In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar perce...In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.展开更多
The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor ...The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor featuring a broad spectral absorption range,is successfully employed as the electron acceptor to combine with CdS for constructing a S-scheme heterojunction.The optimized photocatalyst(CdSCuO2∶1)delivers an exceptional hydrogen evolution rate of 18.89 mmol/(g·h),4.15-fold higher compared with bare CdS.X-ray photoelectron spectroscopy(XPS)and ultraviolet-visible diffuse reflection absorption spectroscopy(UV-vis DRS)confirmed the S-scheme band structure of the composites.Moreover,the surface photovoltage(SPV)and electron paramagnetic resonance(EPR)indicated that the photogenerated electrons and photogenerated holes of CdS-CuO2∶1 were respectively transferred to the conduction band(CB)of CdS with a higher reduction potential and the valence band(VB)of CuO with a higher oxidation potential under illumination,as expected for the S-scheme mechanism.Density-functional-theory calculations of the electron density difference(EDD)disclose an interfacial electric field oriented from CdS to CuO.This built-in field suppresses charge recombination and accelerates carrier migration,rationalizing the markedly enhanced PHE activity.This study offers a novel strategy for designing S-scheme heterojunctions with high light harvesting and charge utilization toward sustainable solar-tohydrogen conversion.展开更多
Atomic surfaces are strictly required by high-performance devices of diamond.Nevertheless,diamond is the hardest material in nature,leading to the low material removal rate(MRR)and high surface roughness during machin...Atomic surfaces are strictly required by high-performance devices of diamond.Nevertheless,diamond is the hardest material in nature,leading to the low material removal rate(MRR)and high surface roughness during machining.Noxious slurries are widely used in conventional chemical mechanical polishing(CMP),resulting in the possible pollution to the environment.Moreover,the traditional slurries normally contain more than four ingredients,causing difficulties to control the process and quality of CMP.To solve these challenges,a novel green CMP for single crystal diamond was developed,consisting of only hydrogen peroxide,diamond abrasive and Prussian blue(PB)/titania catalyst.After CMP,atomic surface is achieved with surface roughness Sa of 0.079 nm,and the MRR is 1168 nm·h^(-1).Thickness of damaged layer is merely 0.66 nm confirmed by transmission electron microscopy(TEM).X-ray photoelectron spectroscopy,electron paramagnetic resonance and TEM reveal that·OH radicals form under ultraviolet irradiation on PB/titania catalyst.The·OH radicals oxidize diamond,transforming it from monocrystalline to amorphous atomic structure,generating a soft amorphous layer.This contributes the high MRR and formation of atomic surface on diamond.The developed novel green CMP offers new insights to achieve atomic surface of diamond for potential use in their high-performance devices.展开更多
Solar-driven photocatalytic hydrogen production via water splitting is considered as one of the most promising green and sustainable strategies,with the potential to replace traditional fossil fuels[1,2].Generally,thi...Solar-driven photocatalytic hydrogen production via water splitting is considered as one of the most promising green and sustainable strategies,with the potential to replace traditional fossil fuels[1,2].Generally,this photocatalytic reaction process includes the following steps:First,the semiconductor photocatalyst is photoexcited to generate photoinduced excitons on a femtosecond timescale.Next,the photoinduced excitons are separated into photogenerated electrons and holes,occurring within a femtosecond to picosecond timescale.Subsequently,only a small fraction of the photogenerated electrons and holes can overcome kinetic barriers,such as phonon scattering and bulk defects,to migrate to the surface。展开更多
Although organic photovoltaic nanoparticles(OPV-NPs)have demonstrated great potential for achieving high-performance photocatalytic hydrogen evolution,the long-term stability still faces insurmountable challenges.To a...Although organic photovoltaic nanoparticles(OPV-NPs)have demonstrated great potential for achieving high-performance photocatalytic hydrogen evolution,the long-term stability still faces insurmountable challenges.To address these issues,the all-polymer strategy is adopted for the first time by using polymeric donor PM6 and acceptor ZC-1 to construct heterojunction OPV-NPs.Compared to its monomer of CH-1,ZC-1 shows a smaller exciton binding energy and reorganization energy,a better interpenetrating donor-acceptor network,more efficient charge transfer,etc.As a result,PM6:ZC-1-based OPV-NPs achieve an impressive hydrogen evolution rate(HER)of 145.1 mmol g^(-1)h^(-1)under simulated sunlight irradiation,much better than 6.7 mmol g^(-1)h^(-1)for PM6:CH-1.More excitingly,PM6:ZC-1-based OPVNPs exhibit a significantly improved operational durability of~97%during a 32-hour cyclic stability evaluation compared to only~30%for PM6:CH-1,which should be attributed to the markedly limited molecular diffusion in OPV-NPs.Our findings firstly underscore the effectiveness in improving the continuous operational stability of OPV-NPs by adopting an all-polymer methodology.展开更多
The defect regulation and p-n heterojunction of composites have gained significant attention due to their potential applications.Nitrogen(N)as doping heteroatoms and perylene-3,4,9,10-tetracarboximide(PDINH)as an appr...The defect regulation and p-n heterojunction of composites have gained significant attention due to their potential applications.Nitrogen(N)as doping heteroatoms and perylene-3,4,9,10-tetracarboximide(PDINH)as an appropriate n-type semiconductor were innovatively and reasonably selected to enhance the photocatalytic performance of pristine p-type cuprous oxide(Cu_(2)O).In this study,the defect regula-tion of N doping(1)achieved the small-size effect of Cu_(2)O,(2)optimized the electron features,and(3)improved the kinetics of reactive oxygen species.The p-n heterojunction with PDINH was developed to sharply improve the light utilization of Cu_(2)O,from the UV region to the near-infrared region.As expected,the optimized Cu_(2)N_(x)O_(1–x)/PDINH(x=0.02)exhibited excellent long-term photocatalytic antibacterial ac-tivities,with antibacterial rates exceeding 91%against Staphylococcus aureus and Pseudomonas aeruginosa.Defect regulation and p-n heterojunction of Cu_(2)O-based composites thus provide a great deal of potential for future advancements in photocatalysis.展开更多
The rapid recombination of photogenerated carriers poses a significant limitation on the use of CdS quantum dots(QDs)in photocatalysis.Herein,the construction of a novel S-scheme heterojunction between cubic-phase CdS...The rapid recombination of photogenerated carriers poses a significant limitation on the use of CdS quantum dots(QDs)in photocatalysis.Herein,the construction of a novel S-scheme heterojunction between cubic-phase CdS QDs and hollow nanotube In_(2)O_(3)is successfully achieved using an electrostatic self-assembly method.Under visible light irradiation,all CdS-In_(2)O_(3)composites exhibit higher hydrogen evolution efficiency compared to pure CdS QDs.Notably,the photocatalytic H_(2)evolution rate of the optimal CdS-7%In_(2)O_(3)composite is determined to be 2258.59μmol g^(−1)h^(−1),approximately 12.3 times higher than that of pure CdS.The cyclic test indicates that the CdS-In_(2)O_(3)composite maintains considerable activity even after 5 cycles,indicating its excellent stability.In situ X-ray photoelectron spectroscopy and density functional theory calculations confirm that carrier migration in CdS-In_(2)O_(3)composites adheres to a typical S-scheme heterojunction mechanism.Additionally,a series of characterizations demonstrate that the formation of S-scheme heterojunctions between In_(2)O_(3)and CdS inhibits charge recombination and accelerates the separation and migration of photogenerated carriers in the CdS QDs,thus achieving enhanced photocatalytic performance.This work elucidates the pivotal role of S-scheme heterojunctions in photocatalytic H_(2)production and offers novel insights into the construction of effective composite photocatalysts.展开更多
