Double perovskite-type catalysts including La2 CoMnO6 and La2 CuMnO6 are first evaluated for the effectiveness in removing volatile organic compounds（VOCs）, and single perovskites（La CoO3, LaMnO3, and La Cu O3） ar...Double perovskite-type catalysts including La2 CoMnO6 and La2 CuMnO6 are first evaluated for the effectiveness in removing volatile organic compounds（VOCs）, and single perovskites（La CoO3, LaMnO3, and La Cu O3） are also tested for comparison. All perovskites are tested with the gas hourly space velocity（GHSV） of 30,000 hr^-1, and the temperature range of100–600℃ for C7H8 removal. Experimental results indicate that double perovskites have better activity if compared with single perovskites. Especially, toluene（C7H8） can be completely oxidized to CO2 at 300℃ as La2 Co MnO6 is applied. Characterization of catalysts indicates that double perovskites own unique surface properties and are of higher amounts of lattice oxygen,leading to higher activity. Additionally, apparent activation energy of 68 k J/mol is calculated using Mars-van Krevelen model for C7 H8 oxidation with La2 Co Mn O6 as catalyst. For durability test, both La2 Co Mn O6 and La2 CuMnO6 maintain high C7 H8 removal efficiencies of 100% and98%, respectively, at 300℃ and 30,000 hr^-1, and they also show good resistance to CO2（5%） and H2 O（g）（5%） of the gas streams tested. For various VOCs including isopropyl alcohol（C3H8 O）,ethanal（C2H4O）, and ethylene（C2H4） tested, as high as 100% efficiency could be achieved with double perovskite-type catalysts operated at 300–350℃, indicating that double perovskites are promising catalysts for VOCs removal.展开更多
Iron-based perovskite-type compounds modified by Ru were prepared through sol-gel process to study its catalytic activity of NOx direct decomposition at low temperature and evaluate the conversion of NO under the expe...Iron-based perovskite-type compounds modified by Ru were prepared through sol-gel process to study its catalytic activity of NOx direct decomposition at low temperature and evaluate the conversion of NO under the experimental conditions. The catalytic activity of La 0.9Ce 0.1Fe 0.8-nCo 0.2RunO3 （n=0.01,0.03,0.05,0.07,0.09）series for the NO, NO-CO two components, CO-HC-NO three components were also analyzed. The catalytic investigation evidenced that the presence of Ru is necessary for making highly activity in decomposition of nitric oxide even at low temperature（400 ℃）and La 0.9Ce 0.9Fe 0.75Co 0.2Ru 0.05O3 （n=0.05） has better activity in all the samples, the conversion of it is 58.5%. With the reducing gas（CO,C3H6）added into the gas, the catalyst displayed very high activity in decomposition of NO and the conversion of it is 80% and 92.5% separately.展开更多
La<sup>0.8 Cu<sup>0.2 MnO<sup>3±δ perovskite-type catalyst for methane combustion prepared through sol-gel process was characterized by X-ray Diffractometry（XRD）, X-ray Photoelectron Spectros...La<sup>0.8 Cu<sup>0.2 MnO<sup>3±δ perovskite-type catalyst for methane combustion prepared through sol-gel process was characterized by X-ray Diffractometry（XRD）, X-ray Photoelectron Spectroscopy（XPS） and Scanning Electron Microscopy（SEM）. XPS analyses reveal that the surface characteristics of the catalyst are changed. The lattice defects and oxygen vacancies on the catalyst surface are enhanced due to a part of La3+ being substituted by Cu2+ . Temperature-programmed-desorption（TPD） and temperature-programmed-reduction（TPR） analyses were carried out to study the catalytic behavior. It is found that there are two O2-desorption peaks at 350℃ and 650℃ in the TPD pattern, and two CH4-consumption peaks at 420℃ and 750℃ in the TPR patterns respectively, which indicates that the two kinds of oxygen species, so-called α and β oxygen, can react with the methane during catalytic combustion process. The catalytic activity tests were performed in a fixed-bed reactor, and the results show that the T<sup>1/2 at which the conversion of methane attains 50% of La<sup>0.8 Cu<sup>0.2 MnO<sup>3±δ is lower by 55℃ than that of LaMnO3. This indicates that the catalytic activity of-La<sup>0.8 Cu<sup>0.2 MnO<sup>3±δ is increased with partial substitution of Cu2+ for La3+ .-展开更多
Alkaline earth-metal titanates ATiO_(3)(A=Ca,Sr,and Ba)with a perovskite-type structure were used as supports for Ru-based catalysts to produce CO_(x)-free H_(2)via NH_(3)decomposition.The effects of alkalineearth met...Alkaline earth-metal titanates ATiO_(3)(A=Ca,Sr,and Ba)with a perovskite-type structure were used as supports for Ru-based catalysts to produce CO_(x)-free H_(2)via NH_(3)decomposition.The effects of alkalineearth metals on the physicochemical characteristics and catalytic activities of Ru/ATiO_(3)for NH_(3)decomposition were investigated using various techniques.The order of Ru/ATiO_(3)for NH_(3)conversion is Ru/BaTiO_(3)>Ru/SrTiO_(3)>Ru/CaTiO_(3)>Ru/TiO_(2)at the identical conditions,with the Ru/BaTiO_(3)catalyst demonstrating the highest NH_(3)conversion of 77.8%at 450℃and a gas hourly space velocity of 30,000 mL/gcat/h,which is 8.7,2.1,and 1.3 times of that over Ru/TiO_(2),Ru/CaTiO_(3),and Ru/SrTiO_(3),respectively.The formation of the ATiO_(3)phase can enrich the concentration of basic sites and oxygen vacancies compared with TiO_(2),which can induce the presence of strong metal-support interaction(SMSI)through the formation of Ru-O-Ti bonds.This SMSI effect increased the dispersion and electron density of Ru nano-particles on ATiO_(3)supports,and the electron-rich Ru nano-particles could weaken the chemisorptive strength of N_(2)and H_(2)on the Ru/ATiO_(3)catalysts,thereby promoting the reaction rate for NH_(3)decomposition.展开更多
A series of perovskite type oxides and supported Ag catalysts were prepared, and characterized by X ray diffraction (XRD) and X ray photoelectron spectroscopy (XPS). The catalytic activities of the catalyst...A series of perovskite type oxides and supported Ag catalysts were prepared, and characterized by X ray diffraction (XRD) and X ray photoelectron spectroscopy (XPS). The catalytic activities of the catalysts as well as influencing factors on catalytic activity have been investigated for the simultaneous removal of NOx and diesel soot particulate. An increase in catalytic activity for the selective reduction of NOx was observed with Ag addition in these perovskite oxides, especially with 5% Ag loading. This catalyst could be a promising candidate of catalytic material for the simultaneous elimination of NOx and diesel soot.展开更多
