The objective and constraint functions related to structural optimization designs are classified into economic and performance indexes in this paper.The influences of their different roles in model construction of str...The objective and constraint functions related to structural optimization designs are classified into economic and performance indexes in this paper.The influences of their different roles in model construction of structural topology optimization are also discussed.Furthermore,two structural topology optimization models,optimizing a performance index under the limitation of an economic index,represented by the minimum compliance with a volume constraint（MCVC）model,and optimizing an economic index under the limitation of a performance index,represented by the minimum weight with a displacement constraint（MWDC）model,are presented.Based on a comparison of numerical example results,the conclusions can be summarized as follows：（1）under the same external loading and displacement performance conditions,the results of the MWDC model are almost equal to those of the MCVC model;（2）the MWDC model overcomes the difficulties and shortcomings of the MCVC model;this makes the MWDC model more feasible in model construction;（3）constructing a model of minimizing an economic index under the limitations of performance indexes is better at meeting the needs of practical engineering problems and completely satisfies safety and economic requirements in mechanical engineering,which have remained unchanged since the early days of mechanical engineering.展开更多
Objective Assessment of right ventricular function in patients with atrial septal defect(ASD)is difficult.The Doppler myocardial performance index(MPI)may provide a method of assessing function in these patients.The p...Objective Assessment of right ventricular function in patients with atrial septal defect(ASD)is difficult.The Doppler myocardial performance index(MPI)may provide a method of assessing function in these patients.The purposes of this study were to evaluate the right ventricular function and its changes in patients with ASD after transcatheter closure of ASD.Methods MPI,defined as the sum of isovolumic relaxation time and isovolumic contraction time derived by ejection time,was measured from tricuspid inflow and right ventricular outflow;Doppler velocity profiles recorded during routine echocardiography.Twenty nine patients(13 men,16 women;mean age 25.28±12.69,range 6 to 57 years)were diagnosed to secundum ASD[the stretched diameters of ASD were from 9 To 36(24.91±7.98)mm],and had a successfully placed Amplatzer septal occluder(ASO)(the sizes of ASO were from 11 to 40 mm);there were 81 sex-matched,age-matched healthy people(control group 41men,40 women;mean age 29.02±14.22,range 4 to 45 years).MPI was measured again on 3 days and 1 month after closure of ASD.Change in the study group was assessed and compared to the control subjects with structurally normal hearts.A complete 2-dimensional and Doppler echocardiographic examination was performed in all study groups.Results 1)The isovolumic relaxation and isovolumic contraction times[respectively(77.59±14.39)ms vs(60.93±12.94)ms,P<0.0001;(28.28±10.88)ms vs(23.64±9.01)ms,P=0.027]were prolonged,and ejection time[(260.65±21.86)ms vs(271.85±21.92)ms,P=0.033]was shortened in patients with ASD compared with that in control subjects,resulting in a marked increase in the MPI(0.40±0.07 vs 0.31±0.05,P<0.0001)from normal values;2)by Pearson's correlations,the MPI had no correlation with heart rate and blood pressure in control subjects and patients with ASD,but it correlated positively with age in patients with ASD;3)by Pearson's correlations,the MPI correlated positively with the diameter of ASD and pulmonary artery pressure;4)after transcatheter closure of ASD,the MPI decreased markedly.Conclusions 1)MPI is a conceptually new,simple,and reproducible Doppler index in patients with ASD;2)MPI is free from the effect of age,heart rate and blood pressure;(3)MPI appears to be relatively dependent on changes in the diameter of ASD and pulmonary artery pressure;4)the right ventricular function was improved after transcatheter closure of ASD.展开更多
The deformation performance index limits of high reinforced concrete （RC） shear wall components based on Chinese codes were discussed by the nonlinear finite element method. Two typical RC shear wall specimens in th...The deformation performance index limits of high reinforced concrete （RC） shear wall components based on Chinese codes were discussed by the nonlinear finite element method. Two typical RC shear wall specimens in the previous work were first used to verify the correctness of the nonlinear finite element method. Then, the nonlinear finite element method was applied to study the deformability of a set of high RC shear wall components designed according to current Chinese codes and with shear span ratio λ≥2.0. Parametric studies were made on the influence of shear span ratio, axial compression ratio, ratio of flexural capacity to shear capacity and main flexural reinforcement ratio of confined botmdary members. Finally, the deformation performance index and its limits of high RC shear wall components under severe earthquakes were proposed by the finite element model results, which offers a reference in determining the performance status of RC shear wall components designed based on Chinese codes.展开更多
