期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Synthesis,characterization and gas-sensing properties of Pd-doped SnO_2 nano particles 被引量:1
1
作者 谭瑞琴 郭艳群 +3 位作者 赵俊华 李月 徐铁峰 宋伟杰 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2011年第7期1568-1573,共6页
SnO2 nano particles with various Pd-doping concentrations were prepared using a template-free hydrothermal method.The effects of Pd doping on the crystal structure,morphology,microstructure,thermal stability and surfa... SnO2 nano particles with various Pd-doping concentrations were prepared using a template-free hydrothermal method.The effects of Pd doping on the crystal structure,morphology,microstructure,thermal stability and surface chemistry of these nano particles were characterized by transmission electron microscope,X-ray diffractometer and X-ray photoelectron spectroscope respectively.It was observed that Pd-doping had little effect on the grain sizes of the obtained SnO2 nano particles during the hydrothermal route.During thermal annealing,Pd-doping could restrain the growth of grain sizes below 500℃ while the grain growth was promoted when the temperature increased to above 700℃.XPS results revealed that Pd existed in three chemical states in the as-synthesized sample as Pd^0,Pd^2+ and Pd^4+,respectively.Pd^4+ was the main state which was responsible for improving the gas-sensing property.The optimal Pd-doping concentration for better gas-sensing property and thermal stability was 2.0%-2.5% (mole fraction). 展开更多
关键词 sno2 nano particles pd-doping hydrothermal synthesis gas sensing property X-ray photoelectron spectroscopy
在线阅读 下载PDF
温湿度对SnO_2基CO气体传感器敏感特性的影响 被引量:6
2
作者 薛严冰 唐祯安 《传感技术学报》 CAS CSCD 北大核心 2011年第6期793-798,共6页
采用溶胶-凝胶法制备了纳米SnO2粉体及Pd掺杂浓度比分别为0.2 mol%、2 mol%1、0 mol%的三种掺杂粉体。以制得的粉体作为敏感材料,制成陶瓷微热板式CO气体传感器。在自行搭建的气体测试平台上,测试了各传感器在不同环境温湿度条件下对CO... 采用溶胶-凝胶法制备了纳米SnO2粉体及Pd掺杂浓度比分别为0.2 mol%、2 mol%1、0 mol%的三种掺杂粉体。以制得的粉体作为敏感材料,制成陶瓷微热板式CO气体传感器。在自行搭建的气体测试平台上,测试了各传感器在不同环境温湿度条件下对CO的响应,研究了Pd掺杂浓度对传感器湿度稳定性的影响,探讨了湿度影响传感器灵敏度的机理。实验结果表明:0.2 mol%Pd掺杂器件在不同湿度条件下灵敏度离散度由掺杂前的20.5%降低至8.63%,有效提高了传感器的湿度稳定性。10 mol%Pd掺杂器件在湿度大于50%相对湿度时,对20×10-6 CO出现反常响应,在还原气体CO出现时气敏膜电导减小。 展开更多
关键词 CO气体传感器 环境温湿度 气敏特性 pd掺杂sno2 掺杂浓度
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部