Pulse pile-up is a problem in nuclear spectroscopy and nuclear reaction studies that occurs when two pulses overlap and distort each other,degrading the quality of energy and timing information.Different methods have ...Pulse pile-up is a problem in nuclear spectroscopy and nuclear reaction studies that occurs when two pulses overlap and distort each other,degrading the quality of energy and timing information.Different methods have been used for pile-up rejection,both digital and analogue,but some pile-up events may contain pulses of interest and need to be reconstructed.The paper proposes a new method for reconstructing pile-up events acquired with a neutron detector array(NEDA)using an one-dimensional convolutional autoencoder(1D-CAE).The datasets for training and testing the 1D-CAE are created from data acquired from the NEDA.The new pile-up signal reconstruction method is evaluated from the point of view of how similar the reconstructed signals are to the original ones.Furthermore,it is analysed considering the result of the neutron-gamma discrimination based on charge comparison,comparing the result obtained from original and reconstructed signals.展开更多
An energy model for the structure transformation of pile-ups of grain boundary dislocations(GBD)at the triple-junction of the grain boundary of ultrafine-grain materials was proposed.The energy of the pile-up of the G...An energy model for the structure transformation of pile-ups of grain boundary dislocations(GBD)at the triple-junction of the grain boundary of ultrafine-grain materials was proposed.The energy of the pile-up of the GBD in the system was calculated by the energy model,the critical geometric and mechanical conditions for the structure transformation of head dislocation of the pile-up were analyzed,and the influence of the number density of the dislocations and the angle between Burgers vectors of two decomposed dislocations on the transformation mode of head dislocation was discussed.The results show when the GBD is accumulated at triple junction,the head dislocation of the GBD is decomposed into two Burgers vectors of these dislocations unless the angle between the two vectors is less than 90°,and the increase of applied external stress can reduce the energy barrier of the dislocation decomposition.The mechanism that the ultrafine-grained metal material has both high strength and plasticity owing to the structure transformation of the pile-up of the GBD at the triple junction of the grain boundary is revealed.展开更多
The influence of pile-up on the nanoindentation measurements in Cu 2wt.%Be samples with precipitates was carefully studied.The precipitates were formed by aging treatments for 1 h at different temperatures between 540...The influence of pile-up on the nanoindentation measurements in Cu 2wt.%Be samples with precipitates was carefully studied.The precipitates were formed by aging treatments for 1 h at different temperatures between 540 and 680 K.The load depth curves were analyzed using the classical Oliver and Pharr method,and the obtained elastic modulus and hardness were compared with values estimated by other techniques.An important level of pile-up was found in samples with precipitates and differences in the load depth curves were observed between the unaged and aged samples.A correction of the contact depth considering the pile-up proposed by Loubet was used for hardness estimation.For the determination of the elastic modulus,an approach based on the relation between the ratio of unloading work to indentation total work,with the ratio H/Er(H is the hardness;Er is the reduced modulus),was employed.A specific relation between both parameters was developed.展开更多
The influence of material micro-defects on the main crack growth under pure shear loading is studied theoretically.The mechanism behind the initiation of micro-cracks and crack propagation induced by dislocation accum...The influence of material micro-defects on the main crack growth under pure shear loading is studied theoretically.The mechanism behind the initiation of micro-cracks and crack propagation induced by dislocation accumulation near the grain boundary(GB)ismainly considered,and the influence of dislocation accumulation on the main crack propagation is analyzed.The research results reveal that the initiation of micro-cracks near the GB is prior to the propagation of the main crack.In a hydrogen environment,hydrogen can cause serious embrittlement of the crack tip and promote crack growth.The energy release rate in the main crack growth direction in the dislocation emission direction is the highest.Therefore,the main crack will eventually merge with the micro-cracks at the GB along the direction of the slip band,resulting in fracture of the crystal material.The research presented in this paper provides some new information for the first stage of crack propagation and contributes to the analysis of the mechanism of crystal metal fracture.展开更多
