Emulation platforms are critical for evaluation and verification in the research of networking technologies and protocols for space networks(SN).High fidelity emulating technologies have been extensively studied for S...Emulation platforms are critical for evaluation and verification in the research of networking technologies and protocols for space networks(SN).High fidelity emulating technologies have been extensively studied for SN in earlier work,while little emphasis has been placed on the performance evaluation part.In this paper,the design of a network performance analysis architecture is presented,with which high-speed network traffic can be captured and indexed,and the performance of the emulated SN can be well analyzed and evaluated.This architecture comprises three components,namely capture layer,storage layer and analysis layer.Analytic Hierarchy Process(AHP)and several analysis methods are adopted to evaluate the network performance comprehensively.In the implementation of the proposed architecture,configuration optimization and parallel processing are applied to handle large amount of high-speed network traffic.Finally,experiment results through the analysis system exhibits the effectiveness of the proposed architecture.展开更多
This paper studies the sensing base station(SBS)that has great potential to improve the safety of vehicles and pedestrians on roads.SBS can detect the targets on the road with communication signals using the integrate...This paper studies the sensing base station(SBS)that has great potential to improve the safety of vehicles and pedestrians on roads.SBS can detect the targets on the road with communication signals using the integrated sensing and communication(ISAC)technique.Compared with vehicle-mounted radar,SBS has a better sensing field due to its higher deployment position,which can help solve the problem of sensing blind areas.In this paper,key technologies of SBS are studied,including the beamforming algorithm,beam scanning scheme,and interference cancellation algorithm.To transmit and receive ISAC signals simultaneously,a double-coupling antenna array is applied.The free detection beam and directional communication beam are proposed for joint communication and sensing to meet the requirements of beamwidth and pointing directions.The joint timespace-frequency domain division multiple access algorithm is proposed to cancel the interference of SBS,including multiuser interference and duplex interference between sensing and communication.Finally,the sensing and communication performance of SBS under the industrial scientific medical power limitation is analyzed and simulated.Simulation results show that the communication rate of SBS can reach over 100 Mbps and the range of sensing and communication can reach about 500 m.展开更多
In wideband noncooperative interference cancellation,the reference signals obtained through auxiliary antennas are weighted to cancel with the interference signal.The correlation between the reference signal and the i...In wideband noncooperative interference cancellation,the reference signals obtained through auxiliary antennas are weighted to cancel with the interference signal.The correlation between the reference signal and the interference signal determines interference cancellation performance,while the auxiliary antenna array affects the correlation by influencing the amplitude and phase of the reference signals.This paper analyzes the effect of auxiliary antenna array on multiple performances of wideband noncooperative interference cancellation.Firstly,the array received signal model of wideband interference is established,and the weight vector coupled with the auxiliary antennas array manifold is solved by spectral analysis and eigen-subspace decomposition.Then,multiple performances which include cancellation resolution,grating null,wideband interference cancellation ratio(ICR),and convergence rate are quantitatively characterized with the auxiliary antenna array.It is obtained through analysis that the performances mutually restrict the auxiliary antenna array.Higher cancellation resolution requires larger array aperture,but when the number of auxiliary antennas is fixed,larger array aperture results in more grating nulls.When the auxiliary antennas are closer to the main antenna,the wideband ICR is improved,but the convergence rate is reduced.The conclusions are verified through simulation of one-dimensional uniform array and two-dimensional nonuniform array.The experiments of three arrays are compared,and the results conform well with simulation and support the theoretical analysis.展开更多
This paper presents a novel suspension support tailored for wind tunnel tests of spinning projectiles based on Wire-Driven Parallel Robot(WDPR),uniquely characterized by an SPM(Spinning Projectile Model)-centered mobi...This paper presents a novel suspension support tailored for wind tunnel tests of spinning projectiles based on Wire-Driven Parallel Robot(WDPR),uniquely characterized by an SPM(Spinning Projectile Model)-centered mobile platform.First,an SPM-centered mobile platform,featuring two redundant and another unconstrained Degree of Freedom(DOF),and its suspension support mechanism are designed together,collectively constructing a WDPR endowed with kinematic redundancy.Afterward,the kinematics of the mechanism,boundary equations for the redundant DOFs,and relevant kinematic performance indices are then proposed and formulated.The results from both prototype experiments and numerical assessments are presented.The capability of the support mechanism to replicate the complex coupled motions of the SPM is verified by the experimental results,while the proposed kinematics and boundary equations are also validated.Furthermore,it is revealed by numerical assessments that the redundant DOFs of the mobile platform exert a minimal impact on the kinematic performance of the suspension support.Finally,the optimal global attitude performance is obtained when these DOFs are set to zero if they are restricted to constants.However,local attitude performance can be further improved by the variable values.展开更多
Integrated data and energy transfer(IDET)enables the electromagnetic waves to transmit wireless energy at the same time of data delivery for lowpower devices.In this paper,an energy harvesting modulation(EHM)assisted ...Integrated data and energy transfer(IDET)enables the electromagnetic waves to transmit wireless energy at the same time of data delivery for lowpower devices.In this paper,an energy harvesting modulation(EHM)assisted multi-user IDET system is studied,where all the received signals at the users are exploited for energy harvesting without the degradation of wireless data transfer(WDT)performance.The joint IDET performance is then analysed theoretically by conceiving a practical time-dependent wireless channel.With the aid of the AO based algorithm,the average effective data rate among users are maximized by ensuring the BER and the wireless energy transfer(WET)performance.Simulation results validate and evaluate the IDET performance of the EHM assisted system,which also demonstrates that the optimal number of user clusters and IDET time slots should be allocated,in order to improve the WET and WDT performance.展开更多
