A new technique was introduced for sand stabilization and re-vegetation by use of lignin sand stabilizing material(LSSM). LSSM is a reconstructed organic compound with lignin as the most dominant component from the ex...A new technique was introduced for sand stabilization and re-vegetation by use of lignin sand stabilizing material(LSSM). LSSM is a reconstructed organic compound with lignin as the most dominant component from the extracts of black-liquor issued by straw pulp paper mills. Unlike the polyvinyl acetate or foamed asphalt commonly used for dune stabilization, the new material is plant-friendly and can be used with virescence actions simultaneously. The field experimental study was conducted since 2001 in China's Northwest Ningxia Hui Autonomous Region and has been proved that LSSM is effective in stabilizing the fugitive dunes, making the arenaceous plants survive and the bare dune vegetative. The advisable solution concentration is 2% and the optimal field spraying quantity is 2 5 L/m^2 The soil nutrients of the stabilized and greened dune, such as organic matter, available phosphorous and total nitrogen are all increased compared with the control treatment, which is certainly helpful to the growth of arenaceous plants. The technique is worthwhile to be popularized because it is provided not only a new method for desertification control but also an outlet for cleaning contaminants issued from the straw paper mills.展开更多
The treatment of wastewater from pulp-paper plants in China by horseradish peroxidase was investigated in this study. The effects of horseradish peroxidase and coagulants were discussed in detail. The results indica...The treatment of wastewater from pulp-paper plants in China by horseradish peroxidase was investigated in this study. The effects of horseradish peroxidase and coagulants were discussed in detail. The results indicated that enzymes might improve the removal of AOX, TOC and colour for pulp\|paper wastewater and modified chitosan is far more effective than Al\-2(SO\-4)\-3 to remove AOX, TOC and colour.展开更多
A novel flocculant LA （lignin-acrylamide polymer）, which was used as aid for aluminum sulfate and polyaluminum chloride in this study, was prepared by grafting acrylamide onto lignin that deriving from pulp and pape...A novel flocculant LA （lignin-acrylamide polymer）, which was used as aid for aluminum sulfate and polyaluminum chloride in this study, was prepared by grafting acrylamide onto lignin that deriving from pulp and papermaking sludge. Physicochemical properties of LA were measured by X-ray photoelectron spectroscopy and scanning electron microscopy. The experimental outcome indicated acrylamide was grafted onto the lignin backbone successfully. The effects of LA addition were evaluated on coagulation performance and floc characteristics as a function of aluminum （Al） dosage, such as floc size, growth rate, strength and recoverability. Effects of different dosing sequences, Al dosed first and LA dosed first, were also investigated. LA used as coagulant aid markedly enhanced the removal efficiency of turbidity and dissolved organic carbon, especially at low Al dosages. The dissolved organic carbon removal efficiencies of aluminum sulfate and polyaluminum chloride at the Al dosage range selected in this study were improved more than 30% and 5% by LA, respectively. LA dramatically enlarged floc size and it was in the order： Al dosed first 〉 LA dosed first 〉 Al. Floc strength and recoverability were also improved by LA. LA played a significant role in charge neutralization, adsorption and bridging in floc formation.展开更多
A pentachlorophenol （PCP） mineralizing bacterium was isolated from the secondary sludge of pulp and paper mill and identified as Pseudomonas stutzeri strain CL7. This isolate used PCP as its sole source of carbon an...A pentachlorophenol （PCP） mineralizing bacterium was isolated from the secondary sludge of pulp and paper mill and identified as Pseudomonas stutzeri strain CL7. This isolate used PCP as its sole source of carbon and energy and was capable of degrading this compound as indicated by stoichiometric release of chloride and biomass formation. P. stutzeri （CL7） was able to mineralize a high concentration of PCP （600 mg/L） than any previously reported Pseudomonad with PCP as sole carbon source. As the concentration of PCP increased from 50 to 600 mg/L, the reduction in the cell growth was observed and the PCP degradation was more than 90% in all studied concentrations. This isolate was able to remove 66.8% of PCP from the secondary sludge of pulp and paper mill when supplemented with 100 mg/L of PCP and grown for two weeks. This study showed that the removal efficiency of PCP by CL7 was found to be very effective and can be used in PCP remediation of pulp paper mill waste in the environment.展开更多
TOC and color in the bleaching effluent from straw pulp paper process could not reach draining standard after its treatment by a biochemical process. In this study, advanced treatment by integrated micro-electrolysis ...TOC and color in the bleaching effluent from straw pulp paper process could not reach draining standard after its treatment by a biochemical process. In this study, advanced treatment by integrated micro-electrolysis （Fe^0） method and Fenton-like process was investigated under various conditions, i.e. pH, Fe/C ratio, initial I-I2O2 concentration and carrier gas. Results showed that Fe/C ratio（V/V = 1.5）, larger H2O2 dosage around 50 rag/L, lower pH（pH= 3） turned out to be particularly efficient. Temperature was a key parameter, remarkably increasing reaction rates. Carrier air not only improved reaction efficiency, but also saved H2O2 dosage. Chlorinated organic compounds could be reductive dechlorinated by Fe^0 reaction and oxidated by OH produced from Fenton process. The combination of Fe^0 and H2O2 reactions had been proved to be highly effective for the advanced treatment of such a type of wastewaters, and important advantages concerning the application in the study.展开更多
