To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content ...To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.展开更多
The product distributions of Fischer-Tropsch synthesis over Co/AC catalyst are investigated under different reaction conditions in an integral fixed bed reactor.It is found that the product distributions deviate from ...The product distributions of Fischer-Tropsch synthesis over Co/AC catalyst are investigated under different reaction conditions in an integral fixed bed reactor.It is found that the product distributions deviate from the ASF distribution.The deviation from ASF distribution is analyzed by taking the readsorption of alkenes and the following secondary reaction into consideration.It is noted that the contents of alcohol,alkene and alkane decline with the increasing carbon number,showing a slighter declining tendency of alkanes than those of alkenes and alcohols.It is also found that high temperature,space velocity,H2/CO in feed gas and low pressure are preferential for light hydrocarbons and alcohols while against the chain propagation.The effect of space velocity on the product distributions especially on the light products is not obvious.It is noticed that low temperature,space velocity,H2/CO and high pressure lead to high contents of alcohols;high temperature,H2/CO and low space velocity lead to high contents of alkanes.The effect of pressure on the amounts of alkanes is not significant;high space velocity and low temperature,pressure,H2/CO are preferential for alkenes.展开更多
The influence of La loading on Zr-Co/activated carbon （AC） catalysts has been studied for Fischer-Tropsch synthesis. The catalyst samples were characterized by XRD, TPR, CO-TPD, and temperature programmed CO hydroge...The influence of La loading on Zr-Co/activated carbon （AC） catalysts has been studied for Fischer-Tropsch synthesis. The catalyst samples were characterized by XRD, TPR, CO-TPD, and temperature programmed CO hydrogenation. The catalytic property was evaluated in a fixed bed reactor. The experimental results showed that CO conversion increased from 86.4% to 92.3% and the selectivity to methane decreased from 14.2% to 11.5% and C5＋ selectivity increased from 71.0% to 74.7% when low La loading （La = 0.2wt%） was added into the Zr-Co/AC catalyst. However, high loadings of La （La = 0.3-1.0 wt%） would decrease catalyst activity as well as the C5＋ selectivity and increase methane selectivity. XRD results displayed that La-modified Zr-Co/AC catalyst had little effect on the dispersion of Co catalyst. But, the results of TPR, CO-TPD, and temperature programmed CO hydrogenation techniques indicated that the extent of cobalt reduction was found to greatly influence the activity and selectivity of the catalyst. The addition of a small amount of La increased the reducibility of the Zr-Co/AC catalyst and restrained the formation of methane and improved the selectivity to long chain hydrocarbons. However, excess of La led to the decrease of the reducibility of Co catalyst thus resulted in higher methanation activity.展开更多
As a common heavy metal in the sintering flue gas,Pb can exist in the form of oxide(PbO)and lead to the decrease in the denitration catalysts activity.Ce-Mn/AC(activated carbon)and PbO-Ce-Mn/AC catalysts were prepared...As a common heavy metal in the sintering flue gas,Pb can exist in the form of oxide(PbO)and lead to the decrease in the denitration catalysts activity.Ce-Mn/AC(activated carbon)and PbO-Ce-Mn/AC catalysts were prepared by impregnation method and their selective catalytic reduction of NH_(3) with NO was studied.Results showed that selective catalytic reduction activity of Ce-Mn/AC decreased remarkably after doping PbO.And the NO conversion of Ce-Mn/AC reached 94.52% at 200℃,while the value was reduced to 65.8% after doping PbO at the same temperature.The doping of PbO decreased the total pore volume and oxygen functional groups of activated carbon,increased crystallinity of Mn oxides on the catalyst,decreased Mn^(4+) and chemisorbed oxygen content and then inhibited the“fast selective catalytic reduction”denitration reaction for Ce-Mn/AC catalysts.On this basis,the poisoning effects of lead oxide on Ce-Mn/AC catalysts for low-temperature selective catalytic reduction were revealed.展开更多
