Source properties and stress fields are critical to understand fundamental mechanisms for fluid-induced earthquakes.In this study,we identify the focal mechanism solutions(FMSs)of 360 earthquakes with local magnitude ...Source properties and stress fields are critical to understand fundamental mechanisms for fluid-induced earthquakes.In this study,we identify the focal mechanism solutions(FMSs)of 360 earthquakes with local magnitude M_(L)≥1.5 in the Changning shale gas field from January 2016 to May 2017 by fitting three-component waveforms.We then constrain the directions of the maximum horizontal stress(σ_(H_(max)))for four dense earthquake clusters using the stress tensor inversion method.The stress drops of 121 earthquakes with M_(L)≥1.5 are calculated using the spectral ratio method.We examine the spatiotemporal heterogeneity of stress field,and discuss the cause of non-double-couple(non-DC)components in seismicity clusters.Following the Mohr-Coulomb criterion,we estimate the fluid overpressure thresholds from FMS for different seismic clusters,providing insights into potential physical mechanisms for induced seismicity.The FMS results indicate that shallow reverse earthquakes,with steep dip angles,characterize most events.The source mechanisms of earthquakes with M_(L)≥1.5 are dominated by DC components(>70%),but several earthquakes with M_(L)>3.0 and the microseismic events nearby during injection period display significant non-DC components(>30%).Stress inversion results reveal that the σ_(H_(max)) direction ranges from 120°to 128°.Stress drops of earthquakes range between 0.10 and 64.49 MPa,with high values occurring on reverse faults situated at a greater distance from the shale layer,accompanied by a moderate rotation(≤25°)in the trend of σ_(H_(max)).The seismic clusters close to the shale layer exhibit low fluid overpressure thresholds,prone to being triggered by high pore-pressure fluid.The integrated results suggest that the diffusion of high pore pressures is likely to be the primary factor for observed earthquakes.The present results are expected to offer valuable insights into the origin of anomalous seismicity near the shale gas sites.展开更多
Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hyd...Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hydraulic fracturing process in lab-scale coal samples with DFNs and the induced seismic activities by the discrete element method(DEM).The effects of DFNs on hydraulic fracturing,induced seismicity and elastic property changes have been concluded.Denser DFNs can comprehensively decrease the peak injection pressure and injection duration.The proportion of strong seismic events increases first and then decreases with increasing DFN density.In addition,the relative modulus of the rock mass is derived innovatively from breakdown pressure,breakdown fracture length and the related initiation time.Increasing DFN densities among large(35–60 degrees)and small(0–30 degrees)fracture dip angles show opposite evolution trends in relative modulus.The transitional point(dip angle)for the opposite trends is also proportionally affected by the friction angle of the rock mass.The modelling results have much practical meaning to infer the density and geometry of pre-existing fractures and the elastic property of rock mass in the field,simply based on the hydraulic fracturing and induced seismicity monitoring data.展开更多
The Chilean subduction zone is one of the most seismically active regions globally,characterized by extensive intermediatedepth seismicity in the slab.In this study,we construct a new earthquake catalog for northern C...The Chilean subduction zone is one of the most seismically active regions globally,characterized by extensive intermediatedepth seismicity in the slab.In this study,we construct a new earthquake catalog for northern Chile using seismic waveforms assembled for the period of 2014-2019,from which 320,070 P-wave and 232,907 S-wave first arrivals are obtained for 25,763 earthquakes.Grid search location method NonLinLoc is applied to determine initial earthquake locations and double-difference location method is used to improve relative event locations.The distribution of earthquakes exhibits distinct patterns to the north and south of 21°S.There are many more earthquakes deeper than~150 km to the south of 21°S,while relatively fewer to the north.The intraslab earthquakes shallower than~80 km generally reveal a distinct double seismic zone,and the gap between the two seismic planes disappears at a depth of approximately~80 km,followed by a concentration of seismicity in the depth range of~80-150 km.In the deeper slab,there exist several seismicity clusters with distinct earthquake activities down to~300 km.These characteristics shown in slab seismicity are likely caused by different mechanisms and can be helpful for understanding the subduction process.展开更多
The occurrence time and magnitude of injection-induced seismicity are influenced by engineering factors,such as wellhead pressure,injection location,injection volume,and injection rate.Understanding the relationship b...The occurrence time and magnitude of injection-induced seismicity are influenced by engineering factors,such as wellhead pressure,injection location,injection volume,and injection rate.Understanding the relationship between injection operations and seismic magnitude is of great significance for optimizing industrial production and reducing earthquake disasters.Numerical simulation of hydromechanical coupling is a crucial method for studying injection-induced seismicity.However,few studies have explored the risk management measures for injection-induced seismicity from the perspective of engineering.How seismic magnitudes can be reduced through reasonable adjustments to injection operations in engineering remains unclear.Therefore,in this study,a 3D hydro-mechanical coupling model involving multiple faults and injection wells was established based on the geological background and well location of Fox Creek,Canada.Different injection schemes under multi-well and multi-fault conditions were studied,and a traffic light system was used to simulate and control the magnitudes under a multi-well injection scheme.Specifically,we simulated injection scenarios involving up to three wells and analyzed the response of five faults.We compared the maximum moment magnitude of different scenarios by controlling the same injection volume.The results revealed the effect and advantage of the multi-well scheme in reducing seismic magnitude.To reduce the risk of induced seismicity,utilizing far-fault operational wells to compensate for the effects of near-fault operational wells proves to be an efficient and cost-effective method,with potential for wide practical applications.展开更多
Triggered seismicity is a key hazard where fluids are injected or withdrawn from the subsurface and may impact permeability. Understanding the mechanisms that control fluid injection-triggered seismicity allows its mi...Triggered seismicity is a key hazard where fluids are injected or withdrawn from the subsurface and may impact permeability. Understanding the mechanisms that control fluid injection-triggered seismicity allows its mitigation. Key controls on seismicity are defined in terms of fault and fracture strength, second-order frictional response and stability, and competing fluid-driven mechanisms for arrest. We desire to constrain maximum event magnitudes in triggered earthquakes by relating pre-existing critical stresses to fluid injection volume to explain why some recorded events are significantly larger than anticipated seismic moment thresholds. This formalism is consistent with several uncharacteristically large fluid injection-triggered earthquakes. Such methods of reactivating fractures and faults by hydraulic stimulation in shear or tensile fracturing are routinely used to create permeability in the subsurface. Microearthquakes (MEQs) generated by such stimulations can be used to diagnose permeability evolution. Although high-fidelity data sets are scarce, the EGS-Collab and Utah FORGE hydraulic stimulation field demonstration projects provide high-fidelity data sets that concurrently track permeability evolution and triggered seismicity. Machine learning deciphers the principal features of MEQs and the resulting permeability evolution that best track permeability changes – with transfer learning methods allowing robust predictions across multiple eological settings. Changes in permeability at reactivated fractures in both shear and extensional modes suggest that permeability change (Δk) scales with the seismic moment (M) of individual MEQs as Δk∝M. This scaling relation is exact at early times but degrades with successive MEQs, but provides a method for characterizing crustal permeability evolution using MEQs, alone. Importantly, we quantify for the first time the role of prestress in defining the elevated magnitude and seismic moment of fluid injection-triggered events, and demonstrate that such MEQs can also be used as diagnostic in quantifying permeability evolution in the crust.展开更多
