Selective laser sintering （SLS） is a new process to prepare the polystyrene （PS）/Al2O3 nanocomposites. In this paper, with different laser power and other processing parameters unchanged, the morphology, density a...Selective laser sintering （SLS） is a new process to prepare the polystyrene （PS）/Al2O3 nanocomposites. In this paper, with different laser power and other processing parameters unchanged, the morphology, density and mechanical properties of the sintered specimens were investigated. It was found that nano-sized inorganic particles are uniformly located in the PS matrix and the maximum density of the sintered specimens with pure PS powder reaches 1.07 g/cm^3, higher than 1.04 g/cm^3 that of the sintered specimens with mixture powder. Due to strengthening and toughness of the nano-sized Al2O3 inorganic particles, the maximum notched impact strength and tensile strength of the sintered part mixed with nano-sized inorganic particles are improved greatly from 7.5 to 12.1 kJ/m^2 and from 6.5 to 31.2 MPa, respectively, under the same sintering condition.展开更多
High surface area Nafion/SiO2 nanocomposites with nano-sized Nafion resin particles entrapped and dispersed within the highly porous silica matrix exhibited significantly enhanced activity, high selectivity and long-t...High surface area Nafion/SiO2 nanocomposites with nano-sized Nafion resin particles entrapped and dispersed within the highly porous silica matrix exhibited significantly enhanced activity, high selectivity and long-term stability for the alkylation of benzene with linear C9-C13 alkenes owing to the increased accessibility of Nafion resin-based acid sites to reactants.展开更多
An improved sol-gel method was employed to prepare Eu3+ ions doped SiO2-Y2O3 nanocomposites.Systematic study was carried out on the effect of post-annealing treatment on photoluminescence(PL) properties of the samples...An improved sol-gel method was employed to prepare Eu3+ ions doped SiO2-Y2O3 nanocomposites.Systematic study was carried out on the effect of post-annealing treatment on photoluminescence(PL) properties of the samples under various europium ions doping concentrations.X-ray diffraction(XRD) patterns indicated that the samples showed an amorphous matrix structure,and the scanning electron microscopy(SEM) pictures showed that the samples presented a nano size(from 21 to 42 nm) granular-stack structure after hi...展开更多
LaF^3＋ Yb^3＋ , Er^3＋ nanoparticles were successfully synthesized using solvothermal treatment, and LaF^3＋ Yb^3＋ , Er^3＋/SiO2 core/shell nanoparticles were also prepared with reverse microemulsion technique. The ...LaF^3＋ Yb^3＋ , Er^3＋ nanoparticles were successfully synthesized using solvothermal treatment, and LaF^3＋ Yb^3＋ , Er^3＋/SiO2 core/shell nanoparticles were also prepared with reverse microemulsion technique. The crystal structure, morphology and photoluminescence properties of as-prepared core/shell nanoparticles were in- vestigated by X-ray diffraction, transmission electron microscopy and fluorescence spectrophotometer. The re- sults showed thatLaF^3＋ Yb^3＋ , Er^3＋ nanoparticles are of hexagonal structure and SiO2 shell is amorphous. The size ofLaF^3＋ Yb^3＋ , Er^3＋. nanoparticles is 13 nm and the LaF^3＋ Yb^3＋ , Er^3＋/SiO2 nanoparticles present clearly a core/shell structure with 12 nm shell thickness. The solubility of LaF^3＋ Yb^3＋ , Er^3＋ nanocrystals in water and the biocompatibility are both improved by the SiO2 shell. The upconversion luminescence spectra suggested that the SiO~ shell has small effect on the upconversion luminescence properties of the LaF^3＋ Yb^3＋ , Er^3＋ nanocrys- tals. The core/shell structure LaF^3＋ Yb^3＋ , Er^3＋ /SiO2. nanopartlcles are expected to be used in biological appli- cations.展开更多
Monodisperse silicon dioxide particles have been prepared by the seed growth method,and different coupling agents were used for modifying these silica particles.The results show that the size deviation of silica parti...Monodisperse silicon dioxide particles have been prepared by the seed growth method,and different coupling agents were used for modifying these silica particles.The results show that the size deviation of silica particles modified with[3 (methacryloyloxy)propyl] trimethoxysilane(KH 570) is much lower than that of silica particles modified with vinyl triethyloxy silane as the coupling agent.In the presence of ethanol and water,styrene may react with silica modified by KH 570 in dispersion polymerization.It was discovered through transmission electron microscopy and energy spectrum that the modified silica particles were successfully encapsulated with polystyrene.The number of silica particles encapsulated with polystyrene was continually decreased with the increase of the size of silica particles.Moreover,the number of silica particles was nearly unity in each SiO 2/PS composite particle when the silica particle size was greater than 410?nm.展开更多