As a unique probe,the precision measurement of pp solar neutrinos is important for studying the sun’s energy mechanism as it enables monitoring the thermodynamic equilibrium and studying neutrino oscillations in the ...As a unique probe,the precision measurement of pp solar neutrinos is important for studying the sun’s energy mechanism as it enables monitoring the thermodynamic equilibrium and studying neutrino oscillations in the vacuum-dominated region.For a large-scale liquid scintillator detector,a bottleneck for pp solar neutrino detection is the pile-up events of intrinsic14C decay.This paper presents a few approaches to discriminating between pp solar neutrinos and ^(14)C pile-up events by considering the differences in their time and spatial distributions.In this study,a Geant4-based Monte Carlo simulation is conducted.Multivariate analysis and deep learning technology are adopted to investigate the capability of ^(14)C pile-up reduction.The BDTG (boosted decision trees with gradient boosting) model and VGG network demonstrate good performance in discriminating pp solar neutrinos and ^(14)C double pile-up events.Under the ^(14)C concentration assumption of 5×10-18g/g,the signal significance can achieve 10.3 and 15.6 using the statistics of only one day.In this case,the signal efficiency for discrimination using the BDTG model while rejecting 99.18% ^(14)C double pile-up events is 51.1%,and that for the case where the VGG network is used while rejecting 99.81%of the ^(14)C double pile-up events is 42.7%.展开更多
A novel FPGA-based pulse pile-up rejection method for single photon imaging detectors is reported. Tile method is easy to implement in FPGAs for real-time data processing. The rejection principle and entire design are...A novel FPGA-based pulse pile-up rejection method for single photon imaging detectors is reported. Tile method is easy to implement in FPGAs for real-time data processing. The rejection principle and entire design are introduced in detail. The photon counting imaging detector comprises a micro-channel plate （MCP） stack, and a wedge and strip anode （WSA）. The resolution mask pattern in front of the MCP can be reconstructed after data processing in the FPGA. For high count rates, the rejection design can effectively reduce the impact of the pulse pile-up on the image. The resolution can reach up to 140μm. The pulse pile-up rejection design can also be applied to high-energy physics and particle detection.展开更多
Purpose In this work,we present the pile-up fractions on the follow-up X-ray telescope(FXT)onboard Einstein Probe using its different read-out modes and filters for various source fluxes.This investigation could help ...Purpose In this work,we present the pile-up fractions on the follow-up X-ray telescope(FXT)onboard Einstein Probe using its different read-out modes and filters for various source fluxes.This investigation could help understand the pile-up effect on FXT and choose the filter and readout mode when observing dedicated sources.Methods We use the Simulation of X-ray Telescopes package to conduct the simulation from incidence of photons from celestial sources to the detection on the FXT pnCCD.Based on the reconstructed signals,we make a statistic on the counts of incident photons and detected events to obtain the pile-up fraction for each set of read-out mode and filter configuration.Results and conclusion From the perspective of incident photons among all detected events,the pile-up fraction increases monotonically with the brightness of the source.From the viewpoints of valid detected events,the fraction values exhibit an initial nonlinear increase,followed by a decrease,and a subsequent increase as the source fluxes increase,attributed to the presence of pile-up effects and the selection criteria for valid events.For some certain fluxes,the fraction value is larger in faster readout modes than lower modes.From the viewpoint of incident photon in valid detected events,a 10% pile-up fraction corresponds to 5 mCrab in full frame mode(FF),120 mCrab in partial windowed mode(PW),3 Crab in Timing mode(TM)under the medium filter type.At these fluxes,the deviation of the fitted photon indices is within 10% from that of the input source model.展开更多
The main scientific payload of Macao Science Satellite-1B is a solar soft X-ray detection unit.To obtain an accurate solar X-ray spectrum,we have designed low-noise,high-throughput electronics.Solar radiation is detec...The main scientific payload of Macao Science Satellite-1B is a solar soft X-ray detection unit.To obtain an accurate solar X-ray spectrum,we have designed low-noise,high-throughput electronics.Solar radiation is detected using a low-leakage silicon drift detector(SDD),which is cooled to-30℃.The SDD output is processed using two parallel shaping amplifiers with peaking times of 315 ns and 65 ns.The amplifiers are designed using two-pole multiple-feedback active low-pass filters optimized to achieve a Bessel response.The differential output of the shaping amplifier generates a bipolar signal.The phase of the differential stage is tuned to ensure zero crossing corresponding to the peak of the shaping amplifier.A high-speed switch is inserted between the shaping amplifier and the peak-hold capacitor,and the peak value is maintained by turning off the switch.Fast and slow peak-hold circuits share a common ADC via time-division multiplexing.Both peak values are sampled for space-background rejection.Traditional pile-up detection methods cannot distinguish pulses that overlap in a fast channel.In this study,the differential of the“fast shaping”is selected,enabling the distinction of events separated by as little as 65ns,which is crucial for solar flare detection.The energy resolution is measured to be 138 eV at 5.90 keV.The centroid drift is less than 3.6 eV between-5℃ and 20℃.Compared with other solar X-ray instruments,this study demonstrates improved energy resolution with a lower peaking time,indicating a higher solar flare detection capability.展开更多