Mining-related seismicity poses significant challenges in underground coal mining due to its complex rupture mechanisms and associated hazards.To bridge gaps in understanding these intricate processes,this study emplo...Mining-related seismicity poses significant challenges in underground coal mining due to its complex rupture mechanisms and associated hazards.To bridge gaps in understanding these intricate processes,this study employed a multi-local seismic monitoring network,integrating both in-mine and local instruments at overlapping length scales.We specifically focused on a damaging local magnitude(ML)2.6 event and its aftershocks that occurred on 10 September 2022 in the vicinity of the 3308 working face of the Yangcheng coal mine in Shandong Province,China.Moment tensor(MT)inversion revealed a complex cascading rupture mechanism:an initial moment magnitude(M_(w))2.2 normal fault slip along the DF60 fault in an ESEeWNW direction,transitioning to a M_(w)3.0 event as the FD24 and DF60 faults unclamped.The scale-independent self-similarity and stress heterogeneity of mining-related seismicity were investigated through source parameter calculations,providing valuable insights into the driving mechanism of these seismic sequences.The in-mine network,constrained by its low dynamic changes,captured only the nucleation phase of the DF60 fault.Furthermore,standard decomposition of the MT solution from the seismic network proved inadequate for accurately identifying the complex nature of the rupture.To enhance safety and risk management in mining environments,we examined the implications of source reactivation within the cluster area post-stress-adjustment.This comprehensive multiscale analysis offers crucial insights into the complex rupture mechanisms and hazards associated with mining-related seismicity.The results underscore the importance of continuous multi-local network monitoring and advanced analytical techniques for improved disaster assessment and risk mitigation in mining operations.展开更多
The widespread variation of focal depths and fault plane solutions observed in the Hindukush region depicts continuous deformation along the Indian-Eurasian collision zone.For period of twelve years i.e.from 2010 to 2...The widespread variation of focal depths and fault plane solutions observed in the Hindukush region depicts continuous deformation along the Indian-Eurasian collision zone.For period of twelve years i.e.from 2010 to 2022,a total of 89 intermediate-depth earthquakes of magnitude(Mw)≥5.5 of the Hindukush Region were considered,relocated using both regional and tele seismic data with 90 per cent confidence limits of less than 20 km.Two distinct seismic activity clusters:First one at a deeper depth and second at a shallower depth having different P-axes were observed that verifies the internal structure and geometry of Hindukush zone as suggested in previous studies.Beneath the Hindukush collision zone,there exists a complex pattern of deformation,arising from a combination of compression,tension,shearing and necking states due to an unusual and a rare case of subduction that is not from oceanic plate.The Hindukush seismic zone extends from 70 to 300 km depth and mostly strikes east-west and then turns northeast.The relocated seismicity by merging data of seismic network close to Hindukush along with international data shows that the Hindukush zone may be divided vertically into upper and lower slabs separated by a gap at about 150 km depth at which strike and dip directions change sharply with significant structural changes.Seismicity rate is higher in the lower part of Hindukush,having large magnitude events in a small volume below 180 km forming complex pattern of source mechanisms.Contrary in upper part seismicity rate is lower and scattered.The Global CMT(Global Centroid-Moment-Tensor Project)source mechanisms of intermediate depth earthquakes have a systematic pattern of reverse faulting with the vertical T-axes,while shallow events do not have such pattern.The vertical T-axes of the intermediate-depth events may be attributed to negative buoyancy caused by subduction of the cold and denser slab.展开更多
Earthquakes are predominantly associated with tectonically active regions,yet the rising frequency of seismic events globally has raised concerns about the role of industrial activities,such as fluid injection,convent...Earthquakes are predominantly associated with tectonically active regions,yet the rising frequency of seismic events globally has raised concerns about the role of industrial activities,such as fluid injection,conventional oil-gas,mining,and reservoir impoundment,in triggering significant earthquakes.While natural processes like tectonic stress changes,fluid migration,and surface loading are critical in earthquake nucleation,human-induced seismicity is becoming increasingly recognized.The Atatürk Dam,Türkiye's largest clay-core rockfill dam,situated near the East Anatolian Fault System,Adyaman Fault Zone,and Bozova Fault,offers a compelling case to explore the interplay between tectonic and anthropogenic seismicity.This study presents the first trenching studies along the Bozova Fault,revealing evidence of surface ruptures and localized seismicity linked to reservoir impoundment and conventional oil and gas.Temporal and spatial analyses suggest that reservoir-induced mechanisms,including pore pressure diffusion and stress redistribution,significantly influence seismicity,recurrence interval,alongside dominant tectonic forces.By integrating trenching investigations,seismic analyses,and stress inversion techniques,this research highlights the critical role of anthropogenic factors in modulating seismic hazards.The findings emphasize the importance of paleoseismological and geophysical studies for distinguishing induced seismicity from natural tectonic activity,thereby contributing to improved seismic hazard assessment and mitigation strategies in tectonically active,reservoir-influenced regions.展开更多
The Main Himalayan Thrust(MHT),where the 2015 MW7.8 Gorkha earthquake occurred,features the most seismicity of any structure in Nepal.The structural complexity of the MHT makes it difficult to obtain a definitive inte...The Main Himalayan Thrust(MHT),where the 2015 MW7.8 Gorkha earthquake occurred,features the most seismicity of any structure in Nepal.The structural complexity of the MHT makes it difficult to obtain a definitive interpretation of deep seismogenic structures.The application of new methods and data in this region is necessary to enhance local seismic hazard analyses.In this study,we used a well-designed machine learning-based earthquake location workflow(LOC-FLOW),which incorporates machine learning phase picking,phase association,absolute location,and double-difference relative location,to process seismic data collected by the Hi-CLIMB and NAMASTE seismic networks.We built a high-precision earthquake catalog of both the quiet-period and aftershock seismicity in this region.The seismicity distribution suggests that the quietperiod seismicity(388 events)was controlled by a mid-crustal ramp and the aftershock seismicity(12,669 events)was controlled by several geological structures of the MHT.The higher-level detail of the catalogs derived from this machine learning method reveal clearer structural characteristics,showing how the flat-ramp geometry and a possible duplex structure affect the depth distribution of the seismic events,and how a tear fault changes this distribution along strike.展开更多
