Lamellar globularization in the dual-phase titanium alloy is the key to improving plasticity and strength.However,the mechanism has not been fully elucidated so far.In this work,the role of phase/grain bound-ary in th...Lamellar globularization in the dual-phase titanium alloy is the key to improving plasticity and strength.However,the mechanism has not been fully elucidated so far.In this work,the role of phase/grain bound-ary in the static globularization of TC17 alloy was systematically studied by setting differentαphase con-tent before annealing through low-and high-temperature deformation.Isothermal compression causes the parallel distribution and fragmentation of 3Dαplates and few globularαparticles are formed at a strain rate of 1 s^(-1).Post-deformation annealing promotes the static globularization ofαphase while it is affected by initialαphase content.After 730°C deformation,the development ofα/αinterface by absorbing dislocations promotes the formation of globularαgrains based on the nucleation of sepa-ratedαparticles and pre-recoveryαsubgrain during subsequent annealing.Theα/α/βandα/β/βtriple junctions formed due to highαcontent with about 36%volume fraction are favorable for the further nucleation and growth of globularαgrains by reducing interface energy,forming a 3D irregularαplate.Then nucleation and growth of theβphase dominate the microstructure evolution during subsequent an-nealing,resulting in the local dissolution of the plate and formation ofαrods.After 850°C deformation,theαphase tends to nucleate at theβ/β/βtriple junctions and grow into a lamellar shape along the high energyβ/βgrain boundary due to lowαcontent with about 7%volume fraction.Theαnucleation that maintains the Burgers orientation relationship(BOR)with the surroundingβphase grows along the habit plane and thickens slowly,resulting in the formation of a precipitatedαplate with a flat surface and the suppression of static globularization.The comprehensive investigation of lamellar globularization provides guidance for optimizing the 3D microstructure and properties of dual-phase titanium alloy.展开更多
It is well known that coarse-grained super-elastic NiTi shape memory alloys(SMAs)exhibit localized rather than homogeneous martensite transformation(MT),which,however,can be strongly influenced by either internal size...It is well known that coarse-grained super-elastic NiTi shape memory alloys(SMAs)exhibit localized rather than homogeneous martensite transformation(MT),which,however,can be strongly influenced by either internal size(grain size,GS)or the external size(geometric size).The coupled effect of GS and geometric size on the functional properties has not been clearly understood yet.In this work,the super-elasticity,one-way,and stress-assisted two-way shape memory effects of the polycrystalline NiTi SMAs with different aspect ratios(length/width for the gauge section)and different GSs are investigated based on the phase field method.The coupled effect of the aspect ratio and GS on the functional properties is adequately revealed.The simulated results indicate that when the aspect ratio is lower than about 4:1,the stress biaxiality and stress heterogeneity in the gauge section of the sample become more and more obvious with decreasing the aspect ratio,which can significantly influence the microstructure evolution in the process involving external stress.Therefore,the corresponding functional property is strongly dependent on the aspect ratio.With decreasing the GS and the aspect ratio(to be lower than 4:1),both the aspect ratio and GS can affect the MT or martensite reorientation in each grain and the interaction among grains.Thus,due to the strong internal constraint(i.e.,the constraint of grain boundary)and the external constraint(i.e.,the constraint of geometric boundary),the capabilities of the functional properties of NiTi SMAs are gradually weakened and highly dependent on these two factors.展开更多
LiNiO_(2)(LNO)is one of the most promising cathode materials for lithium-ion batteries.Tungsten element in enhancing the stability of LNO has been researched extensively.However,the understanding of the specific dopin...LiNiO_(2)(LNO)is one of the most promising cathode materials for lithium-ion batteries.Tungsten element in enhancing the stability of LNO has been researched extensively.However,the understanding of the specific doping process and existing form of W are still not perfect.This study proposes a lithium-induced grain boundary phase W doping mechanism.The results demonstrate that the introduced W atomsfirst react with the lithium source to generate a Li–W–O phase at the grain boundary of primary particles.With the increase of lithium ratio,W atoms gradually diffuse from the grain boundary phase to the interior layered structure to achieve W doping.The feasibility of grain boundary phase doping is verified byfirst principles calculation.Furthermore,it is found that the Li2WO4 grain boundary phase is an excellent lithium ion conductor,which can protect the cathode surface and improve the rate performance.The doped W can alleviate the harmful H2↔H3 phase transition,thereby inhibiting the generation of microcracks,and improving the electrochemical performance.Consequently,the 0.3 wt%W-doped sample provides a significant improved capacity retention of 88.5%compared with the pristine LNO(80.7%)after 100 cycles at 2.8–4.3 V under 1C.展开更多
The grain boundary diffusion process(GBDP)has proven to be an effective method for enhancing the coercivity of sintered Nd-Fe-B magnets.However,the limited diffusion depth and thicker shell struc-ture have impeded the...The grain boundary diffusion process(GBDP)has proven to be an effective method for enhancing the coercivity of sintered Nd-Fe-B magnets.However,the limited diffusion depth and thicker shell struc-ture have impeded the further development of magnetic properties.Currently,the primary debates re-garding the mechanism of GBDP with Tb revolve around the dissolution-solidification mechanism and the atomic substitution mechanism.To clarify this mechanism,the microstructure evolution of sintered Nd-Fe-B magnets during the heating process of GBDP has been systematically studied by quenching at different tem peratures.In this study,it was found that the formation of TbFe_(2) phase is related to the dis-solution of _(2)Fe_(14)B grains during GBDP with Tb.The theory of mixing heat and phase separation further confirms that the Nd_(2)Fe_(14)B phase dissolves to form a mixed phase of Nd and TbFe_(2),which then solidifies into the(Nd,Tb)_(2)Fe_(14)B phase.Based on the discovery of the TbFe_(2) phase,the dissolution-solidification mechanism is considered the primary mechanism for GBDP.This is supported by the elemental content of the two typical core-shell structures observed.展开更多
