In the literature,stationary phase analysis of Kirchhoff-type demigrated fields is carried out mainly under the following two conditions：（1） The considered isochrone and the target reflector are tangential to each ...In the literature,stationary phase analysis of Kirchhoff-type demigrated fields is carried out mainly under the following two conditions：（1） The considered isochrone and the target reflector are tangential to each other;（2） The spatial duration of the wavelet of the depthmigrated image is short.For the isochrones that are not tangential to the target reflector and for the depth-migrated images that have a large spatial duration,the published stationary phase equation for the demigrated field will become invalid.For performing the stationary phase analysis of the Kirchhoff-type demigrated field under the conditions that the considered isochrone and the target reflector are not tangential to each other and that the spatial duration of the wavelet of the depth-migrated image is not short（the general conditions）,I derive the formulas for the factors appearing in the stationary phase formula in two dimensions,from which I find that for different isochrones the horizontal coordinates of the stationary point of the depth difference function are different.Also,the equation for the Kirchhoff-type demigrated field consists of two parts.One is the true-amplitude demigrated signal and the other is the amplitude distortion factor.From these facts the following two conclusions can be drawn：（1） A demigrated signal is composed of many depth-migrated images and one depth-migrated image trace provides only one sample to the demigrated signal;and（2） The amplitude distortion effect is an effect inherent in the Kirchhoff-type demigration and cannot be eliminated during demigration.If this effect should be eliminated,one should do an amplitude correction after demigration.展开更多
A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample ...A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.展开更多
A new method of the quantitative phase analysis of the sample containing an amorphous phase or a standardless phase by X-ray diffraction is proposed in the paper. The addtion of a reference phase or some analytical ph...A new method of the quantitative phase analysis of the sample containing an amorphous phase or a standardless phase by X-ray diffraction is proposed in the paper. The addtion of a reference phase or some analytical phase to the analyzed sample is not required in this method and the experimental results are satisfactory.展开更多
Uniaxial tension tests were conducted on single-edge-notched tensile specimens of pure molybdenum with a mesh grid pattern in front of the notch. A series of images of crack initialization and propagation with a disto...Uniaxial tension tests were conducted on single-edge-notched tensile specimens of pure molybdenum with a mesh grid pattern in front of the notch. A series of images of crack initialization and propagation with a distorted mesh grid pattern were obtained by means of in situ scanning electron microscopy. Strain fields around the crack tip were mapped successively using geometric phase analysis and digital image correlation techniques, and then compared with the predictions obtained through linear elastic fracture mechanics （LEFM）. The comparison shows that the measured strain distribution ahead of the crack tip is consistent with the LEFM predictions of up to 25 μm from the crack tip.展开更多
Three new vorticity vectors have been proposed by Gao et al to study the two-dimensional tropical convection. In the present paper, phase relations between surface rain rate and the vorticity vectors are analysed with...Three new vorticity vectors have been proposed by Gao et al to study the two-dimensional tropical convection. In the present paper, phase relations between surface rain rate and the vorticity vectors are analysed with the calculations of lag correlation coefficients based on hourly zonally-averaged mass-integrated cloud-resolving simulation data. The cloud-resolving model is integrated with the vertical velocity, zonal wind, horizontal thermal and moisture advections, and sea surface temperature observed and derived from tropical ocean global atmosphere - coupled ocean atmosphere response experiment （TOGA-COARE） for 10 days. Maximum local increase of the vertical component of the convective vorticity vector leads maximum surface rain rate by 2 hours mainly due to the interaction between vorticity and zonal gradient of ice heating. While maximum local increase of the vertical component of the moist vorticity vector leads maxfinum surface rain rate by 2 hours mainly because of the interaction between zonal specific humidity gradient and zonal buoyancy gradient. And the maximum local decrease of the zonal component of the dynamic vorticity vector leads maximum surface rain rate by 2 hours mainly due to the interactions between vorticity and vertical pressure gradient as well as vorticity and buoyancy.展开更多
