Pd/Ag/α-Al2O3 composite membranes were prepared by sequential electroless plating technique. The prepared membranes were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy disper...Pd/Ag/α-Al2O3 composite membranes were prepared by sequential electroless plating technique. The prepared membranes were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy, and inductively coupled plasma atomic emission spectroscopy techniques （ICP-AES）. Effects of annealing time, Ag content, and air treatment on the hydrogen permeation flux and morphology of the alloys were investigated. The results of the investigation showed that the prepared type of tube had a good potential as substrate for membrane preparation. In addition, a uniform defect-free alloy was prepared by annealing at 550 ℃ in H2 atmosphere. The permeation results showed an increase in H2 permeation flux by increasing the Ag content and the annealing time. In addition, the air treatment of the prepared membranes at 400 ℃ for 1 h changed the morphology of the alloy and substantially enhanced the hydrogen flux.展开更多
The binary mixture of Yb2O3-La2O3 was used as an additive to improve the traditional electroless plating for Pd-Ag co-deposition on the inside surface of a porous ceramic tube. The main attention were paid to investig...The binary mixture of Yb2O3-La2O3 was used as an additive to improve the traditional electroless plating for Pd-Ag co-deposition on the inside surface of a porous ceramic tube. The main attention were paid to investigating the effects of Yb2O3-La2O3 on Pd-Ag co-deposition rate, plating temperature, Ag content in film and Pd/Ag reduction potentials. The experimental results show that the co-deposition rate is increased by 63 % , the plating temperature is decreased by 10 ~ 20℃for obtaining the same co-deposition rate and the Ag content in film basically remains unchangeable when Yb2O3-La2O3 is added into the traditional electroless plating solution. The experiment also shows that Pd/Ag reduction potentials basically remain unchangeable with the binary rare earths based on the electrochemical mathematical models An inorganic composite membrane with alloy film of 76.8(mol)% Pd-23.2(mol) % Ag and the thickness of 7.7μm on the porous ceramic tube was prepared and the permeation fluxes of hydrogen and nitrogen through the membrane are 8.65×10-3 and 1.92×10-6m3·m-2·s-1 at 350℃and 0.3 MPa respectively.展开更多
对Pd-Ag/Al2O3催化剂在裂解混合碳四选择加氢制丁烯反应中的性能进行了研究。实验结果表明,1,3-丁二烯加氢生成1-丁烯的选择性与反应器入口1,3-丁二烯浓度和氢/丁二烯比密切相关,在反应器入口温度40℃、反应压力1.0 MPa、液空速40 h 1...对Pd-Ag/Al2O3催化剂在裂解混合碳四选择加氢制丁烯反应中的性能进行了研究。实验结果表明,1,3-丁二烯加氢生成1-丁烯的选择性与反应器入口1,3-丁二烯浓度和氢/丁二烯比密切相关,在反应器入口温度40℃、反应压力1.0 MPa、液空速40 h 1的条件下,当入口丁二烯摩尔分数大于2.6%,1-丁烯选择性维持在66%以上;当入口丁二烯摩尔分数降至2.6%以下时,1-丁烯选择性开始下降;当反应器入口1,3-丁二烯摩尔分数小于1.0%时,出口1,3-丁二烯摩尔分数可降至小于1.0×10-5。当反应器入口1,3-丁二烯摩尔分数为0.50%～0.85%时,1-丁烯选择性随着氢/丁二烯摩尔比的增加呈现线性下降趋势,表明过量的氢气是发生丁烯的异构化和加氢反应的重要原因。H2-TPR和XPS表征结果显示,Pd-Ag/Al2O3中的Pd和Ag还原过程中形成了Pd-Ag合金。展开更多
文摘Pd/Ag/α-Al2O3 composite membranes were prepared by sequential electroless plating technique. The prepared membranes were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy, and inductively coupled plasma atomic emission spectroscopy techniques （ICP-AES）. Effects of annealing time, Ag content, and air treatment on the hydrogen permeation flux and morphology of the alloys were investigated. The results of the investigation showed that the prepared type of tube had a good potential as substrate for membrane preparation. In addition, a uniform defect-free alloy was prepared by annealing at 550 ℃ in H2 atmosphere. The permeation results showed an increase in H2 permeation flux by increasing the Ag content and the annealing time. In addition, the air treatment of the prepared membranes at 400 ℃ for 1 h changed the morphology of the alloy and substantially enhanced the hydrogen flux.
基金Project supported by Science and Technology Committee of Jiangxi Province
文摘The binary mixture of Yb2O3-La2O3 was used as an additive to improve the traditional electroless plating for Pd-Ag co-deposition on the inside surface of a porous ceramic tube. The main attention were paid to investigating the effects of Yb2O3-La2O3 on Pd-Ag co-deposition rate, plating temperature, Ag content in film and Pd/Ag reduction potentials. The experimental results show that the co-deposition rate is increased by 63 % , the plating temperature is decreased by 10 ~ 20℃for obtaining the same co-deposition rate and the Ag content in film basically remains unchangeable when Yb2O3-La2O3 is added into the traditional electroless plating solution. The experiment also shows that Pd/Ag reduction potentials basically remain unchangeable with the binary rare earths based on the electrochemical mathematical models An inorganic composite membrane with alloy film of 76.8(mol)% Pd-23.2(mol) % Ag and the thickness of 7.7μm on the porous ceramic tube was prepared and the permeation fluxes of hydrogen and nitrogen through the membrane are 8.65×10-3 and 1.92×10-6m3·m-2·s-1 at 350℃and 0.3 MPa respectively.
文摘对Pd-Ag/Al2O3催化剂在裂解混合碳四选择加氢制丁烯反应中的性能进行了研究。实验结果表明,1,3-丁二烯加氢生成1-丁烯的选择性与反应器入口1,3-丁二烯浓度和氢/丁二烯比密切相关,在反应器入口温度40℃、反应压力1.0 MPa、液空速40 h 1的条件下,当入口丁二烯摩尔分数大于2.6%,1-丁烯选择性维持在66%以上;当入口丁二烯摩尔分数降至2.6%以下时,1-丁烯选择性开始下降;当反应器入口1,3-丁二烯摩尔分数小于1.0%时,出口1,3-丁二烯摩尔分数可降至小于1.0×10-5。当反应器入口1,3-丁二烯摩尔分数为0.50%～0.85%时,1-丁烯选择性随着氢/丁二烯摩尔比的增加呈现线性下降趋势,表明过量的氢气是发生丁烯的异构化和加氢反应的重要原因。H2-TPR和XPS表征结果显示,Pd-Ag/Al2O3中的Pd和Ag还原过程中形成了Pd-Ag合金。
