Polyacrylonitrile (PAN) precursor is a core precursor for the preparation of high-performance carbon fibers. Its unique chemical structure and physical properties directly contributes to the microstructure and mechani...Polyacrylonitrile (PAN) precursor is a core precursor for the preparation of high-performance carbon fibers. Its unique chemical structure and physical properties directly contributes to the microstructure and mechanical properties of carbon fibers, and therefore affect the overall performance of pultruded composites. This study systematically investigated the influence of PAN precursor properties on the degree of graphitization, surface morphology and mechanical properties of carbon fibers by regulating the molecular weight distribution, stretching ratio and impurity content of PAN precursor, and analyzed the mechanism of action of carbon fiber properties on the interfacial bonding strength and tensile/ bending properties of composites in combination with the pultrusion process. The results showed that when the filament stretchability was increased to 4.5 times, the axial orientation of carbon fibers increased by 18% and the tensile strength reached 520 MPa;Filaments with impurity content below 0.3% increase carbon fiber yield by 5.2% and interlaminar shear strength of composites by 23%. This study provides a theoretical basis for raw material screening and process optimization of high-performance carbon fibers and their composites.展开更多
Solar steam generation(SSG)offers a cost-effective solution for producing clean water by utilizing solar energy.However,integrating effective thermal management and water transportation to develop high-efficiency sola...Solar steam generation(SSG)offers a cost-effective solution for producing clean water by utilizing solar energy.However,integrating effective thermal management and water transportation to develop high-efficiency solar evaporators remains a significant challenge.Here,inspired by the hierarchical structure of the stem of bird of paradise,a three-dimensional multiscale liquid metal/polyacrylonitrile(LM/PAN)evaporator is fabricated by assembling LM/PAN fibers.The strong localized surface plasmon resonance of LM particles and porous structure of LM/PAN fibers with interconnected channels lead to efficient light absorption up to 90.9%.Consequently,the multiscale biomimetic LM/PAN evaporator achieves an outstanding water evaporation rate of 2.66 kg m^(-2)h^(-1)with a solar energy efficiency of 96.5%under one sun irradiation and an exceptional water rate of 2.58 kg m^(-2)h^(-1)in brine.Additionally,the LM/PAN evaporator demonstrates a superior purification performance for seawater,with the concentration of Na^(+),Mg^(2+),K^(+)and Ca^(2+)in real seawater dramatically decreased by three orders to less than 7 mg L^(-1) after desalination under light irradiation.The multiscale LM/PAN evaporator with hierarchical structure regulates the water transportation as well as thermal management for highly effective solar-driven evaporation,providing valuable insight into the structural design principles for advanced SSG systems.展开更多
High-performance lithium-ion batteries and sodium-ion batteries have been developed utilizing a hybrid anode material composed of zinc sulfide/sulfurized polyacrylonitrile.The in situ-generated zinc sulfide nanopartic...High-performance lithium-ion batteries and sodium-ion batteries have been developed utilizing a hybrid anode material composed of zinc sulfide/sulfurized polyacrylonitrile.The in situ-generated zinc sulfide nanoparticles serve as catalytic agents,significantly enhancing conductivity,shortening diffusion paths,and accelerating reaction kinetics.Simultaneously,the sulfurized polyacrylonitrile fibers form a three-dimensional matrix that not only provides a continuous network for rapid electron transfer but also prevents zinc sulfide nanoparticle aggregation and mitigates volume changes during charge-discharge cycles.Moreover,the heterointerface structure at the junction of zinc sulfide nanoparticles and the sulfurized polyacrylonitrile matrix increases the availability of active sites and facilitates both ion adsorption and electron transfer.As an anode material for lithium-ion batteries,the zinc sulfide/sulfurized polyacrylonitrile hybrid demonstrates a high reversible capacity of 1178 mAh g^(-1)after 100 cycles at a current density of 0.2 A g^(-1),maintaining a capacity of 788 mAh g^(-1)after 200 cycles at 1 A g^(-1).It also exhibits excellent sodium storage capabilities,retaining a capacity of 625 mAh g^(-1)after 150 cycles at 0.2 A g^(-1).Furthermore,ex-situ X-ray photoelectron spectroscopy,X-ray diffraction,7Li solid-state magic angle spinning nuclear magnetic resonance,and in situ Raman are employed to investigate the reaction mechanisms of the zinc sulfide/sulfurized polyacrylonitrile hybrid anode,providing valuable insights that pave the way for the advancement of hybrid anode materials in lithium-ion batteries and sodium-ion batteries.展开更多
The flexible conductive nanofiber membrane is widely used in the field of wearable electronics.High tensile properties of electrospun nanofiber membranes are essential for their successful commercial application.With ...The flexible conductive nanofiber membrane is widely used in the field of wearable electronics.High tensile properties of electrospun nanofiber membranes are essential for their successful commercial application.With cellulose nanocrystal(CNC)as the reinforcement,the flexible conductive polyacrylonitrile(PAN)/CNC@carbon nanotube(CNT)nanofiber membrane is electrospun from the PAN solution containing suspended CNC and impregnated with the CNT solution.The structure and properties of nanofiber membranes are studied.The results show that with the increase of the PAN mass fraction,the viscosity of the electrospinning solution increases,leading to an increase in the nanofiber diameter.When the mass fraction of PAN is 12%,PAN/CNC nanofiber membranes at different CNC mass fractions are successfully prepared.The structure and properties of PAN/CNC nanofiber membranes are affected by the addition of CNC.As the CNC mass fraction increases,the nanofibers become thicker,the nanofiber diameter distribution widens,and the tensile strength first increases and then decreases.When the mass ratio of PAN to CNC is 4∶1,the tensile strength of the PAN/CNC nanofiber membrane is the highest,and it is higher than that of the PAN nanofiber membrane.After impregnating the PAN/CNC nanofiber membrane with CNTs,the tensile strength of the nanofiber membrane increases to 3.12 MPa and the surface resistivity is 64Ω/cm^(2).The flexible conductive nanofiber membranes would be used in energy storage and sensing fields,and the study might provide a strong base for their future development.展开更多
