In order to analyze the load carrying capacity of prestressed concrete box girders, failure behaviors of in-situ deteriorated continuous prestressed concrete box girders under loading are experimentally observed and a...In order to analyze the load carrying capacity of prestressed concrete box girders, failure behaviors of in-situ deteriorated continuous prestressed concrete box girders under loading are experimentally observed and a finite failure analysis method for predicting behaviors of box girders is developed. A degenerated solid shell element is used to simulate box girders and material nonlinearity is considered. Since pre-stressed concrete box girders usually have a large number of curve prestressed tendons, a type of combined element is presented to simulate the prestressed tendons of box girders, and then the number of elements can be significantly reduced. The analytical results are compared with full-scale failure test results. The comparison shows that the presented method can be effectively applied to the failure analysis of in-situ continuous prestressed concrete box girders, and it also shows that the studied old bridge still has enough load carrying capacity.展开更多
As prestressed concrete(PC)structures age,long-termeffects,e.g.,creep,shrinkage,and prestress losses,compromise their structural performance.Strengthening these aged PC beams has become a crucial matter.One effective ...As prestressed concrete(PC)structures age,long-termeffects,e.g.,creep,shrinkage,and prestress losses,compromise their structural performance.Strengthening these aged PC beams has become a crucial matter.One effective solution is to use externally bonded fiber-reinforced polymer(FRP)sheets;however,limited research has been done on aged PC beams using the FRP,especially for beams with unbonded prestressing strands(UPC beams).Therefore,this research investigates the flexural strengthening efficacy of external FRP sheets on aged UPC beams with unbonded tendons.Aging minimally affected the failure modes of UPC beams,with nonstrengthened beams showing flexural failure via rebar yielding and concrete crushing,and FRP-strengthened beams failing due to FRP debonding and tensile reinforcement yielding,though tendons in the aged beams did not yield due to prestress losses,unlike the new beams.The U-wrap anchor curbed widespread debonding,leading to tensile reinforcement yielding and FRP rupture.Aging hastened crack growth and stiffness loss,increasing deflections and reducing load resistance,but FRP reinforcement mitigated these effects,enhancing cracking resistance by 14%over the unstrengthened aged beams and 7%over the new beams while boosting ultimate resistance by 9%above the non-strengthened new beams.Compared to the new FRP-strengthened beams,the aged counterparts had lower cracking resistance,stiffness and capacity—showing 20%higher deflections,7–9%lower serviceability loads,7%–17%reduced ultimate strength and 17%less deformability—due to prestress losses and premature FRP debonding.展开更多
The operational and regional conditions to which the prestressed concrete sleeper(PCS)is subjected in a railway track significantly contribute to its performance and durability.Maintaining the health of PCS poses chal...The operational and regional conditions to which the prestressed concrete sleeper(PCS)is subjected in a railway track significantly contribute to its performance and durability.Maintaining the health of PCS poses challenges,and one of these issues involves the potential occurrence of longitudinal cracks in reinforcing bars,which can be caused by various constructional,functional,and environmental factors.Longitudinal cracks in PCS compromise the structural performance,resulting in a reduced capacity to withstand the loads exerted by moving vehicles.The current evaluations not only fail to yield a precise parameter for estimating the behavior and response of the PCS,but they also overlook the specific conditions of the PCS,such as prestressing,and only provide limited information regarding existing damage.Balancing the need for accurate evaluation with consideration of costs and resources,and making informed decisions about maintenance and track performance enhancement,has become a multifaceted challenge in ensuring a robust PCS assessment.This research introduces a novel methodology to improve the evaluation of mechanical and geometrical parameters of PCS over their operational lifespan.The objective is to enhance the accuracy of PCS performance estimation by concentrating on detecting longitudinal cracks.The suggested approach seamlessly integrates model updating methods and the finite element(FE)approach to achieve an accurate and timely assessment of PCS conditions.This comprehensive examination scrutinizes the methodology by applying artificial cracks to the PCS.In addition to introducing this assessment approach,a detailed examination is conducted on a laboratory-simulated PCS featuring various combinations of longitudinal cracks measuring 40,80,and 120 cm in length.This systematic and rigorous approach ensures the reliability and robustness of the methodology.Ultimately,the parameters of cross-sectional area,moment of inertia,and modulus of elasticity,which significantly impact the performance of this sleeper,are explored and demonstrated through functional methodologies.The findings suggest that assessing and addressing damage should be conducted through a comprehensive and integrated procedure,taking into account the actual conditions of the PCS.Longitudinal cracks lead to a substantial decrease in the performance of these components in railway tracks.By applying the proposed methods,it is anticipated that the evaluation error for these components will be reduced by approximately 30%compared to visual inspections,particularly in predicting the extent of damage for cracks measuring up to 120 cm.This research has the potential to significantly enhance the evaluation of PCS performance and mitigate the impact of longitudinal cracks on the safety and longevity of ballasted railway tracks in desert areas.展开更多
Based on the durability characteristics of prestressed concrete structures,the durability limit states of carbonation and chloride ion attack are defined, respectively.Durability predicting models on the basis of reli...Based on the durability characteristics of prestressed concrete structures,the durability limit states of carbonation and chloride ion attack are defined, respectively.Durability predicting models on the basis of reliability mathematics and stochastic processes areconstructed, and the pure theoretical formulae of failure probability of prestressed concretestructures are analyzed. In addition, a simple durability design method for carbonation ofstructures is put forward. According to the analysis, the durability of prestressed concretestructures is superior to that of traditional structures. The research also indicates that theconcrete cover prescribed in the current code (GB 50010-2002) is not adequate. The rational coverthickness should notbe less than 35 or 45 mm according to carbonation or chloride ion attack,respectively.展开更多