Serving multiple cell-edge mobile terminals poses multifaceted challenges due to the increased transmission power and interferences, which could be overcome by relay communications. With the recent advancement of 5G t...Serving multiple cell-edge mobile terminals poses multifaceted challenges due to the increased transmission power and interferences, which could be overcome by relay communications. With the recent advancement of 5G technologies, non-orthogonal multiple access(NOMA) has been used at relay node to transmit multiple messages simultaneously to multiple cell-edge users. In this paper, a Collaborative NOMA Assisted Relaying(CNAR) system for 5G is proposed by enabling the collaboration of source-relay(S-R) and relay-destination(R-D) NOMA links. The relay node of the CNAR decodes the message for itself from S-R NOMA signal and transmits the remaining messages to the multiple cell-edge users in R-D link. A simplified-CNAR(S-CNAR) system is then developed to reduce the relay complexity. The outage probabilities for both systems are analyzed by considering outage behaviors in S-R and R-D links separately. To guarantee the data rate, the optimal power allocation among NOMA users is achieved by minimizing the outage probability. The ergodic sum capacity in high SNR regime is also approximated. Our mathematical analysis and simulation results show that CNAR system outperforms existing transmission strategies and S-CNAR reaches similar performance with much lower complexity.展开更多
With the increased accessibility of global trade information,transaction fraud has become a major worry in global banking and commerce security.The incidence and magnitude of transaction fraud are increasing daily,res...With the increased accessibility of global trade information,transaction fraud has become a major worry in global banking and commerce security.The incidence and magnitude of transaction fraud are increasing daily,resulting in significant financial losses for both customers and financial professionals.With improvements in data mining and machine learning in computer science,the capacity to detect transaction fraud is becoming increasingly attainable.The primary goal of this research is to undertake a comparative examination of cutting-edge machine-learning algorithms developed to detect credit card fraud.The research looks at the efficacy of these machine learning algorithms using a publicly available dataset of credit card transactions performed by European cardholders in 2023,comprising around 550,000 records.The study uses this dataset to assess the performance of well-established machine learning models,measuring their accuracy,recall,and F1 score.In addition,the study includes a confusion matrix for all models to aid in evaluation and training time duration.Machin learning models,including Logistic regression,random forest,extra trees,and LGBM,achieve high accuracy and precision in the credit card fraud detection dataset,with a reported accuracy,recall,and F1 score of 1.00 for both classes.展开更多
The importance of cybersecurity in contemporary society cannot be inflated,given the substantial impact of networks on various aspects of daily life.Traditional cybersecurity measures,such as anti-virus software and f...The importance of cybersecurity in contemporary society cannot be inflated,given the substantial impact of networks on various aspects of daily life.Traditional cybersecurity measures,such as anti-virus software and firewalls,safeguard networks against potential threats.In network security,using Intrusion Detection Systems(IDSs)is vital for effectively monitoring the various software and hardware components inside a given network.However,they may encounter difficulties when it comes to detecting solitary attacks.Machine Learning(ML)models are implemented in intrusion detection widely because of the high accuracy.The present work aims to assess the performance of machine learning algorithms in the context of intrusion detection,providing valuable insights into their efficacy and potential for enhancing cybersecurity measures.The main objective is to compare the performance of the well-knownML models using the UNSW-NB15 dataset.The performance of the models is discussed in detail with a comparison using evaluation metrics and computational performance.展开更多
Research of capture mechanisms with strong capture adaptability and stable grasp is important to solve the problem of launch and recovery of torpedo-shaped autonomous underwater vehicles(AUVs).A multi-loop coupling ca...Research of capture mechanisms with strong capture adaptability and stable grasp is important to solve the problem of launch and recovery of torpedo-shaped autonomous underwater vehicles(AUVs).A multi-loop coupling capture mechanism with strong adaptability and high retraction rate has been proposed for the launch and recovery of torpedo-shaped AUVs with different morphological features.Firstly,the principle of capturing motion retraction is described based on the appearance characteristics of torpedo-shaped AUVs,and the configuration synthesis of the capture mechanism is carried out using the method of constrained chain synthesis.Secondly,the screw theory is employed to analyze the degree of freedom(DoF)of the capture mechanism.Then,the 3D model of the capture mechanism is established,and the kinematics and dynamics simulations are carried out.Combined with the capture orientation requirements of the capture mechanism,the statics and vibration characteristics analyses are carried out.Furthermore,considering the capture process and the underwater working environment,the motion characteristics and hydraulics characteristics of the capture mechanism are analyzed.Finally,a principle prototype is developed and the torpedo-shaped AUVs capture experiment is completed.The work provides technical reserves for the research and development of AUV capture special equipment.展开更多
In order to improve the performance and service life of the Leningrader seal of the Stirling engine piston rod,interference,pre-load and friction coefficient were taken as influencing factors,and the curved surface re...In order to improve the performance and service life of the Leningrader seal of the Stirling engine piston rod,interference,pre-load and friction coefficient were taken as influencing factors,and the curved surface response method was adopted to reduce the contact stress of sealing surface and von Mises stress of the sealing sleeve as the response index,with the optimization goal of reducing wear and extending life.The above three key parameters are analyzed and optimized,the influence of each parameter on the sealing performance and service life is obtained,and the best combination scheme of the three is determined.The results show that the interaction between pre-tightening force and interference fit has the greatest impact on contact stress.The interaction between interference fit and friction coeffi-cient has the most significant effect on von Mises stress.The optimized parameters can reduce the maximum contact stress and maximum von Mises stress of the sealing sleeve by 26.3%and 20.6%,respectively,under a media pressure of 5-9 MPa.Test bench verification shows that the leakage of the optimized sealing device in 12 h is reduced by 0.44 cc·min^(-1)(1 cc=1 cm^(3)).The wear rate of the sealing sleeve is 1.08%before optimization and 0.45%after optimization,indicating that the optimized parameters in this paper are effective.展开更多