Given the complexity of earthquake forecast and the current limitations in the application of artificial intelligence(AI),we propose a conceptual framework for a novel AI system,HuiShangGPT,intended to act as an exper...Given the complexity of earthquake forecast and the current limitations in the application of artificial intelligence(AI),we propose a conceptual framework for a novel AI system,HuiShangGPT,intended to act as an expert in discussion on the trend of seismicity.This system,still in the conceptual stage,aims to integrate AI into the empirical approaches traditionally used in earthquake forecasting.The proposed HuiShangGPT system would not only assist in the comprehensive analysis of seismic data but also contribute to the expert panel discussions,enhancing the decision-making process.We outline the envisioned functionalities and potential benefits of such a system,while acknowledging the technical and practical challenges that need to be addressed for its future implementation.展开更多
Two long-term slow slip events(SSEs) in Lower Cook Inlet, Alaska, were identified by Li SS et al.(2016). The earlier SSE lasted at least 9 years with M_(w) ~7.8 and had an average slip rate of ~82 mm/year. The latter ...Two long-term slow slip events(SSEs) in Lower Cook Inlet, Alaska, were identified by Li SS et al.(2016). The earlier SSE lasted at least 9 years with M_(w) ~7.8 and had an average slip rate of ~82 mm/year. The latter SSE, occurring in a similar area, lasted approximately 2 years with M_(w) ~7.2 and an average slip rate of ~91 mm/year. To test whether these SSEs triggered earthquakes near the slow slip area, we calculated the Coulomb stressing rate changes on receiver faults by using two fault geometry definitions: nodal planes of focal mechanism solutions of past earthquakes, and optimally oriented fault planes. Regions in the shallow slab(30–60 km) that experienced a significant increase in the Coulomb stressing rate due to slip by the SSEs showed an increase in seismicity rates during SSE periods. No correlation was found in the volumes that underwent a significant increase in the Coulomb stressing rate during the SSE within the crust and the intermediate slab. We modeled variations in seismicity rates by using a combination of the Coulomb stress transfer model and the framework of rate-and-state friction. Our model indicated that the SSEs increased the Coulomb stress changes on adjacent faults,thereby increasing the seismicity rates even though the ratio of the SSE stressing rate to the background stressing rate was small. Each long-term SSE in Alaska brought the megathrust updip of the SSE areas closer to failure by up to 0.1–0.15 MPa. The volumes of significant Coulomb stress changes caused by the Upper and Lower Cook Inlet SSEs did not overlap.展开更多
Using the data of regional seismic network, this paper analyzes the current faulting behaviors of different segments of the Anninghe-Zemuhe fault zone, western Sichuan, and identifies the likely risky segments for pot...Using the data of regional seismic network, this paper analyzes the current faulting behaviors of different segments of the Anninghe-Zemuhe fault zone, western Sichuan, and identifies the likely risky segments for potential large earthquakes. The authors map the probable asperities from the abnormally low b-value distribution, develop and employ a method for identifying current faulting behaviors of individual fault segment from the combinations of multiple seismicity parameter values, and make an effort to estimate the average recurrence intervals of character-istic earthquakes by using the parameters of magnitude-frequency relationship of the asperity segment. The result suggests that the studied fault zone contains 5 segments of different current faulting behaviors. Among them, the Mianning-Xichang segment of the Anninghe fault has been locked under high stress, its central part is probably an asperity with a relatively large scale. The Xichang-Puge segment of the Zemuhe fault displays very low seismicity under low stress. Both the locked segment and the low-seismicity segment can be outlined on the across-profile of relocated hypocenter depths. The Mianning-Xichang segment is identified to be the one with potential large earth-quake risk, for which the average recurrence interval between the latest M = 6.7 earthquake in 1952 and the next characteristic event is estimated to be 55 to 67 years, and the magnitude of the potential earthquake between 7.0 and 7.5. Also, it has been preliminarily suggested that for a certain fault segment, its faulting behaviors may change and evolve with time gradually.展开更多
Using the data of regional seismic network, this paper analyzes the current faulting behaviors of different segments of the Anninghe-Zemuhe fault zone, western Sichuan, and identifies the likely risky segments for pot...Using the data of regional seismic network, this paper analyzes the current faulting behaviors of different segments of the Anninghe-Zemuhe fault zone, western Sichuan, and identifies the likely risky segments for potential large earthquakes. The authors map the probable asperities from the abnormally low b-value distribution, develop and employ a method for identifying current faulting behaviors of individual fault segment from the combinations of multiple seismicity parameter values, and make an effort to estimate the average recurrence intervals of character-istic earthquakes by using the parameters of magnitude-frequency relationship of the asperity segment. The result suggests that the studied fault zone contains 5 segments of different current faulting behaviors. Among them, the Mianning-Xichang segment of the Anninghe fault has been locked under high stress, its central part is probably an asperity with a relatively large scale. The Xichang-Puge segment of the Zemuhe fault displays very low seismicity under low stress. Both the locked segment and the low-seismicity segment can be outlined on the across-profile of relocated hypocenter depths. The Mianning-Xichang segment is identified to be the one with potential large earth-quake risk, for which the average recurrence interval between the latest M = 6.7 earthquake in 1952 and the next characteristic event is estimated to be 55 to 67 years, and the magnitude of the potential earthquake between 7.0 and 7.5. Also, it has been preliminarily suggested that for a certain fault segment, its faulting behaviors may change and evolve with time gradually.展开更多
In the light of current concerns related to induced seismicity associated with geological carbon sequestration(GCS),this paper summarizes lessons learned from recent modeling studies on fault activation,induced seismi...In the light of current concerns related to induced seismicity associated with geological carbon sequestration(GCS),this paper summarizes lessons learned from recent modeling studies on fault activation,induced seismicity,and potential for leakage associated with deep underground carbon dioxide(CO2) injection.Model simulations demonstrate that seismic events large enough to be felt by humans require brittle fault properties and continuous fault permeability allowing pressure to be distributed over a large fault patch to be ruptured at once.Heterogeneous fault properties,which are commonly encountered in faults intersecting multilayered shale/sandstone sequences,effectively reduce the likelihood of inducing felt seismicity and also effectively impede upward CO2leakage.A number of simulations show that even a sizable seismic event that could be felt may not be capable of opening a new flow path across the entire thickness of an overlying caprock and it is very unlikely to cross a system of multiple overlying caprock units.Site-specific model simulations of the In Salah CO2storage demonstration site showed that deep fractured zone responses and associated microseismicity occurred in the brittle fractured sandstone reservoir,but at a very substantial reservoir overpressure close to the magnitude of the least principal stress.We conclude by emphasizing the importance of site investigation to characterize rock properties and if at all possible to avoid brittle rock such as proximity of crystalline basement or sites in hard and brittle sedimentary sequences that are more prone to injection-induced seismicity and permanent damage.展开更多