Polyacrylonitrile preoxided fibre PANOF is an intermediate in carbon fibre preparation. Thequality of PANOF is closely related to the property and structure of carbon fibre. In this paper, thermal mechanical analysis(...Polyacrylonitrile preoxided fibre PANOF is an intermediate in carbon fibre preparation. Thequality of PANOF is closely related to the property and structure of carbon fibre. In this paper, thermal mechanical analysis(TMA), thermogravimetric analysis(TGA), swell-ing differential scanning calorimetry(SDSC)and X-ray photoelectron spectroscopy(XPS)wereused to study the increase in tenacity of PANOF from the precursor treated with cuprous salt It has been discovered that the cuprous salt reacts strongly with the uncyclized CN of PANOF,resulting in an increase in the tenacity of PANOF by 30%. The results shwo that the cause of thistenacity improvement is the formation of coordinated complex. Cu^+is the central ion, and PANOFthe ligand. It is due to the coordinate bond that the network structure is formed from uncyclizedCN of PANOF. Therefore the tenacity of PANOF is remarkably increased.展开更多
In this work, the polyacrylonitrile containing gadolinium nanofibers for thermal neutron protection were successfully fabricated by electrospunning and followed by in situ self-polymerization. Scanning electron micros...In this work, the polyacrylonitrile containing gadolinium nanofibers for thermal neutron protection were successfully fabricated by electrospunning and followed by in situ self-polymerization. Scanning electron microscopy(SEM) and energy-dispersive spectroscopy(EDS) results show that there are no beads on the smooth surface of the nanofibers and gadolinium elements are uniformly dispersed in the matrix. The thermal analysis and FTIR results prove that gadolinium methacrylate is induced in situ selfpolymerization during the heat treatment. The leaching rate of Gd^(3+) decreases from 79.97% to 10.74% tested by lowfield nuclear magnetic resonance(LF-NMR) method after the self-polymerization of gadolinium methacrylate in the matrix when the nanofibers were immersed in water for7 days. The thermal neutron shielding analysis calculated by MCNP program shows that above 99% thermal neutrons are absorbed when traveling through the 2-mm-thick polyacrylonitrile containing gadolinium nanofibers.展开更多
Orientation of copolymer polyacrylonitrile （PAN） chains during their deformation prior to stabilization and the further effect on the stabilization were investigated in detail. Results reveal that the orientation of...Orientation of copolymer polyacrylonitrile （PAN） chains during their deformation prior to stabilization and the further effect on the stabilization were investigated in detail. Results reveal that the orientation of PAN chains presents a saturation point of 69.51% when the deformation ratio reaches approximately 1.07, meanwhile the cyclization rather than the oxidation has a stronger dependence on the orientation of PAN chains during stabilization. The cyclization is facilitated that the cyclization degree is increasing while the activation energy is decreasing obviously as a consequence of the developing orientation of PAN fibers before the saturation point; however, it is restrained during the further deformation of PAN fibers after the point. The resulting carbon fibers obtained from the PAN fibers prepared at the saturation point possess the highest mechanical properties of 4.07 GPa in tensile strength and 249.0 GPa in tensile modulus.展开更多
The acoustical damping property of electrospun polyacrylonitrile （PAN） nanofibrous membranes with different thicknesses and porosities was investigated. The sound absorption coefficients were measured using the impe...The acoustical damping property of electrospun polyacrylonitrile （PAN） nanofibrous membranes with different thicknesses and porosities was investigated. The sound absorption coefficients were measured using the impedance tube instrument based on ISO10534-2：1998（E）. Results indicate that the first resonance absorption frequency of nanofibrous membranes shifts to the lower frequency with the increase of the back cavity or the thickness of membranes. Moreover, the sound absorption performance of the perforated pane/ can be greatly improved by combination with a thin layer of PAN nanofibrous membrane. Traditional acoustical damping materials （foam, fiber） coated with nanofibrous membranes have better acoustical performance in the low and medium frequency range than that of acoustical materials alone. All of the results demonstrate the PAN nanofibrous membrane is a suitable candidate for noise reduction.展开更多
This paper describes the preparation of a membrane of polyacrylonitrile(PAN)and its corresponding membrane coated with polyaniline(PANI)for the adsorption of heavy metal ions.Scanning electron microscopy micrographs r...This paper describes the preparation of a membrane of polyacrylonitrile(PAN)and its corresponding membrane coated with polyaniline(PANI)for the adsorption of heavy metal ions.Scanning electron microscopy micrographs revealed that all the membranes exhibited nanofibrous morphology.The prepared membranes were characterized by Fourier transform infrared spectroscopy(FTIR).The prepared membranes were used as an adsorbent for hazardous heavy metal ions Pb^(2+) and Cr_(2)O^(2-)_(7).The adsorption capacity and the removal efficiency of the membranes were examined as function of the initial adsorbate concentration and pH of the medium.Coated membranes with PANI showed better adsorption performance and their direct current(DC)conductivities were correlated to heavy metal ion concentrations.Adsorption isotherms were also performed,and the adsorption process was tested according to the Langmuir and Freundlich models.The regeneration and reuse of the prepared membranes to re-adsorb heavy metal ions were also investigated.The enhancement in adsorption performance and reusability of PANI-coated membranes in comparison with non-coated ones is fully discussed.The results show that the maximum adsorption capacities of lead and chromate ions on the PANI-coated membranes are 290.12 and 1202.53 mg/g,respectively.展开更多
The amidoximated polyacrylonitrile （PAN） fiber Fe complexeswere prepared and used as the heterogeneous Fenton catalysts for thedegradation of28 anionicwater soluble azodyes inwater under visible irradiation. The mul...The amidoximated polyacrylonitrile （PAN） fiber Fe complexeswere prepared and used as the heterogeneous Fenton catalysts for thedegradation of28 anionicwater soluble azodyes inwater under visible irradiation. The multiple linear regression （MLR） methodwas employed todevelop the quantitative structure property relationship （QSPR） model equations for thedecoloration and mineralization of azodyes. Moreover, the predictive ability of the QSPR model equationswas assessed using Leave-one-out （LOO） and cross-validation （CV） methods. Additionally, the effect of Fe content of catalyst and the sodium chloride inwater on QSPR model equationswere also investigated. The results indicated that the heterogeneous photo-Fentondegradation of the azodyeswithdifferent structureswas conducted in the presence of the amidoximated PAN fiber Fe complex. The QSPR model equations for thedyedecoloration and mineralizationwere successfullydeveloped using MLR technique. MW/S （molecularweightdivided by the number of sulphonate groups） and N N=N （the number of azo linkage） are considered as the most importantdetermining factor for thedyedegradation and mineralization, and there is a significant negative correlation between MW/S or N N=N anddegradation percentage or total organic carbon （TOC） removal. Moreover, LOO and CV analysis suggested that the obtained QSPR model equations have the better prediction ability. The variation in Fe content of catalyst and the addition of sodium chloridedid not alter the nature of the QSPR model equations.展开更多