Two distinct lignocellulosic fractions(rind and core)can be obtained through a physical separation of sugarcane stalks.Although presenting differences in morphology,both fractions can be employed to produce pulps and ...Two distinct lignocellulosic fractions(rind and core)can be obtained through a physical separation of sugarcane stalks.Although presenting differences in morphology,both fractions can be employed to produce pulps and papers.The pulps and paper sheets produced from the core and rind fractions were characterized by their chemical composition,physical properties and mechanical properties.The pulps obtained from the core presented a higher amount of fines,lower drainage ability and rendered denser and stiffer sheets.The pulps from the rind,which have a higher content of fibers and higher degree of polymerization,produced sheets with higher air permeability and water absorption.Both paper sheets presented mechanical and physical properties comparable to commercial papers and papers from different cellulosic sources.The different properties exhibited by the papers produced from each fraction allow their use for distinct purposes,and expands the opportunities in the context of sugarcane biorefinery.展开更多
Electrocoagulation of pulp and paper industry effluent with SS-304 electrode has been carried out under varying process variable such as pH, current density, time and dose of electrolyte to find out the optimum condit...Electrocoagulation of pulp and paper industry effluent with SS-304 electrode has been carried out under varying process variable such as pH, current density, time and dose of electrolyte to find out the optimum conditions. Maximum reduction efficiency of Chemical Oxygen Demand (COD) 82% and color more than 99% from pulp and paper industry wastewater at the following conditions pH = 7, current density = 24.80 mA/cm2 time = 40 min and dose of electrolytes = 1.0 g/L. Moreover, effects of electrolytes dosage on electricity consumption were observed and found to be that NaCl is better in comparison of Na2SO4 in respect of lower down the electricity consumption. But application of NaCl causes the formation of hazardous compounds as secondary pollutants within treated water. Therefore, Na2SO4 could be a potent replacement of NaCl to enhance the conductivity of paper industry effluent treated by EC process. The treated water has been compared with standard of Central Pollution control board (CPCB) and World Health organization, and found to be suitable for the reuse in irrigation.展开更多
In the present study pulp and paper industry effluent was treated with the help of aluminum electrode using electrocoagulation (EC) process with feasible sludge management. The influences of pH, time, current density ...In the present study pulp and paper industry effluent was treated with the help of aluminum electrode using electrocoagulation (EC) process with feasible sludge management. The influences of pH, time, current density and electrolytes dose were investigated and optimum conditions were established to reduce the maximum amount of Chemical Oxygen Demand (COD) and color. At optimum conditions 70% of COD and 98% of color were removed. Additionally, the behavior of electrolytes (NaCl and Na2SO4) was determined;it has shown that Na2SO4 results in the generation of less secondary pollutants than that NaCl and thereby could be used as better replacement in paper industries for electrocoagulation mediated treatment of wastewater. The residual amount of operational parameters in EC treated water was compared to the World Health Organization (WHO) and Central Pollution Control Board (CPCB) of India. It was found to be safe for utilization in irrigation. Furthermore, sludge produced during the EC process has been analyzed for physicochemical characteristics. To understand the physical and elemental phases of sludge, the analytical technique such as field emission electron microscope coupled with energy dispersive spectroscopy has been used to find out the possible management alternative.展开更多
The effectiveness of ClO_2 bleaching as a replacement for conventional Cl_2 bleaching,which is intensively practiced in developing countries,to reduce polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)in non...The effectiveness of ClO_2 bleaching as a replacement for conventional Cl_2 bleaching,which is intensively practiced in developing countries,to reduce polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)in non-wood pulp and paper mills has not been field tested.The first field study was performed to investigate PCDD/F variations when ClO_2 bleaching was used as a substitute for conventional Cl_2 bleaching in a non-wood pulp and paper mill.It was found that the PCDD/F toxic equivalents(TEQs)in solid and effluent samples were approximately 1.3–14.9 times lower when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.2,3,7,8-Substituted tetrachlorinated dibenzofurans(2,3,7,8-TCDF)were the dominant contributors to total PCDD/F TEQs in samples from the investigated mill when using conventional Cl_2 bleaching.The formation amounts of 2,3,7,8-TCDF were reduced from 1.56–2.76 pg TEQ/g to 0.02–0.32 pg TEQ/g in solid samples when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.The replacement of Cl_2 with ClO_2 might decrease the chlorination reactions of dibenzofuran as potential precursors,and thus reduce the formation amounts of 2,3,7,8-TCDF.The results could provide important knowledge for suggesting the best available technique for PCDD/F reduction for non-wood pulp and paper mills in developing countries.展开更多