In situ formed low density O＇-sialon-based multiphase ceramics were prepared by liquid-phase sintering method at 1400°C with Si3N4, SiO2 and Al2O3 as raw materials.Crystalline phases were identified by X-ray dif...In situ formed low density O＇-sialon-based multiphase ceramics were prepared by liquid-phase sintering method at 1400°C with Si3N4, SiO2 and Al2O3 as raw materials.Crystalline phases were identified by X-ray diffraction（XRD）.The quantitative phase analysis was finished by matrix-flushing method and the substitution parameter x value of O＇-sialon was estimated.The effects of sintering additives on the phase composition of the material were studied.The results show that, when using Y2O3 alone, Al6Si2O13 phase can be formed in the material, but when using Y2O3 and MgO, MgAl2O4 phase can be preferentially formed and the Al6Si2O13 is not observed.The mechanical properties of the material were measured and the relationships between microstructure and mechanical properties were discussed.The sample with Y2O3 and MgO sintering additives, using fused quartz alone as SiO2 source, displays a combination of high bending strength（163 MPa） and good fracture toughness（3.11 MPa·m1/2）.Bending strength and fracture toughness of the samples increase with the increase of the content and aspect ratio of elongated grains and decrease with the increase of the porosity.展开更多
A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtai...A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtained. For a multicomponent system in which (n-2) pure phases are added into an n-phase compnent sample and theweight fractions of all n phases can be determined by the method. The test results of confirmation agree well with the theory.展开更多
A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus.The criterion of standardless X-ray diffraction analysis was suggested,so as ...A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus.The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.展开更多
A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus,The criterion of standardless X-ray diffraction analysis was suggested,so as ...A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus,The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.展开更多
Calcium silicate slag is the residue of process of pre-desilication alkali lime sintering applied in the high-alumina fly ash to extract the alumina.The quantitative phase analysis(QPA) of the calcium silicate slag ha...Calcium silicate slag is the residue of process of pre-desilication alkali lime sintering applied in the high-alumina fly ash to extract the alumina.The quantitative phase analysis(QPA) of the calcium silicate slag has been performed by the Rietveld method based on the powder X-ray diffraction(XRD) with the aid of noncommercial software GSAS-EXPGUI.A known weight of crystalline internal standard(10% CaF_2) was added to the calcium silicate slag to calculate the fraction of amorphous phase and other crystalline phases on an absolute basis.Besides,the calcium silicate slag was characterized by X-ray fluorescence(XRF) and thermo gravimetric(TG) differential scanning calorimetry(DSC) to test the QPA results and investigate its other characters.Finally,the results show that the amorphous fraction is 17.5%(hereinafter,the percentages refer to the mass fraction),and the major crystalline phases detected in the calcium silicate slag consist of 23.5% Beta-Ca_2 SiO_4,10.0% bredigite,10.3% Ca_3Al_2O_6(C_3A) and 21.6% CaCO_3.展开更多
A set of device is designed based on PC to realize the functions of traditional potentiostats in the phase ana1ysis of galvanochemistry. In the device, A/D and D/A conversion is used to measure the electrode potential...A set of device is designed based on PC to realize the functions of traditional potentiostats in the phase ana1ysis of galvanochemistry. In the device, A/D and D/A conversion is used to measure the electrode potential and convert the voltage for outPut; specific program runs in the PC to regulate and control the system. The effect of the proportion factor Kp on the control variation is researched through certain experiment. Two experiments, the control of electrolysis in constant poteniial and the determination of polarization curves, are designed to test and evaluate the effectiveness of the device. The experimemel results show that the variation between the actualanode potential and the target potential could be controlled to below 1 mV if Kp is set to an appropriate value.展开更多