A cheap and simple sample preparation method, consisting of a dispersive solid-phase method and an adsorbent, activated carbon decorated PAN nanofibers, was employed and used for the extraction of antibiotics(ciproflo...A cheap and simple sample preparation method, consisting of a dispersive solid-phase method and an adsorbent, activated carbon decorated PAN nanofibers, was employed and used for the extraction of antibiotics(ciprofloxacin, danofloxacin, and enrofloxacin) in wastewater. Electrospun PAN nanofibers that were decorated with activated carbon produced from waste tires were used as the solid phase and the antibiotics analyzed by using high-performance liquid chromatography. Parameters such as pH, mass of adsorbent(MA),extraction volume(EV), and extraction time(ET) were optimized owing to their potential effect on the extraction of antibiotics from water. The recovery of all antibiotics was satisfactory, in the range of 90%–99%.The limits of detection and quantification were 0.05, 0.11, 0.20, and 0.53, 1.21, 2.17 mg/L, respectively. The precision was determined from the repeatability and reproducibility and expressed as the intra-day(n=20)and inter-day(n=5) precision. The intra-day and inter-day precision was reported in terms of the percentage relative standard deviation, which was 3% and 4%, respectively. The adsorption capacity of the activated carbon-decorated PAN nanofibers was satisfactory, and the reusability of the adsorbent was impressive when reused ten times. The accuracy of the dispersive solid phase extraction(DSPE) was validated by spike recovery tests; the results proved the reliability and efficiency of adsorbing antibiotics from wastewater. Finally, the proposed method was applied to wastewater samples collected from a wastewater treatment plant, which included influent, secondary, and effluent wastewater.展开更多
A novel carbon fiber pretreatment was proposed.Polyacrylonitrile(PAN)-based carbon fibers were first anodized in H3PO4 electrolyte to achieve an active surface,and then coated with Mo-B catalysts by immersed the carbo...A novel carbon fiber pretreatment was proposed.Polyacrylonitrile(PAN)-based carbon fibers were first anodized in H3PO4 electrolyte to achieve an active surface,and then coated with Mo-B catalysts by immersed the carbon fibers in a uniformly dispersed Mo-B sol.The as-treated carbon fibers were then graphitized at 2 400 ℃ for 2 h.The structural changes were characterized by X-ray diffractometry(XRD),Raman spectroscopy,scanning electron microscopy(SEM) and high-resolution transmission electronic microscopy(HRTEM).The results show that much better graphitization can be achieved in the presence of Mo-B,with an interlayer spacing(d002) of 0.335 8 nm and a crystalline size(Lc) of 28 nm.展开更多
In this report, nitrogen-doped porous carbons were synthesized from polyacrylonitrile fiber by a facile two-step synthesis process i.e. carbonization followed by KOH activation. Activation temperature and KOH/carbon r...In this report, nitrogen-doped porous carbons were synthesized from polyacrylonitrile fiber by a facile two-step synthesis process i.e. carbonization followed by KOH activation. Activation temperature and KOH/carbon ratio are two parameters to tune the porosity and surface chemical properties of sorbents. The as-obtained sorbents were carefully characterized.Special attention was paid concerning the change of sorbents’ morphology with respect to synthesis conditions. Under the activation temperatures of this study, the sorbents can still retain their fibrous structure when the KOH/carbon mass ratio is 1. Further increasing the KOH amount will destroy the original morphology of polyacrylonitrile fiber. CO_(2)adsorption performance tests show that a sorbent retaining the fibrous shape possesses the highest CO_(2)uptake of 3.95 mmol/g at 25℃and 1 bar. Comprehensive investigation found that the mutual effect of narrow microporosity and doped N content govern the CO_(2)adsorption capacity of these adsorbents. Furthermore, these polyacrylonitrile fiber-derived carbons present multiple outstanding CO_(2)capture properties such as excellent recyclability, high CO_(2)/N_(2)selectivity, fast adsorption kinetics, suitable heat of adsorption, and good dynamic adsorption capacity. Hence, nitrogen-doped porous carbons with fibrous structure are promising in CO_(2)capture.展开更多
In this study, biologically inspired silk fibroin grafted polyacrylonitrile(SF-g-PAN) filtration membrane was prepared using ZnCl_2 aqueous solution as solvent, avoiding the use of organic solvents. Phase inversion oc...In this study, biologically inspired silk fibroin grafted polyacrylonitrile(SF-g-PAN) filtration membrane was prepared using ZnCl_2 aqueous solution as solvent, avoiding the use of organic solvents. Phase inversion occurred when Zn^(2+)and Cl-ions gradually diffused into water, creating a well-connected ion channel network and the SF-g-PAN filtration membrane was obtained. The membranes were observed by SEM and 3D ultra-depth microscope. The hydrophilic property, pore size distribution and dye rejection of the membrane were investigated. Results showed that the membrane has no finger hole formation because ZnCl_2 aqueous solution has a lower curing rate parameter compared with organic solvents. SF-gPAN membrane possessed good anti-fouling properties and pH sensitivity. The pore size distribution of the SF-g-PAN membrane was 0.25–1.04 nm. The rejection of direct yellow 27(Mw = 662.6) and amaranth(Mw = 604.5) was 96.51% and 30.63%, with the flux of 72.32 L m^(-2) h^(-1) and 73.83 L m^(-2) h^(-1) respectively at0.1 MPa. The SF-g-PAN membrane has a wide range of applications prospect in fine separation, dye desalination, waste water treatment and biomedical fields.展开更多
Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage mol...Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.展开更多
