The dramatic rise in the number of people living in cities has made many environmental and social problems worse.The search for a productive method for disposing of solid waste is the most notable of these problems.Ma...The dramatic rise in the number of people living in cities has made many environmental and social problems worse.The search for a productive method for disposing of solid waste is the most notable of these problems.Many scholars have referred to it as a fuzzy multi-attribute or multi-criteria decision-making problem using various fuzzy set-like approaches because of the inclusion of criteria and anticipated ambiguity.The goal of the current study is to use an innovative methodology to address the expected uncertainties in the problem of solid waste site selection.The characteristics(or sub-attributes)that decision-makers select and the degree of approximation they accept for various options can both be indicators of these uncertainties.To tackle these problems,a novel mathematical structure known as the fuzzy parameterized possibility single valued neutrosophic hypersoft expert set(ρˆ-set),which is initially described,is integrated with a modified version of Sanchez’s method.Following this,an intelligent algorithm is suggested.The steps of the suggested algorithm are explained with an example that explains itself.The compatibility of solid waste management sites and systems is discussed,and rankings are established along with detailed justifications for their viability.This study’s strengths lie in its application of fuzzy parameterization and possibility grading to effectively handle the uncertainties embodied in the parameters’nature and alternative approximations,respectively.It uses specific mathematical formulations to compute the fuzzy parameterized degrees and possibility grades that are missing from the prior literature.It is simpler for the decisionmakers to look at each option separately because the decision is uncertain.Comparing the computed results,it is discovered that they are consistent and dependable because of their preferred properties.展开更多
Hepatocellular carcinoma presents with three distinct immune phenotypes,including immune-desert,immune-excluded,and immune-inflamed,indicating various treatment responses and prognostic outcomes.The clinical applicati...Hepatocellular carcinoma presents with three distinct immune phenotypes,including immune-desert,immune-excluded,and immune-inflamed,indicating various treatment responses and prognostic outcomes.The clinical application of multi-omics parameters is still restricted by the expensive and less accessible assays,although they accurately reflect immune status.A comprehensive evaluation framework based on“easy-to-obtain”multi-model clinical parameters is urgently required,incorporating clinical features to establish baseline patient profiles and disease staging;routine blood tests assessing systemic metabolic and functional status;immune cell subsets quantifying subcluster dynamics;imaging features delineating tumor morphology,spatial configuration,and perilesional anatomical relationships;immunohistochemical markers positioning qualitative and quantitative detection of tumor antigens from the cellular and molecular level.This integrated phenomic approach aims to improve prognostic stratification and clinical decision-making in hepatocellular carcinoma management conveniently and practically.展开更多
Electrochemical models,characterized by high fidelity and physical interpretability,have been applied in var-ious fields such as fast charging,battery state estimation,and battery material design.Currently,widely util...Electrochemical models,characterized by high fidelity and physical interpretability,have been applied in var-ious fields such as fast charging,battery state estimation,and battery material design.Currently,widely utilized single particle-based model exhibits high computational efficiency but suffers from low simulation accuracy under high-rate charge/discharge conditions.In this work,an electrochemical model for lithium-ion batteries based on multi-particle hypothesis is developed.Two particles are employed to represent the electrode char-acteristics of the positive and negative electrodes,respectively.Through theoretical derivation,mathematical equations are established to describe various processes within the battery,including solid-phase diffusion,li-quidphase diffusion,reaction polarization,and ohmic polarization.In addition,a method for obtaining model parameters is proposed.Finally,the model is experimentally validated by using lithium iron phosphate and nickel-cobalt-manganese lithium-ion batteries under constant current conditions.The identified battery elec-trochemical model parameters are within reasonable accuracy as evidenced by the experimental validation results.展开更多
Presented in this study is a novel method for estimating the depth of single underwater source in shallow water,utilizing vector sensors.The approach leverages the depth distribution of the broadband Stokes parameters...Presented in this study is a novel method for estimating the depth of single underwater source in shallow water,utilizing vector sensors.The approach leverages the depth distribution of the broadband Stokes parameters to estimate source depth accurately.Unlike traditional matched field processing(MFP)and matched mode processing(MMP),the proposed approach can estimate source depth directly from the data received by sensors without requiring complete environmental information.Firstly,the broadband Stokes parameters(BSP)are established using the normal mode theory.Then the nonstationary phase approximation is used to simplify the theoretical derivation,which is necessary when dealing with broadband integrals.Additionally,range terms of the BSP are eliminated by normalization.By analyzing the depth distribution of the normalized broadband Stokes parameters(NBSP),it is found that the NBSP exhibit extreme values at the source depth,which can be used for source depth estimation.So the proposed depth estimation method is based on searching the peaks of the NBSP.Simulations show that this method is effective in relatively simple shallow water environments.Finally,the effect of source range,frequency bandwidth,sound speed profile(SSP),water depth,and signal-to-noise ratio(SNR)are studied.The findings indicate that the proposed method can accurately estimate the source depth when the SNR is greater than-5 d B and does not need to consider model mismatch issues.Additionally,variations in environmental parameters have minimal impact on estimation accuracy.Compared to MFP,the proposed method requires a higher SNR,but demonstrates superior robustness against fluctuations in environmental parameters.展开更多