A large language model(LLM)is constructed to address the sophisticated demands of data retrieval and analysis,detailed well profiling,computation of key technical indicators,and the solutions to complex problems in re...A large language model(LLM)is constructed to address the sophisticated demands of data retrieval and analysis,detailed well profiling,computation of key technical indicators,and the solutions to complex problems in reservoir performance analysis(RPA).The LLM is constructed for RPA scenarios with incremental pre-training,fine-tuning,and functional subsystems coupling.Functional subsystem and efficient coupling methods are proposed based on named entity recognition(NER),tool invocation,and Text-to-SQL construction,all aimed at resolving pivotal challenges in developing the specific application of LLMs for RDA.This study conducted a detailed accuracy test on feature extraction models,tool classification models,data retrieval models and analysis recommendation models.The results indicate that these models have demonstrated good performance in various key aspects of reservoir dynamic analysis.The research takes some injection and production well groups in the PK3 Block of the Daqing Oilfield as an example for testing.Testing results show that our model has significant potential and practical value in assisting reservoir engineers with RDA.The research results provide a powerful support to the application of LLM in reservoir performance analysis.展开更多
In order to optimize the embedded system implementation for Ethernet-based computer numerical control （CNC） system, it is very necessary to establish the performance analysis model and further adopt the codesign met...In order to optimize the embedded system implementation for Ethernet-based computer numerical control （CNC） system, it is very necessary to establish the performance analysis model and further adopt the codesign method from the control, communication and computing perspectives. On the basis of analyzing real-time Ethemet, system architecture, time characteristic parameters of control-loop ere, a performance analysis model for real-time Ethemet-based CNC system was proposed, which is able to include the timing effects caused by the implementation platform in the simulation. The key for establishing the model is accomplished by designing the error analysis module and the controller nodes. Under the restraint of CPU resource and communication bandwidth, the experiment with a case study was conducted, and the results show that if the deadline miss ratio of data packets is 0.2%, then the percentage error is 1.105%. The proposed model can be used at several stages of CNC system development.展开更多
A novel power and cooling system combined system which coupled organic Rankine cycle(ORC) with vapor compression refrigeration cycle(VCRC) was proposed. R245 fa and butane were selected as the working fluid for the po...A novel power and cooling system combined system which coupled organic Rankine cycle(ORC) with vapor compression refrigeration cycle(VCRC) was proposed. R245 fa and butane were selected as the working fluid for the power and refrigeration cycle, respectively. A performance comparison and analysis for the combined system was presented. The results show that dual-pressure ORC-VCRC system can achieve an increase of 7.1% in thermal efficiency and 6.7% in exergy efficiency than that of basic ORC-VCRC. Intermediate pressure is a key parameter to both net power and exergy efficiency of dual-pressure ORC-VCRC system. Combined system can produce maximum net power and exergy efficiency at 0.85 MPa for intermediate pressure and 2.4 MPa for high pressure, respectively. However, superheated temperature at expander inlet has little impact on the two indicators. It can achieve higher overall COP, net power and exergy efficiency at smaller difference between condensation temperature and evaporation temperature of VCRC.展开更多
The problem of state space explosion is still ran outstanding challenge in Markovian performance analysis for multiserver multiqueue (MSMQ) systems. The system behavior of a MSMQ system is described using stochastic h...The problem of state space explosion is still ran outstanding challenge in Markovian performance analysis for multiserver multiqueue (MSMQ) systems. The system behavior of a MSMQ system is described using stochastic high-level Petri net (SHLPN) models, and an approximate performance analysis technique is proposed based on decomposition and refinement methods as well as iteration technique. A real MSMQ system, Web-server cluster, is investigated. The performance of an integrated scheme of request dispatching and scheduling is analyzed with both Poisson and self-similar request arrivals. The study shows that the approximate analysis technique significantly reduces the complexity of the model solution and is also efficient for accuracy of numerical results.展开更多
Micro-forging(MF)is a novel surface modification technology which is capable of smoothening and strengthening the workpiece surface simultaneously.Based on analysis of the mechanism and energy conversion of micro-forg...Micro-forging(MF)is a novel surface modification technology which is capable of smoothening and strengthening the workpiece surface simultaneously.Based on analysis of the mechanism and energy conversion of micro-forging process,an electromagnetically driven microforging system is developed.To further grasp the kinetic characteristic of the equipment,a simulation model is established and its accuracy is verified.With the help of simulation and experimental results,we propose an input voltage optimization method,which drives the micro-forging head moving in a uniform and stable way.In this study,the influence of MF on surface integrity of Ti-6 Al-4 V(TC4)is firstly reported.Experimental results show that MF treatment reduces surface roughness(Ra)and increases micro-hardness by 48%and 11.8%at most,respectively.Besides,a compressive stress layer with an amplitude of-1000 MPa and a depth of 0.8 mm is observed.This study analyzes the performance and reveals the potential of micro-forging technology,which lays a solid foundation for expanding its application in TC4 surface modification.展开更多