New high performance grouts with high volume stability and good fluidity were prepared with Portland cement and a multifunctional admixture (MFA). The theological characteristics and mechanical performance of the grou...New high performance grouts with high volume stability and good fluidity were prepared with Portland cement and a multifunctional admixture (MFA). The theological characteristics and mechanical performance of the grouts were investigated. The addition of MFA effectively improves the pseudo-plasticity of the grout. The Ma cone flow time decreases obviously, and the bleeding rate tends to be zero. The deformation behaviors of fresh mixture and hardened grout are systematically studied. Mercury injection method (MIP), scanning electron microscopy (SEM) and X-ray diffractory analysis experiments are used to analyze the microstructure evolution of the grouts, which manifests that the co-action of the early bubble reaction and the latter ettringite crystallization ensure the volume stability throughout the whole hydration process and result in refined pore structure of the grout.展开更多
China's railway prestressed concrete bridge has more than 600000 holes,prestressed engineering is a key force system affecting the safety and durability of the prestressed concrete bridge structure,its constructio...China's railway prestressed concrete bridge has more than 600000 holes,prestressed engineering is a key force system affecting the safety and durability of the prestressed concrete bridge structure,its construction quality is easily affected by traditional manual operation technology,resulting in low construction efficiency and control accuracy,easy to form a hidden danger of quality and safety,it is difficult to meet the needs of less humanized,standardized intelligent construction trend.Based on the research on the intelligent prestressed construction control and testing technology and equipment for railway bridges,this paper proposes the integration of intelligent prestressed tension control and tunnel friction test of railway bridges,intelligent grouting control of tunnel and intelligent testing of beam construction quality,and sets up a complete technical system and integrated equipment for intelligent prestressed construction of bridges based on the industrial Internet of Things(IoT).Overall,improve the quality and efficiency of bridge production,construction,and management.展开更多
This article focuses on the control of cracks in prestressed concrete structures.It explains the stress characteristics,influencing factors,and causes of crack formation during construction.The article introduces adva...This article focuses on the control of cracks in prestressed concrete structures.It explains the stress characteristics,influencing factors,and causes of crack formation during construction.The article introduces advanced technologies such as intelligent prestressed tensioning,highlights key aspects like high-performance concrete mix design,and discusses various monitoring and control methods.It also covers their practical applications and achievements in real-world projects,and looks ahead to future development directions.展开更多
The surrounding rock is prone to large-scale loosening and failure after the excavation of shallow large-span caverns because of the thin overlying strata and large cross-section span.The rational design of bolt suppo...The surrounding rock is prone to large-scale loosening and failure after the excavation of shallow large-span caverns because of the thin overlying strata and large cross-section span.The rational design of bolt support is very important to the safety control of surrounding rock as a common support means.The control mechanism and design method of bolt support for shallow-buried large-span caverns is carried out.The calculation method of bolt prestress and length based on arched failure and collapsed failure mode is established.The influence mechanism of different influencing factors on the bolt prestress and length is clarified.At the same time,the constant resistance energy-absorbing bolt with high strength and high toughness is developed,and the comparative test of mechanical properties is carried out.On this basis,the design method of high prestressed bolt support for shallow-buried large-span caverns is put forward,and the field test is carried out in Qingdao metro station in China.The monitoring results show that the maximum roof settlement is 6.8 mm after the new design method is adopted,and the effective control of the shallow-buried large-span caverns is realized.The research results can provide theoretical and technical support for the safety control of shallow-buried large-span caverns.展开更多
Since the assumption of plane sections cannot be applied to the strain of unbonded tendons in prestressed concrete beams subjected to loadings,a moment-curvature nonlinear analysis method is used to develop analytical...Since the assumption of plane sections cannot be applied to the strain of unbonded tendons in prestressed concrete beams subjected to loadings,a moment-curvature nonlinear analysis method is used to develop analytical programs from stress increases in unbonded tendons at the ultimate limit state.Based on the results of model testing and simulation analysis,equations are proposed to predict the stress increase in tendons at the ultimate state in simple or continuous beams of partially prestressed concrete,considering the loading type,non-prestressed reinforcement index βp,prestressing reinforcement index βs,and span-depth ratio L/h as the basic parameters.Results of 380 beams studied here and test results for 35 simple beams obtained by the China Academy of Building Research were compared with those from prediction equations given in codes and other previous studies.The comparison reveals that the values predicted by the proposed equations agree well with experimental results.展开更多
With a concrete pavement slab prestressed, its load carrying capacity can be significantly increased; thus a thinner slab may be used for the same loading. Prestressing modify the structural behavior of the pavement ...With a concrete pavement slab prestressed, its load carrying capacity can be significantly increased; thus a thinner slab may be used for the same loading. Prestressing modify the structural behavior of the pavement slab and there is a greater resistance to impact, vibration and overloading. This paper discusses the major design considerations necessary in the successful construction of prestressed concrete pavements and presents a design procedure developed to predict the compressive stress due to prestressing in the pavements at early stage, during service and after cracking. Variation in the approach for repetitive and nonrepetitive loads is clearly distinguished. Check on the recovery after cracking for overloading in prestressed pavements is also needed. Finally, a design example is illustrated the application of the approach developed.展开更多
