Passive source imaging can reconstruct body wave reflections similar to those of active sources through seismic interferometry(SI).It has become a low-cost,environmentally friendly alternative to active source seismic...Passive source imaging can reconstruct body wave reflections similar to those of active sources through seismic interferometry(SI).It has become a low-cost,environmentally friendly alternative to active source seismic,showing great potential.However,this method faces many challenges in practical applications,including uneven distribution of underground sources and complex survey environments.These situations seriously affect the reconstruction quality of virtual shot records,resulting in unguaranteed imaging results and greatly limiting passive source seismic exploration applications.In addition,the quality of the reconstructed records is directly related to the time length of the noise records,but in practice it is often difficult to obtain long-term,high-quality noise segments containing body wave events.To solve the above problems,we propose a deep learning method for reconstructing passive source virtual shot records and apply it to passive source time-lapse monitoring.This method combines the UNet network and the BiLSTM(Bidirectional Long Short-Term Memory)network for extracting spatial features and temporal features respectively.It introduces the spatial attention mechanism to establish a hybrid SUNet-BiLSTM-Attention(SBA)network for supervised training.Through pre-training and fine-tuning training,the network can accurately reconstruct passive source virtual shot records directly from short-time noisy segments containing body wave events.The experimental results of theoretical data show that the virtual shot records reconstructed by the network have high resolution and signal to noise ratio(SNR),providing high-quality data for subsequent monitoring and imaging.Finally,to further validate the effectiveness of proposed method,we applied it to field data collected from gas storage in northwest China.The reconstruction results of field data effectively improve the quality of virtual records and obtain more reliable time-lapse imaging monitoring results,which have significant practical value.展开更多
In common practice in the oil fields,the injection of water and gas into reservoirs is a crucial technique to increase production.The control of the waterflooding front in oil/gas exploitation is a matter of great con...In common practice in the oil fields,the injection of water and gas into reservoirs is a crucial technique to increase production.The control of the waterflooding front in oil/gas exploitation is a matter of great concern to reservoir engineers.Monitoring the waterflooding front in oil/gas wells plays a very important role in adjusting the well network and later in production,taking advantage of the remaining oil po-tential and ultimately achieving great success in improving the recovery rate.For a long time,micro-seismic monitoring,numerical simulation,four-dimensional seismic and other methods have been widely used in waterflooding front monitoring.However,reconciling their reliability and cost poses a significant challenge.In order to achieve real-time,reliable and cost-effective monitoring,we propose an innovative method for waterflooding front monitoring through the similarity analysis of passive source time-lapse seismic images.Typically,passive source seismic data collected from oil fields have extremely low signal-to-noise ratio(SNR),which poses a serious problem for obtaining structural images.The proposed method aims to visualize and analyze underground changes by highlighting time-lapse images and provide a strategy for underground monitoring using long-term passive source data under low SNR conditions.First,we verify the feasibility of the proposed method by designing a theoretical model.Then,we conduct an analysis of the correlation coefficient(similarity)on the passive source time-lapse seismic imaging results to enhance the image differences and identify the simulated waterflooding fronts.Finally,the proposed method is applied to the actual waterflooding front monitoring tasks in Shengli Oilfield,China.The research findings indicate that the monitoring results are consistent with the actual devel-opment conditions,which in turn demonstrates that the proposed method has great potential for practical application and is very suitable for monitoring common development tasks in oil fields.展开更多
Site engineering seismic survey provides basic data for seismic effect analysis. As an important parameter of soil, shear-wave velocity is usually obtained through wave velocity testing in borehole. In this paper, the...Site engineering seismic survey provides basic data for seismic effect analysis. As an important parameter of soil, shear-wave velocity is usually obtained through wave velocity testing in borehole. In this paper, the passive source surface-wave method is introduced into the site engineering seismic survey and practically applied in an engineering site of Shijingshan District. By recording the ubiquitous weak vibration on the earth surface, extract the dispersion curve from the surface-wave components using the SPAC method and obtain the shear-wave velocity structure from inversion. Over the depth of 42 m under- ground, it totally consists of five layers with interface depth of 3.31, 4.50, 7.23, 17.41, and 42.00 m; and shear-wave velocity of 144.0, 198.3, 339.4, 744.2, and 903.7 m/s, respectively. The inversion result is used to evaluate site classification, determine the maximum shear modulus of soil, provide basis for further seismic hazard analysis and site assessment or site zoning, etc. The result shows that the passive source surface-wave method is feasible in the site engineering seismic survey and can replace boreholes,shorten survey period, and reduce engineering cost to some extent.展开更多