Hamiltonian function is firstly constituted for solving optimal control. When character of controlled object is known,Hamiltonian function is determined by performance index. In this paper,by constituting Hamiltonian ...Hamiltonian function is firstly constituted for solving optimal control. When character of controlled object is known,Hamiltonian function is determined by performance index. In this paper,by constituting Hamiltonian function and solving optimal control of a sort of performance index,we can understand optimal control theory and apply optimal control method better.展开更多
In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data be...In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.展开更多
This study involved numerical simulations of a double tube heat exchanger using the ANSYS FLUENT programversion 22.The study aims to examine methods for minimizing pressure loss and consequently enhancing the thermal ...This study involved numerical simulations of a double tube heat exchanger using the ANSYS FLUENT programversion 22.The study aims to examine methods for minimizing pressure loss and consequently enhancing the thermal performance index(TPI)of a heat exchanger fitted with wavy edge tape that is a heat recovery system(the hot air in simulation instead of t heat from the exhaust gases of the brick factory furnaces and return it to warm the heavy fuel oil by substituting the electrical heater with a heat exchanger to recuperate waste heat from the flue gases,so elevating the temperature of Heavy fuel oil(HFO)to inject from the roof nozzles of combustion chamber of the furnace furthermore reducing cost(by finding the optimal design of wavy edge tape))and energy consumption.Air was selected as the hot gas in the inner pipe instead of furnace exhaust gases due to their similar thermal characteristics.A numerical analysis was conducted to create a novel wavy edge tape with varying widths(50%Di,75%Di,and 95%Di),lengths(1000,1200,1400)mm,amplitudes(5,10,15)mm,and periods of wavy length(5,10,15)mm.The flow rate of the outer pipe fluid(oil)ranges from(0.06 to 0.1)kg/s,while the velocity of the hot fluid(air)varies from(1 to 27)m/s,Re_(air)(6957 to 187,837).The entrance temperature of the hot fluid can be either(200,225,and 250)℃.The study finds that wavy edge tape tubes are more effective than smooth tubes in terms of oil outlet temperature;results revealed that an increase in the oil mass flow rate leads to a decrease in the oil outlet temperature and an increase in the heat transfer rate,at the air temperature 250℃.Additionally,the results indicate that increasing the width,length,and amplitude also leads to an increase in the oil outlet temperature of(94-94.12)℃,the pressure drop of(568.3)Pa,and the Nusselt number(65.7-66.5)respectively on the oil side.Finally,the heat exchanger’s best thermal performance index was found by investigating temperature contour at amplitude(A=5),period(p=15),width(w=75%Di),and length(L=1200 mm).The values for these parameters are,in order(1.02,1.025,1.02,and 1.0077).展开更多
The Code for Seismic Design of Buildings(GB50011-2010)in 2016 and the method of seismic performance-based design for high-rise buildings in the Guide for Performance-based Design of High-Rise Buildings(TBI2017)are com...The Code for Seismic Design of Buildings(GB50011-2010)in 2016 and the method of seismic performance-based design for high-rise buildings in the Guide for Performance-based Design of High-Rise Buildings(TBI2017)are compared.In view of the characteristics and limitations of the seismic performance index set by the Sino-US seismic code,a“three-index”performance index system and evaluation process considering the displacement angle of the structural interlayer,the plastic damage degree of components and the plastic strain of material is put forward;combining the example of time-history analysis of a out-of-code high-rise building under the rare earthquakes is verified.The results show that the method of seismic performance evaluation by using deformation control index in Sino-US seismic code is relatively simple;however,both are lacking in the setting of specific components and the whole structure level respectively.The"three-index"system can comprehensively and quantitatively evaluate the seismic performance of out-of-code high-rise buildings.展开更多
Lifetime performance index is a powerful and effective way to analyze whether a product achieves the specified standards.In this paper,we investigate the lifetime performance index for the inverted exponential Rayleig...Lifetime performance index is a powerful and effective way to analyze whether a product achieves the specified standards.In this paper,we investigate the lifetime performance index for the inverted exponential Rayleigh distribution using progressive type II censored sample data.The censored sample is able to greatly save the cost of the experiment and speed up the experiment.We derive the estimation value of lifetime performance index using the maximum likelihood method,and conduct the hypothesis test.Based on extensive numerical simulation,the power function is utilized to assess effectiveness of hypothesis testing.The simulation results show that lifetime performance index is good for determining whether the lifetime of the product reaches the criterion.Finally,a practical dataset is provided to give a demonstration for the procedures of lifetime performance evaluation.展开更多
