The contact characteristics between cycloidal gear teeth and pinwheel teeth significantly impact the operational performance of cycloidal pinwheel mechanisms.Current research methods tend to rely primarily on theoreti...The contact characteristics between cycloidal gear teeth and pinwheel teeth significantly impact the operational performance of cycloidal pinwheel mechanisms.Current research methods tend to rely primarily on theoretical calculations,with limited use of experimental methods for detecting dynamic contact properties.We propose a novel method for testing the dynamic contact characteristics of cycloidal pinwheel mechanisms.By combining Hertzian contact theory and contact strength theory,we establish a force and meshing stiffness model for the cycloidal and pinwheel gears,and determine the maximum contact stress and variations in pinwheel gear force and meshing stiffness.Based on the principle of photoelasticity,we built a testing platform for the cycloidal pinwheel mechanism to assess its contact characteristics.This platform provides the stress distribution of the cycloidal pinwheel mechanism and allows us to deduce key parameters such as the number of meshing teeth and the meshing interval.This study provides an experimental method for investigating the contact characteristics of cycloidal pinwheel mechanisms.展开更多
Stress separation is usually achieved by solving differential equations of equilibrium after parameter determination from isochromatics and isoclinics.The numerical error resulting from the stress determination is a m...Stress separation is usually achieved by solving differential equations of equilibrium after parameter determination from isochromatics and isoclinics.The numerical error resulting from the stress determination is a main concern as it is always a function of parameters in discretization.To improve the accuracy of stress calculation,a novel meshless barycentric rational interpolation collocation method(BRICM)is proposed.The derivatives of the shear stress on the calculation path are determined by using the differential matrix which converts the differential form of the equations of equilibrium into a series of algebraic equations.The advantage of the proposed method is that the auxiliary lines,grids,and error accumulation which are commonly used in traditional shear difference methods(SDMs)are not required.Simulation and experimental results indicate that the proposed meshless method is able to provide high computational accuracy in the full-field stress determination.展开更多
Objective: To compare the biomechanical basis of 3 different internal fixation methods: nitinol patellar concentrator (NT-PC), tension band and wire circle in treating patellar fractures. Methods: The epoxy resin thre...Objective: To compare the biomechanical basis of 3 different internal fixation methods: nitinol patellar concentrator (NT-PC), tension band and wire circle in treating patellar fractures. Methods: The epoxy resin three dimensional photoelasticity patellar models were made by precise moulding, and were fixated by nitinol patellar concentrator (NT-PC), tension band and wire circle respectively. The patellar models with frozen stress stripes were put into the polarized light field and the stress distributions were compared. As for the model fixated by NT-PC, by dividing layer, photographing and tracing, we used the iterative method to calculate the stress value of every internal node of the epoxy resin patellar model, and the character of stress was analyzed. Results: An overall stress field was yielded when the patellar model was fixated by NT-PC, and the stripes were more than that of tension band model and wire circle model, which have only few stress stripes in the fixated layers. Further analysis indicated that there were continuous fixated stresses in the facies articularis and distal pole of patella, and the character of stresses produced by NT-PC were mainly in longitudinal direction, then in transverse direction. The shearing stresses were small. Conclusion: The initiative and continuous memorial stress of NT-PC and its overall stress distribution character are the essence of NT-PC distinguished with tension band and wire circle in treating patellar fractures. The stress character produced by NT-PC is good for the stability of fracture site and prompts fracture healing.展开更多
Objective: To analyze the biomechanical elements of Nitinol Patellar Concentrator (NT-PC) in heating commi nuted patellar fractures. Methods: The epoxy resin three dimensional photoelasticity pobal model was loaded wi...Objective: To analyze the biomechanical elements of Nitinol Patellar Concentrator (NT-PC) in heating commi nuted patellar fractures. Methods: The epoxy resin three dimensional photoelasticity pobal model was loaded with Nitinol Patellar Connector and frozen. After dividing layer, photographing and tracing, iterative method was used to calculate the stress value of every tuteed node. Rasults: Stress values of 1 262 nodes scattered in 12 layers were obtained The stress distribution indicated that an overall stress field was yield when the NT-PC fixated the patellar model, and there existed fixative stress in the facies articularis and distal pole of the patellar model. Conclusion: The NT-PC has evident therapeutic effect for the comminuted patellar fractures. The existing stress is helpful in maintaining anatomical reduction and enhancing fracture healing.展开更多