The combination of dual-main-phase(DMP)(Nd,Ce)-Fe-B magnets and grain boundary diffusion process(GBDP)is currently a research topic for obtaining high-cost performance materials in rare earth permanent magnet fields.T...The combination of dual-main-phase(DMP)(Nd,Ce)-Fe-B magnets and grain boundary diffusion process(GBDP)is currently a research topic for obtaining high-cost performance materials in rare earth permanent magnet fields.The novel structural features of GBDP(Nd,Ce)-Fe-B magnets give a version of different domain reversal processes from those of non-diffused magnets.In this work,the in-situ magnetic domain evolution of the DMP magnets was observed at elevated temperatures,and the temperature demagnetization and coercivity mechanism of the GBDP dual-main-phase(Nd,Ce)-Fe-B magnets are discussed.The results show that the shell composition of different types of grains in DMP magnets is similar,while the magnetic microstructure results indicate the Ce-rich grains tend to demagnetize first.Dy-rich shell with a high anisotropic field caused by GBDP leads to an increase in the nucleation field,which enhances the coercivity.It is found that much more grains exhibit single domain characteristics in the remanent state for GBDP dual-main-phase(Nd,Ce)-Fe-B magnets.In addition,the grains that undergo demagnetization first are Ce-rich or Nd-rich grains,which is different from that of non-diffused magnets.These results were not found in previous studies but can be intuitively characterized from the perspective of magnetic domains in this work,providing a new perspective and understanding of the performance improvement of magnetic materials.展开更多
The rapid development of magnetic materials provides the possibility for the application of permanent magnet stirring(PMS).Numerical and experimental investigations were employed with respect to the solidification pro...The rapid development of magnetic materials provides the possibility for the application of permanent magnet stirring(PMS).Numerical and experimental investigations were employed with respect to the solidification process of the Al—2Sc alloy controlled by a novel PMS using NdFeB permanent magnets under various rotation speeds(0,50,100 and 150 r/min).The simulated results reveal that the maximum electromagnetic force increases proportionally from 4.14 to 12.39 kN/m^(3)and the maximum tangential velocity increases from 0.13 to 0.36 m/s when the rotation speed of PMS enhances from 50 to 150 r/min in the ingot melt.Besides,the experimental results demonstrate that PMS can achieve a uniform distribution of blocky Al_(3)Sc precipitated phase in the longitudinal direction under the impact of a forced fluid flow.Moreover,increasing rotation speed of PMS is beneficial to refining aluminum grain size significantly and decreasing the texture intensity in the alloy.In addition,the Brinell hardness of Al-2Sc alloy is increased by 33%to 27.8 HB and the tensile strength is enhanced by 34%-128.2 MPa,due to the improved distribution of the strengthening Al_(3)SC phase and the grain refinement of Al matrix under the impact of PMS.This work provides an effective application of NdFeB permanent magnets in the metal cast field.展开更多
Inferior grains exhibit delayed developmental processes and reduced metabolic activities compared to superior grains,leading to unstable rice yield and quality.While significant advancements have been achieved in eluc...Inferior grains exhibit delayed developmental processes and reduced metabolic activities compared to superior grains,leading to unstable rice yield and quality.While significant advancements have been achieved in elucidating the physiology of endosperm filling in inferior grains,the role of the embryo remains underexplored and warrants comprehensive investigation.Two Wuyujing 3 mutants,DW024(relatively synchronous;syn-DW024)and DW179(significantly asynchronous;asyn-DW179),with different grain-filling patterns were used in this study.Samples of superior and inferior grains were collected at intervals from 5 to 60 d after fertilization and subsequently dissected into subsamples of the embryo and endosperm.Histochemical staining,biochemical analysis,and RNA sequencing(RNA-seq)were combined to systematically compare developmental and physiological traits between superior and inferior grains.Combining hierarchical clustering of mRNA datasets revealed three developmental phases of the endosperm and embryo:morphogenesis,endosperm filling/embryo enlargement,and maturation.In both syn-DW024 and asyn-DW179,the duration of the endosperm/embryo morphogenesis phase was identical in superior and inferior grains.The inferior grains of asyn-DW179 exhibited a 10-day prolongation in the endosperm filling phase and a 20-day extension in the embryo enlargement phase compared to the superior grains.The endosperm of inferior grains exhibited higher contents of sugars and free amino acids,along with slower accumulation of storage compounds,which was associated with the down-regulation of genes for starch synthesis and ABA signaling.In addition,transporters for nutrient exchanges between endosperm and embryo were down-regulated,suggesting a potential role of the embryo in adjusting the endosperm filling process.Collectively,our results reveal that the prolonged phases of endosperm filling and embryo enlargement may underlie the impaired development of inferior grains,offering a new perspective for breeding or cultivating rice with uniform grain quality.展开更多
SmFe_(12)-based alloys perform promising potential for new generation permanent magnets,attributed to their high saturation magnetization(Ms)and anisotropy field(Ha).Introduction of the low melting point element Cu ca...SmFe_(12)-based alloys perform promising potential for new generation permanent magnets,attributed to their high saturation magnetization(Ms)and anisotropy field(Ha).Introduction of the low melting point element Cu can promote the formation of non-magnetic grain boundaries in Sm-Fe-Ti system.The effect of Cu content on the grain boundary phase formation and magnetic properties in Sm(Fe_(0.8)Co_(0.2))_(11-x)TiCu_(x)(x=0-0.5)strips has been investigated.Sm(Fe_(0.8)Co_(0.2))_(10.8)TiCu_(0.2) strip exhibited a maximum Ms value of 1.07 T.Coercivity improved from 20.96 kA m^(-1) for Sm(Fe_(0.8)Co_(0.2))_(11)Ti strip to 165.92 kA m^(-1) for Sm(Fe_(0.8)Co_(0.2))_(10.5)TiCu_(0.5) strip.When Cu content increased from 0 to 0.5 at.%,Fe content of the grain boundary phase decreased from 43.8 to 12.6 at.%.Due to the good wettability of Cu,main 1:12 phase is well isolated and enveloped by(Sm,Cu)-rich grain boundary phase.Cu addition facilitates the formation of the continuous non-magnetic grain boundaries and reduces grain size of main 1:12 phase,contributing to coercivity improvement of the strips.展开更多
In-situ tensile tests were conducted on a chemically corroded third-generation single-crystal superalloy DD9 at 980 and 1100℃.The phase transformation in the surface areas during the tensile process was analyzed usin...In-situ tensile tests were conducted on a chemically corroded third-generation single-crystal superalloy DD9 at 980 and 1100℃.The phase transformation in the surface areas during the tensile process was analyzed using field emission scanning electron microscope,energy dispersive X-ray spectroscope,electron probe X-ray microanalysis,and transmission electron microscope.The phase transformation mechanism on the surface and the influence mechanism were studied through observation and dynamic calculation.During tensile tests at elevated temperatures,chemical corrosion promotes the precipitation of topologically close-packed(tcp)μphase andσphase on the alloy surface.Both the precipitation amount and size of these two phases on the surface at 1100℃are greater than those at 980℃.The precipitation of tcp phase on the alloy surface results in the formation of an influence layer on the surface area,and the distribution characteristics of alloying elements are significantly different from those of the substrate.The depth of the influence layer at 1100℃is greater than that at 980℃.The precipitation of tcp phase prompts the phase transition fromγphase toγ′phase around the tcp phase.展开更多
