Objectives A systematic review and network meta-analysis was conducted to evaluate the effectiveness of different childbirth positions in reducing the duration of the second stage of labor,providing evidence-based ins...Objectives A systematic review and network meta-analysis was conducted to evaluate the effectiveness of different childbirth positions in reducing the duration of the second stage of labor,providing evidence-based insights for obstetric institutions to guide interventions related to childbirth positions.Methods A comprehensive literature search was conducted in databases,including PubMed,Web of Science,the Cochrane Library,Embase,Wanfang Databases,China National Knowledge Infrastructure Databases(CNKI),China Science and Technology Journal Database(CSTJ),and China Biology Medicine disc(CBMdisc)to identify studies on the effectiveness of different childbirth positions in reducing the duration of the second stage of labor.The search included randomized controlled trials published from database inception to September 30,2024.The Cochrane risk-of-bias tool was used to assess the quality of the studies.Two independent reviewers screened the literature,extracted data,and evaluated study quality.Subsequently,a network meta-analysis was performed using STATA software.The study protocol has been registered in PROSPERO(CRD42023428217).Results This study analyzed data from 25 randomized controlled trials involving 9,844 women.The findings indicated that in comparison to lithotomy position,free position(MD=20.53,95%CI[11.38,29.68])and upright position(MD=−24.13,95%CI[−42.94,-5.32])were found to be superior in reducing the duration of the second stage of labor.Free position outperformed kneeling position(MD=21.48,95%CI[4.67,38.28])and squatting position(MD=23.43,95%CI[1.88,44.97]);upright position was superior to kneeling position(MD=−25.08,95%CI[−46.93,−3.22]);semirecumbent position surpassed squatting position(MD=19.71,95%CI[2.05,37.38]);and upright position was also superior to squatting position(MD=−27.03,95%CI[−51.48,−2.57]).According to the surface under the cumulative ranking curve(SUCRA),the upright position emerged as the most effective for reducing the duration of the second stage of labor(87.4%),followed by free position(81.1%),semirecumbent position(70.0%),and lateral position(62.3%).Conclusion These findings offer valuable insights for midwifery practice and help inform future research directions.Considering the limitations of this review,more larger-scale,multicenter randomized controlled trials are warranted to further evaluate the relative effectiveness of different childbirth positions in reducing the duration of the second stage of labor.展开更多
Granite residual soil slope is often destroyed,which poses great threats to Rong County in southeastern Guangxi,China.Heavy rainfall and fissures are the major triggering and internal factors.The fissure that controls...Granite residual soil slope is often destroyed,which poses great threats to Rong County in southeastern Guangxi,China.Heavy rainfall and fissures are the major triggering and internal factors.The fissure that controls the slope stability and the associated failure mechanisms remain unclear.The purpose of this study was to identify the controlling fissures through field investigation,elucidate the effect of its position,and analyze the failure process and hydrological response of residual soil slope through artificial flume model tests.The results comprised five aspects.(1)Surface weathering and unloading fissures could affect slope stability.(2)The failure processes with different fissure positions exhibited inconsistent characteristics.(3)The volume moisture content(VMC)had the most direct response at the fissure tip.The corresponding infiltration rate was the highest.The response time of pore water pressure(PWP)was longer than that of VMC.Fluctuations in PWP were associated with VMC and changes in the soil microstructure due to local deformation.(4)Slope failure was accompanied by serious soil erosion.This could be attributed to the infiltration direction and the interaction between soil and water.(5)Fissured soil slopes experienced five similar failure processes:sheet erosion and partial failure of the slope foot,occurrence of preferential flow and enlargement of the sliding area,creep deformation and tension fissure emergence,block sliding and gully erosion,and flow-slip.展开更多
This paper delves into the problem of optimal placement conditions for a group of agents collaboratively localizing a target using range-only or bearing-only measurements.The challenge in this study stems from the unc...This paper delves into the problem of optimal placement conditions for a group of agents collaboratively localizing a target using range-only or bearing-only measurements.The challenge in this study stems from the uncertainty associated with the positions of the agents,which may experience drift or disturbances during the target localization process.Initially,we derive the Cramer-Rao lower bound(CRLB)of the target position as the primary analytical metric.Subsequently,we establish the necessary and sufficient conditions for the optimal placement of agents.Based on these conditions,we analyze the maximal allowable agent position error for an expected mean squared error(MSE),providing valuable guidance for the selection of agent positioning sensors.The analytical findings are further validated through simulation experiments.展开更多
The stable coordinated metallo-complexes based on 2,2′:6′,2″-terpyridine(tpy)and its derivatives have been widely researched for various wide-ranging applications in photoelectronics,catalysis,sensor,photoluminesce...The stable coordinated metallo-complexes based on 2,2′:6′,2″-terpyridine(tpy)and its derivatives have been widely researched for various wide-ranging applications in photoelectronics,catalysis,sensor,photoluminescence,and so on.However,the most reported studies ignored the comprehensive comparison between structures modified by different positions and photoluminescence.Herein,we design a series of metallo-complexes which were assembled with tpy substituted triphenylamine(TPA)at different positions and metal ions and explored their photophysical properties.In the solution state,MLE_(2)based on the 5,5″-positions modification showed the highest PLQYs and PL intensity.With the increase of solvent polarity,MLB2exhibit the largest redshift.In the solid state,from MLA_(2)to MLE_(2),the emission colours are gradually red-shifted from yellow to red.The findings in this work may pave a new way to design functional metallo-complexes,not just for PL properties.展开更多