Small-sized Cd_(x) Zn_(1-x) S solid solution nanomaterial is an important candidate for efficient photocatalytic hydrogen evolution(PHE),but it still suffers from easy agglomeration,severe photo corrosion,and fast pho...Small-sized Cd_(x) Zn_(1-x) S solid solution nanomaterial is an important candidate for efficient photocatalytic hydrogen evolution(PHE),but it still suffers from easy agglomeration,severe photo corrosion,and fast photogenerated electron-hole recombination.To tackle these issues,herein,we propose a new strategy to modify Cd_(x) Zn_(1-x) S nanoreactors by the simultaneous utilization of ionic-liquid-assisted morphology engineering and MXene-incorporating method.That is,we designed and synthesized a novel hierarchi-cal Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction composite through the in-situ deposition of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets on unique IL-modified Ti_(3) C_(2) MXenes by a one-pot solvothermal method for efficiently PHE.The unique construction strategy tailors the thickness of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets and prevents them from stacking and agglomeration,and especially,optimizes their charge transfer pathways during the photocatalytic process.Compared with pristine Cd_(0.8) Zn_(0.2) S nanosheets,Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) has abun-dant photogenerated electrons available on the Ti_(3) C_(2) surface for proton reduction reaction,owing to the absence of deep-trapped electrons,suppression of electron-hole recombination in Cd_(0.8) Zn_(0.2) S and high-efficiency charge separation at the Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction interface.Moreover,the hy-drophilicity,electrical conductivity,visible-light absorption capacity,and surficial hydrogen desorption of Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) heterostructure are significantly improved.As a result,the heterostructure exhibits out-standing photocatalytic stability and super high apparent quantum efficiency,being rendered as one of the best noble-metal-free Cd-Zn-S-based photocatalysts.This work illustrates the mechanisms of mor-phology control and heterojunction construction in controlling the catalytic behavior of photocatalysts and highlights the great potential of the IL-assisted route in the synthesis of high-performance MXene-based heterostructures for photocatalytic hydrogen evolution.展开更多
A sp^(2) carbon-conjugated covalent organic framework (BDATN) was modified through γ-ray radiation reduction and subsequent acidification with hydrochloric acid to yield a novel functional COF (named rBDATN-HCl) for ...A sp^(2) carbon-conjugated covalent organic framework (BDATN) was modified through γ-ray radiation reduction and subsequent acidification with hydrochloric acid to yield a novel functional COF (named rBDATN-HCl) for Cr(Ⅵ) removal.The morphology and structure of rBDATN-HCl were analyzed and identified by SEM,FTIR,XRD and solid-state13C NMR.It is found that the active functional groups,such as hydroxyl and amide,were introduced into BDATN after radiation reduction and acidification.The prepared rBDATN-HCl demonstrates a photocatalytic reduction removal rate of Cr(Ⅵ) above 99%after 60min of illumination with a solid-liquid ratio of 0.5 mg/mL,showing outstanding performance,which is attributed to the increase of dispersibility and adsorption sites of r BDATN-HCl.In comparison to the cBDATN-HCl synthesized with chemical reduction,rBDATN-HCl exhibits a better photoreduction performance for Cr(Ⅵ),demonstrating the advantages of radiation preparation of rBDATN-HCl.It is expected that more functionalized sp^(2) carbon-conjugated COFs could be obtained by this radiation-induced reduction strategy.展开更多
Photocatalysis provides a promising solution to the worldwide shortages of energy and industrially important raw materials by utilizing sunlight for coupled hydrogen(H_(2))production with controllable organic transfor...Photocatalysis provides a promising solution to the worldwide shortages of energy and industrially important raw materials by utilizing sunlight for coupled hydrogen(H_(2))production with controllable organic transformation.Herein,we demonstrate that PtFeNiCoCu high-entropy alloy(HEA)nanocrystals can act as efficient cocatalysts for H_(2)evolution coupled with selective oxidation of cinnamyl alcohol to cinnamaldehyde by cubic cadmium sulfide(CdS)quantum dots(QDs)with uniform sizes of 4.0±0.5 nm.HEA nanocrystals were prepared via a simple solvothermal approach,and were successfully integrated with CdS QDs by an electrostatic self-assembly method to construct HEA/CdS composites.The optimized HEA/CdS sample presented an enhanced photocatalytic H_(2)production rate of 7.15 mmol g^(-1)h^(-1),which was 13 times that of pure CdS QDs.Moreover,a cinnamyl alcohol conversion of 96.2%with cinnamaldehyde selectivity of 99.5%was achieved after photoreaction for 3 h.The integration of HEA with CdS QDs extended the optical absorption edge from 475 to 484 nm.From d-band center analysis,Pt atoms in the HEA are the active sites for H_(2)evolution,exhibiting higher catalytic activity than pure Pt.Meanwhile,the band structure of the CdS QDs enables the oxidative transformation of cinnamyl alcohol to cinnamaldehyde with high selectivity.Moreover,femtosecond transient absorption spectroscopy shows that HEA can significantly promote the separation of photogenerated carriers in CdS,which is vital for achieving enhanced photocatalytic activity.This work inspires atomic-level design of photocatalytic materials for coordinated production of green energy carriers and value-added products.展开更多
The issues of fossil energy shortage and environmental pollution caused by the excessive consumption of conventional fossil fuels necessitates the exploration of renewable and clean energy sources such as hydrogen,whi...The issues of fossil energy shortage and environmental pollution caused by the excessive consumption of conventional fossil fuels necessitates the exploration of renewable and clean energy sources such as hydrogen,which is viable alternative to traditional energy sources in view of its high energy density and nonpolluting nature.In this regard,photocatalytic technology powered by inexhaustible solar energy is an ideal hydrogen production method.The recently developed copper-and zinc-based multinary metal sulfide(MMS)semiconductor photocatalysts exhibit the advantages of suitable bandgap,wide light-harvesting range,and flexible elemental composition,thus possessing great potential for achieving considerable photocatalytic hydrogen evolution(PHE)performance.Despite great progress has been achieved,the current photocatalysts still cannot meet the commercial application demands,which highlights the mechanisms understanding and optimization strategies for efficient PHE.Herein,the basic mechanisms of PHE,and effective optimization strategies are firstly introduced.Afterwards,the research process and the performance of copper-and zinc-based MMS photocatalysts,are thoroughly reviewed.Finally,the unresolved issues,and challenges hindering the achievement of overall water splitting have been discussed.展开更多