PS/SiO2 particles with core-shell structure were synthesized by coating silica on surface of polystyrene(PS) colloidal particles.The reaction parameters,such as initial tetraethyl orthosilicate(TEOS) concentration,wat...PS/SiO2 particles with core-shell structure were synthesized by coating silica on surface of polystyrene(PS) colloidal particles.The reaction parameters,such as initial tetraethyl orthosilicate(TEOS) concentration,water concentration and reaction temperature,have been investigated to control the thickness of silica shells.The shell thickness was prepositional to the square root of the initial concentration of TEOS and first increased with increasing water concentration,reached a maximum at about 2.0 mol/L and then started decreasing beyond that concentration.It was also found that the shell thickness decreased firstly with the reaction temperature added,then tended to a constant.The so-synthesized PS/SiO2 core-shell particles were directly crystallized into 3-D ordered thin film,then sintered at 570℃ into the ordered macroporous thin film.Compared with the conditional method,the present approach avoids repeatedly filling the precursor in the templetes and save time more.展开更多
In the presence of Nafion/SiO2 nanocomposite catalyst, the benzylation of aromatic compounds with benzyl chloride proceeded to afford diphenylmethane derivatives in high yields. The catalyst showed high catalytic ac...In the presence of Nafion/SiO2 nanocomposite catalyst, the benzylation of aromatic compounds with benzyl chloride proceeded to afford diphenylmethane derivatives in high yields. The catalyst showed high catalytic activity not only for electron-rich aromatic compounds, but also for electron-poor aromatic compounds. Under identical conditions, the self-benzylation of benzyl chloride, and dibenzylation and/or multi-benzylation of aromatic compounds were negligible.展开更多
Fe3O4:SiO2 nanocomposite powders were synthesized by a two-step process,which included the precipitation of FeCl2 and FeCl3 and the gelation of silicic acid solution derived from water glass.At first,Fe3O4 nanoparticl...Fe3O4:SiO2 nanocomposite powders were synthesized by a two-step process,which included the precipitation of FeCl2 and FeCl3 and the gelation of silicic acid solution derived from water glass.At first,Fe3O4 nanoparticles having a crystallite size of 20 nm were obtained by controlling the ratio of Fe(II) and Fe(III) precursors.In the second step,Fe3O4 particles were embedded in SiO2 matrix by the hydrolysis and subsequent condensation of the silicic acid solution containing Fe3O4 particles.It was found that the Fe3O4 nanoparticles homogenously disperse in the SiO2 matrix.The Fe3O4:SiO2 nanocomposite exhibited an enhanced thermal stability against oxidation compared with pure Fe3O4.FT-IR analysis indicates the presence of the Si-O-Fe bond in the Fe3O4:SiO2 (1:10,mole fraction) nanocomposite.展开更多
文摘Selective laser sintering （SLS） is a new process to prepare the polystyrene （PS）/Al2O3 nanocomposites. In this paper, with different laser power and other processing parameters unchanged, the morphology, density and mechanical properties of the sintered specimens were investigated. It was found that nano-sized inorganic particles are uniformly located in the PS matrix and the maximum density of the sintered specimens with pure PS powder reaches 1.07 g/cm^3, higher than 1.04 g/cm^3 that of the sintered specimens with mixture powder. Due to strengthening and toughness of the nano-sized Al2O3 inorganic particles, the maximum notched impact strength and tensile strength of the sintered part mixed with nano-sized inorganic particles are improved greatly from 7.5 to 12.1 kJ/m^2 and from 6.5 to 31.2 MPa, respectively, under the same sintering condition.
文摘High surface area Nafion/SiO2 nanocomposites with nano-sized Nafion resin particles entrapped and dispersed within the highly porous silica matrix exhibited significantly enhanced activity, high selectivity and long-term stability for the alkylation of benzene with linear C9-C13 alkenes owing to the increased accessibility of Nafion resin-based acid sites to reactants.
基金supported by the Guangdong Province (2007-173)Jiangmen City (2009-217)
文摘An improved sol-gel method was employed to prepare Eu3+ ions doped SiO2-Y2O3 nanocomposites.Systematic study was carried out on the effect of post-annealing treatment on photoluminescence(PL) properties of the samples under various europium ions doping concentrations.X-ray diffraction(XRD) patterns indicated that the samples showed an amorphous matrix structure,and the scanning electron microscopy(SEM) pictures showed that the samples presented a nano size(from 21 to 42 nm) granular-stack structure after hi...