Eu^(3+) ions were grafted onto the surface of electrospun polyacrylonitrile(PAN)nanofibers through coordination effect between C≡N groups on PAN nanofibers and Eu^(3+) ions,and benzoic acid(BA)was introduced as an as...Eu^(3+) ions were grafted onto the surface of electrospun polyacrylonitrile(PAN)nanofibers through coordination effect between C≡N groups on PAN nanofibers and Eu^(3+) ions,and benzoic acid(BA)was introduced as an assistant ligand.The impacts of concentrations of Eu^(3+) ions and BA,and reaction time on the properties of final products were investigated.The results reveal that Eu^(3+) ions can be successfully grafted onto PAN nanofibers,but the fluorescence intensity of the obtained PAN@Eu^(3+) nanofibers is very weak.After BA is introduced as the assistant ligand,the fluorescence intensity of the obtained PAN@(Eu^(3+)/BA)nanofibers is greatly stronger than that of PAN@Eu^(3+)nanofibers,and meanwhile,concentration quenching effect of Eu^(3+) ions can be effectively restrained.Furthermore,the superior structure of PAN@(Eu^(3+)/BA)nanofibers not only brings the effective utilization of precious elemental europium,but also guarantees high mechanical strength.展开更多
Sulfurized polyacrylonitrile(SPAN)represents a unique class of cathode material for lithium sulfur(Li-S)batteries as it eradicates the polysulfides shuttling issue in carbonate-based electrolyte.However,due to the ess...Sulfurized polyacrylonitrile(SPAN)represents a unique class of cathode material for lithium sulfur(Li-S)batteries as it eradicates the polysulfides shuttling issue in carbonate-based electrolyte.However,due to the essential chemical S-linking and organic nature of SPAN,the active mass percentage and rate capability are two bottleneck issues preventing its ultimate deployment outside of laboratories.In the current work,aiming to endow both the charge conductivity and catalytic activity to SPAN for maximizing the redox kinetics of S conversion,a freestanding nanofibrous SPAN cathode embedding conductive CNTs and atomically dispersed Co centers is fabricated via multivariate electrospinning.While the CNTs enable dramatically enhancing the fiber conductivity and generating mesoscopic porosity for facilitating charge and mass transportation,the cross-linking of SPAN by Co-N_(4) S motifs creates extra charge conduction pathways and further serves as the catalytic active sites for expediting redox S conversion.As a result,an extraordinary Li-SPAN performance is achieved with a high specific capacity up to 1856 mAh g^(-1)@0.2 C,a superb rate capability up to 10 C,and an ultra-long battery life up to 1500 cycles@1 C.Consequently,our study here provides insights into the adoption of coordination chemistry to maximize the sulfur utilization by ensuring a more complete redox conversion from SPAN to Li2 S,and vice versa.展开更多
High-performance carbon nanofibers are highly dependent on the performance of their precursors,especially polyacrylonitrile(PAN).In this work,the copolymer of PAN(coPAN)was synthesized for electrospinning.A self-assem...High-performance carbon nanofibers are highly dependent on the performance of their precursors,especially polyacrylonitrile(PAN).In this work,the copolymer of PAN(coPAN)was synthesized for electrospinning.A self-assembling set-up was used for the stretching of single coPAN nanofibers.FTIR and Raman spectroscopies were used to characterize the chemical structure of coPAN nanofibers.Scanning electron microscopy(SEM)and atomic force microscopy(AFM)were used to monitor the morphology of single coPAN nanofibers under different drawing times.Micro-tensile test was used to determine the mechanical properties of single coPAN nanofibers.The results indicated that the drawing led to an increase in degree of molecular orientation along the fiber axis from 0.656 to 0.808,tensile strength from 304 MPa to 595 MPa,and modulus from 3.1 GPa to 12.4 GPa.This research would provide fundamental information of high-performance electrospun coPAN nanofibers and offer opportunities for the preparation of high-performance carbon nanofibers.展开更多
A new A-B-A type of block copolymers,polyacrylonitrile-block-polydimethylsiloxane-block-polyacrylonitrile（PAN-b-PDMSb-PAN）,which comprises two polymer blocks of different polarities and compatibilities,were synthesi...A new A-B-A type of block copolymers,polyacrylonitrile-block-polydimethylsiloxane-block-polyacrylonitrile（PAN-b-PDMSb-PAN）,which comprises two polymer blocks of different polarities and compatibilities,were synthesized for the first time via reversible addition-fragmentation chain transfer polymerization.Reaction kinetics was investigated.PAN-b-PDMS-b-PAN films were prepared by spin-coating on glass chips.Significant order on the film surface morphologies was observed.展开更多
Sulfurized polyacrylonitrile(SPAN)as a promising cathode material for lithium sulfur(Li-S)batteries has drawn increasing attention for its improved electrochemical performance in carbonate-based electrolyte.However,th...Sulfurized polyacrylonitrile(SPAN)as a promising cathode material for lithium sulfur(Li-S)batteries has drawn increasing attention for its improved electrochemical performance in carbonate-based electrolyte.However,the relatively poor electronic and ionic conductivities of SPAN limit its high-rate and lowtemperature performances.In this work,a novel one-dimensional nanofiber SPAN(SFPAN)composite is developed as the cathode material for Li-S batteries.Benefitting from its one-dimensional nanostructure,the SFPAN composite cathode provides fast channels for the migration of ions and electronics,thus effectively improving its electrochemical performance at high rates and low temperature.As a result,the SFPAN maintains a high reversible specific capacity^1200 mAh g−1 after 400 cycles at 0.3 A g−1 and can deliver a high capacity of^850 mAh g−1 even at a high current density of 12.5 A g−1.What is more,the SFPAN can achieve a capacity of^800 mAh g−1 at 0℃and^1550 mAh g−1 at 60℃,thus providing a wider temperature range of applications.This work provides new perspectives on the cathode design for high-rate lithium-sulfur batteries.展开更多
文摘Polyacrylonitrile (PAN) precursor is a core precursor for the preparation of high-performance carbon fibers. Its unique chemical structure and physical properties directly contributes to the microstructure and mechanical properties of carbon fibers, and therefore affect the overall performance of pultruded composites. This study systematically investigated the influence of PAN precursor properties on the degree of graphitization, surface morphology and mechanical properties of carbon fibers by regulating the molecular weight distribution, stretching ratio and impurity content of PAN precursor, and analyzed the mechanism of action of carbon fiber properties on the interfacial bonding strength and tensile/ bending properties of composites in combination with the pultrusion process. The results showed that when the filament stretchability was increased to 4.5 times, the axial orientation of carbon fibers increased by 18% and the tensile strength reached 520 MPa;Filaments with impurity content below 0.3% increase carbon fiber yield by 5.2% and interlaminar shear strength of composites by 23%. This study provides a theoretical basis for raw material screening and process optimization of high-performance carbon fibers and their composites.