Today, in the field of computer networks, new services have been developed on the Internet or intranets, including the mail server, database management, sounds, videos and the web server itself Apache. The number of s...Today, in the field of computer networks, new services have been developed on the Internet or intranets, including the mail server, database management, sounds, videos and the web server itself Apache. The number of solutions for this server is therefore growing continuously, these services are becoming more and more complex and expensive, without being able to fulfill the needs of the users. The absence of benchmarks for websites with dynamic content is the major obstacle to research in this area. These users place high demands on the speed of access to information on the Internet. This is why the performance of the web server is critically important. Several factors influence performance, such as server execution speed, network saturation on the internet or intranet, increased response time, and throughputs. By measuring these factors, we propose a performance evaluation strategy for servers that allows us to determine the actual performance of different servers in terms of user satisfaction. Furthermore, we identified performance characteristics such as throughput, resource utilization, and response time of a system through measurement and modeling by simulation. Finally, we present a simple queue model of an Apache web server, which reasonably represents the behavior of a saturated web server using the Simulink model in Matlab (Matrix Laboratory) and also incorporates sporadic incoming traffic. We obtain server performance metrics such as average response time and throughput through simulations. Compared to other models, our model is conceptually straightforward. The model has been validated through measurements and simulations during the tests that we conducted.展开更多
The diagnosis and prognosis of cardiovascular diseases are critical medical responsibilities that assist cardiologists in correctly classifying patients and treating them accordingly.The utilization of machine learnin...The diagnosis and prognosis of cardiovascular diseases are critical medical responsibilities that assist cardiologists in correctly classifying patients and treating them accordingly.The utilization of machine learning in the medical domain has witnessed a notable surge due to its ability to discern patterns from vast amounts of data.Machine learning algorithms that can categorize cases of cardiovascular illness may help doctors reduce the number of wrong diagnoses.This research investigates the efficacy of different machine learning algorithms in predicting cardiovascular disease in accordance with risk factors.This study utilizes a variety of machine learning models,including Logistic Regression,Random Forest,Decision Tree,Extra Trees classifier,Support Vector Machine(SVM),XGBoost(XGB),Light Gradient Boosting Machine(LGBM),GaussianNB,and Multilayer Perceptron(MLP).The machine learning models are applied to a concrete dataset acquired from Kaggle.The models underwent training using a dataset that was partitioned into an 80:20 ratio.Machine learning model evaluation involves the utilization of performance measurements such as Accuracy,Precision,Recall,and ROC curves.An exhaustive evaluation is carried out to gauge the efficacy of the models.展开更多
In today’s information age,video data,as an important carrier of information,is growing explosively in terms of production volume.The quick and accurate extraction of useful information from massive video data has be...In today’s information age,video data,as an important carrier of information,is growing explosively in terms of production volume.The quick and accurate extraction of useful information from massive video data has become a focus of research in the field of computer vision.AI dynamic recognition technology has become one of the key technologies to address this issue due to its powerful data processing capabilities and intelligent recognition functions.Based on this,this paper first elaborates on the development of intelligent video AI dynamic recognition technology,then proposes several optimization strategies for intelligent video AI dynamic recognition technology,and finally analyzes the performance of intelligent video AI dynamic recognition technology for reference.展开更多
Aiming at the problem of large fading noise in Rayleigh Brillouin optical time domain analysis system, a wavelength scanning technique is proposed to enhance the performance of the temperature sensing system. The prin...Aiming at the problem of large fading noise in Rayleigh Brillouin optical time domain analysis system, a wavelength scanning technique is proposed to enhance the performance of the temperature sensing system. The principle of the proposed technique to reduce the fading noise is introduced based on the analysis of Rayleigh Brillouin optical time domain analysis system. The experimental results show that the signal-to-noise ratio(SNR) at the end of optical fiber with length of 50 m after 17 times wavelength scanning is 5.21 d B higher than that with single wavelength, the Brillouin frequency shift(BFS) on the heated fiber with length of 70 m inserted at the center of sensing fiber can be accurately measured as 0.19 MHz, which is equivalent to a measurement accuracy of 0.19 °C. It indicates that the proposed technique can realize high-accuracy temperature measurement and has huge potential in the field of long-distance and high-accuracy sensing.展开更多
Providing alternative PNT service to GNSS-challenged users will be an important function of next-generation NGSO broadband satellite communication systems.Herein,a packet-based PNT service architecture in NGSO broadba...Providing alternative PNT service to GNSS-challenged users will be an important function of next-generation NGSO broadband satellite communication systems.Herein,a packet-based PNT service architecture in NGSO broadband systems is proposed in which a primary satellite and selected assistant satellites work together to provide PNT service to requesting users.Its positioning performance bounds are mathematically formulated by rigorously analyzing the bounds constrained by different waveforms.Simulations are conducted on different configurations of Walker Delta MEO constellations and Walker Star LEO constellations for corroboration,revealing the following:(1)Both MEO and LEO constellations achieve sub-meter-level positioning precision given enough satellites.(2)Compared to the GNSS Doppler-based velocity estimation method,the position advance based velocity estimation algorithm is more precise and applicable to the PNT service in NGSO broadband systems.(3)To provide PNT service to users in GNSS-challenged environments,the primary and each assistant satellite need only∼0.1‰of the time of one downlink beam.展开更多
基金supported by the National Natural Science Foundation of China under Grant 62131012the Fundamental Research Funds for the Central Universities under Grant 021014380187。
文摘Emulation platforms are critical for evaluation and verification in the research of networking technologies and protocols for space networks(SN).High fidelity emulating technologies have been extensively studied for SN in earlier work,while little emphasis has been placed on the performance evaluation part.In this paper,the design of a network performance analysis architecture is presented,with which high-speed network traffic can be captured and indexed,and the performance of the emulated SN can be well analyzed and evaluated.This architecture comprises three components,namely capture layer,storage layer and analysis layer.Analytic Hierarchy Process(AHP)and several analysis methods are adopted to evaluate the network performance comprehensively.In the implementation of the proposed architecture,configuration optimization and parallel processing are applied to handle large amount of high-speed network traffic.Finally,experiment results through the analysis system exhibits the effectiveness of the proposed architecture.