The dynamic photoelastic technique is employed to visualize and quantify the propagation properties of backward Lamb waves in a plate. Higher energy leakage of second-order symmetric backward wave mode S2b in contrast...The dynamic photoelastic technique is employed to visualize and quantify the propagation properties of backward Lamb waves in a plate. Higher energy leakage of second-order symmetric backward wave mode S2b in contrast to third-order anti-symmetric backward mode A3b is shown by the dispersion curve of a plate immersed in water, and then verified by experiments. To avoid the considerable high leakage, the plate is placed in air, both group and phase velocities of modes S2b and A3b in the glass plate are experimentally measured. In comparison with the theoretical values, less than 5% errors are found in experiments.展开更多
This paper presents an energy principle, zero different principle of coupledsystems in photoelasticity, from which the potential energy, the complementary energy,generalized potential energy and generalized complemen...This paper presents an energy principle, zero different principle of coupledsystems in photoelasticity, from which the potential energy, the complementary energy,generalized potential energy and generalized complementary energy variationalprinciples of the coupled systems in photoelasticity are derived What is called the coupled systems means that two deformational bodies, forwhich figures, sizes,loads and boundary conditions are the same and they are all inactual states but they are made of different materials.Prototype body and model body in photoelasticity are essentially the coupledsystems, therefore the above principles become the theoretical basis of defining theinflunce of Poissons ratio v on accuracy of the frozen-stress method.展开更多
<strong>Aim: </strong>To compare the type of stress distribution pattern occurring with anatomic and non-anatomic tooth forms beneath a complete denture in both maxillary and mandibular arch. <strong>...<strong>Aim: </strong>To compare the type of stress distribution pattern occurring with anatomic and non-anatomic tooth forms beneath a complete denture in both maxillary and mandibular arch. <strong>Methodology: </strong>A photoelastic model of the edentulous maxillary and mandibular ridge was prepared meticulously to simulate the human mandible and maxilla. Two sets of acrylic teeth with anatomic and non-anatomic occlusal forms were used to fabricate upper and lower dentures. A vertical static load of 100 N was applied through the mandibular model to the maxillary model. After load application on the dentures the photoelastic model as well as the upper and lower complete dentures were sectioned in the midline. The sectioned photoelastic model was viewed through a polariscope to observe the fringe pattern indicating varying amounts of stress distribution. In this study, a two-dimensional photoelastic stress analysis technique was utilized. <strong>Results:</strong> Force per unit area was observed more in anatomic teeth than the non-anatomic counterpart. Hence anatomic tooth forms may increase the possibility of bone resorption rate over a period of time. However, in non-anatomic lower teeth, a decrease in value was observed from posterior to anterior region. <strong>Conclusion: </strong>Stress of greater magnitude was observed with cuspal teeth whereas non-anatomic (0<span style="white-space:nowrap;">°</span>) showed slightly less magnitude of stress. Depending upon the clinical situation the clinician needs to choose the type of occlusal tooth forms for edentulous patients.展开更多
An investigation of the properties ofa LiNbO3 photoelastic waveguide via the acceleration-induced effect is presented. A novel three-component hybrid-integrated optical accelerometer based on a Mach-Zehnder interferom...An investigation of the properties ofa LiNbO3 photoelastic waveguide via the acceleration-induced effect is presented. A novel three-component hybrid-integrated optical accelerometer based on a Mach-Zehnder interferometer with a LiNbO3 photoelastic waveguide has been designed, which is capable of detecting seismic acceleration in high-accuracy seismic exploration. The Mach-Zehnder interferometer was successfully fabricated and a lighting test used to check its quality. The frequency response characteristic of the accelerometer was measured2 The accelerometer with a resonant frequency of 3549 Hz was demonstrated to show good linear frequency responding characteristics in the range of 100-3000 Hz. The accelerometer also shows good stability and consistency. Experimental results indicate that the outputs of the on- and cross-axis are 147 and 21.3 mV, respectively.展开更多
A new and effective method used to separate the transient principal stresses for dynamic photoelasticity is proposed. This is a hybrid method combining the optical method of dynamic caustics and the boundary element n...A new and effective method used to separate the transient principal stresses for dynamic photoelasticity is proposed. This is a hybrid method combining the optical method of dynamic caustics and the boundary element numerical method. Firstly, a modified Cranz-Schardin spark camera is used to record simultaneously the isochromatic fringe patterns of photoelasticity and the shadow spot patterns in the dynamic process. By means of the isochromatic fringe patterns, the difference between transient principal stresses in the whole domain and the principal stresses along the free boundary can be solved. In addition, the method of caustics is a very powerful technique for measuring the concentrative load. Then, the sum of the principal stresses is calculated by the boundary integral equation obtained from the Laplace integral transform of the wave equation. So, the transient principal stresses can be determined from the experimental and numerical results. As an example, the transient principal stresses in a polycarbonate disk under an impact load are resolved.展开更多