Halide perovskite-based heterojunctions have emerged as promising candidates for solar energy conversion and storage due to their unique photophysical properties.However,the current bottleneck lies in the insufficient...Halide perovskite-based heterojunctions have emerged as promising candidates for solar energy conversion and storage due to their unique photophysical properties.However,the current bottleneck lies in the insufficient separation of photogenerated carriers at the interface,primarily due to challenges in the controllable growth of perovskite on the substrate.Herein,we present a growth strategy for depositing lead-free Cs_(3)Sb_(2)Br_(9)perovskite nanocrystals onto the surface of Co_(3)O_(4)with the assistance of polyacrylic acid(PAA),generating a step-scheme(S-scheme)heterojunction denoted as Co_(3)O_(4)-Cs_(3)Sb_(2)Br_(9).The utilization of PAA as a template can effectively regulate the nucleation and growth of Cs_(3)Sb_(2)Br_(9),thereby significantly enhancing the charge separation efficiency of the Co_(3)O_(4)-Cs_(3)Sb_(2)Br_(9)heterojunction compared to its counterpart formed without PAA assistance.Under simulated solar light irradiation(100 mW·cm^(-2)),the cerium-doped Co_(3)O_(4)-Cs_(3)Sb_(2)Br_(9)heterojunction exhibits excellent photocatalytic CO_(2)reduction activity without the need for any sacrificial agent.Specifically,the CO yield reaches up to 700.7μmol·g^(-1)·h^(-1),marking a 2.8-fold increase over the sample synthesized without PAA mediation.This polymer-assisted in-situ growth strategy should open up a new avenue for designing and developing more efficient photocatalytic materials based on halide perovskites.展开更多
Photocatalytic hydrogen production technology is an ideal approach to addressing energy and environmental issues,with efficient charge transfer being the key to achieving high-performance hydrogen production.Ultra-thi...Photocatalytic hydrogen production technology is an ideal approach to addressing energy and environmental issues,with efficient charge transfer being the key to achieving high-performance hydrogen production.Ultra-thin CuInS_(2)nanosheets were prepared through a solvothermal method.Subsequently,metallic Ni was surface-modified onto CuInS_(2)through photo-deposition to serve as a co-catalyst.The optimized photocatalyst exhibited a hydrogen production rate of 15.5 mmol·g^(-1)·h^(-1)in water when used an ascorbic acid as hole scavenger,which is 9 times that of the original CuInS_(2).Transient absorption spectra(TAS)analysis demonstrates that the hole transfer from CuInS_(2)nanosheets to ascorbic acid,yielding a long-lived electron with a lifetime of 45.6μs.The electrons in CuInS_(2)are efficiently captured by Ni as active sites for driving hydrogen evolution.In situ TAS further indicates that ascorbic acid and Ni sites synergistically promote the electron transfer dynamics of CuInS_(2),achieving an electron transfer efficiency of 48.4%.This work provides a viable strategy for designing highly efficient photocatalysts with enhanced charge transfer.展开更多
S-scheme heterojunctions have gained widespread application in photocatalytic reactions due to their dis-tinctive carrier transport mechanism and remarkable redox capabilities.However,a significant challenge persists ...S-scheme heterojunctions have gained widespread application in photocatalytic reactions due to their dis-tinctive carrier transport mechanism and remarkable redox capabilities.However,a significant challenge persists in extending carrier lifetimes while simultaneously enhancing light absorption,both of which are essential for optimizing photocatalytic activity.Herein,we report the solvothermal synthesis of ul-trathin CdS nanosheets grown in situ on two-dimensional(2D)Ni-MOF to construct 2D/2D S-scheme heterojunctions.Comprehensive characterizations reveal that the incorporation of Ni-MOF(metal-organic framework)with ligand-to-metal charge transfer(LMCT)states not only broadens optical absorption but also significantly prolongs carrier lifetimes.This synergistic enhancement,coupled with the S-scheme charge transport mechanism,enables the composite to function as a bifunctional catalyst for photocat-alytic hydrogen production and simultaneous benzylamine coupling.The optimal system demonstrates an impressive hydrogen evolution rate of 8.5 mmol g^(-1) h^(-1) and an N-benzylidenebenzylamine yield of 4.6 mmol g^(-1) h^(-1) without requiring a cocatalyst.This work underscores the potential of integrating MOFs with LMCT states into S-scheme heterojunctions to enhance interfacial charge transfer,offering valuable insights for the design of S-scheme heterojunctions for artificial photosynthesis and related fields.展开更多
Bacterial contamination and marine biofouling are directly or indirectly impacting the economy,environment,and human health worldwide.Photocatalytic sterilization and antifouling technology is an effective method to p...Bacterial contamination and marine biofouling are directly or indirectly impacting the economy,environment,and human health worldwide.Photocatalytic sterilization and antifouling technology is an effective method to prevent microbial contamination and corrosion.Due to its eco-friendly nature,broad-spectrum bactericidal properties,and high efficiency,this method has recently received much attention.In this review,we have comprehensively discussed the photoinduced charge carriers transfer,main reactive oxygen species(ROS),the interactions among photocatalysts and microorganisms,as well as various antibacterial mechanisms such as oxidative stress,physical/mechanical destruction,photothermal effect,piezoelectric field effect,and triboelectric field.Different types of semiconductors,including TiO_(2),ZnO,CeO_(2),Cu-based semiconductors,Bi-based semiconductors,Ag-based semiconductors,g-C_(3)N_(4),MOF,and containing phosphorus photocatalysts are summarized in photocatalytic sterilization and antifouling activity.Besides,various improvement methods including morphological control,crystallizing,doping engineering,loading cocatalyst,and constructing heterojunction are discussed.Furthermore,a strategy for dramatically improving practice applications is proposed for the possibility of further antifouling applications.Challenges and prospects for the photocatalytic sterilization and antifouling method are also discussed to highlight design considerations.展开更多
The difficulty in fabricating a multifaceted composite heterojunction system based on Cd_(x) Zn_(1-x) S limits the enhancement of photocatalytic performance.In the present scrutiny,novel ZnO/Cd_(x) Zn_(1-x) S/CdS com-...The difficulty in fabricating a multifaceted composite heterojunction system based on Cd_(x) Zn_(1-x) S limits the enhancement of photocatalytic performance.In the present scrutiny,novel ZnO/Cd_(x) Zn_(1-x) S/CdS com-posite heterojunctions are successfully prepared by the alkaline dissolution etching method.The internal electric field at the interface of I-type and Z-scheme heterojunction improved the effective charge sepa-ration.The ZC 8 sample exhibits excellent photocatalytic performance and the H2 production efficiency is 15.67 mmol g^(−1) h^(−1) with good stability up to 82.9%in 24-hour cycles.The performance of CH_(4) and CO capacity in the CO_(2) RR process is 3.47μmol g^(−1) h^(−1) and 23.5μmol g^(−1) h^(−1),respectively.The photogener-ated accelerated charge transport is then examined in detail by in situ X-ray photoelectron spectroscopy(ISXPS)and density functional theory(DFT)calculations.This work presents a new idea for the synthe-sis of Cd_(x) Zn_(1-x) S solid-solution-based materials and provides a solid reference for the detailed mechanism regarding the electric field at the heterojunction interface.展开更多