Passive seismic data contain large amounts of low-frequency information. To effectively extract and compensate active seismic data that lack low frequencies, we propose a multitaper spectral reconstruction method base...Passive seismic data contain large amounts of low-frequency information. To effectively extract and compensate active seismic data that lack low frequencies, we propose a multitaper spectral reconstruction method based on multiple sinusoidal tapers and derive equations for multisource and multitrace conditions. Compared to conventional cross correlation and deconvolution reconstruction methods, the proposed method can more accurately reconstruct the relative amplitude of recordings. Multidomain iterative denoising improves the SNR of retrieved data. By analyzing the spectral characteristics of passive data before and after reconstruction, we found that the data are expressed more clearly after reconstruction and denoising. To compensate for the low-frequency information in active data using passive seismic data, we match the power spectrum, supplement it, and then smooth it in the frequency domain. Finally, we use numerical simulation to verify the proposed method and conduct prestack depth migration using data after low-frequency compensation. The proposed power-matching method adds the losing low frequency information in the active seismic data using the low-frequency information of passive- source seismic data. The imaging of compensated data gives a more detailed information of deep structures.展开更多
Passive source localization via a maximum likelihood （ML） estimator can achieve a high accuracy but involves high calculation burdens, especially when based on time-of-arrival and frequency-of-arrival measurements f...Passive source localization via a maximum likelihood （ML） estimator can achieve a high accuracy but involves high calculation burdens, especially when based on time-of-arrival and frequency-of-arrival measurements for its internal nonlinearity and nonconvex nature. In this paper, we use the Pincus theorem and Monte Carlo importance sampling （MCIS） to achieve an approximate global solution to the ML problem in a computationally efficient manner. The main contribution is that we construct a probability density function （PDF） of Gaussian distribution, which is called an important function for efficient sampling, to approximate the ML estimation related to complicated distributions. The improved performance of the proposed method is at- tributed to the optimal selection of the important function and also the guaranteed convergence to a global maximum. This process greatly reduces the amount of calculation, but an initial solution estimation is required resulting from Taylor series expansion. However, the MCIS method is robust to this prior knowledge for point sampling and correction of importance weights. Simulation results show that the proposed method can achieve the Cram6r-Rao lower bound at a moderate Gaussian noise level and outper- forms the existing methods.展开更多
An approach for long-range passive impulsive source ranging with a single receiver in shallow water is proposed, which utilizes the frequency spectrum of the warped signal autocor- relation function via warping transf...An approach for long-range passive impulsive source ranging with a single receiver in shallow water is proposed, which utilizes the frequency spectrum of the warped signal autocor- relation function via warping transform. For an ideal waveguide, there are invariable frequency features both in the frequency spectrum of the warped signal corresponding to modal cut-off frequencies and the warped signal autocorrelation function due to modal interference. These intrinsic frequency features can be used to passive source ranging. So, the approximate rela- tionship between the frequency of warped signal at an unknown source range and the intrinsic frequency extracted by the time warping transform is derived. These rules can be generalized to an actual shallow water waveguide. Employing an acoustic model to offer the invariable frequency spectrum features, the impulsive signal data collected by a single hydrophone in the North Yellow Sea in December 2011 are analyzed to verify the proposed source ranging ap- proach. The estimated ranges are in good agreement with the ranges measured by GPS, and the mean relative error of range estimation is less than 10%.展开更多
