Liquid carboxyl-terminated poly（butadiene-co-acrylonitrile）（CTBN）-epoxy resin（EP） prepolymers were prepared with different contents of CTBN.The chemical reactions between EP and CTBN were characterized by Fourie...Liquid carboxyl-terminated poly（butadiene-co-acrylonitrile）（CTBN）-epoxy resin（EP） prepolymers were prepared with different contents of CTBN.The chemical reactions between EP and CTBN were characterized by Fourier ransform infrared（FTIR） spectroscopy and gel permeation chromatography（GPC）.The scanning electron micrograph（SEM） and dynamic mechanical analysis（DMA） of curing films showed phase separation,and the rubber particles were finely dispersed in the epoxy matrix.Mechanical properties analysis of curing films showed that impact strength and elongation at break increased significantly upon the addition of CTBN,indicating good toughness of the modified epoxy resins.Thermogravimetric analysis（TGA） showed that the incorporation of CTBN had little effect on the thermal stability of EP.Fusion-bonded-epoxy（FBE） powder coatings modified with CTBN-EP prepolymers were prepared.The experimental results demonstrate the ability of CTBN-EP prepolymers,toughening technology to dramatically enhance the flexibility and impact resistance of FBE coatings without compromising other key properties such as corrosion protection.展开更多
CTBN-EP prepolymers were synthesized from CTBN and epoxy resin under the catalysis of HTMAB. FTIR analyses indicate the formation of ester group between the carboxyl group of CTBN and the oxirane group of epoxy resin....CTBN-EP prepolymers were synthesized from CTBN and epoxy resin under the catalysis of HTMAB. FTIR analyses indicate the formation of ester group between the carboxyl group of CTBN and the oxirane group of epoxy resin. The viscosity of modified prepolymer increases with CTBN content increasing, but the epoxy value of the prepolymer decreases greatly. DSC analyses verify that CTBN affects the curing process of CTBN-EP/PEA system. Mechanical testing presents the improved toughness of CTBN-EP/PEA curings for the decrease of tensile strength, flexural strength and compressive strength, and increase of impact strength and elongation-at-break with the CTBN content increasing. SEM micrographs show the rubber phase with many holes in diameter about 0.5-1.5 μm is formed when CTBN content is lower than 10 phr. However, the pattern of SEM graph shows some stalactite-like strips when CTBN content is higher than 15 phr. Furthermore, the SEM image of 25 phr CTBN sample forms a kind of co-continuous structure.展开更多
Isocyanate and its products are playing an increasingly important role in the high-performance development of asphalt pavement,but researchers have always focused on polyurethane(PU),one of the isocyanate products,and...Isocyanate and its products are playing an increasingly important role in the high-performance development of asphalt pavement,but researchers have always focused on polyurethane(PU),one of the isocyanate products,and neglected the other roles of isocyanate-based materials in asphalt pavement.The application of isocyanate-based materials in asphalt pavement is still in the exploratory stage,and the research direction is not clear.It is necessary to summarize and propose research directions for the application of isocyanate-based materials in asphalt pavement.Therefore,this paper reviews the application of isocyanate-based materials in asphalt pavement,classifies the products synthesized from isocyanate for asphalt binder,introduces the application effects of different isocyanate-based materials in asphalt binder,and analyzes the limitations of each material.Meanwhile,the other roles of isocyanate-based materials in asphalt pavement,such as coating materials and adhesive materials,are summarized.Finally,the development direction of isocyanate-based materials in asphalt pavement is prospected.Isocyanate-based materials are expected to significantly increase the service life of asphalt pavement because of their excellent properties.With the advancement of technology,the application of isocyanate-based materials will become more and more common,promoting the sustainable development of road construction.This paper can provide a reference for the development and application of isocyanate-based materials in asphalt pavement.展开更多
A novel UV-curable prepolymer polypropyleneglycol diglycidyl ether diacrylate （PPGGEA） was synthesized by utilizing polypropyleneglycol diglycidyl ether （PPGGE） and acrylic acid （AA） as starting materials, N, N-...A novel UV-curable prepolymer polypropyleneglycol diglycidyl ether diacrylate （PPGGEA） was synthesized by utilizing polypropyleneglycol diglycidyl ether （PPGGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were in the following： the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ~C, and the molar ratio of PPGGE to AA was 1：2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized PPGGEA to prepare a kind of UV-cured coating. The mechanical properties of the UV-cured films were determined, giving 29.99 MPa of tensile strength, 834.27 MPa of the Young＇s modulus and 5.66% of elongation at tear.展开更多