Clean energy and a sustainable environment are grand challenges that the world is facing which can be addressed by converting solar energy into transportable and storable fuels(chemical fuel).The main scientific and t...Clean energy and a sustainable environment are grand challenges that the world is facing which can be addressed by converting solar energy into transportable and storable fuels(chemical fuel).The main scientific and technological challenges for efficient solar energy conversion,energy storage,and environmental applications are the stability,durability,and performance of low-cost functional materials.Among different nanomaterials,perovskite type LaFeO_(3)has been extensively investigated as a photocatalyst due to its abundance,high stability,compositional and structural fexibility,high electrocatalytic activity,efficient sunlight absorption,and tunable band gap and band edges.Hence,it is urgent to write a comprehensive review to highlight the trend,challenges,and prospects of LaFeO_(3)in the field of photocatalytic solar energy conversion and environment purification.This critical review summarizes the history and basic principles of photocatalysis.Further,it reviews in detail the LaFeO_(3),applications,shortcomings,and activity enhancement strategies including the design of nanostructures,elemental doping,and heterojunctions construction such as Type-I,Type-II,Z-Type,and uncommon heterojunctions.Besides,the optical and electronic properties,charge carriers separation,electron transport phenomenon and alignment of the band gaps in LaFeO_(3)-based heterostructures are comprehensively discussed.展开更多
A facile procedure was carried out to prepare macroporous perovskite-type complex oxide catalysts of La1–xKxCo1–yFeyO3(x=0,0.1,y=0,0.1) by using the combined method of organic ligation and solution combustion.This m...A facile procedure was carried out to prepare macroporous perovskite-type complex oxide catalysts of La1–xKxCo1–yFeyO3(x=0,0.1,y=0,0.1) by using the combined method of organic ligation and solution combustion.This method could ensure the formation of the desired macroporous structures and the desired crystal phases of the prepared catalysts.It was found that the macroporous catalysts showed higher catalytic activities for soot combustion than that of the corresponding nanometric samples,and the macroporous ...展开更多
I.INTRODUCTION The perovskite-type compounds, as one kind of new functional materials has received more and more attention owing to their perfect crystal structure, unique electromagnetic properties, and high catalyti...I.INTRODUCTION The perovskite-type compounds, as one kind of new functional materials has received more and more attention owing to their perfect crystal structure, unique electromagnetic properties, and high catalytic activities for oxidation and hydrogena-展开更多
Aiming at the problems of insufficient activity and selectivity of Cu-based catalysts in CO_(2)hydrogenation to methanol,Al_(2)O_(3),ZrO_(2)and CeO_(2)modified Cu-ZnO catalysts by the co-precipitation method were prep...Aiming at the problems of insufficient activity and selectivity of Cu-based catalysts in CO_(2)hydrogenation to methanol,Al_(2)O_(3),ZrO_(2)and CeO_(2)modified Cu-ZnO catalysts by the co-precipitation method were prepared,and the influence mechanism of additives on the structure-performance relationship of the catalysts was systematically explored.Through a variety of characterization methods such as XRD,N2 physical adsorption-desorption,TEM,H_(2)-TPR,CO_(2)-TPD and XPS,combined with catalytic performance evaluation experiments,the correlation between the microstructure of catalysts and the reaction performance of CO_(2)hydrogenation to methanol was analyzed in depth.The results show that metal additives significantly improve the performance of catalysts.After the introduction of additives,the specific surface area and pore volume of the catalysts increase,the grain size of Cu decreases,and its dispersion improves.The Ce-modified CZC catalyst exhibited the best performance,with the grain size of CuO as small as 11.41 nm,and the surface oxygen vacancy concentration(OⅡ/OⅠ=3.15)was significantly higher than that of other samples.The reaction performance test shows that under the conditions of 2.8 MPa,8000 h−1 and 280℃,the CO_(2)conversion of the CZC catalyst reached 18.83%,the methanol selectivity was 68.40%,and the methanol yield was 12.88%,all of which are superior to other catalysts.Its excellent performance can be attributed to the fact that CeO_(2)enhances the metal-support interaction,increases the surface basicity,promotes the adsorption and activation of CO_(2),and simultaneously inhibits the reverse water-gas shift side reaction.This study clarifies the structure-activity regulation mechanism of additive modification on Cu-ZnO catalysts,providing a theoretical basis and technical reference for the development of efficient catalysts for CO_(2)hydrogenation to methanol.展开更多
In this paper,the Ni/Al_(2)O_(3) monolithic catalyst with 15%Ni content was prepared using cordierite as a matrix,and the catalyst was modified with 10%NaOH to study the methanation performance of biomass gasification...In this paper,the Ni/Al_(2)O_(3) monolithic catalyst with 15%Ni content was prepared using cordierite as a matrix,and the catalyst was modified with 10%NaOH to study the methanation performance of biomass gasification simulated gas based on alkali-modified Ni/Al_(2)O_(3) monolithic catalyst.BET,TEM,H_(2)-TPR,XRD,CO_(2)-TPD and TG were used to characterize the physicochemical properties of the catalyst before and after modification.The results indicated that the CO conversion rate trends of unmodified and modified Ni/Al_(2)O_(3) monolithic catalysts over 2 h were fundamentally consistent.However,the Ni/Al_(2)O_(3) catalysts modified for 2 h demonstrated significantly enhanced performance compared to those modified for 1 h.Regarding CH4 selectivity,the modified Ni/Al_(2)O_(3) catalyst exhibited markedly better performance than the unmodified Ni/Al_(2)O_(3) catalyst,confirming the enhanced methane performance of the alkali-modified Ni/Al_(2)O_(3) monolithic catalyst.Under optimized conditions(H_(2)/CO volume ratio of 3∶1,space velocity of 10000 mL/(g·h),and temperature of 400℃),the methanation performance of the Ni/Al_(2)O_(3) monolithic catalyst modified for 2 h reached its peak,achieving a CO conversion rate of 97%with 100%CH4 selectivity.展开更多