The study in this paper analyzes and compares the distribution on the global engine active seismic zone and cooling seismic belt basing on the ANSS earthquake catalog from Northern California Earthquake Data Center. A...The study in this paper analyzes and compares the distribution on the global engine active seismic zone and cooling seismic belt basing on the ANSS earthquake catalog from Northern California Earthquake Data Center. An idea of the seismogenesis and earthquake prediction research is achieved by showing the stratigraphic structure in the hot engine belt. The results show that the main engine and its seismic cones are the global seismic activity area, as well as the subject of global geological disaster. Based on the conjecture of other stratum structure, the energy of crustal strong earthquake and volcano activities probably originates from the deep upper mantle. It is suggested that the research on earthquake and volcano prediction should focus on the monitor and analysis on the sub-crustal earthquake activities.展开更多
In order to adopt the best safety procedures, man-made earthquakes should be differentiated as a function of their origin. At least four different types of settings can be recognized in which anthropogenic activities ...In order to adopt the best safety procedures, man-made earthquakes should be differentiated as a function of their origin. At least four different types of settings can be recognized in which anthropogenic activities may generate seismicity:(I) fluid removal from a stratigraphic reservoir in the underground can trigger the compaction of the voids and the collapse of the overlying volume, i.e., graviquakes; the deeper the reservoir, the bigger the volume and the earthquake magnitude;(II) wastewater or gas reinjection provides the reduction of friction in volumes and along fault planes, allowing creep or sudden activation of tectonic discontinuities, i.e., reinjection quakes;(III) fluid injection at supra-lithostatic pressure generates hydrofracturing and micro-seismicity, i.e., hydrofracturing quakes;(IV) fluid extraction or fluid injection,filling or unfilling of artificial lakes modifies the lithostatic load, which is the maximum principal stress in extensional tectonic settings, the minimum principal stress in contractional tectonic settings, and the intermediate principal stress in strike-slip settings, i.e., load quakes; over given pressure values, the increase of the lithostatic load may favour the activation of normal faults, whereas its decrease may favour thrust faults. For example, the filling of an artificial lake may generate normal fault-related seismicity.Therefore, each setting has its peculiarities and the knowledge of the different mechanisms may contribute to the adoption of the appropriate precautions in the various industrial activities.展开更多
The sub-regions are divided for the seismicity of the Chinese mainland based on the hypothesis of the active crustal blocks and the division of the active boundaries. On this result, the seismicity of each active crus...The sub-regions are divided for the seismicity of the Chinese mainland based on the hypothesis of the active crustal blocks and the division of the active boundaries. On this result, the seismicity of each active crustal blocks are studied by calculating the accumulated and released strain of the earthquakes based on strain accumulating and releasing model, and the different seismicity stages of the sub-regions are discussed basically. Finally we have discussed the premise of the model application and the potential problems of the model results.展开更多
This paper explores possible synergies between techniques used to minimise seismicity in deep South African gold mines and their applicability to control coal bumps. The paper gives a summary of the techniques used in...This paper explores possible synergies between techniques used to minimise seismicity in deep South African gold mines and their applicability to control coal bumps. The paper gives a summary of the techniques used in the deep gold mines and a critical appraisal if these are useful in coal mines. The techniques typically include control of mining rate, preconditioning, optimisation of extraction sequences and centralised blasting. Of particular interest to the coal bump problem is an experimental limit equilibrium fracture zone model implemented in a displacement discontinuity code. This was recently developed for the gold mines to enable the interactive analysis of complex tabular mine layout extraction sequences. The model specifically accommodates energy dissipation computations in the developing fracture zone near the edges of these excavations. This allows the released energy to be used as a surrogate measure of ongoing seismic activity and addresses a number of the weaknesses in the traditional usage of this quantity as a criterion for the design of seismically active layouts. This paper investigates the application of the model to a hypothetical coal longwall layout and the specific problem of coal bumps.展开更多
The "Arctic" region,where the North Pole occupies the center of the Arctic Ocean,has been affecting the environmental variation of the Earth from geological time to the present.However,the seismic activities...The "Arctic" region,where the North Pole occupies the center of the Arctic Ocean,has been affecting the environmental variation of the Earth from geological time to the present.However,the seismic activities in the area are not adequately monitored.Therefore,by conducting long term monitoring of seismic phenomenon as sustainable parameters,our understanding of both the tectonic evolution of the Earth and the dynamic interaction between the cryosphere and geosphere in surface layers of the Earth will increase.In this paper,the association of the seismicity and structure of the Arctic region,particularly focused on Eurasian continent and surrounding oceans,and its relationship with regional evolution during the Earth’s history is studied.The target areas cover representative tectonic provinces in the Eurasian Arctic,such as the wide area of Siberia,Baikal Rift Zone.Far East Russia,Arctic Ocean together with Greenland and Northern Canada.Based on discussion including characteristics of seismicity,heterogeneous structure of the crust and upper mantle,tectonic history and recent dynamic features of the Earth’s surface in the Arctic are summarized.展开更多
We studied the seismicity before and after the M_s=7.8 Tangshan event on July 28, 1976 (39°28'N, 1 18° 11'E) and the results show that in 3 regions outside of the source zone, seismicity rate increas...We studied the seismicity before and after the M_s=7.8 Tangshan event on July 28, 1976 (39°28'N, 1 18° 11'E) and the results show that in 3 regions outside of the source zone, seismicity rate increasing were observed, which was significant in 0.99 significance level using Z-statistic test and was proposed to be triggered by the M_s=7.8 Tangshan earthquake. The magnitude of the greatest triggered event was 5.5. The epicenter distances of these earthquakes were several ten kilometers to 300 km. The static stress change △CFS of Coulomb failure was calculated using an elastic dislocation model in half space and the △CFS on the major rupture directions in these three regions were positive.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.U20A20266 and 12302503)Scientific and technological research projects in Sichuan province(Grant No.2024NSFSC0973).