This work is aimed at studying the strengthening of reinforced concrete (R. C.) beams using prestressed glass fi- ber-reinforced polymer (PGFRP). Carbon fiber-reinforced polymer (CFRP) has recently become popular for ...This work is aimed at studying the strengthening of reinforced concrete (R. C.) beams using prestressed glass fi- ber-reinforced polymer (PGFRP). Carbon fiber-reinforced polymer (CFRP) has recently become popular for use as repair or rehabilitation material for deteriorated R. C. structures, but because CFRP material is very stiff, the difference in CFRP sheet and concrete material properties is not favorable for transferring the prestress from CFRP sheets to R. C. members. Glass fi- ber-reinforced polymer (GFRP) sheets with Modulus of Elasticity quite close to that of concrete was chosen in this study. The load-carrying capacities (ultimate loads) and the deflections of strengthened R. C. beams using GFRP and PGFRP sheets were tested and compared. T- and ⊥-shaped beams were used as the under-strengthened and over-strengthened beams. The GFRP sheets were prestressed to one-half their tensile capacities before being bonded to the T- and ⊥-shaped R. C. beams. The prestressed tension in the PGFRP sheets caused cambers in the R. C. beams without cracks on the tensile faces. The PGFRP sheets also enhanced the load-carrying capacity. The test results indicated that T-shaped beams with GFRP sheets increased in load-carrying capacity by 55% while the same beams with PGFRP sheets could increase load-carrying capacity by 100%. The ⊥-shaped beams with GFRP sheets could increase load-carrying capacity by 97% while the same beams with PGFRP sheets could increase the loading-carrying capacity by 117%. Under the same external loads, beams with GFRP sheets underwent larger deflections than beams with PGFRP sheets. While GFRP sheets strengthen R. C. beams, PGFRP sheets decrease the beams’ ductility, especially for the over-strengthened beams (⊥-shaped beams).展开更多
The dynamic finite element model （FEM） of a prestressed concrete continuous box-girder bridge, called the Tongyang Canal Bridge, is built and updated based on the results of ambient vibration testing （AVT） using a...The dynamic finite element model （FEM） of a prestressed concrete continuous box-girder bridge, called the Tongyang Canal Bridge, is built and updated based on the results of ambient vibration testing （AVT） using a real-coded accelerating genetic algorithm （RAGA）. The objective functions are defined based on natural frequency and modal assurance criterion （MAC） metrics to evaluate the updated FEM. Two objective functions are defined to fully account for the relative errors and standard deviations of the natural frequencies and MAC between the AVT results and the updated FEM predictions. The dynamically updated FEM of the bridge can better represent its structural dynamics and serve as a baseline in long-term health monitoring, condition assessment and damage identification over the service life of the bridge .展开更多
The long-term stability of a prestressed anchored slope might be influenced by the durability of the anchorage structure.To understand long-term stability of anchored rock slopes,the research presented herein evaluate...The long-term stability of a prestressed anchored slope might be influenced by the durability of the anchorage structure.To understand long-term stability of anchored rock slopes,the research presented herein evaluated the performance evolution of a prestressed anchored bedding slope system in a corrosive environment by model test.The corrosion process in a prestressed anchor bar was monitored in terms of its open-circuit potential(OCP),corrosion current density(CCD),and electrochemical impedance spectroscopy(EIS).The stability of the prestressed anchored slope was evaluated by monitoring changes in anchorage force and displacements.The experimental results show that prestress and oxygen could reduce the corrosion resistance of the anchor bar,and anchor bars in a chloride-rich environment are very susceptible to corrosion.Prestressed tendons in a corrosive environment suffer a loss of anchorage force,the prestress decreases rapidly after locking,and the rate thereof decreases until stabilising;in the later stage,corrosion leads to the reduction of the cross-sectional area of the steel bar which may cause the reduction in anchorage force again.Anchorage force controls the deformation and stability of the anchored slope,the prestress loss caused by later corrosion may lead to an increased rate of displacement and stability degradation of the prestressed anchored rock slope.展开更多
Prestressed wire winded framework （PWWF） is an advanced structure and the most expensive part in the large-scale equip- ment. The traditional design of PWWF is complicated, highly iterative and cost uncontrolable, b...Prestressed wire winded framework （PWWF） is an advanced structure and the most expensive part in the large-scale equip- ment. The traditional design of PWWF is complicated, highly iterative and cost uncontrolable, because PWWF is a variable stiffness multi-agent structure, with non-linear loading and deformation coordination. In this paper, cost optimization method of large-scale PWWF by multiple-island genetic algorithm （MIGA） is presented. Optimization design flow and optimization model are proposed based on variable-tension wire winding theory. An example of the PWWF cost optimization of isostatic equipment with axial load 6 000 kN is given. The optimization cost is reduced by 21.6% compared with traditional design. It has also been verified by the finite-element analysis and successfully applied to an actual PWWF design of isostatic press. The results show that this method is efficient and reliable. This method can also provide a guide for optimal design for ultra-large dimension muti-frame structure of 546 MN and 907 MN isostatic press equipment.展开更多
A dynamic test on externally prestressed simply supported concrete beams separately with three typical types of tendon distributions was conducted. The results show that the natural frequencies of the beams increase w...A dynamic test on externally prestressed simply supported concrete beams separately with three typical types of tendon distributions was conducted. The results show that the natural frequencies of the beams increase with the increase in the prestressing force at the tensioning stage, and the natural frequencies decrease after the cracks occur in the beams. Following the calculation formula of natural frequency of externally prestressed beam, which was reported in a literature, the natural frequencies of the experimental beams are calculated, and big errors are found between the test results and the calculated ones of natural frequency values. As a result, this paper has tried to adopt two methods to correct the rigidity parameter of the concrete beam in the formula for natural frequency calculation, and to use the corrected formula to calculate the frequencies of the experimental beams. The calculation results indicate a good consistency with the experimental ones, which verifies the feasibility of the corrected formula.展开更多