The strategic design and synthesis of photothermal/photocatalytic materials are pivotal to realizing photothermal conversion water evaporation coupled with photocatalytic sewage purification functions.In this work,bas...The strategic design and synthesis of photothermal/photocatalytic materials are pivotal to realizing photothermal conversion water evaporation coupled with photocatalytic sewage purification functions.In this work,based on the principle of three primary colors,brick-red g-C_(3)N_(4)/Ag_(2)CrO_(4)composite was loaded onto a green polyurethane(PU)sponge using polyvinyl alcohol(PVA)as the linking agent.The resultant PU/PVA/g-C_(3)N_(4)/Ag_(2)CrO_(4)composite exhibits outstanding performance in simultaneous photothermal/photocatalytic water evaporation,pollutant degradation,sterilization,and thermoelectric generation.Under 1.0 kW m^(-2)irradiation,the water evaporation rate reaches 3.19 kg m^(-2)h-1,while a single thermoelectric module generates a maximum thermoelectric output power of 0.25 W m^(-2).Concurrently,rhodamine B(RhB)at a concentration of 4.0×10^(-4)mol L^(-1)undergoes complete photocatalytic degradation within 40 min.When the light intensity is 2.0 kW m^(-2),the evaporation rate soars to 8.52 kg m^(-2)h^(-1),and the thermoelectric power output increases to 1.1 W m^(-2).Furthermore,this photothermal/photocatalytic material based on the principle of three primary colors has excellent photothermal/photocatalytic antibacterial activity against Escherichia coli.By abandoning black light-absorbing materials,more active sites of the photocatalyst can be exposed.The g-C_(3)N_(4)/Ag_(2)CrO_(4)heterojunction accelerates the separation of photogenerated carriers,while the hydrophilic groups in the photothermal/photocatalytic materials reduce the water evaporation enthalpy.This research provides a novel approach for fabricating multi-function photothermal/photocatalytic materials,which could quicken the development of solution to freshwater and electricity energy shortages as well as environmental pollution issues.展开更多
The application of photocatalytic technology in algae killing is limited by the non-floatability and difficulty in recycling of the photocatalysts.Loading photocatalyst on magnetic or floatable carriers is the most po...The application of photocatalytic technology in algae killing is limited by the non-floatability and difficulty in recycling of the photocatalysts.Loading photocatalyst on magnetic or floatable carriers is the most popular method for overcoming the above inadequacies.In this work,a CdZnS/TiO_(2) membrane photocatalyst with adjustable suspended depth(include floating)and flexible assembly is designed,which is less prone to dislodgement due to in situ synthesis and has a wider range of applicability than previously reported photocatalysts.The photocatalytic removal of Microcystis aeruginosa revealed that the suspended depth and distribution format of the CdZnS/TiO_(2) membrane photocatalysts have striking effects on the photocatalytic removal performance of Microcystis aeruginosa,the photocatalytic removal efficiency of CdZnS/TiO_(2)-2 membrane photocatalysts for Microcystis aeruginosa could reach to 98.6%in 60 min when the photocatalysts assembled in the form of 3×3 arrays suspended at a depth of 2 cm from the liquid surface.A tiny amount of TiO_(2) loading allows the formation of Z-Scheme heterojunction,resulting in accelerating the separation efficiency of photogenerated carriers,preserving the photogenerated electrons and holes with stronger reduction and oxidation ability and inhabiting the photo-corrosion of CdZnS.展开更多
Defect engineering in metal organic frameworks(MOFs)has captured significant attention in the field of photocatalysis.A series of UiO-66(Ce)(UiO=University of Oslo)MOFs with different contents of missing-linker defect...Defect engineering in metal organic frameworks(MOFs)has captured significant attention in the field of photocatalysis.A series of UiO-66(Ce)(UiO=University of Oslo)MOFs with different contents of missing-linker defects have been developed for the photocatalytic selective oxidation of benzylamine(BA)and thioanisole(TA)under visible light.The introduction of missing-linker defects promotes the formation of unsaturated Ce sites with a high Ce3+content.It also generates a high concentration of oxygen vacancies.In situ Fourier transform infrared spectroscopy(FTIR)results revealed that BA and TA molecules were activated on coordinatively unsaturated Ce sites via the H-N…Ce and the C-S…Ce interactions,respectively.Simulated in situ electron paramagnetic resonance(EPR)data indicate that O_(2) activation and reduction occur at coordinatively unsaturated Ce^(3+)sites to form·O_(2)^(-).This is accelerated by the Ce^(3+)/Ce^(4+)redox cycle associated with the photogenerated electrons.The corresponding photogenerated holes are involved in the deprotonation of the activated BA and TA.The most active sample exhibits 98.4%and 95.5%conversion rates for BA and TA oxidation.Mechanisms for the molecular activation are proposed at the molecular level.展开更多
Doping engineering is an effective strategy for graphitic carbon nitride(g-C_(3)N_(4))to improve its photocat-alytic hydrogen evolution reaction(HER)performance.In this work,a novel nitrogen and sulfur co-doped g-C_(3...Doping engineering is an effective strategy for graphitic carbon nitride(g-C_(3)N_(4))to improve its photocat-alytic hydrogen evolution reaction(HER)performance.In this work,a novel nitrogen and sulfur co-doped g-C_(3)N_(4)(N,S-g-C_(3)N_(4))is elaborately designed on the basis of theoretical predictions of first-principle density functional theory(DFT).The calculated Gibbs free energy of adsorbed hydrogen(ΔGH∗)for N,S-g-C_(3)N_(4) at the N-doping active sites is extremely close to zero(0.01 eV).Inspired by the theoretical predictions,the N,S-g-C_(3)N_(4) is successfully fabricated through ammonia-rich pyrolysis synthesis strategy,in which ammonia is in-situ obtained by pyrolyzing melamine.Subsequent characterizations indicate that the N,S-g-C_(3)N_(4) possesses high specific surface area,outstanding light utilization,good hydrophilicity,and efficient carrier transfer efficiency.Consequently,the N,S-g-C_(3)N_(4) displays an extremely high H2 evolution rate of 8269.9μmol g−1 h−1,achieves an apparent quantum efficiency(AQE)of 3.24%,and also possesses outsatnding durability.Theoretical calculations further demonstrate that N and S dopants can not only introduce doping energy level to reduce the band gap,but also induce charge redistribution to facilitate hydrogen adsorption,thus promoting the photocatalytic HER process.Moreover,femtosecond transient absorption(fs-TA)spectroscopy further corroborates the efficient photogenerated carrier transport of N,S-g-C_(3)N_(4).This research highlights a promising and reliable strategy to achieve superior photocatalytic activity,and exhibits significant guidance for precise designing high-efficiency photocatalysts.展开更多
基金Supported by the Doctoral Research Start-up Project of Yuncheng University(YQ-2023067)Project of Shanxi Natural Science Foundation(202303021211189)+1 种基金Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Provinces(20220036)Shanxi ProvinceIntelligent Optoelectronic Sensing Application Technology Innovation Center and Shanxi Province Optoelectronic Information Science and TechnologyLaboratory,Yuncheng University.