文摘Source properties and stress fields are critical to understand fundamental mechanisms for fluid-induced earthquakes.In this study,we identify the focal mechanism solutions(FMSs)of 360 earthquakes with local magnitude M_(L)≥1.5 in the Changning shale gas field from January 2016 to May 2017 by fitting three-component waveforms.We then constrain the directions of the maximum horizontal stress(σ_(H_(max)))for four dense earthquake clusters using the stress tensor inversion method.The stress drops of 121 earthquakes with M_(L)≥1.5 are calculated using the spectral ratio method.We examine the spatiotemporal heterogeneity of stress field,and discuss the cause of non-double-couple(non-DC)components in seismicity clusters.Following the Mohr-Coulomb criterion,we estimate the fluid overpressure thresholds from FMS for different seismic clusters,providing insights into potential physical mechanisms for induced seismicity.The FMS results indicate that shallow reverse earthquakes,with steep dip angles,characterize most events.The source mechanisms of earthquakes with M_(L)≥1.5 are dominated by DC components(>70%),but several earthquakes with M_(L)>3.0 and the microseismic events nearby during injection period display significant non-DC components(>30%).Stress inversion results reveal that the σ_(H_(max)) direction ranges from 120°to 128°.Stress drops of earthquakes range between 0.10 and 64.49 MPa,with high values occurring on reverse faults situated at a greater distance from the shale layer,accompanied by a moderate rotation(≤25°)in the trend of σ_(H_(max)).The seismic clusters close to the shale layer exhibit low fluid overpressure thresholds,prone to being triggered by high pore-pressure fluid.The integrated results suggest that the diffusion of high pore pressures is likely to be the primary factor for observed earthquakes.The present results are expected to offer valuable insights into the origin of anomalous seismicity near the shale gas sites.
基金Australian Research Council Linkage Program(LP200301404)for sponsoring this researchthe financial support provided by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Chengdu University of Technology,SKLGP2021K002)National Natural Science Foundation of China(52374101,32111530138).
文摘Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hydraulic fracturing process in lab-scale coal samples with DFNs and the induced seismic activities by the discrete element method(DEM).The effects of DFNs on hydraulic fracturing,induced seismicity and elastic property changes have been concluded.Denser DFNs can comprehensively decrease the peak injection pressure and injection duration.The proportion of strong seismic events increases first and then decreases with increasing DFN density.In addition,the relative modulus of the rock mass is derived innovatively from breakdown pressure,breakdown fracture length and the related initiation time.Increasing DFN densities among large(35–60 degrees)and small(0–30 degrees)fracture dip angles show opposite evolution trends in relative modulus.The transitional point(dip angle)for the opposite trends is also proportionally affected by the friction angle of the rock mass.The modelling results have much practical meaning to infer the density and geometry of pre-existing fractures and the elastic property of rock mass in the field,simply based on the hydraulic fracturing and induced seismicity monitoring data.
基金supported by National Natural Science Foundation of China(No.41861134009)the PIA ANID(AFB180004)the ANID(PCI PII-180003).
文摘The Chilean subduction zone is one of the most seismically active regions globally,characterized by extensive intermediatedepth seismicity in the slab.In this study,we construct a new earthquake catalog for northern Chile using seismic waveforms assembled for the period of 2014-2019,from which 320,070 P-wave and 232,907 S-wave first arrivals are obtained for 25,763 earthquakes.Grid search location method NonLinLoc is applied to determine initial earthquake locations and double-difference location method is used to improve relative event locations.The distribution of earthquakes exhibits distinct patterns to the north and south of 21°S.There are many more earthquakes deeper than~150 km to the south of 21°S,while relatively fewer to the north.The intraslab earthquakes shallower than~80 km generally reveal a distinct double seismic zone,and the gap between the two seismic planes disappears at a depth of approximately~80 km,followed by a concentration of seismicity in the depth range of~80-150 km.In the deeper slab,there exist several seismicity clusters with distinct earthquake activities down to~300 km.These characteristics shown in slab seismicity are likely caused by different mechanisms and can be helpful for understanding the subduction process.
基金funded by the Joint Funds of the National Natural Science Foundation of China(U23A20671)the Major Project of Inner Mongolia Science and Technology(2021ZD0034)the Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering(No.Z021003)。
文摘The occurrence time and magnitude of injection-induced seismicity are influenced by engineering factors,such as wellhead pressure,injection location,injection volume,and injection rate.Understanding the relationship between injection operations and seismic magnitude is of great significance for optimizing industrial production and reducing earthquake disasters.Numerical simulation of hydromechanical coupling is a crucial method for studying injection-induced seismicity.However,few studies have explored the risk management measures for injection-induced seismicity from the perspective of engineering.How seismic magnitudes can be reduced through reasonable adjustments to injection operations in engineering remains unclear.Therefore,in this study,a 3D hydro-mechanical coupling model involving multiple faults and injection wells was established based on the geological background and well location of Fox Creek,Canada.Different injection schemes under multi-well and multi-fault conditions were studied,and a traffic light system was used to simulate and control the magnitudes under a multi-well injection scheme.Specifically,we simulated injection scenarios involving up to three wells and analyzed the response of five faults.We compared the maximum moment magnitude of different scenarios by controlling the same injection volume.The results revealed the effect and advantage of the multi-well scheme in reducing seismic magnitude.To reduce the risk of induced seismicity,utilizing far-fault operational wells to compensate for the effects of near-fault operational wells proves to be an efficient and cost-effective method,with potential for wide practical applications.
基金Derek Elsworth acknowledges the support from a Gledden Visiting Fellowship from the Institute of Advanced Studies at the University of Western Australia,Australia,and the G.Albert Shoemaker Endowment at Pennsylvania State University,USA.