Under the backdrop of“Carbon Peak and Carbon Neutrality”(dual carbon)goal in China,the methane-carbon dioxide reforming reaction has attracted considerable attention due to its environmental benefits of converting t...Under the backdrop of“Carbon Peak and Carbon Neutrality”(dual carbon)goal in China,the methane-carbon dioxide reforming reaction has attracted considerable attention due to its environmental benefits of converting two greenhouse gases(methane and carbon dioxide)into syngas and its promising industrial applications.Nickel(Ni)-based catalysts,with high catalytic activity,low cost,and abundant resources,are considered ideal candidates for industrial applications.In this article,three reaction kinetic models were briefly introduced,namely the Power-Law(PL)model,the Eley-Rideal(ER)model,and the Langmuir-Hinshelwood-Hougen-Watson(LHHW)model.Based on the LHHW model,the reaction kinetics and mechanisms of different catalytic systems were systematically discussed,including the properties of supports,the doping of noble metals and transition metals,the role of promoters,and the influence of the geometric and electronic structures of Ni on the reaction mechanism.Furthermore,the kinetics of carbon deposition and elimination on various catalysts were analyzed.Based on the reaction rate expressions for carbon elimination,the reasons for the high activity of transition metal iron(Fe)-doped catalysts and core-shell structured catalysts in carbon elimination were explained.Based on the detailed collation and comparative analysis of the reaction mechanisms and kinetic characteristics across diverse Ni-based catalytic systems,a theoretical guidance for the designing of high-performance catalysts was provided in this work.展开更多
Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen e...Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.展开更多
CuZnAl(CZA)is a classic industrial catalyst widely used for the synthesis of methanol from syngas,but its catalytic performance is not optimal for the hydrogenation of CO_(2) to methanol.Meanwhile,understanding the ca...CuZnAl(CZA)is a classic industrial catalyst widely used for the synthesis of methanol from syngas,but its catalytic performance is not optimal for the hydrogenation of CO_(2) to methanol.Meanwhile,understanding the catalytic mechanism of Cu species in the CZA catalyst remains a great challenge.In this study,we systematically investigated the valence state change of active Cu species in CZA catalyst and their influence on catalytic performance by modifying the catalysts with varying amounts of electron donor K,thus identifying the catalytic function of Cu species with different valence states.H2-TPR,XPS and HR-TEM characterizations reveal that the highly dispersed K species supported on CZA catalysts will inhibit the reduction of CuO,resulting in a small amount of Cu_(2)O active species being produced under reaction conditions thus causing a decrease in catalytic activity.Furthermore,XRD and Cu LMM spectra show that the proportion of Cu^(0) in K-modified CZA catalysts increases with K loading,but a higher proportion of Cu^(0) species on the surface obviously promotes the reverse water gas shift(RWGS)reaction.According to the results of in situ infrared spectroscopy,CZA catalyst follows the reaction pathway mediated by HCOO^(*)in the hydrogenation of CO_(2) to methanol.展开更多
Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catal...Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catalysts,but which substantially involve multi-step,tedious,and difficult synthesis.Herein,this study reports an intriguing approach to construct multi-nuclear catalysts for the milestoneα-diimine nickel catalysts using an oligomeric strategy.A polymerizable norbornene unit is incorporated into theα-diimine ligand backbone,leading to the formation of the monomeric nickel catalyst Ni_(1)and its corresponding oligomeric nickel catalysts(Ni_(3)and Ni_(5))with varying degrees of polymerization(DP=3 and 5).Notably,the oligomeric catalyst Ni_(5)was facilely scaled up(50 g-level),showed enhanced thermal stability,exhibited 4.6 times higher activity,and yielded polyethylene elastomer with a 379%increased molecular weight in ethylene polymerization,compared to the monomeric catalyst Ni_(1).Catalytic performance enhancements of oligomeric catalysts were found to be DP-dependent.The kilogram-scale polyethylene,produced using Ni_(5)in a 20 L reactor,presented a highly branched all-hydrocarbon structure,which demonstrated typical elastic properties(tensile strength:4 MPa,elastic recovery:SR=72%)along with great processability(MFI=3.0 g/10 min),insulating characteristics(volume resistivity=2×10^(16)Ω/m),and hydrophobicity(water vapor permeability:0.03 g/m^(2)/day),suggesting potentially practical applications.展开更多
Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon...Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.展开更多
To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content ...To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.展开更多
Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction...Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.展开更多
The oxygen evolution reaction(OER)suffers from sluggish kinetics,necessitating efficient electrocatalysts to reduce overpotentials in water splitting.Currently recognized OER mechanisms primarily include the adsorbate...The oxygen evolution reaction(OER)suffers from sluggish kinetics,necessitating efficient electrocatalysts to reduce overpotentials in water splitting.Currently recognized OER mechanisms primarily include the adsorbate evolution mechanism(AEM),lattice oxygen mechanism(LOM),and oxide path mechanism(OPM).Compared to AEM,limited by scaling relationships,and LOM,constrained by stability issues,the OPM offers a promising alternative by enabling direct O-O bond formation via dual active sites,thus bypassing^(*)OOH intermediates and lattice O involvement and achieving a balance between activity and durability.However,activating the OPM process requires precise control over the spatial and electronic structure of active sites,making the design of OPM-based catalysts challenging.While previous reviews have focused on homo/heteronuclear diatomic perspectives of OPM-based catalysts,it is urgent to systematically summarize design strategies to provide a rational reference for their development.Herein,a review of design strategies for OPM-based OER catalysts across three scales is comprehensively presented,including in-situ engineering,doping-enabled sites reconstruction,and introducing new sites for nanoparticles,direct synthesis or post-treatments for molecular catalysts,and doping or template strategies for atom pairs or arrays.The unique advantage of atom arrays is also highlighted,and their future research directions and possible strategies are discussed.This review provides a systematic summary and forward-looking perspectives for rationally designing high-performance OPM-based OER catalysts.展开更多