文摘In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.
文摘The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor featuring a broad spectral absorption range,is successfully employed as the electron acceptor to combine with CdS for constructing a S-scheme heterojunction.The optimized photocatalyst(CdSCuO2∶1)delivers an exceptional hydrogen evolution rate of 18.89 mmol/(g·h),4.15-fold higher compared with bare CdS.X-ray photoelectron spectroscopy(XPS)and ultraviolet-visible diffuse reflection absorption spectroscopy(UV-vis DRS)confirmed the S-scheme band structure of the composites.Moreover,the surface photovoltage(SPV)and electron paramagnetic resonance(EPR)indicated that the photogenerated electrons and photogenerated holes of CdS-CuO2∶1 were respectively transferred to the conduction band(CB)of CdS with a higher reduction potential and the valence band(VB)of CuO with a higher oxidation potential under illumination,as expected for the S-scheme mechanism.Density-functional-theory calculations of the electron density difference(EDD)disclose an interfacial electric field oriented from CdS to CuO.This built-in field suppresses charge recombination and accelerates carrier migration,rationalizing the markedly enhanced PHE activity.This study offers a novel strategy for designing S-scheme heterojunctions with high light harvesting and charge utilization toward sustainable solar-tohydrogen conversion.
基金financial support from the National Key Research and Development Program of China(2018YFA0703400)the Fundamental Research Funds for the Provincial Universities of Zhejiang(GK239909299001021)+1 种基金the Ninth China Association for Science and Technology Youth Talent Lift Project Support Plan(KYZ015324002)the Changjiang Scholars Program of Chinese Ministry of Education。
文摘Atomic surfaces are strictly required by high-performance devices of diamond.Nevertheless,diamond is the hardest material in nature,leading to the low material removal rate(MRR)and high surface roughness during machining.Noxious slurries are widely used in conventional chemical mechanical polishing(CMP),resulting in the possible pollution to the environment.Moreover,the traditional slurries normally contain more than four ingredients,causing difficulties to control the process and quality of CMP.To solve these challenges,a novel green CMP for single crystal diamond was developed,consisting of only hydrogen peroxide,diamond abrasive and Prussian blue(PB)/titania catalyst.After CMP,atomic surface is achieved with surface roughness Sa of 0.079 nm,and the MRR is 1168 nm·h^(-1).Thickness of damaged layer is merely 0.66 nm confirmed by transmission electron microscopy(TEM).X-ray photoelectron spectroscopy,electron paramagnetic resonance and TEM reveal that·OH radicals form under ultraviolet irradiation on PB/titania catalyst.The·OH radicals oxidize diamond,transforming it from monocrystalline to amorphous atomic structure,generating a soft amorphous layer.This contributes the high MRR and formation of atomic surface on diamond.The developed novel green CMP offers new insights to achieve atomic surface of diamond for potential use in their high-performance devices.
文摘Solar-driven photocatalytic hydrogen production via water splitting is considered as one of the most promising green and sustainable strategies,with the potential to replace traditional fossil fuels[1,2].Generally,this photocatalytic reaction process includes the following steps:First,the semiconductor photocatalyst is photoexcited to generate photoinduced excitons on a femtosecond timescale.Next,the photoinduced excitons are separated into photogenerated electrons and holes,occurring within a femtosecond to picosecond timescale.Subsequently,only a small fraction of the photogenerated electrons and holes can overcome kinetic barriers,such as phonon scattering and bulk defects,to migrate to the surface。
基金the financial support from the Natural Science Foundation of Tianjin(23JCZDJC00140)the National Natural Science Foundation of China(22204119,22309090,22474089)the Program of Science and Technology Plan of the City of Tianjin(22ZYJDSS00070,24JRRCRC00040)。
文摘Although organic photovoltaic nanoparticles(OPV-NPs)have demonstrated great potential for achieving high-performance photocatalytic hydrogen evolution,the long-term stability still faces insurmountable challenges.To address these issues,the all-polymer strategy is adopted for the first time by using polymeric donor PM6 and acceptor ZC-1 to construct heterojunction OPV-NPs.Compared to its monomer of CH-1,ZC-1 shows a smaller exciton binding energy and reorganization energy,a better interpenetrating donor-acceptor network,more efficient charge transfer,etc.As a result,PM6:ZC-1-based OPV-NPs achieve an impressive hydrogen evolution rate(HER)of 145.1 mmol g^(-1)h^(-1)under simulated sunlight irradiation,much better than 6.7 mmol g^(-1)h^(-1)for PM6:CH-1.More excitingly,PM6:ZC-1-based OPVNPs exhibit a significantly improved operational durability of~97%during a 32-hour cyclic stability evaluation compared to only~30%for PM6:CH-1,which should be attributed to the markedly limited molecular diffusion in OPV-NPs.Our findings firstly underscore the effectiveness in improving the continuous operational stability of OPV-NPs by adopting an all-polymer methodology.
基金supported by the National Natural Science Foundation Joint Fund(Nos.U1806223 and U2106226)the National Natural Science Foundation of China(No.52371081)the Key Technology Research and Development Program of Shandong Province(No.2020CXGC010703).
文摘The defect regulation and p-n heterojunction of composites have gained significant attention due to their potential applications.Nitrogen(N)as doping heteroatoms and perylene-3,4,9,10-tetracarboximide(PDINH)as an appropriate n-type semiconductor were innovatively and reasonably selected to enhance the photocatalytic performance of pristine p-type cuprous oxide(Cu_(2)O).In this study,the defect regula-tion of N doping(1)achieved the small-size effect of Cu_(2)O,(2)optimized the electron features,and(3)improved the kinetics of reactive oxygen species.The p-n heterojunction with PDINH was developed to sharply improve the light utilization of Cu_(2)O,from the UV region to the near-infrared region.As expected,the optimized Cu_(2)N_(x)O_(1–x)/PDINH(x=0.02)exhibited excellent long-term photocatalytic antibacterial ac-tivities,with antibacterial rates exceeding 91%against Staphylococcus aureus and Pseudomonas aeruginosa.Defect regulation and p-n heterojunction of Cu_(2)O-based composites thus provide a great deal of potential for future advancements in photocatalysis.
文摘The rapid recombination of photogenerated carriers poses a significant limitation on the use of CdS quantum dots(QDs)in photocatalysis.Herein,the construction of a novel S-scheme heterojunction between cubic-phase CdS QDs and hollow nanotube In_(2)O_(3)is successfully achieved using an electrostatic self-assembly method.Under visible light irradiation,all CdS-In_(2)O_(3)composites exhibit higher hydrogen evolution efficiency compared to pure CdS QDs.Notably,the photocatalytic H_(2)evolution rate of the optimal CdS-7%In_(2)O_(3)composite is determined to be 2258.59μmol g^(−1)h^(−1),approximately 12.3 times higher than that of pure CdS.The cyclic test indicates that the CdS-In_(2)O_(3)composite maintains considerable activity even after 5 cycles,indicating its excellent stability.In situ X-ray photoelectron spectroscopy and density functional theory calculations confirm that carrier migration in CdS-In_(2)O_(3)composites adheres to a typical S-scheme heterojunction mechanism.Additionally,a series of characterizations demonstrate that the formation of S-scheme heterojunctions between In_(2)O_(3)and CdS inhibits charge recombination and accelerates the separation and migration of photogenerated carriers in the CdS QDs,thus achieving enhanced photocatalytic performance.This work elucidates the pivotal role of S-scheme heterojunctions in photocatalytic H_(2)production and offers novel insights into the construction of effective composite photocatalysts.