This paper presents an experimental study of a prestressed lightweight concrete platform model with a tank and for five steel-columns. This platform can be used not only for extraction but also for storage of oil and ...This paper presents an experimental study of a prestressed lightweight concrete platform model with a tank and for five steel-columns. This platform can be used not only for extraction but also for storage of oil and is suitable for the Bohai Sea and other shallow seas of China. The platform is subjected to temperature. load, or both. The corresponding temperature distribution. strains, cracks. and vulnerable parts of the platform are analyzed respectively. By use of the finite element method and empirical formulas, the temperature field of the model is analyzed. The results agree with the experimental results, thereby verifying! the reliability of these two calculating methods. The paper provides an experimental basis for the des sign of the bearing capacity and normal service state of prestressed concrete platforms.展开更多
Creep is an important characteristic of bamboo and wood materials under long-term loading.This paper aims to study the long-term bending beha-viour of prestressed glulam bamboo-wood beam(GBWB).For this,14 pre-stressed...Creep is an important characteristic of bamboo and wood materials under long-term loading.This paper aims to study the long-term bending beha-viour of prestressed glulam bamboo-wood beam(GBWB).For this,14 pre-stressed GBWBs were selected and subjected to a long-term loading test for 60 days.Then,a comparative analysis was performed for the effects of pre-tension values,the number of pre-stressed wires,and long-term load on the stress variation of the steel wire and the long-term deflection of the beam midspan.The test results showed that with the number of prestressed wires increasing,the total stress of the steel wire in the beam midspan and the ratio of the long-term deflec-tion to the total deflection decreases decreased,but when the number of steel wires exceeded 4,the total stress and long-term deflection was less infuenced;with the pre-tension value increasing,the ratio of the total stress of the steel wire in the beam midspan and the ratio of the long-temm deflection to the total deflec-tion also decreased,but when the prestress force was greater than 3.975 kN,the:total stress and long-term deflection were less affected;with the other parameters unchanged,when the value of the long-term load increased,the total stress of the steel wire decreased,and the long-temm deflection of the beam midspan increased,which shall be more significant with the long-term load greater than 30%of the standard ultimate bearing capacity.After the test,the experimental data were fitted,and the creep coefficient was given.Finally,the long-term stiffness calcula-tion fommula of the pre-stressed GBWB based on creep effect was proposed.The research findings have certain theoretical significance and engineering value.展开更多
The elastic prestressed ultrasonic peen forming(UPF)was adopted in order to solve problems of insufficient bending deformation and large spherical deformation of plate during free UPF.The theoretical analysis of prest...The elastic prestressed ultrasonic peen forming(UPF)was adopted in order to solve problems of insufficient bending deformation and large spherical deformation of plate during free UPF.The theoretical analysis of prestressed UPF and the influence of elastic prebending moment on deformation were analyzed.Spherical deformation coefficient was defined to quantificationally describe the spherical deformation.Experiments were conducted to compare the differences between free UPF and prestressed UPF processes and the effects of processing parameters on bending curvature and spherical deformation coefficient were studied.The results show that peening trajectory in chordwise direction is beneficial to enlarging spanwise bending deformation and decreasing spherical deformation coefficient.Large prebending curvature is helpful to increase spanwise bending deformation and decrease chordwise deformation,thereby obviously decreasing spherical deformation coefficient.Large spanwise deformation can be obtained under large firing pin velocity,small plate thickness and small offset distance.Large firing pin velocity plays a positive role in decreasing spherical deformation,while plate thickness and offset distance have little effect on it.Above all,prebending curvature and peening trajectory are the most important factors during prestressed UPF process.This study provides guidance for parameters optimization of prestressed UPF for wing plate with large thickness.展开更多
Prestressed anchor cables are widely used for slope reinforcement,but the loss of prestress makes it difficult to guarantee the reinforcement effect.Anchor cable prestress degradation was considered as a stochastic pr...Prestressed anchor cables are widely used for slope reinforcement,but the loss of prestress makes it difficult to guarantee the reinforcement effect.Anchor cable prestress degradation was considered as a stochastic process,and the probability density function of this process was established using gamma theory and impact theory respectively.Combined with the failure threshold,the probability density was integrated to find the time-dependent reliability of the anchor cable.Based on the monitoring data of the prestress degradation of the anchor cable,parameters in the probability density function were solved by the maximum likelihood method,and the time-varying reliability and service life of the anchor cable were obtained analytically.The applicability of two degradation theories,gamma stochastic process and impact theory,was compared.The results showed that the probability density curves of both degradation models were normally distributed and the error of reliability results did not exceed 0.06.The life prediction results of the gamma stochastic process were closer to the actual life of 400 h than the 500 h of the impact theory,and the probability curves of the anchor cable life also indicated that the impact theory overestimated the service life probability of the anchor cable.Taking the anchor cable reinforcement within the slope of the Dagushan open-pit mine as an example,and the results verify the feasibility of using gamma theory to predict the degradation of anchor cables and provides theoretical support for prevention of the degradation of anchor cables in the slope of an open-pit mine under the action of external forces.展开更多
基金Post-Doctoral Innovative Projects of Shandong Province(No.200703072)the National Natural Science Foundation of China(No.50574053)
文摘In order to analyze the load carrying capacity of prestressed concrete box girders, failure behaviors of in-situ deteriorated continuous prestressed concrete box girders under loading are experimentally observed and a finite failure analysis method for predicting behaviors of box girders is developed. A degenerated solid shell element is used to simulate box girders and material nonlinearity is considered. Since pre-stressed concrete box girders usually have a large number of curve prestressed tendons, a type of combined element is presented to simulate the prestressed tendons of box girders, and then the number of elements can be significantly reduced. The analytical results are compared with full-scale failure test results. The comparison shows that the presented method can be effectively applied to the failure analysis of in-situ continuous prestressed concrete box girders, and it also shows that the studied old bridge still has enough load carrying capacity.
