The spherulitic structure and morphology development of poly(ethylene succinate)/poly(ethylene oxide) (PES/PEO) blends with one-step crystallization behavior were observed by means of polarizing optical microscope.It ...The spherulitic structure and morphology development of poly(ethylene succinate)/poly(ethylene oxide) (PES/PEO) blends with one-step crystallization behavior were observed by means of polarizing optical microscope.It was found that the pure PES spherulite in which the adequate quantity of PEO melt existed in the interlamellar regions,and the blending spherulite formed by both PES and PEO lamellae could form simultaneously.When the two types of spherulites contacted with each other the front of the blending ...展开更多
The crystallization behavior of PEOs with molecular weight of 1 Ok and 200k as well as their blends was studied in details. The results show that the lower molecular weight PEO crystallizes with faster crystallization...The crystallization behavior of PEOs with molecular weight of 1 Ok and 200k as well as their blends was studied in details. The results show that the lower molecular weight PEO crystallizes with faster crystallization rate as judged from a shorter time for completing the crystallization. On the other hand, the higher molecular weight PEO crystallizes at relatively higher temperature, indicating an early start of crystallization compared with the lower molecular weight one. The blends of these two PEOs with different blend ratios always cocrystallize during the cooling processes. It is confirmed that mixing of the 10k PEO with the 200k one is in favor of the crystallization of the system. This is not only demonstrated by the early start of the crystallization at higher crystallization temperature, and also a faster crystal growth of the blend with respect to the 200k PEO. The crystallization of the blends at higher temperature is caused by an early start of nucleation and an increment of nucleus density. This may originate from the density fluctuation of the blend and a reduction in energy barrier for nucleation. Moreover, it is found that the crystallinity of the 1 Ok PEO rich blends increases with increasing concentration of the 10k PEO. This is caused by the solvent effect of the 10k PEO toward the 200k PEO. On the other hand, the crystallinity of the 30/70 （10k/200k） PEO blend is decreased a little bit. This may be a balanced result of the improved crystallization of the 200k PEO at the expense of the high crystallization ability of the 1 Ok PEO.展开更多
For evaluation of the rheological and mechanical properties of highly filled wood plastic composites （WPCs）, polypropylene/polyethylene （PP/PE） blends were grafted with maleic anhydride （MAH） to enhance the inte...For evaluation of the rheological and mechanical properties of highly filled wood plastic composites （WPCs）, polypropylene/polyethylene （PP/PE） blends were grafted with maleic anhydride （MAH） to enhance the interfacial adhesion between wood fiber and matrix. WPCs were prepared from wood fiber up to 60 wt.% and modified PP/PE was blended by extrusion. The rheological properties were studied by using dynamic measurement. According to the strain sweep test, the linear viscoelastic region of composites in the melt was determined. The result showed that the storage modulus was independent of the strain at low strain region （〈0.1%）. The frequency sweep resuits indicated that all composites exhibited shear thinning behavior, and both the storage modulus and complex viscosity of MAH modified composites were decreased comparing to those unmodified. Flexural properties and impact strength of the prepared WPCs were measured according to the relevant standard specifications. The flexural and impact strength of the manufactured composites significantly increased and reached a maximum when MAH dosage was 1.0 wt%, whereas the flexural modulus after an initial decreased, also increased with MAH dosage. The increase in mechanical properties indicated that the presence of anhydride groups enhanced the interracial adhesion between wood fiber and PP/PE blends.展开更多
基金supported by Key Science Foundation of Education Ministry of China (No.207051)Key Lab Foundation of Anhui (No.2005383).
文摘The spherulitic structure and morphology development of poly(ethylene succinate)/poly(ethylene oxide) (PES/PEO) blends with one-step crystallization behavior were observed by means of polarizing optical microscope.It was found that the pure PES spherulite in which the adequate quantity of PEO melt existed in the interlamellar regions,and the blending spherulite formed by both PES and PEO lamellae could form simultaneously.When the two types of spherulites contacted with each other the front of the blending ...
基金financially supported by the National Natural Science Foundation of China(Nos.21274009 and 51221002)
文摘The crystallization behavior of PEOs with molecular weight of 1 Ok and 200k as well as their blends was studied in details. The results show that the lower molecular weight PEO crystallizes with faster crystallization rate as judged from a shorter time for completing the crystallization. On the other hand, the higher molecular weight PEO crystallizes at relatively higher temperature, indicating an early start of crystallization compared with the lower molecular weight one. The blends of these two PEOs with different blend ratios always cocrystallize during the cooling processes. It is confirmed that mixing of the 10k PEO with the 200k one is in favor of the crystallization of the system. This is not only demonstrated by the early start of the crystallization at higher crystallization temperature, and also a faster crystal growth of the blend with respect to the 200k PEO. The crystallization of the blends at higher temperature is caused by an early start of nucleation and an increment of nucleus density. This may originate from the density fluctuation of the blend and a reduction in energy barrier for nucleation. Moreover, it is found that the crystallinity of the 1 Ok PEO rich blends increases with increasing concentration of the 10k PEO. This is caused by the solvent effect of the 10k PEO toward the 200k PEO. On the other hand, the crystallinity of the 30/70 （10k/200k） PEO blend is decreased a little bit. This may be a balanced result of the improved crystallization of the 200k PEO at the expense of the high crystallization ability of the 1 Ok PEO.
文摘For evaluation of the rheological and mechanical properties of highly filled wood plastic composites （WPCs）, polypropylene/polyethylene （PP/PE） blends were grafted with maleic anhydride （MAH） to enhance the interfacial adhesion between wood fiber and matrix. WPCs were prepared from wood fiber up to 60 wt.% and modified PP/PE was blended by extrusion. The rheological properties were studied by using dynamic measurement. According to the strain sweep test, the linear viscoelastic region of composites in the melt was determined. The result showed that the storage modulus was independent of the strain at low strain region （〈0.1%）. The frequency sweep resuits indicated that all composites exhibited shear thinning behavior, and both the storage modulus and complex viscosity of MAH modified composites were decreased comparing to those unmodified. Flexural properties and impact strength of the prepared WPCs were measured according to the relevant standard specifications. The flexural and impact strength of the manufactured composites significantly increased and reached a maximum when MAH dosage was 1.0 wt%, whereas the flexural modulus after an initial decreased, also increased with MAH dosage. The increase in mechanical properties indicated that the presence of anhydride groups enhanced the interracial adhesion between wood fiber and PP/PE blends.