Under the context of global energy transition and carbon neutrality,controlling nitrogen oxide(NO_(x))emissions from biomass combustion is of great significance,and the development of high-efficiency low-temperature c...Under the context of global energy transition and carbon neutrality,controlling nitrogen oxide(NO_(x))emissions from biomass combustion is of great significance,and the development of high-efficiency low-temperature catalysts has become a current research focus.In this study,Nb was used to dope and modify the Mn_(7)-Cu_(3)/BCN catalyst to construct the Mn_(7)-Cu_(3)-Nb_(x)/BCN system.The doping amount was optimized through selective catalytic reduction(SCR)activity tests.The reaction mechanism was explored by combining in situ DRIFTS and density functional theory(DFT)simulations.Experimental findings revealed that the catalyst doped with 0.05%Nb achieved the optimal performance,sustaining a NO conversion efficiency of≥94%within the temperature window of 150−275℃while demonstrating improved resistance to alkali metal K poisoning.Mechanistic analyses showed that at low temperatures,the catalyst facilitated the SCR reaction via both the Eley-Rideal(E-R)and Langmuir-Hinshelwood(L-H)pathways,with the synergistic interaction between multiple active sites driving the efficient conversion of NH3 and NO.DFT calculations further confirmed that both pathways had the characteristics of low reaction energy barriers and significant exothermicity,ensuring the high activity and feasibility of the low-temperature reaction.The findings provided foundational theoretical support for the design of Nb-doped Mn-Cu-supported catalysts and the exploration of the underlying working mechanisms.展开更多
Practical application of lithium-sulfur(Li-S)batteries is hindered by the migration of lithium polysulfides(LiPSs),sluggish conversion kinetics,and anode instability.In these regards,with a novel strategy focusing on ...Practical application of lithium-sulfur(Li-S)batteries is hindered by the migration of lithium polysulfides(LiPSs),sluggish conversion kinetics,and anode instability.In these regards,with a novel strategy focusing on the selective elevation of d-orbitals,Mn/Fe dual-atom catalysts(MnFe DACs)embedded in Ndoped carbon frameworks are designed.Theoretical calculations reveal that energy levels of d_(z2),d_(zx),and d_(yz)orbitals participating in d-p hybridization are elevated closer to the Fermi level at both Mn and Fe sites,thereby reducing orbital occupancy in antibonding states.Consequently,these electronic features via the selective d-orbital elevation enable enhanced adsorption strength toward intermediate LiPSs and accelerate redox reaction during cell operation.Also,the MnFe DAC improves anode stability by regulating Li-ion flux with its lithiophilic active sites.Specifically,the cell equipped with MnFe DAC-modified separator maintains a capacity of 758.4 mAh g^(-1)after 400 cycles at 0.5 C.Notably,the cell demonstrates a high initial capacity of 822.7 mAh g^(-1)with only 0.047%decay rate over 1000 cycles at 1 C.Even under high sulfur-loading(5.0 mg cm^(-2))and low electrolyte-to-sulfur(E/S)ratio(6μL mg^(-1)),a high initial areal capacity of 4.94 m Ah cm^(-2)with 92.5%retention after 50 cycles at 0.1 C is achieved.This study provides guidelines on selective modulation of d-orbitals in DACs for high-performance Li-S batteries.展开更多
基金the Ministry of Science and Technology(MOST),Republic of China(ROC)(No.102WFA0700516)National Central University(No.105G910-9)for fundingfinancial support from the Industrial Technology Research Institute(No.105G910-8)
文摘Double perovskite-type catalysts including La2 CoMnO6 and La2 CuMnO6 are first evaluated for the effectiveness in removing volatile organic compounds（VOCs）, and single perovskites（La CoO3, LaMnO3, and La Cu O3） are also tested for comparison. All perovskites are tested with the gas hourly space velocity（GHSV） of 30,000 hr^-1, and the temperature range of100–600℃ for C7H8 removal. Experimental results indicate that double perovskites have better activity if compared with single perovskites. Especially, toluene（C7H8） can be completely oxidized to CO2 at 300℃ as La2 Co MnO6 is applied. Characterization of catalysts indicates that double perovskites own unique surface properties and are of higher amounts of lattice oxygen,leading to higher activity. Additionally, apparent activation energy of 68 k J/mol is calculated using Mars-van Krevelen model for C7 H8 oxidation with La2 Co Mn O6 as catalyst. For durability test, both La2 Co Mn O6 and La2 CuMnO6 maintain high C7 H8 removal efficiencies of 100% and98%, respectively, at 300℃ and 30,000 hr^-1, and they also show good resistance to CO2（5%） and H2 O（g）（5%） of the gas streams tested. For various VOCs including isopropyl alcohol（C3H8 O）,ethanal（C2H4O）, and ethylene（C2H4） tested, as high as 100% efficiency could be achieved with double perovskite-type catalysts operated at 300–350℃, indicating that double perovskites are promising catalysts for VOCs removal.
基金Sponsored by the National Natural Science Foundation of China(Grant No.20271019 and 20576027), Natural Science Foundation of Heilongjiang Prov-ince(Grant No.B200504), Postdoctoral Foundationof Heilongjiang Province(Grant No.LBH-Z05066) and Education Department Foundation of Hei-longjiang Province(Grant No.11511270).
文摘Iron-based perovskite-type compounds modified by Ru were prepared through sol-gel process to study its catalytic activity of NOx direct decomposition at low temperature and evaluate the conversion of NO under the experimental conditions. The catalytic activity of La 0.9Ce 0.1Fe 0.8-nCo 0.2RunO3 （n=0.01,0.03,0.05,0.07,0.09）series for the NO, NO-CO two components, CO-HC-NO three components were also analyzed. The catalytic investigation evidenced that the presence of Ru is necessary for making highly activity in decomposition of nitric oxide even at low temperature（400 ℃）and La 0.9Ce 0.9Fe 0.75Co 0.2Ru 0.05O3 （n=0.05） has better activity in all the samples, the conversion of it is 58.5%. With the reducing gas（CO,C3H6）added into the gas, the catalyst displayed very high activity in decomposition of NO and the conversion of it is 80% and 92.5% separately.