基金supported in part by the National Natural Science Foundation of China under Grant U21B2014,Grant 92267202,and Grant 62271081.
文摘This paper studies the sensing base station(SBS)that has great potential to improve the safety of vehicles and pedestrians on roads.SBS can detect the targets on the road with communication signals using the integrated sensing and communication(ISAC)technique.Compared with vehicle-mounted radar,SBS has a better sensing field due to its higher deployment position,which can help solve the problem of sensing blind areas.In this paper,key technologies of SBS are studied,including the beamforming algorithm,beam scanning scheme,and interference cancellation algorithm.To transmit and receive ISAC signals simultaneously,a double-coupling antenna array is applied.The free detection beam and directional communication beam are proposed for joint communication and sensing to meet the requirements of beamwidth and pointing directions.The joint timespace-frequency domain division multiple access algorithm is proposed to cancel the interference of SBS,including multiuser interference and duplex interference between sensing and communication.Finally,the sensing and communication performance of SBS under the industrial scientific medical power limitation is analyzed and simulated.Simulation results show that the communication rate of SBS can reach over 100 Mbps and the range of sensing and communication can reach about 500 m.
基金supported by the National Fund for Distinguished Young Scholars(52025072)the National Natural Science Foundation of China(52177012)the Foundation of National Key Laboratory of Science and Technology(614221722051301).
文摘In wideband noncooperative interference cancellation,the reference signals obtained through auxiliary antennas are weighted to cancel with the interference signal.The correlation between the reference signal and the interference signal determines interference cancellation performance,while the auxiliary antenna array affects the correlation by influencing the amplitude and phase of the reference signals.This paper analyzes the effect of auxiliary antenna array on multiple performances of wideband noncooperative interference cancellation.Firstly,the array received signal model of wideband interference is established,and the weight vector coupled with the auxiliary antennas array manifold is solved by spectral analysis and eigen-subspace decomposition.Then,multiple performances which include cancellation resolution,grating null,wideband interference cancellation ratio(ICR),and convergence rate are quantitatively characterized with the auxiliary antenna array.It is obtained through analysis that the performances mutually restrict the auxiliary antenna array.Higher cancellation resolution requires larger array aperture,but when the number of auxiliary antennas is fixed,larger array aperture results in more grating nulls.When the auxiliary antennas are closer to the main antenna,the wideband ICR is improved,but the convergence rate is reduced.The conclusions are verified through simulation of one-dimensional uniform array and two-dimensional nonuniform array.The experiments of three arrays are compared,and the results conform well with simulation and support the theoretical analysis.
基金supported by the National Natural Science Foundation of China(No.12072304).
文摘This paper presents a novel suspension support tailored for wind tunnel tests of spinning projectiles based on Wire-Driven Parallel Robot(WDPR),uniquely characterized by an SPM(Spinning Projectile Model)-centered mobile platform.First,an SPM-centered mobile platform,featuring two redundant and another unconstrained Degree of Freedom(DOF),and its suspension support mechanism are designed together,collectively constructing a WDPR endowed with kinematic redundancy.Afterward,the kinematics of the mechanism,boundary equations for the redundant DOFs,and relevant kinematic performance indices are then proposed and formulated.The results from both prototype experiments and numerical assessments are presented.The capability of the support mechanism to replicate the complex coupled motions of the SPM is verified by the experimental results,while the proposed kinematics and boundary equations are also validated.Furthermore,it is revealed by numerical assessments that the redundant DOFs of the mobile platform exert a minimal impact on the kinematic performance of the suspension support.Finally,the optimal global attitude performance is obtained when these DOFs are set to zero if they are restricted to constants.However,local attitude performance can be further improved by the variable values.