基金financial supports pro-vided by the National Natural Science Foundation of China(No.21905279)the Natural Science Foundation of Fujian Province(No.2020J05086).
文摘Small-sized Cd_(x) Zn_(1-x) S solid solution nanomaterial is an important candidate for efficient photocatalytic hydrogen evolution(PHE),but it still suffers from easy agglomeration,severe photo corrosion,and fast photogenerated electron-hole recombination.To tackle these issues,herein,we propose a new strategy to modify Cd_(x) Zn_(1-x) S nanoreactors by the simultaneous utilization of ionic-liquid-assisted morphology engineering and MXene-incorporating method.That is,we designed and synthesized a novel hierarchi-cal Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction composite through the in-situ deposition of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets on unique IL-modified Ti_(3) C_(2) MXenes by a one-pot solvothermal method for efficiently PHE.The unique construction strategy tailors the thickness of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets and prevents them from stacking and agglomeration,and especially,optimizes their charge transfer pathways during the photocatalytic process.Compared with pristine Cd_(0.8) Zn_(0.2) S nanosheets,Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) has abun-dant photogenerated electrons available on the Ti_(3) C_(2) surface for proton reduction reaction,owing to the absence of deep-trapped electrons,suppression of electron-hole recombination in Cd_(0.8) Zn_(0.2) S and high-efficiency charge separation at the Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction interface.Moreover,the hy-drophilicity,electrical conductivity,visible-light absorption capacity,and surficial hydrogen desorption of Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) heterostructure are significantly improved.As a result,the heterostructure exhibits out-standing photocatalytic stability and super high apparent quantum efficiency,being rendered as one of the best noble-metal-free Cd-Zn-S-based photocatalysts.This work illustrates the mechanisms of mor-phology control and heterojunction construction in controlling the catalytic behavior of photocatalysts and highlights the great potential of the IL-assisted route in the synthesis of high-performance MXene-based heterostructures for photocatalytic hydrogen evolution.
基金supported by the National Natural Science Foundation of China(No.U2067212)the National Science Fund for Distinguished Young Scholars(No.21925603).
文摘A sp^(2) carbon-conjugated covalent organic framework (BDATN) was modified through γ-ray radiation reduction and subsequent acidification with hydrochloric acid to yield a novel functional COF (named rBDATN-HCl) for Cr(Ⅵ) removal.The morphology and structure of rBDATN-HCl were analyzed and identified by SEM,FTIR,XRD and solid-state13C NMR.It is found that the active functional groups,such as hydroxyl and amide,were introduced into BDATN after radiation reduction and acidification.The prepared rBDATN-HCl demonstrates a photocatalytic reduction removal rate of Cr(Ⅵ) above 99%after 60min of illumination with a solid-liquid ratio of 0.5 mg/mL,showing outstanding performance,which is attributed to the increase of dispersibility and adsorption sites of r BDATN-HCl.In comparison to the cBDATN-HCl synthesized with chemical reduction,rBDATN-HCl exhibits a better photoreduction performance for Cr(Ⅵ),demonstrating the advantages of radiation preparation of rBDATN-HCl.It is expected that more functionalized sp^(2) carbon-conjugated COFs could be obtained by this radiation-induced reduction strategy.
文摘Photocatalysis provides a promising solution to the worldwide shortages of energy and industrially important raw materials by utilizing sunlight for coupled hydrogen(H_(2))production with controllable organic transformation.Herein,we demonstrate that PtFeNiCoCu high-entropy alloy(HEA)nanocrystals can act as efficient cocatalysts for H_(2)evolution coupled with selective oxidation of cinnamyl alcohol to cinnamaldehyde by cubic cadmium sulfide(CdS)quantum dots(QDs)with uniform sizes of 4.0±0.5 nm.HEA nanocrystals were prepared via a simple solvothermal approach,and were successfully integrated with CdS QDs by an electrostatic self-assembly method to construct HEA/CdS composites.The optimized HEA/CdS sample presented an enhanced photocatalytic H_(2)production rate of 7.15 mmol g^(-1)h^(-1),which was 13 times that of pure CdS QDs.Moreover,a cinnamyl alcohol conversion of 96.2%with cinnamaldehyde selectivity of 99.5%was achieved after photoreaction for 3 h.The integration of HEA with CdS QDs extended the optical absorption edge from 475 to 484 nm.From d-band center analysis,Pt atoms in the HEA are the active sites for H_(2)evolution,exhibiting higher catalytic activity than pure Pt.Meanwhile,the band structure of the CdS QDs enables the oxidative transformation of cinnamyl alcohol to cinnamaldehyde with high selectivity.Moreover,femtosecond transient absorption spectroscopy shows that HEA can significantly promote the separation of photogenerated carriers in CdS,which is vital for achieving enhanced photocatalytic activity.This work inspires atomic-level design of photocatalytic materials for coordinated production of green energy carriers and value-added products.
文摘The issues of fossil energy shortage and environmental pollution caused by the excessive consumption of conventional fossil fuels necessitates the exploration of renewable and clean energy sources such as hydrogen,which is viable alternative to traditional energy sources in view of its high energy density and nonpolluting nature.In this regard,photocatalytic technology powered by inexhaustible solar energy is an ideal hydrogen production method.The recently developed copper-and zinc-based multinary metal sulfide(MMS)semiconductor photocatalysts exhibit the advantages of suitable bandgap,wide light-harvesting range,and flexible elemental composition,thus possessing great potential for achieving considerable photocatalytic hydrogen evolution(PHE)performance.Despite great progress has been achieved,the current photocatalysts still cannot meet the commercial application demands,which highlights the mechanisms understanding and optimization strategies for efficient PHE.Herein,the basic mechanisms of PHE,and effective optimization strategies are firstly introduced.Afterwards,the research process and the performance of copper-and zinc-based MMS photocatalysts,are thoroughly reviewed.Finally,the unresolved issues,and challenges hindering the achievement of overall water splitting have been discussed.
基金supported by the National Key R&D Program of China(No.2022YFA1502902)the National Natural Science Foundation of China(Nos.U21A20286 and 22475152)+2 种基金the Natural Science Foundation of Tianjin City(No.17JCJQJC43800)the Programme of Introducing Talents of Discipline to Universities(111 Project)Tianjin Research Innovation Project for Postgraduate Students(No.2022BKY156).
