Objective This study aimed to design and evaluate the efficacy of pyrrolidone derivatives as potential therapeutic agents against diffuse large B-cell lymphoma(DLBCL),a common and heterogeneous malignancy of the adult...Objective This study aimed to design and evaluate the efficacy of pyrrolidone derivatives as potential therapeutic agents against diffuse large B-cell lymphoma(DLBCL),a common and heterogeneous malignancy of the adult lymphohematopoietic system.Given the limitations of current therapies,there is a pressing need to develop new and effective drugs for DLBCL treatment.Methods A series of pyrrolidone derivatives were synthesized,and their antitumor activities were assessed,particularly against DLBCL cell lines.Structure-activity relationship(SAR)analysis was conducted to identify key structural components essential for activity.The most promising compound,referred to as compound 7,was selected for further mechanistic studies.The expression levels of relevant mRNA and protein were detected by RT-qPCR and Western blotting,and the expression of mitochondrial membrane potential and ROS was detected using flow cytometry for further assessment of cell cycle arrest and apoptosis.Results The compound 7 exhibited good antitumor activity among the synthesized derivatives,specifically in DLBCL cell lines.SAR analysis highlighted the critical role ofα,β-unsaturated ketones in the antitumor efficacy of these compounds.Mechanistically,compound 7 was found to induce significant DNA damage,trigger an inflammatory response,cause mitochondrial dysfunction,and disrupt cell cycle progression,ultimately leading to apoptosis of DLBCL cells.Conclusion The compound 7 has good antitumor activity and can induce multiple cellular mechanisms leading to cancer cell death.These findings warrant further investigation of the compound 7 as a potential therapeutic agent for DLBCL.展开更多
A new N-phenyl-pyrrolidone derivative had been isolated from Pistacia chinesis Bunge. Its structure was elucidated as 4-hydroxy-5-（2-oxo-1-pyrrolidinyl）-benzoic acid, named pistaciamide on the basis of the 1D-NMR, D...A new N-phenyl-pyrrolidone derivative had been isolated from Pistacia chinesis Bunge. Its structure was elucidated as 4-hydroxy-5-（2-oxo-1-pyrrolidinyl）-benzoic acid, named pistaciamide on the basis of the 1D-NMR, DEPT, HMQC and HMBC spectroscopic techniques. 2007 Xi Kui Liu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
The molar enthalpies of dissolution for 2-（dinitromethylene）-5-methyl-1,3-diazacyclopentane（DNMDZ） in dimethyl sulfoxide（DMSO） and N-methyl pyrrolidone（NMP） were measured using an RD496-2000 Calvet microcalori...The molar enthalpies of dissolution for 2-（dinitromethylene）-5-methyl-1,3-diazacyclopentane（DNMDZ） in dimethyl sulfoxide（DMSO） and N-methyl pyrrolidone（NMP） were measured using an RD496-2000 Calvet microcalorimeter at 298.15 K under atmospheric pressure.Empirical formulae for the calculation of the molar enthalpies of dissolution（Δ diss H） were obtained from the experimental data of the dissolution processes of DNMDZ in DMSO or NMP.The relationships between the rate constant（k） and the molality（b） and between the reaction order（n） and the molality（b） were determined.The corresponding kinetic equations describing the two dissolution processes were dα/dt=10^-2.16（1-α） ^1.01 for the dissolution of DNMDZ in DMSO,and dα/dt=10^-2.02（1-α）^ 0.85 for the dissolution of DNMDZ in NMP,respectively.展开更多
The crystallization behavior of polyamide 6,6(PA66) under complex flow field is of great importance for its final mechanical properties.Poly(vinyl pyrrolidone)(PVP) was applied as crystallization modifying agency to i...The crystallization behavior of polyamide 6,6(PA66) under complex flow field is of great importance for its final mechanical properties.Poly(vinyl pyrrolidone)(PVP) was applied as crystallization modifying agency to improve processability of PA66.The regulation nature on hydrogen bonds(H-bonds) interaction of PVP was studied upon cooling process.As revealed by in situ FTIR,the sample with 5 wt% PVP displays decreased enthalpy change(ΔH) for both the generation of H-bonds and the transition of H-bonds from “disordered” to “ordered” state,which illustrates the molecular mechanism for the regulation of crystallzation behavior.Moveover,2D-WAXD is applied to reveal the evolution of microstructure for sample under external injection field.Hermans orientation factor(f_(H)) decreases obviously with the addition of PVP,because the relaxation of chain segments is promoted as well the crystallization is retarded.The above crystallization and microstructure changes during the processing provokes the improvement of processability without the apparent sacrifice of mechanical properties.展开更多
Polyvinylidene fluoride （PVDF） hollow fiber membranes prepared from spinning solutions with different polyvinyl pyrrolidone （PVP） contents （1% and 5%） at different extrusion rates were obtained by wet/dry phase ...Polyvinylidene fluoride （PVDF） hollow fiber membranes prepared from spinning solutions with different polyvinyl pyrrolidone （PVP） contents （1% and 5%） at different extrusion rates were obtained by wet/dry phase process keeping all other spinning parameters constant. In spinning these PVDF hollow fibers, dimethylacetamide （DMAc） and PVP were used as a solvent and an additive, respectively. Water was used as the inner coagulant. Dimethylformamide （DMF） and water （30/70） were used as the external coagulant. The performances of membranes were characterized in terms of water flux, solute rejection for the wet membranes. The structure and morphology of PVDF hollow fiber were examined by BET adsorption, dry/wet weight method and scanning electron microscopy （SEM）. It is found that the increase in PVP content and extrusion rate of spinning solution can result in the increase of water flux and decrease of solute rejection. The improvements of interconnected porous structure and pore size are induced by shear-thinning behavior of spinning solution at high extrusion rates, which could result in the increase of water flux of hollow fiber membranes. The increase of extrusion rate also leads to the increase of membrane thickness due to the recovery effect of elastic property of polymer chains.展开更多
