An algorithm that can implement particle shape recognition and size measurement in hybrid particle field is proposed.Based on the defocused images obtained by the interferometric particle imaging(IPI)system,shape reco...An algorithm that can implement particle shape recognition and size measurement in hybrid particle field is proposed.Based on the defocused images obtained by the interferometric particle imaging(IPI)system,shape recognition of particles can be realized through Res Net50.Two-dimensional(2D)Fourier transform and 2D autocorrelation transform are used to obtain the size of spherical and non-spherical particles,respectively.The shape and size of the particle in hybrid particle field are determined.Numerical simulation and experiment results suggest that the method has good accuracy in measuring the particle size in hybrid particle field.展开更多
In this study,the particle size-resolved distribution from a China-3 certificated light-duty diesel vehicle was measured by using a portable emission measurement system（PEMS）.In order to examine the influences of ve...In this study,the particle size-resolved distribution from a China-3 certificated light-duty diesel vehicle was measured by using a portable emission measurement system（PEMS）.In order to examine the influences of vehicle specific power（VSP） and high-altitude operation,measurements were conducted at 8 constant speeds,which ranged from 10 to 80 km/hr at10 km/hr intervals,and two different high altitudes,namely 2200 and 3200 m.The results demonstrated that the numbers of particles in all size ranges decreased significantly as VSP increased when the test vehicle was running at lower speeds（〈 20 km/hr）,while at a moderate speed（between 30 and 60 km/hr）,the particle number was statistically insensitive to increase VSP.Under high-speed cruising conditions,the numbers of ultrafine particles and PM2.5were insensitive to changes in VSP,but the numbers of nanoparticles and PM10 surged considerably.An increase in the operational altitude of the test vehicle resulted in increased particle number emissions at low and high driving speeds;however,particle numbers obtained at moderate speeds decreased as altitude rose.When the test vehicle was running at moderate speeds,particle numbers measured at the two altitudes were very close,except for comparatively higher number concentrations of nanoparticles measured at 2200 m.展开更多
Based on the laser diffraction and Shifrin transform,the measurement method of particle size distribution has been improved extensively.While in real measurements,some noise peaks exist in the inversion data and are e...Based on the laser diffraction and Shifrin transform,the measurement method of particle size distribution has been improved extensively.While in real measurements,some noise peaks exist in the inversion data and are easily to be misread as particle distribution peaks.The improved method used a truncation function as a filter is hard to distinguish adjacent peaks.Here,by introducing the bimodal resolution criterion,the filter function is optimized,and to a quasi truncation function with the optimized filter function is studied to achieve optimal bimodal resolution and to remove noise peaks.This new quasi truncation function fits multimode distribution very well.By combining the quasi truncation function with Shifrin transform,noise peaks are removed well and the adjacent peaks are distinguished clearly.Finally,laser diffraction experiments are conducted and the particle size distribution is analyzed by adoping the method.The results show that the quasi truncation function has better bimodal resolution than the truncation function.Generally,by combining the quasi truncation function with the Shifrin transform,in particle size distribution measurements with laser diffraction,the bimodal resolution is greatly increased and the noise is removed well.And the results can restore the original distribution perfectly.Therefore,the new method with combination of the quasi truncation function and the Shifrin transform provides a feasible and effective way to measure the multimode particle size distribution by laser diffraction.展开更多
Developing the railway transport sector is a challenging scientific,economic and social research topic starting with ensuring human security.The main topic that should be developed in that sense is the ballast stabili...Developing the railway transport sector is a challenging scientific,economic and social research topic starting with ensuring human security.The main topic that should be developed in that sense is the ballast stability and dynamical behaviour under external loading and environmental changes.This paper investigates the effect of particle size distribution and normal pressure on the mechanical response of a ballast bed.Grading curves of ballast layers with different sizes are illustrated to discuss their strength behaviour under various strains to deduce the significant effect on the direct shear performance of the ballast layer.Direct shear tests with different Particle Size Distribution(PSD)were reproduced using the Discrete Element Method(DEM).It is noticed that when the number of small-sized ballast increases,the shear strength and the friction angle increase to varying degrees under different normal pressures,with an average increase of 27%and 8%,respectively.When the number of large-sized ballast decreases,the shear strength and the friction angle decrease to varying degrees under different normal pressures,with an average decrease of 6%and 3%,respectively.展开更多
This work used 5CrMnMo steel and titanium carbide(TiC)powders to fabricate particulate metal matrix composites(PMMCS).The composites’microstructure,hardness,and impact toughness were compared with four different tita...This work used 5CrMnMo steel and titanium carbide(TiC)powders to fabricate particulate metal matrix composites(PMMCS).The composites’microstructure,hardness,and impact toughness were compared with four different titanium carbide ceramic particle sizes.The phase composition and microstructure of composites were studied.Vickers hardness and Charpy impact tests were employed to analyze composites’hardness and impact ductility,respectively.The results showed that the four groups of composites are mainly composed of martensite,trace residual austenite,and titanium carbide(undissolved TiC and primary TiC particles).With the growth of the ceramic particle dimension in the composite layer,the number of primary titanium carbide ceramics gradually decreased.When the initial ceramic particle size was small,it tended to generate dendritic primary TiC,and when the particle size was large,it tended to generate polygons and ellipsoids.Furthermore,with the growth of titanium carbide ceramic particle dimension in the composites,the hardness of the composites decreased but the impact toughness of the composites rose first and then descended.When the ceramic particle size was 50-75μm,the composite had the highest hardness,and the impact energy of the composites was the highest,which is 8 J.This was because there were more undissolved titanium carbide ceramics in the composite,and there was a thicker matrix metal between the ceramic particles.展开更多
The increased risk of chronic diseases has led to increasing importance of coarse foods in daily life,but the inclusion of new ingredients has a great degree of influence on the structural characteristics and sensory ...The increased risk of chronic diseases has led to increasing importance of coarse foods in daily life,but the inclusion of new ingredients has a great degree of influence on the structural characteristics and sensory qualities of the food.The effects of five different particle size variations on the physicochemical characteristics,dough,and steamed bread structure of Flaxseed-based milk coproduct(FMC)were investigated.As the particle size decreases,the structure of the dough becomes denser due to an increase in water retention capacity and dissolution capacity,weakening the competition for dough moisture and allowing for an increase in air-holding capacity.The reduction in particle size increased the specific volume of the steamed bread,a decrease in the spread ratio,and an optimization of hardness and elasticity,as well as an increase in consumer acceptance of the FMC steamed bread.However,it is not the smaller the particle size,the higher the quality of steamed bread,appropriate reduction of particle size can improve the quality of steamed bread.In addition,the addition of FMC reduces fat digestion.Therefore,the present study proposes a method to change the particle size of FMC to optimize the quality of the steamed bread and to reduce fat digestibility by adding FMC.展开更多