Bleaching with oxygen-containing agents and recirculation of process streams in the pulp and paper industry has increased the accumulation of oxalic acid and danger for precipitation of calcium oxalate encrusts, scali...Bleaching with oxygen-containing agents and recirculation of process streams in the pulp and paper industry has increased the accumulation of oxalic acid and danger for precipitation of calcium oxalate encrusts, scaling. Analysis and control of oxalic acid in bleaching filtrates is therefore becoming increasingly important in the pulp and paper industry. Chromatographic methods, such as IC and HPLC, are generally more time-consuming but are valuable as standard methods for determination of oxalic acid. However, the instrumentation needed is expensive and stationary. In this study, an enzymatic method based on oxalate oxidase and peroxidase was developed to determine oxalic acid in authentic bleaching filtrates using a spectrophotometer. The results showed that bleaching filtrates contain some compounds interfering with the enzymatic method. Pretreatment of the samples with activated charcoal was a successful approach for decreasing problems with interference. By using dilution followed by charcoal treatment, the results obtained from five bleaching filtrates with the colorimetric method correlated very well with those obtained using IC. This study offers a selective, fast and mobile analysis method to determine oxalic acid in bleaching fiRrates from the pulp and paper industry, The convenient enzyme-based method improves the possibilities for control of critical oxalic acid concentrations in closed-loop bleaching streams.展开更多
Water pollution from the pulp and paper industry is one of the most serious environment problems in China. In order to prevent and treat pollution of the pulp and paper industry, the following works have been done in ...Water pollution from the pulp and paper industry is one of the most serious environment problems in China. In order to prevent and treat pollution of the pulp and paper industry, the following works have been done in recent years: 1. Making necessary policies, measures and regulations; 2. Making overall planning and rational layout; 3. Relying mainly on internal treatment developing external treatment as supplement; 4. Improving the technology of treating wastewater of the pulp and paper industry.展开更多
Nowadays, recycled paper is broadly used due to environmental reasons. Furthermore, the addition of starch as a dry strength additive improves the properties of recycled paper. Poly-Lactic Acid (PLA), a product from b...Nowadays, recycled paper is broadly used due to environmental reasons. Furthermore, the addition of starch as a dry strength additive improves the properties of recycled paper. Poly-Lactic Acid (PLA), a product from bio-refinery process, has recently been shown to act as a promising strength additive that could be used in combination with starch to further improve the strength of paper. In this study, the use of PLA of three molecular weights (MW) in combination with four different starches was investigated. Three recycled pulps from different origins, with the kappa number of 27.9 to 66 were used. Paper handsheets were made, and selected paper properties were tested. The results indicate that handsheets properties were influenced by the MW of PLAs, the type of starch used, and the lignin content of the pulp. The paper handsheets made from lignin-rich pulp (pulp A, kappa number 66), combined with 0.1% medium MW PLA (PLA_1) and 0.9% cationic starch containing 0.43% N gave the highest improvement for tensile strength, wet tensile strength, air and water resistance. This result verifies that a higher kappa number pulp has better attraction to the hydrophobic PLA. Moreover, the higher charge cationic starch led to higher tensile strength due to the increase of affinity to the anionic fiber surface. Interestingly, results show that amphoteric starch is a promising substitute for high cationic charge starch when combined with the medium MW PLA to improve tensile strength of paper. This study demonstrated that a starch-PLA blend represents a promising approach in improving properties of recycled paper.展开更多
Wastewater samples were collected from pulp and paper mill located in Kashipur (India) and were extracted using dichloromethane (DCM), chloroform and hexane solvents (all were HPLC-grade). The extracts were assayed fo...Wastewater samples were collected from pulp and paper mill located in Kashipur (India) and were extracted using dichloromethane (DCM), chloroform and hexane solvents (all were HPLC-grade). The extracts were assayed for their mutagenic potential using Ames Salmonella mutagenicity assay. TA98 strain was found to be the most responsive, in terms of induction factor (Mi) and slope (m) of the initial linear dose-response curve as determined by linear regression analysis up to the increasing doses indicating the presence of frame shift mutagens in the test samples. Mutagenicity of different extracts is arranged as follows: dichloromethane extracted water samples > hexane extracted water samples > chloroform extracted water samples. Hexane extract exhibited maximum mutagenic index of 13.0 and induction factor (Mi) 2.48 with TA98. The order of responsiveness based on the mutagenic index and induction factor for the test samples was in the following order: TA98 > TA97a > TA100 > TA102 > TA104. Our findings suggest that TA97a, TA98, TA100, TA102, TA104 were sensitive towards the wastewater extracts and showed considerable mutagenicity.展开更多