This paper is devoted to the construct of the maximum likelihood estimator of the life-time performance index based on first-failure progressive right type censored sample for Lindley distribution. Statistical infere...This paper is devoted to the construct of the maximum likelihood estimator of the life-time performance index based on first-failure progressive right type censored sample for Lindley distribution. Statistical inference for assessing the lifetime performance of the items is performed. Finally, two examples are given, one of them considers a real life application of blood samples from organ transplant recipient using the liquid chromatography （HPLC） data and the other is a simulated example to illustrate the proposed statistical procedure.展开更多
In this paper,Health-related quality of life has not been adequately measured in bladder cancer.A recently developed reliable and disease-specific quality of life instrument(Bladder Cancer Index,RCI)was used to measur...In this paper,Health-related quality of life has not been adequately measured in bladder cancer.A recently developed reliable and disease-specific quality of life instrument(Bladder Cancer Index,RCI)was used to measure.Progressive type Ⅱ censoring schemes have potential usefulness in practice where budget constraints in place or there is a necessity for the speedy test.To test the process capability,the lifetime performance index Cl is widely recommended for evaluating the performance of the producfs lifetime and evaluating the lifetime performance index GL for the three-parameter Weighted-Lomax distribution(WLx)under progressive type-II censoring sample for a lower specification limit(L).The statistical inference concerning CL is conducted via obtaining the maximum likelihood of Cl on the base of progressive type-II censoring.The asymptotic normal distribution of the MLE of CL and the confidence interval is proposed.Moreover,the hypothesis testing of CL for evaluating the lifetime performance of WLx data is conducted.Also,assuming the conjugate prior distribution and squared error loss function,this study constructs a Bayes estimator of CL.The Bayes estimator of CL is then utilized to develop a credible interval in the condition of known L.Moreover,we propose a Bayesian test to assess the lifetime performance of products.We also propose a Bayesian test to assess the lifetime performance of products.Finally,two examples are given,one of them is considering a real life data of the remission times of bladder cancer patients in endurance lifetime test and the other is a simulated example to illustrate the usage of the proposed procedure.展开更多
Reconfigurable parallel mechanisms were first discovered in response to the growing demand for flexible and adaptive systems in various fields.Unlike traditional mechanisms,which are designed for specific tasks and ha...Reconfigurable parallel mechanisms were first discovered in response to the growing demand for flexible and adaptive systems in various fields.Unlike traditional mechanisms,which are designed for specific tasks and have fixed topology and mobility characteristics,a reconfigurable parallel mechanism can be adapted to different situations by changing its structure,motion,and function.This adaptability enables a single mechanism to perform a wide range of tasks,reducing the need for multiple dedicated systems.This paper presents a comprehensive review of reconfigurable parallel mechanisms.The characteristics of their designs,analyses of their properties,and challenges they face are reported.The beginning of this paper features an introduction of reconfigurable parallel mechanisms and their classification into different types.Methods for synthesizing reconfigurable parallel mechanisms are discussed.A performance evaluation index related to reconfigurability,workspace,singularity,stiffness,and dynamics,among other indices,is presented.This review covers the challenges faced in the creation of systematic design theories,unified performance analyses,evaluation index systems,and in the implementation of reconfigurable parallel mechanisms,such as the development of efficient control strategies and integration with other technologies.The paper concludes with a discussion of future research directions for reconfigurable parallel mechanisms.展开更多
Forests produce several types of benefits to both forest landowners and society.The social benefit of private forestry is equal to private benefit plus positive externalities minus negative externalities.This study de...Forests produce several types of benefits to both forest landowners and society.The social benefit of private forestry is equal to private benefit plus positive externalities minus negative externalities.This study developed alternative metrics for the evaluation of the social benefit of forest management.Forest management was assessed in terms of five criteria:economic,socio-cultural,environmental and ecological performance and the resilience of the forest ecosystem.Each criterion was described with three numerical indicators.Alternative performance indices were calculated from the indicator values using methods developed for multi-criteria decision making.It was concluded that indices based on the multiplicative Cobb-Douglas utility function might be the most recommendable when forestry should produce a balanced combination of different ecosystem services.When the indices were used to compare alternative silvicultural systems in terms of their social performance,continuous cover management was ranked better than even-aged management.The performance of even-aged management improved when it aimed at increasing the share of mixed stands and broadleaf species.Maximizing net present value(NPV) with a 1 % discount rate led to better social performance than maximizing NPV with a 4% discount rate.展开更多