Grey Wolf Optimization (GWO) is a nature-inspired metaheuristic algorithm that has gained popularity for solving optimization problems. In GWO, the success of the algorithm heavily relies on the efficient updating of ...Grey Wolf Optimization (GWO) is a nature-inspired metaheuristic algorithm that has gained popularity for solving optimization problems. In GWO, the success of the algorithm heavily relies on the efficient updating of the agents’ positions relative to the leader wolves. In this paper, we provide a brief overview of the Grey Wolf Optimization technique and its significance in solving complex optimization problems. Building upon the foundation of GWO, we introduce a novel technique for updating agents’ positions, which aims to enhance the algorithm’s effectiveness and efficiency. To evaluate the performance of our proposed approach, we conduct comprehensive experiments and compare the results with the original Grey Wolf Optimization technique. Our comparative analysis demonstrates that the proposed technique achieves superior optimization outcomes. These findings underscore the potential of our approach in addressing optimization challenges effectively and efficiently, making it a valuable contribution to the field of optimization algorithms.展开更多
The influence of the panel position on the cooling performance of a radiant panel is analyzed.The coupled simulation of convection and radiation is set up by a computational fluid dynamics（CFD）method.The simulations...The influence of the panel position on the cooling performance of a radiant panel is analyzed.The coupled simulation of convection and radiation is set up by a computational fluid dynamics（CFD）method.The simulations with different panel positions and different indoor heat sources are used to calculate the cooling capacity of the radiant panel and the indoor thermal environment.The simulation results are in good agreement with the experimental results.The results show that when the indoor heat source temperature is low,the convective heat flux is the main influence factor of the cooling capacity and the radiant panel should be placed on the wall or on the ceiling.Otherwise,when the indoor heat source temperature is high,the radiation heat flux is the main factor and the radiant panel should be placed as near to the heat sources as possible.展开更多
Cotton growth and development are determined and influenced by cultivars, meteorological conditions, and management practices. The objective of this study was to quantify the optimum of temperature-light meteorologica...Cotton growth and development are determined and influenced by cultivars, meteorological conditions, and management practices. The objective of this study was to quantify the optimum of temperature-light meteorological factors for seedcotton biomass per boll with respect to boll positions. Field experiments were conducted using two cultivars of Kemian 1 and Sumian 15 with three planting dates of 25 April （mean daily temperature （MDT） was 28.0 and 25.4°C in 2010 and 2011, respectively）, 25 May （MDT was 22.5 and 21.2°C in 2010 and 2011, respectively）, and 10 Jun （MDT was 18.7 and 17.9°C in 2010 and 2011, respectively）, and under three shading levels （crop relative light rates （CRLR） were 100, 80, and 60％） during 2010 and 2011 cotton boll development period （from anthesis to boll open stages）. The main meteorological factors （temperature and light） affected seedcotton biomass per boll differently among different boll positions and cultivars. Mean daily radiation （MDR） affected seedcotton biomass per boll at all boll positions, except fruiting branch 2 （FB2） fruting node 1 （FN1）. However, its influence was less than temperature factors, especially growing degree-days （GDD）. Optimum mean daily maximum temperature （MDTmax） for seedcotton biomass per boll at FB11FN3 was 29.9-32.4°C, and the optimum MDR at aforementioned position was 15.8-17.5 MJ m-2. Definitely, these results can contribute to future cultural practices such as rational cultivars choice and distribution, simplifying field managements and mechanization to acquire more efficient and economical cotton management.展开更多
This paper describes systematic measurement of fiber migration and distribution pattern of twist at different radial positions of rotor spun yarn mixed tracer fiber by Hi-Scope Video Microscope System. The positions o...This paper describes systematic measurement of fiber migration and distribution pattern of twist at different radial positions of rotor spun yarn mixed tracer fiber by Hi-Scope Video Microscope System. The positions of tracer fibers were measured in three dimensions accurately, and the migration index and the twist distribution at different radial positions of rotor yarn were calculated and analyzed. This research result serves to provide useful references for further study on the structural mechanics of rotor spun yarn.展开更多
The uncertainty of observers＇ positions can lead to significantly degrading in source localization accuracy. This pa-per proposes a method of using self-location for calibrating the positions of observer stations in ...The uncertainty of observers＇ positions can lead to significantly degrading in source localization accuracy. This pa-per proposes a method of using self-location for calibrating the positions of observer stations in source localization to reduce the errors of the observer positions and improve the accuracy of the source localization. The relative distance measurements of the two coordinative observers are used for the linear minimum mean square error （LMMSE） estimator. The results of computer si-mulations prove the feasibility and effectiveness of the proposed method. With the general estimation errors of observers＇ positions, the MSE of the source localization with self-location calibration, which is significantly lower than that without self-location calibra-tion, is approximating to the Cramer-Rao lower bound （CRLB）.展开更多