Mechanism of discontinuous precipitation(DP) in AZ80 alloy was investigated by phase-orientation correlated characterization.The results show DPs nucleate by turning the original grain boundaries(GBs) as reaction fron...Mechanism of discontinuous precipitation(DP) in AZ80 alloy was investigated by phase-orientation correlated characterization.The results show DPs nucleate by turning the original grain boundaries(GBs) as reaction front(RF),and further driving the RF to realize their growth.The DPs regions retained the same orientations as their parent grains.The misorientation angle and rotation axis of RFs had strong influence on DPs nucleation.The low-angle GBs,twin boundaries(TBs) and the GBs with specific misorientation axis which are known as low energy and low mobility GBs can hardly initiate DPs.In addition,the TBs had a strong ability to inhibit the growth of DPs,but it should be noticed that the growth of DPs cannot be totally inhibited by TBs.DPs can engulf the twins when the growth direction is approximately parallel to the long axis of TBs.The inhibition behavior is related to the distribution of Al solute atoms near the RF,boundary interactions of the TBs and twin tips with the RF,and the morphology of the continuous precipitations within the twins.展开更多
A sintered Nd-Y-Fe-B magnet was designed and manufactured by the multi-main-phase process.Unevenly distributed Y in the magnet decreases the adverse magnetic weakening effect of Y on the coercivity.Grain boundary diff...A sintered Nd-Y-Fe-B magnet was designed and manufactured by the multi-main-phase process.Unevenly distributed Y in the magnet decreases the adverse magnetic weakening effect of Y on the coercivity.Grain boundary diffusion process(GBDP)was conducted to further enhance the coercivity of the Nd-Y-Fe-B magnet.The coercivity increases significantly from 884 to 1741 kA/m after GBDP with Pr_(60)Tb_(10)Cu_(30)alloy.The mechanism of the coercivity enhancement is discussed based on the microstructure analysis.Micromagnetic simulation reveals that when the diffused Tb-rich shell thickness is lower than 12 nm the c-plane shell(perpendicular to the c-axis)is much more effective in enhancing the coercivity than the side plane shell(parallel to the c-axis).But when the Tb-rich shell thickness is above12 nm the side plane shell contributes more to the coercivity enhancement.The results in this work can help to design and manufacture Nd-Fe-B magnets with low cost and high magnetic properties.展开更多
The spray-deposition was used to produce billets of Mg-4Al-1.5Zn-3Ca-1Nd(A alloy)and Mg-13Al-3Zn-3Ca-1Nd(B alloy),and evolution of deformation substructure and Mg_(x)Zn_(y)Ca_(z)metastable phase in fine-grained(3μm)M...The spray-deposition was used to produce billets of Mg-4Al-1.5Zn-3Ca-1Nd(A alloy)and Mg-13Al-3Zn-3Ca-1Nd(B alloy),and evolution of deformation substructure and Mg_(x)Zn_(y)Ca_(z)metastable phase in fine-grained(3μm)Mg alloys was investigated by scanning electron microscopy(SEM),transmission electron microscopy(TEM),X-ray diffraction(XRD),and electron backscattered diffraction(EBSD).It was found that different dislocation configurations were formed in A and B alloys.Redundant free dislocations(RFDs)and dislocation tangles were the ways to form deformation substructure in A alloy,no RFDs except dislocation tangles were found in B alloy.The interaction between nano-scale second phase particles(nano-scale C15 andβ-Mg_(17)(Al,Zn)_(12)phase)and different dislocation configurations had a significant effect on the deformation substructures formation.The mass transfer of Mg_(x)Zn_(y)Ca_(z)metastable phases and the stacking order of stacking faults were conducive to the Mg-Nd-Zn typed long period stacking ordered(LPSO)phases formation.Nano-scale C15 phases,Mg-Nd-Zn typed LPSO phases,c/a ratio,β-Mg_(17)(Al,Zn)_(12)phases were the key factors influencing the formation of textures.Different textures and grain boundary features(GB features)had a significant effect on k-value.The non-basal textures were the main factor affecting k-value in A alloy,while the high-angle grain boundary(HAGB)was the main factor affecting k-value in B alloy.展开更多
The effect of trace addition of 0.1wt%Y on the grain refinement and mechanical properties of Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys at as-cast and heat-treated states was investigated.Results show that the additi...The effect of trace addition of 0.1wt%Y on the grain refinement and mechanical properties of Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys at as-cast and heat-treated states was investigated.Results show that the addition of 0.1wt%Y into the Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys can elevate the nucleation temperature of the Al_(3)(Sc,Zr)phase,leading to the preferential precipitation of the Al_(3)(Sc,Zr)phase and increasing the amount of Al_(3)(Sc,Zr)phase in the matrix.Al_(3)(Sc,Zr)phase can also act as a heterogeneous nucleation site in theα-Al matrix to promote nucleation and refine grains.The addition of element Y changes the precipitation phase characteristics at the grain boundaries in the as-cast alloy,which changes the distribution characteristics of secondary phases from initially continuous and coarse strip-like distribution at grain boundaries into the discontinuous dot-like and rod-like distribution.Besides,the size of secondary phases becomes smaller and their amount increases.Under the combined effects of grain refinement strengthening and precipitation strengthening,the Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc-0.1Y alloy after 175℃/10 h aging treatment achieves an ultimate tensile strength of 412 MPa and an elongation of 6.3%.Compared with those of the alloy without Y addition,the ultimate tensile strength and elongation of the added alloy increase by 16.1%and 53.7%,respectively.展开更多
The water-quenched(WQ)2195 Al−Li alloy was subjected to stretching at different temperatures,from room temperature(RT)to−196℃(CT),to investigate the effect of cryogenic deformation on the aging precipitation behavior...The water-quenched(WQ)2195 Al−Li alloy was subjected to stretching at different temperatures,from room temperature(RT)to−196℃(CT),to investigate the effect of cryogenic deformation on the aging precipitation behaviors and mechanical properties.The precipitation kinetics of the T1 phase and the microstructures in peak aging state were investigated through the differential scanning calorimetric(DSC)tests and electron microscopy observation.The results show that−196℃deformation produces a high dislocation density,which promotes the precipitation of the T1 phase and refines its sizes significantly.In addition,the grain boundary precipitates(GBPs)of−196℃-stretched samples are suppressed considerably due to the high dislocation density in the grain interiors,which increases the ductility.In comparison,the strength remains nearly constant.Thus,it is indicated that cryogenic forming has the potential to provide the shape and property control for the manufacture of critical components of aluminum alloys.展开更多
[Background]High harmonic cavities are widely used in electron storage rings to lengthen thebunch,lower the bunch peak current,thereby reducing the IBS effect,enhancing the Touschek lifetime,as well asproviding Landau...[Background]High harmonic cavities are widely used in electron storage rings to lengthen thebunch,lower the bunch peak current,thereby reducing the IBS effect,enhancing the Touschek lifetime,as well asproviding Landau damping,which is particularly important for storage rings operating with ultra-low emittance or atlow beam energy.[Purpose]To further increase the bunch length without additional hardware costs,the phasemodulation in a dual-RF system is considered.[Methods]In this paper,turn-by-turn simulations incorporating randomsynchrotron radiation excitation are conducted,and a brief analysis is presented to explain the bunch lengtheningmechanism.[Results]Simulation results reveal that the peak current can be further reduced,thereby mitigating IBSeffects and enhancing the Touschek lifetime.Although the energy spread increases,which tends to reduce thebrightness of higher-harmonic radiation from the undulator,the brightness of the fundamental harmonic can,in fact,beimproved.展开更多