The exhaust emissions and frequent traffic incidents caused by traffic congestion have affected the operation and development of urban transport systems.Monitoring and accurately forecasting urban traffic operation is...The exhaust emissions and frequent traffic incidents caused by traffic congestion have affected the operation and development of urban transport systems.Monitoring and accurately forecasting urban traffic operation is a critical task to formulate pertinent strategies to alleviate traffic congestion.Compared with traditional short-time traffic prediction,this study proposes a machine learning algorithm-based traffic forecasting model for daily-level peak hour traffic operation status prediction by using abundant historical data of urban traffic performance index(TPI).The study also constructed a multi-dimensional influencing factor set to further investigate the relationship between different factors on the quality of road network operation,including day of week,time period,public holiday,car usage restriction policy,special events,etc.Based on long-term historical TPI data,this research proposed a daily dimensional road network TPI prediction model by using an extreme gradient boosting algorithm(XGBoost).The model validation results show that the model prediction accuracy can reach higher than 90%.Compared with other prediction models,including Bayesian Ridge,Linear Regression,ElatsicNet,SVR,the XGBoost model has a better performance,and proves its superiority in large high-dimensional data sets.The daily dimensional prediction model proposed in this paper has an important application value for predicting traffic status and improving the operation quality of urban road networks.展开更多
The H∞ proportional-integral-differential(PID) feedback for arbitrary-order delayed multi-agent system is investigated to improve the system performance. The closed-loop multi-input multi-output(MIMO) control framewo...The H∞ proportional-integral-differential(PID) feedback for arbitrary-order delayed multi-agent system is investigated to improve the system performance. The closed-loop multi-input multi-output(MIMO) control framework with the distributed PID controller is firstly described for the multi-agent system in a unified way. Then, by using the matrix theory, the prescribed H∞performance criterion of the multi-agent system is shown to be equivalent to several independent H∞ performance constraints of the single-input single-output(SISO) subsystem with respect to the eigenvalues of the Laplacian matrix. Subsequently, for each subsystem,the set of the PID controllers satisfying the required H∞ performance constraint is analytically characterized based on the extended Hermite-Biehler theorem. Finally, the three-dimensional set of the decentralized H∞ PID control parameters is derived by finding the intersection of the H∞ PID regions for all the decomposed subsystems. The simulation results reveal the effectiveness of the proposed method.展开更多
A newly designed approach of simultaneous stabilization is given for linear discrete time-delay systems. The problem of stabilization for a collection of systems is discussed initially. Adequate condition are obtained...A newly designed approach of simultaneous stabilization is given for linear discrete time-delay systems. The problem of stabilization for a collection of systems is discussed initially. Adequate condition are obtained in terms of linear matrix inequalities （LMIs） which are independent of time delays such that the resultant collection of discrete time-delay systems are stable with an upper bound of the quadratic performance index. Subsequently, controllers are designed such that the resultant closed-loop discrete time-delay systems are simultaneously stabilized with the upper bound of the quadratic performance index. Finally,a numerical example is given to illustrate the design method.展开更多
This paper studies the evaluation method of the performances of corporation that was set up by the Financial Ministry in 1999, and then analyzes the advantages and the problems of the method. Finally, this paper studi...This paper studies the evaluation method of the performances of corporation that was set up by the Financial Ministry in 1999, and then analyzes the advantages and the problems of the method. Finally, this paper studies the theoretical method of the evaluation of the performances of corporation.展开更多
Knowledge has become the most important strategic resource of firms, and the competition among firms is more based on knowledge than before. To deal with this challenge, some firms are trying to develop knowledge stra...Knowledge has become the most important strategic resource of firms, and the competition among firms is more based on knowledge than before. To deal with this challenge, some firms are trying to develop knowledge strategies to direct their knowledge management activities, but current strategic performance measurement systems can＇t evaluate the performance of knowledge strategies appropriately. This article develops a performance measurement system for knowledge strategies based on Balanced Scorecard, and simulates the system with an improved Data Envelopment Analysis （DEA） model.展开更多
