We theoretically study nonlinear thermoelectric transport through a topological superconductor nanowire hosting Majorana bound states(MBSs) at its two ends, a system named as Majorana nanowire(MNW). We consider that t...We theoretically study nonlinear thermoelectric transport through a topological superconductor nanowire hosting Majorana bound states(MBSs) at its two ends, a system named as Majorana nanowire(MNW). We consider that the MNW is coupled to the left and right normal metallic leads subjected to either bias voltage or temperature gradient. We focus our attention on the sign change of nonlinear Seebeck and Peltier coefficients induced by mechanisms related to the MBSs, by which the possible existence of MBSs might be proved. Our results show that for a fixed temperature difference between the two leads, the sign of the nonlinear Seebeck coefficient(thermopower) can be reversed by changing the overlap amplitude between the MBSs or the system equilibrium temperature, which are similar to the cases in linear response regime. By optimizing the MBS–MBS interaction amplitude and system equilibrium temperature, we find that the temperature difference may also induce sign change of the nonlinear thermopower. For zero temperature difference and finite bias voltage, both the sign and magnitude of nonlinear Peltier coefficient can be adjusted by changing the bias voltage or overlap amplitude between the MBSs. In the presence of both bias voltage and temperature difference, we show that the electrical current at zero Fermi level and the states induced by overlap between the MBSs keep unchanged, regardless of the amplitude of temperature difference. We also find that the direction of the heat current driven by bias voltage may be changed by weak temperature difference.展开更多
In this paper, operator-based nonlinear water temperature control for a group of three connected microreactors actuated by Peltier devices is proposed. To control the water temperature of tube in the microreactor, the...In this paper, operator-based nonlinear water temperature control for a group of three connected microreactors actuated by Peltier devices is proposed. To control the water temperature of tube in the microreactor, the temperature change of aluminum effects is considered. Therefore, the temperature change of aluminum becomes the part of an input of the tube. First, nonlinear thermal models of aluminum plates and tubes that structure the microreactor are obtained. Then, an operator based nonlinear water temperature control system for the microreactor is designed. Finally, the effectiveness of the proposed models and methods is confirmed by simulation and experimental results.展开更多
Conventional refrigeration processes release ammonia and freon into the atmosphere,which results in global warming.These problems may be overcome by using thermoelectric modules because of the absence of coolants or r...Conventional refrigeration processes release ammonia and freon into the atmosphere,which results in global warming.These problems may be overcome by using thermoelectric modules because of the absence of coolants or refrigerants in these systems.However,the cooling performances of such modules are relatively small in comparison to those of conventional refrigerators.In this paper,the working principles of thermoelectric modules are discussed together with a review of different relevant aspects,namely:the thermoelectric materials,and their mechanical properties used to build thermoelectric devices,different types of thermoelectric devices available on the market,mathematical modeling of thermoelectric materials,and various applications of thermoelectric materials in different fields.展开更多
Experimental study is performed to design and develop a cylindrical micro-pump driven by expansion and contraction of the heat deformation material, whose variation is caused with the aid of heating and cooling proper...Experimental study is performed to design and develop a cylindrical micro-pump driven by expansion and contraction of the heat deformation material, whose variation is caused with the aid of heating and cooling properties of Peltier devices. The pump consists of the diffuser valve unit, the heat deformation material unit, the nozzle valve unit, the Peltier devices and the cover. The input current of the Peltier devices is controlled by the bipolar power supply so that the Peltier devices are heated and cooled periodically. The working fluid flow in the micro-pump is caused by the periodical thermal deformation of material which is caused by the periodical heating and cooling of the Peltier devices. In order to measure the fluid flow in the micro-pump, micro air bubbles are employed as a tracer. The corresponding movement is recorded by X-ray apparatus and its velocity is measured by PIV （particle image velocimetry）. It is found that, the micro-pump developed here can make the working fluid flow. The corresponding fluid flow in the micro pump is confirmed by the numerical method.展开更多