Purpose–The passive source localization(PSL)problem using angles of arrival(AOA),time differences of arrival(TDOA)or gain ratios of arrival(GROA)is generally nonlinear and nontrival.In this research,the purpose of th...Purpose–The passive source localization(PSL)problem using angles of arrival(AOA),time differences of arrival(TDOA)or gain ratios of arrival(GROA)is generally nonlinear and nontrival.In this research,the purpose of this paper is to design an accurate hybrid source localization approach to solve the PSL problem.The inspiration is drawn from the fact that the bearings,TDOAs and GROAs are complementary in terms of their geometry properties.Design/methodology/approach–The maximum-likelihood(ML)method is reexamined by using hybrid measurements.Being assisted by the bearings,a new hybrid weighted least-squares(WLS)method is then proposed by jointly utilizing the bearing,TDOA and GROA measurements.Findings–Theoretical performance analysis illustrates that the mean-square error of the ML or WLS method can attain the Cramér-Rao lower bound for Gaussian noiseover small error region.However,the WLS method has much lower computational complexity than the ML algorithm.Compared with the AOA-only,TDOA-only,AOA-TDOA,TDOA-GROA methods,the localization accuracy can be greatly improved by combining the AOAs,TDOAs and GROAs,especially for some specific geometries.Originality/value–A novel bearing-assisted TDOA-GROA method is proposed for source localization,and a new hybrid WLS estimator is presented inspired from the fact that the bearings,TDOAs and GROAs are complementary in terms of their geometry properties.展开更多
Reference-frame-independent（RFI）quantum key distribution（QKD）is a protocol which can share unconditional secret keys between two remote users without the alignment of slowly varying reference frames.We propose a p...Reference-frame-independent（RFI）quantum key distribution（QKD）is a protocol which can share unconditional secret keys between two remote users without the alignment of slowly varying reference frames.We propose a passive decoy-state RFI-QKD protocol with heralded single-photon source（HSPS）and present its security analysis.Compared with RFI QKD using a weak coherent pulse source（WCPS）,numerical simulations show that the passive decoy-state RFI QKD with HSPS performs better not only in secret key rate but also in secure transmission distance.Moreover,our protocol is robust against the relative motion of the reference frames as well as RFI QKD with the WCPS.In addition,we also exploit Hoeffding＇s inequality to investigate the finite-key effect on the security of the protocol.展开更多
With the development of seismic exploration,passive-source seismic data has attracted increasing attention.Ambient noise passive seismic sources exists widely in nature and industrial production.Passive seismic data i...With the development of seismic exploration,passive-source seismic data has attracted increasing attention.Ambient noise passive seismic sources exists widely in nature and industrial production.Passive seismic data is important in logging while drilling(LWD),large-scale structural exploration,etc.In this paper,we proposed a passive multiple reverse time migration imaging(PMRTMI)method based on wavefield decomposition and normalized imaging conditions method.This method differs from seismic interferometry in that it can use raw passive seismic data directly in RTM imaging without reconstruction of virtual active gather,and we use the wavefield decomposition method to eliminate the low frequency noise in RTM.Further,the energy normalized imaging condition is used in full wavefield decomposition,which can not only enhance the image quality of both edge and deep information but also overcome the wrong energy problem caused by uneven distribution of passive sources;furthermore,this method exhibits high efficiency.Finally,numerical examples with the Marmousi model show the effectiveness of the method.展开更多
This paper presents an approach to the challenging is- sue of passive source localization in shallow water using a mobile short horizontal linear array with length less than ten meters. The short array can be convenie...This paper presents an approach to the challenging is- sue of passive source localization in shallow water using a mobile short horizontal linear array with length less than ten meters. The short array can be conveniently placed on autonomous underwa- ter vehicles and deployed for adaptive spatial sampling. However, the use of such small aperture passive sonar systems makes it difficult to acquire sufficient spatial gain for localizing long-range sources. To meet the requirement, a localization approach that employs matched-field based techniques that enable the short ho- rizontal linear array is used to passively localize acoustic sources in shallow water. Furthermore, the broadband processing and inter-position processing provide robustness against ocean en- vironmental mismatch and enhance the stability of the estimation process. The proposed approach＇s ability to localize acoustic sources in shallow water at different signal-to-noise ratios is examined through the synthetic test cases where the sources are located at the endfire and some other bearing of the mobile short horizontal linear array. The presented results demonstrate that the positional parameters of the estimated source build up over time as the array moves at a low speed along a straight line at a constant depth.展开更多