文摘La<sup>0.8 Cu<sup>0.2 MnO<sup>3±δ perovskite-type catalyst for methane combustion prepared through sol-gel process was characterized by X-ray Diffractometry（XRD）, X-ray Photoelectron Spectroscopy（XPS） and Scanning Electron Microscopy（SEM）. XPS analyses reveal that the surface characteristics of the catalyst are changed. The lattice defects and oxygen vacancies on the catalyst surface are enhanced due to a part of La3+ being substituted by Cu2+ . Temperature-programmed-desorption（TPD） and temperature-programmed-reduction（TPR） analyses were carried out to study the catalytic behavior. It is found that there are two O2-desorption peaks at 350℃ and 650℃ in the TPD pattern, and two CH4-consumption peaks at 420℃ and 750℃ in the TPR patterns respectively, which indicates that the two kinds of oxygen species, so-called α and β oxygen, can react with the methane during catalytic combustion process. The catalytic activity tests were performed in a fixed-bed reactor, and the results show that the T<sup>1/2 at which the conversion of methane attains 50% of La<sup>0.8 Cu<sup>0.2 MnO<sup>3±δ is lower by 55℃ than that of LaMnO3. This indicates that the catalytic activity of-La<sup>0.8 Cu<sup>0.2 MnO<sup>3±δ is increased with partial substitution of Cu2+ for La3+ .-
基金financially supported by the National Natural Science Foundation of China(21968028)the Xinjiang Tianchi Talent Project(CZ002732)。
文摘Alkaline earth-metal titanates ATiO_(3)(A=Ca,Sr,and Ba)with a perovskite-type structure were used as supports for Ru-based catalysts to produce CO_(x)-free H_(2)via NH_(3)decomposition.The effects of alkalineearth metals on the physicochemical characteristics and catalytic activities of Ru/ATiO_(3)for NH_(3)decomposition were investigated using various techniques.The order of Ru/ATiO_(3)for NH_(3)conversion is Ru/BaTiO_(3)>Ru/SrTiO_(3)>Ru/CaTiO_(3)>Ru/TiO_(2)at the identical conditions,with the Ru/BaTiO_(3)catalyst demonstrating the highest NH_(3)conversion of 77.8%at 450℃and a gas hourly space velocity of 30,000 mL/gcat/h,which is 8.7,2.1,and 1.3 times of that over Ru/TiO_(2),Ru/CaTiO_(3),and Ru/SrTiO_(3),respectively.The formation of the ATiO_(3)phase can enrich the concentration of basic sites and oxygen vacancies compared with TiO_(2),which can induce the presence of strong metal-support interaction(SMSI)through the formation of Ru-O-Ti bonds.This SMSI effect increased the dispersion and electron density of Ru nano-particles on ATiO_(3)supports,and the electron-rich Ru nano-particles could weaken the chemisorptive strength of N_(2)and H_(2)on the Ru/ATiO_(3)catalysts,thereby promoting the reaction rate for NH_(3)decomposition.
文摘A series of perovskite type oxides and supported Ag catalysts were prepared, and characterized by X ray diffraction (XRD) and X ray photoelectron spectroscopy (XPS). The catalytic activities of the catalysts as well as influencing factors on catalytic activity have been investigated for the simultaneous removal of NOx and diesel soot particulate. An increase in catalytic activity for the selective reduction of NOx was observed with Ag addition in these perovskite oxides, especially with 5% Ag loading. This catalyst could be a promising candidate of catalytic material for the simultaneous elimination of NOx and diesel soot.
基金financially supported by the Ministry of Science and Technology of China(Grant No.2018YFA0702100)the National Natural Science Foundation of China(Grant Nos.11874169,51972129)+3 种基金the National Key R&D Program of China(Grant No.2017YFE0120500)the Key Research and Development Program of Hubei(Grant No.2020BAB079)the South Xinjiang Innovation and Development Program of Key Industries of Xinjiang Production and Construction Corps(Grants No.2020DB002)the Hubei‘‘Chu-Tian Young Scholar”program.
文摘Clean energy and a sustainable environment are grand challenges that the world is facing which can be addressed by converting solar energy into transportable and storable fuels(chemical fuel).The main scientific and technological challenges for efficient solar energy conversion,energy storage,and environmental applications are the stability,durability,and performance of low-cost functional materials.Among different nanomaterials,perovskite type LaFeO_(3)has been extensively investigated as a photocatalyst due to its abundance,high stability,compositional and structural fexibility,high electrocatalytic activity,efficient sunlight absorption,and tunable band gap and band edges.Hence,it is urgent to write a comprehensive review to highlight the trend,challenges,and prospects of LaFeO_(3)in the field of photocatalytic solar energy conversion and environment purification.This critical review summarizes the history and basic principles of photocatalysis.Further,it reviews in detail the LaFeO_(3),applications,shortcomings,and activity enhancement strategies including the design of nanostructures,elemental doping,and heterojunctions construction such as Type-I,Type-II,Z-Type,and uncommon heterojunctions.Besides,the optical and electronic properties,charge carriers separation,electron transport phenomenon and alignment of the band gaps in LaFeO_(3)-based heterostructures are comprehensively discussed.
基金supported by the National Natural Science Foundation of China (20833011 and 20803093)the 863 Project of China (2006AA06Z346)
文摘A facile procedure was carried out to prepare macroporous perovskite-type complex oxide catalysts of La1–xKxCo1–yFeyO3(x=0,0.1,y=0,0.1) by using the combined method of organic ligation and solution combustion.This method could ensure the formation of the desired macroporous structures and the desired crystal phases of the prepared catalysts.It was found that the macroporous catalysts showed higher catalytic activities for soot combustion than that of the corresponding nanometric samples,and the macroporous ...
