期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Preparation of TiO_2 Nanoparticles Coated Cotton Fibers at Low Temperature and Their Photocatalytic Activity
1
作者 石中亮 卢昌岁 +2 位作者 王海波 潘永娥 姚淑华 《过程工程学报》 CAS CSCD 北大核心 2010年第4期809-814,共6页
TiO_2 nanoparticles coated cotton fiber composite was successfully prepared by using a sol-gel method at low temperature(about 100℃) using tetrabutyl-titanate [Ti(OBu)_4] as raw material.The preparation of the TiO_2 ... TiO_2 nanoparticles coated cotton fiber composite was successfully prepared by using a sol-gel method at low temperature(about 100℃) using tetrabutyl-titanate [Ti(OBu)_4] as raw material.The preparation of the TiO_2 colloid and the composite were described.The properties of resulting materials were characterized by SEM and XRD,the photocatalytic degradation performance was tested using methylene blue(MB) as the target pollutant in aqueous solution.The results showed that the amorphous TiO_2 nanoparticles were distributed evenly on the outer surfaces of cotton fibers,which shows efficient photocatalytic properties when exposed to UV light,the degradation rate of MB reached 95.35% under the conditions of catalyst dosage 2.5 g/L,MB concentration 50 mg/L,irradiation time 120 min,and pH 10,and the photocatalytic activity of TiO_2/cotton fibers remained above 90% of its activity as-prepared after being used four times,the degradation rate of MB could reach 88.78% when irradiation time was 120 min.The photocatalytic degradation of MB could be properly described by the first-order kinetic law.By comparison of the removal rates of MB with and without UV light,it could be affirmed that the disappearance of MB was due to photodegradation rather than adsorption on cotton fibers. 展开更多
关键词 tio2 nanoparticles cotton fibers PHOTOCATALYSIS methylene blue
在线阅读 下载PDF
Pd/TiO_2/棉花纤维复合催化材料的制备与性能研究 被引量:2
2
作者 汪杰 肖龙亚 +1 位作者 聂龙辉 余家国 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2019年第1期341-347,共7页
先通过浸渍-提拉法将纳米TiO_2对棉花纤维表面进行修饰,再通过浸渍-NaBH4还原法将Pd纳米颗粒沉积在TiO_2/棉花纤维(TC)表面,制备得到Pd/TiO_2/棉花纤维复合催化材料(PTC)。所制备的复合催化材料用于室温氧化分解甲醛,研究了Pd负载量对... 先通过浸渍-提拉法将纳米TiO_2对棉花纤维表面进行修饰,再通过浸渍-NaBH4还原法将Pd纳米颗粒沉积在TiO_2/棉花纤维(TC)表面,制备得到Pd/TiO_2/棉花纤维复合催化材料(PTC)。所制备的复合催化材料用于室温氧化分解甲醛,研究了Pd负载量对催化性能的影响。结果表明,PTC催化材料具有远低于粉末状样品的气阻,此特点对催化材料的实际应用具有非常大的优势;该催化材料能有效室温分解甲醛成CO_2和H_2O。PTC催化材料的催化活性随Pd含量(0.25%~1.0%,质量分数)的增加而增加。鉴于PTC催化材料具有低气阻、轻质、使用灵活的属性和良好催化效率以及载体棉花原料来源广泛、成本低等优点,具有良好的实际应用于室内空气净化和相关催化过程的潜力。 展开更多
关键词 多相催化 甲醛氧化 pd/tio2/棉花纤维
原文传递
纳米TiO_2/丝素复合膜整理对织物上染率的影响 被引量:2
3
作者 夏友谊 陈建勇 《印染》 北大核心 2004年第15期4-6,共3页
将粘胶织物和棉织物作为被整理材料 ,研究经纳米TiO2 /丝素复合膜整理前后织物上染率的变化 ,并借助于AFM (原子力显微镜 )观察被整理后织物表面的形状结构。试验结果表明 ,经复合膜整理后 ,织物表面的纳米TiO2 分散均匀、粒径较小 。
关键词 整理 丝朊 二氧化钛 纳米技术 上染率 织物 粘胶纤维 棉纤维
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部