The Chinese fir wood was impregnated using a cyclic increasingpressure method(CIPM)with phenolic prepolymers as the impregnating modifier.Unmodified Chinese fir and progressive increasing-pressure method(PIPM)impregna...The Chinese fir wood was impregnated using a cyclic increasingpressure method(CIPM)with phenolic prepolymers as the impregnating modifier.Unmodified Chinese fir and progressive increasing-pressure method(PIPM)impregnated Chinese fir were used as reference samples and were compared and analyzed.The product’s chemical structure,internal morphology,crystal structure,and heat resistance were characterized.The transversal and longitudinal sections showed better filling effects,so that it bore greater external loading and reduced the water storage space.CIPM infused more phenolic prepolymer into the Chinese fir.Not only producing more physical filling but also forming more hydrogen bond associations and chemical bond combinations.Compared with PIPM and unmodi-fied Chinese fir,the CIPM impregnated Chinese fir had better mechanical strength and water resistance.The cellulose chains in CIPM impregnated Chinese fir were more closely linked and their crystallinity were clearly improved.Changes in internal morphology and crystal structure explained the reason why the mechanical properties and water resistance of CIPM impregnated Chinese fir were improved significantly.This Chinese fir had lower thermal decomposition rates,higher decomposition residual rates,and smaller combustion flames,which confirmed that it possessed improved heat and fire resistance.展开更多
A novel UV-curable prepolymer hexanediol diglycidyl ether diacrylate （HDGEA） was synthesized by utilizing hexanediol diglycidyl ether （HDGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine ...A novel UV-curable prepolymer hexanediol diglycidyl ether diacrylate （HDGEA） was synthesized by utilizing hexanediol diglycidyl ether （HDGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimal synthetic conditions were that the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ℃, and the molar ratio of HDGE to AA was 1︰2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-curing initiator was added to the synthesized HDGEA to prepare a kind of UV-curing coating. The mechanical properties of the UV-cured films were determined, giving 31.87 MPa of tensile strength, 871.88 MPa of Young＇s modulus and 6.77% of elongation at tear.展开更多
A new improved polyester casting bandage, which comprises a knitted polyester substrate coated with polyurethane prepolymer, was developed. The appropriate polyester knitted substrate was selected firstly; the optimal...A new improved polyester casting bandage, which comprises a knitted polyester substrate coated with polyurethane prepolymer, was developed. The appropriate polyester knitted substrate was selected firstly; the optimal ingredient for the synthesis of coating resin (polyurethane prepolymer) was determined then through a series of trial experiments and factorial experiments; the properties of bandage were checked at last. The results of the experiment indicate that most of the properties of the new product could exceed or approximate to the level of similar product of other countries.展开更多
Polyazoamide（PAA） was used as initiator to prepare block copolymer P（MMA-b-St） byfree radical polymerization. The fraction of block copolymer was about 50%. The structureof the block-copolymer was characterized by...Polyazoamide（PAA） was used as initiator to prepare block copolymer P（MMA-b-St） byfree radical polymerization. The fraction of block copolymer was about 50%. The structureof the block-copolymer was characterized by IR and the results of;H-NMR and GPCshowed that the content of the block and the molecular weight （M;） of the prepolymerand block copolymer could be controlled by varying the mol ratio of styrene/PAA andMMA/prepolymer. DSC and TEM results revealed that the block copolymer has twoseparated glass transition temperatures and phase separation within the domain structure.展开更多