To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstru...To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstructure,the specific surface area,the pore volume,the crystal structure,and functional groups presented in the prepared Cu2O/AC catalysts were thoroughly characterized.By using scanning electron microscopy(SEM),nitrogen adsorption/desorption isotherms,Fourier-transform infrared(FTIR)spectroscopy and X-ray diffractometry(XRD),the effects of Cu2O loading and calcination temperature on Cu2O/AC catalysts were investigated at low temperature(150℃).The research shows that Cu on the Cu2O/AC catalyst is in the form of Cu2O with good crystalline performance and is spherical and uniformly dispersed on the AC surface.The loading of Cu2O increases the active sites and the specific surface area of the reaction gas contact,which is conducive to the rapid progress of the carbon monoxide selective catalytic reduction(CO-SCR)reaction.When the loading of Cu2O was 8%and the calcination temperature was 500℃,the removal rate of NOx facilitated by the Cu2O/AC catalyst reached 97.9%.These findings provide a theoretical basis for understanding the denitrification of sintering flue gas.展开更多
FeO;supported on activated carbon(AC) has been shown to be an ideal catalyst for catalytic wet peroxide oxidation(CWPO) due to its high CWPO reaction activity and stability. Although there have been some studies on th...FeO;supported on activated carbon(AC) has been shown to be an ideal catalyst for catalytic wet peroxide oxidation(CWPO) due to its high CWPO reaction activity and stability. Although there have been some studies on the mechanism of Fe/AC catalysis in CWPO, the specific contribution of each component(surface oxygen groups and FeOxon AC) inside an Fe/AC catalyst and their corresponding reaction mechanism remain unclear, and the reaction stability of CWPO catalysts has rarely been discussed. Then the optimal CWPO catalyst in our laboratory, 3%Fe/AC, was selected.(1) By removing certain components on the AC through heat treatment, its contribution to the reaction and the corresponding reaction mechanism were investigated. With the aid of temperature-programmed desorption–mass spectrometry(TPD–MS) and the CWPO reaction, the normalized catalytic contributions of components were shown to be: 37.3%(carboxylic groups), 5.3%(anhydride), 19.3%(ether/hydroxyl),-71.4%(carbonyl groups) and 100%(FeOx),respectively. DFT calculation and EPR analysis confirmed that carboxylic groups and Fe_(2)O_(3) are able to activate the H_(2)O_(2) to generate·OH.(2) The catalysts at were characterized at different reaction times(0 h, 450 h, 900 h, 1350 h, and 1800 h) by TPD–MS and M?ssbauer spectroscopy. Results suggested that the number of carboxylic goups gradually increased and the size of paramagnetic Fe_(2)O_(3) particle crystallites gradually increased as the reactions progressed. The occurrence of strong interactions between metal oxides and AC was also confirmed. Due to these effects, the strong stability of 3%Fe/AC was further improved. Therefore, the reasons for the high activity and strong stability of 3%Fe/AC in CWPO were clearly shown. We believe that this work provides an idea of the removal of cresols from wastewater into the introduction to show the potential applications of CWPO.展开更多
To study the modification mechanism of activated carbon(AC)by Fe and the low-temperature NH_(3)-selective catalytic reduction(SCR)denitration mechanism of Fe/AC catalysts,Fe/AC catalysts were prepared using coconut sh...To study the modification mechanism of activated carbon(AC)by Fe and the low-temperature NH_(3)-selective catalytic reduction(SCR)denitration mechanism of Fe/AC catalysts,Fe/AC catalysts were prepared using coconut shell AC activated by nitric acid as the support and iron oxide as the active component.The crystal structure,surface morphology,pore structure,functional groups and valence states of the active components of Fe/AC catalysts were characterised by X-ray diffraction,scanning electron microscopy,nitrogen adsorption and desorption,Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy,respectively.The effect of Fe loading and calcination temperature on the low-temperature denitration of NH_(3)-SCR over Fe/AC catalysts was studied using NH_(3)as the reducing gas at low temperature(150℃).The results show that the iron oxide on the Fe/AC catalyst is spherical and uniformly dispersed on the surface of AC,thereby improving the crystallisation performance and increasing the number of active sites and specific surface area on AC in contact with the reaction gas.Hence,a rapid NH_(3)-SCR reaction was realised.When the roasting temperature remains constant,the iron oxide crystals formed by increasing the amount of loading can enter the AC pore structure and accumulate to form more micropores.When the roasting temperature is raised from 400 to 500℃,the iron oxide is mainly transformed fromα-Fe_(2)O_(3)toγ-Fe_(2)O_(3),which improves the iron oxide dispersion and increases its denitration active site,allowing gas adsorption.When the Fe loading amount is 10%,and the roasting temperature is 500℃,the NO removal rate of the Fe/AC catalyst can reach 95%.According to the study,the low-temperature NH_(3)-SCR mechanism of Fe/AC catalyst is proposed,in which the redox reaction between Fe~(2+)and Fe~(3+)will facilitate the formation of reactive oxygen vacancies,which increases the amount of oxygen adsorption on the surface,especially the increase in surface acid sites,and promotes and adsorbs more reaction gases(NH_(3),O_(2),NO).The transformation from the standard SCR reaction to the fast SCR reaction is accelerated.展开更多