基金support by the Ministry of Education and Training of Vietnam for this research,under grant no.B2023-MBS-02.
文摘As prestressed concrete(PC)structures age,long-termeffects,e.g.,creep,shrinkage,and prestress losses,compromise their structural performance.Strengthening these aged PC beams has become a crucial matter.One effective solution is to use externally bonded fiber-reinforced polymer(FRP)sheets;however,limited research has been done on aged PC beams using the FRP,especially for beams with unbonded prestressing strands(UPC beams).Therefore,this research investigates the flexural strengthening efficacy of external FRP sheets on aged UPC beams with unbonded tendons.Aging minimally affected the failure modes of UPC beams,with nonstrengthened beams showing flexural failure via rebar yielding and concrete crushing,and FRP-strengthened beams failing due to FRP debonding and tensile reinforcement yielding,though tendons in the aged beams did not yield due to prestress losses,unlike the new beams.The U-wrap anchor curbed widespread debonding,leading to tensile reinforcement yielding and FRP rupture.Aging hastened crack growth and stiffness loss,increasing deflections and reducing load resistance,but FRP reinforcement mitigated these effects,enhancing cracking resistance by 14%over the unstrengthened aged beams and 7%over the new beams while boosting ultimate resistance by 9%above the non-strengthened new beams.Compared to the new FRP-strengthened beams,the aged counterparts had lower cracking resistance,stiffness and capacity—showing 20%higher deflections,7–9%lower serviceability loads,7%–17%reduced ultimate strength and 17%less deformability—due to prestress losses and premature FRP debonding.
文摘The operational and regional conditions to which the prestressed concrete sleeper(PCS)is subjected in a railway track significantly contribute to its performance and durability.Maintaining the health of PCS poses challenges,and one of these issues involves the potential occurrence of longitudinal cracks in reinforcing bars,which can be caused by various constructional,functional,and environmental factors.Longitudinal cracks in PCS compromise the structural performance,resulting in a reduced capacity to withstand the loads exerted by moving vehicles.The current evaluations not only fail to yield a precise parameter for estimating the behavior and response of the PCS,but they also overlook the specific conditions of the PCS,such as prestressing,and only provide limited information regarding existing damage.Balancing the need for accurate evaluation with consideration of costs and resources,and making informed decisions about maintenance and track performance enhancement,has become a multifaceted challenge in ensuring a robust PCS assessment.This research introduces a novel methodology to improve the evaluation of mechanical and geometrical parameters of PCS over their operational lifespan.The objective is to enhance the accuracy of PCS performance estimation by concentrating on detecting longitudinal cracks.The suggested approach seamlessly integrates model updating methods and the finite element(FE)approach to achieve an accurate and timely assessment of PCS conditions.This comprehensive examination scrutinizes the methodology by applying artificial cracks to the PCS.In addition to introducing this assessment approach,a detailed examination is conducted on a laboratory-simulated PCS featuring various combinations of longitudinal cracks measuring 40,80,and 120 cm in length.This systematic and rigorous approach ensures the reliability and robustness of the methodology.Ultimately,the parameters of cross-sectional area,moment of inertia,and modulus of elasticity,which significantly impact the performance of this sleeper,are explored and demonstrated through functional methodologies.The findings suggest that assessing and addressing damage should be conducted through a comprehensive and integrated procedure,taking into account the actual conditions of the PCS.Longitudinal cracks lead to a substantial decrease in the performance of these components in railway tracks.By applying the proposed methods,it is anticipated that the evaluation error for these components will be reduced by approximately 30%compared to visual inspections,particularly in predicting the extent of damage for cracks measuring up to 120 cm.This research has the potential to significantly enhance the evaluation of PCS performance and mitigate the impact of longitudinal cracks on the safety and longevity of ballasted railway tracks in desert areas.
文摘Based on the durability characteristics of prestressed concrete structures,the durability limit states of carbonation and chloride ion attack are defined, respectively.Durability predicting models on the basis of reliability mathematics and stochastic processes areconstructed, and the pure theoretical formulae of failure probability of prestressed concretestructures are analyzed. In addition, a simple durability design method for carbonation ofstructures is put forward. According to the analysis, the durability of prestressed concretestructures is superior to that of traditional structures. The research also indicates that theconcrete cover prescribed in the current code (GB 50010-2002) is not adequate. The rational coverthickness should notbe less than 35 or 45 mm according to carbonation or chloride ion attack,respectively.