High-steep waste dumps in open-pit mines frequently demonstrate complex particle-size distributions and fractal characteristics along their slopes,which have a significant impact on slope stability.This study takes th...High-steep waste dumps in open-pit mines frequently demonstrate complex particle-size distributions and fractal characteristics along their slopes,which have a significant impact on slope stability.This study takes the Dasuji South waste dump in Inner Mongolia as a case to quantify the fractal dimensions of soil-rock mixtures at various slope heights,and to clarify how these fractal properties govern shear strength and deformation behavior under overlying stress,thereby affecting the overall stability of the waste dump slope.Field sampling and laboratory tests were conducted to determine the particle-size composition and fractal dimensions while direct shear tests were conducted and revealed that lower fractal dimensions indicating coarser particle assemblages significantly enhance shear resistance.Complementary PFC_(2)D discrete element simulations demonstrate that slopes composed of lower-fractaldimension materials deform less and contain localized deformation zones,whereas higher-fractal-dimension slopes experience more extensive displacement and a heightened risk of landslides.These findings refine our understanding of the relationship between fractal grain-size distribution and slope stability,providing a robust theoretical basis for improved stability assessment and optimized support strategies in deep open-pit mining waste dumps,and ultimately aiding in more effective disaster prevention within geotechnical engineering.展开更多
The acidity of atmospheric aerosols influences fundamental physicochemical processes that affect climate and human health.We recently developed a novel and facilewater-probebased method for directly measuring of the p...The acidity of atmospheric aerosols influences fundamental physicochemical processes that affect climate and human health.We recently developed a novel and facilewater-probebased method for directly measuring of the pH for micrometer-size droplets,providing a promising technique to better understand aerosol acidity in the atmosphere.The complex chemical composition of fine particles in the ambient air,however,poses certain challenges to using a water-probe for pH measurement,including interference from interactions between compositions and the influence of similar compositions on water structure.To explore the universality of our method,it was employed to measure the pH of ammonium,nitrate,carbonate,sulfate,and chloride particles.The pH of particles covering a broad range(0–14)were accurately determined,thereby demonstrating that our method can be generally applied,even to alkaline particles.Furthermore,a standard spectral library was developed by integrating the standard spectra of common hydrated ions extracted through the waterprobe.The library can be employed to identify particle composition and overcome the spectral overlap problem resulting from similar effects.Using the spectral library,all ions were identified and their concentrations were determined,in turn allowing successful pH measurement of multicomponent(ammonium-sulfate-nitrate-chloride)particles.Insights into the synergistic effect of Cl^(–),NO_(3)^(–),and NH_(4)^(+)depletion obtained with our approach revealed the interplay between pH and volatile partitioning.Given the ubiquity of component partitioning and pH variation in particles,the water probemay provide a new perspective on the underlying mechanisms of aerosol aging and aerosol–cloud interaction.展开更多
Low-cost sensors are widely used to collect high-spatial-resolution particulate matter data that traditional reference monitoring devices cannot.In addition to the mass concentration,the number concentration and size ...Low-cost sensors are widely used to collect high-spatial-resolution particulate matter data that traditional reference monitoring devices cannot.In addition to the mass concentration,the number concentration and size distribution are also fundamental in determining the origin and hazard level of particulate pollution.Therefore,low-cost optical sensors have been improved to establish optical particle sizers(OPSs).In this study,a low-cost OPS,the Nova SDS029,is introduced,and it is evaluated in comparison to two reference instruments—the GRIMM 11-D and the TSI 3330.We first tested the sizing accuracy using polystyrene latex spheres.Then,we assessed the mass and number size distribution accuracy in three application scenarios:indoor smoking,ambient air quality,and mobile monitoring.The evaluations suggest that the low-cost SDS029 rivals research-grade optical sizers in many aspects.For example,(1)the particle diameters obtained with the SDS029 are close to the reference instruments(usually<10%)in the 0.3-5μm range;(2)the number of particles and mass concentration are highly correlated(r≥0.99)with the values obtained with the reference instruments;and(3)the SDS029 slightly underestimates the number concentration,but the derived PM_(2.5)values are closer to monitoring station than the reference instruments.The successful application of the SDS029 in multiple scenarios suggests that a plausible particle size distribution can be obtained in an easy and cost-efficient way.We believe that low-cost OPSs will increasingly be used to map the sources and risk levels of particles at the city scale.展开更多
This paper presents the basic principles of particle size measurement and latest industrial results recorded using an innovative optical instrumentation system designed to measure the size distribution of particles in...This paper presents the basic principles of particle size measurement and latest industrial results recorded using an innovative optical instrumentation system designed to measure the size distribution of particles in a pneumatic suspension.The system is non-intrusive and cost-effective.A low-cost CCD camera is used to capture images of the particulate flow field,which is illuminated by a low-cost pulsed laser sheet generator.The particle size distribution is then determined by processing the particle images through the use of novel processing algorithms.Experimental results obtained in the past on a small scale particle flow test rig have demonstrated that the system is capable of measuring the size distribution of pneumatically conveyed particles with an accuracy of a few percent.For the present paper results obtained when testing the system at a 4 MW industrial test facility are presented.Comparisons are made with both off-line reference data achieved through sieving and on-line laser diffraction data recorded using an intrusive,extractive,Malvern Instruments system.In general there is good agreement between results when considering the characteristics and limitations of the individual methodologies.The novel imaging system shows itself to be rugged,practical and useful under genuine industrial conditions.展开更多