Activated carbon （AC） supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation （PROX） in excess H2 was evaluated. Ag/AC cataly...Activated carbon （AC） supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation （PROX） in excess H2 was evaluated. Ag/AC catalysts, after reduction in H2 at low temperatures （≤200 ℃） following heat treatment in He at 200 ℃ （He200H200）, exhibited the best catalytic properties. Temperature-programmed desorption （TPD）, X-ray diffraction （XRD） and temperature-programmed reduction （TPR） results indicated that silver oxides were produced during heat treatment in He at 200 ℃ which were reduced to metal silver nanoparticles in H2 at low temperatures （≤200 ℃）, simultaneously generating the adsorbed water/OH. CO conversion was enhanced 40% after water treatment following heat treatment in He at 600 ℃. These results imply that the metal silver nanoparticles are the active species and the adsorbed water/OH has noticeable promotion effects on CO oxidation. However, the promotion effect is still limited compared to gold catalysts under the similar conditions, which may be the reason of low selectivity to CO oxidation in PROX over silver catalysts. The reported Ag/AC-S-He catalyst after He200H200 treatment displayed similar PROX of CO reaction properties to Ag/SiO2. This means that Ag/AC catalyst is also an efficient low-temperature CO oxidation catalyst.展开更多
It is already well known that availability of petroleum oil, as a world energy source, is running low. Much work has been done by experts to produce renewable energy, especially using vegetable oil as a raw material. ...It is already well known that availability of petroleum oil, as a world energy source, is running low. Much work has been done by experts to produce renewable energy, especially using vegetable oil as a raw material. Accordingly, this paper presents preparation and activity test of Cu catalyst using coconut shell activated carbon （AC） as a support, for conversion of n-pentanol and n-butanol to their alkenes as the first step of conversion of ethanol to biogasoline. This conversion is interesting due to any agriculture product containing sugar or starch can be converted to ethanol. Activated carbon was used as a catalyst support because this material is inert; hence, it would not yield unexpected side product, and pollution of environment with the used catalyst can be prevented because the used catalytic metal can easily be recovered. Results of the work showed that coconut shell carbon contained some metals, which disturbed in preparation catalyst by cation exchange process. Washing the carbon with ammonium acetate or HCI solution could reduce the metals content more compared to using water, with optimum concentration for ammonium acetate solution was 1.25 M. Application of Cu/AC in converting n-pentanol and n-butanol, based on qualitative analysis to the products using GLC, GC-MS, and FTIR, when n-pentanol and nitrogen gas were flowed into a reactor filled with Cu/AC catalyst, it could be converted to n-pentene with 200 ℃ as the optimal temperature. While when n-butanol and nitrogen gas were flowed into a reactor filled with more Cu/AC catalyst, the product was supposed to contain its aldehyde and butyl vinyl ether.展开更多
The Cu-Fe/AC catalyst was prepared by microwave-assisted synthesis, and its morphological characteristics were characterized. The degradation effect of phenol wastewater by catalytic wet peroxide oxidation(CWPO) was s...The Cu-Fe/AC catalyst was prepared by microwave-assisted synthesis, and its morphological characteristics were characterized. The degradation effect of phenol wastewater by catalytic wet peroxide oxidation(CWPO) was studied, and the response surface methodology(RSM) was used to analyze the influencing factors of the removal rate of COD. The experimental results showed that under the conditions of reaction temperature 80 ℃, reaction time 90 min, initial pH 3.1 and H_(2)O_(2)addition 2.2 g/L, the removal rate of COD reached 82%. The results of response surface methodology indicated that under the conditions of reaction temperature 100 ℃, reaction time 64 min, initial pH 3.3 and H_(2)O_(2)addition 2.7 g/L, the removal rate of COD was up to 86%. After Cu-Fe/AC catalyst was reused for 4 times, the removal rate of COD was still above 80%, revealing that the catalyst showed good catalytic performance.展开更多
