Peritectic reaction was studied by directional solidification of Cu-Ge alloys.A larger triple junction region of peritectic reaction was used to analyze the interface stability of the triple junction region during per...Peritectic reaction was studied by directional solidification of Cu-Ge alloys.A larger triple junction region of peritectic reaction was used to analyze the interface stability of the triple junction region during peritectic reaction.Under different growth conditions and compositions,different growth morphologies of triple junction region are presented.For the hypoperitectic Cu-13.5%Ge alloy,as the pulling velocity（v） increases from 2 to 5 μm/s,the morphological instability of the peritectic phase occurs during the peritectic reaction and the remelting interface of the primary phase is relatively stable.However,for the hyperperitectic Cu-15.6%Ge alloy wim v=5 μm/s,the nonplanar remelting interface near the trijunction is presented.The morphological stabilities of the solidifying peritectic phase and the remelting primary phase are analyzed in terms of the constitutional undercooling criterion.展开更多
The effect of a high magnetic field on the microstructural evolution of a peritectic Al—18 at.%Ni alloy during directional solidification and its dependence on pulling speed were investigated.At a low pulling speed,t...The effect of a high magnetic field on the microstructural evolution of a peritectic Al—18 at.%Ni alloy during directional solidification and its dependence on pulling speed were investigated.At a low pulling speed,the application of a 2 T magnetic field triggered the appearance of a primary Al_(3)Ni_(2)phase.At higher pulling speeds,a high magnetic field application induced primary Al_(3)Ni_(2)phase segregation that formed close to the central alloy regions.For all pulling speeds,the application of a high magnetic field induced bulk Al_(3)Ni/Al eutectic formation on the upper and lower parts of the alloys,and promoted elongated growth of the peritectic Al_3Ni phase along the magnetic field direction.Microstructural analysis indicated that microstructural evolution that was induced by high magnetic fields can be attributed to solute migration and melt flow that is regulated by magnetic,Lorentz,and thermoelectric magnetic forces and their coupling effects during peritectic solidification.展开更多
In order to achieve fine debismuthizing of lead bullion,the effects of temperature,adding amount of calcium and magnesium and antimony on the bismuth removal from lead bullion were investigated.The mechanism of debism...In order to achieve fine debismuthizing of lead bullion,the effects of temperature,adding amount of calcium and magnesium and antimony on the bismuth removal from lead bullion were investigated.The mechanism of debismuthizing was also discussed.The results show that when adding amounts of calcium and magnesium reach 0.112% and 0.395%,respectively,bismuth level of 0.001%（mass fraction） in the final lead is achieved at 330 ℃,without the need for antimony addition.Maintaining addition amount of magnesium at 0.155%,when calcium addition amount is less than 0.09%,the concentration of peritectic reaction point,the bismuth concentration can be easily decreased to 0.001% by the following antimony treatment.But the effect of antimony treatment on debismuthizing gets bad if the calcium addition exceeds 0.09%.展开更多
The effect of A1 content on the microstructure and solidification characteristics of Ti-A1-Nb-V-Cr alloys in as-cast and isothermally treated states was investigated using X-ray diffraction （XRD）, scanning electron ...The effect of A1 content on the microstructure and solidification characteristics of Ti-A1-Nb-V-Cr alloys in as-cast and isothermally treated states was investigated using X-ray diffraction （XRD）, scanning electron microscopy （SEM） equipped with energy dispersive spectroscope （EDS）, and transmission electron microscopy （TEM）. The typical solidification characteristics are due to the joint influence of both the crystal temperature range and the solidification path. The wide crystallization temperature range contributes to obtaining coarse dendrites in the as-cast Ti47A17Nb2.5V1.0Cr （at%） alloy solidifying through the peritectic reaction. The β-solidifying Ti46A17Nb2.5V1.0Cr （at%） alloy with the narrow crystallization temperature range is attributed to the formation of a homogeneous finegrained microstructure. However, the crystallization temperature range of Ti48A17Nb2.5V1.0Cr （at%） alloy is equivalent to that of Ti46A17Nb2.5V1.0Cr alloy, but it is solidified by peritectic reaction, leading to the formation of finer dendrites.展开更多
The microstructure formation and mechanical property involving icosahedral quasicrystal （I-phase） in the Y-rich Mg-Zn-Y alloy have been studied. The equilibrium formation of I-phase from the Y-rich Mg-Zn-Y melt is ...The microstructure formation and mechanical property involving icosahedral quasicrystal （I-phase） in the Y-rich Mg-Zn-Y alloy have been studied. The equilibrium formation of I-phase from the Y-rich Mg-Zn-Y melt is through a peritectic reaction between the Y-rich melt and the primary W-phase, which is discussed in detail. The independent nucleation and coupling growth mechanism between the W-phase and the I-phase, from the melt, are revealed, which is significant for understanding the peritectic reaction process involving icosahedral quasicrystal in the Mg-Zn-Y alloy. The mechanism of the quasicrystal phase strengthened magnesium alloys is also discussed here.展开更多
The microstructure evolution of Ti-47Al-2Cr-2Nb alloy was investigated on liquid metal cooling type directional solidified apparatus at high temperature gradient.The analysis shows that it is solidified with primary ...The microstructure evolution of Ti-47Al-2Cr-2Nb alloy was investigated on liquid metal cooling type directional solidified apparatus at high temperature gradient.The analysis shows that it is solidified with primary β cells/dendrites,and then α phase is formed through peritectic reaction.Once the columnar grains grow into the steady state,the lamellar orientation inclined with the angle of 45° to the withdrawal direction is more favored than that with parallel to the withdrawal direction.In addition,α phase grain nucleates from β-interdendrite regions,and grows up to the dendritic trunk.If no other α grain hinders its growth,it would occupy the whole dendrite,or it would stop at the dendritic trunk for the weakened motivating drive in the β dendritic core.展开更多
基金Projects (50901025,50975060,51331005) supported by the National Natural Science Foundation of ChinaProject (2011CB610406) supported by the National Basic Research Program of China+2 种基金Projects (201104420,20090450840) supported by China Postdoctoral Science FoundationProject (JC201209) supported by Outstanding Young Scientist Foundation of Heilongjiang Province,ChinaProject (HIT.BRET1.20100008) supported by the Fundamental Research Funds for Central Universities,China
文摘Peritectic reaction was studied by directional solidification of Cu-Ge alloys.A larger triple junction region of peritectic reaction was used to analyze the interface stability of the triple junction region during peritectic reaction.Under different growth conditions and compositions,different growth morphologies of triple junction region are presented.For the hypoperitectic Cu-13.5%Ge alloy,as the pulling velocity（v） increases from 2 to 5 μm/s,the morphological instability of the peritectic phase occurs during the peritectic reaction and the remelting interface of the primary phase is relatively stable.However,for the hyperperitectic Cu-15.6%Ge alloy wim v=5 μm/s,the nonplanar remelting interface near the trijunction is presented.The morphological stabilities of the solidifying peritectic phase and the remelting primary phase are analyzed in terms of the constitutional undercooling criterion.