A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5w...A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.展开更多
Highlights OsCAX2 is localized to tonoplast,and cadmium induces its expression.OsCAX2 overexpression reduces cadmium concentration in indica rice grains by 49.1%.Cadmium(Cd)exposure poses significant health risks to h...Highlights OsCAX2 is localized to tonoplast,and cadmium induces its expression.OsCAX2 overexpression reduces cadmium concentration in indica rice grains by 49.1%.Cadmium(Cd)exposure poses significant health risks to humans,and the International Agency for Research on Cancer has classified it as a Group I carcinogen.Cadmium undergoes minimal metabolism in the human body;consequently,prolonged Cd^(2+)exposure can cause severe damage to multiple organs including the liver,kidneys,lungs,bones,and immune system(Shao et al.2024).Rice,one of the three global staple crops,and Cd exposure in humans primarily occurs the consumption of contaminated rice grains.The contribution of rice to the total dietary Cd intake is over 50% for non-smoking Asian populations(Chen et al.2018;Shi et al.2020).展开更多
A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However...A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However,current studies primarily focus on short-term grain provision services while neglecting the spatiotemporal variations in grain flows across different scales.This gap limits the identification of dynamic matching relationships and the formulation of optimization strategies for balancing grain flows.This study examined the spatiotemporal evolution of grain supply and demand in the Beijing-Tianjin-Hebei(BTH)region from 1980 to 2020.Using the Enhanced TwoStep Floating Catchment Area method,the grain provision ecosystem service flows were quantified,the changes in supply–demand matching under different grain flow scenarios were analyzed and the optimal distance threshold for grain flows was investigated.The results revealed that grain production follows a spatial distribution pattern characterized by high levels in the southeast and low levels in the northwest.A significant mismatch exists between supply and demand,and it shows a scale effect.Deficit areas are mainly concentrated in the northwest,while surplus areas are mainly located in the central and southern regions.As the spatial scale increases,the ecosystem service supply–demand ratio(SDR)classification becomes more clustered,while it exhibits greater spatial SDR heterogeneity at smaller scales.This study examined two distinct scenarios of grain provision ecosystem service flow dynamics based on 100 and 200 km distance thresholds.The flow increased significantly,from 2.17 to 11.81million tons in the first scenario and from 2.41 to 12.37 million tons in the second scenario over nearly 40 years,forming a spatial movement pattern from the central and southern regions to the surrounding areas.Large flows were mainly concentrated in the interior of urban centers,with significant outflows between cities such as Baoding,Shijiazhuang,Xingtai,and Hengshui.At the county scale,supply–demand matching patterns remained consistent between the grain flows in the two scenarios.Notably,incorporating grain flow dynamics significantly reduced the number of grain-deficit areas compared to scenarios without grain flow.In 2020,grain-deficit counties decreased by28.79 and 37.88%,and cities by 12.50 and 25.0%under the two scenarios,respectively.Furthermore,the distance threshold for achieving optimal supply and demand matching at the county scale was longer than at the city scale in both grain flow scenarios.This study provides valuable insights into the dynamic relationships and heterogeneous patterns of grain matching,and expands the research perspective on grain and ecosystem service flows across various spatiotemporal scales.展开更多
CR Dhan 310(CRD310),a biofortified rice variety,contains a significantly higher level of grain protein compared with its recurrent parent Naveen(NV),as well as most adapted high-yielding rice varieties in India.Althou...CR Dhan 310(CRD310),a biofortified rice variety,contains a significantly higher level of grain protein compared with its recurrent parent Naveen(NV),as well as most adapted high-yielding rice varieties in India.Although a limited investigation depicted that CRD310 contained higher levels of glutelin and some essential amino acids,detailed biochemical,molecular,and cellular mechanisms remain to be studied.As one of the means to identify the proteins and understand the underlying mechanism of higher proteins accumulation in grains of CRD310,the comparative proteomics was undertaken on grains of CRD310 and NV at the yellow ripening stage.展开更多
基金the financial support from the National Key R&D Program of China(Grant No.2022YFB3707201)the Science Fund for Distinguished Young Scholars from Shaanxi Province(No.2020JC-17)+2 种基金NPU AoXiang Distinguished Young Schol-ars(Grant Nos.0604022GH0202143,0604022SH0201143)the Funding of Young Top-notch Talent of the National Ten Thousand Talent Program,the Fundamental Research Funds for the Central Universities(No.3102022gxb004)Science Center for Gas Tur-bine Project(No.P2022-A-IV-001-002)。
文摘Lamellar globularization in the dual-phase titanium alloy is the key to improving plasticity and strength.However,the mechanism has not been fully elucidated so far.In this work,the role of phase/grain bound-ary in the static globularization of TC17 alloy was systematically studied by setting differentαphase con-tent before annealing through low-and high-temperature deformation.Isothermal compression causes the parallel distribution and fragmentation of 3Dαplates and few globularαparticles are formed at a strain rate of 1 s^(-1).Post-deformation annealing promotes the static globularization ofαphase while it is affected by initialαphase content.After 730°C deformation,the development ofα/αinterface by absorbing dislocations promotes the formation of globularαgrains based on the nucleation of sepa-ratedαparticles and pre-recoveryαsubgrain during subsequent annealing.Theα/α/βandα/β/βtriple junctions formed due to highαcontent with about 36%volume fraction are favorable for the further nucleation and growth of globularαgrains by reducing interface energy,forming a 3D irregularαplate.Then nucleation and growth of theβphase dominate the microstructure evolution during subsequent an-nealing,resulting in the local dissolution of the plate and formation ofαrods.After 850°C deformation,theαphase tends to nucleate at theβ/β/βtriple junctions and grow into a lamellar shape along the high energyβ/βgrain boundary due to lowαcontent with about 7%volume fraction.Theαnucleation that maintains the Burgers orientation relationship(BOR)with the surroundingβphase grows along the habit plane and thickens slowly,resulting in the formation of a precipitatedαplate with a flat surface and the suppression of static globularization.The comprehensive investigation of lamellar globularization provides guidance for optimizing the 3D microstructure and properties of dual-phase titanium alloy.