基金supported in part by the MOST Major Research and Development Project(Grant No.2021YFB2900204)the National Natural Science Foundation of China(NSFC)(Grant No.62201123,No.62132004,No.61971102)+3 种基金China Postdoctoral Science Foundation(Grant No.2022TQ0056)in part by the financial support of the Sichuan Science and Technology Program(Grant No.2022YFH0022)Sichuan Major R&D Project(Grant No.22QYCX0168)the Municipal Government of Quzhou(Grant No.2022D031)。
文摘Integrated data and energy transfer(IDET)enables the electromagnetic waves to transmit wireless energy at the same time of data delivery for lowpower devices.In this paper,an energy harvesting modulation(EHM)assisted multi-user IDET system is studied,where all the received signals at the users are exploited for energy harvesting without the degradation of wireless data transfer(WDT)performance.The joint IDET performance is then analysed theoretically by conceiving a practical time-dependent wireless channel.With the aid of the AO based algorithm,the average effective data rate among users are maximized by ensuring the BER and the wireless energy transfer(WET)performance.Simulation results validate and evaluate the IDET performance of the EHM assisted system,which also demonstrates that the optimal number of user clusters and IDET time slots should be allocated,in order to improve the WET and WDT performance.
文摘Serving multiple cell-edge mobile terminals poses multifaceted challenges due to the increased transmission power and interferences, which could be overcome by relay communications. With the recent advancement of 5G technologies, non-orthogonal multiple access(NOMA) has been used at relay node to transmit multiple messages simultaneously to multiple cell-edge users. In this paper, a Collaborative NOMA Assisted Relaying(CNAR) system for 5G is proposed by enabling the collaboration of source-relay(S-R) and relay-destination(R-D) NOMA links. The relay node of the CNAR decodes the message for itself from S-R NOMA signal and transmits the remaining messages to the multiple cell-edge users in R-D link. A simplified-CNAR(S-CNAR) system is then developed to reduce the relay complexity. The outage probabilities for both systems are analyzed by considering outage behaviors in S-R and R-D links separately. To guarantee the data rate, the optimal power allocation among NOMA users is achieved by minimizing the outage probability. The ergodic sum capacity in high SNR regime is also approximated. Our mathematical analysis and simulation results show that CNAR system outperforms existing transmission strategies and S-CNAR reaches similar performance with much lower complexity.
文摘With the increased accessibility of global trade information,transaction fraud has become a major worry in global banking and commerce security.The incidence and magnitude of transaction fraud are increasing daily,resulting in significant financial losses for both customers and financial professionals.With improvements in data mining and machine learning in computer science,the capacity to detect transaction fraud is becoming increasingly attainable.The primary goal of this research is to undertake a comparative examination of cutting-edge machine-learning algorithms developed to detect credit card fraud.The research looks at the efficacy of these machine learning algorithms using a publicly available dataset of credit card transactions performed by European cardholders in 2023,comprising around 550,000 records.The study uses this dataset to assess the performance of well-established machine learning models,measuring their accuracy,recall,and F1 score.In addition,the study includes a confusion matrix for all models to aid in evaluation and training time duration.Machin learning models,including Logistic regression,random forest,extra trees,and LGBM,achieve high accuracy and precision in the credit card fraud detection dataset,with a reported accuracy,recall,and F1 score of 1.00 for both classes.
文摘The importance of cybersecurity in contemporary society cannot be inflated,given the substantial impact of networks on various aspects of daily life.Traditional cybersecurity measures,such as anti-virus software and firewalls,safeguard networks against potential threats.In network security,using Intrusion Detection Systems(IDSs)is vital for effectively monitoring the various software and hardware components inside a given network.However,they may encounter difficulties when it comes to detecting solitary attacks.Machine Learning(ML)models are implemented in intrusion detection widely because of the high accuracy.The present work aims to assess the performance of machine learning algorithms in the context of intrusion detection,providing valuable insights into their efficacy and potential for enhancing cybersecurity measures.The main objective is to compare the performance of the well-knownML models using the UNSW-NB15 dataset.The performance of the models is discussed in detail with a comparison using evaluation metrics and computational performance.
基金supported by the Natural Science Foundation of Jiangsu Province of China(Grant No.BK20220649)the Natural Science Foundation of the Jiangsu Higher Education Institutions(Grant No.23KJB460010)+1 种基金the Key R&D Program of Jiangsu Province(Grant No.BE2022062)Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.SJCX23_2143).
文摘Research of capture mechanisms with strong capture adaptability and stable grasp is important to solve the problem of launch and recovery of torpedo-shaped autonomous underwater vehicles(AUVs).A multi-loop coupling capture mechanism with strong adaptability and high retraction rate has been proposed for the launch and recovery of torpedo-shaped AUVs with different morphological features.Firstly,the principle of capturing motion retraction is described based on the appearance characteristics of torpedo-shaped AUVs,and the configuration synthesis of the capture mechanism is carried out using the method of constrained chain synthesis.Secondly,the screw theory is employed to analyze the degree of freedom(DoF)of the capture mechanism.Then,the 3D model of the capture mechanism is established,and the kinematics and dynamics simulations are carried out.Combined with the capture orientation requirements of the capture mechanism,the statics and vibration characteristics analyses are carried out.Furthermore,considering the capture process and the underwater working environment,the motion characteristics and hydraulics characteristics of the capture mechanism are analyzed.Finally,a principle prototype is developed and the torpedo-shaped AUVs capture experiment is completed.The work provides technical reserves for the research and development of AUV capture special equipment.
基金Supported by the National Natural Science Foundation of China (51675509)Wenzhou Public Welfare Industrial Technology Project (G20170026).