Complex deoxidizer is an important supplementary material for steelmaking,which can not only absorb liquid steel inclusions and improve the quality of molten steel,but also enhance deoxidation,desulfurization, dephosp...Complex deoxidizer is an important supplementary material for steelmaking,which can not only absorb liquid steel inclusions and improve the quality of molten steel,but also enhance deoxidation,desulfurization, dephosphorization,to prevent the molten steel suction and reduce the molten steel temperature loss.Currently,the complex deoxidizer all contain a certain amount of metal aluminium.The metal aluminium can not be determined for the steel.The entire aluminium contents were regarded as the content of approximate metal aluminium,that often bring great economic losses.Because A1,0,price is cheaper than metal aluminite powder,suppliers added a certain amount of Al_2O_3 in complex deoxidizer,pretend to be the metal aluminium to reap huge profits.This paper put forward a kind of method for determining aluminum,which would reduce loss of the enterprise.Research and put forward an iron triehloride,which extracted from Al metal from complex deoxidizer.Meantime,using orthogonal design of the experiment has been optimized for working conditions.The RSD of the samples are I. 07%-1.94%,the recoveries of the experiment results are 97.0%-110.0%,which expressed the precision and accuracy of the experiment are good.The establishment of the iron triehloride as a extractor,which is rapid and accurate for determination of Al metal in complex deoxidizer.展开更多
This study analyzed the prevalent physicochemical phases of smelting slag from the perspective of data science and chemistry.Findings delineated the silicate phase as the pivotal and predominant constraining phase for...This study analyzed the prevalent physicochemical phases of smelting slag from the perspective of data science and chemistry.Findings delineated the silicate phase as the pivotal and predominant constraining phase for the resource utilization of smelting slag.An intricate correlation between metallic elements and dominant phases was constructed.Typical silicate phase olivine(OL)was synthesized as a paradigm to examine alkali depolymerization,unveiling the optimal conditions for such depolymerization to be an alkali to olivine molar ratio of 1:5,a reaction temperature of 700℃,and a duration of 3 h.The underlying mechanism of alkali depolymerization within silicate phases was elucidated under these parameters.The reaction mechanism of alkali depolymerization within silicate phases can be encapsulated in three sequential steps:(1)NaOH dissociation and subsequent adsorption of OH^(-)to cationic(Mg or Fe)sites;(2)disruption of cation-oxygen bonds,leading to the formation of hydroxide compounds,which then underwent oxidation;(3)Na^(+)occupied the resultant cation vacancy sites,instigating further depolymerization of the intermediate Na_(2)(Mg,Fe)SiO_(4).The articulated mechanism is anticipated to furnish theoretical underpinnings for the efficacious recuperation of metals from smelting slags.展开更多
Besides W-phase and Ni-phase, there is a micro new phase in W-Mo-Ni-Fe heavy alloy added with La and Mn. The micro phase can he extracted as an electrolytic residue by the following method: A mixture of the new phase ...Besides W-phase and Ni-phase, there is a micro new phase in W-Mo-Ni-Fe heavy alloy added with La and Mn. The micro phase can he extracted as an electrolytic residue by the following method: A mixture of the new phase and the Ni-phase is isolated when an alloy sample is electrolyzed in 5%NaOH+1% tartaric acid solution. And the new phase can be isolated alone when the mixture is electrolyzed in 10% acetylacetone +1%LiCl methanol solution. The result of the quantitative phase analysis indicates that the new phase is a complex oxide rich in La, W and Mn.The interfacial segregation of oxygen decreases and the binding force between W-Ni Phases increases because of the existence of the oxide. So the mechanical properties of the alloy are improved.展开更多
The microstructures of a single crystal Ni-base superalloy with [001] orientation were observed by means of TEM. Results showed that the fine γ' particles were precipitated in the γ matrix channels during the t...The microstructures of a single crystal Ni-base superalloy with [001] orientation were observed by means of TEM. Results showed that the fine γ' particles were precipitated in the γ matrix channels during the tensile deformation of the alloy. Thermodynamics analysis indicated that the solubility of elements M(Al,Ta) within the γ matrix may be changed when the alloy was deformed by the external applied stress. The tensile stress reduced the solubility of elements Al and Ta so as to occur the over-saturation and agglomeration of them, which promoted the precipitation of fine γ'-phase in the γ matrix.展开更多
Thermal analyses on squeeze cast aluminum alloy A380(SC A380) solidified under 90MPa were carried out to study the microstructure development of the alloy, in which a differential scanning calorimeter(DSC) was employe...Thermal analyses on squeeze cast aluminum alloy A380(SC A380) solidified under 90MPa were carried out to study the microstructure development of the alloy, in which a differential scanning calorimeter(DSC) was employed. During the DSC runs, heating and cooling rates of 1, 3, 10, and 20 °C·min^(-1) were applied to investigate the heating and cooling effects on dissolution of secondary eutectic phases and microstructure evolution. Various reactions corresponding to troughs and peaks of the DSC curves were identified as corresponding to phase transformations taking place during dissolution or precipitation suggested by the principles of thermodynamics and kinetics. The comparison of the identified characteristic temperatures in the measured heating and cooling curves are generally