Wind erosion is a geomorphic process in arid and semi-arid areas and has substantial implications for regional climate and desertification.In the Columbia Plateau of northwestern United States,the emissions from fine ...Wind erosion is a geomorphic process in arid and semi-arid areas and has substantial implications for regional climate and desertification.In the Columbia Plateau of northwestern United States,the emissions from fine particles of loessial soils often contribute to the exceedance of inhalable particulate matter(PM)with an aerodynamic diameter of 10μm or less(PM10)according to the air quality standards.However,little is known about the threshold friction velocity(TFV)for particles of different sizes that comprise these soils.In this study,soil samples of two representative soil types(Warden sandy loam and Ritzville silt loam)collected from the Columbia Plateau were sieved to seven particle size fractions,and an experiment was then conducted to determine the relationship between TFV and particle size fraction.The results revealed that soil particle size significantly affected the initiation of soil movement and TFV;TFV ranged 0.304-0.844 and 0.249-0.739 m/s for different particle size fractions of Ritzville silt loam and Warden sandy loam,respectively.PM10 and total suspended particulates(TSP)emissions from a bed of 63-90μm soil particles were markedly higher for Warden sandy loam than for Ritzville silt loam.Together with the lower TFV of Warden sandy loam,dust emissions from fine particles(<100μm in diameter)of Warden sandy loam thus may be a main contributor to dust in the region's atmosphere,since the PM10 emissions from the soil erosion surfaces and its ensuing suspension within the atmosphere constitute an essential process of soil erosion in the Columbia Plateau.Developing and implementing strategic land management practices on sandy loam soils is therefore necessary to control dust emissions in the Columbia Plateau.展开更多
In recent years,the Cloud Imaging Probe(CIP)and Precipitation Imaging Probe(PIP)produced by Droplet Measurement Technologies(DMT)have been introduced by a number of meteorological research and operation centers in Chi...In recent years,the Cloud Imaging Probe(CIP)and Precipitation Imaging Probe(PIP)produced by Droplet Measurement Technologies(DMT)have been introduced by a number of meteorological research and operation centers in China.The supporting software provided by DMT,i.e.,PADS(Particle Analysis and Display System),cannot output detailed information on each individual particle,which definitely limits the in-depth utilization of cloud and precipitation particle image data in China.In this paper,particle-by-particle information was extracted by decompressing the CIP and PIP original particle image data,based on which a new definition of the dimension for nonspherical particles is proposed by using the area of the convex hull enclosing a particle to obtain the equivalent diameter of a circle with equal area.Based on the data detected during one flight in Inner Mongolia,the particle size distribution obtained using the new particle size definition and that used by the other four existing definitions are compared.The results show that the particle number concentration calculated using different particle size definitions can vary by up to an order of magnitude.The result obtained based on the new particle size definition is closest to that calculated with the area-equivalent diameter definition.展开更多
The effects of high-volume slag-fly ash cement with different particle sizes on hydration degree,microstructure and mechanical properties were systematically studied,by means of laser particle size(DLS),X-ray diffract...The effects of high-volume slag-fly ash cement with different particle sizes on hydration degree,microstructure and mechanical properties were systematically studied,by means of laser particle size(DLS),X-ray diffraction (XRD),comprehensive thermal analysis (TG-DTA),scanning electron microscopy(SEM) and mechanical properties tests.The results show that suitable particle size distribution of cementitious material has significantly promoting effects on hydration reaction rate and mechanical properties.Compared with slag without further grinding,the slag after ball milling for 4 h has an obvious improvement in reactivity,which also provides a faster hydration rate and higher compressive strength for the cementitious material.When the slag milled for 1 and 4 h is mixed at a mass ratio of 2:1 (i e,slag with D_(50) of 7.4μm and average size of 9.9μm,and slag with D_(50) value of 2.6μm and average size of 5.3μm),and a certain amount of fly ash is added in,the most obvious improvement of compressive strength of cement is achieved.展开更多
Fireworks(FW)could significantly worsen air quality in short term during celebrations.Due to similar tracers with biomass burning(BB),the fast and precise qualification of FW and BB is still challenging.In this study,...Fireworks(FW)could significantly worsen air quality in short term during celebrations.Due to similar tracers with biomass burning(BB),the fast and precise qualification of FW and BB is still challenging.In this study,online bulk and single-particle measurements were combined to investigate the contributions of FW and BB to the overall mass concentrations of PM_(2.5)and specific chemical species by positive matrix factorization(PMF)during the Chinese New Year in Hong Kong in February 2013.With combined information,fresh/aged FW(abundant ^(140)K_(2)NO_(3)^(+)and ^(213)K_(3)SO_(4)^(+)formed from ^(113)K_(2)Cl^(+)discharged by fresh FW)can be extracted from the fresh/aged BB sources,in addition to the Second Aerosol,Vehicles+Road Dust,and Sea Salt factors.The contributions of FW and BB were investigated during three high particle matter episodes influenced by the pollution transported from the Pearl River Delta region.The fresh BB/FW contributed 39.2%and 19.6%to PM_(2.5)during the Lunar Chinese New Year case.However,the contributions of aged FW/BB enhanced in the last two episodes due to the aging process,evidenced by high contributions from secondary aerosols.Generally,the fresh BB/FW showed more significant contributions to nitrate(35.1%and15.0%,respectively)compared with sulfate(25.1%and 5.9%,respectively)and OC(14.8%and11.1%,respectively)on average.In comparison,the aged FW contributed more to sulfate(13.4%).Overall,combining online bulk and single-particle measurement data can combine both instruments’advantages and provide a new perspective for applying source apportionment of aerosols using PMF.展开更多
The traditional standard wet sieving method uses steel sieves with aperture?0.063 mm and can only determine the particle size distribution(PSD)of gravel and sand in general soil.This paper extends the traditional meth...The traditional standard wet sieving method uses steel sieves with aperture?0.063 mm and can only determine the particle size distribution(PSD)of gravel and sand in general soil.This paper extends the traditional method and presents an extended wet sieving method.The extended method uses both the steel sieves and the nylon filter cloth sieves.The apertures of the cloth sieves are smaller than 0.063 mm and equal 0.048 mm,0.038 mm,0.014 mm,0.012 mm,0.0063 mm,0.004 mm,0.003 mm,0.002 mm,and 0.001 mm,respectively.The extended method uses five steps to separate the general soil into many material sub-groups of gravel,sand,silt and clay with known particle size ranges.The complete PSD of the general soil is then calculated from the dry masses of the individual material sub-groups.The extended method is demonstrated with a general soil of completely decomposed granite(CDG)in Hong Kong,China.The silt and clay materials with different particle size ranges are further examined,checked and verified using stereomicroscopic observation,physical and chemical property tests.The results further confirm the correctness of the extended wet sieving method.展开更多
Sediment constitutes the fundamental basis for forming and evolving aeolian geomorphology.The characteristics of sediment particle size offer insights into the development and evolution of sandy terrain,making their s...Sediment constitutes the fundamental basis for forming and evolving aeolian geomorphology.The characteristics of sediment particle size offer insights into the development and evolution of sandy terrain,making their study critical to understanding aeolian geomorphology and sand control.In this study,we combined high-density collection of surface sediments in the Uzhumqin sand dunes and GIS spatial analysis to analyze the particle size parameters and changes in the spatial distribution of surface sediments in this region.In addition,we used an end-member analysis to identify the potential sources of the sediments.The results showed that surface sediments in the Uzhumqin sand dunes had distinct spatial distributions.Medium and coarse grain sands dominated the sediments in the dunes,and the mean grain size and the sorting coefficient generally increased along the prevailing wind direction,with high values in individual areas related to factors such as material sources and vegetation cover.Skewness was strongly influenced by factors such