Natural moisturizing factor(NMF)in the stratum corneum contributes to the retention of moisture there.The purpose of this study was to determine the penetration of ions in Shotokuseki extract(SE)into the three-dimensi...Natural moisturizing factor(NMF)in the stratum corneum contributes to the retention of moisture there.The purpose of this study was to determine the penetration of ions in Shotokuseki extract(SE)into the three-dimensional cultured epidermis and the effect of NMF on the biosynthesis of amino acids and pyrrolidone carboxylic acid formation.Vari-ous ions,amino acids and pyrrolidone carboxylic acid were quantified by inductively coupled plasma mass spectrom-etry,fully automatic amino acid analyzer or high-performance liquid chromatography(HPLC)in three-dimensional cultured epidermis after application of SE.Gene expression levels of profilaggrin,calpain1,caspase14,and bleomycin hydrolase,which are involved in NMF production,were determined by reverse-transcription qPCR and bleomycin hydrolase activity was determined by aminopeptidase assay.The application of SE increased Na,K,Mg,Ca,Al,and Fe levels in three-dimensional cultured epidermis.The mRNA levels of the starting material of amino acid synthesis profilaggrin,and calpain1 and bleomycin hydrolase,which are involved in its fragmentation,increased.The activity of bleomycin hydrolase also increased.Furthermore,the levels of amino acids and pyrrolidone carboxylic acid increased in the three-dimensional cultured epidermis.This suggests that the ionic composition of SE may be involved in its moisturizing effect on the stratum corneum.展开更多
Poly(p-phenylene terephthalamide)(PPTA)pulp was prepared by polycondensation of the p-phenylene diamine(PPDA)with terephthaloyl chloride(TPC)in the completely anhydrous solvent system of N-methyl pyrrolidone(NMP)havin...Poly(p-phenylene terephthalamide)(PPTA)pulp was prepared by polycondensation of the p-phenylene diamine(PPDA)with terephthaloyl chloride(TPC)in the completely anhydrous solvent system of N-methyl pyrrolidone(NMP)having calcium chloride,in the presence of poly(vinyl pyrrolidone)(PVP)having a viscosity average molecular weight lower than 40 000.It was confirmed that the polycondensation could be accelerated,the inherent viscosity of the polymer could be increased,and the polymers could be fibrillated more easily by the addition of the PVP.FTIR and X-ray spectra proved that PVP had not combined into molecular chains of the resultant PPTA pulps.The morphology of the resultant pulps,the effect of viscosity average molecular weight,amount and adding mode of PVP on inherent viscosity,specific surface area,and mean length of the resultant pulps were discussed in detail.And the friction and wear properties of the compound reinforced by the resultant pulps were simply investigated.展开更多
We presented a simple yet convenient hydrothermal approach for the large-scale synthesis of uniform cylindrical silver (Ag) single-crystalline nanowires with diameters of about 25 nm and lengths of 1-4 μm. Poly(vinyl...We presented a simple yet convenient hydrothermal approach for the large-scale synthesis of uniform cylindrical silver (Ag) single-crystalline nanowires with diameters of about 25 nm and lengths of 1-4 μm. Poly(vinyl pyrrolidone) (PVP) was used as a reducing agent, and AgCl was used as a precursor to deliberately control [Ag^+] at a low degree in the overall reaction process through its dynamic equilibrium by directly reducing AgCl with PVP at a quasi-equilibrium growth condition. The as-obtained products were characterized by powder X-ray diffraction (XRD) patterns, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), infrared spectra (IR) and Raman spectra. Factors such as [PVP], reaction temperature, time, and species of reducing agents and precursors were investigated to have strong influences on the morphologies and structures of the resultant Ag nanostructures. The wire diameter can conveniently be adjusted between 25 and 50 nm by simply adjusting [PVP], reaction temperature and reducing agent species. The as-synthesized silver nanowires can be self-assembled into perfect order arrays after being dried on tin foil due to the PVP coating on the surface, the circular cross-section and the uniform diameter of the Ag nanowires. These special silver nanowires with a core-shell structure as well as their spontaneous self-assembly of order arrays are expected to provide potential applications in flexible conductors, dielectric materials, electromagnetic shielding materials and nano-devices.展开更多
Catalyst plays an important role in the dehydration of N-（hydroxylethyl）pyrrolidone （NHP） to prepare N-vinyl-pyrrolidone （NVP）. At present, NVP yield is only about 30% on commercial ZrO2 catalyst. A coupled prec...Catalyst plays an important role in the dehydration of N-（hydroxylethyl）pyrrolidone （NHP） to prepare N-vinyl-pyrrolidone （NVP）. At present, NVP yield is only about 30% on commercial ZrO2 catalyst. A coupled precipitation and solid dispersion technique was designed to prepare the nano-ZrO2 catalyst, in which rare earth metal oxides （REOx） was used as electronic promoter. The results indicated that the catalyst doped REOx （S-1.0） exhibits the optimum performance of NHP dehydration at moderate conditions. NHP conversion and NVP selectivity are respectively 97.0%, 82.3%. Of special interest is that the indexes of the catalyst （S-1.0-1.0） are up to 98.4% and 89.2% respectively. Furthermore, this catalyst bears the good stability. It means that nano-ZrO2 doped REOx catalyst might be a potential commercial catalyst for the NHP dehydration.展开更多
A novel nanofiber composite poly(N-isopropylacrylamide)(PNIPAAm)/polyvinyl pyrrolidone(PVP)was successfully prepared by electrospinning.Analogous medicated fibers loaded with ketoprofen(KET)as a model drug were prepar...A novel nanofiber composite poly(N-isopropylacrylamide)(PNIPAAm)/polyvinyl pyrrolidone(PVP)was successfully prepared by electrospinning.Analogous medicated fibers loaded with ketoprofen(KET)as a model drug were prepared.X-ray diffraction(XRD)demonstrated that the drug was presented in the fibers with an amorphous form.Both scanning and transmission electron microscopy showed that the fibers had an even diameter and smooth surface,and no phase separation was observed.The KET loaded nanofibers did not affect the morphology of the fibers,and no drug aggregation was separated from the polymer fibers.Water contact angle measurements proved that the PNIPAAm/PVP fibers switched from hydrophilic to hydrophobic when the temperature increased the lower critical solution temperature of 32℃.In vitro drug release studies were also undertaken and the result indicated that the PNIPAAm/PVP blend nanofiber presented the properties of the two polymers,having temperature-sensitive systems with sustained release properties.In addition,MTT assay demonstrated that the nanofiber film was non-toxic and suitable for cell growth.Thus,the nanofiber can be used as thermoresponsive carriers for sustained release of poor water soluble drugs.展开更多