in good agreement with the computed equilibrium temperatures. The microstructure analyses by scanning electron microscopy(SEM) with energy dispersive X-ray spectroscopy(EDS) indicate that the distribution and morphology of secondary phases present in the microstructure of the annealed sample are similar to the as-cast A380, i.e., strip β(Si), buck bone like or dot distributed θ(Al_2Cu), β(Al_5Fe Si) and Al_(15)(FeMn)_3Si_2. Two kinetic methods are employed to calculate the activation energies of the three common troughs and three common peaks in DSC curves of SC A380. The activation energies of the identified reaction θ_(CuAl_2) = α(Al)+β(Si) is 188.7 and 187.1 k J?mol^(-1) when the activation energies of reaction α(Al)+β(Si)→θCu Al_2 is^(-1)22.7 and^(-1)21.8 k J?mol^(-1), by the Kissinger and Starink methods, respectively.展开更多
In this paper, we study the stability of locally rotationally symmetric （LRS） Bianchi I universe model in f（T） gravity through phase space analysis. We assume that the f（T） gravity can be treated as effective da...In this paper, we study the stability of locally rotationally symmetric （LRS） Bianchi I universe model in f（T） gravity through phase space analysis. We assume that the f（T） gravity can be treated as effective dark energy behaving like perfect fluid, and suggest that there are interactions between pressureless matter as well as dark energy. We construct the corresponding autonomous system of equations to check the stability of the model for non phantom, vacuum and phantom phases. It is concluded that critical points remain more stable in phantom phase as compared to non phantom and vacuum cases. Finaily, we discuss the cosmological behavior of the model through some cosmological parameters.展开更多
Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences amo...Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.展开更多
Glycerides are first separated to classes of triglycerides(TGs), diglycerides(DGs) and monoglycerides(MGs) by normal phase HPLC on silica gel column. Individual triglyceride separation is then achieved by non-aqueous ...Glycerides are first separated to classes of triglycerides(TGs), diglycerides(DGs) and monoglycerides(MGs) by normal phase HPLC on silica gel column. Individual triglyceride separation is then achieved by non-aqueous reversed phase(NARP) HPLC on C_(18) column with UV detection at 215nm.展开更多
基金supported by the National Natural Science Foundation of China (Grant No.40574052)
文摘In the literature,stationary phase analysis of Kirchhoff-type demigrated fields is carried out mainly under the following two conditions：（1） The considered isochrone and the target reflector are tangential to each other;（2） The spatial duration of the wavelet of the depthmigrated image is short.For the isochrones that are not tangential to the target reflector and for the depth-migrated images that have a large spatial duration,the published stationary phase equation for the demigrated field will become invalid.For performing the stationary phase analysis of the Kirchhoff-type demigrated field under the conditions that the considered isochrone and the target reflector are not tangential to each other and that the spatial duration of the wavelet of the depth-migrated image is not short（the general conditions）,I derive the formulas for the factors appearing in the stationary phase formula in two dimensions,from which I find that for different isochrones the horizontal coordinates of the stationary point of the depth difference function are different.Also,the equation for the Kirchhoff-type demigrated field consists of two parts.One is the true-amplitude demigrated signal and the other is the amplitude distortion factor.From these facts the following two conclusions can be drawn：（1） A demigrated signal is composed of many depth-migrated images and one depth-migrated image trace provides only one sample to the demigrated signal;and（2） The amplitude distortion effect is an effect inherent in the Kirchhoff-type demigration and cannot be eliminated during demigration.If this effect should be eliminated,one should do an amplitude correction after demigration.
文摘A new method for quantitative phase analysis is proposed by using X-ray diffraction multi-peak match intensity ratio. This method can obtain the multi-peak match intensity ratio among each phase in the mixture sample by using all diffraction peak data in the mixture sample X-ray diffraction spectrum and combining the relative intensity distribution data of each phase standard peak in JCPDS card to carry on the least square method regression analysis. It is benefit to improve the precision of quantitative phase analysis that the given single line ratio which is usually adopted is taken the place of the multi-peak match intensity ratio and is used in X-ray diffraction quantitative phase analysis of the mixture sample. By analyzing four-group mixture sample, adopting multi-peak match intensity ratio and X-ray diffraction quantitative phase analysis principle of combining the adiabatic and matrix flushing method, it is tested that the experimental results are identical with theory.