A novel 3-D MUSIC algorithm based on the classical 3D-MUSIC algorithm for the location of near-field source was presented. Under the far-field assumption of actual near-field, two algebraic relations of the location p...A novel 3-D MUSIC algorithm based on the classical 3D-MUSIC algorithm for the location of near-field source was presented. Under the far-field assumption of actual near-field, two algebraic relations of the location parameters between the actual near-field sources and the far-field ones were derived. With Fourier transformation and polynomial-root methods, the elevation and the azimuth of the far-field were obtained, the tracking paths can be developed, and the location parameters of the near-field source can be determined, then the more accurate results can be estimated using an optimization method. The computer simulation results prove that the algorithm for the location of the near-fields is more accurate, effective and suitable for real-time applications.展开更多
For maritime radiation source target tracking in particular electronic counter measures（ECM）environment,there exists two main problems which can deteriorate the tracking performance of traditional approaches.The frs...For maritime radiation source target tracking in particular electronic counter measures（ECM）environment,there exists two main problems which can deteriorate the tracking performance of traditional approaches.The frst problem is the poor observability of the radiation source.The second one is the measurement uncertainty which includes the uncertainty of the target appearing/disappearing and the detection uncertainty（false and missed detections）.A novel approach is proposed in this paper for tracking maritime radiation source in the presence of measurement uncertainty.To solve the poor observability of maritime radiation source target,using the radiation source motion restriction,the observer altitude information is incorporated into the bearings-only tracking（BOT）method to obtain the unique target localization.Then the two uncertainties in the ECM environment are modeled by the random fnite set（RFS）theory and the Bernoulli fltering method with the observer altitude is adopted to solve the tracking problem of maritime radiation source in such context.Simulation experiments verify the validity of the proposed approach for tracking maritime radiation source,and also demonstrate the superiority of the method compared with the traditional integrated probabilistic data association（IPDA）method.The tracking performance under different conditions,particularly those involving different duration of radiation source opening and switching-off,indicates that the method to solve our problem is robust and effective.展开更多
The theory of passive localization for underwater sources based on acoustic ray channel modeling is discussed. The principles of channel modeling in Ray-theory, determination of eigenrays which connect source and rece...The theory of passive localization for underwater sources based on acoustic ray channel modeling is discussed. The principles of channel modeling in Ray-theory, determination of eigenrays which connect source and receiver, analysis of DOA arriving structure and time delay spectrum arriving structure, their relationship to source location are given in the paper. Source location is estimated by matching measured DOA and TDS to their calculated counterparts. The method of Ray-theory based passive localization features its simplicity, less calculation, short array aperture and robust performance to environment parameters, as compared with those methods based on Normal Mode theory.展开更多
基金supported by the CNPC-SWPU Innovation Alliance Technology Cooperation Project(2020CX020000)the Natural Science Foundation of Sichuan Province(24NSFSC0808)the China Scholarship Council(202306440144).
文摘Passive source imaging can reconstruct body wave reflections similar to those of active sources through seismic interferometry(SI).It has become a low-cost,environmentally friendly alternative to active source seismic,showing great potential.However,this method faces many challenges in practical applications,including uneven distribution of underground sources and complex survey environments.These situations seriously affect the reconstruction quality of virtual shot records,resulting in unguaranteed imaging results and greatly limiting passive source seismic exploration applications.In addition,the quality of the reconstructed records is directly related to the time length of the noise records,but in practice it is often difficult to obtain long-term,high-quality noise segments containing body wave events.To solve the above problems,we propose a deep learning method for reconstructing passive source virtual shot records and apply it to passive source time-lapse monitoring.This method combines the UNet network and the BiLSTM(Bidirectional Long Short-Term Memory)network for extracting spatial features and temporal features respectively.It introduces the spatial attention mechanism to establish a hybrid SUNet-BiLSTM-Attention(SBA)network for supervised training.Through pre-training and fine-tuning training,the network can accurately reconstruct passive source virtual shot records directly from short-time noisy segments containing body wave events.The experimental results of theoretical data show that the virtual shot records reconstructed by the network have high resolution and signal to noise ratio(SNR),providing high-quality data for subsequent monitoring and imaging.Finally,to further validate the effectiveness of proposed method,we applied it to field data collected from gas storage in northwest China.The reconstruction results of field data effectively improve the quality of virtual records and obtain more reliable time-lapse imaging monitoring results,which have significant practical value.