In this paper, polyurethane resins were synthesized from liquefied benzylated wood and TD1 (toluene diisocyanate)-TMP (trihydromethylene propane) prepolymer. And the relation between microphase structure and propertie...In this paper, polyurethane resins were synthesized from liquefied benzylated wood and TD1 (toluene diisocyanate)-TMP (trihydromethylene propane) prepolymer. And the relation between microphase structure and properties of PU samples were also studied. The results indicated that coatings obtained had good mechanical and thermal properties. The amount of the curing agent has great effect on the degree of phase segregation. In addition, with increased the curing agent amount, the thermal stabilities were also improved.展开更多
Nano-ZrO2 particles were modified by poly(ethylene terephalate) prepolymer(pre-PET) via polycondensation.FT-IR,TEM,and TGA results showed that pre-PET was successfully grafted on the surface of nano-ZrO2particles.Comp...Nano-ZrO2 particles were modified by poly(ethylene terephalate) prepolymer(pre-PET) via polycondensation.FT-IR,TEM,and TGA results showed that pre-PET was successfully grafted on the surface of nano-ZrO2particles.Compared to the original nano-ZrO2,the grafted nano-ZrO2 had better compatibility with the polycarbonate(PC) matrix and could be dispersed more homogeneously in PC.Hence,interfacial adhesion between ZrO2 and PC was enhanced.The mechanical properties of the resultant PC/nano-ZrO2 composite like tensile strength and notched impact strength were greatly improved.Calculated respectively from tensile yield stress PC/nano-ZrO2 composites,the interfacial interaction parameter B was employed to quantitatively characterize the effective interfacial interaction between the nano-ZrO2 and PC matrix.展开更多
A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylam...A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were taken as follows: The concentration of N,N-dimethylbenzylamine, 0.80% of reactants; the concentration of p-hydroxyanisole, 0.3% of reactants; the reaction temperature, 90-110 ; the molar ratio of NPGGE to AA, 1:2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized NPGGEA to prepare a kind of UV-cured coating. Mechanical properties of the UV-cured films were determined, giving 28.75 MPa of tensile strength, 923.82 MPa of Young’s modulus and 5.51% of elongation at tear.展开更多
Poly(ethylene oxide) containing azogroups(pre PEO) was prepared by reacting azoisobutyronitrile (AIBN) with poly( ethylene glycol ) (PEG). The molecular weight of pre PEO was depended on the reaction time, the ratio...Poly(ethylene oxide) containing azogroups(pre PEO) was prepared by reacting azoisobutyronitrile (AIBN) with poly( ethylene glycol ) (PEG). The molecular weight of pre PEO was depended on the reaction time, the ratio of PEG to AIBN and the molecular weight of PEG. Pre PEO decomposed in the presence of butylacrylate (BA) monomer to form poly ethylene oxide block butylacrylate copolymers(PEO b PBA). The molecular weights of PEO b PBA and the homopolymer of PBA were proportional to the ratio of BA to pre PEO. The purified block copolymers were charactherized using IR, 1H NMR and GPC.展开更多
1 Results The production of rubber is very high and rises every year. Among other things it is directly connected with the growth of car production. Therefore, the processing of waste rubber and its management must be...1 Results The production of rubber is very high and rises every year. Among other things it is directly connected with the growth of car production. Therefore, the processing of waste rubber and its management must be treated as a global problem. Used rubber may replace conventional fuel and, owing to its low price, can improve the economic effectiveness of combustion. Energy recovery by combustion of car tyres allows for rapid management of rubber waste. However, it is well-known that all kinds of wast...展开更多
基金Funded by the National Science and Technology Pillar Program of China(No.2007BAE15B02)
文摘Liquid carboxyl-terminated poly（butadiene-co-acrylonitrile）（CTBN）-epoxy resin（EP） prepolymers were prepared with different contents of CTBN.The chemical reactions between EP and CTBN were characterized by Fourier ransform infrared（FTIR） spectroscopy and gel permeation chromatography（GPC）.The scanning electron micrograph（SEM） and dynamic mechanical analysis（DMA） of curing films showed phase separation,and the rubber particles were finely dispersed in the epoxy matrix.Mechanical properties analysis of curing films showed that impact strength and elongation at break increased significantly upon the addition of CTBN,indicating good toughness of the modified epoxy resins.Thermogravimetric analysis（TGA） showed that the incorporation of CTBN had little effect on the thermal stability of EP.Fusion-bonded-epoxy（FBE） powder coatings modified with CTBN-EP prepolymers were prepared.The experimental results demonstrate the ability of CTBN-EP prepolymers,toughening technology to dramatically enhance the flexibility and impact resistance of FBE coatings without compromising other key properties such as corrosion protection.