Thermoelectric air conditioning systems based on the Peltier effect had two modes:heating and cooling.In this work,the proposed design provides continuous improvement in COP from the first minute of operation.In cooli...Thermoelectric air conditioning systems based on the Peltier effect had two modes:heating and cooling.In this work,the proposed design provides continuous improvement in COP from the first minute of operation.In cooling mode,the coefficient of performance(COP)was 1.176 due to the techniques used in this device,and it increased to 1.24 in the last minute of operation.Concerning the steady-state scenario,from the first minute,the Qc was larger than the W for the entire duration of the operation.The output temperature reaches 18.97℃ ,and the temperature on the cold side reaches 4.96℃ in the fifteen minutes of operation.The cooling mood was checked in Iraq/Baghdad in October with a temperature of 31℃ .Furthermore,the heating mode was checked in December with a temperature of 22℃ .Due to the size of the component on the cold side being small compared with the size of the component on the heat side,it reached a steady state in 13 min.This means the COP in heating mode reached 1.01 in 14 min.Furthermore,due to the presence of a thermal insulator made inside the device to separate the cold side and the hot side,the difference in temperature causes a noticeable little ascent.This is why the COP increased because it kept the degree differences low.Performance enhancements were achieved by optimizing the behavior of thermoelectric materials.The device contains 3 Peltier elements,a water-cooled system with one Peltier,a heat sink,and a fan.The design of the dehumidification system addresses the humidity issue commonly associated with thermoelectric air conditioners.In this context,the results indicate that the humidity rates had decreased and the cooling rate had increased with these innovative techniques,and thus,excellent performance can be achieved even if the Seebeck coefficient is not at its highest based on the condition of providing the Peltier elements’reliability and optimal thermal performance for various applications requiring both cooling and heating functions.The insulation plays a critical role in maintaining the efficiency of the system,reducing energy consumption,and ensuring long-term functionality.The proposed system is valuable for devices or environments that demand precise and dual thermal control with minimal energy wastage.展开更多
Based on the phenomenon of curvature-induced doping in graphene we propose a class of Peltier cooling devices, produced by geometrical effects, without gating. We show how a graphene nanorib- bon laid on an array of c...Based on the phenomenon of curvature-induced doping in graphene we propose a class of Peltier cooling devices, produced by geometrical effects, without gating. We show how a graphene nanorib- bon laid on an array of curved nano cylinders can be used to create a targeted and tunable cooling device. Using two different approaches, the Nonequilibrium Green＇s Function （NEGF） method and experimental inputs, we predict that the cooling kW/cm2, on par with the best known techniques power of such a device can approach the order of using standard superlattice structures. The structure proposed here helps pave the way toward designing graphene electronics which use geometry rather than gating to control devices.展开更多
The Seebeck coefficient is determined from silicon microchannel plates （Si MCPs） prepared by photo- assisted electrochemical etching at room temperature （25 ℃）. The coefficient of the sample with a pore size of 5...The Seebeck coefficient is determined from silicon microchannel plates （Si MCPs） prepared by photo- assisted electrochemical etching at room temperature （25 ℃）. The coefficient of the sample with a pore size of 5 × 5μm^2, spacing of 1 μm and thickness of about 150 μm is -852μV/K along the edge of the square pore. After doping with boron and phosphorus, the Seebeck coefficient diminishes to 256 μV/K and -117 μV/K along the edge of the square pore, whereas the electrical resistivity values are 7.5 × 10^-3 Ω·cm and 1.9 × 10^-3 Ω·cm, respectively. Our data imply that the Seebeck coefficient of the Si MCPs is related to the electrical resistivity and is consistent with that of bulk silicon. Based on the boron and phosphorus doped samples, a simple device is fabricated to connect the two type Si MCPs to evaluate the Peltier effect. When a proper current passes through the device, the Peltier effect is evidently observed. Based on the experimental data and the theoretical calculation, the estimated intrinsic figure of merit ZT of the unicouple device and thermal conductivity of the Si MCPs are 0.007 and 50 W/（m.K）, respectively.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.12264037)the Innovation Team of Colleges and Universities in Guangdong Province(Grant No.2021KCXTD040)+2 种基金Guangdong Province Education Department(Grant No.2023KTSCX174)the Key Laboratory of Guangdong Higher Education Institutes(Grant No.2023KSYS011)Science and Technology Bureau of Zhongshan(Grant No.2023B2035)。
