Calculation of the neutron noise induced by fuel assembly vibrations in two pressurized water reactor(PWR) cores has been conducted to investigate the effect of cycle burnup on the properties of the ex-core detector n...Calculation of the neutron noise induced by fuel assembly vibrations in two pressurized water reactor(PWR) cores has been conducted to investigate the effect of cycle burnup on the properties of the ex-core detector noise. An extension of the method and the computational models of a previous work have been applied to two different PWR cores to examine a hypothesis that fuel assembly vibrations cause the corresponding peak in the auto power spectral density(APSD) increase during the cycle. Stochastic vibrations along a random two-dimensional trajectory of individual fuel assemblies were assumed to occur at different locations in the cores. Two models regarding the displacement amplitude of the vibrating assembly have been considered to determine the noise source. Then, the APSD of the ex-core detector noise was evaluated at three burnup steps. The results show that there is no monotonic tendency of the change in the APSD of ex-core detector; however, the increase in APSD occurs predominantly for peripheral assemblies. When assuming simultaneous vibrations of a number of fuel assemblies uniformly distributed over the core, the effect of the peripheral assemblies dominates the ex-core neutron noise.This behaviour was found similar in both cores.展开更多
In this paper,the reactor core cooling and its melt progression terminating is evaluated,and the initiation criterion for reactor cavity flooding during water injection is determined.The core cooling in pressurized-wa...In this paper,the reactor core cooling and its melt progression terminating is evaluated,and the initiation criterion for reactor cavity flooding during water injection is determined.The core cooling in pressurized-water reactor of severe accident is simulated with the thermal hydraulic and severe accident code of SCDAP/RELAP5.The results show that the core melt progression is terminated by water injection,before the core debris has formed at bottom of core,and the initiation of reactor cavity flooding is indicated by the core exit temperature.展开更多
Effect of water injection on hydrogen generation during severe accident in a 1000 MWe pressurized water reactor was studied. The analyses were carried out with different water injection rates at different core damage ...Effect of water injection on hydrogen generation during severe accident in a 1000 MWe pressurized water reactor was studied. The analyses were carried out with different water injection rates at different core damage stages. The core can be quenched and accident progression can be terminated by water injection at the time before cohesive core debris is formed at lower core region. Hydrogen generation rate decreases with water injection into the core at the peak core temperature of 1700 K, because the core is quenched and reflooded quickly. The water injection at the peak core temperature of 1900 K, the hydrogen generation rate increases at low injection rates of the water, as the core is quenched slowly and the core remains in uncovered condition at high temperatures for a longer time than the situation of high injection rate. At peak core temperature of 2100–2300 K, the Hydrogen generation rate increases by water injection because of the steam serving to the high temperature steam-starved core. Hydrogen generation rate increases significantly after water injection into the core at peak core temperature of 2500 K because of the steam serving to the relocating Zr-U-O mixture. Almost no hydrogen generation can be seen in base case after formation of the molten pool at the lower core region. However, hydrogen is generated if water is injected into the molten pool, because steam serves to the crust supporting the molten pool. Reactor coolant system (RCS) depressurization by opening power operated relief valves has important effect on hydrogen generation. Special attention should be paid to hydrogen generation enhancement caused by RCS depressurization.展开更多
基金supported by Vietnam National Foundation for Science and Technology Development(NAFOSTED)(No.103.04-2014.79)
文摘Calculation of the neutron noise induced by fuel assembly vibrations in two pressurized water reactor(PWR) cores has been conducted to investigate the effect of cycle burnup on the properties of the ex-core detector noise. An extension of the method and the computational models of a previous work have been applied to two different PWR cores to examine a hypothesis that fuel assembly vibrations cause the corresponding peak in the auto power spectral density(APSD) increase during the cycle. Stochastic vibrations along a random two-dimensional trajectory of individual fuel assemblies were assumed to occur at different locations in the cores. Two models regarding the displacement amplitude of the vibrating assembly have been considered to determine the noise source. Then, the APSD of the ex-core detector noise was evaluated at three burnup steps. The results show that there is no monotonic tendency of the change in the APSD of ex-core detector; however, the increase in APSD occurs predominantly for peripheral assemblies. When assuming simultaneous vibrations of a number of fuel assemblies uniformly distributed over the core, the effect of the peripheral assemblies dominates the ex-core neutron noise.This behaviour was found similar in both cores.
基金Supported by National Basic Research Program of China (No.2009CB 724301)
文摘In this paper,the reactor core cooling and its melt progression terminating is evaluated,and the initiation criterion for reactor cavity flooding during water injection is determined.The core cooling in pressurized-water reactor of severe accident is simulated with the thermal hydraulic and severe accident code of SCDAP/RELAP5.The results show that the core melt progression is terminated by water injection,before the core debris has formed at bottom of core,and the initiation of reactor cavity flooding is indicated by the core exit temperature.
基金Supported by National Basic Research Program of China (No.2009CB724301)
文摘Effect of water injection on hydrogen generation during severe accident in a 1000 MWe pressurized water reactor was studied. The analyses were carried out with different water injection rates at different core damage stages. The core can be quenched and accident progression can be terminated by water injection at the time before cohesive core debris is formed at lower core region. Hydrogen generation rate decreases with water injection into the core at the peak core temperature of 1700 K, because the core is quenched and reflooded quickly. The water injection at the peak core temperature of 1900 K, the hydrogen generation rate increases at low injection rates of the water, as the core is quenched slowly and the core remains in uncovered condition at high temperatures for a longer time than the situation of high injection rate. At peak core temperature of 2100–2300 K, the Hydrogen generation rate increases by water injection because of the steam serving to the high temperature steam-starved core. Hydrogen generation rate increases significantly after water injection into the core at peak core temperature of 2500 K because of the steam serving to the relocating Zr-U-O mixture. Almost no hydrogen generation can be seen in base case after formation of the molten pool at the lower core region. However, hydrogen is generated if water is injected into the molten pool, because steam serves to the crust supporting the molten pool. Reactor coolant system (RCS) depressurization by opening power operated relief valves has important effect on hydrogen generation. Special attention should be paid to hydrogen generation enhancement caused by RCS depressurization.