基金Funded by the Defense Advanced Research Project (No.51312040404)
文摘CTBN-EP prepolymers were synthesized from CTBN and epoxy resin under the catalysis of HTMAB. FTIR analyses indicate the formation of ester group between the carboxyl group of CTBN and the oxirane group of epoxy resin. The viscosity of modified prepolymer increases with CTBN content increasing, but the epoxy value of the prepolymer decreases greatly. DSC analyses verify that CTBN affects the curing process of CTBN-EP/PEA system. Mechanical testing presents the improved toughness of CTBN-EP/PEA curings for the decrease of tensile strength, flexural strength and compressive strength, and increase of impact strength and elongation-at-break with the CTBN content increasing. SEM micrographs show the rubber phase with many holes in diameter about 0.5-1.5 μm is formed when CTBN content is lower than 10 phr. However, the pattern of SEM graph shows some stalactite-like strips when CTBN content is higher than 15 phr. Furthermore, the SEM image of 25 phr CTBN sample forms a kind of co-continuous structure.
基金The authors are appreciative of the financial assistance granted by the National Natural Science Foundation of China(No.52378462)Guangdong Basic and Applied Basic Research Foundation(No.2023A1515011448).
文摘Isocyanate and its products are playing an increasingly important role in the high-performance development of asphalt pavement,but researchers have always focused on polyurethane(PU),one of the isocyanate products,and neglected the other roles of isocyanate-based materials in asphalt pavement.The application of isocyanate-based materials in asphalt pavement is still in the exploratory stage,and the research direction is not clear.It is necessary to summarize and propose research directions for the application of isocyanate-based materials in asphalt pavement.Therefore,this paper reviews the application of isocyanate-based materials in asphalt pavement,classifies the products synthesized from isocyanate for asphalt binder,introduces the application effects of different isocyanate-based materials in asphalt binder,and analyzes the limitations of each material.Meanwhile,the other roles of isocyanate-based materials in asphalt pavement,such as coating materials and adhesive materials,are summarized.Finally,the development direction of isocyanate-based materials in asphalt pavement is prospected.Isocyanate-based materials are expected to significantly increase the service life of asphalt pavement because of their excellent properties.With the advancement of technology,the application of isocyanate-based materials will become more and more common,promoting the sustainable development of road construction.This paper can provide a reference for the development and application of isocyanate-based materials in asphalt pavement.
基金the Innovatory Group Program of the Natural Science Foundation of Hubei Province(No.2004ABC001)the National"863"Hi-tech Foundation of China(No.2002AA6Z3083)
文摘A novel UV-curable prepolymer polypropyleneglycol diglycidyl ether diacrylate （PPGGEA） was synthesized by utilizing polypropyleneglycol diglycidyl ether （PPGGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were in the following： the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ~C, and the molar ratio of PPGGE to AA was 1：2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized PPGGEA to prepare a kind of UV-cured coating. The mechanical properties of the UV-cured films were determined, giving 29.99 MPa of tensile strength, 834.27 MPa of the Young＇s modulus and 5.66% of elongation at tear.
基金This work was financially supported by Hunan Provincial Technical Innovation Platform and Talent Program in Science and Technology,China(2019RS2040)the National Natural Science Foundation of China(31770606)Major Science and Technology Program of Hunan Province,PR China(2017NK1010).
文摘The Chinese fir wood was impregnated using a cyclic increasingpressure method(CIPM)with phenolic prepolymers as the impregnating modifier.Unmodified Chinese fir and progressive increasing-pressure method(PIPM)impregnated Chinese fir were used as reference samples and were compared and analyzed.The product’s chemical structure,internal morphology,crystal structure,and heat resistance were characterized.The transversal and longitudinal sections showed better filling effects,so that it bore greater external loading and reduced the water storage space.CIPM infused more phenolic prepolymer into the Chinese fir.Not only producing more physical filling but also forming more hydrogen bond associations and chemical bond combinations.Compared with PIPM and unmodi-fied Chinese fir,the CIPM impregnated Chinese fir had better mechanical strength and water resistance.The cellulose chains in CIPM impregnated Chinese fir were more closely linked and their crystallinity were clearly improved.Changes in internal morphology and crystal structure explained the reason why the mechanical properties and water resistance of CIPM impregnated Chinese fir were improved significantly.This Chinese fir had lower thermal decomposition rates,higher decomposition residual rates,and smaller combustion flames,which confirmed that it possessed improved heat and fire resistance.
基金Funded by the Natural Science Foundation of Jiangxi Province (No.2008GZC0021)the National "863" Hi-tech Foundation of China (No.2002AA6Z3083)
文摘A novel UV-curable prepolymer hexanediol diglycidyl ether diacrylate （HDGEA） was synthesized by utilizing hexanediol diglycidyl ether （HDGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimal synthetic conditions were that the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ℃, and the molar ratio of HDGE to AA was 1︰2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-curing initiator was added to the synthesized HDGEA to prepare a kind of UV-curing coating. The mechanical properties of the UV-cured films were determined, giving 31.87 MPa of tensile strength, 871.88 MPa of Young＇s modulus and 6.77% of elongation at tear.