基金supported by the National Natural Science Foundation of China (Grant Nos.12202294 and 12022208)the Project funded by China Postdoctoral Science Foundation (Grant No.2022M712243)the Fundamental Research Funds for the Central Universities (Grant No.2023SCU12098).
文摘It is well known that coarse-grained super-elastic NiTi shape memory alloys(SMAs)exhibit localized rather than homogeneous martensite transformation(MT),which,however,can be strongly influenced by either internal size(grain size,GS)or the external size(geometric size).The coupled effect of GS and geometric size on the functional properties has not been clearly understood yet.In this work,the super-elasticity,one-way,and stress-assisted two-way shape memory effects of the polycrystalline NiTi SMAs with different aspect ratios(length/width for the gauge section)and different GSs are investigated based on the phase field method.The coupled effect of the aspect ratio and GS on the functional properties is adequately revealed.The simulated results indicate that when the aspect ratio is lower than about 4:1,the stress biaxiality and stress heterogeneity in the gauge section of the sample become more and more obvious with decreasing the aspect ratio,which can significantly influence the microstructure evolution in the process involving external stress.Therefore,the corresponding functional property is strongly dependent on the aspect ratio.With decreasing the GS and the aspect ratio(to be lower than 4:1),both the aspect ratio and GS can affect the MT or martensite reorientation in each grain and the interaction among grains.Thus,due to the strong internal constraint(i.e.,the constraint of grain boundary)and the external constraint(i.e.,the constraint of geometric boundary),the capabilities of the functional properties of NiTi SMAs are gradually weakened and highly dependent on these two factors.
基金supported by the National Natural Science Foundation of China(No.52122407,No.52174285,52404317)the Science and Technology Innovation Program of Hunan Province(No.2022RC3048).
文摘LiNiO_(2)(LNO)is one of the most promising cathode materials for lithium-ion batteries.Tungsten element in enhancing the stability of LNO has been researched extensively.However,the understanding of the specific doping process and existing form of W are still not perfect.This study proposes a lithium-induced grain boundary phase W doping mechanism.The results demonstrate that the introduced W atomsfirst react with the lithium source to generate a Li–W–O phase at the grain boundary of primary particles.With the increase of lithium ratio,W atoms gradually diffuse from the grain boundary phase to the interior layered structure to achieve W doping.The feasibility of grain boundary phase doping is verified byfirst principles calculation.Furthermore,it is found that the Li2WO4 grain boundary phase is an excellent lithium ion conductor,which can protect the cathode surface and improve the rate performance.The doped W can alleviate the harmful H2↔H3 phase transition,thereby inhibiting the generation of microcracks,and improving the electrochemical performance.Consequently,the 0.3 wt%W-doped sample provides a significant improved capacity retention of 88.5%compared with the pristine LNO(80.7%)after 100 cycles at 2.8–4.3 V under 1C.
基金supported by the National Key Research and Development Program of China(2022YFB3505503)the National Natural Science Foundation of China(52201230)+2 种基金the Key R&D Program of Shandong Province(2022CXGC020307)the China Postdoctoral Science Foundation(2022M71204)the Beijing NOVA Program(Z211100002121092).
文摘The grain boundary diffusion process(GBDP)has proven to be an effective method for enhancing the coercivity of sintered Nd-Fe-B magnets.However,the limited diffusion depth and thicker shell struc-ture have impeded the further development of magnetic properties.Currently,the primary debates re-garding the mechanism of GBDP with Tb revolve around the dissolution-solidification mechanism and the atomic substitution mechanism.To clarify this mechanism,the microstructure evolution of sintered Nd-Fe-B magnets during the heating process of GBDP has been systematically studied by quenching at different tem peratures.In this study,it was found that the formation of TbFe_(2) phase is related to the dis-solution of _(2)Fe_(14)B grains during GBDP with Tb.The theory of mixing heat and phase separation further confirms that the Nd_(2)Fe_(14)B phase dissolves to form a mixed phase of Nd and TbFe_(2),which then solidifies into the(Nd,Tb)_(2)Fe_(14)B phase.Based on the discovery of the TbFe_(2) phase,the dissolution-solidification mechanism is considered the primary mechanism for GBDP.This is supported by the elemental content of the two typical core-shell structures observed.
基金supported by the National Key Research and Development Program of China(Nos.2021YFB3503003,2021YFB3503100,and 2022YFB3505401).
文摘The combination of dual-main-phase(DMP)(Nd,Ce)-Fe-B magnets and grain boundary diffusion process(GBDP)is currently a research topic for obtaining high-cost performance materials in rare earth permanent magnet fields.The novel structural features of GBDP(Nd,Ce)-Fe-B magnets give a version of different domain reversal processes from those of non-diffused magnets.In this work,the in-situ magnetic domain evolution of the DMP magnets was observed at elevated temperatures,and the temperature demagnetization and coercivity mechanism of the GBDP dual-main-phase(Nd,Ce)-Fe-B magnets are discussed.The results show that the shell composition of different types of grains in DMP magnets is similar,while the magnetic microstructure results indicate the Ce-rich grains tend to demagnetize first.Dy-rich shell with a high anisotropic field caused by GBDP leads to an increase in the nucleation field,which enhances the coercivity.It is found that much more grains exhibit single domain characteristics in the remanent state for GBDP dual-main-phase(Nd,Ce)-Fe-B magnets.In addition,the grains that undergo demagnetization first are Ce-rich or Nd-rich grains,which is different from that of non-diffused magnets.These results were not found in previous studies but can be intuitively characterized from the perspective of magnetic domains in this work,providing a new perspective and understanding of the performance improvement of magnetic materials.