In this study sodium alginate (NaAlg)/poly (vinyl pyrrolidone) (PVP) blend membranes were prepared and crosslinked with CaCl2 (0.1 Molarity (M)) for the separation of aqueous/dimethylformamide (DMF) mixtures. Membrane...In this study sodium alginate (NaAlg)/poly (vinyl pyrrolidone) (PVP) blend membranes were prepared and crosslinked with CaCl2 (0.1 Molarity (M)) for the separation of aqueous/dimethylformamide (DMF) mixtures. Membranes were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and their performance was examined by varying experimental parameters such as feed composition (0 - 100 wt%), operating temperature (30℃ - 50℃) and membrane thickness (30 - 90 micrometer (μm)). Blending NaAlg with PVP, decreased separation factor whereas increased the permeation rate as the permeation temperature was increased in Vapor Permeation (VP) and Vapor Permeation with Temperature Difference (TDVP) methods. In the TDVP method, the separation factors increased and the permeation rates decreased as the temperature of the membrane surrounding is decreased. The highest separation factor of 60 was obtained in TDVP method for 90 wt% DMF concentration in the feed.展开更多
Polymers have complex molecular structures that often lead to interchain friction and hinder movement,making it difficult to achieve superlubricity.However,in the field of hydration lubrication,the electronegative int...Polymers have complex molecular structures that often lead to interchain friction and hinder movement,making it difficult to achieve superlubricity.However,in the field of hydration lubrication,the electronegative interface of ceramics readily adsorbs water molecules,creating a protective water film that covers the frictional interface and effectively reduces friction.To achieve hydration lubrication,it is essential to create a continuous lubricating film by selectively enriching specific functional groups of adsorbed water molecules from the polymer solution onto the ceramic surface.By adsorbing a hydrophilic layer composed of polyvinylpyrrolidone with pyrrolidone groups onto a negatively charged Si_(3)N_(4)/sapphire interface,we formed a continuous lubricating film.Research has shown that the interaction between the polymer chain structure of polyvinylpyrrolidone molecules(such as PVP10000)in solution and water molecules could result in excellent superlubricity.When the contact pressure exceeds 198 MPa,the coefficients of friction(COF)can be reduced to 0.004-0.007.Through detailed surface analyses and sophisticated simulations,we uncovered the underlying mechanism involved.The pyrrolidone moieties of polyvinyl pyrrolidone(PVP)formed hydrogen bonds with the Si_(3)N_(4) surface,transforming the initially difficult frictional interface into a PVP/sapphire interface with significantly reduced sliding energy barriers.These findings highlight the vital role of PVP in superlubricity and hydration lubrication and provide a theoretical and experimental basis for the design of materials and lubricants with exceptional lubricating properties.展开更多
This study describes a method for solution casting of polyvinyl pyrrolidone(PVP)reinforced with 0 wt.%,1 wt.%,3 wt.%,and 5 wt.%zinc selenide(ZnSe).After production,scanning electron microscopy(SEM)was used to examine ...This study describes a method for solution casting of polyvinyl pyrrolidone(PVP)reinforced with 0 wt.%,1 wt.%,3 wt.%,and 5 wt.%zinc selenide(ZnSe).After production,scanning electron microscopy(SEM)was used to examine the nanocomposite surfaces,and thus confirmed the constant dispersion of ZnSe nanoparticles(NPs)within PVP.Subsequent Fourier transformation infrared spectroscopy(FTIR)analysis showed that the ZnSe NPs and PVP matrix interacted physically.Analysis of the optical properties of PVP–ZnSe nanocomposites showed that increased ZnSe NPs concentration in the PVP solution increased absorbance and decreased transmittance.Further integration of ZnSe NPs at a concentration of 6 wt.%within the PVP–ZnSe nanocomposite resulted in a decrease in the energy gap.Specifically,we observed a decrease in the energy gap from 4 to 3.1 eV for the allowed indirect transition and from 3.94 to 2.9 eV for the forbidden indirect transition.Overall,the weight percentage of ZnSe NPs demonstrates a direct relationship with their absorption factor,extinction factor,index of refraction,real and imaginary components of dielectric constants,and optical conductivity.These results indicate that PVP–ZnSe nanocomposites possess exceptional optical capabilities,and may be suitable for use in photodetector applications,especially as ultraviolet(UV)detectors.展开更多
Pyrrole is a heterocycle with four carbon atoms and a nitrogen atom,which is extensively used in the pesticide and pharmaceutical industries.In addition,it has a series of analogs such as pyrrolidine,pyrroline,and pyr...Pyrrole is a heterocycle with four carbon atoms and a nitrogen atom,which is extensively used in the pesticide and pharmaceutical industries.In addition,it has a series of analogs such as pyrrolidine,pyrroline,and pyrrolidone.Pesticides containing pyrrole and its analogs have been formally marketed as fungicides,including fenpiclonil,fludioxonil,the insecticide chlorfenapyr,and the herbicide fluorochloridone.In this paper,we analyze the structure-activity relationships(SARs)of pesticides containing these structures.We summarize the characteristics possessed by the most highly active pyrrole and its analogs and provide an overview of research on pyrrole compounds with insecticidal,antimicrobial,herbicidal,and antiviral properties in the past 20 years.It is hoped to provide ideas for the development and design of this type compounds in pesticides and to assist researchers in this area.展开更多
This study focused on the production of polypropylene(PP)/silver(Ag)composites via additive manufacturing.This study aimed to enhance the quality of medical-grade PP in material extrusion(MEX)three-dimensional printin...This study focused on the production of polypropylene(PP)/silver(Ag)composites via additive manufacturing.This study aimed to enhance the quality of medical-grade PP in material extrusion(MEX)three-dimensional printing(3DP)by improving its mechanical properties while simultaneously adding antibacterial properties.The latter can find extremely important and versatile properties that are applicable in defense and security domains.PP/Ag nanocomposites were prepared using a novel method based on a reaction occurring while mixing appropriate quantities of the starting polymers and additives,namely polyvinylpyrrolidone(PVP)as the matrix material and silver nitrate(AgNO_(3))as the filler.This process produced three-dimensional(3D)printed filaments,which were then used to create specimens for a series of standardized tests.It was found that the mechanical properties of the nanocomposites were enhanced in relation to pristine PP,especially for the PP matrix with various loadings of AgNO_(3)and PVP,such as 5.0 wt%and 2.5 wt%,respectively.The voids,inclusions,and actual-to-nominal dimensions also showed improved results.The 3DP specimens exhibited a more effective biocidal performance against Staphylococcus aureus than Escherichia coli,which developed an inhibition zone only in the case of PP with filler loading percentages of AgNO_(3)and PVP at 10.0 wt%and 5.0 wt%,respectively Compounds possessing such properties can be beneficial for various applications requiring increased mechanical properties and biocidal capabilities,such as in the Defence or medical industries.展开更多