as landform change and human activity,and spatial variability became more complex.Kurtosis and the soil fractal dimension showed generally decreasing trends along the prevailing wind direction.With dune fixation,the contents of clay and powder particles in the soil increased;the mean particle size,the sorting coefficient,and the fractal dimension of the soil gradually increased,and the skewness and kurtosis gradually decreased.The end-member analysis results indicated the existence of five end-members(EM)in the dune sediments.EM 1 was a mixed component of wind-deposited fine sands and nearby fluvial sediments.EM 2 was the main component of sediments in the study area and was the result of sorting lake sediments by wind action and by the local topography.EM 3 may be a product of river flood deposition.EM 4 and EM 5 had coarser grain sizes.EM 4 was a lake-phase sediment product influenced by topographic and vegetation cover factors,and EM 5 was primarily a river and lake sediment product modified by weathering.The sediment particle size results from the study area indicate that the sediment in the sandy region is generally coarse due to multiple factors,including topography,climate,hydrology,and human activity.Sandy material in the study area originated from nearby,with very little sand being transported from long distances.展开更多
High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality c...High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality consistency,equipment miniaturization,and minimum manpower is an inevitable requirement to adapt to the current social technology development trend.Here reported is the microfluidic preparation of u-DAAF with tunable particle size by a passive swirling microreactor.Under the guidance of recrystallization growth kinetics and mixing behavior of fluids in the swirling microreactor,the key parameters(liquid flow rate,explosive concentration and crystallization temperature)were screened and optimized through screening experiments.Under the condition that no surfactant is added and only experimental parameters are controlled,the particle size of recrystallized DAAF can be adjusted from 98 nm to 785 nm,and the corresponding specific surface area is 8.45 m^(2)·g^(-1)to 1.33 m^(2)·g^(-1).In addition,the preparation method has good batch stability,high yield(90.8%-92.6%)and high purity(99.0%-99.4%),indicating a high practical application potential.Electric explosion derived flyer initiation tests demonstrate that the u-DAAF shows an initiation sensitivity much lower than that of the raw DAAF,and comparable to that of the refined DAAF by conventional spraying crystallization method.This study provides an efficient method to fabricate u-DAAF with narrow particle size distribution and high reproducibility as well as a theoretical reference for fabrication of other ultrafine explosives.展开更多
The particle size distribution of polymer always develops in emulsion polymerization systems,and certain key phenomena/mechanisms as well as properties of the final product are significantly affected by this distribut...The particle size distribution of polymer always develops in emulsion polymerization systems,and certain key phenomena/mechanisms as well as properties of the final product are significantly affected by this distribution.This review mainly focuses on the measurement methods of particle size distribution rather than average particle size during the emulsion polymerization process,including the existing off-line,on-line,and in-line measurement methods.Moreover,the principle,resolution,performance,advantages,and drawbacks of various methods for evaluating particle size distribution are contrasted and illustrated.Besides,several possible development directions or solutions of the in-line measurement technology are explored.展开更多
Background Reduction of the particle size of corn increases energy digestibility and concentrations of digestible and metabolizable energy.Pelleting may also reduce particle size of grain,but it is not known if there ...Background Reduction of the particle size of corn increases energy digestibility and concentrations of digestible and metabolizable energy.Pelleting may also reduce particle size of grain,but it is not known if there are interactions between particle size reduction and pelleting.The objective of this experiment was to test the hypothesis that particle size reduction and pelleting,separately or in combination,increase N balance,apparent total tract digestibility(ATTD)of fiber and fat,and net energy(NE)in corn-soybean meal diets fed to group-housed pigs.Methods Six corn-soybean meal-based diets were used in a 3×2 factorial design with 3 particle sizes of corn(i.e.,700,500,or 300μm)and 2 diet forms(i.e.,meal or pelleted).Pigs were allowed ad libitum access to feed and water.Twenty-four castrated male pigs(initial weight:29.52 kg;standard diviation:1.40)were allotted to the 6 diets using a 6×6 Latin square design with 6 calorimeter chambers(i.e.,4 pigs/chamber)and 6 periods.Oxygen consumption and CO_(2)and CH_(4)productions were measured during fed and fasting states and fecal and urine samples were collected.Results Regardless of particle size of corn,the ATTD of gross energy(GE),N,and acid-hydrolyzed ether extract(AEE),and the concentration of NE were greater(P<0.05)in pelleted diets than in meal diets.Regardless of diet form,the ATTD of GE,N,and AEE,and the concentration of NE were increased(linear;P<0.05)by reducing the particle size of corn,but the increase was greater in meal diets than in pelleted diets(interaction;P<0.05).Conclusions Both pelleting and reduction of corn particle size increased nutrient digestibility and NE,but increases were greater in meal diets than in pelleted diets.展开更多
The microstructure and microsegregation of atomized powder,which depend on their sizes,are of great importance to the mechanical properties of the consolidated bulk materials.Therefore,it is necessary to reveal the re...The microstructure and microsegregation of atomized powder,which depend on their sizes,are of great importance to the mechanical properties of the consolidated bulk materials.Therefore,it is necessary to reveal the relationship between particle size and powder attributes.The effects of particle size on the so-lidification characterization of the atomized Ni-based superalloy powders were studied via finite element simulation.Based on the simulations,a model was developed to predict the microsegregation and mi-crostructure of atomized powders with different sizes and study the influence of thermal history on the powder attributes during the atomization processes.The radiation heat transfer and temperature gradi-ent within the rapid solidification alloy powders were taken into account in this model.For validating the accuracy of the model,the predictions of the present model were compared with the microsegregation and microstructure of the specific size powder close to the screen mesh size.The results showed that mi-crostructure depended primarily on the temperature gradient within the powder,while the solidification rate had a more significant effect on the microsegregation.The model predicted microstructure features in agreement with the experiment,and for microsegregation,the deviations of prediction for most ele-ments were less than 10%.This work provides a new model to precisely predict the microsegregation and microstructure of the atomized alloy powders and sets a foundation to control the powder features for various engineering applications.展开更多
基金supported by the National Natural Science Foundation of China(No.42005066)the Natural Science Foundation of Tianjin City(No.22JCQNJC01380)。
文摘An algorithm that can implement particle shape recognition and size measurement in hybrid particle field is proposed.Based on the defocused images obtained by the interferometric particle imaging(IPI)system,shape recognition of particles can be realized through Res Net50.Two-dimensional(2D)Fourier transform and 2D autocorrelation transform are used to obtain the size of spherical and non-spherical particles,respectively.The shape and size of the particle in hybrid particle field are determined.Numerical simulation and experiment results suggest that the method has good accuracy in measuring the particle size in hybrid particle field.