Industrial sector is the largest user of energy in India and in many parts of the world. The pulp and paper industry accounted for 6% of total global industrial energy consumption, being the fourth largest energy cons...Industrial sector is the largest user of energy in India and in many parts of the world. The pulp and paper industry accounted for 6% of total global industrial energy consumption, being the fourth largest energy consumer worldwide. For India, energy audit of a paper carton manufacturing unit was earlier reported with the following results. The specific electrical and thermal energy consumption was estimated as 91.85 kWh/ton and 1619 MJ/ton paper respectively. Annual energy saving potential was found to be 5.9% of the total annual energy consumption. With a view to identifying energy conservation and CO2 mitigation opportunities in writing, tissue, and craft paper production, this article presents energy auditing of a paper industry (Orient Paper Mills) in Amlai, Shahdol, Madhya Pradesh, India. The specific energy consumption of the typical paper industry in India was evaluated as 34.3 GJ per ton paper and specific CO2 emissions as 3.4 tons CO2 per ton paper. Some energy conservation opportunities for this industry were identified with significant energy saving (nearly 3.5%) and money saving potential with payback periods not exceeding 2 years in general.展开更多
The food packaging industry generally uses papers and paperboards (PPBs) especially for disposable products. According to the Framework Regulation (EC) No. 1935/2004 of the European Union, no transfer of contamination...The food packaging industry generally uses papers and paperboards (PPBs) especially for disposable products. According to the Framework Regulation (EC) No. 1935/2004 of the European Union, no transfer of contamination should occur from food packaging material to the food items. The aim of this study was to determine the presence, numbers, source and different kinds of bacteria present in food packaging PPBs with various contents of pulp fiber. The samples were randomly collected from popular confectioners and fast food restaurants in Saharanpur, India. The results indicated the presence of bacteria in all the samples, ranging from 1.3 × 102 to 6.1 × 103 cfu/g. Most of the samples contained bacteria in more than the permitted concentration of 2.5 × 102 cfu/g as set by Food and Drug Administration (FDA). The detected bacteria were from genera Bacillacea, Staphylococcus and Pseudomonas. According to the FDA declaration, pathogenic bacteria such as B. cereus and S. aureus have been associated with food borne diseases (FBD). Some contaminants in food packaging PPBs were found to be B. subtilis and P. aeroginosa, which produce enzymes like peroxidases and lipoxygenases that are odor generating enzymes.展开更多
This study investigated the potential of oleaginous yeast Rhodotorula glutinis utilizing pulp and paper wastewater effluents as cultivation media for the sustainable production of microbial lipids as biodiesel feedsto...This study investigated the potential of oleaginous yeast Rhodotorula glutinis utilizing pulp and paper wastewater effluents as cultivation media for the sustainable production of microbial lipids as biodiesel feedstock. R. glutinis is oleaginous yeast, which has the ability to produce significant quantities of intercellular lipids in the form of triacylglycerols. Yeast lipids are a promising potential feedstock for biodiesel production due to similar fatty acid composition to plant oils. The effect of various carbon sources on biomass production, lipid accumulation, substrate utilization, and fatty acid composition using R. glutinis in the pulp and paper wastewater media was studied. The pulp and paper wastewater was supplemented with glucose, xylose, and glycerol as carbon sources under nitrogen-limited conditions. The maximum lipid productions of 1.3 - 2.9 g•L–1, which corresponded to the intracellular lipid contents of 8% - 15% cell dry weight (CDW), were obtained under various carbon substrates. A kinetic study of the batch fermentation was performed in a 3 L aerobic batch fermenter to describe the cell growth, lipid accumulation, and substrate utilization process, and the kinetic parameter was estimated. The fatty acid profile of oleaginous yeast was rich in palmitic, oleic, and linoleic acids and comparable to vegetable oils. Thus, the results of this study indicated that pulp and paper wastewater could be used to produce lipids as biodiesel feedstock.展开更多
From August 12 to 15,the 2025 China International Paper Technology Exhibition(hereina?t er referred to as“CIPTE”)was successfully held in Shanghai.Hosted by the China Paper Association,China Technical Association of...From August 12 to 15,the 2025 China International Paper Technology Exhibition(hereina?t er referred to as“CIPTE”)was successfully held in Shanghai.Hosted by the China Paper Association,China Technical Association of Paper Industry,and China National Pulp and Paper Research Institute Co.,Ltd.(below referred to as“CNPPRI”),and organized by China Pulp and Paper Magazines Publisher,this event received strong support and extensive attention from industry peers.展开更多
Liansi paper is a kind of traditional handmade bamboo paper produced in Yanshan County,Jiangxi Province,whose handicraft technique is listed as a national intangible cultural heritage protection project.This study con...Liansi paper is a kind of traditional handmade bamboo paper produced in Yanshan County,Jiangxi Province,whose handicraft technique is listed as a national intangible cultural heritage protection project.This study conducted a field survey in Shangrao,and the main survey areas included Guangxin District and the Hekou,Goose Lake,Gexian Mountain,Tianzhu Mountain,Chenfang,and Shitang townships.Field investigators communicated with a group of intangible cultural heritage inheritors,and with their assistance,clarified the steps and processes involved in the production of Liansi paper.The handicraft technique of Liansi paper consists of five steps:chopping bamboo to make bamboo filaments,steaming bamboo filaments to make bamboo pulp,interweaving fibers into wet paper,drying wet paper,and package processing.A total of 13 processes are involved:chopping bamboo,fermentation,making bamboo filaments,soaking bamboo filaments,steaming bamboo filaments,natural bleaching,pounding bamboo filaments to make bamboo pulp,stirring pulp,adding plant mucilage,interweaving bamboo fibers into wet paper,pressing paper,drying wet paper,and package processing.展开更多