To evaluate the stability of N-alkylated pyrrolidone derivatives （NRPs）, which are supposed to be used as precipitants for U（VI） and Pu（IV, VI） species in HNO3 media, under irradiation environment, some candidat...To evaluate the stability of N-alkylated pyrrolidone derivatives （NRPs）, which are supposed to be used as precipitants for U（VI） and Pu（IV, VI） species in HNO3 media, under irradiation environment, some candidate NRPs were irradiated by γ-ray. Irradia- tion to HNO3 solutions up to 6 mol dm-3 （= M） containing 2 M N-n-butyl-2-pyrrolidone （NBP）, one of NRPs with lower hy- drophobicity, has revealed that the residual ratios of NBP in the samples of HNO3 up to 3 M decreased identically and linearly. Approximately 20% of NBP was found to be degraded after the irradiation at 1 MGy. It was also found that the decrease in the precipitation ratio of UOf＋ （P.R., %） was gentle and that the P.R. values were relatively in accordance with the residual ratios of NBP. On the other hand, the degradation of the samples irradiated in 6 M HNO3 was found more distinguished. It was pro- posed from the analyses of degraded compounds that the degradation of NBP in HNO3 by γ-ray irradiation started from the cleavage of the pyrrolidone ring by the addition of oxygen atom originating from HNO3, followed by the formation of chain compounds by the successive addition of oxygen, leading to the generation of oxalic acid and acetic acid. The stability of other NRPs in 3 M HNO3 was evaluated to be nearly identical with that of NBP except lower P.R. values of the samples containing NRPs with higher hydrophobicity irradiated at more than 0.5 MGy.展开更多
Silver nanoparticles(AgNPs)synthesized using tartaric acid as a capping agent have a great impact on the reaction kinetics and contribute significantly to the stability of AgNPs.The protective layer formed by tartaric...Silver nanoparticles(AgNPs)synthesized using tartaric acid as a capping agent have a great impact on the reaction kinetics and contribute significantly to the stability of AgNPs.The protective layer formed by tartaric acid is an important factor that protects the silver surface and reduces potential cytotoxicity problems.These attributes are critical for assessing the compatibility of AgNPs with biological systems and making them suitable for drug delivery applications.The aim of this research is to conduct a comprehensive study of the effect of tartaric acid concentration,sonication time and temperature on the formation of silver nanoparticles.Using Response Surface Methodology(RSM)with Face-Centered Central Composite Design(FCCD),the optimization process identifies the most favorable synthesis conditions.UV-Vis spectrum regression analysis shows that AgNPs stabilized with tartaric acid are more stable than AgNPs without tartaric acid.This highlights the increased stability that tartaric acid provides in AgNP ssssynthesis.Particle size distribution analysis showed a multimodal distribution for AgNPs with tartaric acid and showed the smallest size peak with an average size of 20.53 nm.The second peak with increasing intensity shows a dominant average size of 108.8 nm accompanied by one standard deviation of 4.225 nm and a zeta potential of−11.08 mV.In contrast,AgNPs synthesized with polyvinylpyrrolidone(PVP)showed a unimodal particle distribution with an average particle size of 81.62 nm and a zeta potential of−2.96 mV.The more negative zeta potential of AgNP-tartaric acid indicates its increased stability.Evaluation of antibacterial activity showed that AgNPs stabilized with tartaric acid showed better performance against E.coli and B.subtilis bacteria compared with AgNPs-PVP.In summary,this study highlights the potential of tartaric acid in AgNP synthesis and suggests an avenue for the development of stable AgNPs with versatile applications.展开更多
β-Cyclodextrin( β-CyD) is cyclic oligosaccharide of a glucopyranose, containing a relatively hydrophobic central cavity and hydrophilic outer surface. However, the usefulness of β-CyD is limited owing to its low aq...β-Cyclodextrin( β-CyD) is cyclic oligosaccharide of a glucopyranose, containing a relatively hydrophobic central cavity and hydrophilic outer surface. However, the usefulness of β-CyD is limited owing to its low aqueous solubility whereas we found that its apparent high solubility was evident in some injectable solvents including 2-pyrrolidone(PYR), Nmethyl pyrrolidone(NMP) and dimethyl sulfoxide(DMSO). Therefore, in the present study, the physicochemical properties of the 30–60% w/w β-CyD in PYR, NMP and DMSO were investigated such as viscosity, water resistant, matrix formation rate and syringeability. The higher the concentration of β-CyD resulted in the increased viscosity and the higher force and energy of syringeability. β-CyD in PYR gave the highest viscosity which contributed to the lowest syringeability while β-CyD in DMSO exhibited the highest syringeability. The β-CyD in DMSO and NMP exhibited the higher rate of matrix formation. β-CyD in PYR showed the highest water resistant for phase separation while β-CyD in NMP gave the faster de-mixing rate compared to that from PYR. The difference in physicochemical properties of β-CyD dried ppts studied by scanning electron microscope(SEM), differential scanning calorimetry(DSC), X-ray diffraction(XRD), Fourier-transform infrared spectroscopy(FT-IR) and thermogravimetric analysis(TGA) revealed that there was partial complexation of β-CyD with respective solvents. Both solution and precipitate characteristic properties will be useful for using β-CyD in further investigation as matrix material dissolved in the injectable vehicles as the in situ forming gel for periodontitis treatment.展开更多
N-methyl pyrrolidone,hydrochloric acid and thiourea dioxide were adopted as the raw material,and 4-methyl guanidine butyric acid was synthesized through two-step reaction.The optimum synthesis condition for the first ...N-methyl pyrrolidone,hydrochloric acid and thiourea dioxide were adopted as the raw material,and 4-methyl guanidine butyric acid was synthesized through two-step reaction.The optimum synthesis condition for the first step was as follows：n（N-methyl pyrrolidone）∶n（10% HCl）= 1∶2.0,reaction temperature 135 ℃,reaction time 5 h;at that moment,the yield of intermediate 4-methyl-amino butyric acid hydrochloride was 72.89%.The optimum synthesis condition for the second step was as follows：n（4-methyl-amino butyric acid hydrochloride）∶n（thiourea dioxide）= 1∶2.0,reaction temperature 25 ℃,reaction time 12 h,at that moment,the yield of target product was 82.68%.Structure characterization on the intermediates and the target products were carried out through Fourier transform infrared spectroscopy and elemental analysis.展开更多
基金financially supported by the National Natural Science Foundation of China(No.81903461)the Natural Science Foundation of Hubei Province(No.ZRMS2023000340).