文摘LaF^3＋ Yb^3＋ , Er^3＋ nanoparticles were successfully synthesized using solvothermal treatment, and LaF^3＋ Yb^3＋ , Er^3＋/SiO2 core/shell nanoparticles were also prepared with reverse microemulsion technique. The crystal structure, morphology and photoluminescence properties of as-prepared core/shell nanoparticles were in- vestigated by X-ray diffraction, transmission electron microscopy and fluorescence spectrophotometer. The re- sults showed thatLaF^3＋ Yb^3＋ , Er^3＋ nanoparticles are of hexagonal structure and SiO2 shell is amorphous. The size ofLaF^3＋ Yb^3＋ , Er^3＋. nanoparticles is 13 nm and the LaF^3＋ Yb^3＋ , Er^3＋/SiO2 nanoparticles present clearly a core/shell structure with 12 nm shell thickness. The solubility of LaF^3＋ Yb^3＋ , Er^3＋ nanocrystals in water and the biocompatibility are both improved by the SiO2 shell. The upconversion luminescence spectra suggested that the SiO~ shell has small effect on the upconversion luminescence properties of the LaF^3＋ Yb^3＋ , Er^3＋ nanocrys- tals. The core/shell structure LaF^3＋ Yb^3＋ , Er^3＋ /SiO2. nanopartlcles are expected to be used in biological appli- cations.
文摘Monodisperse silicon dioxide particles have been prepared by the seed growth method,and different coupling agents were used for modifying these silica particles.The results show that the size deviation of silica particles modified with[3 (methacryloyloxy)propyl] trimethoxysilane(KH 570) is much lower than that of silica particles modified with vinyl triethyloxy silane as the coupling agent.In the presence of ethanol and water,styrene may react with silica modified by KH 570 in dispersion polymerization.It was discovered through transmission electron microscopy and energy spectrum that the modified silica particles were successfully encapsulated with polystyrene.The number of silica particles encapsulated with polystyrene was continually decreased with the increase of the size of silica particles.Moreover,the number of silica particles was nearly unity in each SiO 2/PS composite particle when the silica particle size was greater than 410?nm.
基金Supported by the National Natural Science Foundation of China(No.:20221603)
文摘PS/SiO2 particles with core-shell structure were synthesized by coating silica on surface of polystyrene(PS) colloidal particles.The reaction parameters,such as initial tetraethyl orthosilicate(TEOS) concentration,water concentration and reaction temperature,have been investigated to control the thickness of silica shells.The shell thickness was prepositional to the square root of the initial concentration of TEOS and first increased with increasing water concentration,reached a maximum at about 2.0 mol/L and then started decreasing beyond that concentration.It was also found that the shell thickness decreased firstly with the reaction temperature added,then tended to a constant.The so-synthesized PS/SiO2 core-shell particles were directly crystallized into 3-D ordered thin film,then sintered at 570℃ into the ordered macroporous thin film.Compared with the conditional method,the present approach avoids repeatedly filling the precursor in the templetes and save time more.
文摘In the presence of Nafion/SiO2 nanocomposite catalyst, the benzylation of aromatic compounds with benzyl chloride proceeded to afford diphenylmethane derivatives in high yields. The catalyst showed high catalytic activity not only for electron-rich aromatic compounds, but also for electron-poor aromatic compounds. Under identical conditions, the self-benzylation of benzyl chloride, and dibenzylation and/or multi-benzylation of aromatic compounds were negligible.
基金Project(2011-0015512)supported by the National Research Foundation of Korea(NRF)Grant Funded by the Korea Government(MEST)
文摘Fe3O4:SiO2 nanocomposite powders were synthesized by a two-step process,which included the precipitation of FeCl2 and FeCl3 and the gelation of silicic acid solution derived from water glass.At first,Fe3O4 nanoparticles having a crystallite size of 20 nm were obtained by controlling the ratio of Fe(II) and Fe(III) precursors.In the second step,Fe3O4 particles were embedded in SiO2 matrix by the hydrolysis and subsequent condensation of the silicic acid solution containing Fe3O4 particles.It was found that the Fe3O4 nanoparticles homogenously disperse in the SiO2 matrix.The Fe3O4:SiO2 nanocomposite exhibited an enhanced thermal stability against oxidation compared with pure Fe3O4.FT-IR analysis indicates the presence of the Si-O-Fe bond in the Fe3O4:SiO2 (1:10,mole fraction) nanocomposite.