文摘New high performance grouts with high volume stability and good fluidity were prepared with Portland cement and a multifunctional admixture (MFA). The theological characteristics and mechanical performance of the grouts were investigated. The addition of MFA effectively improves the pseudo-plasticity of the grout. The Ma cone flow time decreases obviously, and the bleeding rate tends to be zero. The deformation behaviors of fresh mixture and hardened grout are systematically studied. Mercury injection method (MIP), scanning electron microscopy (SEM) and X-ray diffractory analysis experiments are used to analyze the microstructure evolution of the grouts, which manifests that the co-action of the early bubble reaction and the latter ettringite crystallization ensure the volume stability throughout the whole hydration process and result in refined pore structure of the grout.
基金Scientific and Technological Development Project of China Railway Design Group Co.,Ltd.(No.2022A02480005)Technology Development Project of China Railway Design Group Co.,Ltd.(No.2023A0248001).
文摘China's railway prestressed concrete bridge has more than 600000 holes,prestressed engineering is a key force system affecting the safety and durability of the prestressed concrete bridge structure,its construction quality is easily affected by traditional manual operation technology,resulting in low construction efficiency and control accuracy,easy to form a hidden danger of quality and safety,it is difficult to meet the needs of less humanized,standardized intelligent construction trend.Based on the research on the intelligent prestressed construction control and testing technology and equipment for railway bridges,this paper proposes the integration of intelligent prestressed tension control and tunnel friction test of railway bridges,intelligent grouting control of tunnel and intelligent testing of beam construction quality,and sets up a complete technical system and integrated equipment for intelligent prestressed construction of bridges based on the industrial Internet of Things(IoT).Overall,improve the quality and efficiency of bridge production,construction,and management.
文摘This article focuses on the control of cracks in prestressed concrete structures.It explains the stress characteristics,influencing factors,and causes of crack formation during construction.The article introduces advanced technologies such as intelligent prestressed tensioning,highlights key aspects like high-performance concrete mix design,and discusses various monitoring and control methods.It also covers their practical applications and achievements in real-world projects,and looks ahead to future development directions.
基金Project(2023YFC3805700) supported by the National Key Research and Development Program of ChinaProjects(42477166,42277174) supported by the National Natural Science Foundation of China+2 种基金Project(2024JCCXSB01) supported by the Fundamental Research Funds for the Central Universities,ChinaProject(KFJJ24-01M) supported by the State Key Laboratory of Explosion Science and Safety Protection,Beijing Institute of Technology,ChinaProject(HLCX-2024-04) supported by the Open Foundation of Collaborative Innovation Center of Green Development and Ecological Restoration of Mineral Resources,China。
文摘The surrounding rock is prone to large-scale loosening and failure after the excavation of shallow large-span caverns because of the thin overlying strata and large cross-section span.The rational design of bolt support is very important to the safety control of surrounding rock as a common support means.The control mechanism and design method of bolt support for shallow-buried large-span caverns is carried out.The calculation method of bolt prestress and length based on arched failure and collapsed failure mode is established.The influence mechanism of different influencing factors on the bolt prestress and length is clarified.At the same time,the constant resistance energy-absorbing bolt with high strength and high toughness is developed,and the comparative test of mechanical properties is carried out.On this basis,the design method of high prestressed bolt support for shallow-buried large-span caverns is put forward,and the field test is carried out in Qingdao metro station in China.The monitoring results show that the maximum roof settlement is 6.8 mm after the new design method is adopted,and the effective control of the shallow-buried large-span caverns is realized.The research results can provide theoretical and technical support for the safety control of shallow-buried large-span caverns.
基金Project supported by the National Natural Science Foundation of China (No.50178026)the New Century Excellent Talents in UniversityChangjiang Scholars Program of China (No.2009-37)
文摘Since the assumption of plane sections cannot be applied to the strain of unbonded tendons in prestressed concrete beams subjected to loadings,a moment-curvature nonlinear analysis method is used to develop analytical programs from stress increases in unbonded tendons at the ultimate limit state.Based on the results of model testing and simulation analysis,equations are proposed to predict the stress increase in tendons at the ultimate state in simple or continuous beams of partially prestressed concrete,considering the loading type,non-prestressed reinforcement index βp,prestressing reinforcement index βs,and span-depth ratio L/h as the basic parameters.Results of 380 beams studied here and test results for 35 simple beams obtained by the China Academy of Building Research were compared with those from prediction equations given in codes and other previous studies.The comparison reveals that the values predicted by the proposed equations agree well with experimental results.
文摘With a concrete pavement slab prestressed, its load carrying capacity can be significantly increased; thus a thinner slab may be used for the same loading. Prestressing modify the structural behavior of the pavement slab and there is a greater resistance to impact, vibration and overloading. This paper discusses the major design considerations necessary in the successful construction of prestressed concrete pavements and presents a design procedure developed to predict the compressive stress due to prestressing in the pavements at early stage, during service and after cracking. Variation in the approach for repetitive and nonrepetitive loads is clearly distinguished. Check on the recovery after cracking for overloading in prestressed pavements is also needed. Finally, a design example is illustrated the application of the approach developed.