基金financially supported by the National Natural Science Foundation of China(Nos.51576016 and 51476012)
文摘In this study,the particle size-resolved distribution from a China-3 certificated light-duty diesel vehicle was measured by using a portable emission measurement system（PEMS）.In order to examine the influences of vehicle specific power（VSP） and high-altitude operation,measurements were conducted at 8 constant speeds,which ranged from 10 to 80 km/hr at10 km/hr intervals,and two different high altitudes,namely 2200 and 3200 m.The results demonstrated that the numbers of particles in all size ranges decreased significantly as VSP increased when the test vehicle was running at lower speeds（〈 20 km/hr）,while at a moderate speed（between 30 and 60 km/hr）,the particle number was statistically insensitive to increase VSP.Under high-speed cruising conditions,the numbers of ultrafine particles and PM2.5were insensitive to changes in VSP,but the numbers of nanoparticles and PM10 surged considerably.An increase in the operational altitude of the test vehicle resulted in increased particle number emissions at low and high driving speeds;however,particle numbers obtained at moderate speeds decreased as altitude rose.When the test vehicle was running at moderate speeds,particle numbers measured at the two altitudes were very close,except for comparatively higher number concentrations of nanoparticles measured at 2200 m.
基金financially supported by the National Natural Science Foundation of China(No.51376095)the Jiangsu Province Environmental Research Projects(No.2014049)
文摘Based on the laser diffraction and Shifrin transform,the measurement method of particle size distribution has been improved extensively.While in real measurements,some noise peaks exist in the inversion data and are easily to be misread as particle distribution peaks.The improved method used a truncation function as a filter is hard to distinguish adjacent peaks.Here,by introducing the bimodal resolution criterion,the filter function is optimized,and to a quasi truncation function with the optimized filter function is studied to achieve optimal bimodal resolution and to remove noise peaks.This new quasi truncation function fits multimode distribution very well.By combining the quasi truncation function with Shifrin transform,noise peaks are removed well and the adjacent peaks are distinguished clearly.Finally,laser diffraction experiments are conducted and the particle size distribution is analyzed by adoping the method.The results show that the quasi truncation function has better bimodal resolution than the truncation function.Generally,by combining the quasi truncation function with the Shifrin transform,in particle size distribution measurements with laser diffraction,the bimodal resolution is greatly increased and the noise is removed well.And the results can restore the original distribution perfectly.Therefore,the new method with combination of the quasi truncation function and the Shifrin transform provides a feasible and effective way to measure the multimode particle size distribution by laser diffraction.
基金"PSPC Régions n°2"("Projets Structurants des Pôles de Compétitivitéen région")funded by Conseil Régional Hauts-de-France and BPI.
文摘Developing the railway transport sector is a challenging scientific,economic and social research topic starting with ensuring human security.The main topic that should be developed in that sense is the ballast stability and dynamical behaviour under external loading and environmental changes.This paper investigates the effect of particle size distribution and normal pressure on the mechanical response of a ballast bed.Grading curves of ballast layers with different sizes are illustrated to discuss their strength behaviour under various strains to deduce the significant effect on the direct shear performance of the ballast layer.Direct shear tests with different Particle Size Distribution(PSD)were reproduced using the Discrete Element Method(DEM).It is noticed that when the number of small-sized ballast increases,the shear strength and the friction angle increase to varying degrees under different normal pressures,with an average increase of 27%and 8%,respectively.When the number of large-sized ballast decreases,the shear strength and the friction angle decrease to varying degrees under different normal pressures,with an average decrease of 6%and 3%,respectively.
基金supported by the Equipment Pre-research and Sharing Technology(41423030503)provided funding for this workThe Equipment Pre-research and Sharing Technology(41423030503)funded this work.
文摘This work used 5CrMnMo steel and titanium carbide(TiC)powders to fabricate particulate metal matrix composites(PMMCS).The composites’microstructure,hardness,and impact toughness were compared with four different titanium carbide ceramic particle sizes.The phase composition and microstructure of composites were studied.Vickers hardness and Charpy impact tests were employed to analyze composites’hardness and impact ductility,respectively.The results showed that the four groups of composites are mainly composed of martensite,trace residual austenite,and titanium carbide(undissolved TiC and primary TiC particles).With the growth of the ceramic particle dimension in the composite layer,the number of primary titanium carbide ceramics gradually decreased.When the initial ceramic particle size was small,it tended to generate dendritic primary TiC,and when the particle size was large,it tended to generate polygons and ellipsoids.Furthermore,with the growth of titanium carbide ceramic particle dimension in the composites,the hardness of the composites decreased but the impact toughness of the composites rose first and then descended.When the ceramic particle size was 50-75μm,the composite had the highest hardness,and the impact energy of the composites was the highest,which is 8 J.This was because there were more undissolved titanium carbide ceramics in the composite,and there was a thicker matrix metal between the ceramic particles.
基金support of the National Key Research and Development Program of China(2023YFD2100403)the Agricultural Science and Technology Innovation Program of Chinese Academy of Agricultural Sciences(CAAS-ASTIP-2021-OCRI)+3 种基金the Earmarked Fund for CARS-14the Innovation Group Project of Hubei Province(2023AFA042)the Key Research Projects of Hubei Province(2020BBA045)the Knowledge Innovation Program of Wuhan-Basic Research(3562).
文摘The increased risk of chronic diseases has led to increasing importance of coarse foods in daily life,but the inclusion of new ingredients has a great degree of influence on the structural characteristics and sensory qualities of the food.The effects of five different particle size variations on the physicochemical characteristics,dough,and steamed bread structure of Flaxseed-based milk coproduct(FMC)were investigated.As the particle size decreases,the structure of the dough becomes denser due to an increase in water retention capacity and dissolution capacity,weakening the competition for dough moisture and allowing for an increase in air-holding capacity.The reduction in particle size increased the specific volume of the steamed bread,a decrease in the spread ratio,and an optimization of hardness and elasticity,as well as an increase in consumer acceptance of the FMC steamed bread.However,it is not the smaller the particle size,the higher the quality of steamed bread,appropriate reduction of particle size can improve the quality of steamed bread.In addition,the addition of FMC reduces fat digestion.Therefore,the present study proposes a method to change the particle size of FMC to optimize the quality of the steamed bread and to reduce fat digestibility by adding FMC.