文摘I.INTRODUCTION The perovskite-type compounds, as one kind of new functional materials has received more and more attention owing to their perfect crystal structure, unique electromagnetic properties, and high catalytic activities for oxidation and hydrogena-
基金Supported by National Key R&D Program of China(2022YFA1503400)。
文摘Aiming at the problems of insufficient activity and selectivity of Cu-based catalysts in CO_(2)hydrogenation to methanol,Al_(2)O_(3),ZrO_(2)and CeO_(2)modified Cu-ZnO catalysts by the co-precipitation method were prepared,and the influence mechanism of additives on the structure-performance relationship of the catalysts was systematically explored.Through a variety of characterization methods such as XRD,N2 physical adsorption-desorption,TEM,H_(2)-TPR,CO_(2)-TPD and XPS,combined with catalytic performance evaluation experiments,the correlation between the microstructure of catalysts and the reaction performance of CO_(2)hydrogenation to methanol was analyzed in depth.The results show that metal additives significantly improve the performance of catalysts.After the introduction of additives,the specific surface area and pore volume of the catalysts increase,the grain size of Cu decreases,and its dispersion improves.The Ce-modified CZC catalyst exhibited the best performance,with the grain size of CuO as small as 11.41 nm,and the surface oxygen vacancy concentration(OⅡ/OⅠ=3.15)was significantly higher than that of other samples.The reaction performance test shows that under the conditions of 2.8 MPa,8000 h−1 and 280℃,the CO_(2)conversion of the CZC catalyst reached 18.83%,the methanol selectivity was 68.40%,and the methanol yield was 12.88%,all of which are superior to other catalysts.Its excellent performance can be attributed to the fact that CeO_(2)enhances the metal-support interaction,increases the surface basicity,promotes the adsorption and activation of CO_(2),and simultaneously inhibits the reverse water-gas shift side reaction.This study clarifies the structure-activity regulation mechanism of additive modification on Cu-ZnO catalysts,providing a theoretical basis and technical reference for the development of efficient catalysts for CO_(2)hydrogenation to methanol.
基金Supported by the National Natural Science Foundation of China(52506188,52476215)Natural Science Foundation of Liaoning Province(2024-MS-139,2024JH3/10200047)Scientific Research Program of Department of Education of Liaoning Province(310125042,LJ212410143033)。
文摘In this paper,the Ni/Al_(2)O_(3) monolithic catalyst with 15%Ni content was prepared using cordierite as a matrix,and the catalyst was modified with 10%NaOH to study the methanation performance of biomass gasification simulated gas based on alkali-modified Ni/Al_(2)O_(3) monolithic catalyst.BET,TEM,H_(2)-TPR,XRD,CO_(2)-TPD and TG were used to characterize the physicochemical properties of the catalyst before and after modification.The results indicated that the CO conversion rate trends of unmodified and modified Ni/Al_(2)O_(3) monolithic catalysts over 2 h were fundamentally consistent.However,the Ni/Al_(2)O_(3) catalysts modified for 2 h demonstrated significantly enhanced performance compared to those modified for 1 h.Regarding CH4 selectivity,the modified Ni/Al_(2)O_(3) catalyst exhibited markedly better performance than the unmodified Ni/Al_(2)O_(3) catalyst,confirming the enhanced methane performance of the alkali-modified Ni/Al_(2)O_(3) monolithic catalyst.Under optimized conditions(H_(2)/CO volume ratio of 3∶1,space velocity of 10000 mL/(g·h),and temperature of 400℃),the methanation performance of the Ni/Al_(2)O_(3) monolithic catalyst modified for 2 h reached its peak,achieving a CO conversion rate of 97%with 100%CH4 selectivity.
基金Supported by Innovation Capability Support Program of Shaanxi(2024RS-CXTD-53,2024ZC-KJXX-096)the Key R&D Program of Shaanxi Province(2022QCY-LL-69)Xi’an Science and Technology Project(24GXFW0089)。
文摘Under the backdrop of“Carbon Peak and Carbon Neutrality”(dual carbon)goal in China,the methane-carbon dioxide reforming reaction has attracted considerable attention due to its environmental benefits of converting two greenhouse gases(methane and carbon dioxide)into syngas and its promising industrial applications.Nickel(Ni)-based catalysts,with high catalytic activity,low cost,and abundant resources,are considered ideal candidates for industrial applications.In this article,three reaction kinetic models were briefly introduced,namely the Power-Law(PL)model,the Eley-Rideal(ER)model,and the Langmuir-Hinshelwood-Hougen-Watson(LHHW)model.Based on the LHHW model,the reaction kinetics and mechanisms of different catalytic systems were systematically discussed,including the properties of supports,the doping of noble metals and transition metals,the role of promoters,and the influence of the geometric and electronic structures of Ni on the reaction mechanism.Furthermore,the kinetics of carbon deposition and elimination on various catalysts were analyzed.Based on the reaction rate expressions for carbon elimination,the reasons for the high activity of transition metal iron(Fe)-doped catalysts and core-shell structured catalysts in carbon elimination were explained.Based on the detailed collation and comparative analysis of the reaction mechanisms and kinetic characteristics across diverse Ni-based catalytic systems,a theoretical guidance for the designing of high-performance catalysts was provided in this work.
基金Supported by the National Natural Science Foundation of China(No.52273056)the Science and Technology Development Program of Jilin Province,China(No.YDZJ202501ZYTS305)。
文摘Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.
基金Supported by the National Key Research and Development Program of China(2022YFB4101800)the National Natural Science Foundation of China(22172032,U22A20431)。
文摘CuZnAl(CZA)is a classic industrial catalyst widely used for the synthesis of methanol from syngas,but its catalytic performance is not optimal for the hydrogenation of CO_(2) to methanol.Meanwhile,understanding the catalytic mechanism of Cu species in the CZA catalyst remains a great challenge.In this study,we systematically investigated the valence state change of active Cu species in CZA catalyst and their influence on catalytic performance by modifying the catalysts with varying amounts of electron donor K,thus identifying the catalytic function of Cu species with different valence states.H2-TPR,XPS and HR-TEM characterizations reveal that the highly dispersed K species supported on CZA catalysts will inhibit the reduction of CuO,resulting in a small amount of Cu_(2)O active species being produced under reaction conditions thus causing a decrease in catalytic activity.Furthermore,XRD and Cu LMM spectra show that the proportion of Cu^(0) in K-modified CZA catalysts increases with K loading,but a higher proportion of Cu^(0) species on the surface obviously promotes the reverse water gas shift(RWGS)reaction.According to the results of in situ infrared spectroscopy,CZA catalyst follows the reaction pathway mediated by HCOO^(*)in the hydrogenation of CO_(2) to methanol.