As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalen...As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).展开更多
(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbi...(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.展开更多
The S38C railway axle undergoes induction hardening,resulting in a gradient-distributed microstructure and mechanical properties.The accurate identification of gradient-distributed plastic parameters for the S38C axle...The S38C railway axle undergoes induction hardening,resulting in a gradient-distributed microstructure and mechanical properties.The accurate identification of gradient-distributed plastic parameters for the S38C axle remains a challenging task.To tackle this challenge,the present study proposes a novel approach for identifying the gradient-distributed plastic parameters for the S38C axle by integrating nano-indentation techniques with the machine learning method.Firstly,nano-indentation tests are conducted along the radial direction of the S38C axle to obtain the gradient-distributed load-displacement curves,nano-hardness,and elastic modulus.Subsequently,the dimensionless analysis is performed to obtain the representative stress,strain,and yield stress from load-displacement curves.These parameters are then incorporated into the machine learning method as physical information to identify the gradient-distributed plastic parameters of the S38C axle.The results indicate that the proposed method based on the physics-informed neural network and multi-fidelity neural network successfully identifies the gradient-distributed plastic parameters of the S38C axles and demonstrates superior prediction accuracy and generalization compared with the purely data-driven machine learning method.展开更多
The shale gas development in China faces challenges such as complex reservoir conditions and high development costs.Based on the pore pressure and geostress coupling theory,this paper studies the geostress evolution l...The shale gas development in China faces challenges such as complex reservoir conditions and high development costs.Based on the pore pressure and geostress coupling theory,this paper studies the geostress evolution laws and fracture network characteristics of shale gas infill wells.A mechanism model of CN platform logging data and geomechanical parameters is established to simulate the influence of parent well’s production on the geostress in the infill well area.It is suggested that with the increase of production time,normal fault stress state and horizontal stress deflection will occur.The smaller the parent well spacing and the longer the production time,the earlier the normal fault stress state appears and the larger the range.Based on the model,the fracture network morphology and construction parameters of infill wells are optimized.parentparentparentparent The results indicate that:1:A well spacing of 500 m achieves a Pareto optimum between“full reserve coverage”and“stress barrier”;2:A parent well recovery degree of 30%corresponds to the critical point of stress reversal,where the lateral deflection rate of the infill fracture is less than 8%and the SRV loss is minimized;3:6-cluster intensive completion with twice the liquid intensity increases the fracture complexity index by 1.7 times,enhances well group EUR by 15.4%,and reduces single-well cost by 22%.This research fills the theoretical gap in the collaborative optimization of“multi-parameter,multi-objective and multi-constraint”and provide parameter optimization basis for shale gas infill well development in China and help to improve the development efficiency and economic benefits.展开更多
Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introdu...Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.展开更多
Load frequency control(LFC)is a critical function to balance the power consumption and generation.Thegrid frequency is a crucial indicator for maintaining balance.However,the widely used information and communication ...Load frequency control(LFC)is a critical function to balance the power consumption and generation.Thegrid frequency is a crucial indicator for maintaining balance.However,the widely used information and communication infrastructure for LFC increases the risk of being attacked by malicious actors.The dynamic load altering attack(DLAA)is a typical attack that can destabilize the power system,causing the grid frequency to deviate fromits nominal value.Therefore,in this paper,we mathematically analyze the impact of DLAA on the stability of the grid frequency and propose the network parameter regulation(NPR)to mitigate the impact.To begin with,the dynamic LFC model is constructed by highlighting the importance of the network parameter.Then,we model the DLAA and analyze its impact on LFC using the theory of second-order dynamic systems.Finally,we model the NPR and prove its effect in mitigating the DLAA.Besides,we construct a least-effort NPR considering its infrastructure cost and aim to reduce the operation cost.Finally,we carry out extensive simulations to demonstrate the impact of the DLAA and evaluate the mitigation performance of NPR.The proposed cost-benefit NPR approach can not only mitigate the impact of DLAA with 100%and also save 41.18$/MWh in terms of the operation cost.展开更多