Against the backdrop of the dual carbon goals,the papermaking industry in China faces significant pressure to reduce emissions and lower carbon intensity.Based on historical data of energy consumption in the pulp and ...Against the backdrop of the dual carbon goals,the papermaking industry in China faces significant pressure to reduce emissions and lower carbon intensity.Based on historical data of energy consumption in the pulp and paper industry in China from 2000 to 2020,this study analyzed the current status of paper production and energy consumption in China.Two methods were employed to predict the growth trend of paper production in China,and three carbon dioxide emission accounting methods were compared.The study used an accounting method based on the industry’s overall energy consumption and predicted the carbon dioxide(CO_(2))emissions of the Chinese papermaking industry from 2021 to 2060 under three scenarios.The study identified the timing for achieving carbon peak and proposed the measures for carbon neutrality.The results indicated that:(1)the CO_(2)emissions of the Chinese papermaking industry in 2020 were 111.98 million tons.(2)Under low-demand,high-demand,and baseline scenarios,the papermaking industry is expected to achieve carbon peak during the“14th Five-Year Plan”period.(3)In 2060,under the three scenarios,CO_(2)emissions from the papermaking industry will decrease by 11%-31%compared to the baseline year.However,there will still be emissions of 72-93 million tons,requiring reductions in fossil energy consumption at the source,increasing forestry carbon sequestration and utilization of Carbon Capture,Utilization and Storage(CCUS)technology,and taking measures such as carbon trading to achieve carbon neutrality.展开更多
文摘A new technique was introduced for sand stabilization and re-vegetation by use of lignin sand stabilizing material(LSSM). LSSM is a reconstructed organic compound with lignin as the most dominant component from the extracts of black-liquor issued by straw pulp paper mills. Unlike the polyvinyl acetate or foamed asphalt commonly used for dune stabilization, the new material is plant-friendly and can be used with virescence actions simultaneously. The field experimental study was conducted since 2001 in China's Northwest Ningxia Hui Autonomous Region and has been proved that LSSM is effective in stabilizing the fugitive dunes, making the arenaceous plants survive and the bare dune vegetative. The advisable solution concentration is 2% and the optimal field spraying quantity is 2 5 L/m^2 The soil nutrients of the stabilized and greened dune, such as organic matter, available phosphorous and total nitrogen are all increased compared with the control treatment, which is certainly helpful to the growth of arenaceous plants. The technique is worthwhile to be popularized because it is provided not only a new method for desertification control but also an outlet for cleaning contaminants issued from the straw paper mills.
文摘The treatment of wastewater from pulp-paper plants in China by horseradish peroxidase was investigated in this study. The effects of horseradish peroxidase and coagulants were discussed in detail. The results indicated that enzymes might improve the removal of AOX, TOC and colour for pulp\|paper wastewater and modified chitosan is far more effective than Al\-2(SO\-4)\-3 to remove AOX, TOC and colour.
文摘A novel flocculant LA （lignin-acrylamide polymer）, which was used as aid for aluminum sulfate and polyaluminum chloride in this study, was prepared by grafting acrylamide onto lignin that deriving from pulp and papermaking sludge. Physicochemical properties of LA were measured by X-ray photoelectron spectroscopy and scanning electron microscopy. The experimental outcome indicated acrylamide was grafted onto the lignin backbone successfully. The effects of LA addition were evaluated on coagulation performance and floc characteristics as a function of aluminum （Al） dosage, such as floc size, growth rate, strength and recoverability. Effects of different dosing sequences, Al dosed first and LA dosed first, were also investigated. LA used as coagulant aid markedly enhanced the removal efficiency of turbidity and dissolved organic carbon, especially at low Al dosages. The dissolved organic carbon removal efficiencies of aluminum sulfate and polyaluminum chloride at the Al dosage range selected in this study were improved more than 30% and 5% by LA, respectively. LA dramatically enlarged floc size and it was in the order： Al dosed first 〉 LA dosed first 〉 Al. Floc strength and recoverability were also improved by LA. LA played a significant role in charge neutralization, adsorption and bridging in floc formation.
文摘A pentachlorophenol （PCP） mineralizing bacterium was isolated from the secondary sludge of pulp and paper mill and identified as Pseudomonas stutzeri strain CL7. This isolate used PCP as its sole source of carbon and energy and was capable of degrading this compound as indicated by stoichiometric release of chloride and biomass formation. P. stutzeri （CL7） was able to mineralize a high concentration of PCP （600 mg/L） than any previously reported Pseudomonad with PCP as sole carbon source. As the concentration of PCP increased from 50 to 600 mg/L, the reduction in the cell growth was observed and the PCP degradation was more than 90% in all studied concentrations. This isolate was able to remove 66.8% of PCP from the secondary sludge of pulp and paper mill when supplemented with 100 mg/L of PCP and grown for two weeks. This study showed that the removal efficiency of PCP by CL7 was found to be very effective and can be used in PCP remediation of pulp paper mill waste in the environment.