基金financial support from the National Natural Science Foundation of China(Nos.22401274,U23B6011)the Jilin Provincial Science and Technology Department Program(No.20250102070JC)。
文摘Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catalysts,but which substantially involve multi-step,tedious,and difficult synthesis.Herein,this study reports an intriguing approach to construct multi-nuclear catalysts for the milestoneα-diimine nickel catalysts using an oligomeric strategy.A polymerizable norbornene unit is incorporated into theα-diimine ligand backbone,leading to the formation of the monomeric nickel catalyst Ni_(1)and its corresponding oligomeric nickel catalysts(Ni_(3)and Ni_(5))with varying degrees of polymerization(DP=3 and 5).Notably,the oligomeric catalyst Ni_(5)was facilely scaled up(50 g-level),showed enhanced thermal stability,exhibited 4.6 times higher activity,and yielded polyethylene elastomer with a 379%increased molecular weight in ethylene polymerization,compared to the monomeric catalyst Ni_(1).Catalytic performance enhancements of oligomeric catalysts were found to be DP-dependent.The kilogram-scale polyethylene,produced using Ni_(5)in a 20 L reactor,presented a highly branched all-hydrocarbon structure,which demonstrated typical elastic properties(tensile strength:4 MPa,elastic recovery:SR=72%)along with great processability(MFI=3.0 g/10 min),insulating characteristics(volume resistivity=2×10^(16)Ω/m),and hydrophobicity(water vapor permeability:0.03 g/m^(2)/day),suggesting potentially practical applications.
基金Supported by the National Key Research and Development Program of China(2023YFB4104500,2023YFB4104502)the National Natural Science Foundation of China(22138013)the Taishan Scholar Project(ts201712020).
文摘Against the backdrop of escalating global climate change and energy crises,the resource utilization of carbon dioxide(CO_(2)),a major greenhouse gas,has become a crucial pathway for achieving carbon peaking and carbon neutrality goals.The hydrogenation of CO_(2)to methanol not only enables carbon sequestration and recycling,but also provides a route to produce high value-added fuels and basic chemical feedstocks,holding significant environmental and economic potential.However,this conversion process is thermodynamically and kinetically limited,and traditional catalyst systems(e.g.,Cu/ZnO/Al_(2)O_(3))exhibit inadequate activity,selectivity,and stability under mild conditions.Therefore,the development of novel high-performance catalysts with precisely tunable structures and functionalities is imperative.Metal-organic frameworks(MOFs),as crystalline porous materials with high surface area,tunable pore structures,and diverse metal-ligand compositions,have the great potential in CO_(2)hydrogenation catalysis.Their structural design flexibility allows for the construction of well-dispersed active sites,tailored electronic environments,and enhanced metal-support interactions.This review systematically summarizes the recent advances in MOF-based and MOF-derived catalysts for CO_(2)hydrogenation to methanol,focusing on four design strategies:(1)spatial confinement and in situ construction,(2)defect engineering and ion-exchange,(3)bimetallic synergy and hybrid structure design,and(4)MOF-derived nanomaterial synthesis.These approaches significantly improve CO_(2)conversion and methanol selectivity by optimizing metal dispersion,interfacial structures,and reaction pathways.The reaction mechanism is further explored by focusing on the three main reaction pathways:the formate pathway(HCOO*),the RWGS(Reverse Water Gas Shift reaction)+CO*hydrogenation pathway,and the trans-COOH pathway.In situ spectroscopic studies and density functional theory(DFT)calculations elucidate the formation and transformation of key intermediates,as well as the roles of active sites,metal-support interfaces,oxygen vacancies,and promoters.Additionally,representative catalytic performance data for MOFbased systems are compiled and compared,demonstrating their advantages over traditional catalysts in terms of CO_(2)conversion,methanol selectivity,and space-time yield.Future perspectives for MOF-based CO_(2)hydrogenation catalysts will prioritize two main directions:structural design and mechanistic understanding.The precise construction of active sites through multi-metallic synergy,defect engineering,and interfacial electronic modulation should be made to enhance catalyst selectivity and stability.In addition,advanced in situ characterization techniques combined with theoretical modeling are essential to unravel the detailed reaction mechanisms and intermediate behaviors,thereby guiding rational catalyst design.Moreover,to enable industrial application,challenges related to thermal/hydrothermal stability,catalyst recyclability,and cost-effective large-scale synthesis must be addressed.The development of green,scalable preparation methods and the integration of MOF catalysts into practical reaction systems(e.g.,flow reactors)will be crucial for bridging the gap between laboratory research and commercial deployment.Ultimately,multi-scale structure-performance optimization and catalytic system integration will be vital for accelerating the industrialization of MOF-based CO_(2)-to-methanol technologies.
基金Supported by the Science and Technology Cooperation and Exchange special project of Cooperation of Shanxi Province(202404041101014)the Fundamental Research Program of Shanxi Province(202403021212333)+3 种基金the Joint Funds of the National Natural Science Foundation of China(U24A20555)the Lvliang Key R&D of University-Local Cooperation(2023XDHZ10)the Initiation Fund for Doctoral Research of Taiyuan University of Science and Technology(20242026)the Outstanding Doctor Funding Award of Shanxi Province(20242080).
文摘To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.
基金funded by the Innovative Research Group Project of the National Natural Science Foundation of China(52121004)the Research Development Fund(No.RDF-21-02-060)by Xi’an Jiaotong-Liverpool University+1 种基金support received from the Suzhou Industrial Park High Quality Innovation Platform of Functional Molecular Materials and Devices(YZCXPT2023105)the XJTLU Advanced Materials Research Center(AMRC).