The quantitative characterization of the full-field stress and displacement is significant for analyzing the failure and instability of engineering materials.Various optical measurement techniques such as photoelastic...The quantitative characterization of the full-field stress and displacement is significant for analyzing the failure and instability of engineering materials.Various optical measurement techniques such as photoelasticity,moiréand digital image correlation methods have been developed to achieve this goal.However,these methods are difficult to incorporate to determine the stress and displacement fields simultaneously because the tested models must contain particles and grating for displacement measurement;however,these elements will disturb the light passing through the tested models using photoelasticity.In this study,by combining photoelasticity and the sampling moirémethod,we developed a method to determine the stress and displacement fields simultaneously in a three-dimensional(3D)-printed photoelastic model with orthogonal grating.Then,the full-field stress was determined by analyzing 10 photoelastic patterns,and the displacement fields were calculated using the sampling moirémethod.The results indicate that the developed method can simultaneously determine the stress and displacement fields.展开更多
In order to realize a high accuracy seismic exploration in the high electro-magnetic field and to improve oil producibility and recovery efficiency,a three-component photoelastic waveguide accelerometer is designed. B...In order to realize a high accuracy seismic exploration in the high electro-magnetic field and to improve oil producibility and recovery efficiency,a three-component photoelastic waveguide accelerometer is designed. Based on the photoelastic effect,the Mach-Zehnder integrated optical interferometer is designed to measure the three-orthogonal components of acceleration and the combined three-component simple harmonic vibrator is designed to reduce the cross-talk among the acceleration components. According to the variation of LiNbO3 waveguide phase under the action of the applied acceleration,the cross-axise sensitivity and transverse sensitivity ratio(TSR) were analysed. The results reveal that the accelerometer has wide band and good linearity. It can satisfy the sensor requirements of high accuracy seismic exploration. The main design parameters of the geophone system are:phase sensitivity:1.86×10-4 Rad·m-1·s-2,natural frequency:3 500 Hz,and the transverse sensitivity ratio:0.11%.展开更多
In this paper, by applying Lagrange, multiplier method and high order Lagrange multiplier method [1], we systematically derive coupled potential energy principle.coupled complementary energy principle,and generalized...In this paper, by applying Lagrange, multiplier method and high order Lagrange multiplier method [1], we systematically derive coupled potential energy principle.coupled complementary energy principle,and generalized coupled potential energy principles and generalized coupled complementary energy principles with two and three kinds of variables in photoelasticity.展开更多
The present paper is addressed to the finite element method combined with dynamic photoelastic analysis of propagating cracks, that is, on the basis of [1] by Chien Wei-zang, finite elements which incorporate the prop...The present paper is addressed to the finite element method combined with dynamic photoelastic analysis of propagating cracks, that is, on the basis of [1] by Chien Wei-zang, finite elements which incorporate the propagating crack-tip singularity intrinsic to two-dimensional elasticity are employed. THe relation between crack opening length and time step obtained from dynamic photoelaslie analysis is used as a definite condition for solving the dynamic equations and simulating the crack propagations as well As an example, the impact response of dynamie-bending-test specimen is investigated and the dynamic stress-intensity factor obtained from the mentioned finite element analysis and dynamic photoelasticity is in reasonable agreement with each other.展开更多
A simple photoelastic optical modulator with a Fabry-Perot cavity based on the silicon-on-insulator system was fabricated. A 50 % modulation depth has been obtained at current density of about 1. 5 x 103 A/cm2. The in...A simple photoelastic optical modulator with a Fabry-Perot cavity based on the silicon-on-insulator system was fabricated. A 50 % modulation depth has been obtained at current density of about 1. 5 x 103 A/cm2. The insertion loss was about 15 dB.展开更多
Euler’s rotation theorem and tensor rotation technique are applied to develop a generalized mathematical model for determining photoelastic constants in arbitrary orientation of cubic crystal system. Two times rotati...Euler’s rotation theorem and tensor rotation technique are applied to develop a generalized mathematical model for determining photoelastic constants in arbitrary orientation of cubic crystal system. Two times rotations are utilized in the model relating to crystallographic coordinates with Cartesian coordinates. The symmetry of photoelastic constants is found to have strong dependence with rotation angle. Using the model, one can determine photoelastic constants in any orientation by selecting appropriate rotation angle. The outcome of this study helps to characterize spatial variation of residual strain in crystalline as well as polycrystalline materials having cubic structure using the experimental technique known as scanning infrared polariscope.展开更多
