文摘In low-light image enhancement,prevailing Retinex-based methods often struggle with precise illumina-tion estimation and brightness modulation.This can result in issues such as halo artifacts,blurred edges,and diminished details in bright regions,particularly under non-uniform illumination conditions.We propose an innovative approach that refines low-light images by leveraging an in-depth awareness of local content within the image.By introducing multi-scale effective guided filtering,our method surpasses the limitations of traditional isotropic filters,such as Gaussian filters,in handling non-uniform illumination.It dynamically adjusts regularization parameters in response to local image characteristics and significantly integrates edge perception across different scales.This balanced approach achieves a harmonious blend of smoothing and detail preservation,enabling more accurate illumination estimation.Additionally,we have designed an adaptive gamma correction function that dynamically adjusts the brightness value based on local pixel intensity,further balancing enhancement effects across different brightness levels in the image.Experimental results demonstrate the effectiveness of our proposed method for non-uniform illumination images across various scenarios.It exhibits superior quality and objective evaluation scores compared to existing methods.Our method effectively addresses potential issues that existing methods encounter when processing non-uniform illumination images,producing enhanced images with precise details and natural,vivid colors.
基金supported by the National Natural Science Foundation of China(Nos.52474133,52304227,52304091,and 52374095)the Natural Science Foundation of Hunan Province(Nos.2025JJ50316 and 2023JJ40548).
文摘To investigate the influence of non-uniform water distribution on the mechanical properties and failure behavior of red sandstone,we designed five immersion heights and durations to achieve varying non-uniform water distribution states.Uniaxial compression tests were conducted on red sandstone under these conditions.The effects of non-uniform water distribution on deformation,failure,strength,and energy characteristics of red sandstone were analyzed.The impact of non-uniform water distribution on the intensity of rock failure was discussed,and the failure mechanism under non-uniform water distribution was revealed.The hazards of low immersion heights on underground rock structures were analyzed.The results demonstrate that peak strength and elastic modulus of red sandstone exhibit high sensitivity to immersion height,with reductions of 38%and 23%respectively even at L=1/50H.Water immersion reduces both energy storage capacity and energy dissipation capability of red sandstone.The immersion height and duration influence the failure mode of red sandstone by controlling the migration and separation of dry-wet interfaces.Low immersion height poses significant risks to underground rock structures(e.g.,a 38%strength reduction when L=1/50H),and the concentration degree of water non-uniform distribution is the key factor in assessing the weakening effect of water on rocks.
基金financially supported by the National Natural Science Foundation of China(Nos.62275244,62375258,62225507,U2033211,62175230,and 62175232)the CAS Project for Young Scientists in Basic Research(No.YSBR-065)+2 种基金Scientific Instrument Developing Project of the Chinese Academy of Sciences(No.YJKYYQ20200001)National Key R&D Program of China(No.2022YFB3607800,No.2022YFB3605800,and No.2022YFB4601501)Key Program of the Chinese Academy of Sciences(ZDBS-ZRKJZ-TLC018)。
文摘The intrusion of obstacles onto railway tracks presents a significant threat to train safety,characterized by sudden and unpredictable occurrences.With China leading the world in high-speed rail mileage,ensuring railway security is paramount.The current laser monitoring technologies suffer from high false alarm rates and unreliable intrusion identification.This study addresses these issues by investigating high-resolution laser monitoring technology for railway obstacles,focusing on key parameters such as monitoring range and resolution.We propose an enhanced non-uniform laser scanning method,developing a laser monitoring system that reduces the obstacle false alarm rate to 2.00%,significantly lower than the 20%standard(TJ/GW135-2015).This rate is the best record for laser monitoring systems on China Railway.Our system operates seamlessly in all weather conditions,providing superior accuracy,resolution,and identification efficiency.It is the only 3D LiDAR system certified by the China State Railway Group Co.,Ltd.(Certificate No.[2023]008).Over three years,our system has been deployed at numerous points along various lines managed by the China State Railway Group,accumulating a dataset of 300,000 observations.This extensive deployment has significantly enhanced railway safety.The development and implementation of our railway laser monitoring system represent a substantial advancement in railway safety technology.Its low false alarm rate(2.00%),high accuracy(20 cm×20 cm×20 cm),and robust performance in diverse conditions underscore its potential for widespread adoption,promising to enhance railway safety in China and internationally.