To obtain the stable temperature field required for growing sapphire crystals, the influence of relative positions between RF coil and crucible on the performances of sapphires produced by edge-defined film-fed growth...To obtain the stable temperature field required for growing sapphire crystals, the influence of relative positions between RF coil and crucible on the performances of sapphires produced by edge-defined film-fed growth（EFG） technique was investigated. For comparison, the crucible was located at the top（case A） and the middle（case B） of the RF coil, respectively. Furthermore, the lattice integrities were studied by the double-crystal X-ray diffraction, and the dislocations were observed under the optical microscope and atomic force microscope after corroding in molten KOH at 390 ℃. The crystals in case B exhibit better lattice integrity with smaller full width at half maximum of 29.13 rad·s, while the value in case A is 45.17 rad·s. The morphologies of dislocation etch pits in both cases show typical triangular symmetry with smooth surfaces. However, the dislocation density of 2.8×104 cm-2 in case B is only half of that in case A, and the distribution is more uniform, compared to the U-shaper in case A.展开更多
Objective: To investigate the short-term efficacy of laparoscopic radical resection of right-sided colon cancer with two different surgeon positions and trocar placements. Methods: The data of 78 patients who underwen...Objective: To investigate the short-term efficacy of laparoscopic radical resection of right-sided colon cancer with two different surgeon positions and trocar placements. Methods: The data of 78 patients who underwent laparoscopic radical resection of right-sided colon cancer between January 2018 and August 2019 were retrospectively analysed. The surgical method was selected by the patients. The patients were divided into two groups according to the surgeons’ positioning habits and trocar placements. The group with the lead surgeon standing between the patient’s legs had 35 patients, and the group with the lead surgeon standing at the left side of the patient had 43 patients. The operation time, intraoperative blood loss, postoperative anal gas evacuation time, postoperative urinary catheter indwelling time, postoperative hospital stay, C-reactive protein (CRP) level on the first day after surgery, and postoperative pathological data and complications were compared between the two groups. Results: All patients underwent the laparoscopic radical resection of right-sided colon cancer, none converting to laparotomy. No significant difference (P > 0.05) in intraoperative blood loss (57.6 ± 21.3 ml vs 60.2 ± 35.3 ml), postoperative anal gas evacuation time (3.5 ± 1.1 d vs 3.8 ± 1.3 d), postoperative urinary catheter indwelling time (2.6 ± 1.3 d vs 2.4 ± 1.2 d), postoperative hospital stay (7.1 ± 1.8 d vs 7.5 ± 2.1 d), or CRP level on the first day after surgery (54.7 ± 9.6 mg/L vs 53.9 ± 8.2 mg/L) was detected between the two groups. The operation time was shorter in the group with the lead surgeon standing between the patient’s legs (185.2 ± 25.6 min vs 196.2 ±19.7 min) (P < 0.05). The two groups did not differ significantly in the tumour length (4.2 ± 1.3 cm vs 3.9 ± 1.5 cm), number of dissected lymph nodes (27.5 ± 11.6 vs 25.1 ± 15.4), pathological type, or postoperative pathological tumour-node-metastasis stage (P > 0.05). No patients died or had anastomotic fistula during their postoperative hospital stay, and the incidence of postoperative complications did not differ between the two groups (22.9% (8/35) vs 23.3% (10/42);P > 0.05). Conclusion: Under the principle of radical resection, the surgeon should adopt the most suitable standing position and trocar placement according to the specific situation. If the surgeon stands between the patient’s legs, this might shorten the operation time and promote a smoother surgery.展开更多
The plasma shape and other paremeters such as /3P, li is important for the tokamak deveice where the plasma has a non-circular cross-section of sufficient elongation. The measuered signals of magnetic probes and flux ...The plasma shape and other paremeters such as /3P, li is important for the tokamak deveice where the plasma has a non-circular cross-section of sufficient elongation. The measuered signals of magnetic probes and flux loops are used to reconstruct the plasma shape and the current profile in device operation and plasma shape feed back control system. So the number and positions of magnetic probes and flux loops provides the basis of the plasma reconstruction. This paper instroduce how to use EFIT code (equilibrium fitting code) to determine the number and positions of the magnetic probes and flux loops. The simulation result is given also.展开更多
Low-power Hall thruster(LHT) generally has poor discharge efficiency characteristics due to the large surface-to-volume ratio.Aiming to further refine and improve the performance of 300 W class LHT in terms of thrust ...Low-power Hall thruster(LHT) generally has poor discharge efficiency characteristics due to the large surface-to-volume ratio.Aiming to further refine and improve the performance of 300 W class LHT in terms of thrust and efficiency,and to obtain the most optimal operating point,the experimental study of the discharge characteristics for three different anode positions was conducted under the operation of various discharge voltages(100-400 V) and anode mass flow rates(0.65 mg·s-1and 0.95 mg·s-1).The experimental results indicated that the thruster has the most excellent performance in terms of thrust and efficiency etc at a channel length of 27 mm for identical operating conditions.In addition,particle in cell simulations,employed to reveal the underlying physical mechanisms,show that the ionization and acceleration zone is pushed downwards towards the channel exit as the anode moves towards the exit.At the identical operating point,when the channel length is reduced from 32 to 27 mm,the ionization and acceleration zone moves towards the exit,and the parameters such as thrust and efficiency increase due to the high ionization rate,ion number density,and axial electric field.When the channel length is further moved to 24 mm,the parameters in terms of thrust(F) and efficiency(ηa) are reduced as a result of the decreasing ionization efficiency(ηm) and the larger plume divergence angle(α).In this paper,the results indicated that an optimum anode position(ΔL=27 mm) exists for the optimum performance.展开更多