The paper investigates the stress state at the bi-material interface crack-tip by the Photoelastic and Isopachic methods and the Finite Element Analysis (FEA). The principal stresses at the bi-material interface crack...The paper investigates the stress state at the bi-material interface crack-tip by the Photoelastic and Isopachic methods and the Finite Element Analysis (FEA). The principal stresses at the bi-material interface crack-tip are theoretically determined using the combination photoelastic and isopachic fringes. The size and the shape of crack-tip isochro-matic and isopachic fringes, at a bi-material interface under static load, are studied. When the crack-tip, which is perpendicular to interface, is placed at the interface of the bi-material, the isochromatic and the isopachic fringes depend on the properties of the two materials. Thus, the isochromatic and the isopachic fringes are divided into two branches, which present a jump of values at the interface. The size of the two branches mainly depends on the elastic modulus and the Poisson’s ratio of the two materials. From the combination of the isochromatic and the isopachic fringes, the principal stresses σ1 and σ2 can be estimated and the contour curves around the crack-tip can be plotted. For the FEA analysis, the program ANSYS 11.0 was used. The bi-material cracked plates were made from Lexan (BCBA) and Plexiglas (PMMA).展开更多
Recent progress in direct photodetection of light orbital angular momentum(OAM)based on the orbital photogalvanic effect(OPGE)provides an effective way for on-chip direct electric readout of orbital angular momentum,a...Recent progress in direct photodetection of light orbital angular momentum(OAM)based on the orbital photogalvanic effect(OPGE)provides an effective way for on-chip direct electric readout of orbital angular momentum,as well as large-scale integration focal-plane array devices.However,the recognition of OAM order from photocurrent response requires the extraction of circular polarization-dependent response.To date,the operation speed of such a detector is currently at the minute level and is limited by slow mechanical polarization modulation and low OAM recognition capability.We demonstrate that the operation speed can be greatly improved via an electrical polarization modulation strategy with a photoelastic modulator(PEM)accompanied by a phase-locked readout approach with a lock-in amplifier.We demonstrate an operation speed of up to kilohertz level with this new technology in the mid-infrared region(4μm)on an OAM detector using multilayer graphene as photosensitive material.In principle,with a new modulation and readout scheme,we can potentially increase the operation speed to megahertz with a PEM that operates at a state-ofthe-art speed.Our work paves the way toward high-speed operation of direct OAM detection devices based on the OPGE effect and pushes such technology to a more practical stage for focal plane array applications.展开更多
Epoxy resin is widely used in the support,insulation,and packaging components of electrical equipment owing to their excellent insulation,thermal,and mechanical properties.However,epoxy-resin insulation often suffers ...Epoxy resin is widely used in the support,insulation,and packaging components of electrical equipment owing to their excellent insulation,thermal,and mechanical properties.However,epoxy-resin insulation often suffers from thermal and mechanical stresses under extreme environmental conditions and a compact design,which can induce electrical tree degradation and insulation failure in electrical equipment.In this study,the photoelastic method is employed to investigate the thermal-mechanical coupling stress dependence of the electrical treeing behavior of epoxy resin.Typical electrical tree growth morphology and stress distribution were observed using the photoelastic method.The correlation between the tree length and overall accumulated damage with an increase in mechanical stress is determined.The results show that compressive stress retards the growth of electrical trees along the electric field,while tensile stress has accelerating effects.This proves that the presence of thermal stress can induce more severe accumulated damage.展开更多
In this paper,we present a method to expedite multi-wavelength photoelasticity for efficient stress analysis.By modulating two slightly different-wavelength illumination beams and simultaneously capturing dark-field a...In this paper,we present a method to expedite multi-wavelength photoelasticity for efficient stress analysis.By modulating two slightly different-wavelength illumination beams and simultaneously capturing dark-field and bright-field images,our approach acquires four essential polarized images.Spatial filtering of Fourier transforms streamlines inner stress computation,enabling multi-wavelength photoelasticity with a single detector exposure.Theoretical foundations are outlined,and proof-of-principle experiments validate the feasibility with a measurement error below 6.4%.The high measurement speed,determined by the detector’s frame rate,facilitates dynamic sample measurements at video frequency,offering promising advancements in material stress analysis.展开更多
By using the dynamic photoelastic method and our technique of fabricating an internal crack in solid , the scattered waves of incident grazing longitudinal ultrasonic wave pulse by a ribbon-type crack are ob-served an...By using the dynamic photoelastic method and our technique of fabricating an internal crack in solid , the scattered waves of incident grazing longitudinal ultrasonic wave pulse by a ribbon-type crack are ob-served and analyzed . In particular, the distribution of the intensity of the scattered head wave is measured quantitatively . The experimental results fairly agree with the theoretical ones given in ref. [ 1 ] .展开更多
基金Sponsored by Natural Science Foundation of Hebei Province(Grant No.E2019209153)Tangshan Science and Technology Program(Grant No.22130219G).