文摘TOC and color in the bleaching effluent from straw pulp paper process could not reach draining standard after its treatment by a biochemical process. In this study, advanced treatment by integrated micro-electrolysis （Fe^0） method and Fenton-like process was investigated under various conditions, i.e. pH, Fe/C ratio, initial I-I2O2 concentration and carrier gas. Results showed that Fe/C ratio（V/V = 1.5）, larger H2O2 dosage around 50 rag/L, lower pH（pH= 3） turned out to be particularly efficient. Temperature was a key parameter, remarkably increasing reaction rates. Carrier air not only improved reaction efficiency, but also saved H2O2 dosage. Chlorinated organic compounds could be reductive dechlorinated by Fe^0 reaction and oxidated by OH produced from Fenton process. The combination of Fe^0 and H2O2 reactions had been proved to be highly effective for the advanced treatment of such a type of wastewaters, and important advantages concerning the application in the study.
文摘Two distinct lignocellulosic fractions(rind and core)can be obtained through a physical separation of sugarcane stalks.Although presenting differences in morphology,both fractions can be employed to produce pulps and papers.The pulps and paper sheets produced from the core and rind fractions were characterized by their chemical composition,physical properties and mechanical properties.The pulps obtained from the core presented a higher amount of fines,lower drainage ability and rendered denser and stiffer sheets.The pulps from the rind,which have a higher content of fibers and higher degree of polymerization,produced sheets with higher air permeability and water absorption.Both paper sheets presented mechanical and physical properties comparable to commercial papers and papers from different cellulosic sources.The different properties exhibited by the papers produced from each fraction allow their use for distinct purposes,and expands the opportunities in the context of sugarcane biorefinery.
文摘Electrocoagulation of pulp and paper industry effluent with SS-304 electrode has been carried out under varying process variable such as pH, current density, time and dose of electrolyte to find out the optimum conditions. Maximum reduction efficiency of Chemical Oxygen Demand (COD) 82% and color more than 99% from pulp and paper industry wastewater at the following conditions pH = 7, current density = 24.80 mA/cm2 time = 40 min and dose of electrolytes = 1.0 g/L. Moreover, effects of electrolytes dosage on electricity consumption were observed and found to be that NaCl is better in comparison of Na2SO4 in respect of lower down the electricity consumption. But application of NaCl causes the formation of hazardous compounds as secondary pollutants within treated water. Therefore, Na2SO4 could be a potent replacement of NaCl to enhance the conductivity of paper industry effluent treated by EC process. The treated water has been compared with standard of Central Pollution control board (CPCB) and World Health organization, and found to be suitable for the reuse in irrigation.
文摘In the present study pulp and paper industry effluent was treated with the help of aluminum electrode using electrocoagulation (EC) process with feasible sludge management. The influences of pH, time, current density and electrolytes dose were investigated and optimum conditions were established to reduce the maximum amount of Chemical Oxygen Demand (COD) and color. At optimum conditions 70% of COD and 98% of color were removed. Additionally, the behavior of electrolytes (NaCl and Na2SO4) was determined;it has shown that Na2SO4 results in the generation of less secondary pollutants than that NaCl and thereby could be used as better replacement in paper industries for electrocoagulation mediated treatment of wastewater. The residual amount of operational parameters in EC treated water was compared to the World Health Organization (WHO) and Central Pollution Control Board (CPCB) of India. It was found to be safe for utilization in irrigation. Furthermore, sludge produced during the EC process has been analyzed for physicochemical characteristics. To understand the physical and elemental phases of sludge, the analytical technique such as field emission electron microscope coupled with energy dispersive spectroscopy has been used to find out the possible management alternative.
基金support provided by the National 973 program (No. 2015CB453100)the Youth Innovation Promotion Association CAS (No. 2016038)the Strategic Priority Research Program of the CAS (No. XDB14020102)
文摘The effectiveness of ClO_2 bleaching as a replacement for conventional Cl_2 bleaching,which is intensively practiced in developing countries,to reduce polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)in non-wood pulp and paper mills has not been field tested.The first field study was performed to investigate PCDD/F variations when ClO_2 bleaching was used as a substitute for conventional Cl_2 bleaching in a non-wood pulp and paper mill.It was found that the PCDD/F toxic equivalents(TEQs)in solid and effluent samples were approximately 1.3–14.9 times lower when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.2,3,7,8-Substituted tetrachlorinated dibenzofurans(2,3,7,8-TCDF)were the dominant contributors to total PCDD/F TEQs in samples from the investigated mill when using conventional Cl_2 bleaching.The formation amounts of 2,3,7,8-TCDF were reduced from 1.56–2.76 pg TEQ/g to 0.02–0.32 pg TEQ/g in solid samples when ClO_2 bleaching was used instead of the conventional Cl_2 bleaching.The replacement of Cl_2 with ClO_2 might decrease the chlorination reactions of dibenzofuran as potential precursors,and thus reduce the formation amounts of 2,3,7,8-TCDF.The results could provide important knowledge for suggesting the best available technique for PCDD/F reduction for non-wood pulp and paper mills in developing countries.