An automatic procedure for building a protein polyalanine backbone from guiding alpha-carbon positions is presented here,which is different from a previously developed'spare parts'approach(Jones and Thirup,198...An automatic procedure for building a protein polyalanine backbone from guiding alpha-carbon positions is presented here,which is different from a previously developed'spare parts'approach(Jones and Thirup,1986;Claessens et al.,1989). In our procedure,the geometric restraint of angle N-CA-C is used to generate a list of polypeptide chains,and several filters are used later to select the best conformer.The most important filter is based upon the Ramachandran scatter plot of mainchain dihedral angles PHI and PSI.Results for all test cases are satisfactory,with more than 95%of peptide planes correctly reconstructed and the overall root-mean-square deviation less than 0.5 angstrom compared with the refined X-ray coordinates.展开更多
Tricyclic compound 6 was synthesized form compound 1 through sis steps, thus preblem of the stereochemistry of C2α-H being solved. The stereochemistry for introducing hydroxy groups at C3β and C4α positions in com...Tricyclic compound 6 was synthesized form compound 1 through sis steps, thus preblem of the stereochemistry of C2α-H being solved. The stereochemistry for introducing hydroxy groups at C3β and C4α positions in compound 1 was also described.展开更多
[Objectives]This study was conducted to clarify the differences and abundance or deficiency of various elements in tobacco leaves from different positions of CB-1 in Zhangping City,so as to guide the production of pre...[Objectives]This study was conducted to clarify the differences and abundance or deficiency of various elements in tobacco leaves from different positions of CB-1 in Zhangping City,so as to guide the production of precision fertilization.[Methods]The element contents of CB-1 were determined by an X-ray fluorescence spectrometer.[Results]In terms of the contents of carbon,the upper leaves(45.73%)were significantly higher than the cutters(41.53%),and the lower leaves(43.15%)had no significant differences from both of them.For the content of oxygen element,there was no significant difference between the cutters(44.77%)and the lower leaves(43.40%),both of which were significantly higher than the upper leaves(40.75%).The contents of nitrogen,phosphorus,sulfur,boron and nickel all increased with the increase of the position,and they were significantly higher in the upper leaves than in the cutters and lower leaves.The contents of potassium,calcium,magnesium,chlorine and silicon all decreased with the increase of the position,and the lower leaves were significantly higher than the cutters and upper leaves.The contents of aluminum,titanium and chromium increased significantly with the increase of the position.The contents of strontium,zirconium and arsenic decreased significantly with the increase of the position.The element contents of tobacco leaves had significant or extremely significant differences between different parts of CB-1 in Zhangping City mostly.The contents of nitrogen,potassium,calcium,sulfur,chlorine,molybdenum and nickel in tobacco leaves were appropriate,and the contents of manganese and iron were too high,while the contents of phosphorus and copper were slightly low.The contents of magnesium,silicon,boron and sodium were too low.[Conclusions]This study can guide targeted fertilization and regulation of element contents in the tobacco leaves from different parts in production,and is of great significance to improving the production,quality and industrial availability of CB-1.展开更多
The loading-unloading-reloading process could affect the tensile deformation of metals with the combined function of stress relaxation and work hardening, which has been reported in multiple experiments. Nevertheless,...The loading-unloading-reloading process could affect the tensile deformation of metals with the combined function of stress relaxation and work hardening, which has been reported in multiple experiments. Nevertheless, the effects of different unloading positions and unloading times have not been investigated. In this study, unloading-reloading tests on three materials (AL6061, HSLA and Q195) were conducted. The stress exhibits a rapid rise momentarily upon reloading and stabilizes afterward while the post stress-strain curve deviates up or down from the monotonic tensile curve. The ductility is enhanced by the unloading-reloading process in general. Different unloading positions and unloading times have different degrees of influence on the stretching of these metals. The effect of loading conditions on a medium manganese steel was further studied. The functions to modify the post stress-strain relationship after unloading-reloading were established.展开更多
Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), one of the most important Laboratories on magnetically confined fusion in China and the Nuclear Fusion Research Center of the World Laboratory, is sear...Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), one of the most important Laboratories on magnetically confined fusion in China and the Nuclear Fusion Research Center of the World Laboratory, is searching for 5 senior and 10 junior scientists of plasma and fusion in the following superconducting tokamak research areas: theory and simulation, diverter and edge physics, plasma diagnostics, electron cyclotron resonant heating, ion cyclotron resonant heating, lower hybrid wave, neutral beam injection, reactor design, fusion material, superconducting engineering.展开更多
Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), one of the most important laboratories on magnetically confined fusion in China and the Nuclear Fusion Research Center of the World Laboratory, is sear...Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), one of the most important laboratories on magnetically confined fusion in China and the Nuclear Fusion Research Center of the World Laboratory, is searching for 5 senior and 10 junior scientists of plasma and fusion in the following superconducting tokamak research areas: theory and simulation, diverter and edge physics, plasma diagnostics, electron cyclotron resonant heating, ion cyclotron resonant heating, lower hybrid wave, neutral beam injection, reactor design, fusion material, superconducting engineering.展开更多
Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), one of the most important laboratories on magnetically confined fusion in China and the Nuclear Fusion Research Center of the World Laboratory, is sear...Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), one of the most important laboratories on magnetically confined fusion in China and the Nuclear Fusion Research Center of the World Laboratory, is searching for 5 senior and 10 junior scientists of plasma and fusion in the following superconducting tokamak research areas: theory and simulation, diverter and edge physics, plasma diagnostics, electron cyclotron resonant heating, ion cyclotron resonant heating, lower hybrid wave, neutral beam injection, reactor design, fusion material, superconducting engineering.展开更多
基金the Obstetrics and Gynecology Hospital of Fudan University for supporting this project。
文摘Objectives A systematic review and network meta-analysis was conducted to evaluate the effectiveness of different childbirth positions in reducing the duration of the second stage of labor,providing evidence-based insights for obstetric institutions to guide interventions related to childbirth positions.Methods A comprehensive literature search was conducted in databases,including PubMed,Web of Science,the Cochrane Library,Embase,Wanfang Databases,China National Knowledge Infrastructure Databases(CNKI),China Science and Technology Journal Database(CSTJ),and China Biology Medicine disc(CBMdisc)to identify studies on the effectiveness of different childbirth positions in reducing the duration of the second stage of labor.The search included randomized controlled trials published from database inception to September 30,2024.The Cochrane risk-of-bias tool was used to assess the quality of the studies.Two independent reviewers screened the literature,extracted data,and evaluated study quality.Subsequently,a network meta-analysis was performed using STATA software.The study protocol has been registered in PROSPERO(CRD42023428217).Results This study analyzed data from 25 randomized controlled trials involving 9,844 women.The findings indicated that in comparison to lithotomy position,free position(MD=20.53,95%CI[11.38,29.68])and upright position(MD=−24.13,95%CI[−42.94,-5.32])were found to be superior in reducing the duration of the second stage of labor.Free position outperformed kneeling position(MD=21.48,95%CI[4.67,38.28])and squatting position(MD=23.43,95%CI[1.88,44.97]);upright position was superior to kneeling position(MD=−25.08,95%CI[−46.93,−3.22]);semirecumbent position surpassed squatting position(MD=19.71,95%CI[2.05,37.38]);and upright position was also superior to squatting position(MD=−27.03,95%CI[−51.48,−2.57]).According to the surface under the cumulative ranking curve(SUCRA),the upright position emerged as the most effective for reducing the duration of the second stage of labor(87.4%),followed by free position(81.1%),semirecumbent position(70.0%),and lateral position(62.3%).Conclusion These findings offer valuable insights for midwifery practice and help inform future research directions.Considering the limitations of this review,more larger-scale,multicenter randomized controlled trials are warranted to further evaluate the relative effectiveness of different childbirth positions in reducing the duration of the second stage of labor.
基金financially supported by the National Natural Science Foundation of China(No.41901132)the Natural Scientific Project of Guangxi Zhuang Autonomous Region(Nos.2019GXNSFAA185015,2021GXNSFBA220025)+1 种基金the Interdisciplinary Scientific Research Foundation of Guangxi University(No.2022JCC026)the Project of Key Laboratory of Early Rapid Identification,Prevention and Control of Geological Diseases in Traffic Corridor of High Intensity Earthquake Mountainous Area of Yunnan Province(No.KLGDTC-2021-01)。
文摘Granite residual soil slope is often destroyed,which poses great threats to Rong County in southeastern Guangxi,China.Heavy rainfall and fissures are the major triggering and internal factors.The fissure that controls the slope stability and the associated failure mechanisms remain unclear.The purpose of this study was to identify the controlling fissures through field investigation,elucidate the effect of its position,and analyze the failure process and hydrological response of residual soil slope through artificial flume model tests.The results comprised five aspects.(1)Surface weathering and unloading fissures could affect slope stability.(2)The failure processes with different fissure positions exhibited inconsistent characteristics.(3)The volume moisture content(VMC)had the most direct response at the fissure tip.The corresponding infiltration rate was the highest.The response time of pore water pressure(PWP)was longer than that of VMC.Fluctuations in PWP were associated with VMC and changes in the soil microstructure due to local deformation.(4)Slope failure was accompanied by serious soil erosion.This could be attributed to the infiltration direction and the interaction between soil and water.(5)Fissured soil slopes experienced five similar failure processes:sheet erosion and partial failure of the slope foot,occurrence of preferential flow and enlargement of the sliding area,creep deformation and tension fissure emergence,block sliding and gully erosion,and flow-slip.
文摘This paper delves into the problem of optimal placement conditions for a group of agents collaboratively localizing a target using range-only or bearing-only measurements.The challenge in this study stems from the uncertainty associated with the positions of the agents,which may experience drift or disturbances during the target localization process.Initially,we derive the Cramer-Rao lower bound(CRLB)of the target position as the primary analytical metric.Subsequently,we establish the necessary and sufficient conditions for the optimal placement of agents.Based on these conditions,we analyze the maximal allowable agent position error for an expected mean squared error(MSE),providing valuable guidance for the selection of agent positioning sensors.The analytical findings are further validated through simulation experiments.