文摘The contact characteristics between cycloidal gear teeth and pinwheel teeth significantly impact the operational performance of cycloidal pinwheel mechanisms.Current research methods tend to rely primarily on theoretical calculations,with limited use of experimental methods for detecting dynamic contact properties.We propose a novel method for testing the dynamic contact characteristics of cycloidal pinwheel mechanisms.By combining Hertzian contact theory and contact strength theory,we establish a force and meshing stiffness model for the cycloidal and pinwheel gears,and determine the maximum contact stress and variations in pinwheel gear force and meshing stiffness.Based on the principle of photoelasticity,we built a testing platform for the cycloidal pinwheel mechanism to assess its contact characteristics.This platform provides the stress distribution of the cycloidal pinwheel mechanism and allows us to deduce key parameters such as the number of meshing teeth and the meshing interval.This study provides an experimental method for investigating the contact characteristics of cycloidal pinwheel mechanisms.
基金Project supported by the National Key R&D Program of China(No.2018YFF01014200)the National Natural Science Foundation of China(Nos.11727804,11872240,12072184,12002197,and 51732008)the China Postdoctoral Science Foundation(Nos.2020M671070 and 2021M692025)。
文摘Stress separation is usually achieved by solving differential equations of equilibrium after parameter determination from isochromatics and isoclinics.The numerical error resulting from the stress determination is a main concern as it is always a function of parameters in discretization.To improve the accuracy of stress calculation,a novel meshless barycentric rational interpolation collocation method(BRICM)is proposed.The derivatives of the shear stress on the calculation path are determined by using the differential matrix which converts the differential form of the equations of equilibrium into a series of algebraic equations.The advantage of the proposed method is that the auxiliary lines,grids,and error accumulation which are commonly used in traditional shear difference methods(SDMs)are not required.Simulation and experimental results indicate that the proposed meshless method is able to provide high computational accuracy in the full-field stress determination.
文摘Objective: To compare the biomechanical basis of 3 different internal fixation methods: nitinol patellar concentrator (NT-PC), tension band and wire circle in treating patellar fractures. Methods: The epoxy resin three dimensional photoelasticity patellar models were made by precise moulding, and were fixated by nitinol patellar concentrator (NT-PC), tension band and wire circle respectively. The patellar models with frozen stress stripes were put into the polarized light field and the stress distributions were compared. As for the model fixated by NT-PC, by dividing layer, photographing and tracing, we used the iterative method to calculate the stress value of every internal node of the epoxy resin patellar model, and the character of stress was analyzed. Results: An overall stress field was yielded when the patellar model was fixated by NT-PC, and the stripes were more than that of tension band model and wire circle model, which have only few stress stripes in the fixated layers. Further analysis indicated that there were continuous fixated stresses in the facies articularis and distal pole of patella, and the character of stresses produced by NT-PC were mainly in longitudinal direction, then in transverse direction. The shearing stresses were small. Conclusion: The initiative and continuous memorial stress of NT-PC and its overall stress distribution character are the essence of NT-PC distinguished with tension band and wire circle in treating patellar fractures. The stress character produced by NT-PC is good for the stability of fracture site and prompts fracture healing.