基金supported by the National Key Research and Development Program of China(2024YFC2909500)State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering(SDGZ2505)National Natural Science Foundation of China(42377148)。
文摘High-steep waste dumps in open-pit mines frequently demonstrate complex particle-size distributions and fractal characteristics along their slopes,which have a significant impact on slope stability.This study takes the Dasuji South waste dump in Inner Mongolia as a case to quantify the fractal dimensions of soil-rock mixtures at various slope heights,and to clarify how these fractal properties govern shear strength and deformation behavior under overlying stress,thereby affecting the overall stability of the waste dump slope.Field sampling and laboratory tests were conducted to determine the particle-size composition and fractal dimensions while direct shear tests were conducted and revealed that lower fractal dimensions indicating coarser particle assemblages significantly enhance shear resistance.Complementary PFC_(2)D discrete element simulations demonstrate that slopes composed of lower-fractaldimension materials deform less and contain localized deformation zones,whereas higher-fractal-dimension slopes experience more extensive displacement and a heightened risk of landslides.These findings refine our understanding of the relationship between fractal grain-size distribution and slope stability,providing a robust theoretical basis for improved stability assessment and optimized support strategies in deep open-pit mining waste dumps,and ultimately aiding in more effective disaster prevention within geotechnical engineering.
基金supported by the National Natural Science Foundation of China(No.91844000)China Postdoctoral Science Foundation(No.2020M670048).
文摘The acidity of atmospheric aerosols influences fundamental physicochemical processes that affect climate and human health.We recently developed a novel and facilewater-probebased method for directly measuring of the pH for micrometer-size droplets,providing a promising technique to better understand aerosol acidity in the atmosphere.The complex chemical composition of fine particles in the ambient air,however,poses certain challenges to using a water-probe for pH measurement,including interference from interactions between compositions and the influence of similar compositions on water structure.To explore the universality of our method,it was employed to measure the pH of ammonium,nitrate,carbonate,sulfate,and chloride particles.The pH of particles covering a broad range(0–14)were accurately determined,thereby demonstrating that our method can be generally applied,even to alkaline particles.Furthermore,a standard spectral library was developed by integrating the standard spectra of common hydrated ions extracted through the waterprobe.The library can be employed to identify particle composition and overcome the spectral overlap problem resulting from similar effects.Using the spectral library,all ions were identified and their concentrations were determined,in turn allowing successful pH measurement of multicomponent(ammonium-sulfate-nitrate-chloride)particles.Insights into the synergistic effect of Cl^(–),NO_(3)^(–),and NH_(4)^(+)depletion obtained with our approach revealed the interplay between pH and volatile partitioning.Given the ubiquity of component partitioning and pH variation in particles,the water probemay provide a new perspective on the underlying mechanisms of aerosol aging and aerosol–cloud interaction.
基金supported by the National Natural Science Foundation of China(No.42075182)。
文摘Low-cost sensors are widely used to collect high-spatial-resolution particulate matter data that traditional reference monitoring devices cannot.In addition to the mass concentration,the number concentration and size distribution are also fundamental in determining the origin and hazard level of particulate pollution.Therefore,low-cost optical sensors have been improved to establish optical particle sizers(OPSs).In this study,a low-cost OPS,the Nova SDS029,is introduced,and it is evaluated in comparison to two reference instruments—the GRIMM 11-D and the TSI 3330.We first tested the sizing accuracy using polystyrene latex spheres.Then,we assessed the mass and number size distribution accuracy in three application scenarios:indoor smoking,ambient air quality,and mobile monitoring.The evaluations suggest that the low-cost SDS029 rivals research-grade optical sizers in many aspects.For example,(1)the particle diameters obtained with the SDS029 are close to the reference instruments(usually<10%)in the 0.3-5μm range;(2)the number of particles and mass concentration are highly correlated(r≥0.99)with the values obtained with the reference instruments;and(3)the SDS029 slightly underestimates the number concentration,but the derived PM_(2.5)values are closer to monitoring station than the reference instruments.The successful application of the SDS029 in multiple scenarios suggests that a plausible particle size distribution can be obtained in an easy and cost-efficient way.We believe that low-cost OPSs will increasingly be used to map the sources and risk levels of particles at the city scale.
文摘This paper presents the basic principles of particle size measurement and latest industrial results recorded using an innovative optical instrumentation system designed to measure the size distribution of particles in a pneumatic suspension.The system is non-intrusive and cost-effective.A low-cost CCD camera is used to capture images of the particulate flow field,which is illuminated by a low-cost pulsed laser sheet generator.The particle size distribution is then determined by processing the particle images through the use of novel processing algorithms.Experimental results obtained in the past on a small scale particle flow test rig have demonstrated that the system is capable of measuring the size distribution of pneumatically conveyed particles with an accuracy of a few percent.For the present paper results obtained when testing the system at a 4 MW industrial test facility are presented.Comparisons are made with both off-line reference data achieved through sieving and on-line laser diffraction data recorded using an intrusive,extractive,Malvern Instruments system.In general there is good agreement between results when considering the characteristics and limitations of the individual methodologies.The novel imaging system shows itself to be rugged,practical and useful under genuine industrial conditions.
基金Basic Research Funds for Colleges and Universities directly under the Inner Mongolia Autonomous Region:Desert Ecosystem Protection and Restoration Innovation Team(BR 22-13-03).
文摘Wind erosion is a geomorphic process in arid and semi-arid areas and has substantial implications for regional climate and desertification.In the Columbia Plateau of northwestern United States,the emissions from fine particles of loessial soils often contribute to the exceedance of inhalable particulate matter(PM)with an aerodynamic diameter of 10μm or less(PM10)according to the air quality standards.However,little is known about the threshold friction velocity(TFV)for particles of different sizes that comprise these soils.In this study,soil samples of two representative soil types(Warden sandy loam and Ritzville silt loam)collected from the Columbia Plateau were sieved to seven particle size fractions,and an experiment was then conducted to determine the relationship between TFV and particle size fraction.The results revealed that soil particle size significantly affected the initiation of soil movement and TFV;TFV ranged 0.304-0.844 and 0.249-0.739 m/s for different particle size fractions of Ritzville silt loam and Warden sandy loam,respectively.PM10 and total suspended particulates(TSP)emissions from a bed of 63-90μm soil particles were markedly higher for Warden sandy loam than for Ritzville silt loam.Together with the lower TFV of Warden sandy loam,dust emissions from fine particles(<100μm in diameter)of Warden sandy loam thus may be a main contributor to dust in the region's atmosphere,since the PM10 emissions from the soil erosion surfaces and its ensuing suspension within the atmosphere constitute an essential process of soil erosion in the Columbia Plateau.Developing and implementing strategic land management practices on sandy loam soils is therefore necessary to control dust emissions in the Columbia Plateau.