基金This work was supported by Vinnova and the Knowledge Foundation in Sweden.
文摘Bleaching with oxygen-containing agents and recirculation of process streams in the pulp and paper industry has increased the accumulation of oxalic acid and danger for precipitation of calcium oxalate encrusts, scaling. Analysis and control of oxalic acid in bleaching filtrates is therefore becoming increasingly important in the pulp and paper industry. Chromatographic methods, such as IC and HPLC, are generally more time-consuming but are valuable as standard methods for determination of oxalic acid. However, the instrumentation needed is expensive and stationary. In this study, an enzymatic method based on oxalate oxidase and peroxidase was developed to determine oxalic acid in authentic bleaching filtrates using a spectrophotometer. The results showed that bleaching filtrates contain some compounds interfering with the enzymatic method. Pretreatment of the samples with activated charcoal was a successful approach for decreasing problems with interference. By using dilution followed by charcoal treatment, the results obtained from five bleaching filtrates with the colorimetric method correlated very well with those obtained using IC. This study offers a selective, fast and mobile analysis method to determine oxalic acid in bleaching fiRrates from the pulp and paper industry, The convenient enzyme-based method improves the possibilities for control of critical oxalic acid concentrations in closed-loop bleaching streams.
文摘Water pollution from the pulp and paper industry is one of the most serious environment problems in China. In order to prevent and treat pollution of the pulp and paper industry, the following works have been done in recent years: 1. Making necessary policies, measures and regulations; 2. Making overall planning and rational layout; 3. Relying mainly on internal treatment developing external treatment as supplement; 4. Improving the technology of treating wastewater of the pulp and paper industry.
文摘Nowadays, recycled paper is broadly used due to environmental reasons. Furthermore, the addition of starch as a dry strength additive improves the properties of recycled paper. Poly-Lactic Acid (PLA), a product from bio-refinery process, has recently been shown to act as a promising strength additive that could be used in combination with starch to further improve the strength of paper. In this study, the use of PLA of three molecular weights (MW) in combination with four different starches was investigated. Three recycled pulps from different origins, with the kappa number of 27.9 to 66 were used. Paper handsheets were made, and selected paper properties were tested. The results indicate that handsheets properties were influenced by the MW of PLAs, the type of starch used, and the lignin content of the pulp. The paper handsheets made from lignin-rich pulp (pulp A, kappa number 66), combined with 0.1% medium MW PLA (PLA_1) and 0.9% cationic starch containing 0.43% N gave the highest improvement for tensile strength, wet tensile strength, air and water resistance. This result verifies that a higher kappa number pulp has better attraction to the hydrophobic PLA. Moreover, the higher charge cationic starch led to higher tensile strength due to the increase of affinity to the anionic fiber surface. Interestingly, results show that amphoteric starch is a promising substitute for high cationic charge starch when combined with the medium MW PLA to improve tensile strength of paper. This study demonstrated that a starch-PLA blend represents a promising approach in improving properties of recycled paper.
文摘Wastewater samples were collected from pulp and paper mill located in Kashipur (India) and were extracted using dichloromethane (DCM), chloroform and hexane solvents (all were HPLC-grade). The extracts were assayed for their mutagenic potential using Ames Salmonella mutagenicity assay. TA98 strain was found to be the most responsive, in terms of induction factor (Mi) and slope (m) of the initial linear dose-response curve as determined by linear regression analysis up to the increasing doses indicating the presence of frame shift mutagens in the test samples. Mutagenicity of different extracts is arranged as follows: dichloromethane extracted water samples > hexane extracted water samples > chloroform extracted water samples. Hexane extract exhibited maximum mutagenic index of 13.0 and induction factor (Mi) 2.48 with TA98. The order of responsiveness based on the mutagenic index and induction factor for the test samples was in the following order: TA98 > TA97a > TA100 > TA102 > TA104. Our findings suggest that TA97a, TA98, TA100, TA102, TA104 were sensitive towards the wastewater extracts and showed considerable mutagenicity.
文摘Industrial sector is the largest user of energy in India and in many parts of the world. The pulp and paper industry accounted for 6% of total global industrial energy consumption, being the fourth largest energy consumer worldwide. For India, energy audit of a paper carton manufacturing unit was earlier reported with the following results. The specific electrical and thermal energy consumption was estimated as 91.85 kWh/ton and 1619 MJ/ton paper respectively. Annual energy saving potential was found to be 5.9% of the total annual energy consumption. With a view to identifying energy conservation and CO2 mitigation opportunities in writing, tissue, and craft paper production, this article presents energy auditing of a paper industry (Orient Paper Mills) in Amlai, Shahdol, Madhya Pradesh, India. The specific energy consumption of the typical paper industry in India was evaluated as 34.3 GJ per ton paper and specific CO2 emissions as 3.4 tons CO2 per ton paper. Some energy conservation opportunities for this industry were identified with significant energy saving (nearly 3.5%) and money saving potential with payback periods not exceeding 2 years in general.