基金Project supported by the Natural Science Foundation of Hunan Province(2024JJ4056)the Key Project of Guangxi Zhuang Autonomous Region(AB22080089)the Government of Chongzuo,Guangxi Zhuang Autonomous Region(FA20210716)。
文摘The rapid development of magnetic materials provides the possibility for the application of permanent magnet stirring(PMS).Numerical and experimental investigations were employed with respect to the solidification process of the Al—2Sc alloy controlled by a novel PMS using NdFeB permanent magnets under various rotation speeds(0,50,100 and 150 r/min).The simulated results reveal that the maximum electromagnetic force increases proportionally from 4.14 to 12.39 kN/m^(3)and the maximum tangential velocity increases from 0.13 to 0.36 m/s when the rotation speed of PMS enhances from 50 to 150 r/min in the ingot melt.Besides,the experimental results demonstrate that PMS can achieve a uniform distribution of blocky Al_(3)Sc precipitated phase in the longitudinal direction under the impact of a forced fluid flow.Moreover,increasing rotation speed of PMS is beneficial to refining aluminum grain size significantly and decreasing the texture intensity in the alloy.In addition,the Brinell hardness of Al-2Sc alloy is increased by 33%to 27.8 HB and the tensile strength is enhanced by 34%-128.2 MPa,due to the improved distribution of the strengthening Al_(3)SC phase and the grain refinement of Al matrix under the impact of PMS.This work provides an effective application of NdFeB permanent magnets in the metal cast field.
基金supported by the National Key Research and Development Program of China(2022YFD2300700)the National Natural Science Foundation of China(32201894)+1 种基金Hainan Provincial Natural Science Foundation of China(323QN193)Rothamsted Research receives strategic funding from the Biotechnological and Biological Sciences Research Council of the UK.Matthew J.Paul acknowledges funding from the Delivering Sustainable Wheat(BB/X011003/1)Strategic Program.
文摘Inferior grains exhibit delayed developmental processes and reduced metabolic activities compared to superior grains,leading to unstable rice yield and quality.While significant advancements have been achieved in elucidating the physiology of endosperm filling in inferior grains,the role of the embryo remains underexplored and warrants comprehensive investigation.Two Wuyujing 3 mutants,DW024(relatively synchronous;syn-DW024)and DW179(significantly asynchronous;asyn-DW179),with different grain-filling patterns were used in this study.Samples of superior and inferior grains were collected at intervals from 5 to 60 d after fertilization and subsequently dissected into subsamples of the embryo and endosperm.Histochemical staining,biochemical analysis,and RNA sequencing(RNA-seq)were combined to systematically compare developmental and physiological traits between superior and inferior grains.Combining hierarchical clustering of mRNA datasets revealed three developmental phases of the endosperm and embryo:morphogenesis,endosperm filling/embryo enlargement,and maturation.In both syn-DW024 and asyn-DW179,the duration of the endosperm/embryo morphogenesis phase was identical in superior and inferior grains.The inferior grains of asyn-DW179 exhibited a 10-day prolongation in the endosperm filling phase and a 20-day extension in the embryo enlargement phase compared to the superior grains.The endosperm of inferior grains exhibited higher contents of sugars and free amino acids,along with slower accumulation of storage compounds,which was associated with the down-regulation of genes for starch synthesis and ABA signaling.In addition,transporters for nutrient exchanges between endosperm and embryo were down-regulated,suggesting a potential role of the embryo in adjusting the endosperm filling process.Collectively,our results reveal that the prolonged phases of endosperm filling and embryo enlargement may underlie the impaired development of inferior grains,offering a new perspective for breeding or cultivating rice with uniform grain quality.
文摘SmFe_(12)-based alloys perform promising potential for new generation permanent magnets,attributed to their high saturation magnetization(Ms)and anisotropy field(Ha).Introduction of the low melting point element Cu can promote the formation of non-magnetic grain boundaries in Sm-Fe-Ti system.The effect of Cu content on the grain boundary phase formation and magnetic properties in Sm(Fe_(0.8)Co_(0.2))_(11-x)TiCu_(x)(x=0-0.5)strips has been investigated.Sm(Fe_(0.8)Co_(0.2))_(10.8)TiCu_(0.2) strip exhibited a maximum Ms value of 1.07 T.Coercivity improved from 20.96 kA m^(-1) for Sm(Fe_(0.8)Co_(0.2))_(11)Ti strip to 165.92 kA m^(-1) for Sm(Fe_(0.8)Co_(0.2))_(10.5)TiCu_(0.5) strip.When Cu content increased from 0 to 0.5 at.%,Fe content of the grain boundary phase decreased from 43.8 to 12.6 at.%.Due to the good wettability of Cu,main 1:12 phase is well isolated and enveloped by(Sm,Cu)-rich grain boundary phase.Cu addition facilitates the formation of the continuous non-magnetic grain boundaries and reduces grain size of main 1:12 phase,contributing to coercivity improvement of the strips.
文摘In-situ tensile tests were conducted on a chemically corroded third-generation single-crystal superalloy DD9 at 980 and 1100℃.The phase transformation in the surface areas during the tensile process was analyzed using field emission scanning electron microscope,energy dispersive X-ray spectroscope,electron probe X-ray microanalysis,and transmission electron microscope.The phase transformation mechanism on the surface and the influence mechanism were studied through observation and dynamic calculation.During tensile tests at elevated temperatures,chemical corrosion promotes the precipitation of topologically close-packed(tcp)μphase andσphase on the alloy surface.Both the precipitation amount and size of these two phases on the surface at 1100℃are greater than those at 980℃.The precipitation of tcp phase on the alloy surface results in the formation of an influence layer on the surface area,and the distribution characteristics of alloying elements are significantly different from those of the substrate.The depth of the influence layer at 1100℃is greater than that at 980℃.The precipitation of tcp phase prompts the phase transition fromγphase toγ′phase around the tcp phase.
基金supported by National Natural Science Foundation of China (52201107)Research Program of Chongqing Municipal Education Commission (KJQN202201151)Natural Science Foundation of Chongqing (CSTB2023NSCQ-MSX0067).