文摘This work is aimed at studying the strengthening of reinforced concrete (R. C.) beams using prestressed glass fi- ber-reinforced polymer (PGFRP). Carbon fiber-reinforced polymer (CFRP) has recently become popular for use as repair or rehabilitation material for deteriorated R. C. structures, but because CFRP material is very stiff, the difference in CFRP sheet and concrete material properties is not favorable for transferring the prestress from CFRP sheets to R. C. members. Glass fi- ber-reinforced polymer (GFRP) sheets with Modulus of Elasticity quite close to that of concrete was chosen in this study. The load-carrying capacities (ultimate loads) and the deflections of strengthened R. C. beams using GFRP and PGFRP sheets were tested and compared. T- and ⊥-shaped beams were used as the under-strengthened and over-strengthened beams. The GFRP sheets were prestressed to one-half their tensile capacities before being bonded to the T- and ⊥-shaped R. C. beams. The prestressed tension in the PGFRP sheets caused cambers in the R. C. beams without cracks on the tensile faces. The PGFRP sheets also enhanced the load-carrying capacity. The test results indicated that T-shaped beams with GFRP sheets increased in load-carrying capacity by 55% while the same beams with PGFRP sheets could increase load-carrying capacity by 100%. The ⊥-shaped beams with GFRP sheets could increase load-carrying capacity by 97% while the same beams with PGFRP sheets could increase the loading-carrying capacity by 117%. Under the same external loads, beams with GFRP sheets underwent larger deflections than beams with PGFRP sheets. While GFRP sheets strengthen R. C. beams, PGFRP sheets decrease the beams’ ductility, especially for the over-strengthened beams (⊥-shaped beams).
基金National Natural Science Foundation of China Under Grant No.50575101Transportation Science Research Item of Jiangsu Province Under Grant No.06Y20
文摘The dynamic finite element model （FEM） of a prestressed concrete continuous box-girder bridge, called the Tongyang Canal Bridge, is built and updated based on the results of ambient vibration testing （AVT） using a real-coded accelerating genetic algorithm （RAGA）. The objective functions are defined based on natural frequency and modal assurance criterion （MAC） metrics to evaluate the updated FEM. Two objective functions are defined to fully account for the relative errors and standard deviations of the natural frequencies and MAC between the AVT results and the updated FEM predictions. The dynamically updated FEM of the bridge can better represent its structural dynamics and serve as a baseline in long-term health monitoring, condition assessment and damage identification over the service life of the bridge .
基金strongly supported by the National Natural Science Foundation of China(Project No.41672320 and 41877280)the National Key R&D Program of China(NO.2018YFC0407002)+3 种基金the Foreign experts Program of Hubei Province(WGZJ2020000011)the Fundamental Research Funds for Central Public Welfare Research Institutes(CKSF 2019180/YT)the Research and Transformation Project of the Changjiang River Scientific Research Institute(CKZS2017007/YT)the Innovation Team Project of the Changjiang River Scientific Research Institute(CKSF2017066/YT)。
文摘The long-term stability of a prestressed anchored slope might be influenced by the durability of the anchorage structure.To understand long-term stability of anchored rock slopes,the research presented herein evaluated the performance evolution of a prestressed anchored bedding slope system in a corrosive environment by model test.The corrosion process in a prestressed anchor bar was monitored in terms of its open-circuit potential(OCP),corrosion current density(CCD),and electrochemical impedance spectroscopy(EIS).The stability of the prestressed anchored slope was evaluated by monitoring changes in anchorage force and displacements.The experimental results show that prestress and oxygen could reduce the corrosion resistance of the anchor bar,and anchor bars in a chloride-rich environment are very susceptible to corrosion.Prestressed tendons in a corrosive environment suffer a loss of anchorage force,the prestress decreases rapidly after locking,and the rate thereof decreases until stabilising;in the later stage,corrosion leads to the reduction of the cross-sectional area of the steel bar which may cause the reduction in anchorage force again.Anchorage force controls the deformation and stability of the anchored slope,the prestress loss caused by later corrosion may lead to an increased rate of displacement and stability degradation of the prestressed anchored rock slope.
文摘Prestressed wire winded framework （PWWF） is an advanced structure and the most expensive part in the large-scale equip- ment. The traditional design of PWWF is complicated, highly iterative and cost uncontrolable, because PWWF is a variable stiffness multi-agent structure, with non-linear loading and deformation coordination. In this paper, cost optimization method of large-scale PWWF by multiple-island genetic algorithm （MIGA） is presented. Optimization design flow and optimization model are proposed based on variable-tension wire winding theory. An example of the PWWF cost optimization of isostatic equipment with axial load 6 000 kN is given. The optimization cost is reduced by 21.6% compared with traditional design. It has also been verified by the finite-element analysis and successfully applied to an actual PWWF design of isostatic press. The results show that this method is efficient and reliable. This method can also provide a guide for optimal design for ultra-large dimension muti-frame structure of 546 MN and 907 MN isostatic press equipment.
基金supported by the National Natural Science Foundation of China (No.50808090)
文摘A dynamic test on externally prestressed simply supported concrete beams separately with three typical types of tendon distributions was conducted. The results show that the natural frequencies of the beams increase with the increase in the prestressing force at the tensioning stage, and the natural frequencies decrease after the cracks occur in the beams. Following the calculation formula of natural frequency of externally prestressed beam, which was reported in a literature, the natural frequencies of the experimental beams are calculated, and big errors are found between the test results and the calculated ones of natural frequency values. As a result, this paper has tried to adopt two methods to correct the rigidity parameter of the concrete beam in the formula for natural frequency calculation, and to use the corrected formula to calculate the frequencies of the experimental beams. The calculation results indicate a good consistency with the experimental ones, which verifies the feasibility of the corrected formula.