基金financially supported by the National Natural Science Foundation of China(Nos.22271116 and 22071079 for M.W)Jilin Provincial Science and Technology Department(No.20230101027JC for M.W.)the fellowship of China Postdoctoral Science Foundation(No.2021M701383 for J.S)。
文摘The stable coordinated metallo-complexes based on 2,2′:6′,2″-terpyridine(tpy)and its derivatives have been widely researched for various wide-ranging applications in photoelectronics,catalysis,sensor,photoluminescence,and so on.However,the most reported studies ignored the comprehensive comparison between structures modified by different positions and photoluminescence.Herein,we design a series of metallo-complexes which were assembled with tpy substituted triphenylamine(TPA)at different positions and metal ions and explored their photophysical properties.In the solution state,MLE_(2)based on the 5,5″-positions modification showed the highest PLQYs and PL intensity.With the increase of solvent polarity,MLB2exhibit the largest redshift.In the solid state,from MLA_(2)to MLE_(2),the emission colours are gradually red-shifted from yellow to red.The findings in this work may pave a new way to design functional metallo-complexes,not just for PL properties.
文摘Grey Wolf Optimization (GWO) is a nature-inspired metaheuristic algorithm that has gained popularity for solving optimization problems. In GWO, the success of the algorithm heavily relies on the efficient updating of the agents’ positions relative to the leader wolves. In this paper, we provide a brief overview of the Grey Wolf Optimization technique and its significance in solving complex optimization problems. Building upon the foundation of GWO, we introduce a novel technique for updating agents’ positions, which aims to enhance the algorithm’s effectiveness and efficiency. To evaluate the performance of our proposed approach, we conduct comprehensive experiments and compare the results with the original Grey Wolf Optimization technique. Our comparative analysis demonstrates that the proposed technique achieves superior optimization outcomes. These findings underscore the potential of our approach in addressing optimization challenges effectively and efficiently, making it a valuable contribution to the field of optimization algorithms.
基金The National Natural Science Foundation of China(No.50778094)
文摘The influence of the panel position on the cooling performance of a radiant panel is analyzed.The coupled simulation of convection and radiation is set up by a computational fluid dynamics（CFD）method.The simulations with different panel positions and different indoor heat sources are used to calculate the cooling capacity of the radiant panel and the indoor thermal environment.The simulation results are in good agreement with the experimental results.The results show that when the indoor heat source temperature is low,the convective heat flux is the main influence factor of the cooling capacity and the radiant panel should be placed on the wall or on the ceiling.Otherwise,when the indoor heat source temperature is high,the radiation heat flux is the main factor and the radiant panel should be placed as near to the heat sources as possible.
基金supported by the National Natural Science Foundation of China (31471444,31401327)the Special Fund for Agro-scientific Research in the Public Interest of China (Impact of Climate Change on Agriculture Production,201203096)the Jiangsu Overseas Research and Training Program for University Prominent Young and Middle-aged Teachers and President,China (2016)
文摘Cotton growth and development are determined and influenced by cultivars, meteorological conditions, and management practices. The objective of this study was to quantify the optimum of temperature-light meteorological factors for seedcotton biomass per boll with respect to boll positions. Field experiments were conducted using two cultivars of Kemian 1 and Sumian 15 with three planting dates of 25 April （mean daily temperature （MDT） was 28.0 and 25.4°C in 2010 and 2011, respectively）, 25 May （MDT was 22.5 and 21.2°C in 2010 and 2011, respectively）, and 10 Jun （MDT was 18.7 and 17.9°C in 2010 and 2011, respectively）, and under three shading levels （crop relative light rates （CRLR） were 100, 80, and 60％） during 2010 and 2011 cotton boll development period （from anthesis to boll open stages）. The main meteorological factors （temperature and light） affected seedcotton biomass per boll differently among different boll positions and cultivars. Mean daily radiation （MDR） affected seedcotton biomass per boll at all boll positions, except fruiting branch 2 （FB2） fruting node 1 （FN1）. However, its influence was less than temperature factors, especially growing degree-days （GDD）. Optimum mean daily maximum temperature （MDTmax） for seedcotton biomass per boll at FB11FN3 was 29.9-32.4°C, and the optimum MDR at aforementioned position was 15.8-17.5 MJ m-2. Definitely, these results can contribute to future cultural practices such as rational cultivars choice and distribution, simplifying field managements and mechanization to acquire more efficient and economical cotton management.
文摘This paper describes systematic measurement of fiber migration and distribution pattern of twist at different radial positions of rotor spun yarn mixed tracer fiber by Hi-Scope Video Microscope System. The positions of tracer fibers were measured in three dimensions accurately, and the migration index and the twist distribution at different radial positions of rotor yarn were calculated and analyzed. This research result serves to provide useful references for further study on the structural mechanics of rotor spun yarn.