文摘Halide perovskite-based heterojunctions have emerged as promising candidates for solar energy conversion and storage due to their unique photophysical properties.However,the current bottleneck lies in the insufficient separation of photogenerated carriers at the interface,primarily due to challenges in the controllable growth of perovskite on the substrate.Herein,we present a growth strategy for depositing lead-free Cs_(3)Sb_(2)Br_(9)perovskite nanocrystals onto the surface of Co_(3)O_(4)with the assistance of polyacrylic acid(PAA),generating a step-scheme(S-scheme)heterojunction denoted as Co_(3)O_(4)-Cs_(3)Sb_(2)Br_(9).The utilization of PAA as a template can effectively regulate the nucleation and growth of Cs_(3)Sb_(2)Br_(9),thereby significantly enhancing the charge separation efficiency of the Co_(3)O_(4)-Cs_(3)Sb_(2)Br_(9)heterojunction compared to its counterpart formed without PAA assistance.Under simulated solar light irradiation(100 mW·cm^(-2)),the cerium-doped Co_(3)O_(4)-Cs_(3)Sb_(2)Br_(9)heterojunction exhibits excellent photocatalytic CO_(2)reduction activity without the need for any sacrificial agent.Specifically,the CO yield reaches up to 700.7μmol·g^(-1)·h^(-1),marking a 2.8-fold increase over the sample synthesized without PAA mediation.This polymer-assisted in-situ growth strategy should open up a new avenue for designing and developing more efficient photocatalytic materials based on halide perovskites.
文摘Photocatalytic hydrogen production technology is an ideal approach to addressing energy and environmental issues,with efficient charge transfer being the key to achieving high-performance hydrogen production.Ultra-thin CuInS_(2)nanosheets were prepared through a solvothermal method.Subsequently,metallic Ni was surface-modified onto CuInS_(2)through photo-deposition to serve as a co-catalyst.The optimized photocatalyst exhibited a hydrogen production rate of 15.5 mmol·g^(-1)·h^(-1)in water when used an ascorbic acid as hole scavenger,which is 9 times that of the original CuInS_(2).Transient absorption spectra(TAS)analysis demonstrates that the hole transfer from CuInS_(2)nanosheets to ascorbic acid,yielding a long-lived electron with a lifetime of 45.6μs.The electrons in CuInS_(2)are efficiently captured by Ni as active sites for driving hydrogen evolution.In situ TAS further indicates that ascorbic acid and Ni sites synergistically promote the electron transfer dynamics of CuInS_(2),achieving an electron transfer efficiency of 48.4%.This work provides a viable strategy for designing highly efficient photocatalysts with enhanced charge transfer.
基金financially supported by the National Key Re-search and Development Program of China(Nos.2022YFB3803600 and 2022YFE0115900)the National Natural Science Foundation of China(Nos.U24A2071,22278324,22238009,22361142704,22202187,and U23A20102)+1 种基金the National Science Foundation of Hubei Province of China(No.2022CFA001)Key R&D Program Projects in Hubei Province(No.2023BAB113).
文摘S-scheme heterojunctions have gained widespread application in photocatalytic reactions due to their dis-tinctive carrier transport mechanism and remarkable redox capabilities.However,a significant challenge persists in extending carrier lifetimes while simultaneously enhancing light absorption,both of which are essential for optimizing photocatalytic activity.Herein,we report the solvothermal synthesis of ul-trathin CdS nanosheets grown in situ on two-dimensional(2D)Ni-MOF to construct 2D/2D S-scheme heterojunctions.Comprehensive characterizations reveal that the incorporation of Ni-MOF(metal-organic framework)with ligand-to-metal charge transfer(LMCT)states not only broadens optical absorption but also significantly prolongs carrier lifetimes.This synergistic enhancement,coupled with the S-scheme charge transport mechanism,enables the composite to function as a bifunctional catalyst for photocat-alytic hydrogen production and simultaneous benzylamine coupling.The optimal system demonstrates an impressive hydrogen evolution rate of 8.5 mmol g^(-1) h^(-1) and an N-benzylidenebenzylamine yield of 4.6 mmol g^(-1) h^(-1) without requiring a cocatalyst.This work underscores the potential of integrating MOFs with LMCT states into S-scheme heterojunctions to enhance interfacial charge transfer,offering valuable insights for the design of S-scheme heterojunctions for artificial photosynthesis and related fields.
基金funded by the National Natural Science Foundation of China(No.42076044)the Key Research Program of Frontier Sciences,CAS(No.ZDBS-LY-DQC025)+5 种基金the Key R&D Program of Shandong Province,China(No.2022CXPT027)the Chinese Academy of Sciences President’s International Fellowship Initiative(No.2023VEA0007)the Postdoctoral Fellowship Program of CPSF(No.GZB20230769)the China Postdoctoral Science Foundation(No.2023M743529)the Shandong Postdoctoral Science Foundation(No.SDBX202302014)Excellent Postdoctoral Incentive Program of Chinese Academy of Sciences,and Qingdao Postdoctoral Science Foundation(No.QDBSH20230202117).
文摘Bacterial contamination and marine biofouling are directly or indirectly impacting the economy,environment,and human health worldwide.Photocatalytic sterilization and antifouling technology is an effective method to prevent microbial contamination and corrosion.Due to its eco-friendly nature,broad-spectrum bactericidal properties,and high efficiency,this method has recently received much attention.In this review,we have comprehensively discussed the photoinduced charge carriers transfer,main reactive oxygen species(ROS),the interactions among photocatalysts and microorganisms,as well as various antibacterial mechanisms such as oxidative stress,physical/mechanical destruction,photothermal effect,piezoelectric field effect,and triboelectric field.Different types of semiconductors,including TiO_(2),ZnO,CeO_(2),Cu-based semiconductors,Bi-based semiconductors,Ag-based semiconductors,g-C_(3)N_(4),MOF,and containing phosphorus photocatalysts are summarized in photocatalytic sterilization and antifouling activity.Besides,various improvement methods including morphological control,crystallizing,doping engineering,loading cocatalyst,and constructing heterojunction are discussed.Furthermore,a strategy for dramatically improving practice applications is proposed for the possibility of further antifouling applications.Challenges and prospects for the photocatalytic sterilization and antifouling method are also discussed to highlight design considerations.
基金financially supported by the National Key Re-search and Development Program of China[No.2022YFF1202500,2022YFF1202502]the National Natural Science Foundation of China[62071459]+1 种基金the Subject arrangement Foundation of Shen-zhen[No.JCYJ20180507182057026]the International Science and Technology Cooperation Project of Bingtuan[No.2022BC008]。
文摘The difficulty in fabricating a multifaceted composite heterojunction system based on Cd_(x) Zn_(1-x) S limits the enhancement of photocatalytic performance.In the present scrutiny,novel ZnO/Cd_(x) Zn_(1-x) S/CdS com-posite heterojunctions are successfully prepared by the alkaline dissolution etching method.The internal electric field at the interface of I-type and Z-scheme heterojunction improved the effective charge sepa-ration.The ZC 8 sample exhibits excellent photocatalytic performance and the H2 production efficiency is 15.67 mmol g^(−1) h^(−1) with good stability up to 82.9%in 24-hour cycles.The performance of CH_(4) and CO capacity in the CO_(2) RR process is 3.47μmol g^(−1) h^(−1) and 23.5μmol g^(−1) h^(−1),respectively.The photogener-ated accelerated charge transport is then examined in detail by in situ X-ray photoelectron spectroscopy(ISXPS)and density functional theory(DFT)calculations.This work presents a new idea for the synthe-sis of Cd_(x) Zn_(1-x) S solid-solution-based materials and provides a solid reference for the detailed mechanism regarding the electric field at the heterojunction interface.