Rubble deposits with a high concentration of rock debris were created after the powerful earthquakes in Jiuzhaigou.Because of the restricted soil resources,water leaks,and nutrient deficits,these deposits pose serious...Rubble deposits with a high concentration of rock debris were created after the powerful earthquakes in Jiuzhaigou.Because of the restricted soil resources,water leaks,and nutrient deficits,these deposits pose serious obstacles for vegetation regeneration.The purpose of this study was to investigate the main mechanisms controlling soil water retention and evaluate the effects of different amendments on the hydraulic characteristics and water-holding capacity of collapsed rubble soils.Finegrained soil,forest humus,crushed straw,and organic components that retain water were added to the altered soils to study the pore structure images and soil-water characteristic curves.Comparing understory humus to other supplements,the results showed a considerable increase in the soil's saturated and wilting water content.The saturated water content and wilting water content rose by 17.9%and 4.3%,respectively,when the percentage of understory soil reached 30%.Additionally,the enhanced soil's microporosity and total pore volume increased by 45.33%and 11.27%,respectively,according to nuclear magnetic imaging.It was shown that while clay particles and organic matter improved the soil's ability to adsorb water,they also increased the soil's total capacity to store water.Fine particulate matter did this by decreasing macropores and increasing capillary pores.These results offer an essential starting point for creating strategies for soil repair that would encourage the restoration of plants on slopes that have been damaged.展开更多
Pile-up around indenter is usually observed during instrumented indentation tests on bulk metallic glass. Neglecting the pile-up effect may lead to errors in evaluating hardness,Young’s modulus,stress-strain response...Pile-up around indenter is usually observed during instrumented indentation tests on bulk metallic glass. Neglecting the pile-up effect may lead to errors in evaluating hardness,Young’s modulus,stress-strain response,etc. Finite element analysis was employed to implement numerical simulation of spherical indentation tests on bulk metallic glass. A new model was proposed to describe the pile-up effect. By using this new model,the contact radius and hardness of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass were obtained under several different indenter loads with pile-up,and the results agree well with the data generated by numerical simulation.展开更多
基金partially supported by MICIU MCIN/AEI/10.13039/501100011033Spain with grant PID2020-118265GB-C42,-C44,PRTR-C17.I01+1 种基金Generalitat Valenciana,Spain with grant CIPROM/2022/54,ASFAE/2022/031,CIAPOS/2021/114the EU NextGenerationEU,ESF funds,and the National Science Centre (NCN),Poland (grant No.2020/39/D/ST2/00466)
文摘Pulse pile-up is a problem in nuclear spectroscopy and nuclear reaction studies that occurs when two pulses overlap and distort each other,degrading the quality of energy and timing information.Different methods have been used for pile-up rejection,both digital and analogue,but some pile-up events may contain pulses of interest and need to be reconstructed.The paper proposes a new method for reconstructing pile-up events acquired with a neutron detector array(NEDA)using an one-dimensional convolutional autoencoder(1D-CAE).The datasets for training and testing the 1D-CAE are created from data acquired from the NEDA.The new pile-up signal reconstruction method is evaluated from the point of view of how similar the reconstructed signals are to the original ones.Furthermore,it is analysed considering the result of the neutron-gamma discrimination based on charge comparison,comparing the result obtained from original and reconstructed signals.
基金financial supports from the National Natural Science Foundation of China(Nos.51161003,51561031)the Natural Science Foundation of Guangxi,China(No.2018GXNSFAA138150)。
文摘An energy model for the structure transformation of pile-ups of grain boundary dislocations(GBD)at the triple-junction of the grain boundary of ultrafine-grain materials was proposed.The energy of the pile-up of the GBD in the system was calculated by the energy model,the critical geometric and mechanical conditions for the structure transformation of head dislocation of the pile-up were analyzed,and the influence of the number density of the dislocations and the angle between Burgers vectors of two decomposed dislocations on the transformation mode of head dislocation was discussed.The results show when the GBD is accumulated at triple junction,the head dislocation of the GBD is decomposed into two Burgers vectors of these dislocations unless the angle between the two vectors is less than 90°,and the increase of applied external stress can reduce the energy barrier of the dislocation decomposition.The mechanism that the ultrafine-grained metal material has both high strength and plasticity owing to the structure transformation of the pile-up of the GBD at the triple junction of the grain boundary is revealed.