文摘We theoretically study nonlinear thermoelectric transport through a topological superconductor nanowire hosting Majorana bound states(MBSs) at its two ends, a system named as Majorana nanowire(MNW). We consider that the MNW is coupled to the left and right normal metallic leads subjected to either bias voltage or temperature gradient. We focus our attention on the sign change of nonlinear Seebeck and Peltier coefficients induced by mechanisms related to the MBSs, by which the possible existence of MBSs might be proved. Our results show that for a fixed temperature difference between the two leads, the sign of the nonlinear Seebeck coefficient(thermopower) can be reversed by changing the overlap amplitude between the MBSs or the system equilibrium temperature, which are similar to the cases in linear response regime. By optimizing the MBS–MBS interaction amplitude and system equilibrium temperature, we find that the temperature difference may also induce sign change of the nonlinear thermopower. For zero temperature difference and finite bias voltage, both the sign and magnitude of nonlinear Peltier coefficient can be adjusted by changing the bias voltage or overlap amplitude between the MBSs. In the presence of both bias voltage and temperature difference, we show that the electrical current at zero Fermi level and the states induced by overlap between the MBSs keep unchanged, regardless of the amplitude of temperature difference. We also find that the direction of the heat current driven by bias voltage may be changed by weak temperature difference.
文摘In this paper, operator-based nonlinear water temperature control for a group of three connected microreactors actuated by Peltier devices is proposed. To control the water temperature of tube in the microreactor, the temperature change of aluminum effects is considered. Therefore, the temperature change of aluminum becomes the part of an input of the tube. First, nonlinear thermal models of aluminum plates and tubes that structure the microreactor are obtained. Then, an operator based nonlinear water temperature control system for the microreactor is designed. Finally, the effectiveness of the proposed models and methods is confirmed by simulation and experimental results.
文摘Conventional refrigeration processes release ammonia and freon into the atmosphere,which results in global warming.These problems may be overcome by using thermoelectric modules because of the absence of coolants or refrigerants in these systems.However,the cooling performances of such modules are relatively small in comparison to those of conventional refrigerators.In this paper,the working principles of thermoelectric modules are discussed together with a review of different relevant aspects,namely:the thermoelectric materials,and their mechanical properties used to build thermoelectric devices,different types of thermoelectric devices available on the market,mathematical modeling of thermoelectric materials,and various applications of thermoelectric materials in different fields.
文摘Experimental study is performed to design and develop a cylindrical micro-pump driven by expansion and contraction of the heat deformation material, whose variation is caused with the aid of heating and cooling properties of Peltier devices. The pump consists of the diffuser valve unit, the heat deformation material unit, the nozzle valve unit, the Peltier devices and the cover. The input current of the Peltier devices is controlled by the bipolar power supply so that the Peltier devices are heated and cooled periodically. The working fluid flow in the micro-pump is caused by the periodical thermal deformation of material which is caused by the periodical heating and cooling of the Peltier devices. In order to measure the fluid flow in the micro-pump, micro air bubbles are employed as a tracer. The corresponding movement is recorded by X-ray apparatus and its velocity is measured by PIV （particle image velocimetry）. It is found that, the micro-pump developed here can make the working fluid flow. The corresponding fluid flow in the micro pump is confirmed by the numerical method.
