In this study,the casting process is used to fabricate modified polyvinyl alcohol(PVA),starch(S),and carboxymethyl cellulose(CMC)polymer blend films(PVA/S/CMC)loaded with various concentrations of irondoped carbon qua...In this study,the casting process is used to fabricate modified polyvinyl alcohol(PVA),starch(S),and carboxymethyl cellulose(CMC)polymer blend films(PVA/S/CMC)loaded with various concentrations of irondoped carbon quantum dots(Fe-CQDs)and denoted as(PVA/S/CMC@Fe-CQDs).A one-step microwave strategy was employed as a facile method to prepare Fe-CQDs.Through a series of characterization techniques,fourier-transform infrared(FTIR)spectroscopy,x-ray diffraction(XRD)analysis,and scanning electron microscopy(SEM)have been used to show the successful integration of Fe-CQDs into the PVA/S/CMCmatrix.Loading the synthesized Fe-CQDs to the polymeric matrix significantly enhanced the mechanical properties of the films represented in the tensile strength,Young’s modulus,and hardness.However,the elongation decreased noticeably upon increasing the iron-doped carbon dots.The surface wettability was also studied by measuring the contact angle of the prepared films.The findings showed a noticeable elevation in these measurements by increasing the Fe-CQDs content,declaring the role of a hydrophobic character in these nanoparticles when introduced into a hydrophilic polymeric system.The dielectric characteristics of the reinforced polymer composite films were evaluated.These results revealed that the ac-conductivity of the investigated films was boosted with increasing Fe-CQDs’ratio and frequency.The PVA/S/CMC@Fe-CQDs films possess substantial potential for efficient energy storage applications.展开更多
TDI(甲苯二异氰酸酯)交联改性PVA(聚乙烯醇)能明显提高PVA胶粘剂的耐水性和粘接性能。以PVA掺量、羧甲基纤维素(CMC)掺量、交联剂TDI掺量、催化剂-X掺量、交联温度和交联时间为试验因素,压缩剪切强度为考核指标,采用正交试验法优选出合...TDI(甲苯二异氰酸酯)交联改性PVA(聚乙烯醇)能明显提高PVA胶粘剂的耐水性和粘接性能。以PVA掺量、羧甲基纤维素(CMC)掺量、交联剂TDI掺量、催化剂-X掺量、交联温度和交联时间为试验因素,压缩剪切强度为考核指标,采用正交试验法优选出合成该改性PVA胶粘剂的最佳工艺条件。研究结果表明:当PVA为12 g/100 m L、CMC为3.2 g/100 m L、φ(TDI)=3%、φ(催化剂-X)=0.4%(均相对于胶粘剂体积而言)、交联温度为30℃和交联时间为45 min时,所合成的单组分TDI改性PVA胶粘剂具有良好的环保性、粘接性,可广泛应用于林产工业、纸品工业以及建筑行业等领域。展开更多
以甲苯二异氰酸酯(TDI)为交联剂,制备了TDI交联改性羧甲基纤维素(CMC)和聚乙烯醇(PVA)混合胶粘剂体系,并在交联反应完成后,用硼砂消乳增稠。采用正交试验法探讨了主要原材料配比、交联反应温度和交联反应时间等工艺条件对改性PVA胶粘剂...以甲苯二异氰酸酯(TDI)为交联剂,制备了TDI交联改性羧甲基纤维素(CMC)和聚乙烯醇(PVA)混合胶粘剂体系,并在交联反应完成后,用硼砂消乳增稠。采用正交试验法探讨了主要原材料配比、交联反应温度和交联反应时间等工艺条件对改性PVA胶粘剂性能的影响。研究结果表明:当PVA为12 g/100 m L、CMC为1.6 g/100 m L、TDI为4.00 m L/100 m L、硼砂为0.8 g/100 m L、交联反应温度为40℃和交联反应时间为90 min时,改性PVA胶粘剂具有良好的综合性能,其颜色稳定性及储存稳定性较佳,对木制品的粘接强度相对最好。展开更多
Silver nanoparticles were synthesized by chemical reduction method. The Ag nanoparticles (AgNP) were characterized using UV-Vis spectroscopy which shows an absorption band at 420 nm confirming the formation of nanopar...Silver nanoparticles were synthesized by chemical reduction method. The Ag nanoparticles (AgNP) were characterized using UV-Vis spectroscopy which shows an absorption band at 420 nm confirming the formation of nanoparticles. For any practical application of the silver nanoparticles it is necessary to stabilize it which can be done by making a composite. In the present studies three polymers were chosen such that AgNP could be put to some practical use. Polyvinyl Alcohol (PVA), Polypyrrole (Ppy) and Carboxymethyl cellulose (CMC) are important for use in textiles, electronics and food/drug technologies respectively. Polymeric composites of PVA, PPy, and CMC were prepared by mixing the aqueous solutions of the respective polymers and the colloidal suspension of preformed silver nanoparticles. Various compositions containing 1% to 5% of Ag nanoparticles were prepared. Thin films of these composites were characterized by UV-Vis spectroscopy, X-ray diffraction and Scanning electron microscopy. X-ray diffraction showed the presence of the peaks at 2θ values of 38.1°, 44.2°, 64.4 and 78.2° corresponding to cubic phase of silver metal. SEM photographs revealed the presence of Ag nanoparticles of sizes varying from 40 to 80 nm. The electrical conductivity of these materials was studied using the four probe method. The conductivity was found to increase from 10–6 for control samples to 10–3 S/cm after the formation of the nanocomposites.展开更多