Laser-assisted drilling combined with full-size polycrystalline diamond compact(PDC)bit is considered a feasible solution to enhance the drilling performance of engineering machinery.In this method,determining the opt...Laser-assisted drilling combined with full-size polycrystalline diamond compact(PDC)bit is considered a feasible solution to enhance the drilling performance of engineering machinery.In this method,determining the optimal collaborative control parameters that support rapid drilling is crucial for improving the combined performance.This study used average drilling speed,average torque,and total specificenergy for quantitative analysis to characterize the efficiencyand economy of combined rock breaking.Given the advantage of the response surface methodology in providing high-precision predictions with limited experimental data,regression models of the average drilling speed,average torque,and total specificenergy were established.The results showed that as the laser power and irradiation time increased,the average drilling speed firstincreased rapidly and then leveled off,while the average torque decreased sharply before decelerating.The total specificenergy initially decreased and then increased,with the combined drilling outperforming conventional mechanical drilling within specific parameter ranges.As the weight on bit increased,both the average torque and total specificenergy first decreased and then increased.With rising rotating speed,the average torque exhibited a trend of initial increase,then decrease,and finalincrease,whereas the total specificenergy increased slowly at firstand then sharply.Both parameters exhibited optimal values at which the average torque and total specific energy remained at minimal levels.For granite combined drilling,the optimal performance was achieved at a laser power of 3000 W,irradiation time of 31 s,the weight on bit of 2.4 kN,and the rotating speed of 97 r/min.展开更多
Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.W...Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.展开更多
The internal flow fields within a three-dimensional inward-tunning combined inlet are extremely complex,especially during the engine mode transition,where the tunnel changes may impact the flow fields significantly.To...The internal flow fields within a three-dimensional inward-tunning combined inlet are extremely complex,especially during the engine mode transition,where the tunnel changes may impact the flow fields significantly.To develop an efficient flow field reconstruction model for this,we present an Improved Conditional Denoising Diffusion Generative Adversarial Network(ICDDGAN),which integrates Conditional Denoising Diffusion Probabilistic Models(CDDPMs)with Style GAN,and introduce a reconstruction discrimination mechanism and dynamic loss weight learning strategy.We establish the Mach number flow field dataset by numerical simulation at various backpressures for the mode transition process from turbine mode to ejector ramjet mode at Mach number 2.5.The proposed ICDDGAN model,given only sparse parameter information,can rapidly generate high-quality Mach number flow fields without a large number of samples for training.The results show that ICDDGAN is superior to CDDGAN in terms of training convergence and stability.Moreover,the interpolation and extrapolation test results during backpressure conditions show that ICDDGAN can accurately and quickly reconstruct Mach number fields at various tunnel slice shapes,with a Structural Similarity Index Measure(SSIM)of over 0.96 and a Mean-Square Error(MSE)of 0.035%to actual flow fields,reducing time costs by 7-8 orders of magnitude compared to Computational Fluid Dynamics(CFD)calculations.This can provide an efficient means for rapid computation of complex flow fields.展开更多
Hypersoft set is an extension of soft set as it further partitions each attribute into its corresponding attribute-valued set.This structure is more flexible and useful as it addresses the limitation of soft set for d...Hypersoft set is an extension of soft set as it further partitions each attribute into its corresponding attribute-valued set.This structure is more flexible and useful as it addresses the limitation of soft set for dealing with the scenarios having disjoint attribute-valued sets corresponding to distinct attributes.The main purpose of this study is to make the existing literature regarding neutrosophic parameterized soft set in line with the need of multi-attribute approximate function.Firstly,we conceptualize the neutrosophic parameterized hypersoft sets under the settings of fuzzy set,intuitionistic fuzzy set and neutrosophic set along with some of their elementary properties and set theoretic operations.Secondly,we propose decision-making-based algorithms with the help of these theories.Moreover,illustrative examples are presented which depict the structural validity for successful application to the problems involving vagueness and uncertainties.Lastly,the generalization of the proposed structure is discussed.展开更多
The complex nature of laser-material interaction causes non-stoichiometric ablation of alloy samples.This is attributed to matrix effect, which reduces analyzing capability. To address this issue, the analytical perfo...The complex nature of laser-material interaction causes non-stoichiometric ablation of alloy samples.This is attributed to matrix effect, which reduces analyzing capability. To address this issue, the analytical performance of three different normalization methods, namely normalization with background, internal normalization and three point smoothing techniques at different parameter settings is studied for quantification of Ag and Zn by Laser induced breakdown spectroscopy(LIBS).The LIBS spectra of five known concentration of silver zinc binary composites have been investigated at various laser irradiances(LIs). Calibration curves for both Ag(I) line(4d^(10)5s^2S_(1/2)→4d^(10)5p^2P_(1/2) at 338.28 nm) and Zn(I) line(4s5s^3S_1→4s4p^3P_2 at 481.053 nm) have been determined at LI of 5.86?×?10^(10)W cm^(-2). Slopes of these calibration curves provide the valuation of matrix effect in the Ag–Zn composites. With careful sample preparation and normalization after smoothing at optimum parameter setting(OPS), the minimization of sample matrix effect has been successfully achieved. A good linearity has been obtained in Ag and Zn calibration curve at OPS when normalized the whole area of spectrum after smoothing and the obtained coefficients of determination values were R^2?=?0.995 and 0.998 closer to 1. The results of matrix effect have been further verified by analysis of plasma parameters. Both plasma parameters showed no change with varying concentration at OPS. However, at high concentration of Ag, the observed significant changes in both plasma parameters at common parameter setting PS-1 and PS-2 were the gesture of matrix effect. In our case, the better analytical results were obtained at smoothing function with optimized parameter setting that indicates it is more efficient than normalization with background and internal normalization method.展开更多