基金jointly funded by the National Key R&D Program of China[grant numbers 2019YFC1510301 and 2018YFC1505702]the Basic Research Fund of the Chinese Academy of Meteorological Sciences[grant number 2020Z008].
文摘In recent years,the Cloud Imaging Probe(CIP)and Precipitation Imaging Probe(PIP)produced by Droplet Measurement Technologies(DMT)have been introduced by a number of meteorological research and operation centers in China.The supporting software provided by DMT,i.e.,PADS(Particle Analysis and Display System),cannot output detailed information on each individual particle,which definitely limits the in-depth utilization of cloud and precipitation particle image data in China.In this paper,particle-by-particle information was extracted by decompressing the CIP and PIP original particle image data,based on which a new definition of the dimension for nonspherical particles is proposed by using the area of the convex hull enclosing a particle to obtain the equivalent diameter of a circle with equal area.Based on the data detected during one flight in Inner Mongolia,the particle size distribution obtained using the new particle size definition and that used by the other four existing definitions are compared.The results show that the particle number concentration calculated using different particle size definitions can vary by up to an order of magnitude.The result obtained based on the new particle size definition is closest to that calculated with the area-equivalent diameter definition.
基金Funded by the National Natural Science Foundation of China(No.52172025)。
文摘The effects of high-volume slag-fly ash cement with different particle sizes on hydration degree,microstructure and mechanical properties were systematically studied,by means of laser particle size(DLS),X-ray diffraction (XRD),comprehensive thermal analysis (TG-DTA),scanning electron microscopy(SEM) and mechanical properties tests.The results show that suitable particle size distribution of cementitious material has significantly promoting effects on hydration reaction rate and mechanical properties.Compared with slag without further grinding,the slag after ball milling for 4 h has an obvious improvement in reactivity,which also provides a faster hydration rate and higher compressive strength for the cementitious material.When the slag milled for 1 and 4 h is mixed at a mass ratio of 2:1 (i e,slag with D_(50) of 7.4μm and average size of 9.9μm,and slag with D_(50) value of 2.6μm and average size of 5.3μm),and a certain amount of fly ash is added in,the most obvious improvement of compressive strength of cement is achieved.
基金supported by the National Natural Science Foundation of China (No.41875155)Natural Key Research and Development Program of China (No.2019YFA0607004)+1 种基金Environment and Conservation Fund/Woo Wheelock Green Fund (No.ECWW09EG04)Strategic Priority Research Program (B)of the Chinese Academy of Sciences (No.XDB05040502)。
文摘Fireworks(FW)could significantly worsen air quality in short term during celebrations.Due to similar tracers with biomass burning(BB),the fast and precise qualification of FW and BB is still challenging.In this study,online bulk and single-particle measurements were combined to investigate the contributions of FW and BB to the overall mass concentrations of PM_(2.5)and specific chemical species by positive matrix factorization(PMF)during the Chinese New Year in Hong Kong in February 2013.With combined information,fresh/aged FW(abundant ^(140)K_(2)NO_(3)^(+)and ^(213)K_(3)SO_(4)^(+)formed from ^(113)K_(2)Cl^(+)discharged by fresh FW)can be extracted from the fresh/aged BB sources,in addition to the Second Aerosol,Vehicles+Road Dust,and Sea Salt factors.The contributions of FW and BB were investigated during three high particle matter episodes influenced by the pollution transported from the Pearl River Delta region.The fresh BB/FW contributed 39.2%and 19.6%to PM_(2.5)during the Lunar Chinese New Year case.However,the contributions of aged FW/BB enhanced in the last two episodes due to the aging process,evidenced by high contributions from secondary aerosols.Generally,the fresh BB/FW showed more significant contributions to nitrate(35.1%and15.0%,respectively)compared with sulfate(25.1%and 5.9%,respectively)and OC(14.8%and11.1%,respectively)on average.In comparison,the aged FW contributed more to sulfate(13.4%).Overall,combining online bulk and single-particle measurement data can combine both instruments’advantages and provide a new perspective for applying source apportionment of aerosols using PMF.
基金The work described in this paper was partially supported by grants from the Research Grant Council of the Hong Kong Special Administrative Region,China(Project Nos.HKU 17207518 and R5037-18).
文摘The traditional standard wet sieving method uses steel sieves with aperture?0.063 mm and can only determine the particle size distribution(PSD)of gravel and sand in general soil.This paper extends the traditional method and presents an extended wet sieving method.The extended method uses both the steel sieves and the nylon filter cloth sieves.The apertures of the cloth sieves are smaller than 0.063 mm and equal 0.048 mm,0.038 mm,0.014 mm,0.012 mm,0.0063 mm,0.004 mm,0.003 mm,0.002 mm,and 0.001 mm,respectively.The extended method uses five steps to separate the general soil into many material sub-groups of gravel,sand,silt and clay with known particle size ranges.The complete PSD of the general soil is then calculated from the dry masses of the individual material sub-groups.The extended method is demonstrated with a general soil of completely decomposed granite(CDG)in Hong Kong,China.The silt and clay materials with different particle size ranges are further examined,checked and verified using stereomicroscopic observation,physical and chemical property tests.The results further confirm the correctness of the extended wet sieving method.
基金This research was supported by the project"Research on Vegetation Restoration and Reconstruction Technology in the Ecologically Fragile Areas of Uzhumqin Sand Dunes"of the Science and Technology Program of Inner Mongolia Autonomous Region(2020GG0077).We are grateful to the Key Laboratory of Wind and Sand Physics and Sand Control Engineering of Inner Mongolia Autonomous Region for providing us with experimental equipment and space.We thank LetPub(www.letpub.com)for its linguistic assistance during the preparation of this manuscript.