文摘Thermoelectric air conditioning systems based on the Peltier effect had two modes:heating and cooling.In this work,the proposed design provides continuous improvement in COP from the first minute of operation.In cooling mode,the coefficient of performance(COP)was 1.176 due to the techniques used in this device,and it increased to 1.24 in the last minute of operation.Concerning the steady-state scenario,from the first minute,the Qc was larger than the W for the entire duration of the operation.The output temperature reaches 18.97℃ ,and the temperature on the cold side reaches 4.96℃ in the fifteen minutes of operation.The cooling mood was checked in Iraq/Baghdad in October with a temperature of 31℃ .Furthermore,the heating mode was checked in December with a temperature of 22℃ .Due to the size of the component on the cold side being small compared with the size of the component on the heat side,it reached a steady state in 13 min.This means the COP in heating mode reached 1.01 in 14 min.Furthermore,due to the presence of a thermal insulator made inside the device to separate the cold side and the hot side,the difference in temperature causes a noticeable little ascent.This is why the COP increased because it kept the degree differences low.Performance enhancements were achieved by optimizing the behavior of thermoelectric materials.The device contains 3 Peltier elements,a water-cooled system with one Peltier,a heat sink,and a fan.The design of the dehumidification system addresses the humidity issue commonly associated with thermoelectric air conditioners.In this context,the results indicate that the humidity rates had decreased and the cooling rate had increased with these innovative techniques,and thus,excellent performance can be achieved even if the Seebeck coefficient is not at its highest based on the condition of providing the Peltier elements’reliability and optimal thermal performance for various applications requiring both cooling and heating functions.The insulation plays a critical role in maintaining the efficiency of the system,reducing energy consumption,and ensuring long-term functionality.The proposed system is valuable for devices or environments that demand precise and dual thermal control with minimal energy wastage.
基金It is a pleasure to thank Y. Chen, E.- A. Kim, and Y. L. Loh for conversations. W. J. Li would like to thank Vinh Quang Diep and Seokmin Hong for many useful discussions. W. J. Li, D. X. Yao, and E. W. Carlson acknowledge support from Research Corporation for Science Advancement and NSF Grant No. DMR 11-06187. W. J. Li acknowledges support from the Purdue Research Foundation. D. X. Yao aeknowledgcs support from the National Basic Research Program of China （No. 2012CB821400）, the National Natural Science Foundation of China （Grant Nos. 11074310 and 11275279）, Research Fund for the Doctoral Program of Higher Education of China （20110171110026）, and NCET-11-0547. EWC thanks Ecole Superieure de Physique et de Chimie Industrielles （ESPCI） for hospitality.
文摘Based on the phenomenon of curvature-induced doping in graphene we propose a class of Peltier cooling devices, produced by geometrical effects, without gating. We show how a graphene nanorib- bon laid on an array of curved nano cylinders can be used to create a targeted and tunable cooling device. Using two different approaches, the Nonequilibrium Green＇s Function （NEGF） method and experimental inputs, we predict that the cooling kW/cm2, on par with the best known techniques power of such a device can approach the order of using standard superlattice structures. The structure proposed here helps pave the way toward designing graphene electronics which use geometry rather than gating to control devices.
基金Project supported by the Shanghai Fundamental Key Project(No.10JC1404600)the Shanghai Natural Science Foundation(No. 11ZR1411000)+3 种基金the Innovation Program of Shanghai Municipal Education Commission(No.09ZZ46)the International Collaboration Project(No.10520704400)the National Natural Science Foundation of China(Nos.60990312,61076060,61176108)the City University of Hong Kong Strategic Research Grant(SRG)(No.7008009).
文摘The Seebeck coefficient is determined from silicon microchannel plates （Si MCPs） prepared by photo- assisted electrochemical etching at room temperature （25 ℃）. The coefficient of the sample with a pore size of 5 × 5μm^2, spacing of 1 μm and thickness of about 150 μm is -852μV/K along the edge of the square pore. After doping with boron and phosphorus, the Seebeck coefficient diminishes to 256 μV/K and -117 μV/K along the edge of the square pore, whereas the electrical resistivity values are 7.5 × 10^-3 Ω·cm and 1.9 × 10^-3 Ω·cm, respectively. Our data imply that the Seebeck coefficient of the Si MCPs is related to the electrical resistivity and is consistent with that of bulk silicon. Based on the boron and phosphorus doped samples, a simple device is fabricated to connect the two type Si MCPs to evaluate the Peltier effect. When a proper current passes through the device, the Peltier effect is evidently observed. Based on the experimental data and the theoretical calculation, the estimated intrinsic figure of merit ZT of the unicouple device and thermal conductivity of the Si MCPs are 0.007 and 50 W/（m.K）, respectively.