文摘Triggered seismicity is a key hazard where fluids are injected or withdrawn from the subsurface and may impact permeability. Understanding the mechanisms that control fluid injection-triggered seismicity allows its mitigation. Key controls on seismicity are defined in terms of fault and fracture strength, second-order frictional response and stability, and competing fluid-driven mechanisms for arrest. We desire to constrain maximum event magnitudes in triggered earthquakes by relating pre-existing critical stresses to fluid injection volume to explain why some recorded events are significantly larger than anticipated seismic moment thresholds. This formalism is consistent with several uncharacteristically large fluid injection-triggered earthquakes. Such methods of reactivating fractures and faults by hydraulic stimulation in shear or tensile fracturing are routinely used to create permeability in the subsurface. Microearthquakes (MEQs) generated by such stimulations can be used to diagnose permeability evolution. Although high-fidelity data sets are scarce, the EGS-Collab and Utah FORGE hydraulic stimulation field demonstration projects provide high-fidelity data sets that concurrently track permeability evolution and triggered seismicity. Machine learning deciphers the principal features of MEQs and the resulting permeability evolution that best track permeability changes – with transfer learning methods allowing robust predictions across multiple eological settings. Changes in permeability at reactivated fractures in both shear and extensional modes suggest that permeability change (Δk) scales with the seismic moment (M) of individual MEQs as Δk∝M. This scaling relation is exact at early times but degrades with successive MEQs, but provides a method for characterizing crustal permeability evolution using MEQs, alone. Importantly, we quantify for the first time the role of prestress in defining the elevated magnitude and seismic moment of fluid injection-triggered events, and demonstrate that such MEQs can also be used as diagnostic in quantifying permeability evolution in the crust.
基金funded by the National Natural Science Foundation of China(Grant No.51574225)Shandong Energy Group(Grant No.SNKJ2022BJ03-R28)for Caiping Lu+1 种基金the Research Team on MonitoringActivity Mechanisms of Unnatural Earthquakes of Shandong Earthquake Agency(Grant No.TD202301)for Chengyu Liu.
文摘Mining-related seismicity poses significant challenges in underground coal mining due to its complex rupture mechanisms and associated hazards.To bridge gaps in understanding these intricate processes,this study employed a multi-local seismic monitoring network,integrating both in-mine and local instruments at overlapping length scales.We specifically focused on a damaging local magnitude(ML)2.6 event and its aftershocks that occurred on 10 September 2022 in the vicinity of the 3308 working face of the Yangcheng coal mine in Shandong Province,China.Moment tensor(MT)inversion revealed a complex cascading rupture mechanism:an initial moment magnitude(M_(w))2.2 normal fault slip along the DF60 fault in an ESEeWNW direction,transitioning to a M_(w)3.0 event as the FD24 and DF60 faults unclamped.The scale-independent self-similarity and stress heterogeneity of mining-related seismicity were investigated through source parameter calculations,providing valuable insights into the driving mechanism of these seismic sequences.The in-mine network,constrained by its low dynamic changes,captured only the nucleation phase of the DF60 fault.Furthermore,standard decomposition of the MT solution from the seismic network proved inadequate for accurately identifying the complex nature of the rupture.To enhance safety and risk management in mining environments,we examined the implications of source reactivation within the cluster area post-stress-adjustment.This comprehensive multiscale analysis offers crucial insights into the complex rupture mechanisms and hazards associated with mining-related seismicity.The results underscore the importance of continuous multi-local network monitoring and advanced analytical techniques for improved disaster assessment and risk mitigation in mining operations.
文摘The widespread variation of focal depths and fault plane solutions observed in the Hindukush region depicts continuous deformation along the Indian-Eurasian collision zone.For period of twelve years i.e.from 2010 to 2022,a total of 89 intermediate-depth earthquakes of magnitude(Mw)≥5.5 of the Hindukush Region were considered,relocated using both regional and tele seismic data with 90 per cent confidence limits of less than 20 km.Two distinct seismic activity clusters:First one at a deeper depth and second at a shallower depth having different P-axes were observed that verifies the internal structure and geometry of Hindukush zone as suggested in previous studies.Beneath the Hindukush collision zone,there exists a complex pattern of deformation,arising from a combination of compression,tension,shearing and necking states due to an unusual and a rare case of subduction that is not from oceanic plate.The Hindukush seismic zone extends from 70 to 300 km depth and mostly strikes east-west and then turns northeast.The relocated seismicity by merging data of seismic network close to Hindukush along with international data shows that the Hindukush zone may be divided vertically into upper and lower slabs separated by a gap at about 150 km depth at which strike and dip directions change sharply with significant structural changes.Seismicity rate is higher in the lower part of Hindukush,having large magnitude events in a small volume below 180 km forming complex pattern of source mechanisms.Contrary in upper part seismicity rate is lower and scattered.The Global CMT(Global Centroid-Moment-Tensor Project)source mechanisms of intermediate depth earthquakes have a systematic pattern of reverse faulting with the vertical T-axes,while shallow events do not have such pattern.The vertical T-axes of the intermediate-depth events may be attributed to negative buoyancy caused by subduction of the cold and denser slab.
文摘Earthquakes are predominantly associated with tectonically active regions,yet the rising frequency of seismic events globally has raised concerns about the role of industrial activities,such as fluid injection,conventional oil-gas,mining,and reservoir impoundment,in triggering significant earthquakes.While natural processes like tectonic stress changes,fluid migration,and surface loading are critical in earthquake nucleation,human-induced seismicity is becoming increasingly recognized.The Atatürk Dam,Türkiye's largest clay-core rockfill dam,situated near the East Anatolian Fault System,Adyaman Fault Zone,and Bozova Fault,offers a compelling case to explore the interplay between tectonic and anthropogenic seismicity.This study presents the first trenching studies along the Bozova Fault,revealing evidence of surface ruptures and localized seismicity linked to reservoir impoundment and conventional oil and gas.Temporal and spatial analyses suggest that reservoir-induced mechanisms,including pore pressure diffusion and stress redistribution,significantly influence seismicity,recurrence interval,alongside dominant tectonic forces.By integrating trenching investigations,seismic analyses,and stress inversion techniques,this research highlights the critical role of anthropogenic factors in modulating seismic hazards.The findings emphasize the importance of paleoseismological and geophysical studies for distinguishing induced seismicity from natural tectonic activity,thereby contributing to improved seismic hazard assessment and mitigation strategies in tectonically active,reservoir-influenced regions.