How the performance in the course of implementing the logistics network organization is, and how the benefit level is produced, are undoubtedly focuses that cooperative parties pay close attention to, and the key to t...How the performance in the course of implementing the logistics network organization is, and how the benefit level is produced, are undoubtedly focuses that cooperative parties pay close attention to, and the key to the network organization, too. The research on the performance appraisement about the network organization is not only very necessary, but also very important. This paper describes the characteristics of the performance appraisement about the logistics network organization, and sets up the evaluation index through analyzing the principle of constituting the logistics network organization＇s performance index system.展开更多
Restructured electric market environment allows the power wheeling transactions between the power producers and customers to meet the growing load demand. This will lead to the possible of congestion in the transmissi...Restructured electric market environment allows the power wheeling transactions between the power producers and customers to meet the growing load demand. This will lead to the possible of congestion in the transmission lines. The possible contingencies of power components further worsen the scenario. This paper describes the methodology for the identification of critical transmission line by computing the real power and reactive power performance indices. It also demonstrates the importance of fuzzy logic technique used to rank the transmission lines according to the severity and demonstrated on IEEE-30 bus system.展开更多
基金supported by the National Natural Science Foundation of China(Grant 11172013)
文摘The objective and constraint functions related to structural optimization designs are classified into economic and performance indexes in this paper.The influences of their different roles in model construction of structural topology optimization are also discussed.Furthermore,two structural topology optimization models,optimizing a performance index under the limitation of an economic index,represented by the minimum compliance with a volume constraint（MCVC）model,and optimizing an economic index under the limitation of a performance index,represented by the minimum weight with a displacement constraint（MWDC）model,are presented.Based on a comparison of numerical example results,the conclusions can be summarized as follows：（1）under the same external loading and displacement performance conditions,the results of the MWDC model are almost equal to those of the MCVC model;（2）the MWDC model overcomes the difficulties and shortcomings of the MCVC model;this makes the MWDC model more feasible in model construction;（3）constructing a model of minimizing an economic index under the limitations of performance indexes is better at meeting the needs of practical engineering problems and completely satisfies safety and economic requirements in mechanical engineering,which have remained unchanged since the early days of mechanical engineering.
文摘Objective Assessment of right ventricular function in patients with atrial septal defect(ASD)is difficult.The Doppler myocardial performance index(MPI)may provide a method of assessing function in these patients.The purposes of this study were to evaluate the right ventricular function and its changes in patients with ASD after transcatheter closure of ASD.Methods MPI,defined as the sum of isovolumic relaxation time and isovolumic contraction time derived by ejection time,was measured from tricuspid inflow and right ventricular outflow;Doppler velocity profiles recorded during routine echocardiography.Twenty nine patients(13 men,16 women;mean age 25.28±12.69,range 6 to 57 years)were diagnosed to secundum ASD[the stretched diameters of ASD were from 9 To 36(24.91±7.98)mm],and had a successfully placed Amplatzer septal occluder(ASO)(the sizes of ASO were from 11 to 40 mm);there were 81 sex-matched,age-matched healthy people(control group 41men,40 women;mean age 29.02±14.22,range 4 to 45 years).MPI was measured again on 3 days and 1 month after closure of ASD.Change in the study group was assessed and compared to the control subjects with structurally normal hearts.A complete 2-dimensional and Doppler echocardiographic examination was performed in all study groups.Results 1)The isovolumic relaxation and isovolumic contraction times[respectively(77.59±14.39)ms vs(60.93±12.94)ms,P<0.0001;(28.28±10.88)ms vs(23.64±9.01)ms,P=0.027]were prolonged,and ejection time[(260.65±21.86)ms vs(271.85±21.92)ms,P=0.033]was shortened in patients with ASD compared with that in control subjects,resulting in a marked increase in the MPI(0.40±0.07 vs 0.31±0.05,P<0.0001)from normal values;2)by Pearson's correlations,the MPI had no correlation with heart rate and blood pressure in control subjects and patients with ASD,but it correlated positively with age in patients with ASD;3)by Pearson's correlations,the MPI correlated positively with the diameter of ASD and pulmonary artery pressure;4)after transcatheter closure of ASD,the MPI decreased markedly.Conclusions 1)MPI is a conceptually new,simple,and reproducible Doppler index in patients with ASD;2)MPI is free from the effect of age,heart rate and blood pressure;(3)MPI appears to be relatively dependent on changes in the diameter of ASD and pulmonary artery pressure;4)the right ventricular function was improved after transcatheter closure of ASD.