文摘In order to improve the performance and service life of the Leningrader seal of the Stirling engine piston rod,interference,pre-load and friction coefficient were taken as influencing factors,and the curved surface response method was adopted to reduce the contact stress of sealing surface and von Mises stress of the sealing sleeve as the response index,with the optimization goal of reducing wear and extending life.The above three key parameters are analyzed and optimized,the influence of each parameter on the sealing performance and service life is obtained,and the best combination scheme of the three is determined.The results show that the interaction between pre-tightening force and interference fit has the greatest impact on contact stress.The interaction between interference fit and friction coeffi-cient has the most significant effect on von Mises stress.The optimized parameters can reduce the maximum contact stress and maximum von Mises stress of the sealing sleeve by 26.3%and 20.6%,respectively,under a media pressure of 5-9 MPa.Test bench verification shows that the leakage of the optimized sealing device in 12 h is reduced by 0.44 cc·min^(-1)(1 cc=1 cm^(3)).The wear rate of the sealing sleeve is 1.08%before optimization and 0.45%after optimization,indicating that the optimized parameters in this paper are effective.
基金Supported by the National Talent Fund of the Ministry of Science and Technology of China(20230240011)China University of Geosciences(Wuhan)Research Fund(162301192687)。
文摘A large language model(LLM)is constructed to address the sophisticated demands of data retrieval and analysis,detailed well profiling,computation of key technical indicators,and the solutions to complex problems in reservoir performance analysis(RPA).The LLM is constructed for RPA scenarios with incremental pre-training,fine-tuning,and functional subsystems coupling.Functional subsystem and efficient coupling methods are proposed based on named entity recognition(NER),tool invocation,and Text-to-SQL construction,all aimed at resolving pivotal challenges in developing the specific application of LLMs for RDA.This study conducted a detailed accuracy test on feature extraction models,tool classification models,data retrieval models and analysis recommendation models.The results indicate that these models have demonstrated good performance in various key aspects of reservoir dynamic analysis.The research takes some injection and production well groups in the PK3 Block of the Daqing Oilfield as an example for testing.Testing results show that our model has significant potential and practical value in assisting reservoir engineers with RDA.The research results provide a powerful support to the application of LLM in reservoir performance analysis.
基金Projects(50875090,50905063) supported by the National Natural Science Foundation of ChinaProject(2009AA04Z111) supported by the National High Technology Research and Development Program of China+2 种基金Project(20090460769) supported by China Postdoctoral Science FoundationProject(2011ZM0070) supported by the Fundamental Research Funds for the Central Universities in ChinaProject(S2011010001155) supported by the Natural Science Foundation of Guangdong Province,China
文摘In order to optimize the embedded system implementation for Ethernet-based computer numerical control （CNC） system, it is very necessary to establish the performance analysis model and further adopt the codesign method from the control, communication and computing perspectives. On the basis of analyzing real-time Ethemet, system architecture, time characteristic parameters of control-loop ere, a performance analysis model for real-time Ethemet-based CNC system was proposed, which is able to include the timing effects caused by the implementation platform in the simulation. The key for establishing the model is accomplished by designing the error analysis module and the controller nodes. Under the restraint of CPU resource and communication bandwidth, the experiment with a case study was conducted, and the results show that if the deadline miss ratio of data packets is 0.2%, then the percentage error is 1.105%. The proposed model can be used at several stages of CNC system development.
基金Project(12C0379)supported by the Scientific Research Fund of Hunan Province,ChinaProject(13QDZ04)supported by the Scientific Research Foundation for Doctors of Xiangtan University,China
文摘A novel power and cooling system combined system which coupled organic Rankine cycle(ORC) with vapor compression refrigeration cycle(VCRC) was proposed. R245 fa and butane were selected as the working fluid for the power and refrigeration cycle, respectively. A performance comparison and analysis for the combined system was presented. The results show that dual-pressure ORC-VCRC system can achieve an increase of 7.1% in thermal efficiency and 6.7% in exergy efficiency than that of basic ORC-VCRC. Intermediate pressure is a key parameter to both net power and exergy efficiency of dual-pressure ORC-VCRC system. Combined system can produce maximum net power and exergy efficiency at 0.85 MPa for intermediate pressure and 2.4 MPa for high pressure, respectively. However, superheated temperature at expander inlet has little impact on the two indicators. It can achieve higher overall COP, net power and exergy efficiency at smaller difference between condensation temperature and evaporation temperature of VCRC.
文摘The problem of state space explosion is still ran outstanding challenge in Markovian performance analysis for multiserver multiqueue (MSMQ) systems. The system behavior of a MSMQ system is described using stochastic high-level Petri net (SHLPN) models, and an approximate performance analysis technique is proposed based on decomposition and refinement methods as well as iteration technique. A real MSMQ system, Web-server cluster, is investigated. The performance of an integrated scheme of request dispatching and scheduling is analyzed with both Poisson and self-similar request arrivals. The study shows that the approximate analysis technique significantly reduces the complexity of the model solution and is also efficient for accuracy of numerical results.
基金the National Major Science and Technology Projects of China(No.2018ZX04005001-002)State Administration for Science,Technology and Industry for National Defense of China(No.DE0904)Shanghai Academy of Spaceflight Technology of China(No.SAST2018-055)。
文摘Micro-forging(MF)is a novel surface modification technology which is capable of smoothening and strengthening the workpiece surface simultaneously.Based on analysis of the mechanism and energy conversion of micro-forging process,an electromagnetically driven microforging system is developed.To further grasp the kinetic characteristic of the equipment,a simulation model is established and its accuracy is verified.With the help of simulation and experimental results,we propose an input voltage optimization method,which drives the micro-forging head moving in a uniform and stable way.In this study,the influence of MF on surface integrity of Ti-6 Al-4 V(TC4)is firstly reported.Experimental results show that MF treatment reduces surface roughness(Ra)and increases micro-hardness by 48%and 11.8%at most,respectively.Besides,a compressive stress layer with an amplitude of-1000 MPa and a depth of 0.8 mm is observed.This study analyzes the performance and reveals the potential of micro-forging technology,which lays a solid foundation for expanding its application in TC4 surface modification.