基金supported by the Fundamental Research Funds for the Central Universities(ZYGX2009J016)
文摘The uncertainty of observers＇ positions can lead to significantly degrading in source localization accuracy. This pa-per proposes a method of using self-location for calibrating the positions of observer stations in source localization to reduce the errors of the observer positions and improve the accuracy of the source localization. The relative distance measurements of the two coordinative observers are used for the linear minimum mean square error （LMMSE） estimator. The results of computer si-mulations prove the feasibility and effectiveness of the proposed method. With the general estimation errors of observers＇ positions, the MSE of the source localization with self-location calibration, which is significantly lower than that without self-location calibra-tion, is approximating to the Cramer-Rao lower bound （CRLB）.
基金Project(BA2012049)supported by the Special Fund of Jiangsu Province for the Transformation of Scientific and Technological Achievements,China
文摘To obtain the stable temperature field required for growing sapphire crystals, the influence of relative positions between RF coil and crucible on the performances of sapphires produced by edge-defined film-fed growth（EFG） technique was investigated. For comparison, the crucible was located at the top（case A） and the middle（case B） of the RF coil, respectively. Furthermore, the lattice integrities were studied by the double-crystal X-ray diffraction, and the dislocations were observed under the optical microscope and atomic force microscope after corroding in molten KOH at 390 ℃. The crystals in case B exhibit better lattice integrity with smaller full width at half maximum of 29.13 rad·s, while the value in case A is 45.17 rad·s. The morphologies of dislocation etch pits in both cases show typical triangular symmetry with smooth surfaces. However, the dislocation density of 2.8×104 cm-2 in case B is only half of that in case A, and the distribution is more uniform, compared to the U-shaper in case A.
文摘Objective: To investigate the short-term efficacy of laparoscopic radical resection of right-sided colon cancer with two different surgeon positions and trocar placements. Methods: The data of 78 patients who underwent laparoscopic radical resection of right-sided colon cancer between January 2018 and August 2019 were retrospectively analysed. The surgical method was selected by the patients. The patients were divided into two groups according to the surgeons’ positioning habits and trocar placements. The group with the lead surgeon standing between the patient’s legs had 35 patients, and the group with the lead surgeon standing at the left side of the patient had 43 patients. The operation time, intraoperative blood loss, postoperative anal gas evacuation time, postoperative urinary catheter indwelling time, postoperative hospital stay, C-reactive protein (CRP) level on the first day after surgery, and postoperative pathological data and complications were compared between the two groups. Results: All patients underwent the laparoscopic radical resection of right-sided colon cancer, none converting to laparotomy. No significant difference (P > 0.05) in intraoperative blood loss (57.6 ± 21.3 ml vs 60.2 ± 35.3 ml), postoperative anal gas evacuation time (3.5 ± 1.1 d vs 3.8 ± 1.3 d), postoperative urinary catheter indwelling time (2.6 ± 1.3 d vs 2.4 ± 1.2 d), postoperative hospital stay (7.1 ± 1.8 d vs 7.5 ± 2.1 d), or CRP level on the first day after surgery (54.7 ± 9.6 mg/L vs 53.9 ± 8.2 mg/L) was detected between the two groups. The operation time was shorter in the group with the lead surgeon standing between the patient’s legs (185.2 ± 25.6 min vs 196.2 ±19.7 min) (P < 0.05). The two groups did not differ significantly in the tumour length (4.2 ± 1.3 cm vs 3.9 ± 1.5 cm), number of dissected lymph nodes (27.5 ± 11.6 vs 25.1 ± 15.4), pathological type, or postoperative pathological tumour-node-metastasis stage (P > 0.05). No patients died or had anastomotic fistula during their postoperative hospital stay, and the incidence of postoperative complications did not differ between the two groups (22.9% (8/35) vs 23.3% (10/42);P > 0.05). Conclusion: Under the principle of radical resection, the surgeon should adopt the most suitable standing position and trocar placement according to the specific situation. If the surgeon stands between the patient’s legs, this might shorten the operation time and promote a smoother surgery.
基金The project supported by the National Meg-Science Engineering Project of the Chinese Government
文摘The plasma shape and other paremeters such as /3P, li is important for the tokamak deveice where the plasma has a non-circular cross-section of sufficient elongation. The measuered signals of magnetic probes and flux loops are used to reconstruct the plasma shape and the current profile in device operation and plasma shape feed back control system. So the number and positions of magnetic probes and flux loops provides the basis of the plasma reconstruction. This paper instroduce how to use EFIT code (equilibrium fitting code) to determine the number and positions of the magnetic probes and flux loops. The simulation result is given also.
基金National Natural Science Foundation of China (No.12005087)Science and Technology Program of Gansu Province (Nos.2006ZCTF0054, HTKJ2019KL510003,and 20JR10RA478)。
文摘Low-power Hall thruster(LHT) generally has poor discharge efficiency characteristics due to the large surface-to-volume ratio.Aiming to further refine and improve the performance of 300 W class LHT in terms of thrust and efficiency,and to obtain the most optimal operating point,the experimental study of the discharge characteristics for three different anode positions was conducted under the operation of various discharge voltages(100-400 V) and anode mass flow rates(0.65 mg·s-1and 0.95 mg·s-1).The experimental results indicated that the thruster has the most excellent performance in terms of thrust and efficiency etc at a channel length of 27 mm for identical operating conditions.In addition,particle in cell simulations,employed to reveal the underlying physical mechanisms,show that the ionization and acceleration zone is pushed downwards towards the channel exit as the anode moves towards the exit.At the identical operating point,when the channel length is reduced from 32 to 27 mm,the ionization and acceleration zone moves towards the exit,and the parameters such as thrust and efficiency increase due to the high ionization rate,ion number density,and axial electric field.When the channel length is further moved to 24 mm,the parameters in terms of thrust(F) and efficiency(ηa) are reduced as a result of the decreasing ionization efficiency(ηm) and the larger plume divergence angle(α).In this paper,the results indicated that an optimum anode position(ΔL=27 mm) exists for the optimum performance.