基金Project(2009ZA04) supported by the Independent Research Foundation of State Key Laboratory of Subtropical Architecture Science,China
文摘The deformation performance index limits of high reinforced concrete （RC） shear wall components based on Chinese codes were discussed by the nonlinear finite element method. Two typical RC shear wall specimens in the previous work were first used to verify the correctness of the nonlinear finite element method. Then, the nonlinear finite element method was applied to study the deformability of a set of high RC shear wall components designed according to current Chinese codes and with shear span ratio λ≥2.0. Parametric studies were made on the influence of shear span ratio, axial compression ratio, ratio of flexural capacity to shear capacity and main flexural reinforcement ratio of confined botmdary members. Finally, the deformation performance index and its limits of high RC shear wall components under severe earthquakes were proposed by the finite element model results, which offers a reference in determining the performance status of RC shear wall components designed based on Chinese codes.
文摘Hamiltonian function is firstly constituted for solving optimal control. When character of controlled object is known,Hamiltonian function is determined by performance index. In this paper,by constituting Hamiltonian function and solving optimal control of a sort of performance index,we can understand optimal control theory and apply optimal control method better.
基金supported in part by the National Natural Science Foundation of China(62125306)Zhejiang Key Research and Development Project(2024C01163)the State Key Laboratory of Industrial Control Technology,China(ICT2024A06)
文摘In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.
文摘This study involved numerical simulations of a double tube heat exchanger using the ANSYS FLUENT programversion 22.The study aims to examine methods for minimizing pressure loss and consequently enhancing the thermal performance index(TPI)of a heat exchanger fitted with wavy edge tape that is a heat recovery system(the hot air in simulation instead of t heat from the exhaust gases of the brick factory furnaces and return it to warm the heavy fuel oil by substituting the electrical heater with a heat exchanger to recuperate waste heat from the flue gases,so elevating the temperature of Heavy fuel oil(HFO)to inject from the roof nozzles of combustion chamber of the furnace furthermore reducing cost(by finding the optimal design of wavy edge tape))and energy consumption.Air was selected as the hot gas in the inner pipe instead of furnace exhaust gases due to their similar thermal characteristics.A numerical analysis was conducted to create a novel wavy edge tape with varying widths(50%Di,75%Di,and 95%Di),lengths(1000,1200,1400)mm,amplitudes(5,10,15)mm,and periods of wavy length(5,10,15)mm.The flow rate of the outer pipe fluid(oil)ranges from(0.06 to 0.1)kg/s,while the velocity of the hot fluid(air)varies from(1 to 27)m/s,Re_(air)(6957 to 187,837).The entrance temperature of the hot fluid can be either(200,225,and 250)℃.The study finds that wavy edge tape tubes are more effective than smooth tubes in terms of oil outlet temperature;results revealed that an increase in the oil mass flow rate leads to a decrease in the oil outlet temperature and an increase in the heat transfer rate,at the air temperature 250℃.Additionally,the results indicate that increasing the width,length,and amplitude also leads to an increase in the oil outlet temperature of(94-94.12)℃,the pressure drop of(568.3)Pa,and the Nusselt number(65.7-66.5)respectively on the oil side.Finally,the heat exchanger’s best thermal performance index was found by investigating temperature contour at amplitude(A=5),period(p=15),width(w=75%Di),and length(L=1200 mm).The values for these parameters are,in order(1.02,1.025,1.02,and 1.0077).
文摘The Code for Seismic Design of Buildings(GB50011-2010)in 2016 and the method of seismic performance-based design for high-rise buildings in the Guide for Performance-based Design of High-Rise Buildings(TBI2017)are compared.In view of the characteristics and limitations of the seismic performance index set by the Sino-US seismic code,a“three-index”performance index system and evaluation process considering the displacement angle of the structural interlayer,the plastic damage degree of components and the plastic strain of material is put forward;combining the example of time-history analysis of a out-of-code high-rise building under the rare earthquakes is verified.The results show that the method of seismic performance evaluation by using deformation control index in Sino-US seismic code is relatively simple;however,both are lacking in the setting of specific components and the whole structure level respectively.The"three-index"system can comprehensively and quantitatively evaluate the seismic performance of out-of-code high-rise buildings.
文摘Lifetime performance index is a powerful and effective way to analyze whether a product achieves the specified standards.In this paper,we investigate the lifetime performance index for the inverted exponential Rayleigh distribution using progressive type II censored sample data.The censored sample is able to greatly save the cost of the experiment and speed up the experiment.We derive the estimation value of lifetime performance index using the maximum likelihood method,and conduct the hypothesis test.Based on extensive numerical simulation,the power function is utilized to assess effectiveness of hypothesis testing.The simulation results show that lifetime performance index is good for determining whether the lifetime of the product reaches the criterion.Finally,a practical dataset is provided to give a demonstration for the procedures of lifetime performance evaluation.