基金supported by the National Natural Science Foundation of China(52372234)the Research Foundation for Talented Scholars of Linyi University(Z6122010).
文摘The strategic design and synthesis of photothermal/photocatalytic materials are pivotal to realizing photothermal conversion water evaporation coupled with photocatalytic sewage purification functions.In this work,based on the principle of three primary colors,brick-red g-C_(3)N_(4)/Ag_(2)CrO_(4)composite was loaded onto a green polyurethane(PU)sponge using polyvinyl alcohol(PVA)as the linking agent.The resultant PU/PVA/g-C_(3)N_(4)/Ag_(2)CrO_(4)composite exhibits outstanding performance in simultaneous photothermal/photocatalytic water evaporation,pollutant degradation,sterilization,and thermoelectric generation.Under 1.0 kW m^(-2)irradiation,the water evaporation rate reaches 3.19 kg m^(-2)h-1,while a single thermoelectric module generates a maximum thermoelectric output power of 0.25 W m^(-2).Concurrently,rhodamine B(RhB)at a concentration of 4.0×10^(-4)mol L^(-1)undergoes complete photocatalytic degradation within 40 min.When the light intensity is 2.0 kW m^(-2),the evaporation rate soars to 8.52 kg m^(-2)h^(-1),and the thermoelectric power output increases to 1.1 W m^(-2).Furthermore,this photothermal/photocatalytic material based on the principle of three primary colors has excellent photothermal/photocatalytic antibacterial activity against Escherichia coli.By abandoning black light-absorbing materials,more active sites of the photocatalyst can be exposed.The g-C_(3)N_(4)/Ag_(2)CrO_(4)heterojunction accelerates the separation of photogenerated carriers,while the hydrophilic groups in the photothermal/photocatalytic materials reduce the water evaporation enthalpy.This research provides a novel approach for fabricating multi-function photothermal/photocatalytic materials,which could quicken the development of solution to freshwater and electricity energy shortages as well as environmental pollution issues.
基金financially supported by the Natural Science Foundation of ShanDong(Nos.ZR2023QD152 and ZR2021MD002).
文摘The application of photocatalytic technology in algae killing is limited by the non-floatability and difficulty in recycling of the photocatalysts.Loading photocatalyst on magnetic or floatable carriers is the most popular method for overcoming the above inadequacies.In this work,a CdZnS/TiO_(2) membrane photocatalyst with adjustable suspended depth(include floating)and flexible assembly is designed,which is less prone to dislodgement due to in situ synthesis and has a wider range of applicability than previously reported photocatalysts.The photocatalytic removal of Microcystis aeruginosa revealed that the suspended depth and distribution format of the CdZnS/TiO_(2) membrane photocatalysts have striking effects on the photocatalytic removal performance of Microcystis aeruginosa,the photocatalytic removal efficiency of CdZnS/TiO_(2)-2 membrane photocatalysts for Microcystis aeruginosa could reach to 98.6%in 60 min when the photocatalysts assembled in the form of 3×3 arrays suspended at a depth of 2 cm from the liquid surface.A tiny amount of TiO_(2) loading allows the formation of Z-Scheme heterojunction,resulting in accelerating the separation efficiency of photogenerated carriers,preserving the photogenerated electrons and holes with stronger reduction and oxidation ability and inhabiting the photo-corrosion of CdZnS.
基金supported by the National Natural Science Foundation of China(Nos.22272026 and 22272028)the 111 Project(No.D16008)Jinhong Bi thanks the Youth Talent Support Program of Fujian Province(No.00387077).
文摘Defect engineering in metal organic frameworks(MOFs)has captured significant attention in the field of photocatalysis.A series of UiO-66(Ce)(UiO=University of Oslo)MOFs with different contents of missing-linker defects have been developed for the photocatalytic selective oxidation of benzylamine(BA)and thioanisole(TA)under visible light.The introduction of missing-linker defects promotes the formation of unsaturated Ce sites with a high Ce3+content.It also generates a high concentration of oxygen vacancies.In situ Fourier transform infrared spectroscopy(FTIR)results revealed that BA and TA molecules were activated on coordinatively unsaturated Ce sites via the H-N…Ce and the C-S…Ce interactions,respectively.Simulated in situ electron paramagnetic resonance(EPR)data indicate that O_(2) activation and reduction occur at coordinatively unsaturated Ce^(3+)sites to form·O_(2)^(-).This is accelerated by the Ce^(3+)/Ce^(4+)redox cycle associated with the photogenerated electrons.The corresponding photogenerated holes are involved in the deprotonation of the activated BA and TA.The most active sample exhibits 98.4%and 95.5%conversion rates for BA and TA oxidation.Mechanisms for the molecular activation are proposed at the molecular level.
基金supported by the National Natural Science Foun-dation of China(No.62004143)the Key R&D Program of Hubei Province(No.2022BAA084)the Natural Science Foundation of Hubei Province(No.2021CFB133).
文摘Doping engineering is an effective strategy for graphitic carbon nitride(g-C_(3)N_(4))to improve its photocat-alytic hydrogen evolution reaction(HER)performance.In this work,a novel nitrogen and sulfur co-doped g-C_(3)N_(4)(N,S-g-C_(3)N_(4))is elaborately designed on the basis of theoretical predictions of first-principle density functional theory(DFT).The calculated Gibbs free energy of adsorbed hydrogen(ΔGH∗)for N,S-g-C_(3)N_(4) at the N-doping active sites is extremely close to zero(0.01 eV).Inspired by the theoretical predictions,the N,S-g-C_(3)N_(4) is successfully fabricated through ammonia-rich pyrolysis synthesis strategy,in which ammonia is in-situ obtained by pyrolyzing melamine.Subsequent characterizations indicate that the N,S-g-C_(3)N_(4) possesses high specific surface area,outstanding light utilization,good hydrophilicity,and efficient carrier transfer efficiency.Consequently,the N,S-g-C_(3)N_(4) displays an extremely high H2 evolution rate of 8269.9μmol g−1 h−1,achieves an apparent quantum efficiency(AQE)of 3.24%,and also possesses outsatnding durability.Theoretical calculations further demonstrate that N and S dopants can not only introduce doping energy level to reduce the band gap,but also induce charge redistribution to facilitate hydrogen adsorption,thus promoting the photocatalytic HER process.Moreover,femtosecond transient absorption(fs-TA)spectroscopy further corroborates the efficient photogenerated carrier transport of N,S-g-C_(3)N_(4).This research highlights a promising and reliable strategy to achieve superior photocatalytic activity,and exhibits significant guidance for precise designing high-efficiency photocatalysts.