文摘Today, in the field of computer networks, new services have been developed on the Internet or intranets, including the mail server, database management, sounds, videos and the web server itself Apache. The number of solutions for this server is therefore growing continuously, these services are becoming more and more complex and expensive, without being able to fulfill the needs of the users. The absence of benchmarks for websites with dynamic content is the major obstacle to research in this area. These users place high demands on the speed of access to information on the Internet. This is why the performance of the web server is critically important. Several factors influence performance, such as server execution speed, network saturation on the internet or intranet, increased response time, and throughputs. By measuring these factors, we propose a performance evaluation strategy for servers that allows us to determine the actual performance of different servers in terms of user satisfaction. Furthermore, we identified performance characteristics such as throughput, resource utilization, and response time of a system through measurement and modeling by simulation. Finally, we present a simple queue model of an Apache web server, which reasonably represents the behavior of a saturated web server using the Simulink model in Matlab (Matrix Laboratory) and also incorporates sporadic incoming traffic. We obtain server performance metrics such as average response time and throughput through simulations. Compared to other models, our model is conceptually straightforward. The model has been validated through measurements and simulations during the tests that we conducted.
文摘The diagnosis and prognosis of cardiovascular diseases are critical medical responsibilities that assist cardiologists in correctly classifying patients and treating them accordingly.The utilization of machine learning in the medical domain has witnessed a notable surge due to its ability to discern patterns from vast amounts of data.Machine learning algorithms that can categorize cases of cardiovascular illness may help doctors reduce the number of wrong diagnoses.This research investigates the efficacy of different machine learning algorithms in predicting cardiovascular disease in accordance with risk factors.This study utilizes a variety of machine learning models,including Logistic Regression,Random Forest,Decision Tree,Extra Trees classifier,Support Vector Machine(SVM),XGBoost(XGB),Light Gradient Boosting Machine(LGBM),GaussianNB,and Multilayer Perceptron(MLP).The machine learning models are applied to a concrete dataset acquired from Kaggle.The models underwent training using a dataset that was partitioned into an 80:20 ratio.Machine learning model evaluation involves the utilization of performance measurements such as Accuracy,Precision,Recall,and ROC curves.An exhaustive evaluation is carried out to gauge the efficacy of the models.
文摘In today’s information age,video data,as an important carrier of information,is growing explosively in terms of production volume.The quick and accurate extraction of useful information from massive video data has become a focus of research in the field of computer vision.AI dynamic recognition technology has become one of the key technologies to address this issue due to its powerful data processing capabilities and intelligent recognition functions.Based on this,this paper first elaborates on the development of intelligent video AI dynamic recognition technology,then proposes several optimization strategies for intelligent video AI dynamic recognition technology,and finally analyzes the performance of intelligent video AI dynamic recognition technology for reference.
基金supported by the National Natural Science Foundation of China(No.61377088)the Natural Science Foundation of Hebei Province of China(Nos.E2015502053 and F2015502059)the Fundamental Research Funds for the Central Universities(No.2016XS104)
文摘Aiming at the problem of large fading noise in Rayleigh Brillouin optical time domain analysis system, a wavelength scanning technique is proposed to enhance the performance of the temperature sensing system. The principle of the proposed technique to reduce the fading noise is introduced based on the analysis of Rayleigh Brillouin optical time domain analysis system. The experimental results show that the signal-to-noise ratio(SNR) at the end of optical fiber with length of 50 m after 17 times wavelength scanning is 5.21 d B higher than that with single wavelength, the Brillouin frequency shift(BFS) on the heated fiber with length of 70 m inserted at the center of sensing fiber can be accurately measured as 0.19 MHz, which is equivalent to a measurement accuracy of 0.19 °C. It indicates that the proposed technique can realize high-accuracy temperature measurement and has huge potential in the field of long-distance and high-accuracy sensing.
基金the National Key Research and Development Program of China(2020YFB1804800)the National Natural Science Foundation of China(No.62071270).
文摘Providing alternative PNT service to GNSS-challenged users will be an important function of next-generation NGSO broadband satellite communication systems.Herein,a packet-based PNT service architecture in NGSO broadband systems is proposed in which a primary satellite and selected assistant satellites work together to provide PNT service to requesting users.Its positioning performance bounds are mathematically formulated by rigorously analyzing the bounds constrained by different waveforms.Simulations are conducted on different configurations of Walker Delta MEO constellations and Walker Star LEO constellations for corroboration,revealing the following:(1)Both MEO and LEO constellations achieve sub-meter-level positioning precision given enough satellites.(2)Compared to the GNSS Doppler-based velocity estimation method,the position advance based velocity estimation algorithm is more precise and applicable to the PNT service in NGSO broadband systems.(3)To provide PNT service to users in GNSS-challenged environments,the primary and each assistant satellite need only∼0.1‰of the time of one downlink beam.