文摘Objective: To analyze the biomechanical elements of Nitinol Patellar Concentrator (NT-PC) in heating commi nuted patellar fractures. Methods: The epoxy resin three dimensional photoelasticity pobal model was loaded with Nitinol Patellar Connector and frozen. After dividing layer, photographing and tracing, iterative method was used to calculate the stress value of every tuteed node. Rasults: Stress values of 1 262 nodes scattered in 12 layers were obtained The stress distribution indicated that an overall stress field was yield when the NT-PC fixated the patellar model, and there existed fixative stress in the facies articularis and distal pole of the patellar model. Conclusion: The NT-PC has evident therapeutic effect for the comminuted patellar fractures. The existing stress is helpful in maintaining anatomical reduction and enhancing fracture healing.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11374325 and 11427809
文摘The dynamic photoelastic technique is employed to visualize and quantify the propagation properties of backward Lamb waves in a plate. Higher energy leakage of second-order symmetric backward wave mode S2b in contrast to third-order anti-symmetric backward mode A3b is shown by the dispersion curve of a plate immersed in water, and then verified by experiments. To avoid the considerable high leakage, the plate is placed in air, both group and phase velocities of modes S2b and A3b in the glass plate are experimentally measured. In comparison with the theoretical values, less than 5% errors are found in experiments.
文摘This paper presents an energy principle, zero different principle of coupledsystems in photoelasticity, from which the potential energy, the complementary energy,generalized potential energy and generalized complementary energy variationalprinciples of the coupled systems in photoelasticity are derived What is called the coupled systems means that two deformational bodies, forwhich figures, sizes,loads and boundary conditions are the same and they are all inactual states but they are made of different materials.Prototype body and model body in photoelasticity are essentially the coupledsystems, therefore the above principles become the theoretical basis of defining theinflunce of Poissons ratio v on accuracy of the frozen-stress method.
文摘<strong>Aim: </strong>To compare the type of stress distribution pattern occurring with anatomic and non-anatomic tooth forms beneath a complete denture in both maxillary and mandibular arch. <strong>Methodology: </strong>A photoelastic model of the edentulous maxillary and mandibular ridge was prepared meticulously to simulate the human mandible and maxilla. Two sets of acrylic teeth with anatomic and non-anatomic occlusal forms were used to fabricate upper and lower dentures. A vertical static load of 100 N was applied through the mandibular model to the maxillary model. After load application on the dentures the photoelastic model as well as the upper and lower complete dentures were sectioned in the midline. The sectioned photoelastic model was viewed through a polariscope to observe the fringe pattern indicating varying amounts of stress distribution. In this study, a two-dimensional photoelastic stress analysis technique was utilized. <strong>Results:</strong> Force per unit area was observed more in anatomic teeth than the non-anatomic counterpart. Hence anatomic tooth forms may increase the possibility of bone resorption rate over a period of time. However, in non-anatomic lower teeth, a decrease in value was observed from posterior to anterior region. <strong>Conclusion: </strong>Stress of greater magnitude was observed with cuspal teeth whereas non-anatomic (0<span style="white-space:nowrap;">°</span>) showed slightly less magnitude of stress. Depending upon the clinical situation the clinician needs to choose the type of occlusal tooth forms for edentulous patients.
基金supported by the National Natural Science Foundation of China (No. 40774067)the Applied Basic Research Program of Sichuan Province, China (No. 07JY029-135)
文摘An investigation of the properties ofa LiNbO3 photoelastic waveguide via the acceleration-induced effect is presented. A novel three-component hybrid-integrated optical accelerometer based on a Mach-Zehnder interferometer with a LiNbO3 photoelastic waveguide has been designed, which is capable of detecting seismic acceleration in high-accuracy seismic exploration. The Mach-Zehnder interferometer was successfully fabricated and a lighting test used to check its quality. The frequency response characteristic of the accelerometer was measured2 The accelerometer with a resonant frequency of 3549 Hz was demonstrated to show good linear frequency responding characteristics in the range of 100-3000 Hz. The accelerometer also shows good stability and consistency. Experimental results indicate that the outputs of the on- and cross-axis are 147 and 21.3 mV, respectively.
基金Concurrently published in the Chinese Edition of Acta Mechanica Sinica, Vol, 26, No.1, 1994
文摘A new and effective method used to separate the transient principal stresses for dynamic photoelasticity is proposed. This is a hybrid method combining the optical method of dynamic caustics and the boundary element numerical method. Firstly, a modified Cranz-Schardin spark camera is used to record simultaneously the isochromatic fringe patterns of photoelasticity and the shadow spot patterns in the dynamic process. By means of the isochromatic fringe patterns, the difference between transient principal stresses in the whole domain and the principal stresses along the free boundary can be solved. In addition, the method of caustics is a very powerful technique for measuring the concentrative load. Then, the sum of the principal stresses is calculated by the boundary integral equation obtained from the Laplace integral transform of the wave equation. So, the transient principal stresses can be determined from the experimental and numerical results. As an example, the transient principal stresses in a polycarbonate disk under an impact load are resolved.