基金The project was financially supported by the National Natural Science Foundation of China(Grant No.59895410)
文摘This paper presents an experimental study of a prestressed lightweight concrete platform model with a tank and for five steel-columns. This platform can be used not only for extraction but also for storage of oil and is suitable for the Bohai Sea and other shallow seas of China. The platform is subjected to temperature. load, or both. The corresponding temperature distribution. strains, cracks. and vulnerable parts of the platform are analyzed respectively. By use of the finite element method and empirical formulas, the temperature field of the model is analyzed. The results agree with the experimental results, thereby verifying! the reliability of these two calculating methods. The paper provides an experimental basis for the des sign of the bearing capacity and normal service state of prestressed concrete platforms.
基金In the process,this project was supported by the Fundamental Research Funds for the Central Universities(2572017DB02)the natural science foundation of heilongjiang province(LH2019E005)Harbin science and technology innovation talent fund project(2017RAQXJ086).
文摘Creep is an important characteristic of bamboo and wood materials under long-term loading.This paper aims to study the long-term bending beha-viour of prestressed glulam bamboo-wood beam(GBWB).For this,14 pre-stressed GBWBs were selected and subjected to a long-term loading test for 60 days.Then,a comparative analysis was performed for the effects of pre-tension values,the number of pre-stressed wires,and long-term load on the stress variation of the steel wire and the long-term deflection of the beam midspan.The test results showed that with the number of prestressed wires increasing,the total stress of the steel wire in the beam midspan and the ratio of the long-term deflec-tion to the total deflection decreases decreased,but when the number of steel wires exceeded 4,the total stress and long-term deflection was less infuenced;with the pre-tension value increasing,the ratio of the total stress of the steel wire in the beam midspan and the ratio of the long-temm deflection to the total deflec-tion also decreased,but when the prestress force was greater than 3.975 kN,the:total stress and long-term deflection were less affected;with the other parameters unchanged,when the value of the long-term load increased,the total stress of the steel wire decreased,and the long-temm deflection of the beam midspan increased,which shall be more significant with the long-term load greater than 30%of the standard ultimate bearing capacity.After the test,the experimental data were fitted,and the creep coefficient was given.Finally,the long-term stiffness calcula-tion fommula of the pre-stressed GBWB based on creep effect was proposed.The research findings have certain theoretical significance and engineering value.
基金Project(51705248) supported by the National Natural Science Foundation of ChinaProject(BK20170785) supported by the Natural Science Foundation of Jiangsu Province,China+2 种基金Project(BE2016179) supported by the Science and Technology Planning Project of Jiangsu Province,ChinaProject(Kfkt2017-08) supported by the Open Research Fund of State Key Laboratory for High Performance Complex Manufacturing,Central South University,ChinaProject(90YAH17038) supported by the Scientific Research Staring Foundation for Talent Introduction of Nanjing University of Aeronautics and Astronautics,China
文摘The elastic prestressed ultrasonic peen forming(UPF)was adopted in order to solve problems of insufficient bending deformation and large spherical deformation of plate during free UPF.The theoretical analysis of prestressed UPF and the influence of elastic prebending moment on deformation were analyzed.Spherical deformation coefficient was defined to quantificationally describe the spherical deformation.Experiments were conducted to compare the differences between free UPF and prestressed UPF processes and the effects of processing parameters on bending curvature and spherical deformation coefficient were studied.The results show that peening trajectory in chordwise direction is beneficial to enlarging spanwise bending deformation and decreasing spherical deformation coefficient.Large prebending curvature is helpful to increase spanwise bending deformation and decrease chordwise deformation,thereby obviously decreasing spherical deformation coefficient.Large spanwise deformation can be obtained under large firing pin velocity,small plate thickness and small offset distance.Large firing pin velocity plays a positive role in decreasing spherical deformation,while plate thickness and offset distance have little effect on it.Above all,prebending curvature and peening trajectory are the most important factors during prestressed UPF process.This study provides guidance for parameters optimization of prestressed UPF for wing plate with large thickness.
基金supported by the National Natural Science Foundation of China(No.52074292)National Key Research and Development Program(No.2017YFC1503103)。
文摘Prestressed anchor cables are widely used for slope reinforcement,but the loss of prestress makes it difficult to guarantee the reinforcement effect.Anchor cable prestress degradation was considered as a stochastic process,and the probability density function of this process was established using gamma theory and impact theory respectively.Combined with the failure threshold,the probability density was integrated to find the time-dependent reliability of the anchor cable.Based on the monitoring data of the prestress degradation of the anchor cable,parameters in the probability density function were solved by the maximum likelihood method,and the time-varying reliability and service life of the anchor cable were obtained analytically.The applicability of two degradation theories,gamma stochastic process and impact theory,was compared.The results showed that the probability density curves of both degradation models were normally distributed and the error of reliability results did not exceed 0.06.The life prediction results of the gamma stochastic process were closer to the actual life of 400 h than the 500 h of the impact theory,and the probability curves of the anchor cable life also indicated that the impact theory overestimated the service life probability of the anchor cable.Taking the anchor cable reinforcement within the slope of the Dagushan open-pit mine as an example,and the results verify the feasibility of using gamma theory to predict the degradation of anchor cables and provides theoretical support for prevention of the degradation of anchor cables in the slope of an open-pit mine under the action of external forces.
