A series of Ce, H3PW12O40 co-doped TiO2 hollow fibers photocatalysts have been prepared by sol-gel method using ammonium ceric nitrate, H3PW12O40 and tetrabutyltitanate as precursors and cotton fibers as template, fol...A series of Ce, H3PW12O40 co-doped TiO2 hollow fibers photocatalysts have been prepared by sol-gel method using ammonium ceric nitrate, H3PW12O40 and tetrabutyltitanate as precursors and cotton fibers as template, followed by calcination at 500 ℃ in N2 atmosphere for 2 h. Scanning electron microscopy, X-ray diffraction, nitrogen adsorption-desorption mea- surements, and UV-Vis spectroscopy are employed to characterize the morphology, crystal structure, surface structure, and optical absorption properties of the samples. The photo- catalytic performance of the samples has been studied by photodegradation phenol in water under UV and visible light irradiation. The results show that the TiO2 fiber materials have hollow structures, and the co-doped TiO2 hollow fibers exhibit higher photocatalytic activities for the degradation of phenol than un-doped, single-doped TiO2 hollow fibers under UV and visible light. In addition, the recyclability of co-doped TiO2 fibers is also confirmed that the TiO2 fiber retains ca. 90% of its activity after being used four times. It is shown that the co-doped TiO2 fibers can be activated by visible light and may be potentially applied to the treatment of water contaminated by organic pollutants. The synergistic effect of Ce and H3PW12O40 co-doping plays an important role in improving the photocatalytic activity.展开更多
A series of heteropoly acid (HPA) based Al2O3 catalysts with three-dimensional ordered (3DOM) structure were synthesized by colloidal crystal template method.Interconnected macropores (250 nm) could be clearly observe...A series of heteropoly acid (HPA) based Al2O3 catalysts with three-dimensional ordered (3DOM) structure were synthesized by colloidal crystal template method.Interconnected macropores (250 nm) could be clearly observed by scanning electron microscope (SEM) and transmission electron microscope (TEM).Mesopores could be detected by N2 adsorption-desorption isotherms which further confirmed the 3DOM structural characteristics of catalyst.Moreover,Keggin-type HPW was highly dispersed in the Al2O3 framework,which suggested by powder X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR) results.The oxidation desulfurization (ODS) performance of 3DOM H3PW12O40/Al2O3 of refractory sulphur compounds was evaluated in the presence of hydrogen peroxide.It oxidized 98.5% of dibenzothiophene (DBT) into corresponding sulfone within 3 h,which exhibited superior ODS performance than corresponding mesoporous and microporous H3PW12O40/Al2O3 catalyst.The enhancement of ODS efficiency is related to the improvement of mass transfer of DBT in the pore channel resulting from the interconnected 3DOM structure.Furthermore,the as-prepared catalyst still demonstrates outstanding cycle performance after 6 runs,which could be easily recovered from the model fuel.展开更多
The gas-phase dehydration of glycerol was conducted over HPW/MCM-41 catalysts,which were prepared by impregnation of different amount of H3PW（12）O（40）（HPW）on the MCM-41 support.The samples were characterized by ...The gas-phase dehydration of glycerol was conducted over HPW/MCM-41 catalysts,which were prepared by impregnation of different amount of H3PW（12）O（40）（HPW）on the MCM-41 support.The samples were characterized by XRD,N2 physisorption,FTIR,NH3-TPD,and pyridine-FTIR measurements.N2 physisorption results suggested that the uniform framework of MCM-41 could still be well maintained after modified with HPW.Pyridine-FTIR experiments indicate that HPW modified MCM-41 can generate rich Br？nsted acid sites.Moreover,Brnsted acid sites facilitated to improve acrolein selectivity.Under the optimized reaction conditions：40wt%HPW loading,20%glycerol concentration,and 320℃reaction temperature,the glycerol conversion and acrolein selectivity reach 85%and 80%,respectively.展开更多
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.41373127） and Liaon- ing Provincial Natural Science Foundation of China （No.2013020121）.
文摘A series of Ce, H3PW12O40 co-doped TiO2 hollow fibers photocatalysts have been prepared by sol-gel method using ammonium ceric nitrate, H3PW12O40 and tetrabutyltitanate as precursors and cotton fibers as template, followed by calcination at 500 ℃ in N2 atmosphere for 2 h. Scanning electron microscopy, X-ray diffraction, nitrogen adsorption-desorption mea- surements, and UV-Vis spectroscopy are employed to characterize the morphology, crystal structure, surface structure, and optical absorption properties of the samples. The photo- catalytic performance of the samples has been studied by photodegradation phenol in water under UV and visible light irradiation. The results show that the TiO2 fiber materials have hollow structures, and the co-doped TiO2 hollow fibers exhibit higher photocatalytic activities for the degradation of phenol than un-doped, single-doped TiO2 hollow fibers under UV and visible light. In addition, the recyclability of co-doped TiO2 fibers is also confirmed that the TiO2 fiber retains ca. 90% of its activity after being used four times. It is shown that the co-doped TiO2 fibers can be activated by visible light and may be potentially applied to the treatment of water contaminated by organic pollutants. The synergistic effect of Ce and H3PW12O40 co-doping plays an important role in improving the photocatalytic activity.
基金Funded by the National Natural Science Foundation of China(No.21476177)。
文摘A series of heteropoly acid (HPA) based Al2O3 catalysts with three-dimensional ordered (3DOM) structure were synthesized by colloidal crystal template method.Interconnected macropores (250 nm) could be clearly observed by scanning electron microscope (SEM) and transmission electron microscope (TEM).Mesopores could be detected by N2 adsorption-desorption isotherms which further confirmed the 3DOM structural characteristics of catalyst.Moreover,Keggin-type HPW was highly dispersed in the Al2O3 framework,which suggested by powder X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR) results.The oxidation desulfurization (ODS) performance of 3DOM H3PW12O40/Al2O3 of refractory sulphur compounds was evaluated in the presence of hydrogen peroxide.It oxidized 98.5% of dibenzothiophene (DBT) into corresponding sulfone within 3 h,which exhibited superior ODS performance than corresponding mesoporous and microporous H3PW12O40/Al2O3 catalyst.The enhancement of ODS efficiency is related to the improvement of mass transfer of DBT in the pore channel resulting from the interconnected 3DOM structure.Furthermore,the as-prepared catalyst still demonstrates outstanding cycle performance after 6 runs,which could be easily recovered from the model fuel.
基金Funded by the National Natural Science Foundation of China(No.21303154)
文摘The gas-phase dehydration of glycerol was conducted over HPW/MCM-41 catalysts,which were prepared by impregnation of different amount of H3PW（12）O（40）（HPW）on the MCM-41 support.The samples were characterized by XRD,N2 physisorption,FTIR,NH3-TPD,and pyridine-FTIR measurements.N2 physisorption results suggested that the uniform framework of MCM-41 could still be well maintained after modified with HPW.Pyridine-FTIR experiments indicate that HPW modified MCM-41 can generate rich Br？nsted acid sites.Moreover,Brnsted acid sites facilitated to improve acrolein selectivity.Under the optimized reaction conditions：40wt%HPW loading,20%glycerol concentration,and 320℃reaction temperature,the glycerol conversion and acrolein selectivity reach 85%and 80%,respectively.