A new mothod was presented to find the optimal location and parameter setting of Thyristor Controlled Series Compensator (TCSC) to maxmize the transfer capability.Firstly the sensitivity of the transfer capability wit...A new mothod was presented to find the optimal location and parameter setting of Thyristor Controlled Series Compensator (TCSC) to maxmize the transfer capability.Firstly the sensitivity of the transfer capability with respect was described to the line's reactance was described to find the more sensitive lines for installing TCSC,however,the line which has the most sesitivity value is always not the best line for installing TCSC.For solving this problem,the more sensitive m lines were selected as the alternative line group of installing TCSC,and then modified particle swarm optimization (MPSO) was used to find out the optimal location and the optimal parameter settings of TCSC.Particle swarm optimization (PSO) algorithm can results premature convergence.For solving this problem,population entropy and cellular automata were introduced to it.Simulation results of IEEE 30-bus system proved the effectiveness of the method and its application values.展开更多
The setting of attention parameters plays a role in the performance of synergetic neural network based on PFAP model. This paper first analyzes the attention parameter setting algorithm based on award-penalty learning...The setting of attention parameters plays a role in the performance of synergetic neural network based on PFAP model. This paper first analyzes the attention parameter setting algorithm based on award-penalty learning mechanism. Then, it presents an improved algorithm to overcome its drawbacks. The experimental results demonstrate that the novel algorithm is better than the original one under the same circumstances.展开更多
Medical ultrasound contrast imaging is a powerful modality undergoing successive developments in the last decade to date Lately, pulse inversion has been used in both ultrasound tissue harmonic and contrast imaging. H...Medical ultrasound contrast imaging is a powerful modality undergoing successive developments in the last decade to date Lately, pulse inversion has been used in both ultrasound tissue harmonic and contrast imaging. However, there was a tradeoff between resolution and penetration. Chirp excitations partially solved the tradeoff, but the chirp setting parameters were not optimized. The present work proposes for the first time combining chirp inversion with ultrasound contrast imaging, with the motivation to improve the contrast, by automatically optimizing the setting parameters of chirp excitation, it is thus an optimal command problem. Linear chirps, 5 μm diameter microbubbles and gradient ascent algorithm were simulated to optimize the chirp setting parameters. Simulations exhibited a gain of 5 dB by automatic optimization of chirp inversion relative to pulse inversion. The automatic optimization process was quite fast. Combining chirp inversion with ultrasound contrast imaging led to a maximum backscattered power permitting high contrast outcomes and optimum parameters.展开更多
For impulse radio ultra-wideband (IR-UWB) ranging systems,effects of the settings of transmitter-related parameters, which include the pulse shape, the bandwidth and the pulse repetition interval (PRI), on ranging acc...For impulse radio ultra-wideband (IR-UWB) ranging systems,effects of the settings of transmitter-related parameters, which include the pulse shape, the bandwidth and the pulse repetition interval (PRI), on ranging accuracy were studied through theoretical analysis and simulations. Both the match-filtering based coherent TOA estimation algorithm and the energy-detection based non-coherent algorithm were used during simulations. Results show that the pulse shape has the least effect on the ranging accuracy. Increasing the pulse bandwidth can improve the ranging performance, but the performance is hardly improved any more when the bandwidth is increased beyond a certain level. PRI should be set long enough to guarantee the accurate ranging, because when PRI is shorter than the maximum excess delay of the channel, the ranging accuracy will be deteriorated by inter-pulse interference.展开更多
General surgery hernia is a common and frequently- occurring disease in the world. In the tension-free hernia repair surgery, polypropylene （PP） patch has been confirmed as the most popular surgical implants. In thi...General surgery hernia is a common and frequently- occurring disease in the world. In the tension-free hernia repair surgery, polypropylene （PP） patch has been confirmed as the most popular surgical implants. In this study, domestic medical PP monofilament was selected as raw material whose diameter was 0.15 mm, and the patch was knitted in the warp knitting machine of 12E gauge with one bar. Using the method of orthogonal experiment with three factors and three levels, the best heat-setting process of PP mesh was determined at the temperature of 130 ~C with 10 min under tension-free conditions. The relationship between heat-setting tension and performance of the patch was discussed. Patches with different porosity were prepared, and then structural parameters including density, thickness, porosity, and mechanical properties including tensile breaking strength, bursting strength, tearing strength, flexural rigidity and suture pulling out strength were tested and compared. The experimental results show that： the smaller of the patch＇s density, the higher of the porosity; other properties including density, thickness, bending stiffness, tensile breaking strength, bursting strength, tear strength, and suture pulling out strength reduce in varying degrees. This different degree of reduction is worth summarizing.展开更多