文摘This paper is devoted to the construct of the maximum likelihood estimator of the life-time performance index based on first-failure progressive right type censored sample for Lindley distribution. Statistical inference for assessing the lifetime performance of the items is performed. Finally, two examples are given, one of them considers a real life application of blood samples from organ transplant recipient using the liquid chromatography （HPLC） data and the other is a simulated example to illustrate the proposed statistical procedure.
文摘In this paper,Health-related quality of life has not been adequately measured in bladder cancer.A recently developed reliable and disease-specific quality of life instrument(Bladder Cancer Index,RCI)was used to measure.Progressive type Ⅱ censoring schemes have potential usefulness in practice where budget constraints in place or there is a necessity for the speedy test.To test the process capability,the lifetime performance index Cl is widely recommended for evaluating the performance of the producfs lifetime and evaluating the lifetime performance index GL for the three-parameter Weighted-Lomax distribution(WLx)under progressive type-II censoring sample for a lower specification limit(L).The statistical inference concerning CL is conducted via obtaining the maximum likelihood of Cl on the base of progressive type-II censoring.The asymptotic normal distribution of the MLE of CL and the confidence interval is proposed.Moreover,the hypothesis testing of CL for evaluating the lifetime performance of WLx data is conducted.Also,assuming the conjugate prior distribution and squared error loss function,this study constructs a Bayes estimator of CL.The Bayes estimator of CL is then utilized to develop a credible interval in the condition of known L.Moreover,we propose a Bayesian test to assess the lifetime performance of products.We also propose a Bayesian test to assess the lifetime performance of products.Finally,two examples are given,one of them is considering a real life data of the remission times of bladder cancer patients in endurance lifetime test and the other is a simulated example to illustrate the usage of the proposed procedure.
基金the financial support from the Research Institute for Artificial Intelligence of Things(RIAIoT)the Research Institute for Advanced Manufacturing(RIAM)+1 种基金the Research Institute for Intelligent Wearable Systems(RI-IWEAR)the Research Centre of Textiles for Future Fashion(RCTFF)at the Hong Kong Polytechnic University。
文摘Reconfigurable parallel mechanisms were first discovered in response to the growing demand for flexible and adaptive systems in various fields.Unlike traditional mechanisms,which are designed for specific tasks and have fixed topology and mobility characteristics,a reconfigurable parallel mechanism can be adapted to different situations by changing its structure,motion,and function.This adaptability enables a single mechanism to perform a wide range of tasks,reducing the need for multiple dedicated systems.This paper presents a comprehensive review of reconfigurable parallel mechanisms.The characteristics of their designs,analyses of their properties,and challenges they face are reported.The beginning of this paper features an introduction of reconfigurable parallel mechanisms and their classification into different types.Methods for synthesizing reconfigurable parallel mechanisms are discussed.A performance evaluation index related to reconfigurability,workspace,singularity,stiffness,and dynamics,among other indices,is presented.This review covers the challenges faced in the creation of systematic design theories,unified performance analyses,evaluation index systems,and in the implementation of reconfigurable parallel mechanisms,such as the development of efficient control strategies and integration with other technologies.The paper concludes with a discussion of future research directions for reconfigurable parallel mechanisms.
文摘Forests produce several types of benefits to both forest landowners and society.The social benefit of private forestry is equal to private benefit plus positive externalities minus negative externalities.This study developed alternative metrics for the evaluation of the social benefit of forest management.Forest management was assessed in terms of five criteria:economic,socio-cultural,environmental and ecological performance and the resilience of the forest ecosystem.Each criterion was described with three numerical indicators.Alternative performance indices were calculated from the indicator values using methods developed for multi-criteria decision making.It was concluded that indices based on the multiplicative Cobb-Douglas utility function might be the most recommendable when forestry should produce a balanced combination of different ecosystem services.When the indices were used to compare alternative silvicultural systems in terms of their social performance,continuous cover management was ranked better than even-aged management.The performance of even-aged management improved when it aimed at increasing the share of mixed stands and broadleaf species.Maximizing net present value(NPV) with a 1 % discount rate led to better social performance than maximizing NPV with a 4% discount rate.