文摘Sediment constitutes the fundamental basis for forming and evolving aeolian geomorphology.The characteristics of sediment particle size offer insights into the development and evolution of sandy terrain,making their study critical to understanding aeolian geomorphology and sand control.In this study,we combined high-density collection of surface sediments in the Uzhumqin sand dunes and GIS spatial analysis to analyze the particle size parameters and changes in the spatial distribution of surface sediments in this region.In addition,we used an end-member analysis to identify the potential sources of the sediments.The results showed that surface sediments in the Uzhumqin sand dunes had distinct spatial distributions.Medium and coarse grain sands dominated the sediments in the dunes,and the mean grain size and the sorting coefficient generally increased along the prevailing wind direction,with high values in individual areas related to factors such as material sources and vegetation cover.Skewness was strongly influenced by factors such as landform change and human activity,and spatial variability became more complex.Kurtosis and the soil fractal dimension showed generally decreasing trends along the prevailing wind direction.With dune fixation,the contents of clay and powder particles in the soil increased;the mean particle size,the sorting coefficient,and the fractal dimension of the soil gradually increased,and the skewness and kurtosis gradually decreased.The end-member analysis results indicated the existence of five end-members(EM)in the dune sediments.EM 1 was a mixed component of wind-deposited fine sands and nearby fluvial sediments.EM 2 was the main component of sediments in the study area and was the result of sorting lake sediments by wind action and by the local topography.EM 3 may be a product of river flood deposition.EM 4 and EM 5 had coarser grain sizes.EM 4 was a lake-phase sediment product influenced by topographic and vegetation cover factors,and EM 5 was primarily a river and lake sediment product modified by weathering.The sediment particle size results from the study area indicate that the sediment in the sandy region is generally coarse due to multiple factors,including topography,climate,hydrology,and human activity.Sandy material in the study area originated from nearby,with very little sand being transported from long distances.
基金the National Natural Science Foundation of China (Grant No.22105184)Research Fund of SWUST for PhD (Grant No.22zx7175)+1 种基金Sichuan Science and Technology Program (Grant No.2019ZDZX0013)Institute of Chemical Materials Program (Grant No.SXK-2022-03)for financial support。
文摘High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality consistency,equipment miniaturization,and minimum manpower is an inevitable requirement to adapt to the current social technology development trend.Here reported is the microfluidic preparation of u-DAAF with tunable particle size by a passive swirling microreactor.Under the guidance of recrystallization growth kinetics and mixing behavior of fluids in the swirling microreactor,the key parameters(liquid flow rate,explosive concentration and crystallization temperature)were screened and optimized through screening experiments.Under the condition that no surfactant is added and only experimental parameters are controlled,the particle size of recrystallized DAAF can be adjusted from 98 nm to 785 nm,and the corresponding specific surface area is 8.45 m^(2)·g^(-1)to 1.33 m^(2)·g^(-1).In addition,the preparation method has good batch stability,high yield(90.8%-92.6%)and high purity(99.0%-99.4%),indicating a high practical application potential.Electric explosion derived flyer initiation tests demonstrate that the u-DAAF shows an initiation sensitivity much lower than that of the raw DAAF,and comparable to that of the refined DAAF by conventional spraying crystallization method.This study provides an efficient method to fabricate u-DAAF with narrow particle size distribution and high reproducibility as well as a theoretical reference for fabrication of other ultrafine explosives.
基金The National Key Research and Development Program(2020YFA0906804)the National Natural Science Foundation of China(22078325,22035007,91934301)+1 种基金the NSFC-EU project(31961133018)the Special Project of Strategic Leading Science and Technology,CAS(XDC06010302)are gratefully acknowledged.
文摘The particle size distribution of polymer always develops in emulsion polymerization systems,and certain key phenomena/mechanisms as well as properties of the final product are significantly affected by this distribution.This review mainly focuses on the measurement methods of particle size distribution rather than average particle size during the emulsion polymerization process,including the existing off-line,on-line,and in-line measurement methods.Moreover,the principle,resolution,performance,advantages,and drawbacks of various methods for evaluating particle size distribution are contrasted and illustrated.Besides,several possible development directions or solutions of the in-line measurement technology are explored.
基金The financial support from the National Pork Board,Des Moines,IA,USA,is greatly appreciated。
文摘Background Reduction of the particle size of corn increases energy digestibility and concentrations of digestible and metabolizable energy.Pelleting may also reduce particle size of grain,but it is not known if there are interactions between particle size reduction and pelleting.The objective of this experiment was to test the hypothesis that particle size reduction and pelleting,separately or in combination,increase N balance,apparent total tract digestibility(ATTD)of fiber and fat,and net energy(NE)in corn-soybean meal diets fed to group-housed pigs.Methods Six corn-soybean meal-based diets were used in a 3×2 factorial design with 3 particle sizes of corn(i.e.,700,500,or 300μm)and 2 diet forms(i.e.,meal or pelleted).Pigs were allowed ad libitum access to feed and water.Twenty-four castrated male pigs(initial weight:29.52 kg;standard diviation:1.40)were allotted to the 6 diets using a 6×6 Latin square design with 6 calorimeter chambers(i.e.,4 pigs/chamber)and 6 periods.Oxygen consumption and CO_(2)and CH_(4)productions were measured during fed and fasting states and fecal and urine samples were collected.Results Regardless of particle size of corn,the ATTD of gross energy(GE),N,and acid-hydrolyzed ether extract(AEE),and the concentration of NE were greater(P<0.05)in pelleted diets than in meal diets.Regardless of diet form,the ATTD of GE,N,and AEE,and the concentration of NE were increased(linear;P<0.05)by reducing the particle size of corn,but the increase was greater in meal diets than in pelleted diets(interaction;P<0.05).Conclusions Both pelleting and reduction of corn particle size increased nutrient digestibility and NE,but increases were greater in meal diets than in pelleted diets.
基金support of this work by the National Science and Technology Major Project(No.2017-Ⅵ-0008-0078)the National Key Research and Development Program of China(No.2022YFB3803802)the National Natural Science Foundation of China(No.U1560106).
文摘The microstructure and microsegregation of atomized powder,which depend on their sizes,are of great importance to the mechanical properties of the consolidated bulk materials.Therefore,it is necessary to reveal the relationship between particle size and powder attributes.The effects of particle size on the so-lidification characterization of the atomized Ni-based superalloy powders were studied via finite element simulation.Based on the simulations,a model was developed to predict the microsegregation and mi-crostructure of atomized powders with different sizes and study the influence of thermal history on the powder attributes during the atomization processes.The radiation heat transfer and temperature gradi-ent within the rapid solidification alloy powders were taken into account in this model.For validating the accuracy of the model,the predictions of the present model were compared with the microsegregation and microstructure of the specific size powder close to the screen mesh size.The results showed that mi-crostructure depended primarily on the temperature gradient within the powder,while the solidification rate had a more significant effect on the microsegregation.The model predicted microstructure features in agreement with the experiment,and for microsegregation,the deviations of prediction for most ele-ments were less than 10%.This work provides a new model to precisely predict the microsegregation and microstructure of the atomized alloy powders and sets a foundation to control the powder features for various engineering applications.