基金the National Natural Science Foundation of China(Nos.51690161,51774086,and 21701022)the Fundamental Research Funds for the Central Universities(Nos.N180915002,N170902002 and N170908001)Liaoning Innovative Research Team in University,China(No.LT2017011)。
文摘The effect of a high magnetic field on the microstructural evolution of a peritectic Al—18 at.%Ni alloy during directional solidification and its dependence on pulling speed were investigated.At a low pulling speed,the application of a 2 T magnetic field triggered the appearance of a primary Al_(3)Ni_(2)phase.At higher pulling speeds,a high magnetic field application induced primary Al_(3)Ni_(2)phase segregation that formed close to the central alloy regions.For all pulling speeds,the application of a high magnetic field induced bulk Al_(3)Ni/Al eutectic formation on the upper and lower parts of the alloys,and promoted elongated growth of the peritectic Al_3Ni phase along the magnetic field direction.Microstructural analysis indicated that microstructural evolution that was induced by high magnetic fields can be attributed to solute migration and melt flow that is regulated by magnetic,Lorentz,and thermoelectric magnetic forces and their coupling effects during peritectic solidification.
文摘In order to achieve fine debismuthizing of lead bullion,the effects of temperature,adding amount of calcium and magnesium and antimony on the bismuth removal from lead bullion were investigated.The mechanism of debismuthizing was also discussed.The results show that when adding amounts of calcium and magnesium reach 0.112% and 0.395%,respectively,bismuth level of 0.001%（mass fraction） in the final lead is achieved at 330 ℃,without the need for antimony addition.Maintaining addition amount of magnesium at 0.155%,when calcium addition amount is less than 0.09%,the concentration of peritectic reaction point,the bismuth concentration can be easily decreased to 0.001% by the following antimony treatment.But the effect of antimony treatment on debismuthizing gets bad if the calcium addition exceeds 0.09%.
基金financially supported by the National Basic Research Program of China(No.2011CB605503)the Program of Introducing Talents of Discipline to Universities(No.B08040)
文摘The effect of A1 content on the microstructure and solidification characteristics of Ti-A1-Nb-V-Cr alloys in as-cast and isothermally treated states was investigated using X-ray diffraction （XRD）, scanning electron microscopy （SEM） equipped with energy dispersive spectroscope （EDS）, and transmission electron microscopy （TEM）. The typical solidification characteristics are due to the joint influence of both the crystal temperature range and the solidification path. The wide crystallization temperature range contributes to obtaining coarse dendrites in the as-cast Ti47A17Nb2.5V1.0Cr （at%） alloy solidifying through the peritectic reaction. The β-solidifying Ti46A17Nb2.5V1.0Cr （at%） alloy with the narrow crystallization temperature range is attributed to the formation of a homogeneous finegrained microstructure. However, the crystallization temperature range of Ti48A17Nb2.5V1.0Cr （at%） alloy is equivalent to that of Ti46A17Nb2.5V1.0Cr alloy, but it is solidified by peritectic reaction, leading to the formation of finer dendrites.
基金the National Natural Science Foundation of China(Nos.50571081,50671083)Aeronautical Foundation of China(No.04G53042).
文摘The microstructure formation and mechanical property involving icosahedral quasicrystal （I-phase） in the Y-rich Mg-Zn-Y alloy have been studied. The equilibrium formation of I-phase from the Y-rich Mg-Zn-Y melt is through a peritectic reaction between the Y-rich melt and the primary W-phase, which is discussed in detail. The independent nucleation and coupling growth mechanism between the W-phase and the I-phase, from the melt, are revealed, which is significant for understanding the peritectic reaction process involving icosahedral quasicrystal in the Mg-Zn-Y alloy. The mechanism of the quasicrystal phase strengthened magnesium alloys is also discussed here.
文摘The microstructure evolution of Ti-47Al-2Cr-2Nb alloy was investigated on liquid metal cooling type directional solidified apparatus at high temperature gradient.The analysis shows that it is solidified with primary β cells/dendrites,and then α phase is formed through peritectic reaction.Once the columnar grains grow into the steady state,the lamellar orientation inclined with the angle of 45° to the withdrawal direction is more favored than that with parallel to the withdrawal direction.In addition,α phase grain nucleates from β-interdendrite regions,and grows up to the dendritic trunk.If no other α grain hinders its growth,it would occupy the whole dendrite,or it would stop at the dendritic trunk for the weakened motivating drive in the β dendritic core.