文摘An automatic procedure for building a protein polyalanine backbone from guiding alpha-carbon positions is presented here,which is different from a previously developed'spare parts'approach(Jones and Thirup,1986;Claessens et al.,1989). In our procedure,the geometric restraint of angle N-CA-C is used to generate a list of polypeptide chains,and several filters are used later to select the best conformer.The most important filter is based upon the Ramachandran scatter plot of mainchain dihedral angles PHI and PSI.Results for all test cases are satisfactory,with more than 95%of peptide planes correctly reconstructed and the overall root-mean-square deviation less than 0.5 angstrom compared with the refined X-ray coordinates.
文摘Tricyclic compound 6 was synthesized form compound 1 through sis steps, thus preblem of the stereochemistry of C2α-H being solved. The stereochemistry for introducing hydroxy groups at C3β and C4α positions in compound 1 was also described.
基金Supported by Science and Technology Project of China Tobacco Hebei Industrial Co.Ltd.(2021130000300029).
文摘[Objectives]This study was conducted to clarify the differences and abundance or deficiency of various elements in tobacco leaves from different positions of CB-1 in Zhangping City,so as to guide the production of precision fertilization.[Methods]The element contents of CB-1 were determined by an X-ray fluorescence spectrometer.[Results]In terms of the contents of carbon,the upper leaves(45.73%)were significantly higher than the cutters(41.53%),and the lower leaves(43.15%)had no significant differences from both of them.For the content of oxygen element,there was no significant difference between the cutters(44.77%)and the lower leaves(43.40%),both of which were significantly higher than the upper leaves(40.75%).The contents of nitrogen,phosphorus,sulfur,boron and nickel all increased with the increase of the position,and they were significantly higher in the upper leaves than in the cutters and lower leaves.The contents of potassium,calcium,magnesium,chlorine and silicon all decreased with the increase of the position,and the lower leaves were significantly higher than the cutters and upper leaves.The contents of aluminum,titanium and chromium increased significantly with the increase of the position.The contents of strontium,zirconium and arsenic decreased significantly with the increase of the position.The element contents of tobacco leaves had significant or extremely significant differences between different parts of CB-1 in Zhangping City mostly.The contents of nitrogen,potassium,calcium,sulfur,chlorine,molybdenum and nickel in tobacco leaves were appropriate,and the contents of manganese and iron were too high,while the contents of phosphorus and copper were slightly low.The contents of magnesium,silicon,boron and sodium were too low.[Conclusions]This study can guide targeted fertilization and regulation of element contents in the tobacco leaves from different parts in production,and is of great significance to improving the production,quality and industrial availability of CB-1.
文摘The loading-unloading-reloading process could affect the tensile deformation of metals with the combined function of stress relaxation and work hardening, which has been reported in multiple experiments. Nevertheless, the effects of different unloading positions and unloading times have not been investigated. In this study, unloading-reloading tests on three materials (AL6061, HSLA and Q195) were conducted. The stress exhibits a rapid rise momentarily upon reloading and stabilizes afterward while the post stress-strain curve deviates up or down from the monotonic tensile curve. The ductility is enhanced by the unloading-reloading process in general. Different unloading positions and unloading times have different degrees of influence on the stretching of these metals. The effect of loading conditions on a medium manganese steel was further studied. The functions to modify the post stress-strain relationship after unloading-reloading were established.
文摘Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), one of the most important Laboratories on magnetically confined fusion in China and the Nuclear Fusion Research Center of the World Laboratory, is searching for 5 senior and 10 junior scientists of plasma and fusion in the following superconducting tokamak research areas: theory and simulation, diverter and edge physics, plasma diagnostics, electron cyclotron resonant heating, ion cyclotron resonant heating, lower hybrid wave, neutral beam injection, reactor design, fusion material, superconducting engineering.
文摘Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), one of the most important laboratories on magnetically confined fusion in China and the Nuclear Fusion Research Center of the World Laboratory, is searching for 5 senior and 10 junior scientists of plasma and fusion in the following superconducting tokamak research areas: theory and simulation, diverter and edge physics, plasma diagnostics, electron cyclotron resonant heating, ion cyclotron resonant heating, lower hybrid wave, neutral beam injection, reactor design, fusion material, superconducting engineering.
文摘Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP), one of the most important laboratories on magnetically confined fusion in China and the Nuclear Fusion Research Center of the World Laboratory, is searching for 5 senior and 10 junior scientists of plasma and fusion in the following superconducting tokamak research areas: theory and simulation, diverter and edge physics, plasma diagnostics, electron cyclotron resonant heating, ion cyclotron resonant heating, lower hybrid wave, neutral beam injection, reactor design, fusion material, superconducting engineering.