基金supported by the National Natural Science Foundation of China(52372096,52102368,22205189,52203103)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(2017ZT07C291)+4 种基金the Shenzhen Science and Technology Program(JCYJ20230807114205011 and KQTD20170810141424366)the Guang Dong Basic and Applied Basic Research Foundation(2024A1515011953,2022A1515011010 and 2021A1515110350)the Regional Joint Fund for Basic Research and Applied Basic Research of Guangdong Province(No.2020SA001515110905)the Shenzhen Natural Science Foundation(GXWD20201231105722002-20200824163747001)the 2023 SZSTI stable support scheme.
文摘Solar steam generation(SSG)offers a cost-effective solution for producing clean water by utilizing solar energy.However,integrating effective thermal management and water transportation to develop high-efficiency solar evaporators remains a significant challenge.Here,inspired by the hierarchical structure of the stem of bird of paradise,a three-dimensional multiscale liquid metal/polyacrylonitrile(LM/PAN)evaporator is fabricated by assembling LM/PAN fibers.The strong localized surface plasmon resonance of LM particles and porous structure of LM/PAN fibers with interconnected channels lead to efficient light absorption up to 90.9%.Consequently,the multiscale biomimetic LM/PAN evaporator achieves an outstanding water evaporation rate of 2.66 kg m^(-2)h^(-1)with a solar energy efficiency of 96.5%under one sun irradiation and an exceptional water rate of 2.58 kg m^(-2)h^(-1)in brine.Additionally,the LM/PAN evaporator demonstrates a superior purification performance for seawater,with the concentration of Na^(+),Mg^(2+),K^(+)and Ca^(2+)in real seawater dramatically decreased by three orders to less than 7 mg L^(-1) after desalination under light irradiation.The multiscale LM/PAN evaporator with hierarchical structure regulates the water transportation as well as thermal management for highly effective solar-driven evaporation,providing valuable insight into the structural design principles for advanced SSG systems.
基金supported by“regional innovation mega project”program through the Korea Innovation Foundation funded by Ministry of Science and ICT(Project Number:2023-DD-UP-0026)the Energy Technology Evaluation and Planning(KETEP)and the Ministry of Trade,Industry&Energy(MOTIE)(No.RS-2024-00509401,RS-2023-00217581)“Regional Innovation Strategy(RIS)”through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(MOE)(2021RIS-001).
文摘High-performance lithium-ion batteries and sodium-ion batteries have been developed utilizing a hybrid anode material composed of zinc sulfide/sulfurized polyacrylonitrile.The in situ-generated zinc sulfide nanoparticles serve as catalytic agents,significantly enhancing conductivity,shortening diffusion paths,and accelerating reaction kinetics.Simultaneously,the sulfurized polyacrylonitrile fibers form a three-dimensional matrix that not only provides a continuous network for rapid electron transfer but also prevents zinc sulfide nanoparticle aggregation and mitigates volume changes during charge-discharge cycles.Moreover,the heterointerface structure at the junction of zinc sulfide nanoparticles and the sulfurized polyacrylonitrile matrix increases the availability of active sites and facilitates both ion adsorption and electron transfer.As an anode material for lithium-ion batteries,the zinc sulfide/sulfurized polyacrylonitrile hybrid demonstrates a high reversible capacity of 1178 mAh g^(-1)after 100 cycles at a current density of 0.2 A g^(-1),maintaining a capacity of 788 mAh g^(-1)after 200 cycles at 1 A g^(-1).It also exhibits excellent sodium storage capabilities,retaining a capacity of 625 mAh g^(-1)after 150 cycles at 0.2 A g^(-1).Furthermore,ex-situ X-ray photoelectron spectroscopy,X-ray diffraction,7Li solid-state magic angle spinning nuclear magnetic resonance,and in situ Raman are employed to investigate the reaction mechanisms of the zinc sulfide/sulfurized polyacrylonitrile hybrid anode,providing valuable insights that pave the way for the advancement of hybrid anode materials in lithium-ion batteries and sodium-ion batteries.
基金Beijing Municipal Education Commission,China(Nos.KM202210012009 and 202410012002)National Natural Science Foundation of China(No.52202015)+1 种基金Project of Constructing the Emerging Interdisciplinary Platform Based on“Clothing Science”of Beijing Institute of Fashion Technology,China(No.11000024T000003073871)XXX Key Laboratory of China(No.HTKJ2024KL703002)。
文摘The flexible conductive nanofiber membrane is widely used in the field of wearable electronics.High tensile properties of electrospun nanofiber membranes are essential for their successful commercial application.With cellulose nanocrystal(CNC)as the reinforcement,the flexible conductive polyacrylonitrile(PAN)/CNC@carbon nanotube(CNT)nanofiber membrane is electrospun from the PAN solution containing suspended CNC and impregnated with the CNT solution.The structure and properties of nanofiber membranes are studied.The results show that with the increase of the PAN mass fraction,the viscosity of the electrospinning solution increases,leading to an increase in the nanofiber diameter.When the mass fraction of PAN is 12%,PAN/CNC nanofiber membranes at different CNC mass fractions are successfully prepared.The structure and properties of PAN/CNC nanofiber membranes are affected by the addition of CNC.As the CNC mass fraction increases,the nanofibers become thicker,the nanofiber diameter distribution widens,and the tensile strength first increases and then decreases.When the mass ratio of PAN to CNC is 4∶1,the tensile strength of the PAN/CNC nanofiber membrane is the highest,and it is higher than that of the PAN nanofiber membrane.After impregnating the PAN/CNC nanofiber membrane with CNTs,the tensile strength of the nanofiber membrane increases to 3.12 MPa and the surface resistivity is 64Ω/cm^(2).The flexible conductive nanofiber membranes would be used in energy storage and sensing fields,and the study might provide a strong base for their future development.