Catalytic reduction of nitrate over bimetallic catalysts has emerged as a technology for sustainable treatment of nitrate-containing groundwater.However,the structure of bimetallic has been much less investigated for ...Catalytic reduction of nitrate over bimetallic catalysts has emerged as a technology for sustainable treatment of nitrate-containing groundwater.However,the structure of bimetallic has been much less investigated for catalyst optimization.Herein,two main types of Pd-Cu bimetallic nanocrystal structures,heterostructure and intermetallic,were prepared and characterized using high-resolution transmission electron microscopy(HRTEM),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The results show that two individual Pd and Cu nanocrystals with a mixed interface exist in the heterostructure nanocrystals,while Pd and Cu atoms are uniformly distributed across the intermetallic Pd-Cu nanocrystals.The catalytic nitrate reduction experiments were carried out in a semibatch reactor under constant hydrogen flow.The nitrate conversion rate of the heterostructure Pd-Cu nanocrystals supported onα-Al_(2)O_(3),γ-Al_(2)O_(3),SBA-15,and XC-72R exhibited 3.82-,6.76-,4.28-,2.44-fold enhancements relative to the intermetallic nanocrystals,and the nitrogen and nitrite were the main products for the heterostructure and intermetallic Pd-Cu nanocrystals,respectively.This indicates that the catalytic nitrate reduction over Pd-Cu catalyst is sensitive to the bimetallic structures of the catalysts,and heterostructure bimetallic nanocrystals exhibit better catalytic performances on both the activity and selectivity,which may provide new insights into the design and optimization of catalysts to improve catalytic activity and selectivity for nitrate reduction in water.展开更多
基金Supported by the Science and Technology Cooperation and Exchange special project of Cooperation of Shanxi Province(202404041101014)the Fundamental Research Program of Shanxi Province(202403021212333)+3 种基金the Joint Funds of the National Natural Science Foundation of China(U24A20555)the Lvliang Key R&D of University-Local Cooperation(2023XDHZ10)the Initiation Fund for Doctoral Research of Taiyuan University of Science and Technology(20242026)the Outstanding Doctor Funding Award of Shanxi Province(20242080).
文摘To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.
基金supported by the National High Technology Research and Development Plan of China(863 plan)(Project No.2006AA05A111)
文摘The product distributions of Fischer-Tropsch synthesis over Co/AC catalyst are investigated under different reaction conditions in an integral fixed bed reactor.It is found that the product distributions deviate from the ASF distribution.The deviation from ASF distribution is analyzed by taking the readsorption of alkenes and the following secondary reaction into consideration.It is noted that the contents of alcohol,alkene and alkane decline with the increasing carbon number,showing a slighter declining tendency of alkanes than those of alkenes and alcohols.It is also found that high temperature,space velocity,H2/CO in feed gas and low pressure are preferential for light hydrocarbons and alcohols while against the chain propagation.The effect of space velocity on the product distributions especially on the light products is not obvious.It is noticed that low temperature,space velocity,H2/CO and high pressure lead to high contents of alcohols;high temperature,H2/CO and low space velocity lead to high contents of alkanes.The effect of pressure on the amounts of alkanes is not significant;high space velocity and low temperature,pressure,H2/CO are preferential for alkenes.
基金National Key Fundamental Research Development Plan ("973"Plan,No.2005CB221400)
文摘The influence of La loading on Zr-Co/activated carbon （AC） catalysts has been studied for Fischer-Tropsch synthesis. The catalyst samples were characterized by XRD, TPR, CO-TPD, and temperature programmed CO hydrogenation. The catalytic property was evaluated in a fixed bed reactor. The experimental results showed that CO conversion increased from 86.4% to 92.3% and the selectivity to methane decreased from 14.2% to 11.5% and C5＋ selectivity increased from 71.0% to 74.7% when low La loading （La = 0.2wt%） was added into the Zr-Co/AC catalyst. However, high loadings of La （La = 0.3-1.0 wt%） would decrease catalyst activity as well as the C5＋ selectivity and increase methane selectivity. XRD results displayed that La-modified Zr-Co/AC catalyst had little effect on the dispersion of Co catalyst. But, the results of TPR, CO-TPD, and temperature programmed CO hydrogenation techniques indicated that the extent of cobalt reduction was found to greatly influence the activity and selectivity of the catalyst. The addition of a small amount of La increased the reducibility of the Zr-Co/AC catalyst and restrained the formation of methane and improved the selectivity to long chain hydrocarbons. However, excess of La led to the decrease of the reducibility of Co catalyst thus resulted in higher methanation activity.