文摘Objective This study aimed to design and evaluate the efficacy of pyrrolidone derivatives as potential therapeutic agents against diffuse large B-cell lymphoma(DLBCL),a common and heterogeneous malignancy of the adult lymphohematopoietic system.Given the limitations of current therapies,there is a pressing need to develop new and effective drugs for DLBCL treatment.Methods A series of pyrrolidone derivatives were synthesized,and their antitumor activities were assessed,particularly against DLBCL cell lines.Structure-activity relationship(SAR)analysis was conducted to identify key structural components essential for activity.The most promising compound,referred to as compound 7,was selected for further mechanistic studies.The expression levels of relevant mRNA and protein were detected by RT-qPCR and Western blotting,and the expression of mitochondrial membrane potential and ROS was detected using flow cytometry for further assessment of cell cycle arrest and apoptosis.Results The compound 7 exhibited good antitumor activity among the synthesized derivatives,specifically in DLBCL cell lines.SAR analysis highlighted the critical role ofα,β-unsaturated ketones in the antitumor efficacy of these compounds.Mechanistically,compound 7 was found to induce significant DNA damage,trigger an inflammatory response,cause mitochondrial dysfunction,and disrupt cell cycle progression,ultimately leading to apoptosis of DLBCL cells.Conclusion The compound 7 has good antitumor activity and can induce multiple cellular mechanisms leading to cancer cell death.These findings warrant further investigation of the compound 7 as a potential therapeutic agent for DLBCL.
基金This work was supported by the Natural Science Foundation of Yunnan Province of China （No. 2005B0049M）.
文摘A new N-phenyl-pyrrolidone derivative had been isolated from Pistacia chinesis Bunge. Its structure was elucidated as 4-hydroxy-5-（2-oxo-1-pyrrolidinyl）-benzoic acid, named pistaciamide on the basis of the 1D-NMR, DEPT, HMQC and HMBC spectroscopic techniques. 2007 Xi Kui Liu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
基金Supported by the Science and Technology Foundation of the Science and Technology on Combustion and Explosion Laboratory of Xi’an Modern Chemistry Research Institute,China(No.9140C35030112OC3501)
文摘The molar enthalpies of dissolution for 2-（dinitromethylene）-5-methyl-1,3-diazacyclopentane（DNMDZ） in dimethyl sulfoxide（DMSO） and N-methyl pyrrolidone（NMP） were measured using an RD496-2000 Calvet microcalorimeter at 298.15 K under atmospheric pressure.Empirical formulae for the calculation of the molar enthalpies of dissolution（Δ diss H） were obtained from the experimental data of the dissolution processes of DNMDZ in DMSO or NMP.The relationships between the rate constant（k） and the molality（b） and between the reaction order（n） and the molality（b） were determined.The corresponding kinetic equations describing the two dissolution processes were dα/dt=10^-2.16（1-α） ^1.01 for the dissolution of DNMDZ in DMSO,and dα/dt=10^-2.02（1-α）^ 0.85 for the dissolution of DNMDZ in NMP,respectively.
基金financially supported by the materials project (No.104)。
文摘The crystallization behavior of polyamide 6,6(PA66) under complex flow field is of great importance for its final mechanical properties.Poly(vinyl pyrrolidone)(PVP) was applied as crystallization modifying agency to improve processability of PA66.The regulation nature on hydrogen bonds(H-bonds) interaction of PVP was studied upon cooling process.As revealed by in situ FTIR,the sample with 5 wt% PVP displays decreased enthalpy change(ΔH) for both the generation of H-bonds and the transition of H-bonds from “disordered” to “ordered” state,which illustrates the molecular mechanism for the regulation of crystallzation behavior.Moveover,2D-WAXD is applied to reveal the evolution of microstructure for sample under external injection field.Hermans orientation factor(f_(H)) decreases obviously with the addition of PVP,because the relaxation of chain segments is promoted as well the crystallization is retarded.The above crystallization and microstructure changes during the processing provokes the improvement of processability without the apparent sacrifice of mechanical properties.
基金supported by Hitachi Plant Technologies,Ltd.and Hitachi Ltd.(China),State key laboratory of hydraulics and mountain river engineering in Sichuan University
文摘Polyvinylidene fluoride （PVDF） hollow fiber membranes prepared from spinning solutions with different polyvinyl pyrrolidone （PVP） contents （1% and 5%） at different extrusion rates were obtained by wet/dry phase process keeping all other spinning parameters constant. In spinning these PVDF hollow fibers, dimethylacetamide （DMAc） and PVP were used as a solvent and an additive, respectively. Water was used as the inner coagulant. Dimethylformamide （DMF） and water （30/70） were used as the external coagulant. The performances of membranes were characterized in terms of water flux, solute rejection for the wet membranes. The structure and morphology of PVDF hollow fiber were examined by BET adsorption, dry/wet weight method and scanning electron microscopy （SEM）. It is found that the increase in PVP content and extrusion rate of spinning solution can result in the increase of water flux and decrease of solute rejection. The improvements of interconnected porous structure and pore size are induced by shear-thinning behavior of spinning solution at high extrusion rates, which could result in the increase of water flux of hollow fiber membranes. The increase of extrusion rate also leads to the increase of membrane thickness due to the recovery effect of elastic property of polymer chains.