基金supported by the CNPC-SWPU Innovation Alliance Technology Cooperation Project(2020CX020000)the National Natural Science Foundation of China(42022028)+1 种基金the Natural Science Foundation of Sichuan Province(24NSFSC0808)the China Scholarship Council(202306440144)。
文摘In common practice in the oil fields,the injection of water and gas into reservoirs is a crucial technique to increase production.The control of the waterflooding front in oil/gas exploitation is a matter of great concern to reservoir engineers.Monitoring the waterflooding front in oil/gas wells plays a very important role in adjusting the well network and later in production,taking advantage of the remaining oil po-tential and ultimately achieving great success in improving the recovery rate.For a long time,micro-seismic monitoring,numerical simulation,four-dimensional seismic and other methods have been widely used in waterflooding front monitoring.However,reconciling their reliability and cost poses a significant challenge.In order to achieve real-time,reliable and cost-effective monitoring,we propose an innovative method for waterflooding front monitoring through the similarity analysis of passive source time-lapse seismic images.Typically,passive source seismic data collected from oil fields have extremely low signal-to-noise ratio(SNR),which poses a serious problem for obtaining structural images.The proposed method aims to visualize and analyze underground changes by highlighting time-lapse images and provide a strategy for underground monitoring using long-term passive source data under low SNR conditions.First,we verify the feasibility of the proposed method by designing a theoretical model.Then,we conduct an analysis of the correlation coefficient(similarity)on the passive source time-lapse seismic imaging results to enhance the image differences and identify the simulated waterflooding fronts.Finally,the proposed method is applied to the actual waterflooding front monitoring tasks in Shengli Oilfield,China.The research findings indicate that the monitoring results are consistent with the actual devel-opment conditions,which in turn demonstrates that the proposed method has great potential for practical application and is very suitable for monitoring common development tasks in oil fields.
基金supported by National Natural Science Foundation of China (No. 41174085)Chinese Academy of Sciences (KZZD-EW-TZ-19)China Geological Survey (12120113101400)
文摘Site engineering seismic survey provides basic data for seismic effect analysis. As an important parameter of soil, shear-wave velocity is usually obtained through wave velocity testing in borehole. In this paper, the passive source surface-wave method is introduced into the site engineering seismic survey and practically applied in an engineering site of Shijingshan District. By recording the ubiquitous weak vibration on the earth surface, extract the dispersion curve from the surface-wave components using the SPAC method and obtain the shear-wave velocity structure from inversion. Over the depth of 42 m under- ground, it totally consists of five layers with interface depth of 3.31, 4.50, 7.23, 17.41, and 42.00 m; and shear-wave velocity of 144.0, 198.3, 339.4, 744.2, and 903.7 m/s, respectively. The inversion result is used to evaluate site classification, determine the maximum shear modulus of soil, provide basis for further seismic hazard analysis and site assessment or site zoning, etc. The result shows that the passive source surface-wave method is feasible in the site engineering seismic survey and can replace boreholes,shorten survey period, and reduce engineering cost to some extent.
基金sponsored by the Natural Science Foundation of China(No.41374115)National High Technology Research and Development Program of China(863 project)(No.2014AA06A605)
文摘Passive seismic data contain large amounts of low-frequency information. To effectively extract and compensate active seismic data that lack low frequencies, we propose a multitaper spectral reconstruction method based on multiple sinusoidal tapers and derive equations for multisource and multitrace conditions. Compared to conventional cross correlation and deconvolution reconstruction methods, the proposed method can more accurately reconstruct the relative amplitude of recordings. Multidomain iterative denoising improves the SNR of retrieved data. By analyzing the spectral characteristics of passive data before and after reconstruction, we found that the data are expressed more clearly after reconstruction and denoising. To compensate for the low-frequency information in active data using passive seismic data, we match the power spectrum, supplement it, and then smooth it in the frequency domain. Finally, we use numerical simulation to verify the proposed method and conduct prestack depth migration using data after low-frequency compensation. The proposed power-matching method adds the losing low frequency information in the active seismic data using the low-frequency information of passive- source seismic data. The imaging of compensated data gives a more detailed information of deep structures.