文摘In this study,the casting process is used to fabricate modified polyvinyl alcohol(PVA),starch(S),and carboxymethyl cellulose(CMC)polymer blend films(PVA/S/CMC)loaded with various concentrations of irondoped carbon quantum dots(Fe-CQDs)and denoted as(PVA/S/CMC@Fe-CQDs).A one-step microwave strategy was employed as a facile method to prepare Fe-CQDs.Through a series of characterization techniques,fourier-transform infrared(FTIR)spectroscopy,x-ray diffraction(XRD)analysis,and scanning electron microscopy(SEM)have been used to show the successful integration of Fe-CQDs into the PVA/S/CMCmatrix.Loading the synthesized Fe-CQDs to the polymeric matrix significantly enhanced the mechanical properties of the films represented in the tensile strength,Young’s modulus,and hardness.However,the elongation decreased noticeably upon increasing the iron-doped carbon dots.The surface wettability was also studied by measuring the contact angle of the prepared films.The findings showed a noticeable elevation in these measurements by increasing the Fe-CQDs content,declaring the role of a hydrophobic character in these nanoparticles when introduced into a hydrophilic polymeric system.The dielectric characteristics of the reinforced polymer composite films were evaluated.These results revealed that the ac-conductivity of the investigated films was boosted with increasing Fe-CQDs’ratio and frequency.The PVA/S/CMC@Fe-CQDs films possess substantial potential for efficient energy storage applications.
文摘TDI(甲苯二异氰酸酯)交联改性PVA(聚乙烯醇)能明显提高PVA胶粘剂的耐水性和粘接性能。以PVA掺量、羧甲基纤维素(CMC)掺量、交联剂TDI掺量、催化剂-X掺量、交联温度和交联时间为试验因素,压缩剪切强度为考核指标,采用正交试验法优选出合成该改性PVA胶粘剂的最佳工艺条件。研究结果表明:当PVA为12 g/100 m L、CMC为3.2 g/100 m L、φ(TDI)=3%、φ(催化剂-X)=0.4%(均相对于胶粘剂体积而言)、交联温度为30℃和交联时间为45 min时,所合成的单组分TDI改性PVA胶粘剂具有良好的环保性、粘接性,可广泛应用于林产工业、纸品工业以及建筑行业等领域。
文摘以甲苯二异氰酸酯(TDI)为交联剂,制备了TDI交联改性羧甲基纤维素(CMC)和聚乙烯醇(PVA)混合胶粘剂体系,并在交联反应完成后,用硼砂消乳增稠。采用正交试验法探讨了主要原材料配比、交联反应温度和交联反应时间等工艺条件对改性PVA胶粘剂性能的影响。研究结果表明:当PVA为12 g/100 m L、CMC为1.6 g/100 m L、TDI为4.00 m L/100 m L、硼砂为0.8 g/100 m L、交联反应温度为40℃和交联反应时间为90 min时,改性PVA胶粘剂具有良好的综合性能,其颜色稳定性及储存稳定性较佳,对木制品的粘接强度相对最好。
文摘Silver nanoparticles were synthesized by chemical reduction method. The Ag nanoparticles (AgNP) were characterized using UV-Vis spectroscopy which shows an absorption band at 420 nm confirming the formation of nanoparticles. For any practical application of the silver nanoparticles it is necessary to stabilize it which can be done by making a composite. In the present studies three polymers were chosen such that AgNP could be put to some practical use. Polyvinyl Alcohol (PVA), Polypyrrole (Ppy) and Carboxymethyl cellulose (CMC) are important for use in textiles, electronics and food/drug technologies respectively. Polymeric composites of PVA, PPy, and CMC were prepared by mixing the aqueous solutions of the respective polymers and the colloidal suspension of preformed silver nanoparticles. Various compositions containing 1% to 5% of Ag nanoparticles were prepared. Thin films of these composites were characterized by UV-Vis spectroscopy, X-ray diffraction and Scanning electron microscopy. X-ray diffraction showed the presence of the peaks at 2θ values of 38.1°, 44.2°, 64.4 and 78.2° corresponding to cubic phase of silver metal. SEM photographs revealed the presence of Ag nanoparticles of sizes varying from 40 to 80 nm. The electrical conductivity of these materials was studied using the four probe method. The conductivity was found to increase from 10–6 for control samples to 10–3 S/cm after the formation of the nanocomposites.