基金funded by the National Natural Science Foundation of China(NFSC)(No.52072011)。
文摘The exhaust emissions and frequent traffic incidents caused by traffic congestion have affected the operation and development of urban transport systems.Monitoring and accurately forecasting urban traffic operation is a critical task to formulate pertinent strategies to alleviate traffic congestion.Compared with traditional short-time traffic prediction,this study proposes a machine learning algorithm-based traffic forecasting model for daily-level peak hour traffic operation status prediction by using abundant historical data of urban traffic performance index(TPI).The study also constructed a multi-dimensional influencing factor set to further investigate the relationship between different factors on the quality of road network operation,including day of week,time period,public holiday,car usage restriction policy,special events,etc.Based on long-term historical TPI data,this research proposed a daily dimensional road network TPI prediction model by using an extreme gradient boosting algorithm(XGBoost).The model validation results show that the model prediction accuracy can reach higher than 90%.Compared with other prediction models,including Bayesian Ridge,Linear Regression,ElatsicNet,SVR,the XGBoost model has a better performance,and proves its superiority in large high-dimensional data sets.The daily dimensional prediction model proposed in this paper has an important application value for predicting traffic status and improving the operation quality of urban road networks.
基金supported by National Natural Science Foundationof China(Nos.61273116 and 61074039)National Natural ScienceFund for Distinguished Young Scholar of China(No.61026016)Natural Science Foundation of Zhejiang Province(No.Y1111012)
文摘The H∞ proportional-integral-differential(PID) feedback for arbitrary-order delayed multi-agent system is investigated to improve the system performance. The closed-loop multi-input multi-output(MIMO) control framework with the distributed PID controller is firstly described for the multi-agent system in a unified way. Then, by using the matrix theory, the prescribed H∞performance criterion of the multi-agent system is shown to be equivalent to several independent H∞ performance constraints of the single-input single-output(SISO) subsystem with respect to the eigenvalues of the Laplacian matrix. Subsequently, for each subsystem,the set of the PID controllers satisfying the required H∞ performance constraint is analytically characterized based on the extended Hermite-Biehler theorem. Finally, the three-dimensional set of the decentralized H∞ PID control parameters is derived by finding the intersection of the H∞ PID regions for all the decomposed subsystems. The simulation results reveal the effectiveness of the proposed method.
基金This project was Supported by the National Natural Science Foundation of China (50335020,60574011) PostdoctoralFund (2005038553) Science Research Important Foundation in Hubei Provincial Department of Education(2002z04001).
文摘A newly designed approach of simultaneous stabilization is given for linear discrete time-delay systems. The problem of stabilization for a collection of systems is discussed initially. Adequate condition are obtained in terms of linear matrix inequalities （LMIs） which are independent of time delays such that the resultant collection of discrete time-delay systems are stable with an upper bound of the quadratic performance index. Subsequently, controllers are designed such that the resultant closed-loop discrete time-delay systems are simultaneously stabilized with the upper bound of the quadratic performance index. Finally,a numerical example is given to illustrate the design method.
文摘This paper studies the evaluation method of the performances of corporation that was set up by the Financial Ministry in 1999, and then analyzes the advantages and the problems of the method. Finally, this paper studies the theoretical method of the evaluation of the performances of corporation.
文摘Knowledge has become the most important strategic resource of firms, and the competition among firms is more based on knowledge than before. To deal with this challenge, some firms are trying to develop knowledge strategies to direct their knowledge management activities, but current strategic performance measurement systems can＇t evaluate the performance of knowledge strategies appropriately. This article develops a performance measurement system for knowledge strategies based on Balanced Scorecard, and simulates the system with an improved Data Envelopment Analysis （DEA） model.
文摘How the performance in the course of implementing the logistics network organization is, and how the benefit level is produced, are undoubtedly focuses that cooperative parties pay close attention to, and the key to the network organization, too. The research on the performance appraisement about the network organization is not only very necessary, but also very important. This paper describes the characteristics of the performance appraisement about the logistics network organization, and sets up the evaluation index through analyzing the principle of constituting the logistics network organization＇s performance index system.
文摘Restructured electric market environment allows the power wheeling transactions between the power producers and customers to meet the growing load demand. This will lead to the possible of congestion in the transmission lines. The possible contingencies of power components further worsen the scenario. This paper describes the methodology for the identification of critical transmission line by computing the real power and reactive power performance indices. It also demonstrates the importance of fuzzy logic technique used to rank the transmission lines according to the severity and demonstrated on IEEE-30 bus system.