基金supported by Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET)Comisión de Investigaciones Científicas de la Provincia de Buenos Aires (CICPBA)SECAT (UNCPBA) Argentina
文摘The influence of pile-up on the nanoindentation measurements in Cu 2wt.%Be samples with precipitates was carefully studied.The precipitates were formed by aging treatments for 1 h at different temperatures between 540 and 680 K.The load depth curves were analyzed using the classical Oliver and Pharr method,and the obtained elastic modulus and hardness were compared with values estimated by other techniques.An important level of pile-up was found in samples with precipitates and differences in the load depth curves were observed between the unaged and aged samples.A correction of the contact depth considering the pile-up proposed by Loubet was used for hardness estimation.For the determination of the elastic modulus,an approach based on the relation between the ratio of unloading work to indentation total work,with the ratio H/Er(H is the hardness;Er is the reduced modulus),was employed.A specific relation between both parameters was developed.
基金supported by the National Natural Science Foundation of China(Grant No.11472230).
文摘The influence of material micro-defects on the main crack growth under pure shear loading is studied theoretically.The mechanism behind the initiation of micro-cracks and crack propagation induced by dislocation accumulation near the grain boundary(GB)ismainly considered,and the influence of dislocation accumulation on the main crack propagation is analyzed.The research results reveal that the initiation of micro-cracks near the GB is prior to the propagation of the main crack.In a hydrogen environment,hydrogen can cause serious embrittlement of the crack tip and promote crack growth.The energy release rate in the main crack growth direction in the dislocation emission direction is the highest.Therefore,the main crack will eventually merge with the micro-cracks at the GB along the direction of the slip band,resulting in fracture of the crystal material.The research presented in this paper provides some new information for the first stage of crack propagation and contributes to the analysis of the mechanism of crystal metal fracture.
基金supported by National Natural Science Foundation of China(No.12005044)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA10011200)Guangxi Science and Technology Program(No.GuiKeAD21220037).
文摘As a unique probe,the precision measurement of pp solar neutrinos is important for studying the sun’s energy mechanism as it enables monitoring the thermodynamic equilibrium and studying neutrino oscillations in the vacuum-dominated region.For a large-scale liquid scintillator detector,a bottleneck for pp solar neutrino detection is the pile-up events of intrinsic14C decay.This paper presents a few approaches to discriminating between pp solar neutrinos and ^(14)C pile-up events by considering the differences in their time and spatial distributions.In this study,a Geant4-based Monte Carlo simulation is conducted.Multivariate analysis and deep learning technology are adopted to investigate the capability of ^(14)C pile-up reduction.The BDTG (boosted decision trees with gradient boosting) model and VGG network demonstrate good performance in discriminating pp solar neutrinos and ^(14)C double pile-up events.Under the ^(14)C concentration assumption of 5×10-18g/g,the signal significance can achieve 10.3 and 15.6 using the statistics of only one day.In this case,the signal efficiency for discrimination using the BDTG model while rejecting 99.18% ^(14)C double pile-up events is 51.1%,and that for the case where the VGG network is used while rejecting 99.81%of the ^(14)C double pile-up events is 42.7%.
基金Supported by the National Natural Science Foundation of China under Grant No 11375179
文摘A novel FPGA-based pulse pile-up rejection method for single photon imaging detectors is reported. Tile method is easy to implement in FPGAs for real-time data processing. The rejection principle and entire design are introduced in detail. The photon counting imaging detector comprises a micro-channel plate （MCP） stack, and a wedge and strip anode （WSA）. The resolution mask pattern in front of the MCP can be reconstructed after data processing in the FPGA. For high count rates, the rejection design can effectively reduce the impact of the pulse pile-up on the image. The resolution can reach up to 140μm. The pulse pile-up rejection design can also be applied to high-energy physics and particle detection.
基金supported by the Einstein-Probe(EP)Program which is funded by the Strategic Priority Research Program of the Chinese Academy of Sciences Grant No.XDA15310303 and No.XDA15310000.