文摘The dramatic rise in the number of people living in cities has made many environmental and social problems worse.The search for a productive method for disposing of solid waste is the most notable of these problems.Many scholars have referred to it as a fuzzy multi-attribute or multi-criteria decision-making problem using various fuzzy set-like approaches because of the inclusion of criteria and anticipated ambiguity.The goal of the current study is to use an innovative methodology to address the expected uncertainties in the problem of solid waste site selection.The characteristics(or sub-attributes)that decision-makers select and the degree of approximation they accept for various options can both be indicators of these uncertainties.To tackle these problems,a novel mathematical structure known as the fuzzy parameterized possibility single valued neutrosophic hypersoft expert set(ρˆ-set),which is initially described,is integrated with a modified version of Sanchez’s method.Following this,an intelligent algorithm is suggested.The steps of the suggested algorithm are explained with an example that explains itself.The compatibility of solid waste management sites and systems is discussed,and rankings are established along with detailed justifications for their viability.This study’s strengths lie in its application of fuzzy parameterization and possibility grading to effectively handle the uncertainties embodied in the parameters’nature and alternative approximations,respectively.It uses specific mathematical formulations to compute the fuzzy parameterized degrees and possibility grades that are missing from the prior literature.It is simpler for the decisionmakers to look at each option separately because the decision is uncertain.Comparing the computed results,it is discovered that they are consistent and dependable because of their preferred properties.
文摘Hepatocellular carcinoma presents with three distinct immune phenotypes,including immune-desert,immune-excluded,and immune-inflamed,indicating various treatment responses and prognostic outcomes.The clinical application of multi-omics parameters is still restricted by the expensive and less accessible assays,although they accurately reflect immune status.A comprehensive evaluation framework based on“easy-to-obtain”multi-model clinical parameters is urgently required,incorporating clinical features to establish baseline patient profiles and disease staging;routine blood tests assessing systemic metabolic and functional status;immune cell subsets quantifying subcluster dynamics;imaging features delineating tumor morphology,spatial configuration,and perilesional anatomical relationships;immunohistochemical markers positioning qualitative and quantitative detection of tumor antigens from the cellular and molecular level.This integrated phenomic approach aims to improve prognostic stratification and clinical decision-making in hepatocellular carcinoma management conveniently and practically.
基金Supported by the National Natural Science Foundation of China(Grant Nos.52407238,52177210)the Youth Foundation of Shandong Provincial Natural Science Foundation(Grant No.ZR2023QE036).
文摘Electrochemical models,characterized by high fidelity and physical interpretability,have been applied in var-ious fields such as fast charging,battery state estimation,and battery material design.Currently,widely utilized single particle-based model exhibits high computational efficiency but suffers from low simulation accuracy under high-rate charge/discharge conditions.In this work,an electrochemical model for lithium-ion batteries based on multi-particle hypothesis is developed.Two particles are employed to represent the electrode char-acteristics of the positive and negative electrodes,respectively.Through theoretical derivation,mathematical equations are established to describe various processes within the battery,including solid-phase diffusion,li-quidphase diffusion,reaction polarization,and ohmic polarization.In addition,a method for obtaining model parameters is proposed.Finally,the model is experimentally validated by using lithium iron phosphate and nickel-cobalt-manganese lithium-ion batteries under constant current conditions.The identified battery elec-trochemical model parameters are within reasonable accuracy as evidenced by the experimental validation results.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12274348 and 12004335)the National Key Research and Development Program of China(Grant No.2024YFC2813800)。
文摘Presented in this study is a novel method for estimating the depth of single underwater source in shallow water,utilizing vector sensors.The approach leverages the depth distribution of the broadband Stokes parameters to estimate source depth accurately.Unlike traditional matched field processing(MFP)and matched mode processing(MMP),the proposed approach can estimate source depth directly from the data received by sensors without requiring complete environmental information.Firstly,the broadband Stokes parameters(BSP)are established using the normal mode theory.Then the nonstationary phase approximation is used to simplify the theoretical derivation,which is necessary when dealing with broadband integrals.Additionally,range terms of the BSP are eliminated by normalization.By analyzing the depth distribution of the normalized broadband Stokes parameters(NBSP),it is found that the NBSP exhibit extreme values at the source depth,which can be used for source depth estimation.So the proposed depth estimation method is based on searching the peaks of the NBSP.Simulations show that this method is effective in relatively simple shallow water environments.Finally,the effect of source range,frequency bandwidth,sound speed profile(SSP),water depth,and signal-to-noise ratio(SNR)are studied.The findings indicate that the proposed method can accurately estimate the source depth when the SNR is greater than-5 d B and does not need to consider model mismatch issues.Additionally,variations in environmental parameters have minimal impact on estimation accuracy.Compared to MFP,the proposed method requires a higher SNR,but demonstrates superior robustness against fluctuations in environmental parameters.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272393 and 52130905).