文摘The food packaging industry generally uses papers and paperboards (PPBs) especially for disposable products. According to the Framework Regulation (EC) No. 1935/2004 of the European Union, no transfer of contamination should occur from food packaging material to the food items. The aim of this study was to determine the presence, numbers, source and different kinds of bacteria present in food packaging PPBs with various contents of pulp fiber. The samples were randomly collected from popular confectioners and fast food restaurants in Saharanpur, India. The results indicated the presence of bacteria in all the samples, ranging from 1.3 × 102 to 6.1 × 103 cfu/g. Most of the samples contained bacteria in more than the permitted concentration of 2.5 × 102 cfu/g as set by Food and Drug Administration (FDA). The detected bacteria were from genera Bacillacea, Staphylococcus and Pseudomonas. According to the FDA declaration, pathogenic bacteria such as B. cereus and S. aureus have been associated with food borne diseases (FBD). Some contaminants in food packaging PPBs were found to be B. subtilis and P. aeroginosa, which produce enzymes like peroxidases and lipoxygenases that are odor generating enzymes.
文摘This study investigated the potential of oleaginous yeast Rhodotorula glutinis utilizing pulp and paper wastewater effluents as cultivation media for the sustainable production of microbial lipids as biodiesel feedstock. R. glutinis is oleaginous yeast, which has the ability to produce significant quantities of intercellular lipids in the form of triacylglycerols. Yeast lipids are a promising potential feedstock for biodiesel production due to similar fatty acid composition to plant oils. The effect of various carbon sources on biomass production, lipid accumulation, substrate utilization, and fatty acid composition using R. glutinis in the pulp and paper wastewater media was studied. The pulp and paper wastewater was supplemented with glucose, xylose, and glycerol as carbon sources under nitrogen-limited conditions. The maximum lipid productions of 1.3 - 2.9 g•L–1, which corresponded to the intracellular lipid contents of 8% - 15% cell dry weight (CDW), were obtained under various carbon substrates. A kinetic study of the batch fermentation was performed in a 3 L aerobic batch fermenter to describe the cell growth, lipid accumulation, and substrate utilization process, and the kinetic parameter was estimated. The fatty acid profile of oleaginous yeast was rich in palmitic, oleic, and linoleic acids and comparable to vegetable oils. Thus, the results of this study indicated that pulp and paper wastewater could be used to produce lipids as biodiesel feedstock.
文摘From August 12 to 15,the 2025 China International Paper Technology Exhibition(hereina?t er referred to as“CIPTE”)was successfully held in Shanghai.Hosted by the China Paper Association,China Technical Association of Paper Industry,and China National Pulp and Paper Research Institute Co.,Ltd.(below referred to as“CNPPRI”),and organized by China Pulp and Paper Magazines Publisher,this event received strong support and extensive attention from industry peers.
文摘Liansi paper is a kind of traditional handmade bamboo paper produced in Yanshan County,Jiangxi Province,whose handicraft technique is listed as a national intangible cultural heritage protection project.This study conducted a field survey in Shangrao,and the main survey areas included Guangxin District and the Hekou,Goose Lake,Gexian Mountain,Tianzhu Mountain,Chenfang,and Shitang townships.Field investigators communicated with a group of intangible cultural heritage inheritors,and with their assistance,clarified the steps and processes involved in the production of Liansi paper.The handicraft technique of Liansi paper consists of five steps:chopping bamboo to make bamboo filaments,steaming bamboo filaments to make bamboo pulp,interweaving fibers into wet paper,drying wet paper,and package processing.A total of 13 processes are involved:chopping bamboo,fermentation,making bamboo filaments,soaking bamboo filaments,steaming bamboo filaments,natural bleaching,pounding bamboo filaments to make bamboo pulp,stirring pulp,adding plant mucilage,interweaving bamboo fibers into wet paper,pressing paper,drying wet paper,and package processing.
文摘Against the backdrop of the dual carbon goals,the papermaking industry in China faces significant pressure to reduce emissions and lower carbon intensity.Based on historical data of energy consumption in the pulp and paper industry in China from 2000 to 2020,this study analyzed the current status of paper production and energy consumption in China.Two methods were employed to predict the growth trend of paper production in China,and three carbon dioxide emission accounting methods were compared.The study used an accounting method based on the industry’s overall energy consumption and predicted the carbon dioxide(CO_(2))emissions of the Chinese papermaking industry from 2021 to 2060 under three scenarios.The study identified the timing for achieving carbon peak and proposed the measures for carbon neutrality.The results indicated that:(1)the CO_(2)emissions of the Chinese papermaking industry in 2020 were 111.98 million tons.(2)Under low-demand,high-demand,and baseline scenarios,the papermaking industry is expected to achieve carbon peak during the“14th Five-Year Plan”period.(3)In 2060,under the three scenarios,CO_(2)emissions from the papermaking industry will decrease by 11%-31%compared to the baseline year.However,there will still be emissions of 72-93 million tons,requiring reductions in fossil energy consumption at the source,increasing forestry carbon sequestration and utilization of Carbon Capture,Utilization and Storage(CCUS)technology,and taking measures such as carbon trading to achieve carbon neutrality.