文摘Seawater zinc-air batteries are promising energy storage devices due to their high energy density and utilization of seawater electrolytes.However,their efficiency is hindered by the sluggish oxygen reduction reaction(ORR)and chlorideinduced degradation over conventional catalysts.In this study,we proposed a universal synthetic strategy to construct heteroatom axially coordinated Fe–N_(4) single-atom seawater catalyst materials(Cl–Fe–N_(4) and S–Fe–N_(4)).X-ray absorption spectroscopy confirmed their five-coordinated square pyramidal structure.Systematic evaluation of catalytic activities revealed that compared with S–Fe–N_(4),Cl–Fe–N_(4) exhibits smaller electrochemical active surface area and specific surface area,yet demonstrates higher limiting current density(5.8 mA cm^(−2)).The assembled zinc-air batteries using Cl–Fe–N_(4) showed superior power density(187.7 mW cm^(−2) at 245.1 mA cm^(−2)),indicating that Cl axial coordination more effectively enhances the intrinsic ORR activity.Moreover,Cl–Fe–N_(4) demonstrates stronger Cl−poisoning resistance in seawater environments.Chronoamperometry tests and zinc-air battery cycling performance evaluations confirmed its enhanced stability.Density functional theory calculations revealed that the introduction of heteroatoms in the axial direction regulates the electron center of Fe single atom,leading to more active reaction intermediates and increased electron density of Fe single sites,thereby enhancing the reduction in adsorbed intermediates and hence the overall ORR catalytic activity.
基金funding from the National Natural Science Foundation of China(22378289)the Key Central Government Guides Local Funds for Science and Technology Development(YDZJSX2022A021)the special fund for Science and Technology Innovation Teams of Shanxi Province(202304051001026)。
文摘The oxygen evolution reaction(OER)suffers from sluggish kinetics,necessitating efficient electrocatalysts to reduce overpotentials in water splitting.Currently recognized OER mechanisms primarily include the adsorbate evolution mechanism(AEM),lattice oxygen mechanism(LOM),and oxide path mechanism(OPM).Compared to AEM,limited by scaling relationships,and LOM,constrained by stability issues,the OPM offers a promising alternative by enabling direct O-O bond formation via dual active sites,thus bypassing^(*)OOH intermediates and lattice O involvement and achieving a balance between activity and durability.However,activating the OPM process requires precise control over the spatial and electronic structure of active sites,making the design of OPM-based catalysts challenging.While previous reviews have focused on homo/heteronuclear diatomic perspectives of OPM-based catalysts,it is urgent to systematically summarize design strategies to provide a rational reference for their development.Herein,a review of design strategies for OPM-based OER catalysts across three scales is comprehensively presented,including in-situ engineering,doping-enabled sites reconstruction,and introducing new sites for nanoparticles,direct synthesis or post-treatments for molecular catalysts,and doping or template strategies for atom pairs or arrays.The unique advantage of atom arrays is also highlighted,and their future research directions and possible strategies are discussed.This review provides a systematic summary and forward-looking perspectives for rationally designing high-performance OPM-based OER catalysts.
基金Supported by National Key Research and Development Program of China(2020YFD1100302)。
文摘Under the context of global energy transition and carbon neutrality,controlling nitrogen oxide(NO_(x))emissions from biomass combustion is of great significance,and the development of high-efficiency low-temperature catalysts has become a current research focus.In this study,Nb was used to dope and modify the Mn_(7)-Cu_(3)/BCN catalyst to construct the Mn_(7)-Cu_(3)-Nb_(x)/BCN system.The doping amount was optimized through selective catalytic reduction(SCR)activity tests.The reaction mechanism was explored by combining in situ DRIFTS and density functional theory(DFT)simulations.Experimental findings revealed that the catalyst doped with 0.05%Nb achieved the optimal performance,sustaining a NO conversion efficiency of≥94%within the temperature window of 150−275℃while demonstrating improved resistance to alkali metal K poisoning.Mechanistic analyses showed that at low temperatures,the catalyst facilitated the SCR reaction via both the Eley-Rideal(E-R)and Langmuir-Hinshelwood(L-H)pathways,with the synergistic interaction between multiple active sites driving the efficient conversion of NH3 and NO.DFT calculations further confirmed that both pathways had the characteristics of low reaction energy barriers and significant exothermicity,ensuring the high activity and feasibility of the low-temperature reaction.The findings provided foundational theoretical support for the design of Nb-doped Mn-Cu-supported catalysts and the exploration of the underlying working mechanisms.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(RS-2024-00355916)by the NRF grant funded by the Korea government(MSIT)(RS-2021-NR060090)by the Korea Institute for Advancement of Technology(KIAT)grant funded by the Korea Government(MOTIE)(RS-2024-00419413,HRD Program for Industrial Innovation)。
文摘Practical application of lithium-sulfur(Li-S)batteries is hindered by the migration of lithium polysulfides(LiPSs),sluggish conversion kinetics,and anode instability.In these regards,with a novel strategy focusing on the selective elevation of d-orbitals,Mn/Fe dual-atom catalysts(MnFe DACs)embedded in Ndoped carbon frameworks are designed.Theoretical calculations reveal that energy levels of d_(z2),d_(zx),and d_(yz)orbitals participating in d-p hybridization are elevated closer to the Fermi level at both Mn and Fe sites,thereby reducing orbital occupancy in antibonding states.Consequently,these electronic features via the selective d-orbital elevation enable enhanced adsorption strength toward intermediate LiPSs and accelerate redox reaction during cell operation.Also,the MnFe DAC improves anode stability by regulating Li-ion flux with its lithiophilic active sites.Specifically,the cell equipped with MnFe DAC-modified separator maintains a capacity of 758.4 mAh g^(-1)after 400 cycles at 0.5 C.Notably,the cell demonstrates a high initial capacity of 822.7 mAh g^(-1)with only 0.047%decay rate over 1000 cycles at 1 C.Even under high sulfur-loading(5.0 mg cm^(-2))and low electrolyte-to-sulfur(E/S)ratio(6μL mg^(-1)),a high initial areal capacity of 4.94 m Ah cm^(-2)with 92.5%retention after 50 cycles at 0.1 C is achieved.This study provides guidelines on selective modulation of d-orbitals in DACs for high-performance Li-S batteries.