基金the National Natural Science Foundation of China(Nos.51874058 and 51604048)Fund of Chongqing Science and Technology(cstc2019jscxmsxmX0215)for financial support.
文摘As a common heavy metal in the sintering flue gas,Pb can exist in the form of oxide(PbO)and lead to the decrease in the denitration catalysts activity.Ce-Mn/AC(activated carbon)and PbO-Ce-Mn/AC catalysts were prepared by impregnation method and their selective catalytic reduction of NH_(3) with NO was studied.Results showed that selective catalytic reduction activity of Ce-Mn/AC decreased remarkably after doping PbO.And the NO conversion of Ce-Mn/AC reached 94.52% at 200℃,while the value was reduced to 65.8% after doping PbO at the same temperature.The doping of PbO decreased the total pore volume and oxygen functional groups of activated carbon,increased crystallinity of Mn oxides on the catalyst,decreased Mn^(4+) and chemisorbed oxygen content and then inhibited the“fast selective catalytic reduction”denitration reaction for Ce-Mn/AC catalysts.On this basis,the poisoning effects of lead oxide on Ce-Mn/AC catalysts for low-temperature selective catalytic reduction were revealed.
基金Open Fund of Key Laboratory of Ministry of Education for Metallurgical Emission Reduction and Comprehensive Utilization of Resources,China(No.JKF19-08)General Project of Science and Technology Plan of Yunnan Science and Technology Department,China(No.2019FB077)+1 种基金Industrialization Cultivation Project of Scientific Research Fund of Yunnan Provincial Department of Education,China(No.2016CYH07)Top Young Talents of Yunnan Ten Thousand Talents Plan,China(No.YNWR-QNBJ-2019-263)。
文摘To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstructure,the specific surface area,the pore volume,the crystal structure,and functional groups presented in the prepared Cu2O/AC catalysts were thoroughly characterized.By using scanning electron microscopy(SEM),nitrogen adsorption/desorption isotherms,Fourier-transform infrared(FTIR)spectroscopy and X-ray diffractometry(XRD),the effects of Cu2O loading and calcination temperature on Cu2O/AC catalysts were investigated at low temperature(150℃).The research shows that Cu on the Cu2O/AC catalyst is in the form of Cu2O with good crystalline performance and is spherical and uniformly dispersed on the AC surface.The loading of Cu2O increases the active sites and the specific surface area of the reaction gas contact,which is conducive to the rapid progress of the carbon monoxide selective catalytic reduction(CO-SCR)reaction.When the loading of Cu2O was 8%and the calcination temperature was 500℃,the removal rate of NOx facilitated by the Cu2O/AC catalyst reached 97.9%.These findings provide a theoretical basis for understanding the denitrification of sintering flue gas.
基金funded by the National Natural Science Foundation of China (52100072)the Beijing Natural Science Foundation(8214056)+2 种基金the special fund of Beijing Key Laboratory of Clean Fuels and Efficient Catalytic Emission Reduction Technology,the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA21021101)the National Key Research and Development Program of China (2019YFA0705803)Scientific Research Common Program of Beijing Municipal Commission of Education(KM202010017006)。
文摘FeO;supported on activated carbon(AC) has been shown to be an ideal catalyst for catalytic wet peroxide oxidation(CWPO) due to its high CWPO reaction activity and stability. Although there have been some studies on the mechanism of Fe/AC catalysis in CWPO, the specific contribution of each component(surface oxygen groups and FeOxon AC) inside an Fe/AC catalyst and their corresponding reaction mechanism remain unclear, and the reaction stability of CWPO catalysts has rarely been discussed. Then the optimal CWPO catalyst in our laboratory, 3%Fe/AC, was selected.(1) By removing certain components on the AC through heat treatment, its contribution to the reaction and the corresponding reaction mechanism were investigated. With the aid of temperature-programmed desorption–mass spectrometry(TPD–MS) and the CWPO reaction, the normalized catalytic contributions of components were shown to be: 37.3%(carboxylic groups), 5.3%(anhydride), 19.3%(ether/hydroxyl),-71.4%(carbonyl groups) and 100%(FeOx),respectively. DFT calculation and EPR analysis confirmed that carboxylic groups and Fe_(2)O_(3) are able to activate the H_(2)O_(2) to generate·OH.(2) The catalysts at were characterized at different reaction times(0 h, 450 h, 900 h, 1350 h, and 1800 h) by TPD–MS and M?ssbauer spectroscopy. Results suggested that the number of carboxylic goups gradually increased and the size of paramagnetic Fe_(2)O_(3) particle crystallites gradually increased as the reactions progressed. The occurrence of strong interactions between metal oxides and AC was also confirmed. Due to these effects, the strong stability of 3%Fe/AC was further improved. Therefore, the reasons for the high activity and strong stability of 3%Fe/AC in CWPO were clearly shown. We believe that this work provides an idea of the removal of cresols from wastewater into the introduction to show the potential applications of CWPO.