文摘As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).
基金supported in part by the National Key Research and Development Program of China(2021YFB2900501)in part by the Shaanxi Science and Technology Innovation Team(2023-CX-TD-03)+3 种基金in part by the Science and Technology Program of Shaanxi Province(2021GXLH-Z-038)in part by the Natural Science Foundation of Hunan Province(2023JJ40607 and 2023JJ50045)in part by the Scientific Research Foundation of Hunan Provincial Education Department(23B0713 and 24B0603)in part by the National Natural Science Foundation of China(62401371,62101275,and 62372070).
文摘(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.
基金supported by the National Key Research and Development Plan(Grant No.2022YFB3401901)the National Natural Science Foundation of China(Grant Nos.12192210,12192214,12072295,and 12222209)+1 种基金Independent Project of State Key Laboratory of Rail Transit Vehicle System(Grant No.2023TPL-T03)Fundamental Research Funds for the Central Universities(Grant No.2682023CG004).
文摘The S38C railway axle undergoes induction hardening,resulting in a gradient-distributed microstructure and mechanical properties.The accurate identification of gradient-distributed plastic parameters for the S38C axle remains a challenging task.To tackle this challenge,the present study proposes a novel approach for identifying the gradient-distributed plastic parameters for the S38C axle by integrating nano-indentation techniques with the machine learning method.Firstly,nano-indentation tests are conducted along the radial direction of the S38C axle to obtain the gradient-distributed load-displacement curves,nano-hardness,and elastic modulus.Subsequently,the dimensionless analysis is performed to obtain the representative stress,strain,and yield stress from load-displacement curves.These parameters are then incorporated into the machine learning method as physical information to identify the gradient-distributed plastic parameters of the S38C axle.The results indicate that the proposed method based on the physics-informed neural network and multi-fidelity neural network successfully identifies the gradient-distributed plastic parameters of the S38C axles and demonstrates superior prediction accuracy and generalization compared with the purely data-driven machine learning method.
文摘The shale gas development in China faces challenges such as complex reservoir conditions and high development costs.Based on the pore pressure and geostress coupling theory,this paper studies the geostress evolution laws and fracture network characteristics of shale gas infill wells.A mechanism model of CN platform logging data and geomechanical parameters is established to simulate the influence of parent well’s production on the geostress in the infill well area.It is suggested that with the increase of production time,normal fault stress state and horizontal stress deflection will occur.The smaller the parent well spacing and the longer the production time,the earlier the normal fault stress state appears and the larger the range.Based on the model,the fracture network morphology and construction parameters of infill wells are optimized.parentparentparentparent The results indicate that:1:A well spacing of 500 m achieves a Pareto optimum between“full reserve coverage”and“stress barrier”;2:A parent well recovery degree of 30%corresponds to the critical point of stress reversal,where the lateral deflection rate of the infill fracture is less than 8%and the SRV loss is minimized;3:6-cluster intensive completion with twice the liquid intensity increases the fracture complexity index by 1.7 times,enhances well group EUR by 15.4%,and reduces single-well cost by 22%.This research fills the theoretical gap in the collaborative optimization of“multi-parameter,multi-objective and multi-constraint”and provide parameter optimization basis for shale gas infill well development in China and help to improve the development efficiency and economic benefits.
基金funded by the Malaysian Ministry of Higher Education through the Fundamental Research Grant Scheme(FRGS/1/2024/ICT02/UCSI/02/1).
文摘Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.
基金supported by the project Major Scientific and Technological Special Project of Guizhou Province([2024]014).
文摘Load frequency control(LFC)is a critical function to balance the power consumption and generation.Thegrid frequency is a crucial indicator for maintaining balance.However,the widely used information and communication infrastructure for LFC increases the risk of being attacked by malicious actors.The dynamic load altering attack(DLAA)is a typical attack that can destabilize the power system,causing the grid frequency to deviate fromits nominal value.Therefore,in this paper,we mathematically analyze the impact of DLAA on the stability of the grid frequency and propose the network parameter regulation(NPR)to mitigate the impact.To begin with,the dynamic LFC model is constructed by highlighting the importance of the network parameter.Then,we model the DLAA and analyze its impact on LFC using the theory of second-order dynamic systems.Finally,we model the NPR and prove its effect in mitigating the DLAA.Besides,we construct a least-effort NPR considering its infrastructure cost and aim to reduce the operation cost.Finally,we carry out extensive simulations to demonstrate the impact of the DLAA and evaluate the mitigation performance of NPR.The proposed cost-benefit NPR approach can not only mitigate the impact of DLAA with 100%and also save 41.18$/MWh in terms of the operation cost.