基金funded by the National Key R&D Program of China(2022YFF0800601)National Natural Science Foundation of China(42174069,U1939204).
文摘The Main Himalayan Thrust(MHT),where the 2015 MW7.8 Gorkha earthquake occurred,features the most seismicity of any structure in Nepal.The structural complexity of the MHT makes it difficult to obtain a definitive interpretation of deep seismogenic structures.The application of new methods and data in this region is necessary to enhance local seismic hazard analyses.In this study,we used a well-designed machine learning-based earthquake location workflow(LOC-FLOW),which incorporates machine learning phase picking,phase association,absolute location,and double-difference relative location,to process seismic data collected by the Hi-CLIMB and NAMASTE seismic networks.We built a high-precision earthquake catalog of both the quiet-period and aftershock seismicity in this region.The seismicity distribution suggests that the quietperiod seismicity(388 events)was controlled by a mid-crustal ramp and the aftershock seismicity(12,669 events)was controlled by several geological structures of the MHT.The higher-level detail of the catalogs derived from this machine learning method reveal clearer structural characteristics,showing how the flat-ramp geometry and a possible duplex structure affect the depth distribution of the seismic events,and how a tear fault changes this distribution along strike.
基金supported by the National Natural Science Foundation of China(No.U2039207).
文摘Given the complexity of earthquake forecast and the current limitations in the application of artificial intelligence(AI),we propose a conceptual framework for a novel AI system,HuiShangGPT,intended to act as an expert in discussion on the trend of seismicity.This system,still in the conceptual stage,aims to integrate AI into the empirical approaches traditionally used in earthquake forecasting.The proposed HuiShangGPT system would not only assist in the comprehensive analysis of seismic data but also contribute to the expert panel discussions,enhancing the decision-making process.We outline the envisioned functionalities and potential benefits of such a system,while acknowledging the technical and practical challenges that need to be addressed for its future implementation.
基金supported by the National Natural Science Foundation of China (Grant No. 42104001)。
文摘Two long-term slow slip events(SSEs) in Lower Cook Inlet, Alaska, were identified by Li SS et al.(2016). The earlier SSE lasted at least 9 years with M_(w) ~7.8 and had an average slip rate of ~82 mm/year. The latter SSE, occurring in a similar area, lasted approximately 2 years with M_(w) ~7.2 and an average slip rate of ~91 mm/year. To test whether these SSEs triggered earthquakes near the slow slip area, we calculated the Coulomb stressing rate changes on receiver faults by using two fault geometry definitions: nodal planes of focal mechanism solutions of past earthquakes, and optimally oriented fault planes. Regions in the shallow slab(30–60 km) that experienced a significant increase in the Coulomb stressing rate due to slip by the SSEs showed an increase in seismicity rates during SSE periods. No correlation was found in the volumes that underwent a significant increase in the Coulomb stressing rate during the SSE within the crust and the intermediate slab. We modeled variations in seismicity rates by using a combination of the Coulomb stress transfer model and the framework of rate-and-state friction. Our model indicated that the SSEs increased the Coulomb stress changes on adjacent faults,thereby increasing the seismicity rates even though the ratio of the SSE stressing rate to the background stressing rate was small. Each long-term SSE in Alaska brought the megathrust updip of the SSE areas closer to failure by up to 0.1–0.15 MPa. The volumes of significant Coulomb stress changes caused by the Upper and Lower Cook Inlet SSEs did not overlap.
基金Chinese Joint Seismological Science Foundation (102002).
文摘Using the data of regional seismic network, this paper analyzes the current faulting behaviors of different segments of the Anninghe-Zemuhe fault zone, western Sichuan, and identifies the likely risky segments for potential large earthquakes. The authors map the probable asperities from the abnormally low b-value distribution, develop and employ a method for identifying current faulting behaviors of individual fault segment from the combinations of multiple seismicity parameter values, and make an effort to estimate the average recurrence intervals of character-istic earthquakes by using the parameters of magnitude-frequency relationship of the asperity segment. The result suggests that the studied fault zone contains 5 segments of different current faulting behaviors. Among them, the Mianning-Xichang segment of the Anninghe fault has been locked under high stress, its central part is probably an asperity with a relatively large scale. The Xichang-Puge segment of the Zemuhe fault displays very low seismicity under low stress. Both the locked segment and the low-seismicity segment can be outlined on the across-profile of relocated hypocenter depths. The Mianning-Xichang segment is identified to be the one with potential large earth-quake risk, for which the average recurrence interval between the latest M = 6.7 earthquake in 1952 and the next characteristic event is estimated to be 55 to 67 years, and the magnitude of the potential earthquake between 7.0 and 7.5. Also, it has been preliminarily suggested that for a certain fault segment, its faulting behaviors may change and evolve with time gradually.
基金Chinese Joint Seismological Science Foundation (102002).
文摘Using the data of regional seismic network, this paper analyzes the current faulting behaviors of different segments of the Anninghe-Zemuhe fault zone, western Sichuan, and identifies the likely risky segments for potential large earthquakes. The authors map the probable asperities from the abnormally low b-value distribution, develop and employ a method for identifying current faulting behaviors of individual fault segment from the combinations of multiple seismicity parameter values, and make an effort to estimate the average recurrence intervals of character-istic earthquakes by using the parameters of magnitude-frequency relationship of the asperity segment. The result suggests that the studied fault zone contains 5 segments of different current faulting behaviors. Among them, the Mianning-Xichang segment of the Anninghe fault has been locked under high stress, its central part is probably an asperity with a relatively large scale. The Xichang-Puge segment of the Zemuhe fault displays very low seismicity under low stress. Both the locked segment and the low-seismicity segment can be outlined on the across-profile of relocated hypocenter depths. The Mianning-Xichang segment is identified to be the one with potential large earth-quake risk, for which the average recurrence interval between the latest M = 6.7 earthquake in 1952 and the next characteristic event is estimated to be 55 to 67 years, and the magnitude of the potential earthquake between 7.0 and 7.5. Also, it has been preliminarily suggested that for a certain fault segment, its faulting behaviors may change and evolve with time gradually.