基金Project supported by the National Natural Science Foundation of China （No. 61201381 ） and the China Postdoctoral Science Foundation （No. 2016M592989）
文摘Passive source localization via a maximum likelihood （ML） estimator can achieve a high accuracy but involves high calculation burdens, especially when based on time-of-arrival and frequency-of-arrival measurements for its internal nonlinearity and nonconvex nature. In this paper, we use the Pincus theorem and Monte Carlo importance sampling （MCIS） to achieve an approximate global solution to the ML problem in a computationally efficient manner. The main contribution is that we construct a probability density function （PDF） of Gaussian distribution, which is called an important function for efficient sampling, to approximate the ML estimation related to complicated distributions. The improved performance of the proposed method is at- tributed to the optimal selection of the important function and also the guaranteed convergence to a global maximum. This process greatly reduces the amount of calculation, but an initial solution estimation is required resulting from Taylor series expansion. However, the MCIS method is robust to this prior knowledge for point sampling and correction of importance weights. Simulation results show that the proposed method can achieve the Cram6r-Rao lower bound at a moderate Gaussian noise level and outper- forms the existing methods.
基金supported by the Program of One Hundred Talented People of the Chinese Academy of Sciencesthe National Natural Science Foundation of China(11174312,10974218,11125420)
文摘An approach for long-range passive impulsive source ranging with a single receiver in shallow water is proposed, which utilizes the frequency spectrum of the warped signal autocor- relation function via warping transform. For an ideal waveguide, there are invariable frequency features both in the frequency spectrum of the warped signal corresponding to modal cut-off frequencies and the warped signal autocorrelation function due to modal interference. These intrinsic frequency features can be used to passive source ranging. So, the approximate rela- tionship between the frequency of warped signal at an unknown source range and the intrinsic frequency extracted by the time warping transform is derived. These rules can be generalized to an actual shallow water waveguide. Employing an acoustic model to offer the invariable frequency spectrum features, the impulsive signal data collected by a single hydrophone in the North Yellow Sea in December 2011 are analyzed to verify the proposed source ranging ap- proach. The estimated ranges are in good agreement with the ranges measured by GPS, and the mean relative error of range estimation is less than 10%.
文摘Purpose–The passive source localization(PSL)problem using angles of arrival(AOA),time differences of arrival(TDOA)or gain ratios of arrival(GROA)is generally nonlinear and nontrival.In this research,the purpose of this paper is to design an accurate hybrid source localization approach to solve the PSL problem.The inspiration is drawn from the fact that the bearings,TDOAs and GROAs are complementary in terms of their geometry properties.Design/methodology/approach–The maximum-likelihood(ML)method is reexamined by using hybrid measurements.Being assisted by the bearings,a new hybrid weighted least-squares(WLS)method is then proposed by jointly utilizing the bearing,TDOA and GROA measurements.Findings–Theoretical performance analysis illustrates that the mean-square error of the ML or WLS method can attain the Cramér-Rao lower bound for Gaussian noiseover small error region.However,the WLS method has much lower computational complexity than the ML algorithm.Compared with the AOA-only,TDOA-only,AOA-TDOA,TDOA-GROA methods,the localization accuracy can be greatly improved by combining the AOAs,TDOAs and GROAs,especially for some specific geometries.Originality/value–A novel bearing-assisted TDOA-GROA method is proposed for source localization,and a new hybrid WLS estimator is presented inspired from the fact that the bearings,TDOAs and GROAs are complementary in terms of their geometry properties.
基金Supported by the National Basic Research Program of China under Grant No 2013CB338002the National Natural Science Foundation of China under Grant Nos 61505261,61675235,61605248 and 11304397
文摘Reference-frame-independent（RFI）quantum key distribution（QKD）is a protocol which can share unconditional secret keys between two remote users without the alignment of slowly varying reference frames.We propose a passive decoy-state RFI-QKD protocol with heralded single-photon source（HSPS）and present its security analysis.Compared with RFI QKD using a weak coherent pulse source（WCPS）,numerical simulations show that the passive decoy-state RFI QKD with HSPS performs better not only in secret key rate but also in secure transmission distance.Moreover,our protocol is robust against the relative motion of the reference frames as well as RFI QKD with the WCPS.In addition,we also exploit Hoeffding＇s inequality to investigate the finite-key effect on the security of the protocol.