文摘A new method of the quantitative phase analysis of the sample containing an amorphous phase or a standardless phase by X-ray diffraction is proposed in the paper. The addtion of a reference phase or some analytical phase to the analyzed sample is not required in this method and the experimental results are satisfactory.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11562016 and 11672175)
文摘Uniaxial tension tests were conducted on single-edge-notched tensile specimens of pure molybdenum with a mesh grid pattern in front of the notch. A series of images of crack initialization and propagation with a distorted mesh grid pattern were obtained by means of in situ scanning electron microscopy. Strain fields around the crack tip were mapped successively using geometric phase analysis and digital image correlation techniques, and then compared with the predictions obtained through linear elastic fracture mechanics （LEFM）. The comparison shows that the measured strain distribution ahead of the crack tip is consistent with the LEFM predictions of up to 25 μm from the crack tip.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 40433007 and 40505012)the Knowledge Innovation Program of the Chinese Academy of Sciences (IAP07214)"Outstanding Oversea Scholars" project (Grant No 2005-2-17)
文摘Three new vorticity vectors have been proposed by Gao et al to study the two-dimensional tropical convection. In the present paper, phase relations between surface rain rate and the vorticity vectors are analysed with the calculations of lag correlation coefficients based on hourly zonally-averaged mass-integrated cloud-resolving simulation data. The cloud-resolving model is integrated with the vertical velocity, zonal wind, horizontal thermal and moisture advections, and sea surface temperature observed and derived from tropical ocean global atmosphere - coupled ocean atmosphere response experiment （TOGA-COARE） for 10 days. Maximum local increase of the vertical component of the convective vorticity vector leads maximum surface rain rate by 2 hours mainly due to the interaction between vorticity and zonal gradient of ice heating. While maximum local increase of the vertical component of the moist vorticity vector leads maxfinum surface rain rate by 2 hours mainly because of the interaction between zonal specific humidity gradient and zonal buoyancy gradient. And the maximum local decrease of the zonal component of the dynamic vorticity vector leads maximum surface rain rate by 2 hours mainly due to the interactions between vorticity and vertical pressure gradient as well as vorticity and buoyancy.
文摘In situ formed low density O＇-sialon-based multiphase ceramics were prepared by liquid-phase sintering method at 1400°C with Si3N4, SiO2 and Al2O3 as raw materials.Crystalline phases were identified by X-ray diffraction（XRD）.The quantitative phase analysis was finished by matrix-flushing method and the substitution parameter x value of O＇-sialon was estimated.The effects of sintering additives on the phase composition of the material were studied.The results show that, when using Y2O3 alone, Al6Si2O13 phase can be formed in the material, but when using Y2O3 and MgO, MgAl2O4 phase can be preferentially formed and the Al6Si2O13 is not observed.The mechanical properties of the material were measured and the relationships between microstructure and mechanical properties were discussed.The sample with Y2O3 and MgO sintering additives, using fused quartz alone as SiO2 source, displays a combination of high bending strength（163 MPa） and good fracture toughness（3.11 MPa·m1/2）.Bending strength and fracture toughness of the samples increase with the increase of the content and aspect ratio of elongated grains and decrease with the increase of the porosity.
文摘A new method for quantitative X-ray diffraction phase analysis of a powder misture has been developed according to Popovic's doping method. The weight fraction of amorphous material in the analysed sample is obtained. For a multicomponent system in which (n-2) pure phases are added into an n-phase compnent sample and theweight fractions of all n phases can be determined by the method. The test results of confirmation agree well with the theory.
文摘A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus.The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.
文摘A new expression of quantitative phase analysis by standardless X-ray diffraction has been derived using intensity matrix of vector modulus,The criterion of standardless X-ray diffraction analysis was suggested,so as to separate the diffraction pattern of every phase from that of sample.The optimal solution could be obtained by the least squares regression.