文摘Polyacrylonitrile preoxided fibre PANOF is an intermediate in carbon fibre preparation. Thequality of PANOF is closely related to the property and structure of carbon fibre. In this paper, thermal mechanical analysis(TMA), thermogravimetric analysis(TGA), swell-ing differential scanning calorimetry(SDSC)and X-ray photoelectron spectroscopy(XPS)wereused to study the increase in tenacity of PANOF from the precursor treated with cuprous salt It has been discovered that the cuprous salt reacts strongly with the uncyclized CN of PANOF,resulting in an increase in the tenacity of PANOF by 30%. The results shwo that the cause of thistenacity improvement is the formation of coordinated complex. Cu^+is the central ion, and PANOFthe ligand. It is due to the coordinate bond that the network structure is formed from uncyclizedCN of PANOF. Therefore the tenacity of PANOF is remarkably increased.
基金financially supported by Postgraduate Research & Practice Innovation Program of Jiangsu Province (No. KYLX_1337)the Excellent Doctorial Dissertations Fund of Yangzhou University
文摘In this work, the polyacrylonitrile containing gadolinium nanofibers for thermal neutron protection were successfully fabricated by electrospunning and followed by in situ self-polymerization. Scanning electron microscopy(SEM) and energy-dispersive spectroscopy(EDS) results show that there are no beads on the smooth surface of the nanofibers and gadolinium elements are uniformly dispersed in the matrix. The thermal analysis and FTIR results prove that gadolinium methacrylate is induced in situ selfpolymerization during the heat treatment. The leaching rate of Gd^(3+) decreases from 79.97% to 10.74% tested by lowfield nuclear magnetic resonance(LF-NMR) method after the self-polymerization of gadolinium methacrylate in the matrix when the nanofibers were immersed in water for7 days. The thermal neutron shielding analysis calculated by MCNP program shows that above 99% thermal neutrons are absorbed when traveling through the 2-mm-thick polyacrylonitrile containing gadolinium nanofibers.
基金supported by the National Natural Science Foundation of China(Nos.51073011 and 50673011) the,National High Technology Research and Development Program of China("863 Program",No.2006AA06Z382)the National Basic Research Program of China("973 Program",No.2006CB605304)
文摘Orientation of copolymer polyacrylonitrile （PAN） chains during their deformation prior to stabilization and the further effect on the stabilization were investigated in detail. Results reveal that the orientation of PAN chains presents a saturation point of 69.51% when the deformation ratio reaches approximately 1.07, meanwhile the cyclization rather than the oxidation has a stronger dependence on the orientation of PAN chains during stabilization. The cyclization is facilitated that the cyclization degree is increasing while the activation energy is decreasing obviously as a consequence of the developing orientation of PAN fibers before the saturation point; however, it is restrained during the further deformation of PAN fibers after the point. The resulting carbon fibers obtained from the PAN fibers prepared at the saturation point possess the highest mechanical properties of 4.07 GPa in tensile strength and 249.0 GPa in tensile modulus.
基金financially supported by the National Natural Science Foundation of China(Nos.50821062,50673097)CAS Innovation Project(No.2007CB936400)
文摘The acoustical damping property of electrospun polyacrylonitrile （PAN） nanofibrous membranes with different thicknesses and porosities was investigated. The sound absorption coefficients were measured using the impedance tube instrument based on ISO10534-2：1998（E）. Results indicate that the first resonance absorption frequency of nanofibrous membranes shifts to the lower frequency with the increase of the back cavity or the thickness of membranes. Moreover, the sound absorption performance of the perforated pane/ can be greatly improved by combination with a thin layer of PAN nanofibrous membrane. Traditional acoustical damping materials （foam, fiber） coated with nanofibrous membranes have better acoustical performance in the low and medium frequency range than that of acoustical materials alone. All of the results demonstrate the PAN nanofibrous membrane is a suitable candidate for noise reduction.
文摘This paper describes the preparation of a membrane of polyacrylonitrile(PAN)and its corresponding membrane coated with polyaniline(PANI)for the adsorption of heavy metal ions.Scanning electron microscopy micrographs revealed that all the membranes exhibited nanofibrous morphology.The prepared membranes were characterized by Fourier transform infrared spectroscopy(FTIR).The prepared membranes were used as an adsorbent for hazardous heavy metal ions Pb^(2+) and Cr_(2)O^(2-)_(7).The adsorption capacity and the removal efficiency of the membranes were examined as function of the initial adsorbate concentration and pH of the medium.Coated membranes with PANI showed better adsorption performance and their direct current(DC)conductivities were correlated to heavy metal ion concentrations.Adsorption isotherms were also performed,and the adsorption process was tested according to the Langmuir and Freundlich models.The regeneration and reuse of the prepared membranes to re-adsorb heavy metal ions were also investigated.The enhancement in adsorption performance and reusability of PANI-coated membranes in comparison with non-coated ones is fully discussed.The results show that the maximum adsorption capacities of lead and chromate ions on the PANI-coated membranes are 290.12 and 1202.53 mg/g,respectively.