文摘Mechanism of discontinuous precipitation(DP) in AZ80 alloy was investigated by phase-orientation correlated characterization.The results show DPs nucleate by turning the original grain boundaries(GBs) as reaction front(RF),and further driving the RF to realize their growth.The DPs regions retained the same orientations as their parent grains.The misorientation angle and rotation axis of RFs had strong influence on DPs nucleation.The low-angle GBs,twin boundaries(TBs) and the GBs with specific misorientation axis which are known as low energy and low mobility GBs can hardly initiate DPs.In addition,the TBs had a strong ability to inhibit the growth of DPs,but it should be noticed that the growth of DPs cannot be totally inhibited by TBs.DPs can engulf the twins when the growth direction is approximately parallel to the long axis of TBs.The inhibition behavior is related to the distribution of Al solute atoms near the RF,boundary interactions of the TBs and twin tips with the RF,and the morphology of the continuous precipitations within the twins.
基金Project supported by the National Natural Science Foundation of China(51901087)China Postdoctoral Science Foundation(2021M701504)。
文摘A sintered Nd-Y-Fe-B magnet was designed and manufactured by the multi-main-phase process.Unevenly distributed Y in the magnet decreases the adverse magnetic weakening effect of Y on the coercivity.Grain boundary diffusion process(GBDP)was conducted to further enhance the coercivity of the Nd-Y-Fe-B magnet.The coercivity increases significantly from 884 to 1741 kA/m after GBDP with Pr_(60)Tb_(10)Cu_(30)alloy.The mechanism of the coercivity enhancement is discussed based on the microstructure analysis.Micromagnetic simulation reveals that when the diffused Tb-rich shell thickness is lower than 12 nm the c-plane shell(perpendicular to the c-axis)is much more effective in enhancing the coercivity than the side plane shell(parallel to the c-axis).But when the Tb-rich shell thickness is above12 nm the side plane shell contributes more to the coercivity enhancement.The results in this work can help to design and manufacture Nd-Fe-B magnets with low cost and high magnetic properties.
基金financial support by the National Natural Science Foundation of China(No.51364032)the Inner Mongolia Natural Science Foundation(No.2022MS05028)。
文摘The spray-deposition was used to produce billets of Mg-4Al-1.5Zn-3Ca-1Nd(A alloy)and Mg-13Al-3Zn-3Ca-1Nd(B alloy),and evolution of deformation substructure and Mg_(x)Zn_(y)Ca_(z)metastable phase in fine-grained(3μm)Mg alloys was investigated by scanning electron microscopy(SEM),transmission electron microscopy(TEM),X-ray diffraction(XRD),and electron backscattered diffraction(EBSD).It was found that different dislocation configurations were formed in A and B alloys.Redundant free dislocations(RFDs)and dislocation tangles were the ways to form deformation substructure in A alloy,no RFDs except dislocation tangles were found in B alloy.The interaction between nano-scale second phase particles(nano-scale C15 andβ-Mg_(17)(Al,Zn)_(12)phase)and different dislocation configurations had a significant effect on the deformation substructures formation.The mass transfer of Mg_(x)Zn_(y)Ca_(z)metastable phases and the stacking order of stacking faults were conducive to the Mg-Nd-Zn typed long period stacking ordered(LPSO)phases formation.Nano-scale C15 phases,Mg-Nd-Zn typed LPSO phases,c/a ratio,β-Mg_(17)(Al,Zn)_(12)phases were the key factors influencing the formation of textures.Different textures and grain boundary features(GB features)had a significant effect on k-value.The non-basal textures were the main factor affecting k-value in A alloy,while the high-angle grain boundary(HAGB)was the main factor affecting k-value in B alloy.
基金National Natural Science Foundation of China(52071065)Fundamental Research Funds for the Central Universities(N2007007)+2 种基金Joint Fund of Henan Province Science and Technology R&D Program(N225200810040)High-Level Talent Research Start-Up Project Funding of Henan Academy of Sciences(N242017003)Liaoning Provincial Department of Education Basic Research Projects for Colleges and Universities(LJ212410142093)。
文摘The effect of trace addition of 0.1wt%Y on the grain refinement and mechanical properties of Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys at as-cast and heat-treated states was investigated.Results show that the addition of 0.1wt%Y into the Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc alloys can elevate the nucleation temperature of the Al_(3)(Sc,Zr)phase,leading to the preferential precipitation of the Al_(3)(Sc,Zr)phase and increasing the amount of Al_(3)(Sc,Zr)phase in the matrix.Al_(3)(Sc,Zr)phase can also act as a heterogeneous nucleation site in theα-Al matrix to promote nucleation and refine grains.The addition of element Y changes the precipitation phase characteristics at the grain boundaries in the as-cast alloy,which changes the distribution characteristics of secondary phases from initially continuous and coarse strip-like distribution at grain boundaries into the discontinuous dot-like and rod-like distribution.Besides,the size of secondary phases becomes smaller and their amount increases.Under the combined effects of grain refinement strengthening and precipitation strengthening,the Al-2.2Li-1.5Cu-0.5Mg-1Zn-0.2Zr-0.2Sc-0.1Y alloy after 175℃/10 h aging treatment achieves an ultimate tensile strength of 412 MPa and an elongation of 6.3%.Compared with those of the alloy without Y addition,the ultimate tensile strength and elongation of the added alloy increase by 16.1%and 53.7%,respectively.
基金financially supported by the National Key Research and Development Program of China (No. 2019YFA0708801)the National Natural Science Foundation of China (No. 51875125)。
文摘The water-quenched(WQ)2195 Al−Li alloy was subjected to stretching at different temperatures,from room temperature(RT)to−196℃(CT),to investigate the effect of cryogenic deformation on the aging precipitation behaviors and mechanical properties.The precipitation kinetics of the T1 phase and the microstructures in peak aging state were investigated through the differential scanning calorimetric(DSC)tests and electron microscopy observation.The results show that−196℃deformation produces a high dislocation density,which promotes the precipitation of the T1 phase and refines its sizes significantly.In addition,the grain boundary precipitates(GBPs)of−196℃-stretched samples are suppressed considerably due to the high dislocation density in the grain interiors,which increases the ductility.In comparison,the strength remains nearly constant.Thus,it is indicated that cryogenic forming has the potential to provide the shape and property control for the manufacture of critical components of aluminum alloys.