基金the National Natural Science Foundation of China(Nos.51302012 and 51274042)the China Postdoctoral Science Foundation Funded Project(No.2016T90034)the Inner Mongolia Science and Technology Major Projects 2013
文摘Calcium silicate slag is the residue of process of pre-desilication alkali lime sintering applied in the high-alumina fly ash to extract the alumina.The quantitative phase analysis(QPA) of the calcium silicate slag has been performed by the Rietveld method based on the powder X-ray diffraction(XRD) with the aid of noncommercial software GSAS-EXPGUI.A known weight of crystalline internal standard(10% CaF_2) was added to the calcium silicate slag to calculate the fraction of amorphous phase and other crystalline phases on an absolute basis.Besides,the calcium silicate slag was characterized by X-ray fluorescence(XRF) and thermo gravimetric(TG) differential scanning calorimetry(DSC) to test the QPA results and investigate its other characters.Finally,the results show that the amorphous fraction is 17.5%(hereinafter,the percentages refer to the mass fraction),and the major crystalline phases detected in the calcium silicate slag consist of 23.5% Beta-Ca_2 SiO_4,10.0% bredigite,10.3% Ca_3Al_2O_6(C_3A) and 21.6% CaCO_3.
文摘A set of device is designed based on PC to realize the functions of traditional potentiostats in the phase ana1ysis of galvanochemistry. In the device, A/D and D/A conversion is used to measure the electrode potential and convert the voltage for outPut; specific program runs in the PC to regulate and control the system. The effect of the proportion factor Kp on the control variation is researched through certain experiment. Two experiments, the control of electrolysis in constant poteniial and the determination of polarization curves, are designed to test and evaluate the effectiveness of the device. The experimemel results show that the variation between the actualanode potential and the target potential could be controlled to below 1 mV if Kp is set to an appropriate value.
文摘Complex deoxidizer is an important supplementary material for steelmaking,which can not only absorb liquid steel inclusions and improve the quality of molten steel,but also enhance deoxidation,desulfurization, dephosphorization,to prevent the molten steel suction and reduce the molten steel temperature loss.Currently,the complex deoxidizer all contain a certain amount of metal aluminium.The metal aluminium can not be determined for the steel.The entire aluminium contents were regarded as the content of approximate metal aluminium,that often bring great economic losses.Because A1,0,price is cheaper than metal aluminite powder,suppliers added a certain amount of Al_2O_3 in complex deoxidizer,pretend to be the metal aluminium to reap huge profits.This paper put forward a kind of method for determining aluminum,which would reduce loss of the enterprise.Research and put forward an iron triehloride,which extracted from Al metal from complex deoxidizer.Meantime,using orthogonal design of the experiment has been optimized for working conditions.The RSD of the samples are I. 07%-1.94%,the recoveries of the experiment results are 97.0%-110.0%,which expressed the precision and accuracy of the experiment are good.The establishment of the iron triehloride as a extractor,which is rapid and accurate for determination of Al metal in complex deoxidizer.
基金financially supported by the National Natural Science Foundation of China(Nos.22006040 and 22376070)the National Key Research and Development Program of China(No.2019YFA0210404)the Research Project on Characteristic Innovation of University Teachers(No.2022XJZZ02)。
文摘This study analyzed the prevalent physicochemical phases of smelting slag from the perspective of data science and chemistry.Findings delineated the silicate phase as the pivotal and predominant constraining phase for the resource utilization of smelting slag.An intricate correlation between metallic elements and dominant phases was constructed.Typical silicate phase olivine(OL)was synthesized as a paradigm to examine alkali depolymerization,unveiling the optimal conditions for such depolymerization to be an alkali to olivine molar ratio of 1:5,a reaction temperature of 700℃,and a duration of 3 h.The underlying mechanism of alkali depolymerization within silicate phases was elucidated under these parameters.The reaction mechanism of alkali depolymerization within silicate phases can be encapsulated in three sequential steps:(1)NaOH dissociation and subsequent adsorption of OH^(-)to cationic(Mg or Fe)sites;(2)disruption of cation-oxygen bonds,leading to the formation of hydroxide compounds,which then underwent oxidation;(3)Na^(+)occupied the resultant cation vacancy sites,instigating further depolymerization of the intermediate Na_(2)(Mg,Fe)SiO_(4).The articulated mechanism is anticipated to furnish theoretical underpinnings for the efficacious recuperation of metals from smelting slags.
文摘Besides W-phase and Ni-phase, there is a micro new phase in W-Mo-Ni-Fe heavy alloy added with La and Mn. The micro phase can he extracted as an electrolytic residue by the following method: A mixture of the new phase and the Ni-phase is isolated when an alloy sample is electrolyzed in 5%NaOH+1% tartaric acid solution. And the new phase can be isolated alone when the mixture is electrolyzed in 10% acetylacetone +1%LiCl methanol solution. The result of the quantitative phase analysis indicates that the new phase is a complex oxide rich in La, W and Mn.The interfacial segregation of oxygen decreases and the binding force between W-Ni Phases increases because of the existence of the oxide. So the mechanical properties of the alloy are improved.