文摘A new improved polyester casting bandage, which comprises a knitted polyester substrate coated with polyurethane prepolymer, was developed. The appropriate polyester knitted substrate was selected firstly; the optimal ingredient for the synthesis of coating resin (polyurethane prepolymer) was determined then through a series of trial experiments and factorial experiments; the properties of bandage were checked at last. The results of the experiment indicate that most of the properties of the new product could exceed or approximate to the level of similar product of other countries.
文摘Polyazoamide（PAA） was used as initiator to prepare block copolymer P（MMA-b-St） byfree radical polymerization. The fraction of block copolymer was about 50%. The structureof the block-copolymer was characterized by IR and the results of;H-NMR and GPCshowed that the content of the block and the molecular weight （M;） of the prepolymerand block copolymer could be controlled by varying the mol ratio of styrene/PAA andMMA/prepolymer. DSC and TEM results revealed that the block copolymer has twoseparated glass transition temperatures and phase separation within the domain structure.
基金The author thanks the Tianjin Natural Science Foundation for the financial support(Project No.013801411) the help ofTianjin Beacon Paint＆Coatings Co．，Ltd．
文摘In this paper, polyurethane resins were synthesized from liquefied benzylated wood and TD1 (toluene diisocyanate)-TMP (trihydromethylene propane) prepolymer. And the relation between microphase structure and properties of PU samples were also studied. The results indicated that coatings obtained had good mechanical and thermal properties. The amount of the curing agent has great effect on the degree of phase segregation. In addition, with increased the curing agent amount, the thermal stabilities were also improved.
基金Innovative Team Project of Science and Technology Commission of Shanghai, China(No.06DZ05902)
文摘Nano-ZrO2 particles were modified by poly(ethylene terephalate) prepolymer(pre-PET) via polycondensation.FT-IR,TEM,and TGA results showed that pre-PET was successfully grafted on the surface of nano-ZrO2particles.Compared to the original nano-ZrO2,the grafted nano-ZrO2 had better compatibility with the polycarbonate(PC) matrix and could be dispersed more homogeneously in PC.Hence,interfacial adhesion between ZrO2 and PC was enhanced.The mechanical properties of the resultant PC/nano-ZrO2 composite like tensile strength and notched impact strength were greatly improved.Calculated respectively from tensile yield stress PC/nano-ZrO2 composites,the interfacial interaction parameter B was employed to quantitatively characterize the effective interfacial interaction between the nano-ZrO2 and PC matrix.
基金supported by the National High-Technology Research and Development Program of China (Grant No.2002AA6Z3083)
文摘A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were taken as follows: The concentration of N,N-dimethylbenzylamine, 0.80% of reactants; the concentration of p-hydroxyanisole, 0.3% of reactants; the reaction temperature, 90-110 ; the molar ratio of NPGGE to AA, 1:2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized NPGGEA to prepare a kind of UV-cured coating. Mechanical properties of the UV-cured films were determined, giving 28.75 MPa of tensile strength, 923.82 MPa of Young’s modulus and 5.51% of elongation at tear.
文摘Poly(ethylene oxide) containing azogroups(pre PEO) was prepared by reacting azoisobutyronitrile (AIBN) with poly( ethylene glycol ) (PEG). The molecular weight of pre PEO was depended on the reaction time, the ratio of PEG to AIBN and the molecular weight of PEG. Pre PEO decomposed in the presence of butylacrylate (BA) monomer to form poly ethylene oxide block butylacrylate copolymers(PEO b PBA). The molecular weights of PEO b PBA and the homopolymer of PBA were proportional to the ratio of BA to pre PEO. The purified block copolymers were charactherized using IR, 1H NMR and GPC.
文摘1 Results The production of rubber is very high and rises every year. Among other things it is directly connected with the growth of car production. Therefore, the processing of waste rubber and its management must be treated as a global problem. Used rubber may replace conventional fuel and, owing to its low price, can improve the economic effectiveness of combustion. Energy recovery by combustion of car tyres allows for rapid management of rubber waste. However, it is well-known that all kinds of wast...