基金National Natural Science Foundation of China(12405168)The Fundamental Research Funds for the Central Universities,China(2024CDJXY004)。
文摘[Background]High harmonic cavities are widely used in electron storage rings to lengthen thebunch,lower the bunch peak current,thereby reducing the IBS effect,enhancing the Touschek lifetime,as well asproviding Landau damping,which is particularly important for storage rings operating with ultra-low emittance or atlow beam energy.[Purpose]To further increase the bunch length without additional hardware costs,the phasemodulation in a dual-RF system is considered.[Methods]In this paper,turn-by-turn simulations incorporating randomsynchrotron radiation excitation are conducted,and a brief analysis is presented to explain the bunch lengtheningmechanism.[Results]Simulation results reveal that the peak current can be further reduced,thereby mitigating IBSeffects and enhancing the Touschek lifetime.Although the energy spread increases,which tends to reduce thebrightness of higher-harmonic radiation from the undulator,the brightness of the fundamental harmonic can,in fact,beimproved.
基金Shaanxi Province Qin Chuangyuan“Scientist+Engineer”Team Construction Project(2022KXJ-071)2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project(2022JH-ZHFHTS-0012)+8 种基金Shaanxi Province Key Research and Development Plan-“Two Chains”Integration Key Project-Qin Chuangyuan General Window Industrial Cluster Project(2023QCY-LL-02)Xixian New Area Science and Technology Plan(2022-YXYJ-003,2022-XXCY-010)2024 Scientific Research Project of Shaanxi National Defense Industry Vocational and Technical College(Gfy24-07)Shaanxi Vocational and Technical Education Association 2024 Vocational Education Teaching Reform Research Topic(2024SZX354)National Natural Science Foundation of China(U24A20115)2024 Shaanxi Provincial Education Department Service Local Special Scientific Research Program Project-Industrialization Cultivation Project(24JC005,24JC063)Shaanxi Province“14th Five-Year Plan”Education Science Plan,2024 Project(SGH24Y3181)National Key Research and Development Program of China(2023YFB4606400)Longmen Laboratory Frontier Exploration Topics Project(LMQYTSKT003)。
文摘A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.
基金financially supported by the National Key R&D Program of China(2024YFD1200800)the Guangdong Basic and Applied Basic Research Foundation,China(2024A1515030094)。
文摘Highlights OsCAX2 is localized to tonoplast,and cadmium induces its expression.OsCAX2 overexpression reduces cadmium concentration in indica rice grains by 49.1%.Cadmium(Cd)exposure poses significant health risks to humans,and the International Agency for Research on Cancer has classified it as a Group I carcinogen.Cadmium undergoes minimal metabolism in the human body;consequently,prolonged Cd^(2+)exposure can cause severe damage to multiple organs including the liver,kidneys,lungs,bones,and immune system(Shao et al.2024).Rice,one of the three global staple crops,and Cd exposure in humans primarily occurs the consumption of contaminated rice grains.The contribution of rice to the total dietary Cd intake is over 50% for non-smoking Asian populations(Chen et al.2018;Shi et al.2020).
基金supported by the National Natural Science Foundation of China(42471336,52379021 and 42201278)the Hebei Province Backbone Talent Program,China(Returnee Platform for Overseas Study)(A20240028)+2 种基金the Hebei Province Statistical Science Research Project,China(2024HZ04)the Hebei Province Graduate Education and Teaching Reform Research Project,China(YJG2024046)the Innovation Ability Training Program for Postgraduate Students of Hebei Provincial Department of Education,China(CXZZSS2025048)。
文摘A comprehensive assessment of grain supply,demand,and ecosystem service flows is essential for identifying grain movement pathways,ensuring regional grain security,and guiding sustainable management strategies.However,current studies primarily focus on short-term grain provision services while neglecting the spatiotemporal variations in grain flows across different scales.This gap limits the identification of dynamic matching relationships and the formulation of optimization strategies for balancing grain flows.This study examined the spatiotemporal evolution of grain supply and demand in the Beijing-Tianjin-Hebei(BTH)region from 1980 to 2020.Using the Enhanced TwoStep Floating Catchment Area method,the grain provision ecosystem service flows were quantified,the changes in supply–demand matching under different grain flow scenarios were analyzed and the optimal distance threshold for grain flows was investigated.The results revealed that grain production follows a spatial distribution pattern characterized by high levels in the southeast and low levels in the northwest.A significant mismatch exists between supply and demand,and it shows a scale effect.Deficit areas are mainly concentrated in the northwest,while surplus areas are mainly located in the central and southern regions.As the spatial scale increases,the ecosystem service supply–demand ratio(SDR)classification becomes more clustered,while it exhibits greater spatial SDR heterogeneity at smaller scales.This study examined two distinct scenarios of grain provision ecosystem service flow dynamics based on 100 and 200 km distance thresholds.The flow increased significantly,from 2.17 to 11.81million tons in the first scenario and from 2.41 to 12.37 million tons in the second scenario over nearly 40 years,forming a spatial movement pattern from the central and southern regions to the surrounding areas.Large flows were mainly concentrated in the interior of urban centers,with significant outflows between cities such as Baoding,Shijiazhuang,Xingtai,and Hengshui.At the county scale,supply–demand matching patterns remained consistent between the grain flows in the two scenarios.Notably,incorporating grain flow dynamics significantly reduced the number of grain-deficit areas compared to scenarios without grain flow.In 2020,grain-deficit counties decreased by28.79 and 37.88%,and cities by 12.50 and 25.0%under the two scenarios,respectively.Furthermore,the distance threshold for achieving optimal supply and demand matching at the county scale was longer than at the city scale in both grain flow scenarios.This study provides valuable insights into the dynamic relationships and heterogeneous patterns of grain matching,and expands the research perspective on grain and ecosystem service flows across various spatiotemporal scales.
基金supported by the director of Indian Council of Agricultural Research and International Rice Research Institute (ICAR-CRRI), Cuttack, Indiathe coordinator of the ICAR-sponsored project ‘C-reactive protein (CRP) in Biofortification in Selected Crops’, India
文摘CR Dhan 310(CRD310),a biofortified rice variety,contains a significantly higher level of grain protein compared with its recurrent parent Naveen(NV),as well as most adapted high-yielding rice varieties in India.Although a limited investigation depicted that CRD310 contained higher levels of glutelin and some essential amino acids,detailed biochemical,molecular,and cellular mechanisms remain to be studied.As one of the means to identify the proteins and understand the underlying mechanism of higher proteins accumulation in grains of CRD310,the comparative proteomics was undertaken on grains of CRD310 and NV at the yellow ripening stage.