基金financial support from the National Natural Science Foundation of China(Nos.52004137,52121003,51727807,12032013 and 11972209)Fundamental Research Funds for the Central Universities(No.2022XJAQ01)。
文摘The quantitative characterization of the full-field stress and displacement is significant for analyzing the failure and instability of engineering materials.Various optical measurement techniques such as photoelasticity,moiréand digital image correlation methods have been developed to achieve this goal.However,these methods are difficult to incorporate to determine the stress and displacement fields simultaneously because the tested models must contain particles and grating for displacement measurement;however,these elements will disturb the light passing through the tested models using photoelasticity.In this study,by combining photoelasticity and the sampling moirémethod,we developed a method to determine the stress and displacement fields simultaneously in a three-dimensional(3D)-printed photoelastic model with orthogonal grating.Then,the full-field stress was determined by analyzing 10 photoelastic patterns,and the displacement fields were calculated using the sampling moirémethod.The results indicate that the developed method can simultaneously determine the stress and displacement fields.
基金The National Natural Science Foundation of China(40774067)The Program of International Cooperation and Exchange in National Natural Science Foundation of China(40811240167)The Program of the Key Science and Technology of Sichuan(07JY029-135)
文摘In order to realize a high accuracy seismic exploration in the high electro-magnetic field and to improve oil producibility and recovery efficiency,a three-component photoelastic waveguide accelerometer is designed. Based on the photoelastic effect,the Mach-Zehnder integrated optical interferometer is designed to measure the three-orthogonal components of acceleration and the combined three-component simple harmonic vibrator is designed to reduce the cross-talk among the acceleration components. According to the variation of LiNbO3 waveguide phase under the action of the applied acceleration,the cross-axise sensitivity and transverse sensitivity ratio(TSR) were analysed. The results reveal that the accelerometer has wide band and good linearity. It can satisfy the sensor requirements of high accuracy seismic exploration. The main design parameters of the geophone system are:phase sensitivity:1.86×10-4 Rad·m-1·s-2,natural frequency:3 500 Hz,and the transverse sensitivity ratio:0.11%.
文摘In this paper, by applying Lagrange, multiplier method and high order Lagrange multiplier method [1], we systematically derive coupled potential energy principle.coupled complementary energy principle,and generalized coupled potential energy principles and generalized coupled complementary energy principles with two and three kinds of variables in photoelasticity.
文摘The present paper is addressed to the finite element method combined with dynamic photoelastic analysis of propagating cracks, that is, on the basis of [1] by Chien Wei-zang, finite elements which incorporate the propagating crack-tip singularity intrinsic to two-dimensional elasticity are employed. THe relation between crack opening length and time step obtained from dynamic photoelaslie analysis is used as a definite condition for solving the dynamic equations and simulating the crack propagations as well As an example, the impact response of dynamie-bending-test specimen is investigated and the dynamic stress-intensity factor obtained from the mentioned finite element analysis and dynamic photoelasticity is in reasonable agreement with each other.
文摘A simple photoelastic optical modulator with a Fabry-Perot cavity based on the silicon-on-insulator system was fabricated. A 50 % modulation depth has been obtained at current density of about 1. 5 x 103 A/cm2. The insertion loss was about 15 dB.
文摘Euler’s rotation theorem and tensor rotation technique are applied to develop a generalized mathematical model for determining photoelastic constants in arbitrary orientation of cubic crystal system. Two times rotations are utilized in the model relating to crystallographic coordinates with Cartesian coordinates. The symmetry of photoelastic constants is found to have strong dependence with rotation angle. Using the model, one can determine photoelastic constants in any orientation by selecting appropriate rotation angle. The outcome of this study helps to characterize spatial variation of residual strain in crystalline as well as polycrystalline materials having cubic structure using the experimental technique known as scanning infrared polariscope.