基金supported by the Research Program of Application Foundation and Advanced Technology from the Tianjin Municipal Science and Technology Committee(No.11JCZDJ24600)the Natural Science Foundationof China(No.20773093)
文摘The amidoximated polyacrylonitrile （PAN） fiber Fe complexeswere prepared and used as the heterogeneous Fenton catalysts for thedegradation of28 anionicwater soluble azodyes inwater under visible irradiation. The multiple linear regression （MLR） methodwas employed todevelop the quantitative structure property relationship （QSPR） model equations for thedecoloration and mineralization of azodyes. Moreover, the predictive ability of the QSPR model equationswas assessed using Leave-one-out （LOO） and cross-validation （CV） methods. Additionally, the effect of Fe content of catalyst and the sodium chloride inwater on QSPR model equationswere also investigated. The results indicated that the heterogeneous photo-Fentondegradation of the azodyeswithdifferent structureswas conducted in the presence of the amidoximated PAN fiber Fe complex. The QSPR model equations for thedyedecoloration and mineralizationwere successfullydeveloped using MLR technique. MW/S （molecularweightdivided by the number of sulphonate groups） and N N=N （the number of azo linkage） are considered as the most importantdetermining factor for thedyedegradation and mineralization, and there is a significant negative correlation between MW/S or N N=N anddegradation percentage or total organic carbon （TOC） removal. Moreover, LOO and CV analysis suggested that the obtained QSPR model equations have the better prediction ability. The variation in Fe content of catalyst and the addition of sodium chloridedid not alter the nature of the QSPR model equations.
基金National Research Foundation (NRF, grant no. SFH14073184214) for providing financial support
文摘A cheap and simple sample preparation method, consisting of a dispersive solid-phase method and an adsorbent, activated carbon decorated PAN nanofibers, was employed and used for the extraction of antibiotics(ciprofloxacin, danofloxacin, and enrofloxacin) in wastewater. Electrospun PAN nanofibers that were decorated with activated carbon produced from waste tires were used as the solid phase and the antibiotics analyzed by using high-performance liquid chromatography. Parameters such as pH, mass of adsorbent(MA),extraction volume(EV), and extraction time(ET) were optimized owing to their potential effect on the extraction of antibiotics from water. The recovery of all antibiotics was satisfactory, in the range of 90%–99%.The limits of detection and quantification were 0.05, 0.11, 0.20, and 0.53, 1.21, 2.17 mg/L, respectively. The precision was determined from the repeatability and reproducibility and expressed as the intra-day(n=20)and inter-day(n=5) precision. The intra-day and inter-day precision was reported in terms of the percentage relative standard deviation, which was 3% and 4%, respectively. The adsorption capacity of the activated carbon-decorated PAN nanofibers was satisfactory, and the reusability of the adsorbent was impressive when reused ten times. The accuracy of the dispersive solid phase extraction(DSPE) was validated by spike recovery tests; the results proved the reliability and efficiency of adsorbing antibiotics from wastewater. Finally, the proposed method was applied to wastewater samples collected from a wastewater treatment plant, which included influent, secondary, and effluent wastewater.
基金Project(2006CB600903) supported by the National Basic Research Program of China
文摘A novel carbon fiber pretreatment was proposed.Polyacrylonitrile(PAN)-based carbon fibers were first anodized in H3PO4 electrolyte to achieve an active surface,and then coated with Mo-B catalysts by immersed the carbon fibers in a uniformly dispersed Mo-B sol.The as-treated carbon fibers were then graphitized at 2 400 ℃ for 2 h.The structural changes were characterized by X-ray diffractometry(XRD),Raman spectroscopy,scanning electron microscopy(SEM) and high-resolution transmission electronic microscopy(HRTEM).The results show that much better graphitization can be achieved in the presence of Mo-B,with an interlayer spacing(d002) of 0.335 8 nm and a crystalline size(Lc) of 28 nm.
基金supported by Zhejiang Provincial Natural Science Foundation(No. LY21B070005)National Undergraduate Training Program for Innovation and Entrepreneurship of China(Nos. 202110345015 and 202110345016)Self designed scientific research project of Zhejiang Normal University(No. 2021ZS06)。
文摘In this report, nitrogen-doped porous carbons were synthesized from polyacrylonitrile fiber by a facile two-step synthesis process i.e. carbonization followed by KOH activation. Activation temperature and KOH/carbon ratio are two parameters to tune the porosity and surface chemical properties of sorbents. The as-obtained sorbents were carefully characterized.Special attention was paid concerning the change of sorbents’ morphology with respect to synthesis conditions. Under the activation temperatures of this study, the sorbents can still retain their fibrous structure when the KOH/carbon mass ratio is 1. Further increasing the KOH amount will destroy the original morphology of polyacrylonitrile fiber. CO_(2)adsorption performance tests show that a sorbent retaining the fibrous shape possesses the highest CO_(2)uptake of 3.95 mmol/g at 25℃and 1 bar. Comprehensive investigation found that the mutual effect of narrow microporosity and doped N content govern the CO_(2)adsorption capacity of these adsorbents. Furthermore, these polyacrylonitrile fiber-derived carbons present multiple outstanding CO_(2)capture properties such as excellent recyclability, high CO_(2)/N_(2)selectivity, fast adsorption kinetics, suitable heat of adsorption, and good dynamic adsorption capacity. Hence, nitrogen-doped porous carbons with fibrous structure are promising in CO_(2)capture.
基金supported by the National Natural Science Foundation of China (Nos. 51678409, 145 708407, 21476172)Tianjin Science Technology Research Funds of China (Nos. 16JCZDJC37500, 15JCZDJC38300)+1 种基金Program for Innovative Research Team in University of Tianjin (No. TD13-5042)Science Foundation for the Youth Teachers of Peking Union Medical College (No. 2014ZLGC0754)
文摘In this study, biologically inspired silk fibroin grafted polyacrylonitrile(SF-g-PAN) filtration membrane was prepared using ZnCl_2 aqueous solution as solvent, avoiding the use of organic solvents. Phase inversion occurred when Zn^(2+)and Cl-ions gradually diffused into water, creating a well-connected ion channel network and the SF-g-PAN filtration membrane was obtained. The membranes were observed by SEM and 3D ultra-depth microscope. The hydrophilic property, pore size distribution and dye rejection of the membrane were investigated. Results showed that the membrane has no finger hole formation because ZnCl_2 aqueous solution has a lower curing rate parameter compared with organic solvents. SF-gPAN membrane possessed good anti-fouling properties and pH sensitivity. The pore size distribution of the SF-g-PAN membrane was 0.25–1.04 nm. The rejection of direct yellow 27(Mw = 662.6) and amaranth(Mw = 604.5) was 96.51% and 30.63%, with the flux of 72.32 L m^(-2) h^(-1) and 73.83 L m^(-2) h^(-1) respectively at0.1 MPa. The SF-g-PAN membrane has a wide range of applications prospect in fine separation, dye desalination, waste water treatment and biomedical fields.