基金sponsored by the Natural Science Foundation of China(No.41874139)the Natural Science Foundation of China(No.41674124)Jilin Province Foundation for Excellent Youths(No.20190103139JH)
文摘With the development of seismic exploration,passive-source seismic data has attracted increasing attention.Ambient noise passive seismic sources exists widely in nature and industrial production.Passive seismic data is important in logging while drilling(LWD),large-scale structural exploration,etc.In this paper,we proposed a passive multiple reverse time migration imaging(PMRTMI)method based on wavefield decomposition and normalized imaging conditions method.This method differs from seismic interferometry in that it can use raw passive seismic data directly in RTM imaging without reconstruction of virtual active gather,and we use the wavefield decomposition method to eliminate the low frequency noise in RTM.Further,the energy normalized imaging condition is used in full wavefield decomposition,which can not only enhance the image quality of both edge and deep information but also overcome the wrong energy problem caused by uneven distribution of passive sources;furthermore,this method exhibits high efficiency.Finally,numerical examples with the Marmousi model show the effectiveness of the method.
基金supported by the State Scholarship Fund(2011611091)supported by China Shipbuilding Industry Corporation
文摘This paper presents an approach to the challenging is- sue of passive source localization in shallow water using a mobile short horizontal linear array with length less than ten meters. The short array can be conveniently placed on autonomous underwa- ter vehicles and deployed for adaptive spatial sampling. However, the use of such small aperture passive sonar systems makes it difficult to acquire sufficient spatial gain for localizing long-range sources. To meet the requirement, a localization approach that employs matched-field based techniques that enable the short ho- rizontal linear array is used to passively localize acoustic sources in shallow water. Furthermore, the broadband processing and inter-position processing provide robustness against ocean en- vironmental mismatch and enhance the stability of the estimation process. The proposed approach＇s ability to localize acoustic sources in shallow water at different signal-to-noise ratios is examined through the synthetic test cases where the sources are located at the endfire and some other bearing of the mobile short horizontal linear array. The presented results demonstrate that the positional parameters of the estimated source build up over time as the array moves at a low speed along a straight line at a constant depth.
文摘A novel 3-D MUSIC algorithm based on the classical 3D-MUSIC algorithm for the location of near-field source was presented. Under the far-field assumption of actual near-field, two algebraic relations of the location parameters between the actual near-field sources and the far-field ones were derived. With Fourier transformation and polynomial-root methods, the elevation and the azimuth of the far-field were obtained, the tracking paths can be developed, and the location parameters of the near-field source can be determined, then the more accurate results can be estimated using an optimization method. The computer simulation results prove that the algorithm for the location of the near-fields is more accurate, effective and suitable for real-time applications.
基金supported by the National Natural Science Foundation of China(No.61101186)
文摘For maritime radiation source target tracking in particular electronic counter measures（ECM）environment,there exists two main problems which can deteriorate the tracking performance of traditional approaches.The frst problem is the poor observability of the radiation source.The second one is the measurement uncertainty which includes the uncertainty of the target appearing/disappearing and the detection uncertainty（false and missed detections）.A novel approach is proposed in this paper for tracking maritime radiation source in the presence of measurement uncertainty.To solve the poor observability of maritime radiation source target,using the radiation source motion restriction,the observer altitude information is incorporated into the bearings-only tracking（BOT）method to obtain the unique target localization.Then the two uncertainties in the ECM environment are modeled by the random fnite set（RFS）theory and the Bernoulli fltering method with the observer altitude is adopted to solve the tracking problem of maritime radiation source in such context.Simulation experiments verify the validity of the proposed approach for tracking maritime radiation source,and also demonstrate the superiority of the method compared with the traditional integrated probabilistic data association（IPDA）method.The tracking performance under different conditions,particularly those involving different duration of radiation source opening and switching-off,indicates that the method to solve our problem is robust and effective.
文摘The theory of passive localization for underwater sources based on acoustic ray channel modeling is discussed. The principles of channel modeling in Ray-theory, determination of eigenrays which connect source and receiver, analysis of DOA arriving structure and time delay spectrum arriving structure, their relationship to source location are given in the paper. Source location is estimated by matching measured DOA and TDS to their calculated counterparts. The method of Ray-theory based passive localization features its simplicity, less calculation, short array aperture and robust performance to environment parameters, as compared with those methods based on Normal Mode theory.