文摘Natural moisturizing factor(NMF)in the stratum corneum contributes to the retention of moisture there.The purpose of this study was to determine the penetration of ions in Shotokuseki extract(SE)into the three-dimensional cultured epidermis and the effect of NMF on the biosynthesis of amino acids and pyrrolidone carboxylic acid formation.Vari-ous ions,amino acids and pyrrolidone carboxylic acid were quantified by inductively coupled plasma mass spectrom-etry,fully automatic amino acid analyzer or high-performance liquid chromatography(HPLC)in three-dimensional cultured epidermis after application of SE.Gene expression levels of profilaggrin,calpain1,caspase14,and bleomycin hydrolase,which are involved in NMF production,were determined by reverse-transcription qPCR and bleomycin hydrolase activity was determined by aminopeptidase assay.The application of SE increased Na,K,Mg,Ca,Al,and Fe levels in three-dimensional cultured epidermis.The mRNA levels of the starting material of amino acid synthesis profilaggrin,and calpain1 and bleomycin hydrolase,which are involved in its fragmentation,increased.The activity of bleomycin hydrolase also increased.Furthermore,the levels of amino acids and pyrrolidone carboxylic acid increased in the three-dimensional cultured epidermis.This suggests that the ionic composition of SE may be involved in its moisturizing effect on the stratum corneum.
文摘Poly(p-phenylene terephthalamide)(PPTA)pulp was prepared by polycondensation of the p-phenylene diamine(PPDA)with terephthaloyl chloride(TPC)in the completely anhydrous solvent system of N-methyl pyrrolidone(NMP)having calcium chloride,in the presence of poly(vinyl pyrrolidone)(PVP)having a viscosity average molecular weight lower than 40 000.It was confirmed that the polycondensation could be accelerated,the inherent viscosity of the polymer could be increased,and the polymers could be fibrillated more easily by the addition of the PVP.FTIR and X-ray spectra proved that PVP had not combined into molecular chains of the resultant PPTA pulps.The morphology of the resultant pulps,the effect of viscosity average molecular weight,amount and adding mode of PVP on inherent viscosity,specific surface area,and mean length of the resultant pulps were discussed in detail.And the friction and wear properties of the compound reinforced by the resultant pulps were simply investigated.
基金Funded in Part by the National Natural Science Foundation of China(No.51521001)the Chunhui Program of the Ministry of Education of the People’s Republic of China(No.Z2015040)the Natural Science Foundation of Qinghai Province(No.2015-ZJ-946Q)。
文摘We presented a simple yet convenient hydrothermal approach for the large-scale synthesis of uniform cylindrical silver (Ag) single-crystalline nanowires with diameters of about 25 nm and lengths of 1-4 μm. Poly(vinyl pyrrolidone) (PVP) was used as a reducing agent, and AgCl was used as a precursor to deliberately control [Ag^+] at a low degree in the overall reaction process through its dynamic equilibrium by directly reducing AgCl with PVP at a quasi-equilibrium growth condition. The as-obtained products were characterized by powder X-ray diffraction (XRD) patterns, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), infrared spectra (IR) and Raman spectra. Factors such as [PVP], reaction temperature, time, and species of reducing agents and precursors were investigated to have strong influences on the morphologies and structures of the resultant Ag nanostructures. The wire diameter can conveniently be adjusted between 25 and 50 nm by simply adjusting [PVP], reaction temperature and reducing agent species. The as-synthesized silver nanowires can be self-assembled into perfect order arrays after being dried on tin foil due to the PVP coating on the surface, the circular cross-section and the uniform diameter of the Ag nanowires. These special silver nanowires with a core-shell structure as well as their spontaneous self-assembly of order arrays are expected to provide potential applications in flexible conductors, dielectric materials, electromagnetic shielding materials and nano-devices.
文摘Catalyst plays an important role in the dehydration of N-（hydroxylethyl）pyrrolidone （NHP） to prepare N-vinyl-pyrrolidone （NVP）. At present, NVP yield is only about 30% on commercial ZrO2 catalyst. A coupled precipitation and solid dispersion technique was designed to prepare the nano-ZrO2 catalyst, in which rare earth metal oxides （REOx） was used as electronic promoter. The results indicated that the catalyst doped REOx （S-1.0） exhibits the optimum performance of NHP dehydration at moderate conditions. NHP conversion and NVP selectivity are respectively 97.0%, 82.3%. Of special interest is that the indexes of the catalyst （S-1.0-1.0） are up to 98.4% and 89.2% respectively. Furthermore, this catalyst bears the good stability. It means that nano-ZrO2 doped REOx catalyst might be a potential commercial catalyst for the NHP dehydration.
基金Science and Technology Commission of Shanghai Municipality,China(No.16410723700)"111 Project"Biomedical Textile Materials Science and Technology,China(No.B07024)UK-China Joint Laboratory for Therapeutic Textiles Based at Donghua University
文摘A novel nanofiber composite poly(N-isopropylacrylamide)(PNIPAAm)/polyvinyl pyrrolidone(PVP)was successfully prepared by electrospinning.Analogous medicated fibers loaded with ketoprofen(KET)as a model drug were prepared.X-ray diffraction(XRD)demonstrated that the drug was presented in the fibers with an amorphous form.Both scanning and transmission electron microscopy showed that the fibers had an even diameter and smooth surface,and no phase separation was observed.The KET loaded nanofibers did not affect the morphology of the fibers,and no drug aggregation was separated from the polymer fibers.Water contact angle measurements proved that the PNIPAAm/PVP fibers switched from hydrophilic to hydrophobic when the temperature increased the lower critical solution temperature of 32℃.In vitro drug release studies were also undertaken and the result indicated that the PNIPAAm/PVP blend nanofiber presented the properties of the two polymers,having temperature-sensitive systems with sustained release properties.In addition,MTT assay demonstrated that the nanofiber film was non-toxic and suitable for cell growth.Thus,the nanofiber can be used as thermoresponsive carriers for sustained release of poor water soluble drugs.
基金Gazi University Research Fund for the support of this study.