文摘Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.
基金Project supported by the National Natural Science Foundation of China(51573023,51803012)。
文摘Eu^(3+) ions were grafted onto the surface of electrospun polyacrylonitrile(PAN)nanofibers through coordination effect between C≡N groups on PAN nanofibers and Eu^(3+) ions,and benzoic acid(BA)was introduced as an assistant ligand.The impacts of concentrations of Eu^(3+) ions and BA,and reaction time on the properties of final products were investigated.The results reveal that Eu^(3+) ions can be successfully grafted onto PAN nanofibers,but the fluorescence intensity of the obtained PAN@Eu^(3+) nanofibers is very weak.After BA is introduced as the assistant ligand,the fluorescence intensity of the obtained PAN@(Eu^(3+)/BA)nanofibers is greatly stronger than that of PAN@Eu^(3+)nanofibers,and meanwhile,concentration quenching effect of Eu^(3+) ions can be effectively restrained.Furthermore,the superior structure of PAN@(Eu^(3+)/BA)nanofibers not only brings the effective utilization of precious elemental europium,but also guarantees high mechanical strength.
基金supported by the National Natural Science Foundation of China(No.21805201)the NSFC-NRF China-Korea International Joint Research Project(No.51911540473)+1 种基金the Postdoctoral Research Foundation of China(No.2018T110544 and No.2017 M611899)the support by Suzhou Key Laboratory for Advanced Carbon Materials and Wearable Energy Technologies。
文摘Sulfurized polyacrylonitrile(SPAN)represents a unique class of cathode material for lithium sulfur(Li-S)batteries as it eradicates the polysulfides shuttling issue in carbonate-based electrolyte.However,due to the essential chemical S-linking and organic nature of SPAN,the active mass percentage and rate capability are two bottleneck issues preventing its ultimate deployment outside of laboratories.In the current work,aiming to endow both the charge conductivity and catalytic activity to SPAN for maximizing the redox kinetics of S conversion,a freestanding nanofibrous SPAN cathode embedding conductive CNTs and atomically dispersed Co centers is fabricated via multivariate electrospinning.While the CNTs enable dramatically enhancing the fiber conductivity and generating mesoscopic porosity for facilitating charge and mass transportation,the cross-linking of SPAN by Co-N_(4) S motifs creates extra charge conduction pathways and further serves as the catalytic active sites for expediting redox S conversion.As a result,an extraordinary Li-SPAN performance is achieved with a high specific capacity up to 1856 mAh g^(-1)@0.2 C,a superb rate capability up to 10 C,and an ultra-long battery life up to 1500 cycles@1 C.Consequently,our study here provides insights into the adoption of coordination chemistry to maximize the sulfur utilization by ensuring a more complete redox conversion from SPAN to Li2 S,and vice versa.
基金financially supported by the National Natural Science Foundation of China(Nos.21774053,21975111,and 51903123)Natural Science Foundation of Jiangsu Province(No.BK20190760)+1 种基金Major Special Projects of Jiangxi Provincial Department of Science and Technology(No.20114ABF05100)Technology Plan Landing Project of Jiangxi Provincial Department of Education(No.GCJ2011-24)。
文摘High-performance carbon nanofibers are highly dependent on the performance of their precursors,especially polyacrylonitrile(PAN).In this work,the copolymer of PAN(coPAN)was synthesized for electrospinning.A self-assembling set-up was used for the stretching of single coPAN nanofibers.FTIR and Raman spectroscopies were used to characterize the chemical structure of coPAN nanofibers.Scanning electron microscopy(SEM)and atomic force microscopy(AFM)were used to monitor the morphology of single coPAN nanofibers under different drawing times.Micro-tensile test was used to determine the mechanical properties of single coPAN nanofibers.The results indicated that the drawing led to an increase in degree of molecular orientation along the fiber axis from 0.656 to 0.808,tensile strength from 304 MPa to 595 MPa,and modulus from 3.1 GPa to 12.4 GPa.This research would provide fundamental information of high-performance electrospun coPAN nanofibers and offer opportunities for the preparation of high-performance carbon nanofibers.
基金supported by the National Natural Science Foundation of China (No. 20874057)the Key Natural Science Foundation of Shandong Province of China (No. ZR2011BZ001)
文摘A new A-B-A type of block copolymers,polyacrylonitrile-block-polydimethylsiloxane-block-polyacrylonitrile（PAN-b-PDMSb-PAN）,which comprises two polymer blocks of different polarities and compatibilities,were synthesized for the first time via reversible addition-fragmentation chain transfer polymerization.Reaction kinetics was investigated.PAN-b-PDMS-b-PAN films were prepared by spin-coating on glass chips.Significant order on the film surface morphologies was observed.
基金supported by the National Natural Science Foundation of China(Grant nos.21773077,51632001,and 51532005)the Ministry of Science and Technology“973”program(Grant No.2015CB258400)the National Key R&D Program of China(2018YFB0905400)。
文摘Sulfurized polyacrylonitrile(SPAN)as a promising cathode material for lithium sulfur(Li-S)batteries has drawn increasing attention for its improved electrochemical performance in carbonate-based electrolyte.However,the relatively poor electronic and ionic conductivities of SPAN limit its high-rate and lowtemperature performances.In this work,a novel one-dimensional nanofiber SPAN(SFPAN)composite is developed as the cathode material for Li-S batteries.Benefitting from its one-dimensional nanostructure,the SFPAN composite cathode provides fast channels for the migration of ions and electronics,thus effectively improving its electrochemical performance at high rates and low temperature.As a result,the SFPAN maintains a high reversible specific capacity^1200 mAh g−1 after 400 cycles at 0.3 A g−1 and can deliver a high capacity of^850 mAh g−1 even at a high current density of 12.5 A g−1.What is more,the SFPAN can achieve a capacity of^800 mAh g−1 at 0℃and^1550 mAh g−1 at 60℃,thus providing a wider temperature range of applications.This work provides new perspectives on the cathode design for high-rate lithium-sulfur batteries.