文摘Purpose In this work,we present the pile-up fractions on the follow-up X-ray telescope(FXT)onboard Einstein Probe using its different read-out modes and filters for various source fluxes.This investigation could help understand the pile-up effect on FXT and choose the filter and readout mode when observing dedicated sources.Methods We use the Simulation of X-ray Telescopes package to conduct the simulation from incidence of photons from celestial sources to the detection on the FXT pnCCD.Based on the reconstructed signals,we make a statistic on the counts of incident photons and detected events to obtain the pile-up fraction for each set of read-out mode and filter configuration.Results and conclusion From the perspective of incident photons among all detected events,the pile-up fraction increases monotonically with the brightness of the source.From the viewpoints of valid detected events,the fraction values exhibit an initial nonlinear increase,followed by a decrease,and a subsequent increase as the source fluxes increase,attributed to the presence of pile-up effects and the selection criteria for valid events.For some certain fluxes,the fraction value is larger in faster readout modes than lower modes.From the viewpoint of incident photon in valid detected events,a 10% pile-up fraction corresponds to 5 mCrab in full frame mode(FF),120 mCrab in partial windowed mode(PW),3 Crab in Timing mode(TM)under the medium filter type.At these fluxes,the deviation of the fitted photon indices is within 10% from that of the input source model.
基金supported by the National Natural Science Foundation of China(No.12035020)National Key Scientific Instrument and Equipment Development Projects of China(No.42327802).
文摘The main scientific payload of Macao Science Satellite-1B is a solar soft X-ray detection unit.To obtain an accurate solar X-ray spectrum,we have designed low-noise,high-throughput electronics.Solar radiation is detected using a low-leakage silicon drift detector(SDD),which is cooled to-30℃.The SDD output is processed using two parallel shaping amplifiers with peaking times of 315 ns and 65 ns.The amplifiers are designed using two-pole multiple-feedback active low-pass filters optimized to achieve a Bessel response.The differential output of the shaping amplifier generates a bipolar signal.The phase of the differential stage is tuned to ensure zero crossing corresponding to the peak of the shaping amplifier.A high-speed switch is inserted between the shaping amplifier and the peak-hold capacitor,and the peak value is maintained by turning off the switch.Fast and slow peak-hold circuits share a common ADC via time-division multiplexing.Both peak values are sampled for space-background rejection.Traditional pile-up detection methods cannot distinguish pulses that overlap in a fast channel.In this study,the differential of the“fast shaping”is selected,enabling the distinction of events separated by as little as 65ns,which is crucial for solar flare detection.The energy resolution is measured to be 138 eV at 5.90 keV.The centroid drift is less than 3.6 eV between-5℃ and 20℃.Compared with other solar X-ray instruments,this study demonstrates improved energy resolution with a lower peaking time,indicating a higher solar flare detection capability.
基金jointly funded by the Sichuan Provincial Natural Science Foundation of China(Grant No.2023NSFSC0378)the Jiuzhaigou Lake Swamp and River Ecological Restoration Research Project(N5132112022000246)the Research base and Support provided by Jiuzhaigou Administration for this study。
文摘Rubble deposits with a high concentration of rock debris were created after the powerful earthquakes in Jiuzhaigou.Because of the restricted soil resources,water leaks,and nutrient deficits,these deposits pose serious obstacles for vegetation regeneration.The purpose of this study was to investigate the main mechanisms controlling soil water retention and evaluate the effects of different amendments on the hydraulic characteristics and water-holding capacity of collapsed rubble soils.Finegrained soil,forest humus,crushed straw,and organic components that retain water were added to the altered soils to study the pore structure images and soil-water characteristic curves.Comparing understory humus to other supplements,the results showed a considerable increase in the soil's saturated and wilting water content.The saturated water content and wilting water content rose by 17.9%and 4.3%,respectively,when the percentage of understory soil reached 30%.Additionally,the enhanced soil's microporosity and total pore volume increased by 45.33%and 11.27%,respectively,according to nuclear magnetic imaging.It was shown that while clay particles and organic matter improved the soil's ability to adsorb water,they also increased the soil's total capacity to store water.Fine particulate matter did this by decreasing macropores and increasing capillary pores.These results offer an essential starting point for creating strategies for soil repair that would encourage the restoration of plants on slopes that have been damaged.
基金the National Natural Science Foundation of China (Grant Nos. 10725211, 10721202 and 10472119) the Key Project of Chinese Academy of Sciences (Grant Nos. KJCX2-YW-M04 and KJCX-SW-L08)
文摘Pile-up around indenter is usually observed during instrumented indentation tests on bulk metallic glass. Neglecting the pile-up effect may lead to errors in evaluating hardness,Young’s modulus,stress-strain response,etc. Finite element analysis was employed to implement numerical simulation of spherical indentation tests on bulk metallic glass. A new model was proposed to describe the pile-up effect. By using this new model,the contact radius and hardness of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass were obtained under several different indenter loads with pile-up,and the results agree well with the data generated by numerical simulation.