文摘In this study sodium alginate (NaAlg)/poly (vinyl pyrrolidone) (PVP) blend membranes were prepared and crosslinked with CaCl2 (0.1 Molarity (M)) for the separation of aqueous/dimethylformamide (DMF) mixtures. Membranes were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and their performance was examined by varying experimental parameters such as feed composition (0 - 100 wt%), operating temperature (30℃ - 50℃) and membrane thickness (30 - 90 micrometer (μm)). Blending NaAlg with PVP, decreased separation factor whereas increased the permeation rate as the permeation temperature was increased in Vapor Permeation (VP) and Vapor Permeation with Temperature Difference (TDVP) methods. In the TDVP method, the separation factors increased and the permeation rates decreased as the temperature of the membrane surrounding is decreased. The highest separation factor of 60 was obtained in TDVP method for 90 wt% DMF concentration in the feed.
基金supported by the National Natural Science Foundation of China(Nos.52275203 and 52105194)the China Postdoctoral Science Special Funding Project(No.2022T150353)the Tribology Science Fund of the State Key Laboratory of Tribology in Advanced Equipment(Nos.SKLTKF23A03 and SKLTKF23A04).
文摘Polymers have complex molecular structures that often lead to interchain friction and hinder movement,making it difficult to achieve superlubricity.However,in the field of hydration lubrication,the electronegative interface of ceramics readily adsorbs water molecules,creating a protective water film that covers the frictional interface and effectively reduces friction.To achieve hydration lubrication,it is essential to create a continuous lubricating film by selectively enriching specific functional groups of adsorbed water molecules from the polymer solution onto the ceramic surface.By adsorbing a hydrophilic layer composed of polyvinylpyrrolidone with pyrrolidone groups onto a negatively charged Si_(3)N_(4)/sapphire interface,we formed a continuous lubricating film.Research has shown that the interaction between the polymer chain structure of polyvinylpyrrolidone molecules(such as PVP10000)in solution and water molecules could result in excellent superlubricity.When the contact pressure exceeds 198 MPa,the coefficients of friction(COF)can be reduced to 0.004-0.007.Through detailed surface analyses and sophisticated simulations,we uncovered the underlying mechanism involved.The pyrrolidone moieties of polyvinyl pyrrolidone(PVP)formed hydrogen bonds with the Si_(3)N_(4) surface,transforming the initially difficult frictional interface into a PVP/sapphire interface with significantly reduced sliding energy barriers.These findings highlight the vital role of PVP in superlubricity and hydration lubrication and provide a theoretical and experimental basis for the design of materials and lubricants with exceptional lubricating properties.
文摘This study describes a method for solution casting of polyvinyl pyrrolidone(PVP)reinforced with 0 wt.%,1 wt.%,3 wt.%,and 5 wt.%zinc selenide(ZnSe).After production,scanning electron microscopy(SEM)was used to examine the nanocomposite surfaces,and thus confirmed the constant dispersion of ZnSe nanoparticles(NPs)within PVP.Subsequent Fourier transformation infrared spectroscopy(FTIR)analysis showed that the ZnSe NPs and PVP matrix interacted physically.Analysis of the optical properties of PVP–ZnSe nanocomposites showed that increased ZnSe NPs concentration in the PVP solution increased absorbance and decreased transmittance.Further integration of ZnSe NPs at a concentration of 6 wt.%within the PVP–ZnSe nanocomposite resulted in a decrease in the energy gap.Specifically,we observed a decrease in the energy gap from 4 to 3.1 eV for the allowed indirect transition and from 3.94 to 2.9 eV for the forbidden indirect transition.Overall,the weight percentage of ZnSe NPs demonstrates a direct relationship with their absorption factor,extinction factor,index of refraction,real and imaginary components of dielectric constants,and optical conductivity.These results indicate that PVP–ZnSe nanocomposites possess exceptional optical capabilities,and may be suitable for use in photodetector applications,especially as ultraviolet(UV)detectors.
基金financial support from the National Natural Science Foundation of China(No.32072445)the Science and Technology Plan Project of Guizhou Province(Qiankehezhicheng[2024]the general 083)+5 种基金the Program of Introducing Talents to Chinese Universities(No.D20023)the Central Government Guides Local Science and Technology Development Fund Projects(Qiankehezhongyindi(2023)001)Key Agricultural Technology R&D Projects of the Xinjiang Production and Construction Corps(NYHXGG,2023AA602)the Frontiers Science Centre for Asymmetric Synthesis and Medicinal Molecules,Department of Education,Guizhou Province[Qianjiaohe KY(2020)004]the specific research fund of The Innovation Platform for Academicians of Hainan Province(No.SQ2020PTZ0009)。
文摘Pyrrole is a heterocycle with four carbon atoms and a nitrogen atom,which is extensively used in the pesticide and pharmaceutical industries.In addition,it has a series of analogs such as pyrrolidine,pyrroline,and pyrrolidone.Pesticides containing pyrrole and its analogs have been formally marketed as fungicides,including fenpiclonil,fludioxonil,the insecticide chlorfenapyr,and the herbicide fluorochloridone.In this paper,we analyze the structure-activity relationships(SARs)of pesticides containing these structures.We summarize the characteristics possessed by the most highly active pyrrole and its analogs and provide an overview of research on pyrrole compounds with insecticidal,antimicrobial,herbicidal,and antiviral properties in the past 20 years.It is hoped to provide ideas for the development and design of this type compounds in pesticides and to assist researchers in this area.
文摘This study focused on the production of polypropylene(PP)/silver(Ag)composites via additive manufacturing.This study aimed to enhance the quality of medical-grade PP in material extrusion(MEX)three-dimensional printing(3DP)by improving its mechanical properties while simultaneously adding antibacterial properties.The latter can find extremely important and versatile properties that are applicable in defense and security domains.PP/Ag nanocomposites were prepared using a novel method based on a reaction occurring while mixing appropriate quantities of the starting polymers and additives,namely polyvinylpyrrolidone(PVP)as the matrix material and silver nitrate(AgNO_(3))as the filler.This process produced three-dimensional(3D)printed filaments,which were then used to create specimens for a series of standardized tests.It was found that the mechanical properties of the nanocomposites were enhanced in relation to pristine PP,especially for the PP matrix with various loadings of AgNO_(3)and PVP,such as 5.0 wt%and 2.5 wt%,respectively.The voids,inclusions,and actual-to-nominal dimensions also showed improved results.The 3DP specimens exhibited a more effective biocidal performance against Staphylococcus aureus than Escherichia coli,which developed an inhibition zone only in the case of PP with filler loading percentages of AgNO_(3)and PVP at 10.0 wt%and 5.0 wt%,respectively Compounds possessing such properties can be beneficial for various applications requiring increased mechanical properties and biocidal capabilities,such as in the Defence or medical industries.