基金funded by the Assistant Secretary for Fossil Energy,National Energy Technology Laboratory,National Risk Assessment Partnership of the U.S. Department of Energy under Contract No.DEAC02-05CH11231a Swiss National Science Foundation(SNSF) Ambizione Energy grant(PZENP2_160555)
文摘In the light of current concerns related to induced seismicity associated with geological carbon sequestration(GCS),this paper summarizes lessons learned from recent modeling studies on fault activation,induced seismicity,and potential for leakage associated with deep underground carbon dioxide(CO2) injection.Model simulations demonstrate that seismic events large enough to be felt by humans require brittle fault properties and continuous fault permeability allowing pressure to be distributed over a large fault patch to be ruptured at once.Heterogeneous fault properties,which are commonly encountered in faults intersecting multilayered shale/sandstone sequences,effectively reduce the likelihood of inducing felt seismicity and also effectively impede upward CO2leakage.A number of simulations show that even a sizable seismic event that could be felt may not be capable of opening a new flow path across the entire thickness of an overlying caprock and it is very unlikely to cross a system of multiple overlying caprock units.Site-specific model simulations of the In Salah CO2storage demonstration site showed that deep fractured zone responses and associated microseismicity occurred in the brittle fractured sandstone reservoir,but at a very substantial reservoir overpressure close to the magnitude of the least principal stress.We conclude by emphasizing the importance of site investigation to characterize rock properties and if at all possible to avoid brittle rock such as proximity of crystalline basement or sites in hard and brittle sedimentary sequences that are more prone to injection-induced seismicity and permanent damage.
文摘The study in this paper analyzes and compares the distribution on the global engine active seismic zone and cooling seismic belt basing on the ANSS earthquake catalog from Northern California Earthquake Data Center. An idea of the seismogenesis and earthquake prediction research is achieved by showing the stratigraphic structure in the hot engine belt. The results show that the main engine and its seismic cones are the global seismic activity area, as well as the subject of global geological disaster. Based on the conjecture of other stratum structure, the energy of crustal strong earthquake and volcano activities probably originates from the deep upper mantle. It is suggested that the research on earthquake and volcano prediction should focus on the monitor and analysis on the sub-crustal earthquake activities.
文摘In order to adopt the best safety procedures, man-made earthquakes should be differentiated as a function of their origin. At least four different types of settings can be recognized in which anthropogenic activities may generate seismicity:(I) fluid removal from a stratigraphic reservoir in the underground can trigger the compaction of the voids and the collapse of the overlying volume, i.e., graviquakes; the deeper the reservoir, the bigger the volume and the earthquake magnitude;(II) wastewater or gas reinjection provides the reduction of friction in volumes and along fault planes, allowing creep or sudden activation of tectonic discontinuities, i.e., reinjection quakes;(III) fluid injection at supra-lithostatic pressure generates hydrofracturing and micro-seismicity, i.e., hydrofracturing quakes;(IV) fluid extraction or fluid injection,filling or unfilling of artificial lakes modifies the lithostatic load, which is the maximum principal stress in extensional tectonic settings, the minimum principal stress in contractional tectonic settings, and the intermediate principal stress in strike-slip settings, i.e., load quakes; over given pressure values, the increase of the lithostatic load may favour the activation of normal faults, whereas its decrease may favour thrust faults. For example, the filling of an artificial lake may generate normal fault-related seismicity.Therefore, each setting has its peculiarities and the knowledge of the different mechanisms may contribute to the adoption of the appropriate precautions in the various industrial activities.
基金The Development and Planning Project of National Important Base Research on the Mechanism and Forecast for Continental Strong Earthquake (G19980407).
文摘The sub-regions are divided for the seismicity of the Chinese mainland based on the hypothesis of the active crustal blocks and the division of the active boundaries. On this result, the seismicity of each active crustal blocks are studied by calculating the accumulated and released strain of the earthquakes based on strain accumulating and releasing model, and the different seismicity stages of the sub-regions are discussed basically. Finally we have discussed the premise of the model application and the potential problems of the model results.
文摘This paper explores possible synergies between techniques used to minimise seismicity in deep South African gold mines and their applicability to control coal bumps. The paper gives a summary of the techniques used in the deep gold mines and a critical appraisal if these are useful in coal mines. The techniques typically include control of mining rate, preconditioning, optimisation of extraction sequences and centralised blasting. Of particular interest to the coal bump problem is an experimental limit equilibrium fracture zone model implemented in a displacement discontinuity code. This was recently developed for the gold mines to enable the interactive analysis of complex tabular mine layout extraction sequences. The model specifically accommodates energy dissipation computations in the developing fracture zone near the edges of these excavations. This allows the released energy to be used as a surrogate measure of ongoing seismic activity and addresses a number of the weaknesses in the traditional usage of this quantity as a criterion for the design of seismically active layouts. This paper investigates the application of the model to a hypothetical coal longwall layout and the specific problem of coal bumps.
基金supported by JSPS KAKENHI Grant Number 26241010(P.I.by Dr.Masaki Kanao)
文摘The "Arctic" region,where the North Pole occupies the center of the Arctic Ocean,has been affecting the environmental variation of the Earth from geological time to the present.However,the seismic activities in the area are not adequately monitored.Therefore,by conducting long term monitoring of seismic phenomenon as sustainable parameters,our understanding of both the tectonic evolution of the Earth and the dynamic interaction between the cryosphere and geosphere in surface layers of the Earth will increase.In this paper,the association of the seismicity and structure of the Arctic region,particularly focused on Eurasian continent and surrounding oceans,and its relationship with regional evolution during the Earth’s history is studied.The target areas cover representative tectonic provinces in the Eurasian Arctic,such as the wide area of Siberia,Baikal Rift Zone.Far East Russia,Arctic Ocean together with Greenland and Northern Canada.Based on discussion including characteristics of seismicity,heterogeneous structure of the crust and upper mantle,tectonic history and recent dynamic features of the Earth’s surface in the Arctic are summarized.
文摘We studied the seismicity before and after the M_s=7.8 Tangshan event on July 28, 1976 (39°28'N, 1 18° 11'E) and the results show that in 3 regions outside of the source zone, seismicity rate increasing were observed, which was significant in 0.99 significance level using Z-statistic test and was proposed to be triggered by the M_s=7.8 Tangshan earthquake. The magnitude of the greatest triggered event was 5.5. The epicenter distances of these earthquakes were several ten kilometers to 300 km. The static stress change △CFS of Coulomb failure was calculated using an elastic dislocation model in half space and the △CFS on the major rupture directions in these three regions were positive.