基金Funded by the General Project of Science and Technology Plan of Yunnan Science and Technology Department(Nos.202001AT070029,2019FB077)Open Fund of Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education(No.FMRUlab-20-4)。
文摘To study the modification mechanism of activated carbon(AC)by Fe and the low-temperature NH_(3)-selective catalytic reduction(SCR)denitration mechanism of Fe/AC catalysts,Fe/AC catalysts were prepared using coconut shell AC activated by nitric acid as the support and iron oxide as the active component.The crystal structure,surface morphology,pore structure,functional groups and valence states of the active components of Fe/AC catalysts were characterised by X-ray diffraction,scanning electron microscopy,nitrogen adsorption and desorption,Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy,respectively.The effect of Fe loading and calcination temperature on the low-temperature denitration of NH_(3)-SCR over Fe/AC catalysts was studied using NH_(3)as the reducing gas at low temperature(150℃).The results show that the iron oxide on the Fe/AC catalyst is spherical and uniformly dispersed on the surface of AC,thereby improving the crystallisation performance and increasing the number of active sites and specific surface area on AC in contact with the reaction gas.Hence,a rapid NH_(3)-SCR reaction was realised.When the roasting temperature remains constant,the iron oxide crystals formed by increasing the amount of loading can enter the AC pore structure and accumulate to form more micropores.When the roasting temperature is raised from 400 to 500℃,the iron oxide is mainly transformed fromα-Fe_(2)O_(3)toγ-Fe_(2)O_(3),which improves the iron oxide dispersion and increases its denitration active site,allowing gas adsorption.When the Fe loading amount is 10%,and the roasting temperature is 500℃,the NO removal rate of the Fe/AC catalyst can reach 95%.According to the study,the low-temperature NH_(3)-SCR mechanism of Fe/AC catalyst is proposed,in which the redox reaction between Fe~(2+)and Fe~(3+)will facilitate the formation of reactive oxygen vacancies,which increases the amount of oxygen adsorption on the surface,especially the increase in surface acid sites,and promotes and adsorbs more reaction gases(NH_(3),O_(2),NO).The transformation from the standard SCR reaction to the fast SCR reaction is accelerated.
基金supported by the National Natural Science Foundation of China (No. 21207039)the Natural Science Foundation of Guangdong Province, China (Grant No. S2011010000737)+2 种基金the Doctoral Fund of Ministry of Education of China (20110172120017)the Fundamental Research Funds for the Central Universities (Grant No. 2011zm 0048)the Key Laboratory of Renewable Energy and Gas Hydrate, Chinese Academy of Sciences (No. Y007K1)
文摘Activated carbon （AC） supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation （PROX） in excess H2 was evaluated. Ag/AC catalysts, after reduction in H2 at low temperatures （≤200 ℃） following heat treatment in He at 200 ℃ （He200H200）, exhibited the best catalytic properties. Temperature-programmed desorption （TPD）, X-ray diffraction （XRD） and temperature-programmed reduction （TPR） results indicated that silver oxides were produced during heat treatment in He at 200 ℃ which were reduced to metal silver nanoparticles in H2 at low temperatures （≤200 ℃）, simultaneously generating the adsorbed water/OH. CO conversion was enhanced 40% after water treatment following heat treatment in He at 600 ℃. These results imply that the metal silver nanoparticles are the active species and the adsorbed water/OH has noticeable promotion effects on CO oxidation. However, the promotion effect is still limited compared to gold catalysts under the similar conditions, which may be the reason of low selectivity to CO oxidation in PROX over silver catalysts. The reported Ag/AC-S-He catalyst after He200H200 treatment displayed similar PROX of CO reaction properties to Ag/SiO2. This means that Ag/AC catalyst is also an efficient low-temperature CO oxidation catalyst.