文摘To evaluate the stability of N-alkylated pyrrolidone derivatives （NRPs）, which are supposed to be used as precipitants for U（VI） and Pu（IV, VI） species in HNO3 media, under irradiation environment, some candidate NRPs were irradiated by γ-ray. Irradia- tion to HNO3 solutions up to 6 mol dm-3 （= M） containing 2 M N-n-butyl-2-pyrrolidone （NBP）, one of NRPs with lower hy- drophobicity, has revealed that the residual ratios of NBP in the samples of HNO3 up to 3 M decreased identically and linearly. Approximately 20% of NBP was found to be degraded after the irradiation at 1 MGy. It was also found that the decrease in the precipitation ratio of UOf＋ （P.R., %） was gentle and that the P.R. values were relatively in accordance with the residual ratios of NBP. On the other hand, the degradation of the samples irradiated in 6 M HNO3 was found more distinguished. It was pro- posed from the analyses of degraded compounds that the degradation of NBP in HNO3 by γ-ray irradiation started from the cleavage of the pyrrolidone ring by the addition of oxygen atom originating from HNO3, followed by the formation of chain compounds by the successive addition of oxygen, leading to the generation of oxalic acid and acetic acid. The stability of other NRPs in 3 M HNO3 was evaluated to be nearly identical with that of NBP except lower P.R. values of the samples containing NRPs with higher hydrophobicity irradiated at more than 0.5 MGy.
基金funded by the Directorate of Research and Community Service (DRPM,Direktorat Riset dan Pengabdian Kepada Masyarakat)ITS through the ITS Research Local Grant (No:1665/PKS/ITS/2023).
文摘Silver nanoparticles(AgNPs)synthesized using tartaric acid as a capping agent have a great impact on the reaction kinetics and contribute significantly to the stability of AgNPs.The protective layer formed by tartaric acid is an important factor that protects the silver surface and reduces potential cytotoxicity problems.These attributes are critical for assessing the compatibility of AgNPs with biological systems and making them suitable for drug delivery applications.The aim of this research is to conduct a comprehensive study of the effect of tartaric acid concentration,sonication time and temperature on the formation of silver nanoparticles.Using Response Surface Methodology(RSM)with Face-Centered Central Composite Design(FCCD),the optimization process identifies the most favorable synthesis conditions.UV-Vis spectrum regression analysis shows that AgNPs stabilized with tartaric acid are more stable than AgNPs without tartaric acid.This highlights the increased stability that tartaric acid provides in AgNP ssssynthesis.Particle size distribution analysis showed a multimodal distribution for AgNPs with tartaric acid and showed the smallest size peak with an average size of 20.53 nm.The second peak with increasing intensity shows a dominant average size of 108.8 nm accompanied by one standard deviation of 4.225 nm and a zeta potential of−11.08 mV.In contrast,AgNPs synthesized with polyvinylpyrrolidone(PVP)showed a unimodal particle distribution with an average particle size of 81.62 nm and a zeta potential of−2.96 mV.The more negative zeta potential of AgNP-tartaric acid indicates its increased stability.Evaluation of antibacterial activity showed that AgNPs stabilized with tartaric acid showed better performance against E.coli and B.subtilis bacteria compared with AgNPs-PVP.In summary,this study highlights the potential of tartaric acid in AgNP synthesis and suggests an avenue for the development of stable AgNPs with versatile applications.
文摘β-Cyclodextrin( β-CyD) is cyclic oligosaccharide of a glucopyranose, containing a relatively hydrophobic central cavity and hydrophilic outer surface. However, the usefulness of β-CyD is limited owing to its low aqueous solubility whereas we found that its apparent high solubility was evident in some injectable solvents including 2-pyrrolidone(PYR), Nmethyl pyrrolidone(NMP) and dimethyl sulfoxide(DMSO). Therefore, in the present study, the physicochemical properties of the 30–60% w/w β-CyD in PYR, NMP and DMSO were investigated such as viscosity, water resistant, matrix formation rate and syringeability. The higher the concentration of β-CyD resulted in the increased viscosity and the higher force and energy of syringeability. β-CyD in PYR gave the highest viscosity which contributed to the lowest syringeability while β-CyD in DMSO exhibited the highest syringeability. The β-CyD in DMSO and NMP exhibited the higher rate of matrix formation. β-CyD in PYR showed the highest water resistant for phase separation while β-CyD in NMP gave the faster de-mixing rate compared to that from PYR. The difference in physicochemical properties of β-CyD dried ppts studied by scanning electron microscope(SEM), differential scanning calorimetry(DSC), X-ray diffraction(XRD), Fourier-transform infrared spectroscopy(FT-IR) and thermogravimetric analysis(TGA) revealed that there was partial complexation of β-CyD with respective solvents. Both solution and precipitate characteristic properties will be useful for using β-CyD in further investigation as matrix material dissolved in the injectable vehicles as the in situ forming gel for periodontitis treatment.
文摘N-methyl pyrrolidone,hydrochloric acid and thiourea dioxide were adopted as the raw material,and 4-methyl guanidine butyric acid was synthesized through two-step reaction.The optimum synthesis condition for the first step was as follows：n（N-methyl pyrrolidone）∶n（10% HCl）= 1∶2.0,reaction temperature 135 ℃,reaction time 5 h;at that moment,the yield of intermediate 4-methyl-amino butyric acid hydrochloride was 72.89%.The optimum synthesis condition for the second step was as follows：n（4-methyl-amino butyric acid hydrochloride）∶n（thiourea dioxide）= 1∶2.0,reaction temperature 25 ℃,reaction time 12 h,at that moment,the yield of target product was 82.68%.Structure characterization on the intermediates and the target products were carried out through Fourier transform infrared spectroscopy and elemental analysis.
