The ultra-precision machining process using a single crystal diamond tool has been mainly used for machining molds of optical components.Since the micro patterns of various shapes having excellent surface roughness ca...The ultra-precision machining process using a single crystal diamond tool has been mainly used for machining molds of optical components.Since the micro patterns of various shapes having excellent surface roughness can be machined by using ultra-precision machine tools,the micro pattern on a large light guide plate (LGP) is mainly machined using a diamond tool.The tool wear occurs due to long machining distances and time while machining a large-area LGP mold.The deformation and dimensional error of micro pattern are caused by tool wear,as a result,the light efficiency of LGP declines.The characteristics of tool wear should be analyzed in order to precisely machine large-area LGP mold from all sorts of materials.The experiments were performed in order to compare wear characteristics of a V90° diamond tool using Al3003,5052,6061 and 7075.The prism pattern of depth 10 μm was machined in order to analyze characteristics of tool wear according to machining distances (0.5,1 and 1.5 km).The effects of tool wear on pattern shape were analyzed by applying overlapped cutting depths (Rough machining is (10+8+7) μm and Finish machining is (5+3+2+1) μm) by continuously machining a prism pattern of W shape of 25 μm in depth.展开更多
The BLU (back light unit) is the core component of the LCD for notebook, mobile-phone, navigation, as well as large sized TV, PID (public information display), etc. In order to enhance optical efficiency of LCD, optic...The BLU (back light unit) is the core component of the LCD for notebook, mobile-phone, navigation, as well as large sized TV, PID (public information display), etc. In order to enhance optical efficiency of LCD, optical films with the uniform prism patterns have been used for BLU by stacking two films up orthogonally. In this case, light interference-phenomenon occurred such as Morie, wet-out, u-turning, etc. It caused several problems such as low brightness, spots and stripes in LCD. Recently, the high-luminance micro complex prism patterns are actively studied to avoid the light interference-phenomenon and enhance the optical efficiency. In this study, the roll master to manufacture complex micro prism pattern film was machined by using the high precision lathe. The machined patterns on the roll master were 50, 45, 40, 35, 30, 25, 20, 15, 10 and 5 μm in the pitch with 25.0, 22.5, 20.0, 17.5, 15.0, 12.5, 10.0, 7.5, 5.0 and 2.5 μm in the peak height, respectively. The roll was 2 000 mm in length and 320 mm in diameter. The electroplated roll by copper and the natural single crystal diamond tool was used for machining the patterns. The cutting force was measured and analyzed for each cutting condition by using the dynamometer. The chips and the surfaces after being machined were analyzed by SEM and microscope.展开更多
文摘The ultra-precision machining process using a single crystal diamond tool has been mainly used for machining molds of optical components.Since the micro patterns of various shapes having excellent surface roughness can be machined by using ultra-precision machine tools,the micro pattern on a large light guide plate (LGP) is mainly machined using a diamond tool.The tool wear occurs due to long machining distances and time while machining a large-area LGP mold.The deformation and dimensional error of micro pattern are caused by tool wear,as a result,the light efficiency of LGP declines.The characteristics of tool wear should be analyzed in order to precisely machine large-area LGP mold from all sorts of materials.The experiments were performed in order to compare wear characteristics of a V90° diamond tool using Al3003,5052,6061 and 7075.The prism pattern of depth 10 μm was machined in order to analyze characteristics of tool wear according to machining distances (0.5,1 and 1.5 km).The effects of tool wear on pattern shape were analyzed by applying overlapped cutting depths (Rough machining is (10+8+7) μm and Finish machining is (5+3+2+1) μm) by continuously machining a prism pattern of W shape of 25 μm in depth.
基金Project(R15-2006-022-01001-0) supported by the National Core Research Center Program from MOST and KOSEF
文摘The BLU (back light unit) is the core component of the LCD for notebook, mobile-phone, navigation, as well as large sized TV, PID (public information display), etc. In order to enhance optical efficiency of LCD, optical films with the uniform prism patterns have been used for BLU by stacking two films up orthogonally. In this case, light interference-phenomenon occurred such as Morie, wet-out, u-turning, etc. It caused several problems such as low brightness, spots and stripes in LCD. Recently, the high-luminance micro complex prism patterns are actively studied to avoid the light interference-phenomenon and enhance the optical efficiency. In this study, the roll master to manufacture complex micro prism pattern film was machined by using the high precision lathe. The machined patterns on the roll master were 50, 45, 40, 35, 30, 25, 20, 15, 10 and 5 μm in the pitch with 25.0, 22.5, 20.0, 17.5, 15.0, 12.5, 10.0, 7.5, 5.0 and 2.5 μm in the peak height, respectively. The roll was 2 000 mm in length and 320 mm in diameter. The electroplated roll by copper and the natural single crystal diamond tool was used for machining the patterns. The cutting force was measured and analyzed for each cutting condition by using the dynamometer. The chips and the surfaces after being machined were analyzed by SEM and microscope.