文摘It is already well known that availability of petroleum oil, as a world energy source, is running low. Much work has been done by experts to produce renewable energy, especially using vegetable oil as a raw material. Accordingly, this paper presents preparation and activity test of Cu catalyst using coconut shell activated carbon （AC） as a support, for conversion of n-pentanol and n-butanol to their alkenes as the first step of conversion of ethanol to biogasoline. This conversion is interesting due to any agriculture product containing sugar or starch can be converted to ethanol. Activated carbon was used as a catalyst support because this material is inert; hence, it would not yield unexpected side product, and pollution of environment with the used catalyst can be prevented because the used catalytic metal can easily be recovered. Results of the work showed that coconut shell carbon contained some metals, which disturbed in preparation catalyst by cation exchange process. Washing the carbon with ammonium acetate or HCI solution could reduce the metals content more compared to using water, with optimum concentration for ammonium acetate solution was 1.25 M. Application of Cu/AC in converting n-pentanol and n-butanol, based on qualitative analysis to the products using GLC, GC-MS, and FTIR, when n-pentanol and nitrogen gas were flowed into a reactor filled with Cu/AC catalyst, it could be converted to n-pentene with 200 ℃ as the optimal temperature. While when n-butanol and nitrogen gas were flowed into a reactor filled with more Cu/AC catalyst, the product was supposed to contain its aldehyde and butyl vinyl ether.
文摘The Cu-Fe/AC catalyst was prepared by microwave-assisted synthesis, and its morphological characteristics were characterized. The degradation effect of phenol wastewater by catalytic wet peroxide oxidation(CWPO) was studied, and the response surface methodology(RSM) was used to analyze the influencing factors of the removal rate of COD. The experimental results showed that under the conditions of reaction temperature 80 ℃, reaction time 90 min, initial pH 3.1 and H_(2)O_(2)addition 2.2 g/L, the removal rate of COD reached 82%. The results of response surface methodology indicated that under the conditions of reaction temperature 100 ℃, reaction time 64 min, initial pH 3.3 and H_(2)O_(2)addition 2.7 g/L, the removal rate of COD was up to 86%. After Cu-Fe/AC catalyst was reused for 4 times, the removal rate of COD was still above 80%, revealing that the catalyst showed good catalytic performance.
基金support from the National Natural Science Foundation of China(Nos.52370100,52000146,and 51978098)China Postdoctoral Science Foundation(No.2020M673351).
文摘Catalytic reduction of nitrate over bimetallic catalysts has emerged as a technology for sustainable treatment of nitrate-containing groundwater.However,the structure of bimetallic has been much less investigated for catalyst optimization.Herein,two main types of Pd-Cu bimetallic nanocrystal structures,heterostructure and intermetallic,were prepared and characterized using high-resolution transmission electron microscopy(HRTEM),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The results show that two individual Pd and Cu nanocrystals with a mixed interface exist in the heterostructure nanocrystals,while Pd and Cu atoms are uniformly distributed across the intermetallic Pd-Cu nanocrystals.The catalytic nitrate reduction experiments were carried out in a semibatch reactor under constant hydrogen flow.The nitrate conversion rate of the heterostructure Pd-Cu nanocrystals supported onα-Al_(2)O_(3),γ-Al_(2)O_(3),SBA-15,and XC-72R exhibited 3.82-,6.76-,4.28-,2.44-fold enhancements relative to the intermetallic nanocrystals,and the nitrogen and nitrite were the main products for the heterostructure and intermetallic Pd-Cu nanocrystals,respectively.This indicates that the catalytic nitrate reduction over Pd-Cu catalyst is sensitive to the bimetallic structures of the catalysts,and heterostructure bimetallic nanocrystals exhibit better catalytic performances on both the activity and selectivity,which may provide new insights into the design and optimization of catalysts to improve catalytic activity and selectivity for nitrate reduction in water.