基金funded by the National Natural Science Foundation of China(Grand No.52325904)National Key Research and Development Program of China(Grant No.2023YFB2390200)the National Natural Science Foundation of China(Grant No.52309134).
文摘Laser-assisted drilling combined with full-size polycrystalline diamond compact(PDC)bit is considered a feasible solution to enhance the drilling performance of engineering machinery.In this method,determining the optimal collaborative control parameters that support rapid drilling is crucial for improving the combined performance.This study used average drilling speed,average torque,and total specificenergy for quantitative analysis to characterize the efficiencyand economy of combined rock breaking.Given the advantage of the response surface methodology in providing high-precision predictions with limited experimental data,regression models of the average drilling speed,average torque,and total specificenergy were established.The results showed that as the laser power and irradiation time increased,the average drilling speed firstincreased rapidly and then leveled off,while the average torque decreased sharply before decelerating.The total specificenergy initially decreased and then increased,with the combined drilling outperforming conventional mechanical drilling within specific parameter ranges.As the weight on bit increased,both the average torque and total specificenergy first decreased and then increased.With rising rotating speed,the average torque exhibited a trend of initial increase,then decrease,and finalincrease,whereas the total specificenergy increased slowly at firstand then sharply.Both parameters exhibited optimal values at which the average torque and total specific energy remained at minimal levels.For granite combined drilling,the optimal performance was achieved at a laser power of 3000 W,irradiation time of 31 s,the weight on bit of 2.4 kN,and the rotating speed of 97 r/min.
基金funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R442)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.
文摘The internal flow fields within a three-dimensional inward-tunning combined inlet are extremely complex,especially during the engine mode transition,where the tunnel changes may impact the flow fields significantly.To develop an efficient flow field reconstruction model for this,we present an Improved Conditional Denoising Diffusion Generative Adversarial Network(ICDDGAN),which integrates Conditional Denoising Diffusion Probabilistic Models(CDDPMs)with Style GAN,and introduce a reconstruction discrimination mechanism and dynamic loss weight learning strategy.We establish the Mach number flow field dataset by numerical simulation at various backpressures for the mode transition process from turbine mode to ejector ramjet mode at Mach number 2.5.The proposed ICDDGAN model,given only sparse parameter information,can rapidly generate high-quality Mach number flow fields without a large number of samples for training.The results show that ICDDGAN is superior to CDDGAN in terms of training convergence and stability.Moreover,the interpolation and extrapolation test results during backpressure conditions show that ICDDGAN can accurately and quickly reconstruct Mach number fields at various tunnel slice shapes,with a Structural Similarity Index Measure(SSIM)of over 0.96 and a Mean-Square Error(MSE)of 0.035%to actual flow fields,reducing time costs by 7-8 orders of magnitude compared to Computational Fluid Dynamics(CFD)calculations.This can provide an efficient means for rapid computation of complex flow fields.
文摘Hypersoft set is an extension of soft set as it further partitions each attribute into its corresponding attribute-valued set.This structure is more flexible and useful as it addresses the limitation of soft set for dealing with the scenarios having disjoint attribute-valued sets corresponding to distinct attributes.The main purpose of this study is to make the existing literature regarding neutrosophic parameterized soft set in line with the need of multi-attribute approximate function.Firstly,we conceptualize the neutrosophic parameterized hypersoft sets under the settings of fuzzy set,intuitionistic fuzzy set and neutrosophic set along with some of their elementary properties and set theoretic operations.Secondly,we propose decision-making-based algorithms with the help of these theories.Moreover,illustrative examples are presented which depict the structural validity for successful application to the problems involving vagueness and uncertainties.Lastly,the generalization of the proposed structure is discussed.
基金supported by National Natural Science Foundation of China (Nos. 11475039, 11705020, 11605023)Liaoning Provincial Natural Science Foundation of China (No. 20170540153)
文摘The complex nature of laser-material interaction causes non-stoichiometric ablation of alloy samples.This is attributed to matrix effect, which reduces analyzing capability. To address this issue, the analytical performance of three different normalization methods, namely normalization with background, internal normalization and three point smoothing techniques at different parameter settings is studied for quantification of Ag and Zn by Laser induced breakdown spectroscopy(LIBS).The LIBS spectra of five known concentration of silver zinc binary composites have been investigated at various laser irradiances(LIs). Calibration curves for both Ag(I) line(4d^(10)5s^2S_(1/2)→4d^(10)5p^2P_(1/2) at 338.28 nm) and Zn(I) line(4s5s^3S_1→4s4p^3P_2 at 481.053 nm) have been determined at LI of 5.86?×?10^(10)W cm^(-2). Slopes of these calibration curves provide the valuation of matrix effect in the Ag–Zn composites. With careful sample preparation and normalization after smoothing at optimum parameter setting(OPS), the minimization of sample matrix effect has been successfully achieved. A good linearity has been obtained in Ag and Zn calibration curve at OPS when normalized the whole area of spectrum after smoothing and the obtained coefficients of determination values were R^2?=?0.995 and 0.998 closer to 1. The results of matrix effect have been further verified by analysis of plasma parameters. Both plasma parameters showed no change with varying concentration at OPS. However, at high concentration of Ag, the observed significant changes in both plasma parameters at common parameter setting PS-1 and PS-2 were the gesture of matrix effect. In our case, the better analytical results were obtained at smoothing function with optimized parameter setting that indicates it is more efficient than normalization with background and internal normalization method.