文摘The paper investigates the stress state at the bi-material interface crack-tip by the Photoelastic and Isopachic methods and the Finite Element Analysis (FEA). The principal stresses at the bi-material interface crack-tip are theoretically determined using the combination photoelastic and isopachic fringes. The size and the shape of crack-tip isochro-matic and isopachic fringes, at a bi-material interface under static load, are studied. When the crack-tip, which is perpendicular to interface, is placed at the interface of the bi-material, the isochromatic and the isopachic fringes depend on the properties of the two materials. Thus, the isochromatic and the isopachic fringes are divided into two branches, which present a jump of values at the interface. The size of the two branches mainly depends on the elastic modulus and the Poisson’s ratio of the two materials. From the combination of the isochromatic and the isopachic fringes, the principal stresses σ1 and σ2 can be estimated and the contour curves around the crack-tip can be plotted. For the FEA analysis, the program ANSYS 11.0 was used. The bi-material cracked plates were made from Lexan (BCBA) and Plexiglas (PMMA).
基金supported by the National Natural Science Foundation of China(Grant Nos.62250065,62325401,12404389,12034001,12034003,and 62227822)the National Key Research and Development Program of China(Grant Nos.2021YFA1400100 and 2020YFA0308800)+1 种基金the Natural Science Basic Research Program of Shaanxi(Grant No.2024JC-YBQN-0063)the Open Fund of the State Key Laboratory of Infra-red Physics(Grant No.SITP-NLIST-ZD-2023-02)。
文摘Recent progress in direct photodetection of light orbital angular momentum(OAM)based on the orbital photogalvanic effect(OPGE)provides an effective way for on-chip direct electric readout of orbital angular momentum,as well as large-scale integration focal-plane array devices.However,the recognition of OAM order from photocurrent response requires the extraction of circular polarization-dependent response.To date,the operation speed of such a detector is currently at the minute level and is limited by slow mechanical polarization modulation and low OAM recognition capability.We demonstrate that the operation speed can be greatly improved via an electrical polarization modulation strategy with a photoelastic modulator(PEM)accompanied by a phase-locked readout approach with a lock-in amplifier.We demonstrate an operation speed of up to kilohertz level with this new technology in the mid-infrared region(4μm)on an OAM detector using multilayer graphene as photosensitive material.In principle,with a new modulation and readout scheme,we can potentially increase the operation speed to megahertz with a PEM that operates at a state-ofthe-art speed.Our work paves the way toward high-speed operation of direct OAM detection devices based on the OPGE effect and pushes such technology to a more practical stage for focal plane array applications.
基金Supported by the National Natural Science Foundation of China(52377153)and Science and Technology Project of Hebei Education Department(QN2023073).
文摘Epoxy resin is widely used in the support,insulation,and packaging components of electrical equipment owing to their excellent insulation,thermal,and mechanical properties.However,epoxy-resin insulation often suffers from thermal and mechanical stresses under extreme environmental conditions and a compact design,which can induce electrical tree degradation and insulation failure in electrical equipment.In this study,the photoelastic method is employed to investigate the thermal-mechanical coupling stress dependence of the electrical treeing behavior of epoxy resin.Typical electrical tree growth morphology and stress distribution were observed using the photoelastic method.The correlation between the tree length and overall accumulated damage with an increase in mechanical stress is determined.The results show that compressive stress retards the growth of electrical trees along the electric field,while tensile stress has accelerating effects.This proves that the presence of thermal stress can induce more severe accumulated damage.
基金supported by the National Natural Science Foundation of China(Nos.62205126 and 62305133)the Wuxi Science and Technology Development Fund Project(No.K20221016)+1 种基金the Fundamental Research Funds for the Central Universities(No.JUSRP123028)the Project of the Ministry of Industry and Information Technology of the People’s Republic of China(No.TC220H05L).
文摘In this paper,we present a method to expedite multi-wavelength photoelasticity for efficient stress analysis.By modulating two slightly different-wavelength illumination beams and simultaneously capturing dark-field and bright-field images,our approach acquires four essential polarized images.Spatial filtering of Fourier transforms streamlines inner stress computation,enabling multi-wavelength photoelasticity with a single detector exposure.Theoretical foundations are outlined,and proof-of-principle experiments validate the feasibility with a measurement error below 6.4%.The high measurement speed,determined by the detector’s frame rate,facilitates dynamic sample measurements at video frequency,offering promising advancements in material stress analysis.
文摘By using the dynamic photoelastic method and our technique of fabricating an internal crack in solid , the scattered waves of incident grazing longitudinal ultrasonic wave pulse by a ribbon-type crack are ob-served and analyzed . In particular, the distribution of the intensity of the scattered head wave is measured quantitatively . The experimental results fairly agree with the theoretical ones given in ref. [ 1 ] .