文摘The microstructures of a single crystal Ni-base superalloy with [001] orientation were observed by means of TEM. Results showed that the fine γ' particles were precipitated in the γ matrix channels during the tensile deformation of the alloy. Thermodynamics analysis indicated that the solubility of elements M(Al,Ta) within the γ matrix may be changed when the alloy was deformed by the external applied stress. The tensile stress reduced the solubility of elements Al and Ta so as to occur the over-saturation and agglomeration of them, which promoted the precipitation of fine γ'-phase in the γ matrix.
基金supported by the Natural Sciences and Engineering Research Council of Canada(NSERC)Discovery(No239080-2010)the project of Shandong science and technology development plan(No2014GGX103035),China
文摘Thermal analyses on squeeze cast aluminum alloy A380(SC A380) solidified under 90MPa were carried out to study the microstructure development of the alloy, in which a differential scanning calorimeter(DSC) was employed. During the DSC runs, heating and cooling rates of 1, 3, 10, and 20 °C·min^(-1) were applied to investigate the heating and cooling effects on dissolution of secondary eutectic phases and microstructure evolution. Various reactions corresponding to troughs and peaks of the DSC curves were identified as corresponding to phase transformations taking place during dissolution or precipitation suggested by the principles of thermodynamics and kinetics. The comparison of the identified characteristic temperatures in the measured heating and cooling curves are generally in good agreement with the computed equilibrium temperatures. The microstructure analyses by scanning electron microscopy(SEM) with energy dispersive X-ray spectroscopy(EDS) indicate that the distribution and morphology of secondary phases present in the microstructure of the annealed sample are similar to the as-cast A380, i.e., strip β(Si), buck bone like or dot distributed θ(Al_2Cu), β(Al_5Fe Si) and Al_(15)(FeMn)_3Si_2. Two kinetic methods are employed to calculate the activation energies of the three common troughs and three common peaks in DSC curves of SC A380. The activation energies of the identified reaction θ_(CuAl_2) = α(Al)+β(Si) is 188.7 and 187.1 k J?mol^(-1) when the activation energies of reaction α(Al)+β(Si)→θCu Al_2 is^(-1)22.7 and^(-1)21.8 k J?mol^(-1), by the Kissinger and Starink methods, respectively.
文摘In this paper, we study the stability of locally rotationally symmetric （LRS） Bianchi I universe model in f（T） gravity through phase space analysis. We assume that the f（T） gravity can be treated as effective dark energy behaving like perfect fluid, and suggest that there are interactions between pressureless matter as well as dark energy. We construct the corresponding autonomous system of equations to check the stability of the model for non phantom, vacuum and phantom phases. It is concluded that critical points remain more stable in phantom phase as compared to non phantom and vacuum cases. Finaily, we discuss the cosmological behavior of the model through some cosmological parameters.
基金Supported by the‘Supporting First Action’Joint Foundation for Outstanding Postdoctoral Program under Grant Nos Y7YBSH0001 and Y7BSH14001the National Natural Science Foundation of China under Grant No 61434006the National Key Basic Research Program of China under Grant No 2017YFB0102302
文摘Beam steering in implant defined coherently coupled vertical cavity surface emitting laser （VCSEL） arrays is simulated using the FDTD solution software. Angular deflection dependent on relative phase differences among elements, inter-element spacing, element size and emitted wavelength is analyzed detailedly and systematically. We design and fabricate 1×2 implant defined VCSEL arrays for optimum beam steering performance. Electroni- cally controlled beam steering with a maximum deflection angle of 1.6° is successfully achieved in the 1 × 2 VCSEL arrays. The percentage of the power in the central lobe is above 39% when steering. The results show that the steering is controllable. Compared with other beam steering methods, the fabrication process is simple and of low cost.
文摘Glycerides are first separated to classes of triglycerides(TGs), diglycerides(DGs) and monoglycerides(MGs) by normal phase HPLC on silica gel column. Individual triglyceride separation is then achieved by non-aqueous reversed phase(NARP) HPLC on C_(18) column with UV detection at 215nm.