基金Sponsored by the Specialized Research Fund for the Doctoral Program of Higher Education(Grant No. 20050213006)
文摘A new mothod was presented to find the optimal location and parameter setting of Thyristor Controlled Series Compensator (TCSC) to maxmize the transfer capability.Firstly the sensitivity of the transfer capability with respect was described to the line's reactance was described to find the more sensitive lines for installing TCSC,however,the line which has the most sesitivity value is always not the best line for installing TCSC.For solving this problem,the more sensitive m lines were selected as the alternative line group of installing TCSC,and then modified particle swarm optimization (MPSO) was used to find out the optimal location and the optimal parameter settings of TCSC.Particle swarm optimization (PSO) algorithm can results premature convergence.For solving this problem,population entropy and cellular automata were introduced to it.Simulation results of IEEE 30-bus system proved the effectiveness of the method and its application values.
基金Supported by Fujian Natural Science Foundation(A0110010).
文摘The setting of attention parameters plays a role in the performance of synergetic neural network based on PFAP model. This paper first analyzes the attention parameter setting algorithm based on award-penalty learning mechanism. Then, it presents an improved algorithm to overcome its drawbacks. The experimental results demonstrate that the novel algorithm is better than the original one under the same circumstances.
文摘Medical ultrasound contrast imaging is a powerful modality undergoing successive developments in the last decade to date Lately, pulse inversion has been used in both ultrasound tissue harmonic and contrast imaging. However, there was a tradeoff between resolution and penetration. Chirp excitations partially solved the tradeoff, but the chirp setting parameters were not optimized. The present work proposes for the first time combining chirp inversion with ultrasound contrast imaging, with the motivation to improve the contrast, by automatically optimizing the setting parameters of chirp excitation, it is thus an optimal command problem. Linear chirps, 5 μm diameter microbubbles and gradient ascent algorithm were simulated to optimize the chirp setting parameters. Simulations exhibited a gain of 5 dB by automatic optimization of chirp inversion relative to pulse inversion. The automatic optimization process was quite fast. Combining chirp inversion with ultrasound contrast imaging led to a maximum backscattered power permitting high contrast outcomes and optimum parameters.
基金Sponsored by the National Natural Science Foundation of China (Grant No.60432040)the Natural Science Foundation of Guangdong Privince(Grant No.9451805707003235)
文摘For impulse radio ultra-wideband (IR-UWB) ranging systems,effects of the settings of transmitter-related parameters, which include the pulse shape, the bandwidth and the pulse repetition interval (PRI), on ranging accuracy were studied through theoretical analysis and simulations. Both the match-filtering based coherent TOA estimation algorithm and the energy-detection based non-coherent algorithm were used during simulations. Results show that the pulse shape has the least effect on the ranging accuracy. Increasing the pulse bandwidth can improve the ranging performance, but the performance is hardly improved any more when the bandwidth is increased beyond a certain level. PRI should be set long enough to guarantee the accurate ranging, because when PRI is shorter than the maximum excess delay of the channel, the ranging accuracy will be deteriorated by inter-pulse interference.
文摘General surgery hernia is a common and frequently- occurring disease in the world. In the tension-free hernia repair surgery, polypropylene （PP） patch has been confirmed as the most popular surgical implants. In this study, domestic medical PP monofilament was selected as raw material whose diameter was 0.15 mm, and the patch was knitted in the warp knitting machine of 12E gauge with one bar. Using the method of orthogonal experiment with three factors and three levels, the best heat-setting process of PP mesh was determined at the temperature of 130 ~C with 10 min under tension-free conditions. The relationship between heat-setting tension and performance of the patch was discussed. Patches with different porosity were prepared, and then structural parameters including density, thickness, porosity, and mechanical properties including tensile breaking strength, bursting strength, tearing strength, flexural rigidity and suture pulling out strength were tested and compared. The experimental results show that： the smaller of the patch＇s density, the higher of the porosity; other properties including density, thickness, bending stiffness, tensile breaking strength, bursting strength, tear strength, and suture pulling out strength reduce in varying degrees. This different degree of reduction is worth summarizing.
